WESTERMO-WEOS-MIB
260 objects
This MIB module controls the SNMP functionality in the WeOS branch of the Westermo private MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16177.2.1 | Identityweos | This MIB module controls the SNMP functionality in the WeOS branch of the Westermo private MIB. | ||
| 1.3.6.1.4.1.16177.2.1.1 | Nodecommand | |||
| 1.3.6.1.4.1.16177.2.1.1.1 | Scalarreboot | read-write | current | Writing value '1' will reboot the unit. (The unit will boot up using the startup configuration) Reading the reboot object will return '0' (zero) |
| 1.3.6.1.4.1.16177.2.1.1.2 | ScalarfactoryReset | read-write | current | Writing value '1' will reset unit configuration to factory default values and reboot. Reading the factoryReset object will return '0' (zero) |
| 1.3.6.1.4.1.16177.2.1.2 | Nodephy | |||
| 1.3.6.1.4.1.16177.2.1.2.1 | TablelffTable | not-accessible | current | Table containing Westermo Link Fail Forward (LFF) settings and status applicable ports. Westermo LFF is used to indicate the state (up/down) of a remote link. … |
| 1.3.6.1.4.1.16177.2.1.2.1.1 | RowlffEntry | not-accessible | current | For each local (SHDSL) port, there is a row in the lffTable containing LFF status and settings. |
| 1.3.6.1.4.1.16177.2.1.2.1.1.1 | ColumnlffPortIfIndex | read-only | current | This index should map to the local (SHDSL) port's ifIndex in the ifTable. |
| 1.3.6.1.4.1.16177.2.1.2.1.1.2 | ColumnlffPortIfName | read-only | current | This name should map to the local (SHDSL) port's ifName in the ifXTable. |
| 1.3.6.1.4.1.16177.2.1.2.1.1.3 | ColumnlffStatus | read-only | current | The lffStatus shows the status of a (Ethernet) link at the remote end of a SHDSL link: - 1 (disabled): LFF is configured 'disabled' on local (SHDSL) port. - 2 … |
| 1.3.6.1.4.1.16177.2.1.2.2 | Nodesfp | |||
| 1.3.6.1.4.1.16177.2.1.2.2.1 | TablesfpDdmPortTable | not-accessible | current | Table containing DDM diagnostics per DDM capable SFP. |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1 | RowsfpDdmPortEntry | not-accessible | current | This row in the sfpDdmPortTable containing per port SFP DDM diagnostics. |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1.1 | ColumnsfpDdmPortIfIndex | accessible-for-notify | current | This index maps to the port's ifIndex in the ifTable. |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1.2 | ColumnsfpDdmPortIfName | read-only | current | The system name of the port. |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1.3 | ColumnsfpDdmPortVoltage | read-only | current | The supply voltage of the SFP. The accuracy is better than +/-3 % and the total range of 0 - 6550 mV. The voltage is represented in mV. |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1.4 | ColumnsfpDdmPortTemperature | read-only | current | Temperature of the SFP. The temperature accuracy is better than 3 degrees Celsius and the total range of -128 degrees C to +128 degrees C. |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1.5 | ColumnsfpDdmPortBiasCurrent | read-only | current | The transmitt bias current. The accuracy is better than +/- 10 % and the total range of 0 - 131 mA. The current is represented in uA. |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1.6 | ColumnsfpDdmPortTxPower | read-only | current | Transmitt power of the laser. The accuracy is better than +/-3dB and the total range of -40 to +8.2 dBm ~(0 - 6.5535 mW). The power is represented in steps of … |
| 1.3.6.1.4.1.16177.2.1.2.2.1.1.7 | ColumnsfpDdmPortRxPower | read-only | current | Receiving power of the laser. The accuracy is better than +/-3dB and the total range of -40 to +8.2 dBm ~(0 - 6.5535 mW). The power is represented in steps of … |
| 1.3.6.1.4.1.16177.2.1.2.3 | NodephyStats | |||
| 1.3.6.1.4.1.16177.2.1.2.3.1 | ScalarsummaryFCSErrors | read-only | current | The summaryFCSErrors display the total of FCS errors for all ports on the unit |
| 1.3.6.1.4.1.16177.2.1.2.3.2 | TablebwStatsTable | not-accessible | current | Table containing port bandwidth rates. |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1 | RowbwStatsEntry | not-accessible | current | For each local port, there is a row in the bwStatsTable containing port bandwidth rates. |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.1 | ColumnbwStatsIndex | read-only | current | The value of this object uniquely identifies this bwStats entry. |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.2 | ColumnbwStatsEnabled | read-only | current | Bandwidth statistics enabled or disabled for this port. |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.3 | ColumnbwStatsBitrateIn10s | read-only | current | The current average input traffic for the last 10 seconds. This value is calculated via periodic sampling of the port counters And will be updated at least eve… |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.4 | ColumnbwStatsBitrateOut10s | read-only | current | The current average output traffic for the last 10 seconds. This value is calculated via periodic sampling of the port counters And will be updated at least ev… |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.5 | ColumnbwStatsBitrateIn1m | read-only | current | The current moving average input traffic for the last minute. This value is calculated and updated at least every 10 seconds. The unit is bits per second and t… |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.6 | ColumnbwStatsBitrateOut1m | read-only | current | The current moving average output traffic for the last minute. This value is calculated and updated at least every 10 seconds. The unit is bits per second and … |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.7 | ColumnbwStatsBitrateIn10m | read-only | current | The current moving average input traffic for the last 10 minutes. This value is calculated and updated at least every 10 seconds. The unit is bits per second a… |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.8 | ColumnbwStatsBitrateOut10m | read-only | current | The current moving average output traffic for the last 10 minutes. This value is calculated and updated at least every 10 seconds. The unit is bits per second … |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.9 | ColumnbwStatsBitrateIn1h | read-only | current | The current moving average input traffic for the last hour. This value is calculated and updated at least every 10 seconds. The unit is bits per second and thi… |
| 1.3.6.1.4.1.16177.2.1.2.3.2.1.10 | ColumnbwStatsBitrateOut1h | read-only | current | The current moving average output traffic for the last hour. This value is calculated and updated at least every 10 seconds. The unit is bits per second and th… |
| 1.3.6.1.4.1.16177.2.1.3 | Nodelink | |||
| 1.3.6.1.4.1.16177.2.1.3.1 | Nodevlan | |||
| 1.3.6.1.4.1.16177.2.1.3.2 | Nodel2Qos | |||
| 1.3.6.1.4.1.16177.2.1.3.2.1 | Tablel2QosVlanTable | not-accessible | current | Table containing VLAN priority settings for existing VLANs. |
| 1.3.6.1.4.1.16177.2.1.3.2.1.1 | Rowl2QosVlanEntry | not-accessible | current | The row in the l2QosVlanTable containing per VLAN priority settings. |
| 1.3.6.1.4.1.16177.2.1.3.2.1.1.1 | Columnl2QosVlanId | read-only | current | This index should be mapped to the VLAN ID of Q-bridge MIB. |
| 1.3.6.1.4.1.16177.2.1.3.2.1.1.2 | ColumnvlanPriorityEnabled | read-write | current | Enable (true) or disable (false) VLAN priority for this VLAN. |
| 1.3.6.1.4.1.16177.2.1.3.2.1.1.3 | ColumnvlanPriorityLevel | read-write | current | The VLAN priority level for this VLAN. 0 is lowest and 7 is highest priority. |
| 1.3.6.1.4.1.16177.2.1.3.2.2 | Tablel2QosPortTable | not-accessible | current | Table containing per port piority settings for LAN ports |
| 1.3.6.1.4.1.16177.2.1.3.2.2.1 | Rowl2QosPortEntry | not-accessible | current | The row in the l2QosPortTable containing per port priority settings. |
| 1.3.6.1.4.1.16177.2.1.3.2.2.1.1 | Columnl2QosPortIfIndex | read-only | current | This index should map to the port's ifIndex in the ifTable. |
| 1.3.6.1.4.1.16177.2.1.3.2.2.1.2 | Columnl2QosPortIfName | read-only | current | This name should map to the port's ifName in the ifXTable. |
| 1.3.6.1.4.1.16177.2.1.3.2.2.1.3 | Columnl2QosPortPriorityMode | read-write | current | The priority mode (tag, ip or port) to be used on this specific port. 1. (tag): Use the incoming packet's VLAN tag priority value to determine its priority. (U… |
| 1.3.6.1.4.1.16177.2.1.3.2.2.1.4 | Columnl2QosPortPriorityLevel | read-write | current | The port priority level for this port. 0 is lowest and 7 is highest priority. |
| 1.3.6.1.4.1.16177.2.1.3.3 | Nodefrnt | |||
| 1.3.6.1.4.1.16177.2.1.3.3.1 | Nodefrntv0 | |||
| 1.3.6.1.4.1.16177.2.1.3.3.1.1 | Tablefrntv0Table | not-accessible | current | Table containing a list of FRNTv0 instances/rings. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1 | Rowfrntv0Entry | not-accessible | current | The row in the frntv0Table containing settings and status information for a specific FRNTv0 instance/ring. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.1 | Columnfrntv0InstanceId | accessible-for-notify | current | The instance id of this FRNTv0 Ring (only of local significance to this unit). |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.2 | Columnfrntv0FocalPointEnabled | read-create | current | True(1) if this unit is configured as focal point for this FRNTv0 instance. False(2) if this unit is configured as member switch for this FRNTv0 instance. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.3 | Columnfrntv0Port1 | read-create | current | Name of FRNT port M in the FRNT port pair. In case the unit is configured as focal point and the ring is fully connected, it is port M that is put in BLOCKING. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.4 | Columnfrntv0Port2 | read-create | current | Name of FRNT port N in the FRNT port pair. In case of an edge in a FRNT bus rather than a node in a FRNT ring then port N shall be set to 'None' and it will be… |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.5 | Columnfrntv0Port1State | read-only | current | Provides information about the status of FRNT port M. See frntv0RingStatus for more details. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.6 | Columnfrntv0Port2State | read-only | current | Provides information about the status of FRNT port N. See frntv0RingStatus for more details. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.7 | Columnfrntv0RingStatus | read-only | current | Read ring status information. The answer is to be interpreted differently when asking a focal point or a member switch. Focal point (status of the whole FRNT t… |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.8 | Columnfrntv0RowStatus | read-create | current | This object indicates the status of this table entry. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.9 | Columnfrntv0TopologyChangeCount | read-only | current | This object indicates the number of transitions between bus/ring mode since FRNT was enabled. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.10 | Columnfrntv0TopologyTimeSinceLastChange | read-only | current | This object indicates the time that have passed since the last change of ring status. |
| 1.3.6.1.4.1.16177.2.1.3.3.1.1.1.11 | Columnfrntv0PortsSwapped | read-only | current | FRNT can detect if the FRNT ports have been swapped. For example if port1 is connected to port1 on another FRNT unit. True(1) if the ports are swapped. False(2… |
| 1.3.6.1.4.1.16177.2.1.3.4 | NodeigmpSnooping | |||
| 1.3.6.1.4.1.16177.2.1.3.4.1 | ScalarigmpSnoopingQuerierMode | read-write | current | The querierMode object controls the querier mode an IGMP snooping switch will operate in on IGMP Snooping enabled VLANs. If the switch does not have an IP addr… |
| 1.3.6.1.4.1.16177.2.1.3.4.2 | ScalarigmpSnoopingQuerierInterval | read-write | current | The IGMP Querier Interval (seconds). This interval will be used on all interfaces where this unit acts as IGMP Querier, unless multicast routing protocol speci… |
| 1.3.6.1.4.1.16177.2.1.3.4.3 | ScalarstaticMulticastRouterPorts | read-write | current | This is a comma-separated list of (LAN)port names, which specifies statically configured 'multicast router ports'. All layer-2 multicast traffic (known and unk… |
| 1.3.6.1.4.1.16177.2.1.3.4.4 | ScalarcurrentMulticastRouterPorts | read-only | current | This is a comma-separated list of portnames, which lists all ports operating as multicast router ports - both dynamically discovered (e.g., by reception of IGM… |
| 1.3.6.1.4.1.16177.2.1.3.4.5 | TableigmpSnoopingVlanTable | not-accessible | current | A list of configuration entries for VLAN specific IGMP Snooping objects. |
| 1.3.6.1.4.1.16177.2.1.3.4.5.1 | RowigmpSnoopingVlanEntry | not-accessible | current | An IGMP Snooping VLAN entry contains IGMP Snooping objects relevant for IGMP Snooping management per VLAN. |
| 1.3.6.1.4.1.16177.2.1.3.4.5.1.1 | ColumnigmpSnoopingVlanId | read-only | current | This index should match corresponding VLAN ID of Q-bridge MIB. |
| 1.3.6.1.4.1.16177.2.1.3.4.5.1.2 | ColumnigmpSnoopingEnabled | read-write | current | IGMP Snooping enabled or disabled on this particular VLAN. |
| 1.3.6.1.4.1.16177.2.1.3.5 | Noderico | |||
| 1.3.6.1.4.1.16177.2.1.3.5.1 | TableriCoStatusTable | not-accessible | current | Table containing status for a list of RiCo and/or Dual Homing instances present on this unit. |
| 1.3.6.1.4.1.16177.2.1.3.5.1.1 | RowriCoStatusEntry | not-accessible | current | Row in the riCoStatusTable that is containing settings and status information for a specific RiCo/Dual-Homing instance. |
| 1.3.6.1.4.1.16177.2.1.3.5.1.1.1 | ColumnriCoStatusRingIdx | accessible-for-notify | current | The ring instance ID of this RiCo/Dual-Homing instance (only of local significance to this unit). - For RiCo instances, the ring ID corresponds to the associat… |
| 1.3.6.1.4.1.16177.2.1.3.5.1.1.2 | ColumnriCoStatusCouplingIdx | accessible-for-notify | current | The ID of this RiCo/Dual-Homing instance. (only of local significance to this unit). Unique per ring instance (riCoStatusRingIdx). |
| 1.3.6.1.4.1.16177.2.1.3.5.1.1.3 | ColumnriCoStatusNodeId | accessible-for-notify | current | The unique ID of this RiCo node. A MAC address (typically the base MAC address) of this unit. |
| 1.3.6.1.4.1.16177.2.1.3.5.1.1.4 | ColumnriCoStatusHelloInterval | read-only | current | Configured RiCo Ring Hello interval in milliseconds. Not applicable for Dual Homing instances (value '0') |
| 1.3.6.1.4.1.16177.2.1.3.5.1.1.5 | ColumnriCoStatusHelloEffective | read-only | current | Effective RiCo Ring Hello interval in milliseconds. Shows negotiated Hello interval. Not applicable for Dual Homing instances (value '0'). |
| 1.3.6.1.4.1.16177.2.1.3.5.2 | TableriCoStatusUplinkTable | not-accessible | current | Table containing status of RiCo and Dual-Homing uplinks per link |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1 | RowriCoStatusUplinkEntry | not-accessible | current | The row in the riCoStatusUplinkTable containing status information for a specific RiCo or Dual-Homing uplink. For RiCo, status for all local uplinks, and for t… |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.1 | ColumnriCoStatusUplinkRingIdx | accessible-for-notify | current | The ring instance ID of this RiCo/Dual-Homing instance (only of local significance to this unit). - For RiCo instances, the ring ID corresponds to the associat… |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.2 | ColumnriCoStatusUplinkCouplingIdx | accessible-for-notify | current | The instance id of this riCo Uplink |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.3 | ColumnriCoStatusUplinkNodeId | accessible-for-notify | current | The unique ID of the node, i.e., the MAC address of the node. For RiCo, this can be the (base) MAC of the local unit, or the MAC identifying a peer RiCo node. … |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.4 | ColumnriCoStatusUplinkIfIndex | read-only | current | The interface index of the uplink port. - For local uplinks, this index corresponds to the port's index in the ifTable (IF-MIB). - For non-local uplinks, the v… |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.5 | ColumnriCoStatusUplinkStatus | read-only | current | Uplink active (1), backup (2) or down (3). |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.6 | ColumnriCoStatusUplinkIfName | read-only | current | The name of the interface used for this uplink. |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.7 | ColumnriCoStatusUplinkPrio | read-only | current | Effective priority of this uplink. Based on configured priority and 'adjust' value (sticky uplink). |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.8 | ColumnriCoStatusUplinkPathCost | read-only | current | Current path cost for this uplink. |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.9 | ColumnriCoStatusUplinkHelloInterval | read-only | current | Configured Ring Hello Interval for the RiCo node of this uplink. Not valid for Dual-Homing, value '0') |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.10 | ColumnriCoStatusUplinkHelloIntervalEffective | read-only | current | Effective Ring Hello Interval for the RiCo node of this uplink. Not valid for Dual-Homing, value '0') |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.11 | ColumnriCoStatusUplinkChangedCounter | read-only | current | Number of times this uplink changed its state |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.12 | ColumnriCoStatusUplinkSynchronized | read-only | current | Synchronization status for this uplink: - synchronized(1): Synchronize enabled and ok - notSynchronized(2): Synchronize enabled and fails - notApplicable(3): N… |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.13 | ColumnriCoStatusUplinkPreferred | read-only | current | Preferred uplink status. Only valid for Dual-Homing uplinks whit synchronization enabled. - preferred(1): Dual-Homing uplink has status 'Preferred' - notPrefer… |
| 1.3.6.1.4.1.16177.2.1.3.5.2.1.14 | ColumnriCoStatusUplinkLocal | read-only | current | Local(true) or global(false) instance |
| 1.3.6.1.4.1.16177.2.1.3.5.3 | TableriCoCfgTable | not-accessible | current | Table containing a list of RiCo couplings. |
| 1.3.6.1.4.1.16177.2.1.3.5.3.1 | RowriCoCfgEntry | not-accessible | current | The row in the riCoTable containing settings for a specific RiCo or Dual-Homing instance. |
| 1.3.6.1.4.1.16177.2.1.3.5.3.1.1 | ColumnriCoCfgRingIdx | read-create | current | The ring instance ID of this RiCo/Dual-Homing instance (only of local significance to this unit). - For RiCo instances, the ring ID corresponds to the associat… |
| 1.3.6.1.4.1.16177.2.1.3.5.3.1.2 | ColumnriCoCfgCouplingIdx | read-create | current | The ID of this RiCo/Dual-Homing instance. (only of local significance to this unit). Unique per ring instance (riCoCfgRingIdx). |
| 1.3.6.1.4.1.16177.2.1.3.5.3.1.3 | ColumnriCoCfgEnabled | read-create | current | Enable or disable the RiCo instance True (1) or False (2) |
| 1.3.6.1.4.1.16177.2.1.3.5.3.1.4 | ColumnriCoCfgHelloInterval | read-create | current | Configured RiCo Ring Hello interval in milliseconds. - Default: 100 milliseconds - Configurable in range: 50-1000 milliseconds - Not applicable for Dual Homing… |
| 1.3.6.1.4.1.16177.2.1.3.5.3.1.5 | ColumnriCoCfgSynchronize | read-create | current | Enable/disable Uplink synchronization. 'True' to enable, and 'False' to disable synchronization. Note: Only configurable for Dual-Homing Uplinks. For RiCo Upli… |
| 1.3.6.1.4.1.16177.2.1.3.5.3.1.6 | ColumnriCoCfgRowStatus | read-create | current | This object indicates the status of this table entry. This object can also be used to create or delete instances. At most 1 RiCo instance and at most 8 Dual-Ho… |
| 1.3.6.1.4.1.16177.2.1.3.5.4 | TableriCoCfgUplinkTable | not-accessible | current | Table containing RiCo and Dual-Homing uplinks and corresponding settings per link. |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1 | RowriCoCfgUplinkEntry | not-accessible | current | The row in the riCoLinkTable containing settings and status information for a specific RiCo or Dual-Homing Uplink. |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.1 | ColumnriCoCfgUplinkRingIdx | read-create | current | The ring instance ID of this RiCo/Dual-Homing instance (only of local significance to this unit). - For RiCo instances, the ring ID corresponds to the associat… |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.2 | ColumnriCoCfgUplinkCouplingIdx | read-create | current | The ID of this RiCo/Dual-Homing instance. (only of local significance to this unit). Unique per ring instance (riCoStatusRingIdx). |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.3 | ColumnriCoCfgUplinkIfIndex | read-create | current | The interface index of the uplink port. For local uplinks, this index corresponds to the port's index in the ifTable (IF-MIB). |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.4 | ColumnriCoCfgUplinkPrio | read-create | current | Configure priority for this uplink (128 as default). A lower value increases the chance to be elected as active uplink. |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.5 | ColumnriCoCfgUplinkAdjust | read-create | current | Configure adjust value for this uplink (sticky uplink). The effictive priority is reduced by the adjust value if the link becomes elected as active uplink. Def… |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.6 | ColumnriCoCfgUplinkEchoTime | read-create | current | Uplink echo interval to be set for this uplink in milliseconds. Default: 200 ms Range: 20-1000 ms |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.7 | ColumnriCoCfgUplinkPathCost | read-create | current | Path-cost to be set for this uplink. '0' means 'Auto', which lets path cost depend on speed and duplex of the uplink. |
| 1.3.6.1.4.1.16177.2.1.3.5.4.1.8 | ColumnriCoCfgUplinkRowStatus | read-create | current | This object indicates the status of this table entry. |
| 1.3.6.1.4.1.16177.2.1.3.6 | NodelldpCtlv | |||
| 1.3.6.1.4.1.16177.2.1.3.6.1 | TablelldpCtlvTable | not-accessible | current | The LLDP custom TLV (Type 127) configuration table |
| 1.3.6.1.4.1.16177.2.1.3.6.1.1 | RowlldpCtlvEntry | not-accessible | current | A custom TLV entry. |
| 1.3.6.1.4.1.16177.2.1.3.6.1.1.1 | ColumnlldpCtlvIdx | read-only | current | Index of this custom TLV. Only of local significance. |
| 1.3.6.1.4.1.16177.2.1.3.6.1.1.2 | ColumnlldpCtlvOui | read-create | current | Organizationally unique identifier (OUI), 3 hex-encoded bytes. Required. |
| 1.3.6.1.4.1.16177.2.1.3.6.1.1.3 | ColumnlldpCtlvSubType | read-create | current | Organizationally defined subtype, one byte. Default: 0 |
| 1.3.6.1.4.1.16177.2.1.3.6.1.1.4 | ColumnlldpCtlvInfo | read-create | current | Information/value part of custom TLV. 0-507 octets encoded as hex. Default: Empty |
| 1.3.6.1.4.1.16177.2.1.3.6.1.1.5 | ColumnlldpCtlvRowStatus | read-create | current | This object indicates the status of this table entry. Used to create or delete a custom TLV entry. |
| 1.3.6.1.4.1.16177.2.1.3.6.2 | TablelldpCtlvPortTable | not-accessible | current | Table specifying which custom TLV(s) to transmit per port. Each row in the table maps a custom TLV to a port. Each custom TLV in the lldpCtlvTable can be mappe… |
| 1.3.6.1.4.1.16177.2.1.3.6.2.1 | RowlldpCtlvPortEntry | not-accessible | current | Each entry maps a custom TLV to a port. |
| 1.3.6.1.4.1.16177.2.1.3.6.2.1.1 | ColumnlldpCtlvPortIdx | not-accessible | current | The logical number of the port. This is the same number as the dot1dBasePort (dot1dBasePortTable of BRIDGE-MIB) for this port. |
| 1.3.6.1.4.1.16177.2.1.3.6.2.1.2 | ColumnlldpCtlvPortCtlvIdx | not-accessible | current | Custom TLV index (lldpCtlvTable) |
| 1.3.6.1.4.1.16177.2.1.3.6.2.1.3 | ColumnlldpCtlvPortRowStatus | read-create | current | This object indicates the status of this table entry. Used to create or delete a 'custom TLV to port' mapping. |
| 1.3.6.1.4.1.16177.2.1.3.6.3 | TablelldpRemCtlvTable | not-accessible | current | Table listing all custom TLV(s) received. Each entry represents a custom TLV received on a specific port from individual neighbours. Entries are removed when t… |
| 1.3.6.1.4.1.16177.2.1.3.6.3.1 | RowlldpRemCtlvEntry | not-accessible | current | Custom TLV received on a port. |
| 1.3.6.1.4.1.16177.2.1.3.6.3.1.1 | ColumnlldpRemCtlvLocalPort | read-only | current | The logical number of the local port receiving this custom TLV. This is the same number as the dot1dBasePort (dot1dBasePortTable of BRIDGE-MIB) for this port. |
| 1.3.6.1.4.1.16177.2.1.3.6.3.1.2 | ColumnlldpRemCtlvMacAddress | read-only | current | The MAC address of the neighbour node sending this custom TLV. |
| 1.3.6.1.4.1.16177.2.1.3.6.3.1.3 | ColumnlldpRemCtlvOui | read-only | current | Organizationally unique identifier (OUI), 3 hex-encoded bytes. |
| 1.3.6.1.4.1.16177.2.1.3.6.3.1.4 | ColumnlldpRemCtlvSubType | read-only | current | Organizationally defined subtype, one byte. |
| 1.3.6.1.4.1.16177.2.1.3.6.3.1.5 | ColumnlldpRemCtlvInfo | read-only | current | Information/value part of custom TLV. 0-507 octets encoded as hex. |
| 1.3.6.1.4.1.16177.2.1.4 | Nodenet | |||
| 1.3.6.1.4.1.16177.2.1.4.1 | Nodeiface | |||
| 1.3.6.1.4.1.16177.2.1.4.1.1 | NodeifaceCommon | |||
| 1.3.6.1.4.1.16177.2.1.4.1.2 | NodeifaceInet4 | |||
| 1.3.6.1.4.1.16177.2.1.4.1.2.1 | Scalarinet4StaticDefaultGatewayAddress | read-write | current | IP Address of statically configured default gateway. Setting the address to 0.0.0.0 means that there is 'no static default gateway' configured. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.2 | Tableinet4BaseIfaceTable | not-accessible | current | Table containing base IPv4 settings per interface |
| 1.3.6.1.4.1.16177.2.1.4.1.2.2.1 | Rowinet4BaseIfaceEntry | not-accessible | current | Entry in ipv4Interface table. Each row holds IPv4 settings specific to this interface. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.2.1.1 | Columninet4BaseIfIndex | read-only | current | Uniquely identifies an interface; same interface as identied by the same value of ifIndex in the interfaces group. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.2.1.2 | Columninet4BaseIfName | read-only | current | The name matches the corresponding ifName in the ifXTable. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.2.1.3 | Columninet4BaseAddressMode | read-write | current | The IPv4 address assignment mode. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.3 | Tableinet4StaticTable | not-accessible | current | Table containing settings for static IPv4 interfaces |
| 1.3.6.1.4.1.16177.2.1.4.1.2.3.1 | Rowinet4StaticEntry | not-accessible | current | Entry in ipv4Interface table. Each row holds IPv4 settings specific to this interface. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.3.1.1 | Columninet4StatIfIndex | read-only | current | Uniquely identifies an interface; same interface as identied by the same value of ifIndex in the interfaces group. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.3.1.2 | Columninet4StatIfName | read-only | current | The name matches the corresponding ifName in the ifXTable. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.3.1.3 | Columninet4StatAddress | read-write | current | Statically configured IPv4 address for this interface. Address 0.0.0.0 means that the interface is disabled. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.3.1.4 | Columninet4StatNetmask | read-write | current | Netmask of statically assigned IP address. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.4 | Tableinet4DhcpTable | not-accessible | current | Table containing settings for IPv4 interfaces using DHCP for address assignment |
| 1.3.6.1.4.1.16177.2.1.4.1.2.4.1 | Rowinet4DhcpEntry | not-accessible | current | Entry in inet4Dhcp table. Each row holds DHCP settings specific to this interface. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.4.1.1 | Columninet4DhcpIfIndex | read-only | current | Uniquely identifies an interface; same interface as identied by the same value of ifIndex in the interfaces group. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.4.1.2 | Columninet4DhcpIfName | read-only | current | The name matches the corresponding ifName in the ifXTable. |
| 1.3.6.1.4.1.16177.2.1.4.1.2.4.1.3 | Columninet4DhcpClientId | read-only | current | Client ID passed by DHCP client to DHCP server. |
| 1.3.6.1.4.1.16177.2.1.4.1.4 | NodeaddressConflict | |||
| 1.3.6.1.4.1.16177.2.1.4.1.4.1 | ScalaraddressConflictExists | read-only | current | True if there are any conflicts detected, False if there are no more conflicts detected. |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2 | TableaddressConflictTable | not-accessible | current | A list containing all IP and MAC address conflicts currently on the this device |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1 | RowaddressConflictEntry | not-accessible | current | An entry containing details for the conflict |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1.1 | ColumnaddressConflictIndex | read-only | current | A unique value for each conflict. |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1.2 | ColumnaddressConflictIfIndex | read-only | current | Index of the interface on this device. |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1.3 | ColumnaddressConflictIfName | read-only | current | Name of the interface on this device. |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1.4 | ColumnaddressConflictType | read-only | current | Type of conflict: 1 : IP, 2 : MAC, 3 : IP & MAC |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1.5 | ColumnaddressConflictMacAddress | read-only | current | The MAC address of the conflicting peer. |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1.6 | ColumnaddressConflictIPv4Address | read-only | current | The IPv4 address of the conflicting peer. |
| 1.3.6.1.4.1.16177.2.1.4.1.4.2.1.7 | ColumnaddressConflictTime | read-only | current | Time (in seconds) elapsed since conflict was last detected. |
| 1.3.6.1.4.1.16177.2.1.4.2 | Nodettdp | |||
| 1.3.6.1.4.1.16177.2.1.4.2.1 | ScalaretbnInhibitionEnabled | read-write | current | ETBN inhibition enabled or disabled. |
| 1.3.6.1.4.1.16177.2.1.5 | Nodesystem | |||
| 1.3.6.1.4.1.16177.2.1.5.1 | Nodeservices | |||
| 1.3.6.1.4.1.16177.2.1.5.1.1 | Nodesnmp | |||
| 1.3.6.1.4.1.16177.2.1.5.1.1.1 | ScalartrapCommunity | read-write | current | The trap community name which traps destined to defined traphost(s) are sent with. |
| 1.3.6.1.4.1.16177.2.1.5.1.1.2 | TabletrapHostTable | not-accessible | current | A list of SNMP trap host. |
| 1.3.6.1.4.1.16177.2.1.5.1.1.2.1 | RowtrapHostEntry | not-accessible | current | An entry containing information about a specific SNMP trap host. |
| 1.3.6.1.4.1.16177.2.1.5.1.1.2.1.1 | ColumntrapHostId | read-only | current | The id of this SNMP Trap Host (only of local significance to this unit). |
| 1.3.6.1.4.1.16177.2.1.5.1.1.2.1.2 | ColumntrapHostAddressType | read-only | current | The type of Internet address by which the trap host is reachable. |
| 1.3.6.1.4.1.16177.2.1.5.1.1.2.1.3 | ColumntrapHostAddress | read-create | current | The IP address or Domain name for the trap host. |
| 1.3.6.1.4.1.16177.2.1.5.1.1.2.1.4 | ColumntrapHostRowStatus | read-create | current | This object indicates the status of this table entry. |
| 1.3.6.1.4.1.16177.2.1.5.1.1.3 | ScalarroCommunity | read-write | current | The read-only community name used to by SNMPv1/v2 to read SNMP MIB parameters. The string 'Disabled' have a special meaning and cannot be used as roCommunity s… |
| 1.3.6.1.4.1.16177.2.1.5.1.1.4 | ScalarrwCommunity | read-write | current | Provides a mechanism to change or enable/disable the read-write community name used to by SNMPv1/v2 to read and set SNMP MIB parameters, however, for security … |
| 1.3.6.1.4.1.16177.2.1.5.1.2 | Nodeweb | |||
| 1.3.6.1.4.1.16177.2.1.5.1.2.1 | ScalarwebEnabled | read-write | current | Web daemon enabled or disabled. |
| 1.3.6.1.4.1.16177.2.1.5.1.3 | Nodeipconfig | |||
| 1.3.6.1.4.1.16177.2.1.5.1.3.1 | ScalaripconfigEnabled | read-write | current | IPConfig daemon enabled or disabled. |
| 1.3.6.1.4.1.16177.2.1.5.1.4 | Nodessh | |||
| 1.3.6.1.4.1.16177.2.1.5.1.4.1 | ScalarsshEnabled | read-write | current | SSH daemon enabled or disabled. |
| 1.3.6.1.4.1.16177.2.1.5.1.5 | Nodelldp | |||
| 1.3.6.1.4.1.16177.2.1.5.1.5.1 | ScalarlldpEnabled | read-write | current | LLDP service enabled or disabled. - True: Enabling LLDP will enable the LLDP service with default settings. - False: Disabling LLDP will fully disable the LLDP… |
| 1.3.6.1.4.1.16177.2.1.5.1.5.2 | ScalarlldpActivated | read-write | current | Activate/deactivate LLDP configuration. - True: LLDP daemon enabled with existing configuration - False: LLDP daemon deactivated. LLDP configuration (lldpPortC… |
| 1.3.6.1.4.1.16177.2.1.5.2 | NodeeventSystem | |||
| 1.3.6.1.4.1.16177.2.1.5.2.1 | ScalarsummaryAlarmStatus | read-only | current | The summaryAlarmStatus reports ''warning'' when at least one of the configured alarm/event sources reports alarm condition. WeOS supports an extensive set of a… |
| 1.3.6.1.4.1.16177.2.1.5.2.2 | ScalarsummaryAlarmTrapEnabled | read-write | current | Enable/Disable support for sending summaryAlarm traps. True(1) if summaryAlarm traps are enabled. False(2) if summaryAlarm traps are disabled. Traps will be se… |
| 1.3.6.1.4.1.16177.2.1.5.2.3 | ScalarstatusRelay | read-only | current | Displays the current state of the statusRelay (DigitalOut). |
| 1.3.6.1.4.1.16177.2.1.5.2.4 | TablealarmStatusTable | not-accessible | current | The status for alarm triggers. |
| 1.3.6.1.4.1.16177.2.1.5.2.4.1 | RowalarmStatusEntry | not-accessible | current | An entry containing information about a specific alarm trigger. |
| 1.3.6.1.4.1.16177.2.1.5.2.4.1.1 | ColumnalarmStatusTriggerId | read-only | current | The id of alarm trigger |
| 1.3.6.1.4.1.16177.2.1.5.2.4.1.2 | ColumnalarmStatusTriggerType | read-only | current | A text string containing description about the trigger type |
| 1.3.6.1.4.1.16177.2.1.5.2.4.1.3 | ColumnalarmStatusTriggerEnabled | read-only | current | Indicates if the trigger is enabled or not |
| 1.3.6.1.4.1.16177.2.1.5.2.4.1.4 | ColumnalarmStatusTriggerStatus | read-only | current | The actual alarm status for the trigger |
| 1.3.6.1.4.1.16177.2.1.5.2.4.1.5 | ColumnalarmStatusTriggerStatusReason | read-only | current | A text string containing status reason |
| 1.3.6.1.4.1.16177.2.1.5.3 | Nodestatistics | |||
| 1.3.6.1.4.1.16177.2.1.5.3.1 | ScalarmemoryAvail | read-only | current | Displays the amount of available memory in kb for the system. |
| 1.3.6.1.4.1.16177.2.1.5.3.2 | NodecpuLoadAvg | |||
| 1.3.6.1.4.1.16177.2.1.5.3.2.1 | ScalarloadAvg1 | read-only | current | Displays a the cpu load average over 1 minute. The value is displayed by taking the cpu load avgerage value and multiplying it with 100. |
| 1.3.6.1.4.1.16177.2.1.5.3.2.2 | ScalarloadAvg5 | read-only | current | Displays a the cpu load average over 5 minutes. The value is displayed by taking the cpu load avgerage value and multiplying it with 100. |
| 1.3.6.1.4.1.16177.2.1.5.3.2.3 | ScalarloadAvg15 | read-only | current | Displays a the cpu load average over 15 minute. The value is displayed by taking the cpu load avgerage value and multiplying it with 100. |
| 1.3.6.1.4.1.16177.2.1.5.4 | Nodeintegrity | |||
| 1.3.6.1.4.1.16177.2.1.5.4.1 | ScalarstartupConfigurationHash | read-only | current | A SHA-1 hash of the saved startup configuration. |
| 1.3.6.1.4.1.16177.2.1.5.4.2 | ScalarrunningConfigurationHash | read-only | current | A SHA-1 hash of the current running configuration. |
| 1.3.6.1.4.1.16177.2.1.6 | Nodenotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.1 | NodesensorNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.1.0 | NodesensorNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.1.0.1 | NotificationdigitalInHigh | current | Notification associated with digitalIn sensor state. Sensor is of type TruthValue. The 'entPhySensorValue' should always have value 'true(1)' in a digitalInHig… | |
| 1.3.6.1.4.1.16177.2.1.6.1.0.2 | NotificationdigitalInLow | current | Notification associated with digitalIn sensor state. Sensor is of type TruthValue. The 'entPhySensorValue' should always have value 'false(2)' in a digitalInLo… | |
| 1.3.6.1.4.1.16177.2.1.6.1.0.3 | NotificationpowerSupplyHigh | current | Notification associated with power supply sensor state. Sensor is of type TruthValue The 'entPhySensorValue' should always have value 'true(1)' in a powerSuppl… | |
| 1.3.6.1.4.1.16177.2.1.6.1.0.4 | NotificationpowerSupplyLow | current | Notification associated with power supply sensor state. Sensor is of type TruthValue The 'entPhySensorValue' should always have value 'false(2)' in a powerSupp… | |
| 1.3.6.1.4.1.16177.2.1.6.1.0.5 | NotificationtemperatureHigh | current | Notification associated with temperature sensor state. Sensor is of type 'Celsius'. The 'entPhySensorValue' shows the temperature value at the time the alarm s… | |
| 1.3.6.1.4.1.16177.2.1.6.1.0.6 | NotificationtemperatureLow | current | Notification associated with temperature sensor state. Sensor is of type 'Celsius'. The 'entPhySensorValue' shows the temperature value at the time the alarm s… | |
| 1.3.6.1.4.1.16177.2.1.6.2 | NodefrntNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.2.0 | NodefrntNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.2.0.1 | Notificationfrntv0RingUp | current | Notification associated with FRNTv0 ring status. The 'frntv0RingStatus' should always have value 'ring(1)' in an frntv0RingUp trap. Note that a focal point can… | |
| 1.3.6.1.4.1.16177.2.1.6.2.0.2 | Notificationfrntv0RingDown | current | Notification associated with FRNTv0 ring status. The 'frntv0RingStatus' should always have value 'bus(2)' in an frntv0RingDown trap. Note that a focal point ca… | |
| 1.3.6.1.4.1.16177.2.1.6.3 | NodelffNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.3.0 | NodelffNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.3.0.1 | NotificationlffRemoteUp | current | Notification associated with link fault forward of remote (Ethernet) link over an intermediate (SHDSL) link. The 'lffStatus' should always have value 'remoteUp… | |
| 1.3.6.1.4.1.16177.2.1.6.3.0.2 | NotificationlffRemoteFail | current | Notification associated with link fault forward of remote (Ethernet) link over an intermediate (SHDSL) link. The 'lffStatus' will show value - 'remoteDown(3)' … | |
| 1.3.6.1.4.1.16177.2.1.6.4 | NodegenericNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.4.0 | NodegenericNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.4.0.1 | NotificationsummaryStatusOK | current | Notification that _none_ of the configured alarm sources reports a bad state, i.e., - that the summaryAlarmStatus has _shifted_ from 'Warning (1)' to 'Ok (2)',… | |
| 1.3.6.1.4.1.16177.2.1.6.4.0.2 | NotificationsummaryStatusWarning | current | Notification that at least one of the configured alarm sources reports a bad state, i.e., - that the summaryAlarmStatus has _shifted_ from 'Ok (2)' to 'Warning… | |
| 1.3.6.1.4.1.16177.2.1.6.5 | NodeddmNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.5.0 | NodeddmNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.5.0.1 | NotificationddmVoltageHigh | current | Notification associated with DDM voltage sensor state. The 'sfpDdmPortVoltage' shows the voltage value at the time the alarm system detected that the voltage h… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.2 | NotificationddmVoltageLow | current | Notification associated with DDM voltage sensor state. The 'sfpDdmPortVoltage' shows the voltage value at the time the alarm system detected that the voltage h… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.3 | NotificationddmTemperatureHigh | current | Notification associated with DDM temperature sensor state. The 'sfpDdmPortTemperature' shows the temperature value at the time the alarm system detected that t… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.4 | NotificationddmTemperatureLow | current | Notification associated with DDM temperature sensor state. The 'sfpDdmPortTemperature' shows the temperature value at the time the alarm system detected that t… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.5 | NotificationddmBiasCurrentHigh | current | Notification associated with DDM transmitt bias current sensor state. The 'sfpDdmPortBiasCurrent' shows the bias current value at the time the alarm system det… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.6 | NotificationddmBiasCurrentLow | current | Notification associated with DDM transmitt bias current sensor state. The 'sfpDdmPortBiasCurrent' shows the bias current value at the time the alarm system det… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.7 | NotificationddmTxPowerHigh | current | Notification associated with DDM transmitt power sensor state. The 'sfpDdmPortTxPower' shows the power value at the time the alarm system detected that the pow… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.8 | NotificationddmTxPowerLow | current | Notification associated with DDM transmitt power sensor state. The 'sfpDdmPortTxPower' shows the power value at the time the alarm system detected that the pow… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.9 | NotificationddmRxPowerHigh | current | Notification associated with DDM receiving power sensor state. The 'sfpDdmPortRxPower' shows the power value at the time the alarm system detected that the pow… | |
| 1.3.6.1.4.1.16177.2.1.6.5.0.10 | NotificationddmRxPowerLow | current | Notification associated with DDM receiving power sensor state. The 'sfpDdmPortRxPower' shows the power value at the time the alarm system detected that the pow… | |
| 1.3.6.1.4.1.16177.2.1.6.6 | NodeconflictNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.6.0 | NodeconflictNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.6.0.1 | NotificationaddressConflictDetected | current | An Address Conflict have been detected. | |
| 1.3.6.1.4.1.16177.2.1.6.6.0.2 | NotificationaddressConflictCleared | current | An Address Conflict have been resolved. | |
| 1.3.6.1.4.1.16177.2.1.6.6.0.3 | NotificationaddressConflictOK | current | There are no Address Conflicts. This trap is sent when the last conflict is resolved. | |
| 1.3.6.1.4.1.16177.2.1.6.6.0.4 | NotificationaddressConflictWarning | current | An address conflict exists. This trap is sent when the first address conflict is detected. | |
| 1.3.6.1.4.1.16177.2.1.6.7 | NodeotherNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.7.0 | NodeotherNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.7.0.3 | NotificationmrpRingClosed | current | Notification associated with MRP ring state. | |
| 1.3.6.1.4.1.16177.2.1.6.7.0.4 | NotificationmrpRingOpen | current | Notification associated with MRP ring state. | |
| 1.3.6.1.4.1.16177.2.1.6.8 | NoderiCoNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.8.0 | NoderiCoNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.8.0.1 | NotificationriCoUplinkUp | current | A RiCo or Dual Homing uplink has come up. The riCoStatusUplinkStatus shows if the link comes up in role Active or Backup. | |
| 1.3.6.1.4.1.16177.2.1.6.8.0.2 | NotificationriCoUplinkDown | current | A RiCo or Dual Homing uplink has gone down. The riCoStatusUplinkStatus shows 'Down'. | |
| 1.3.6.1.4.1.16177.2.1.6.9 | NodepingNotifications | |||
| 1.3.6.1.4.1.16177.2.1.6.9.0 | NodepingNotificationPrefix | |||
| 1.3.6.1.4.1.16177.2.1.6.9.0.1 | NotificationpingTriggerOk | current | Notification associated with ping trigger status. | |
| 1.3.6.1.4.1.16177.2.1.6.9.0.2 | NotificationpingTriggerWarning | current | Notification associated with ping trigger status. |