MIB Viewer

WATCHGUARD-IPSEC-SA-MON-MIB-EXT

158 objects
The MIB module describes generic IPSec objects defined in IETF working draft 'draft-ieft-ipsec-monitor-mib-01' and WatchGuard's extension.
Imported Objects
IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiAhTransform IpsecDoiAuthAlgorithm IpsecDoiEncapsulationMode IpsecDoiEspTransform IpsecDoiIdentType IpsecDoiIpcompTransform IpsecDoiSecProtocolId
RFC1213-MIBifIndex
SNMPv2-SMICounter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION TruthValue
WATCHGUARD-SMIwatchguard
OIDNameAccessStatusDescription
1.3.6.1.4.1.3097.3IdentitywgIpsecSaMonModuleThe MIB module describes generic IPSec objects defined in IETF working draft 'draft-ieft-ipsec-monitor-mib-01' and WatchGuard's extension.
1.3.6.1.4.1.3097.3.1IdentitywgIpsecSaMonitorMIBcurrentThis is the base object identifier for all IPSec branches.
1.3.6.1.4.1.3097.3.1.1IdentitywgSaTablescurrentThis is the base object identifier for all SA tables.
1.3.6.1.4.1.3097.3.1.1.1TablewgIpsecSaEspInTablenot-accessiblecurrentThe (conceptual) table containing information on IPSec inbound ESP SAs. There should be one row for every inbound ESP security association that exists in the e…
1.3.6.1.4.1.3097.3.1.1.1.1RowwgIpsecSaEspInEntrynot-accessiblecurrentAn entry (conceptual row) containing the information on a particular IPSec inbound ESP SA. A row in this table cannot be created or deleted by SNMP operations …
1.3.6.1.4.1.3097.3.1.1.1.1.1ColumnwgIpsecSaEspInAddressread-onlycurrentThe destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined…
1.3.6.1.4.1.3097.3.1.1.1.1.2ColumnwgIpsecSaEspInSpiread-onlycurrentThe security parameters index of the SA.
1.3.6.1.4.1.3097.3.1.1.1.1.3ColumnwgIpsecSaEspInDestIdread-onlycurrentThe destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payload…
1.3.6.1.4.1.3097.3.1.1.1.1.4ColumnwgIpsecSaEspInDestIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaEspInDestId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.1.1.5ColumnwgIpsecSaEspInSourceIdread-onlycurrentThe source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads tha…
1.3.6.1.4.1.3097.3.1.1.1.1.6ColumnwgIpsecSaEspInSourceIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaEspInSourceId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.1.1.7ColumnwgIpsecSaEspInProtocolread-onlycurrentThe transport-layer protocol number that this SA carries, or 0 if it carries any protocol.
1.3.6.1.4.1.3097.3.1.1.1.1.8ColumnwgIpsecSaEspInDestPortread-onlycurrentThe destination port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.1.1.9ColumnwgIpsecSaEspInSourcePortread-onlycurrentThe source port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.1.1.10ColumnwgIpsecSaEspInCreatorread-onlycurrentThe creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE,…
1.3.6.1.4.1.3097.3.1.1.1.1.11ColumnwgIpsecSaEspInEncapsulationread-onlycurrentThe type of encapsulation used by this SA.
1.3.6.1.4.1.3097.3.1.1.1.1.12ColumnwgIpsecSaEspInEncAlgread-onlycurrentA unique value representing the encryption algorithm applied to traffic or 0 if there is no encryption used.
1.3.6.1.4.1.3097.3.1.1.1.1.13ColumnwgIpsecSaEspInEncKeyLengthread-onlycurrentThe length of the encryption key in bits used for the algorithm specified in the 'wgIpsecSaEspInEncAlg' object, or 0 if the key length is implicit in the speci…
1.3.6.1.4.1.3097.3.1.1.1.1.14ColumnwgIpsecSaEspInAuthAlgread-onlycurrentA unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used.
1.3.6.1.4.1.3097.3.1.1.1.1.15ColumnwgIpsecSaEspInLimitSecondsread-onlycurrentThe maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than…
1.3.6.1.4.1.3097.3.1.1.1.1.16ColumnwgIpsecSaEspInLimitKbytesread-onlycurrentThe maximum traffic in kilobytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4…
1.3.6.1.4.1.3097.3.1.1.1.1.17ColumnwgIpsecSaEspInAccSecondsread-onlycurrentThe number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
1.3.6.1.4.1.3097.3.1.1.1.1.18ColumnwgIpsecSaEspInAccKbytesread-onlycurrentThe amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not exp…
1.3.6.1.4.1.3097.3.1.1.1.1.19ColumnwgIpsecSaEspInUserOctetsread-onlycurrentThe amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic exp…
1.3.6.1.4.1.3097.3.1.1.1.1.20ColumnwgIpsecSaEspInPacketsread-onlycurrentThe number of packets handled by the SA.
1.3.6.1.4.1.3097.3.1.1.1.1.21ColumnwgIpsecSaEspInDecryptErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.1.1.22ColumnwgIpsecSaEspInAuthErrorsread-onlycurrentThe number of packets discarded by the SA due to authentication errors.
1.3.6.1.4.1.3097.3.1.1.1.1.23ColumnwgIpsecSaEspInReplayErrorsread-onlycurrentThe number of packets discarded by the SA due to replay errors.
1.3.6.1.4.1.3097.3.1.1.1.1.24ColumnwgIpsecSaEspInPolicyErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.1.1.25ColumnwgIpsecSaEspInPadErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.1.1.26ColumnwgIpsecSaEspInOtherReceiveErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.2TablewgIpsecSaAhInTablenot-accessiblecurrentThe (conceptual) table containing information on IPSec inbound AH SAs. There should be one row for every inbound AH security association that exists in the ent…
1.3.6.1.4.1.3097.3.1.1.2.1RowwgIpsecSaAhInEntrynot-accessiblecurrentAn entry (conceptual row) containing the information on a particular IPSec inbound AH SA. A row in this table cannot be created or deleted by SNMP operations o…
1.3.6.1.4.1.3097.3.1.1.2.1.1ColumnwgIpsecSaAhInAddressread-onlycurrentThe destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined…
1.3.6.1.4.1.3097.3.1.1.2.1.2ColumnwgIpsecSaAhInSpiread-onlycurrentThe security parameters index of the SA.
1.3.6.1.4.1.3097.3.1.1.2.1.3ColumnwgIpsecSaAhInDestIdread-onlycurrentThe destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payload…
1.3.6.1.4.1.3097.3.1.1.2.1.4ColumnwgIpsecSaAhInDestIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaAhInDestId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.2.1.5ColumnwgIpsecSaAhInSourceIdread-onlycurrentThe source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads tha…
1.3.6.1.4.1.3097.3.1.1.2.1.6ColumnwgIpsecSaAhInSourceIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaAhInSourceId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.2.1.7ColumnwgIpsecSaAhInProtocolread-onlycurrentThe transport-layer protocol number that this SA carries, or 0 if it carries any protocol.
1.3.6.1.4.1.3097.3.1.1.2.1.8ColumnwgIpsecSaAhInDestPortread-onlycurrentThe destination port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.2.1.9ColumnwgIpsecSaAhInSourcePortread-onlycurrentThe source port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.2.1.10ColumnwgIpsecSaAhInCreatorread-onlycurrentThe creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE,…
1.3.6.1.4.1.3097.3.1.1.2.1.11ColumnwgIpsecSaAhInEncapsulationread-onlycurrentThe type of encapsulation used by this SA.
1.3.6.1.4.1.3097.3.1.1.2.1.12ColumnwgIpsecSaAhInAuthAlgread-onlycurrentA unique value representing the hash algorithm applied to traffic carried by this SA if it uses ESP or 0 if there is no authentication applied by ESP.
1.3.6.1.4.1.3097.3.1.1.2.1.13ColumnwgIpsecSaAhInLimitSecondsread-onlycurrentThe maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than…
1.3.6.1.4.1.3097.3.1.1.2.1.14ColumnwgIpsecSaAhInLimitKbytesread-onlycurrentThe maximum traffic in Kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294…
1.3.6.1.4.1.3097.3.1.1.2.1.15ColumnwgIpsecSaAhInAccSecondsread-onlycurrentThe number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
1.3.6.1.4.1.3097.3.1.1.2.1.16ColumnwgIpsecSaAhInAccKbytesread-onlycurrentThe amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not exp…
1.3.6.1.4.1.3097.3.1.1.2.1.17ColumnwgIpsecSaAhInUserOctetsread-onlycurrentThe amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic exp…
1.3.6.1.4.1.3097.3.1.1.2.1.18ColumnwgIpsecSaAhInPacketsread-onlycurrentThe number of packets handled by the SA.
1.3.6.1.4.1.3097.3.1.1.2.1.19ColumnwgIpsecSaAhInAuthErrorsread-onlycurrentThe number of packets discarded by the SA due to authentication errors.
1.3.6.1.4.1.3097.3.1.1.2.1.20ColumnwgIpsecSaAhInReplayErrorsread-onlycurrentThe number of packets discarded by the SA due to replay errors.
1.3.6.1.4.1.3097.3.1.1.2.1.21ColumnwgIpsecSaAhInPolicyErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.2.1.22ColumnwgIpsecSaAhInOtherReceiveErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3TablewgIpsecSaIpcompInTablenot-accessiblecurrentThe (conceptual) table containing information on IPSec inbound IPCOMP SAs. There should be one row for every inbound IPCOMP (security) association that exists …
1.3.6.1.4.1.3097.3.1.1.3.1RowwgIpsecSaIpcompInEntrynot-accessiblecurrentAn entry (conceptual row) containing the information on a particular IPSec inbound IPCOMP SA. A row in this table cannot be created or deleted by SNMP operatio…
1.3.6.1.4.1.3097.3.1.1.3.1.1ColumnwgIpsecSaIpcompInAddressread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.2ColumnwgIpsecSaIpcompInCpiread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.3ColumnwgIpsecSaIpcompInDestIdread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.4ColumnwgIpsecSaIpcompInDestIdTyperead-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.5ColumnwgIpsecSaIpcompInSourceIdread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.6ColumnwgIpsecSaIpcompInSourceIdTyperead-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.7ColumnwgIpsecSaIpcompInProtocolread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.8ColumnwgIpsecSaIpcompInDestPortread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.9ColumnwgIpsecSaIpcompInSourcePortread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.10ColumnwgIpsecSaIpcompInCreatorread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.11ColumnwgIpsecSaIpcompInEncapsulationread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.12ColumnwgIpsecSaIpcompInDecompAlgread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.13ColumnwgIpsecSaIpcompInSecondsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.14ColumnwgIpsecSaIpcompInUserOctetsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.15ColumnwgIpsecSaIpcompInPacketsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.16ColumnwgIpsecSaIpcompInDecompErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.3.1.17ColumnwgIpsecSaIpcompInOtherReceiveErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.4TablewgIpsecSaEspOutTablenot-accessiblecurrentThe (conceptual) table containing information on IPSec Outbound ESP SAs. There should be one row for every outbound ESP security association that exists in the…
1.3.6.1.4.1.3097.3.1.1.4.1RowwgIpsecSaEspOutEntrynot-accessiblecurrentAn entry (conceptual row) containing the information on a particular IPSec Outbound ESP SA. A row in this table cannot be created or deleted by SNMP operations…
1.3.6.1.4.1.3097.3.1.1.4.1.1ColumnwgIpsecSaEspOutAddressread-onlycurrentThe destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined…
1.3.6.1.4.1.3097.3.1.1.4.1.2ColumnwgIpsecSaEspOutSpiread-onlycurrentThe security parameters index of the SA.
1.3.6.1.4.1.3097.3.1.1.4.1.3ColumnwgIpsecSaEspOutSourceIdread-onlycurrentThe source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads tha…
1.3.6.1.4.1.3097.3.1.1.4.1.4ColumnwgIpsecSaEspOutSourceIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaEspOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.4.1.5ColumnwgIpsecSaEspOutDestIdread-onlycurrentThe destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payload…
1.3.6.1.4.1.3097.3.1.1.4.1.6ColumnwgIpsecSaEspOutDestIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaEspOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.4.1.7ColumnwgIpsecSaEspOutProtocolread-onlycurrentThe transport-layer protocol number that this SA carries, or 0 if it carries any protocol.
1.3.6.1.4.1.3097.3.1.1.4.1.8ColumnwgIpsecSaEspOutSourcePortread-onlycurrentThe source port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.4.1.9ColumnwgIpsecSaEspOutDestPortread-onlycurrentThe destination port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.4.1.10ColumnwgIpsecSaEspOutCreatorread-onlycurrentThe creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE,…
1.3.6.1.4.1.3097.3.1.1.4.1.11ColumnwgIpsecSaEspOutEncapsulationread-onlycurrentThe type of encapsulation used by this SA.
1.3.6.1.4.1.3097.3.1.1.4.1.12ColumnwgIpsecSaEspOutEncAlgread-onlycurrentA unique value representing the encryption algorithm applied to traffic or 0 if there is no encryption used.
1.3.6.1.4.1.3097.3.1.1.4.1.13ColumnwgIpsecSaEspOutEncKeyLengthread-onlycurrentThe length of the encryption key in bits used for the algorithm specified in the 'wgIpsecSaEspOutEncAlg' object, or 0 if the key length is implicit in the spec…
1.3.6.1.4.1.3097.3.1.1.4.1.14ColumnwgIpsecSaEspOutAuthAlgread-onlycurrentA unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used.
1.3.6.1.4.1.3097.3.1.1.4.1.15ColumnwgIpsecSaEspOutLimitSecondsread-onlycurrentThe maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than…
1.3.6.1.4.1.3097.3.1.1.4.1.16ColumnwgIpsecSaEspOutLimitKbytesread-onlycurrentThe maximum traffic in kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294…
1.3.6.1.4.1.3097.3.1.1.4.1.17ColumnwgIpsecSaEspOutAccSecondsread-onlycurrentThe number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
1.3.6.1.4.1.3097.3.1.1.4.1.18ColumnwgIpsecSaEspOutAccKbytesread-onlycurrentThe amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not exp…
1.3.6.1.4.1.3097.3.1.1.4.1.19ColumnwgIpsecSaEspOutUserOctetsread-onlycurrentThe amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic exp…
1.3.6.1.4.1.3097.3.1.1.4.1.20ColumnwgIpsecSaEspOutPacketsread-onlycurrentThe number of packets handled by the SA.
1.3.6.1.4.1.3097.3.1.1.4.1.21ColumnwgIpsecSaEspOutSendErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.5TablewgIpsecSaAhOutTablenot-accessiblecurrentThe (conceptual) table containing information on IPSec Outbound AH SAs. There should be one row for every outbound AH security association that exists in the e…
1.3.6.1.4.1.3097.3.1.1.5.1RowwgIpsecSaAhOutEntrynot-accessiblecurrentAn entry (conceptual row) containing the information on a particular IPSec Outbound AH SA. A row in this table cannot be created or deleted by SNMP operations …
1.3.6.1.4.1.3097.3.1.1.5.1.1ColumnwgIpsecSaAhOutAddressread-onlycurrentThe destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined…
1.3.6.1.4.1.3097.3.1.1.5.1.2ColumnwgIpsecSaAhOutSpiread-onlycurrentThe security parameters index of the SA.
1.3.6.1.4.1.3097.3.1.1.5.1.3ColumnwgIpsecSaAhOutSourceIdread-onlycurrentThe source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads tha…
1.3.6.1.4.1.3097.3.1.1.5.1.4ColumnwgIpsecSaAhOutSourceIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaAhOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.5.1.5ColumnwgIpsecSaAhOutDestIdread-onlycurrentThe destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payload…
1.3.6.1.4.1.3097.3.1.1.5.1.6ColumnwgIpsecSaAhOutDestIdTyperead-onlycurrentThe type of identifier presented by 'wgIpsecSaAhOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.3097.3.1.1.5.1.7ColumnwgIpsecSaAhOutProtocolread-onlycurrentThe transport-layer protocol number that this SA carries, or 0 if it carries any protocol.
1.3.6.1.4.1.3097.3.1.1.5.1.8ColumnwgIpsecSaAhOutSourcePortread-onlycurrentThe source port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.5.1.9ColumnwgIpsecSaAhOutDestPortread-onlycurrentThe destination port number of the protocol that this SA carries, or 0 if it carries any port number.
1.3.6.1.4.1.3097.3.1.1.5.1.10ColumnwgIpsecSaAhOutCreatorread-onlycurrentThe creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE,…
1.3.6.1.4.1.3097.3.1.1.5.1.11ColumnwgIpsecSaAhOutEncapsulationread-onlycurrentThe type of encapsulation used by this SA.
1.3.6.1.4.1.3097.3.1.1.5.1.12ColumnwgIpsecSaAhOutAuthAlgread-onlycurrentA unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used.
1.3.6.1.4.1.3097.3.1.1.5.1.13ColumnwgIpsecSaAhOutLimitSecondsread-onlycurrentThe maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than…
1.3.6.1.4.1.3097.3.1.1.5.1.14ColumnwgIpsecSaAhOutLimitKbytesread-onlycurrentThe maximum traffic in Kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294…
1.3.6.1.4.1.3097.3.1.1.5.1.15ColumnwgIpsecSaAhOutAccSecondsread-onlycurrentThe number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
1.3.6.1.4.1.3097.3.1.1.5.1.16ColumnwgIpsecSaAhOutAccKbytesread-onlycurrentThe amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not exp…
1.3.6.1.4.1.3097.3.1.1.5.1.17ColumnwgIpsecSaAhOutUserOctetsread-onlycurrentThe amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic exp…
1.3.6.1.4.1.3097.3.1.1.5.1.18ColumnwgIpsecSaAhOutPacketsread-onlycurrentThe number of packets handled by the SA.
1.3.6.1.4.1.3097.3.1.1.5.1.19ColumnwgIpsecSaAhOutSendErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6TablewgIpsecSaIpcompOutTablenot-accessiblecurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1RowwgIpsecSaIpcompOutEntrynot-accessiblecurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.1ColumnwgIpsecSaIpcompOutAddressread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.2ColumnwgIpsecSaIpcompOutCpiread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.3ColumnwgIpsecSaIpcompOutSourceIdread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.4ColumnwgIpsecSaIpcompOutSourceIdTyperead-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.5ColumnwgIpsecSaIpcompOutDestIdread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.6ColumnwgIpsecSaIpcompOutDestIdTyperead-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.7ColumnwgIpsecSaIpcompOutProtocolread-onlycurrentThe transport-layer protocol number that this SA carries, or 0 if it carries any protocol.
1.3.6.1.4.1.3097.3.1.1.6.1.8ColumnwgIpsecSaIpcompOutSourcePortread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.9ColumnwgIpsecSaIpcompOutDestPortread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.10ColumnwgIpsecSaIpcompOutCreatorread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.11ColumnwgIpsecSaIpcompOutEncapsulationread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.12ColumnwgIpsecSaIpcompOutCompAlgread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.13ColumnwgIpsecSaIpcompOutSecondsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.14ColumnwgIpsecSaIpcompOutUserOctetsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.1.6.1.15ColumnwgIpsecSaIpcompOutPacketsread-onlycurrentThe number of packets handled by the SA.
1.3.6.1.4.1.3097.3.1.2IdentitywgSaStatisticscurrentThis is the base object identifier for all objects which are global counters for IPSec security associations.
1.3.6.1.4.1.3097.3.1.2.1ScalarwgIpsecEspCurrentInboundSAsread-onlycurrentThe current number of inbound ESP SAs in the entity.
1.3.6.1.4.1.3097.3.1.2.2ScalarwgIpsecEspTotalInboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.2.3ScalarwgIpsecEspCurrentOutboundSAsread-onlycurrentThe current number of outbound ESP SAs in the entity.
1.3.6.1.4.1.3097.3.1.2.4ScalarwgIpsecEspTotalOutboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.2.5ScalarwgIpsecAhCurrentInboundSAsread-onlycurrentThe current number of inbound AH SAs in the entity.
1.3.6.1.4.1.3097.3.1.2.6ScalarwgIpsecAhTotalInboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.2.7ScalarwgIpsecAhCurrentOutboundSAsread-onlycurrentThe current number of outbound AH SAs in the entity.
1.3.6.1.4.1.3097.3.1.2.8ScalarwgIpsecAhTotalOutboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.2.9ScalarwgIpsecIpcompCurrentInboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.2.10ScalarwgIpsecIpcompTotalInboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.2.11ScalarwgIpsecIpcompCurrentOutboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.2.12ScalarwgIpsecIpcompTotalOutboundSAsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.3IdentitywgSaErrorscurrentThis is the base object identifier for all objects which are global error counters for IPSec security associations.
1.3.6.1.4.1.3097.3.1.3.1ScalarwgIpsecDecryptionErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.3.2ScalarwgIpsecAuthenticationErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.3.3ScalarwgIpsecReplayErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.3.4ScalarwgIpsecPolicyErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.3.5ScalarwgIpsecOtherReceiveErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.3.6ScalarwgIpsecSendErrorsread-onlycurrentDeprecated, currently unused.
1.3.6.1.4.1.3097.3.1.3.7ScalarwgIpsecUnknownSpiErrorsread-onlycurrentDeprecated, currently unused.
Type Definitions
NameSyntaxStatusDescription
IpsecIpv6AddressOCTET STRING (SIZE (16)) wgIpsecSaMonitorMIB OBJECT-IDENTITY STATUS current DESCRIPTION "This is the base object identifier for all IPSec branches." ::= { wgIpsecSaMonModule 1 } wgSaTables OBJECT-IDENTITY STATUS current DESCRIPTION "This is the base object identifier for all SA tables." ::= { wgIpsecSaMonitorMIB 1 } wgSaStatistics OBJECT-IDENTITY STATUS current DESCRIPTION "This is the base object identifier for all objects which are global counters for IPSec security associations." ::= { wgIpsecSaMonitorMIB 2 } wgSaErrors OBJECT-IDENTITY STATUS current DESCRIPTION "This is the base object identifier for all objects which are global error counters for IPSec security associations." ::= { wgIpsecSaMonitorMIB 3 }currentThis data type is used to model IPv6 address prefixes. This is a binary string of 16 octets in network byte-order.
IpsecSaCreatorIdentINTEGER { unknown(0), static(1), ike(2), other(3) }currentA value indicating how an SA was created.
MIB Viewer