WAYSTREAM-MIB
189 objects
The Waystream MIB describing iBOS functionality of ASRs
Imported Objects
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString |
| WAYSTREAM-SMI | wsExperiment wsMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9303.4.1 | Identityibos | The Waystream MIB describing iBOS functionality of ASRs | ||
| 1.3.6.1.4.1.9303.4.1.1 | IdentitywsSystem | current | System management objects | |
| 1.3.6.1.4.1.9303.4.1.1.1 | ScalarwsWritedummy | read-write | current | This object is a read-write object that accept an integer. The value written has no effect on the system, but a successful write indicate that SNMP write opera… |
| 1.3.6.1.4.1.9303.4.1.1.2 | ScalarwsReload | read-write | current | This object is used to restart the target router by setting the number of seconds until system reload. A value of 0 cancels any pending reload. The value retur… |
| 1.3.6.1.4.1.9303.4.1.1.3 | ScalarwsVersion | read-only | current | The iBOS version indicator |
| 1.3.6.1.4.1.9303.4.1.1.4 | ScalarwsAsrRevision | read-only | current | The ASR hardware revision |
| 1.3.6.1.4.1.9303.4.1.1.5 | ScalarwsVersionString | read-only | current | A textual representation of the iBOS version. For iBOS versions after 3.2, this field should be used to identify the iBOS version instead of the old wsVersion … |
| 1.3.6.1.4.1.9303.4.1.2 | IdentitywsEnvironment | current | Environtment data | |
| 1.3.6.1.4.1.9303.4.1.2.0 | NodewsIbosEnvironmentNotifications | |||
| 1.3.6.1.4.1.9303.4.1.2.0.1 | NotificationwsIbosTempLow | current | A wsIbosTempLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined low… | |
| 1.3.6.1.4.1.9303.4.1.2.0.2 | NotificationwsIbosTempHigh | current | A wsIbosTempHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined hi… | |
| 1.3.6.1.4.1.9303.4.1.2.0.3 | NotificationwsIbosVoltLow | current | A wsIbosVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined low th… | |
| 1.3.6.1.4.1.9303.4.1.2.0.4 | NotificationwsIbosVoltHigh | current | A wsIbosVoltHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined high … | |
| 1.3.6.1.4.1.9303.4.1.2.0.5 | NotificationwsIbosFanRPMLow | current | A wsIbosFanRPMLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its fans's RPM is lower than the system defined thresh… | |
| 1.3.6.1.4.1.9303.4.1.2.0.6 | NotificationwsIbosFanOutVoltLow | current | A wsIbosFanOutVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that its fan output voltage is lower than the system defined t… | |
| 1.3.6.1.4.1.9303.4.1.2.1 | TablewsTempTable | not-accessible | current | Table of values from temperature sensors. |
| 1.3.6.1.4.1.9303.4.1.2.1.1 | RowwsTempEntry | not-accessible | current | An entry for a temperature sensor. |
| 1.3.6.1.4.1.9303.4.1.2.1.1.1 | ColumnwsTempSensor | read-only | current | Sensor number. |
| 1.3.6.1.4.1.9303.4.1.2.1.1.2 | ColumnwsTempMeasured | read-only | current | Measured temperature in 100ths of degrees centigrade. |
| 1.3.6.1.4.1.9303.4.1.2.1.1.3 | ColumnwsTempTOS | read-only | current | TOS in 100ths of degrees centigrade. |
| 1.3.6.1.4.1.9303.4.1.2.1.1.4 | ColumnwsTempTHYST | read-only | current | THYST in 100ths of degrees centigrade. |
| 1.3.6.1.4.1.9303.4.1.2.1.1.5 | ColumnwsTempThresholdLow | read-only | current | Threshold (low) in 100ths of degrees centigrade. |
| 1.3.6.1.4.1.9303.4.1.2.1.1.6 | ColumnwsTempThresholdHigh | read-only | current | Threshold (high) in 100ths of degrees centigrade. |
| 1.3.6.1.4.1.9303.4.1.2.1.1.7 | ColumnwsTempStatus | read-only | current | Status (measurement compared to threshold). |
| 1.3.6.1.4.1.9303.4.1.2.2 | TablewsVoltTable | not-accessible | current | Table of measured board voltages. |
| 1.3.6.1.4.1.9303.4.1.2.2.1 | RowwsVoltEntry | not-accessible | current | An entry for a board voltage. |
| 1.3.6.1.4.1.9303.4.1.2.2.1.1 | ColumnwsVoltChannel | read-only | current | Voltage channel number. |
| 1.3.6.1.4.1.9303.4.1.2.2.1.2 | ColumnwsVoltNominal | read-only | current | Nominal voltage in mV for channel. |
| 1.3.6.1.4.1.9303.4.1.2.2.1.3 | ColumnwsVoltMeasured | read-only | current | Measured voltage in mV for channel. |
| 1.3.6.1.4.1.9303.4.1.2.2.1.4 | ColumnwsVoltThresholdLow | read-only | current | Threshold (low) voltage in mV for channel. |
| 1.3.6.1.4.1.9303.4.1.2.2.1.5 | ColumnwsVoltThresholdHigh | read-only | current | Threshold (high) voltage in mV for channel. |
| 1.3.6.1.4.1.9303.4.1.2.2.1.6 | ColumnwsVoltStatus | read-only | current | Status (measurement compared to threshold). |
| 1.3.6.1.4.1.9303.4.1.2.3 | TablewsFanTable | not-accessible | current | Table of measured rotation speeds for external fans. |
| 1.3.6.1.4.1.9303.4.1.2.3.1 | RowwsFanEntry | not-accessible | current | An entry for a fan. |
| 1.3.6.1.4.1.9303.4.1.2.3.1.1 | ColumnwsFanNumber | read-only | current | Fan number. |
| 1.3.6.1.4.1.9303.4.1.2.3.1.2 | ColumnwsFanRPM | read-only | current | Fan speed in revolutions per minute. |
| 1.3.6.1.4.1.9303.4.1.2.4 | ScalarwsFanVoltage | read-only | current | Fan driving voltage (in mV). |
| 1.3.6.1.4.1.9303.4.1.2.5 | ScalarwsIbosEnvironmentTrapEnable | read-write | current | Provides control over iBOS environment related traps. |
| 1.3.6.1.4.1.9303.4.1.3 | IdentitywsPFDP | current | PFDP data | |
| 1.3.6.1.4.1.9303.4.1.3.1 | TablewsNeighboursTable | not-accessible | current | Table of discovered PFDB Neighbours. |
| 1.3.6.1.4.1.9303.4.1.3.1.1 | RowwsNeighboursEntry | not-accessible | current | An entry for a neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.1 | ColumnwsNeighbourIfIndex | read-only | current | Neighbour interface index. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.2 | ColumnwsNeighbourNIndex | read-only | current | Neighbour index. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.3 | ColumnwsNeighbourHostname | read-only | current | Neighbour hostname. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.4 | ColumnwsNeighbourLocalIf | read-only | current | Local interface that neighbour is on. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.5 | ColumnwsNeighbourRemoteIf | read-only | current | Remote interface of neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.6 | ColumnwsNeighbourModel | read-only | current | Neighbour model. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.7 | ColumnwsNeighbourLastAct | read-only | current | Time in seconds since last neighbour advertisment. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.8 | ColumnwsNeighbourOSVersion | read-only | current | Neighbour OS version. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.9 | ColumnwsNeighbourSNPA | read-only | current | SNPA of neighbour interface. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.10 | ColumnwsNeighbourUptime | read-only | current | Uptime in seconds for neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.11 | ColumnwsNeighbourState | read-only | current | State of neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.12 | ColumnwsNeighbourDBCount | read-only | current | Database entries for neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.13 | ColumnwsNeighbourCreated | read-only | current | The value of sysUpTime at the time the neighbour first appeared on the interface. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.14 | ColumnwsNeighbourPacketsIn | read-only | current | Number of PFDP packets received from neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.1.1.15 | ColumnwsNeighbourPacketErrorsrIn | read-only | current | Number of erroneous PFDP packets received from neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.2 | TablewsNeighbourPortsTable | not-accessible | current | Table of ports of discovered PFDB Neighbours. |
| 1.3.6.1.4.1.9303.4.1.3.2.1 | RowwsNeighbourPortsEntry | not-accessible | current | An entry for a port of a neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.1 | ColumnwsNeighbourPortIfIndex | read-only | current | Neighbour interface index. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.2 | ColumnwsNeighbourPortNIndex | read-only | current | Neighbour index. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.3 | ColumnwsNeighbourPortPIndex | read-only | current | Neighbour port index. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.4 | ColumnwsNeighbourPortName | read-only | current | Name of neighbour port. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.5 | ColumnwsNeighbourPortState | read-only | current | State of neighbour port. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.6 | ColumnwsNeighbourPortTxOctets | read-only | current | The total number of good bytes of data transmitted by a port (excluding preamble but including FCS). |
| 1.3.6.1.4.1.9303.4.1.3.2.1.7 | ColumnwsNeighbourPortTxDropPkts | read-only | current | This counter is incremented every time a transmit packet is dropped due to lack of resources (e.g., transmit FIFO underflow), or an internal MAC sublayer trans… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.8 | ColumnwsNeighbourPortTxBroadcastPkts | read-only | current | The number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid mul… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.9 | ColumnwsNeighbourPortTxMulticastPkts | read-only | current | The number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid bro… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.10 | ColumnwsNeighbourPortTxUnicastPkts | read-only | current | The number of good packets transmitted by a port that are addressed to a unicast address. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.11 | ColumnwsNeighbourPortTxCollisions | read-only | current | The number of collisions experienced by a port during packet transmissions. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.12 | ColumnwsNeighbourPortTxDeferredTransmit | read-only | current | The number of packets transmitted by a port for which the first transmission attempt is delayed because the medium is busy. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.13 | ColumnwsNeighbourPortTxFrameInDisc | read-only | current | The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.14 | ColumnwsNeighbourPortRxOctets | read-only | current | The number of bytes of data received by a port (excluding preamble but including FCS), including bad packets. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.15 | ColumnwsNeighbourPortRxUndersizePkts | read-only | current | The number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS). |
| 1.3.6.1.4.1.9303.4.1.3.2.1.16 | ColumnwsNeighbourPortPkts64Octets | read-only | current | The number of packets (including error packets) that are 64 bytes long. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.17 | ColumnwsNeighbourPortPkts65to127Octets | read-only | current | The number of packets (including error packets) that are between 65 and 127 bytes long. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.18 | ColumnwsNeighbourPortPkts128to255Octets | read-only | current | The number of packets (including error packets) that are between 128 and 255 bytes long. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.19 | ColumnwsNeighbourPortPkts256to511Octets | read-only | current | The number of packets (including error packets) that are between 256 and 511 bytes long. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.20 | ColumnwsNeighbourPortPkts512to1023Octets | read-only | current | The number of packets (including error packets) that are between 512 and 1023 bytes long. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.21 | ColumnwsNeighbourPortPkts1024to1522Octets | read-only | current | The number of packets (including error packets) that are between 1024 and 1522 bytes long. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.22 | ColumnwsNeighbourPortRxOversizePkts | read-only | current | The number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.23 | ColumnwsNeighbourPortRxJabbers | read-only | current | The number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.24 | ColumnwsNeighbourPortRxAlignmentErrors | read-only | current | The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.25 | ColumnwsNeighbourPortRxFCSErrors | read-only | current | The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes inclusive, and have a bad FCS … |
| 1.3.6.1.4.1.9303.4.1.3.2.1.26 | ColumnwsNeighbourPortRxGoodOctets | read-only | current | The total number of bytes in all good packets received by a port (excluding framing bits but including FCS). |
| 1.3.6.1.4.1.9303.4.1.3.2.1.27 | ColumnwsNeighbourPortRxDropPkts | read-only | current | The number of good packets received by a port that were dropped due to lack of resources (e.g., lack of input buffers) or were dropped due to lack of resources… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.28 | ColumnwsNeighbourPortRxUnicastPkts | read-only | current | The number of good packets received by a port that are addressed to a unicast address. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.29 | ColumnwsNeighbourPortRxMulticastPkts | read-only | current | The number of good packets received by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadc… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.30 | ColumnwsNeighbourPortRxBroadcastPkts | read-only | current | The number of good packets received by a port that are directed to the broadcast address. This counter does not include errored broadcast packets or valid mult… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.31 | ColumnwsNeighbourPortRxFragments | read-only | current | The number of packets received by a port that are less than 64 bytes (excluding framing bits) and have either an FCS error or an alignment error. |
| 1.3.6.1.4.1.9303.4.1.3.2.1.32 | ColumnwsNeighbourPortRxExcessSizeDisc | read-only | current | The number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including the FCS) and were discarded due to excessi… |
| 1.3.6.1.4.1.9303.4.1.3.2.1.33 | ColumnwsNeighbourPortRxSymbolError | read-only | current | The total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carri… |
| 1.3.6.1.4.1.9303.4.1.3.3 | TablewsNeighbourPortSNPATable | not-accessible | current | Table of known SNPA on ports of discovered PFDB Neighbours. |
| 1.3.6.1.4.1.9303.4.1.3.3.1 | RowwsNeighbourPortSNPAEntry | not-accessible | current | An entry for a known SNPA on a port of a neighbour. |
| 1.3.6.1.4.1.9303.4.1.3.3.1.1 | ColumnwsNeighbourPortSNPAIfIndex | read-only | current | Neighbour interface index. |
| 1.3.6.1.4.1.9303.4.1.3.3.1.2 | ColumnwsNeighbourPortSNPANIndex | read-only | current | Neighbour index. |
| 1.3.6.1.4.1.9303.4.1.3.3.1.3 | ColumnwsNeighbourPortSNPAPIndex | read-only | current | Neighbour port index. |
| 1.3.6.1.4.1.9303.4.1.3.3.1.4 | ColumnwsNeighbourPortSNPASIndex | read-only | current | Neighbour port SNPA index. |
| 1.3.6.1.4.1.9303.4.1.3.3.1.5 | ColumnwsNeighbourPortSNPASMCast | read-only | current | Set to 1 if SNPA is a multicast address, 0 otherwise. |
| 1.3.6.1.4.1.9303.4.1.3.3.1.6 | ColumnwsNeighbourPortSNPA | read-only | current | Known SNPA on neighbour port. |
| 1.3.6.1.4.1.9303.4.1.4 | TablewsSFPTable | not-accessible | current | Table with information on SFPs. |
| 1.3.6.1.4.1.9303.4.1.4.1 | RowwsSFPEntry | not-accessible | current | An entry for an SFP. |
| 1.3.6.1.4.1.9303.4.1.4.1.1 | ColumnwsSFPIndex | read-only | current | SFP number. |
| 1.3.6.1.4.1.9303.4.1.4.1.2 | ColumnwsSFPStatus | read-only | current | SFP status. |
| 1.3.6.1.4.1.9303.4.1.4.1.3 | ColumnwsSFPConnector | read-only | current | Connector type. |
| 1.3.6.1.4.1.9303.4.1.4.1.4 | ColumnwsSFPTransceiver | read-only | current | Transceiver capablities. |
| 1.3.6.1.4.1.9303.4.1.4.1.5 | ColumnwsSFPEncoding | read-only | current | Encoding type. |
| 1.3.6.1.4.1.9303.4.1.4.1.6 | ColumnwsSFPBitrate | read-only | current | SFP Bitrate (Mbps). |
| 1.3.6.1.4.1.9303.4.1.4.1.7 | ColumnwsSFPSingleModeLen | read-only | current | Supported single mode fiber link length (m). A value of 255000 means > 254000 m. |
| 1.3.6.1.4.1.9303.4.1.4.1.8 | ColumnwsSFPMultiMode50Len | read-only | current | Supported 50um multi-mode fiber link length (m). A value of 2550 means > 2540 m. |
| 1.3.6.1.4.1.9303.4.1.4.1.9 | ColumnwsSFPMultiMode625Len | read-only | current | Supported 62.5um multi-mode fiber link length (m). A value of 2550 means > 2540 m. |
| 1.3.6.1.4.1.9303.4.1.4.1.10 | ColumnwsSFPCopperLen | read-only | current | Supported copper link length (m). A value of 255 means > 254 m. |
| 1.3.6.1.4.1.9303.4.1.4.1.11 | ColumnwsSFPTempStatus | read-only | current | Temperature status. |
| 1.3.6.1.4.1.9303.4.1.4.1.12 | ColumnwsSFPTemp | read-only | current | Measured temperature in degrees centigrade. |
| 1.3.6.1.4.1.9303.4.1.4.1.13 | ColumnwsSFPVoltStatus | read-only | current | Voltage status. |
| 1.3.6.1.4.1.9303.4.1.4.1.14 | ColumnwsSFPVolt | read-only | current | Measured voltage (mV). |
| 1.3.6.1.4.1.9303.4.1.4.1.15 | ColumnwsSFPTXCurrentStatus | read-only | current | TX Current status. |
| 1.3.6.1.4.1.9303.4.1.4.1.16 | ColumnwsSFPTXCurrent | read-only | current | Measured TX current (mA). |
| 1.3.6.1.4.1.9303.4.1.4.1.17 | ColumnwsSFPTXPowerStatus | read-only | current | TX power status. |
| 1.3.6.1.4.1.9303.4.1.4.1.18 | ColumnwsSFPTXPower | read-only | current | Measured TX power (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.19 | ColumnwsSFPRXPowerStatus | read-only | current | RX power status. |
| 1.3.6.1.4.1.9303.4.1.4.1.20 | ColumnwsSFPRXPower | read-only | current | Measured RX power (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.21 | ColumnwsSFPTransceiverExt | read-only | current | 10G Ethernet Compliance Codes. |
| 1.3.6.1.4.1.9303.4.1.4.1.22 | ColumnwsSFPTXdBmPower | read-only | current | Measured TX power (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.23 | ColumnwsSFPRXdBmPower | read-only | current | Measured RX power (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.24 | ColumnwsSFPTempNormalLow | read-only | current | Operating temparature normal range low (C). |
| 1.3.6.1.4.1.9303.4.1.4.1.25 | ColumnwsSFPTempNormalHigh | read-only | current | Operating temparature normal range high (C). |
| 1.3.6.1.4.1.9303.4.1.4.1.26 | ColumnwsSFPTempWarningLow | read-only | current | Operating temparature warning range low (C). |
| 1.3.6.1.4.1.9303.4.1.4.1.27 | ColumnwsSFPTempWarningHigh | read-only | current | Operating temparature warning range high (C). |
| 1.3.6.1.4.1.9303.4.1.4.1.28 | ColumnwsSFPVoltNormalLow | read-only | current | Supply voltage normal range low (mV). |
| 1.3.6.1.4.1.9303.4.1.4.1.29 | ColumnwsSFPVoltNormalHigh | read-only | current | Supply voltage normal range high (mV). |
| 1.3.6.1.4.1.9303.4.1.4.1.30 | ColumnwsSFPVoltWarningLow | read-only | current | Supply voltage warning range low (mV). |
| 1.3.6.1.4.1.9303.4.1.4.1.31 | ColumnwsSFPVoltWarningHigh | read-only | current | Supply voltage warning range high (mV). |
| 1.3.6.1.4.1.9303.4.1.4.1.32 | ColumnwsSFPTXCurrentNormalLow | read-only | current | TX Current normal range low (mA). |
| 1.3.6.1.4.1.9303.4.1.4.1.33 | ColumnwsSFPTXCurrentNormalHigh | read-only | current | TX Current normal range high (mA). |
| 1.3.6.1.4.1.9303.4.1.4.1.34 | ColumnwsSFPTXCurrentWarningLow | read-only | current | TX Current warning range low (mA). |
| 1.3.6.1.4.1.9303.4.1.4.1.35 | ColumnwsSFPTXCurrentWarningHigh | read-only | current | TX Current warning range high (mA). |
| 1.3.6.1.4.1.9303.4.1.4.1.36 | ColumnwsSFPTXOutputPowNormalLowuW | read-only | current | TX output power normal range low (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.37 | ColumnwsSFPTXOutputPowNormalHighuW | read-only | current | TX output power normal range high (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.38 | ColumnwsSFPTXOutputPowWarningLowuW | read-only | current | TX output power warning range low (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.39 | ColumnwsSFPTXOutputPowWarningHighuW | read-only | current | TX output power warning range high (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.40 | ColumnwsSFPTXOutputPowNormalLowdBm | read-only | current | TX output power normal range low (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.41 | ColumnwsSFPTXOutputPowNormalHighdBm | read-only | current | TX output power normal range high (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.42 | ColumnwsSFPTXOutputPowWarningLowdBm | read-only | current | TX output power warning range low (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.43 | ColumnwsSFPTXOutputPowWarningHighdBm | read-only | current | TX output power warning range high (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.44 | ColumnwsSFPRXInputPowNormalLowuW | read-only | current | RX input power normal range low (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.45 | ColumnwsSFPRXInputPowNormalHighuW | read-only | current | RX input power normal range high (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.46 | ColumnwsSFPRXInputPowWarningLowuW | read-only | current | RX input power warning range low (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.47 | ColumnwsSFPRXInputPowWarningHighuW | read-only | current | RX input power warning range high (uW). |
| 1.3.6.1.4.1.9303.4.1.4.1.48 | ColumnwsSFPRXInputPowNormalLowdBm | read-only | current | RX input power normal range low (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.49 | ColumnwsSFPRXInputPowNormalHighdBm | read-only | current | RX input power normal range high (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.50 | ColumnwsSFPRXInputPowWarningLowdBm | read-only | current | RX input power warning range low (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.51 | ColumnwsSFPRXInputPowWarningHighdBm | read-only | current | RX input power warning range high (dBm x 1000). |
| 1.3.6.1.4.1.9303.4.1.4.1.52 | ColumnwsSFPPartNumber | read-only | current | SFP part number. |
| 1.3.6.1.4.1.9303.4.1.4.1.53 | ColumnwsSFPSerialNumber | read-only | current | SFP serial number. |
| 1.3.6.1.4.1.9303.4.1.5 | IdentitywsAccounting | current | Accounting objects | |
| 1.3.6.1.4.1.9303.4.1.5.1 | TablewsPolicyTable | not-accessible | current | Table of policy accounting information. |
| 1.3.6.1.4.1.9303.4.1.5.1.1 | RowwsPolicyEntry | not-accessible | current | An entry for a policy. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.1 | ColumnwsPolicyIfIndex | read-only | current | Interface index of policy accounting entry. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.2 | ColumnwsPolicyIfName | read-only | current | Interface name of policy accountin entry |
| 1.3.6.1.4.1.9303.4.1.5.1.1.3 | ColumnwsPolicyName | read-only | current | Name of policy. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.4 | ColumnwsPolicyCookie | read-only | current | Name of policy cookie. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.5 | ColumnwsPolicyInPkts | read-only | current | Input packets counter. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.6 | ColumnwsPolicyInBytes | read-only | current | Input bytes counter. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.7 | ColumnwsPolicyInDrops | read-only | current | Number input packets dropped. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.8 | ColumnwsPolicyOutPkts | read-only | current | Output packets counter. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.9 | ColumnwsPolicyOutBytes | read-only | current | Output bytes counter. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.10 | ColumnwsPolicyOutDrops | read-only | current | Number input packets dropped. |
| 1.3.6.1.4.1.9303.4.1.5.1.1.11 | ColumnwsPolicyUsedCnt | read-only | current | Number policy maps set to use this policy. |
| 1.3.6.1.4.1.9303.4.1.6 | TablewsXFPTable | not-accessible | current | Table with information on XFPs. |
| 1.3.6.1.4.1.9303.4.1.6.1 | RowwsXFPEntry | not-accessible | current | An entry for an XFP. |
| 1.3.6.1.4.1.9303.4.1.6.1.1 | ColumnwsXFPIndex | read-only | current | XFP number. |
| 1.3.6.1.4.1.9303.4.1.6.1.2 | ColumnwsXFPStatus | read-only | current | XFP status. |
| 1.3.6.1.4.1.9303.4.1.6.1.3 | ColumnwsXFPConnector | read-only | current | Connector type. |
| 1.3.6.1.4.1.9303.4.1.6.1.4 | ColumnwsXFPTransceiver | read-only | current | Transceiver capablities. |
| 1.3.6.1.4.1.9303.4.1.6.1.5 | ColumnwsXFPEncoding | read-only | current | Encoding type. |
| 1.3.6.1.4.1.9303.4.1.6.1.6 | ColumnwsXFPBitrateMin | read-only | current | XFP Min Bitrate (Mbps). |
| 1.3.6.1.4.1.9303.4.1.6.1.7 | ColumnwsXFPBitrateMax | read-only | current | XFP Max Bitrate (Mbps). |
| 1.3.6.1.4.1.9303.4.1.6.1.8 | ColumnwsXFPSingleModeLen | read-only | current | Supported single mode fiber link length (m). A value of 255000 means > 254000 m. |
| 1.3.6.1.4.1.9303.4.1.6.1.9 | ColumnwsXFPMultiMode50Len | read-only | current | Supported 50um multi-mode fiber link length (m). A value of 510 means > 508 m. |
| 1.3.6.1.4.1.9303.4.1.6.1.10 | ColumnwsXFPMultiMode625Len | read-only | current | Supported 62.5um multi-mode fiber link length (m). A value of 255 means > 254 m. |
| 1.3.6.1.4.1.9303.4.1.6.1.11 | ColumnwsXFPCopperLen | read-only | current | Supported copper link length (m). A value of 255 means > 254 m. |
| 1.3.6.1.4.1.9303.4.1.6.1.12 | ColumnwsXFPTempStatus | read-only | current | Temperature status. |
| 1.3.6.1.4.1.9303.4.1.6.1.13 | ColumnwsXFPTemp | read-only | current | Measured temperature in degrees centigrade. |
| 1.3.6.1.4.1.9303.4.1.6.1.14 | ColumnwsXFPTXCurrentStatus | read-only | current | TX Current status. |
| 1.3.6.1.4.1.9303.4.1.6.1.15 | ColumnwsXFPTXCurrent | read-only | current | Measured TX current (mA). |
| 1.3.6.1.4.1.9303.4.1.6.1.16 | ColumnwsXFPTXPowerStatus | read-only | current | TX power status. |
| 1.3.6.1.4.1.9303.4.1.6.1.17 | ColumnwsXFPTXPower | read-only | current | Measured TX power (uW). |
| 1.3.6.1.4.1.9303.4.1.6.1.18 | ColumnwsXFPRXPowerStatus | read-only | current | RX power status. |
| 1.3.6.1.4.1.9303.4.1.6.1.19 | ColumnwsXFPRXPower | read-only | current | Measured RX power (uW). |