WELOTEC-WAN3G-MIB
63 objects
Welotec Wan3g MIB provides network management support for Welotec cellular 3G Wan products.
Imported Objects
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| WELOTEC-MIB | ihMgmt ihTraps |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.39360.2.6 | IdentityihWan3g | Welotec Wan3g MIB provides network management support for Welotec cellular 3G Wan products. | ||
| 1.3.6.1.4.1.39360.2.6.1 | NodeihWan3gMIBObjects | |||
| 1.3.6.1.4.1.39360.2.6.1.1 | Nodeih3gWanCommon | |||
| 1.3.6.1.4.1.39360.2.6.1.1.1 | Scalarih3gStandard | read-only | current | Cellular 3G Standard: GSM (Global System for Mobile communications) and CDMA (Code Division Multiple Access). |
| 1.3.6.1.4.1.39360.2.6.1.1.2 | Scalarih3gModemState | read-only | current | Cellular 3G modem state, up(2) indicates modem can be detected and down(3) indicates modem can not be detected. |
| 1.3.6.1.4.1.39360.2.6.1.1.3 | Scalarih3gCurrentServiceType | read-only | current | This object indicates the current service type. |
| 1.3.6.1.4.1.39360.2.6.1.1.4 | Scalarih3gCurrentConnectionTime | read-only | current | Cellular 3G current connection time. |
| 1.3.6.1.4.1.39360.2.6.1.1.5 | Scalarih3gConnectionStatus | read-only | current | Indicates the current connection status. |
| 1.3.6.1.4.1.39360.2.6.1.1.6 | Scalarih3gModemRegistrationStatus | read-only | current | Indicates the registration status of the modem. |
| 1.3.6.1.4.1.39360.2.6.1.1.7 | Scalarih3gModemTemperature | read-only | current | The modem temperature. |
| 1.3.6.1.4.1.39360.2.6.1.1.8 | Scalarih3gModemReset | read-write | current | This object is used to reset or power-cycle the modem. |
| 1.3.6.1.4.1.39360.2.6.1.1.9 | Scalarih3gSignalLevel | read-only | current | The cellular signal LED. |
| 1.3.6.1.4.1.39360.2.6.1.1.10 | Scalarih3gTotalByteTransmitted | read-only | current | Total number of bytes transmitted for all calls. It is the total number of bytes transmitted by modem, not to be confused with the number of bytes transmitted … |
| 1.3.6.1.4.1.39360.2.6.1.1.11 | Scalarih3gTotalByteReceived | read-only | current | Total number of bytes received for all calls. It is the total number of bytes received by modem, not to be confused with the number of bytes received from the … |
| 1.3.6.1.4.1.39360.2.6.1.2 | Nodeih3gWanCdma | |||
| 1.3.6.1.4.1.39360.2.6.1.2.1 | Nodeih3gCdmaIdentity | |||
| 1.3.6.1.4.1.39360.2.6.1.2.1.1 | Scalarih3gCdmaEsn | read-only | current | This object indicates Electronic Serial Number (ESN). |
| 1.3.6.1.4.1.39360.2.6.1.2.1.2 | Scalarih3gCdmaImsi | read-only | current | International Mobile Subscriber Identifier (IMSI). |
| 1.3.6.1.4.1.39360.2.6.1.2.1.3 | Scalarih3gCdmaMdn | read-write | current | Mobile Directory Number (MDN), a dialable number assigned to a wireless phone. |
| 1.3.6.1.4.1.39360.2.6.1.2.1.4 | Scalarih3gCdmaMsid | read-write | current | Mobile Station Identifier (MSID), MSID is utilized to distinguish the mobile station being programmed from other mobile stations during messaging and paging pr… |
| 1.3.6.1.4.1.39360.2.6.1.2.1.5 | Scalarih3gCdmaMsl | read-write | current | Mobile Subscriber Lock (MSL). |
| 1.3.6.1.4.1.39360.2.6.1.2.2 | Nodeih3gCdmaNetwork | |||
| 1.3.6.1.4.1.39360.2.6.1.2.2.1 | Scalarih3gCdmaCurrentSid | read-write | current | Current System Identifier (SID), SID is a 15-bit numeric identifiers used by cellular systems to identify the home system of a cellular telephone and by the ce… |
| 1.3.6.1.4.1.39360.2.6.1.2.2.2 | Scalarih3gCdmaCurrentNid | read-write | current | Current Network Identification (NID), NID is a 16-bit numeric identifiers used by cellular systems. |
| 1.3.6.1.4.1.39360.2.6.1.2.3 | Nodeih3gCdmaProfile | |||
| 1.3.6.1.4.1.39360.2.6.1.2.3.1 | Scalarih3gCdmaProfileUsername | read-write | current | This object is NAI(Network Access Identifier). |
| 1.3.6.1.4.1.39360.2.6.1.2.3.2 | Scalarih3gCdmaProfilePassword | read-write | current | This object indicates the password to be used for PPP authentication. |
| 1.3.6.1.4.1.39360.2.6.1.2.3.3 | Scalarih3gCdmaProfileCallNumber | read-only | current | Phone number of outgoing call. |
| 1.3.6.1.4.1.39360.2.6.1.2.3.4 | Scalarih3gCdmaProfileConnectionControl | read-write | current | Set the connect/disconnect condition. |
| 1.3.6.1.4.1.39360.2.6.1.2.3.5 | Scalarih3gCdmaProfileConnectionInterval | read-write | current | Set the connection interval when connect condition is 'periodically connect'. |
| 1.3.6.1.4.1.39360.2.6.1.2.3.6 | Scalarih3gCdmaProfilePingRemoteHost | read-write | current | Set the remote hostname. |
| 1.3.6.1.4.1.39360.2.6.1.2.4 | Nodeih3gCdmaRadio | |||
| 1.3.6.1.4.1.39360.2.6.1.2.4.1 | Scalarih3gCdmaSignalRssi | read-only | current | Cellular signal strength. |
| 1.3.6.1.4.1.39360.2.6.1.2.4.2 | Scalarih3gCdmaBand | read-only | current | GPRS/UMTS band to which the modem is attached. |
| 1.3.6.1.4.1.39360.2.6.1.2.4.3 | Scalarih3gCdmaChannelNumber | read-only | current | Channel number to which the modem is attached. |
| 1.3.6.1.4.1.39360.2.6.1.3 | Nodeih3gWanGsm | |||
| 1.3.6.1.4.1.39360.2.6.1.3.1 | Nodeih3gGsmIdentity | |||
| 1.3.6.1.4.1.39360.2.6.1.3.1.1 | Scalarih3gGsmImsi | read-only | current | International Mobile Subscriber Identifier (IMSI), a unique 15-digit code used to identify an individual user on a GSM network. |
| 1.3.6.1.4.1.39360.2.6.1.3.1.2 | Scalarih3gGsmImei | read-only | current | International Mobile Equipment Identifier (IMEI), a unique 15 or 17 digit code used to identify an individual mobile station to a GSM or UMTS network. |
| 1.3.6.1.4.1.39360.2.6.1.3.2 | Nodeih3gGsmNetwork | |||
| 1.3.6.1.4.1.39360.2.6.1.3.2.1 | Scalarih3gGsmLac | read-only | current | Location Area Code (LAC). |
| 1.3.6.1.4.1.39360.2.6.1.3.2.2 | Scalarih3gGsmNetworkSelectionMode | read-write | current | Network selection mode. Can be manual selection mode or automatic selection mode. Set to automatic by default. |
| 1.3.6.1.4.1.39360.2.6.1.3.2.3 | Scalarih3gGsmMcc | read-write | current | Mobile Country Code (MCC). Value of '-1' indicates MCC is 'Not Applicable'. |
| 1.3.6.1.4.1.39360.2.6.1.3.2.4 | Scalarih3gGsmMnc | read-write | current | Mobile Network Code (MNC). Value of '-1' indicates MNC is 'Not Applicable'. |
| 1.3.6.1.4.1.39360.2.6.1.3.2.5 | Scalarih3gGsmCurrentCellId | read-only | current | Cell Identifier of current cell. Cell ID is given by the base station. |
| 1.3.6.1.4.1.39360.2.6.1.3.2.6 | Scalarih3gGsmServiceProvider | read-only | current | Service provider. |
| 1.3.6.1.4.1.39360.2.6.1.3.3 | Nodeih3gGsmProfile | |||
| 1.3.6.1.4.1.39360.2.6.1.3.3.1 | Scalarih3gGsmProfileAddr | read-write | current | Configured PDP address. PDP type is defined in c3gGsmPdpProfileType. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.2 | Scalarih3gGsmProfileAPN | read-write | current | This object indicates profile Access Point Name (APN). This information is provided by the service provider. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.3 | Scalarih3gGsmProfileAuthenType | read-write | current | This object indicates PPP authentication type supported. CHAP and PAP are supported. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.4 | Scalarih3gGsmProfileUsername | read-write | current | This object indicates the username to be used for PPP authentication. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.5 | Scalarih3gGsmProfilePassword | read-write | current | This object indicates the password to be used for PPP authentication. This information is provided by the service provider. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.6 | Scalarih3gGsmProfileCallNumber | read-write | current | Phone number of call. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.7 | Scalarih3gGsmProfileConnectionControl | read-write | current | Set the connect/disconnect condition. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.8 | Scalarih3gGsmProfileConnectionInterval | read-write | current | Set the connection interval when connect condition is 'periodically connect'. |
| 1.3.6.1.4.1.39360.2.6.1.3.3.9 | Scalarih3gGsmProfilePingRemoteHost | read-write | current | Set the remote hostname. |
| 1.3.6.1.4.1.39360.2.6.1.3.4 | Nodeih3gGsmRadio | |||
| 1.3.6.1.4.1.39360.2.6.1.3.4.1 | Scalarih3gGsmSignalRssi | read-only | current | Cellular signal strength. |
| 1.3.6.1.4.1.39360.2.6.1.3.4.2 | Scalarih3gGsmBand | read-only | current | GPRS/UMTS band to which the modem is attached. |
| 1.3.6.1.4.1.39360.2.6.1.3.4.3 | Scalarih3gGsmChannelNumber | read-only | current | Channel number to which the modem is attached. |
| 1.3.6.1.4.1.39360.2.6.1.3.4.4 | Scalarih3gGsmSignalRsrp | read-only | current | Reference Signal Received Power (RSRP). |
| 1.3.6.1.4.1.39360.2.6.1.3.4.5 | Scalarih3gGsmSignalRsrq | read-only | current | Reference Signal Received Quality (RSRQ). |
| 1.3.6.1.4.1.39360.2.6.1.3.4.6 | Scalarih3gGsmSignalSinr | read-only | current | Signal To Interference Plus Noise Ratio (SINR). |