WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB
42 objects
The MIB module describes generic Ipsec Endpoint Pair information of WatchGuard system. Mainly, the information obtained from this MIB is used to constructed topological view of IPSec security gateways that are connected by IPSec tunnels. An IPSec Endpoint Pair is a pair of security gateways that are connected with 0 or more IPSec SA's in tunnel mode. It contains information of aggregated information of tunnel mode SA's between two security gateways. An IPSec Endpoint Pair is identified by a pair of IP addresses. Therefore, if an IPSec security gateway X has 2 external IP addresses while IPsec secruity gateway Y has 3 external IP addresses, there are potentially 6 IPsec Endpoint Pairs between X and Y.
Imported Objects
| SNMPv2-SMI | enterprises Gauge32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| WATCHGUARD-SMI | watchguard |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3097.5 | IdentitywgIpsecEndpointPairModule | The MIB module describes generic Ipsec Endpoint Pair information of WatchGuard system. Mainly, the information obtained from this MIB is used to constructed to… | ||
| 1.3.6.1.4.1.3097.5.1 | IdentitywgIpsecEndpointPairMIB | current | This is the base object identifier for all IPSec tunnel branches. | |
| 1.3.6.1.4.1.3097.5.1.1 | IdentitywgIpsecEndpointPair | current | This is the base object identifier for all IPSec tunnel information. | |
| 1.3.6.1.4.1.3097.5.1.1.1 | ScalarwgIpsecEndpointPairNum | read-only | current | The total number of entries in the wgIpsecEndpointPairTable. |
| 1.3.6.1.4.1.3097.5.1.1.2 | TablewgIpsecEndpointPairTable | not-accessible | current | This is the connection table describing all current IPSec tunnels exist on this entity. |
| 1.3.6.1.4.1.3097.5.1.1.2.1 | RowwgIpsecEndpointPairEntry | not-accessible | current | An entry (conceptual row) containing the information on a IPSec tunnel between two IPSec security gateways. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.1 | ColumnwgIpsecEndpointPairIndex | read-only | current | The running index of this IPSec endpoint pair. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.2 | ColumnwgIpsecEndpointPairLocalAddr | read-only | current | The local IP address of the current IPSec ednpoint pair. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.3 | ColumnwgIpsecEndpointPairPeerAddr | read-only | current | The remote IP address of the current IPSec endpoint pair. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.4 | ColumnwgIpsecEndpointPairInSAs | read-only | current | The number of inbound IPSEC SA's within this IPSec endpoint pair.If IKE rekeys and no data stream to activate new SA, the SA statistics may be include the old … |
| 1.3.6.1.4.1.3097.5.1.1.2.1.5 | ColumnwgIpsecEndpointPairOutSAs | read-only | current | The number of outbound IPSEC SA's within this IPSec endpoint pair.If IKE rekeys and no data stream to activate new SA, the SA statistics may be include the old… |
| 1.3.6.1.4.1.3097.5.1.1.2.1.6 | ColumnwgIpsecEndpointPairInAccKbytes | read-only | current | Total inbound traffic in Kbytes since the establish of this connection. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.7 | ColumnwgIpsecEndpointPairOutAccKbytes | read-only | current | Total outound traffic in Kbytes since the establish of this connection. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.8 | ColumnwgIpsecEndpointPairInPackets | read-only | current | Total number of inbound packets since the establish of this connection. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.9 | ColumnwgIpsecEndpointPairOutPackets | read-only | current | Total number of outound packets since the establish of this connection. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.10 | ColumnwgIpsecEndpointPairDecryptErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.11 | ColumnwgIpsecEndpointPairAuthErrors | read-only | current | Total number of packets discarded due to authentication error since the establish of this connection. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.12 | ColumnwgIpsecEndpointPairReplayErrors | read-only | current | Total number of packets discarded due to replay error since the establish of this connection. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.13 | ColumnwgIpsecEndpointPairPolicyErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.14 | ColumnwgIpsecEndpointPairPadErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.15 | ColumnwgIpsecEndpointPairOtherReceiveErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.1.2.1.16 | ColumnwgIpsecEndpointPairSendErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.2 | IdentitywgIpsecEndpointPairStatistics | current | This is the base object identifier for all objects which are global counters for IPSec tunnels. | |
| 1.3.6.1.4.1.3097.5.1.2.1 | ScalarwgIpsecEndpointPairTotalInSAs | read-only | current | The total number of active inbound SA's in the entity. |
| 1.3.6.1.4.1.3097.5.1.2.2 | ScalarwgIpsecEndpointPairTotalOutSAs | read-only | current | The total number of active outbound SA's in the entity. |
| 1.3.6.1.4.1.3097.5.1.2.3 | ScalarwgIpsecEndpointPairTotalInAccKbytes | read-only | current | The total inbound IPsec traffic of this entity. |
| 1.3.6.1.4.1.3097.5.1.2.4 | ScalarwgIpsecEndpointPairTotalOutAccKbytes | read-only | current | The total outbound IPsec traffic of this entity. |
| 1.3.6.1.4.1.3097.5.1.2.5 | ScalarwgIpsecEndpointPairTotalInPackets | read-only | current | The total inbound IPsec packets of this entity. |
| 1.3.6.1.4.1.3097.5.1.2.6 | ScalarwgIpsecEndpointPairTotalOutPackets | read-only | current | The total outbound IPsec packets of this entity. |
| 1.3.6.1.4.1.3097.5.1.2.7 | ScalarwgIpsecEndpointPairTotalDecryptErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.2.8 | ScalarwgIpsecEndpointPairTotalAuthErrors | read-only | current | Total number of packets on this entity discarded due to authentication errors. |
| 1.3.6.1.4.1.3097.5.1.2.9 | ScalarwgIpsecEndpointPairTotalReplayErrors | read-only | current | Total number of packets discarded due to replay errors on this entity. |
| 1.3.6.1.4.1.3097.5.1.2.10 | ScalarwgIpsecEndpointPairTotalPolicyErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.2.11 | ScalarwgIpsecEndpointPairTotalPadErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.2.12 | ScalarwgIpsecEndpointPairTotalOtherReceiveErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.2.13 | ScalarwgIpsecEndpointPairTotalSendErrors | read-only | current | Deprecated, currently unused. |
| 1.3.6.1.4.1.3097.5.1.3 | IdentitywgIpsecEndpointPairPeerIPToTunnel | current | This is the base object identifier for all tunnels information of the policies. | |
| 1.3.6.1.4.1.3097.5.1.3.1 | ScalarwgIpsecEndpointPairPeerIPToTunnelNum | read-only | current | The total number of tunnels in the peeriptotunnel table. |
| 1.3.6.1.4.1.3097.5.1.3.2 | TablewgIpsecEndpointPairPeerIPToTunnelTable | not-accessible | current | The peeriptotunnel table in the endpointpair mib. |
| 1.3.6.1.4.1.3097.5.1.3.2.1 | RowwgIpsecEndpointPairPeerIPToTunnelEntry | not-accessible | current | An entry (conceptual row) containing the peer ip and tunnel information. |
| 1.3.6.1.4.1.3097.5.1.3.2.1.1 | ColumnwgIpsecEndpointPairPeerIPToTunnelPeerIP | read-only | current | The peer ip of the peeriptotunnel table. |
| 1.3.6.1.4.1.3097.5.1.3.2.1.2 | ColumnwgIpsecEndpointPairPeerIPToTunnelTunnelID | read-only | current | The tunnel id of the peeriptotunnel table. |