WESTERMO-LYNX-MIB
68 objects
This MIB module controls the private part for the Westermo Lynx switch.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| WESTERMO-OID-MIB | products |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16177.1.2 | Identitylynx | This MIB module controls the private part for the Westermo Lynx switch. | ||
| 1.3.6.1.4.1.16177.1.2.1 | Nodegeneral | |||
| 1.3.6.1.4.1.16177.1.2.1.1 | Scalartemperature | read-only | current | Read the temperature on the R200/T200. |
| 1.3.6.1.4.1.16177.1.2.1.2 | ScalarswVersion | read-only | current | Read the software version of the managed cpu software on the R200/T200. |
| 1.3.6.1.4.1.16177.1.2.1.3 | ScalarswVersionBootLoader | read-only | current | Read the software version of the baseboard cpu on the R200/T200. |
| 1.3.6.1.4.1.16177.1.2.1.4 | ScalarhwVersionBoard | read-only | current | Read the hardware version of the managed cpu board on the R200/T200. |
| 1.3.6.1.4.1.16177.1.2.1.5 | ScalarhwVersionPld | read-only | current | Read the hardware version of the baseboard cpu software on the R200/T200. |
| 1.3.6.1.4.1.16177.1.2.1.6 | ScalarserialNumber | read-only | current | The serial number for the switch. |
| 1.3.6.1.4.1.16177.1.2.1.7 | ScalarbatchID | read-only | current | The batch ID number for the switch. |
| 1.3.6.1.4.1.16177.1.2.1.8 | ScalarhwConfig | read-only | current | Shows the Flash memory type. |
| 1.3.6.1.4.1.16177.1.2.1.9 | Scalarreset | read-write | current | Reset the lynx. |
| 1.3.6.1.4.1.16177.1.2.1.10 | ScalarpowerSupply | read-only | current | Read the power supply status. The system has redundant power supply possibillites. This mib reads out the status. |
| 1.3.6.1.4.1.16177.1.2.1.11 | ScalartrapHostAddr1 | read-write | current | The address to the trap host PC in the network. |
| 1.3.6.1.4.1.16177.1.2.1.12 | ScalartrapHostAddr2 | read-write | current | The address to the trap host PC in the network. |
| 1.3.6.1.4.1.16177.1.2.1.13 | ScalarreadPassword | read-write | current | The read-only community string |
| 1.3.6.1.4.1.16177.1.2.1.14 | ScalarwritePassword | read-write | current | The read/write community string |
| 1.3.6.1.4.1.16177.1.2.1.15 | GroupportGroup | current | Network port properties. | |
| 1.3.6.1.4.1.16177.1.2.1.16 | GroupmiscGroup | current | General properties. | |
| 1.3.6.1.4.1.16177.1.2.1.17 | GrouptrapGroup | current | Traps. | |
| 1.3.6.1.4.1.16177.1.2.1.18 | GroupigmpGroup | current | IGMP snooping properties. | |
| 1.3.6.1.4.1.16177.1.2.2 | Nodeconfig | |||
| 1.3.6.1.4.1.16177.1.2.2.1 | ScalarontPortNumber | read-only | current | The number of network ports. |
| 1.3.6.1.4.1.16177.1.2.2.2 | TableontTable | not-accessible | current | A list of configuration entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.16177.1.2.2.2.1 | RowontEntry | not-accessible | current | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.1 | ColumnportIndex | read-only | current | A unique value, greater than zero, for each port. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.2 | ColumnportEnable | read-write | current | Enables/disables port |
| 1.3.6.1.4.1.16177.1.2.2.2.1.3 | ColumnportDuplexMode | read-write | current | Duplex mode for port |
| 1.3.6.1.4.1.16177.1.2.2.2.1.4 | ColumnportAutoNegotiate | read-write | current | Enable/Disable autonegotiation for port |
| 1.3.6.1.4.1.16177.1.2.2.2.1.5 | ColumnportSpeed | read-write | current | Speed for port |
| 1.3.6.1.4.1.16177.1.2.2.2.1.6 | ColumnportAlarm | read-write | current | Add this port to be included in the STAT group. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.7 | ColumnportType | read-only | current | Shows the port type fibre or copper. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.8 | ColumntimeSyncFilters | read-write | current | This values handles the timesync filters for the port. The filters can be black, blue and red. Not working in release 2.06. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.9 | ColumnrstpPortTrunk | read-write | current | This value is used to define the RSTP trunk ports. Not working in release 2.06. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.10 | ColumnigmpPortTrunk | read-write | current | This value is used to define the IGMP trunk ports. Not working in release 2.06. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.12 | ColumnremovePortTag | read-write | current | This value is used to define which port that will remove the vlan tag before the packets is send out. Not working in release 2.06. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.13 | ColumnvlanId | read-write | current | This value is used define the vlan id number for each vlan id. Each row represents a color: 1: white 2: red 3: blue 4: green 5: yellow 6: brown 7: pink |
| 1.3.6.1.4.1.16177.1.2.2.2.1.14 | ColumnvlanPrio | read-write | current | This value is used define the vlan priority number for each vlan id. The first vlan is the same as white vlan, vlan 2 = red vlan, vlan 3 = blue vlan, vlan 4 = … |
| 1.3.6.1.4.1.16177.1.2.2.2.1.15 | ColumnportVlanColors | read-write | current | This value is used to give extra vlan values for this port. The values can be white, red, blue, green, brown, yellow or pink, separated by whitespace. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.16 | ColumnvlanDefaultColor | read-write | current | Default VLAN color for this port. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.17 | ColumnigmpColor | read-write | current | IGMP port color. |
| 1.3.6.1.4.1.16177.1.2.2.2.1.18 | ColumnrstpPortStatus | read-write | current | RSTP port status |
| 1.3.6.1.4.1.16177.1.2.2.2.1.19 | ColumnlinkStatus | read-write | current | port link status |
| 1.3.6.1.4.1.16177.1.2.2.3 | Scalarsnmp | read-write | current | Enable/disable the SNMP function. |
| 1.3.6.1.4.1.16177.1.2.2.4 | Scalarfrnt | read-write | current | Enable/disable the FRNTv0 function. |
| 1.3.6.1.4.1.16177.1.2.2.5 | ScalarfrntPorts | read-write | current | Configure the FRNTv0 ports. Not working in release 2.06. |
| 1.3.6.1.4.1.16177.1.2.2.6 | Scalardhcp | read-write | current | Enable/disable the DHCP function. |
| 1.3.6.1.4.1.16177.1.2.2.7 | ScalarenableVlan | read-write | current | Set the VLAN functions on the switch. Not working in release 2.06. |
| 1.3.6.1.4.1.16177.1.2.2.8 | ScalaripAddress | read-write | current | The IPv4 Address of the switch. This value is changed after reset. |
| 1.3.6.1.4.1.16177.1.2.2.9 | ScalaripNetMask | read-write | current | The IPv4 Subnet mask of the switch. This value is changed after reset. |
| 1.3.6.1.4.1.16177.1.2.2.10 | ScalardefaultGateway | read-write | current | Address of the switch default gateway. This value is changed after reset. |
| 1.3.6.1.4.1.16177.1.2.2.11 | ScalardhcpRelayAgent | read-write | current | Enable/disable the DHCP Relay Agent function. |
| 1.3.6.1.4.1.16177.1.2.2.12 | ScalardhcpRelayAgentServer1 | read-write | current | The DHCP Relay Agents Primary DHCP Server |
| 1.3.6.1.4.1.16177.1.2.2.13 | ScalardhcpRelayAgentServer2 | read-write | current | The DHCP Relay Agents Secondary DHCP Server |
| 1.3.6.1.4.1.16177.1.2.2.14 | Scalarrstp | read-write | current | Enable/disable RSTP / STP. |
| 1.3.6.1.4.1.16177.1.2.5 | Nodeigmp | |||
| 1.3.6.1.4.1.16177.1.2.5.1 | Scalarsnooping | read-write | current | Enable/disable IGMP snooping. |
| 1.3.6.1.4.1.16177.1.2.5.2 | Scalarautomode | read-write | current | IGMP Snooping Automode |
| 1.3.6.1.4.1.16177.1.2.5.3 | Scalarquerier | read-write | current | IGMP Querier |
| 1.3.6.1.4.1.16177.1.2.5.4 | Scalarstopfilter | read-write | current | Multicast stop filter. |
| 1.3.6.1.4.1.16177.1.2.5.6 | Scalarquerytimeout | read-write | current | IGMP Query timeout. |
| 1.3.6.1.4.1.16177.1.2.6 | Nodestat | |||
| 1.3.6.1.4.1.16177.1.2.6.1 | ScalarstatusCode | read-only | current | Read out a summary from the status code from the status registers. Any error in port alarms masked against port link status, DC relays or frnt will return 2. |
| 1.3.6.1.4.1.16177.1.2.6.2 | ScalarenableStatusTrap | read-write | current | Enable or disable status relay trap message. |
| 1.3.6.1.4.1.16177.1.2.7 | NodeprivTraps | |||
| 1.3.6.1.4.1.16177.1.2.7.1 | NotificationstatWarning | current | Status warning. | |
| 1.3.6.1.4.1.16177.1.2.7.2 | NotificationstatNoWarning | current | Status warning. | |
| 1.3.6.1.4.1.16177.1.2.7.3 | NotificationlinkUpChangeWarning | current | Link up notification. | |
| 1.3.6.1.4.1.16177.1.2.7.4 | NotificationlinkDownChangeWarning | current | Link down notification. |