WATCHGUARD-SYSTEM-CONFIG-MIB
15 objects
This MIB module defines WatchGuard Firebox system configuration.
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| WATCHGUARD-SMI | watchguard |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3097.2 | IdentitywgSystemConfigMIB | This MIB module defines WatchGuard Firebox system configuration. | ||
| 1.3.6.1.4.1.3097.2.3 | IdentitywgSysTraps | current | This is the base object for system wide traps in this entity. | |
| 1.3.6.1.4.1.3097.2.3.0 | IdentitywgSysTrapsPrefix | current | ||
| 1.3.6.1.4.1.3097.2.3.0.1 | NotificationwgAlarmTrap | current | An alarm was raised by Monitoring Agent of this WatchGuard entity. | |
| 1.3.6.1.4.1.3097.2.3.0.2 | NotificationwgSnmpShutdown | current | This trap is sent when the snmp terminates. | |
| 1.3.6.1.4.1.3097.2.3.0.3 | NotificationwgSnmpStart | current | This trap is sent when the snmp starts. | |
| 1.3.6.1.4.1.3097.2.4 | IdentitywgSysTrapObjects | current | This is the base object for objects which are used as part of traps. | |
| 1.3.6.1.4.1.3097.2.4.1 | ScalarwgAlarmId | read-only | current | The id of the alarm that generates a trap. |
| 1.3.6.1.4.1.3097.2.4.2 | ScalarwgAlarmLabel | read-only | current | The name of the alarm that generates a trap. |
| 1.3.6.1.4.1.3097.2.4.3 | ScalarwgAlarmTime | read-only | current | The date and time of the alarm that generates a trap. |
| 1.3.6.1.4.1.3097.2.4.4 | ScalarwgAlarmLevel | read-only | current | The level of an alarm generated. |
| 1.3.6.1.4.1.3097.2.4.5 | ScalarwgAlarmHostname | read-only | current | The host name of the system where alarm occurred |
| 1.3.6.1.4.1.3097.2.4.6 | ScalarwgAlarmMsg | read-only | current | The message describing the nature of this alarm. |
| 1.3.6.1.4.1.3097.2.5 | IdentitywgSysTrapControl | current | This is the base object identifier for all objects which are trap control for the entity. | |
| 1.3.6.1.4.1.3097.2.5.1 | ScalarwgAlarmTrapEnable | read-only | current | Indicates whether wgAlarmTrap trap should be generated. |