WG302
179 objects
The MIB module for 802.11g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wg302(6)
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | enterprises IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526 | Nodenetgear | |||
| 1.3.6.1.4.1.4526.4 | Nodewireless | |||
| 1.3.6.1.4.1.4526.4.6 | Identitywg302 | The MIB module for 802.11g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wg302(… | ||
| 1.3.6.1.4.1.4526.4.6.1 | NodelanSettings | |||
| 1.3.6.1.4.1.4526.4.6.1.1 | ScalarapName | read-write | current | The field indicates the name of AP. |
| 1.3.6.1.4.1.4526.4.6.1.2 | ScalarsysMacAddress | read-only | current | This field indicates the system MAC Address. |
| 1.3.6.1.4.1.4526.4.6.1.3 | ScalarsysVersion | read-only | current | This field indicates the system firmware version. |
| 1.3.6.1.4.1.4526.4.6.1.4 | ScalarsysCountryRegion | read-write | current | This attribute shall indicate the region of operation for which which the wireless interface is intended. =752: sweden =826: unitedKingdom =840: usa |
| 1.3.6.1.4.1.4526.4.6.1.5 | ScalaradminName | not-accessible | obsolete | The field indicates the administrator name. |
| 1.3.6.1.4.1.4526.4.6.1.6 | ScalaradminPasswd | not-accessible | obsolete | The field indicates the administrator password. The AP can be managed in such way as utility,telnet and so on. |
| 1.3.6.1.4.1.4526.4.6.1.7 | ScalardhcpStatus | read-write | current | This attribute shall indicate whether dhcp client status. |
| 1.3.6.1.4.1.4526.4.6.1.8 | ScalaripAddr | read-write | current | The field indicates the IP address of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same … |
| 1.3.6.1.4.1.4526.4.6.1.9 | ScalarnetmaskAddr | read-write | current | The field indicates the netmask of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same net… |
| 1.3.6.1.4.1.4526.4.6.1.10 | ScalargatewayAddr | read-write | current | The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gat… |
| 1.3.6.1.4.1.4526.4.6.1.11 | ScalarpridnsipAddr | read-write | current | This attributes shall indicates the IP address of the primary DNS server. ***The value can only be set to an IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.1.12 | ScalarsnddnsipAddr | read-write | current | This attributes shall indicates the IP address of the secondary DNS server. ***The value can only be set to an IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.1.13 | Scalarspantree | read-write | current | This attribute shall indicate spanning tree. |
| 1.3.6.1.4.1.4526.4.6.1.14 | ScalarvlanEnable | read-only | current | This attribute shall indicate whether enable VLAN(802.1Q). |
| 1.3.6.1.4.1.4526.4.6.1.15 | ScalarmanagementVlanID | read-only | current | This attribute shall indicate the Management VLAN ID. |
| 1.3.6.1.4.1.4526.4.6.1.16 | ScalaruntaggedVlanID | read-only | current | This attribute shall indicate the Untagged VLAN ID. |
| 1.3.6.1.4.1.4526.4.6.2 | TablewlanSettingTable | not-accessible | current | wlanSettingsallow for multiple instances on an agent. |
| 1.3.6.1.4.1.4526.4.6.2.1 | RowwlanSettingEntry | not-accessible | current | An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship betwee… |
| 1.3.6.1.4.1.4526.4.6.2.1.1 | Columnoperatemode | read-only | current | This attribute shall indicate the desired wireless operating mode. The option are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11b - All … |
| 1.3.6.1.4.1.4526.4.6.2.1.2 | ColumnradioEnable | read-write | current | This attribute shall indicate whether the radio is enabled. |
| 1.3.6.1.4.1.4526.4.6.2.1.3 | Columnchannel | read-write | current | This attribute shall indicate the channel number to be used. |
| 1.3.6.1.4.1.4526.4.6.2.1.4 | Columndatarate | read-only | current | This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9… |
| 1.3.6.1.4.1.4526.4.6.2.1.5 | ColumnwmmSupport | read-write | current | This field indicates whether support WMM(Wireless Multimedia). |
| 1.3.6.1.4.1.4526.4.6.2.1.6 | Columnbeaconinterval | read-write | current | This attribute shall indicate the Beacon Interval. |
| 1.3.6.1.4.1.4526.4.6.2.1.7 | Columnrtsthreshold | read-write | current | This attribute shall indicate the RTS threshold. |
| 1.3.6.1.4.1.4526.4.6.2.1.8 | Columnfraglength | read-write | current | This attribute shall indicate the fragmentation threshold. |
| 1.3.6.1.4.1.4526.4.6.2.1.9 | Columndtiminterval | read-write | current | This attribute shall indicate the DTIM period. |
| 1.3.6.1.4.1.4526.4.6.2.1.10 | Columnpreambletype | read-only | current | This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode. |
| 1.3.6.1.4.1.4526.4.6.2.1.11 | Columntxpower | read-write | current | This attribute shall indicate the tranmiste power. |
| 1.3.6.1.4.1.4526.4.6.2.1.12 | ColumnsuperG | read-write | current | This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled. |
| 1.3.6.1.4.1.4526.4.6.2.1.13 | ColumnaccessControlMode | read-only | current | The field indicates whether the access control list is enabled and the source of the database of the access control list. |
| 1.3.6.1.4.1.4526.4.6.2.1.14 | Columnantenna | read-write | obsolete | This attribute shall indicate the tranmistted power. |
| 1.3.6.1.4.1.4526.4.6.3 | NodevapSetting | |||
| 1.3.6.1.4.1.4526.4.6.3.1 | TablevapWepAndGlobalSettingTable | not-accessible | current | VAP attributes setting table. |
| 1.3.6.1.4.1.4526.4.6.3.1.1 | RowvapWepAndGlobalSettingEntry | not-accessible | current | VAP attributes setting table. |
| 1.3.6.1.4.1.4526.4.6.3.1.1.1 | ColumnwepKeyType | read-write | current | The field shall indicate the type of WEP key. |
| 1.3.6.1.4.1.4526.4.6.3.1.1.2 | Columnkey1 | read-write | current | The field indicates the key value of the first default wep key. |
| 1.3.6.1.4.1.4526.4.6.3.1.1.3 | Columnkey2 | read-write | current | The field indicates the key value of the second default wep key. |
| 1.3.6.1.4.1.4526.4.6.3.1.1.4 | Columnkey3 | read-write | current | The field indicates the key value of the third default wep key. |
| 1.3.6.1.4.1.4526.4.6.3.1.1.5 | Columnkey4 | read-write | current | The field indicates the key value of the fourth default wep key. |
| 1.3.6.1.4.1.4526.4.6.3.1.1.6 | ColumnwepPassPhrase | read-write | current | This attribute shall indicate WEP pass phrase, used to generate four WEP keys. |
| 1.3.6.1.4.1.4526.4.6.3.2 | TablevapSettingTable | not-accessible | current | VAP attributes setting table. |
| 1.3.6.1.4.1.4526.4.6.3.2.1 | RowvapSettingEntry | not-accessible | current | VAP attributes setting table. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.1 | ColumnvapIndex | read-only | current | Description. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.2 | ColumnvapEnable | read-write | current | This attribute shall indicate whether enable VAP. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.3 | Columnssid | read-write | current | This attribute shall indicate SSID.Its length can't be large than 33 . |
| 1.3.6.1.4.1.4526.4.6.3.2.1.4 | Columnhidenetworkname | read-write | current | This attribute shall indicate whether broadcast wireless network Name (SSID). |
| 1.3.6.1.4.1.4526.4.6.3.2.1.5 | ColumnvlanID | read-write | current | This attribute shall indicate the VLAN ID. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.6 | ColumnsecurityProfileName | read-write | current | Description. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.7 | Columnpresharekey | read-write | current | This attribute shall indicate preshare key. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.8 | Columnauthenticationtype | read-write | current | The field indicates how to authenticate the station. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.9 | Columnencryption | read-write | current | The field indicates how to encryption the station. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.10 | Columnkeyno | read-write | current | The field indicates the number of default wep key. |
| 1.3.6.1.4.1.4526.4.6.3.2.1.11 | Columnwlanseparator | read-write | current | This attribute shall indicate whether enable No see. |
| 1.3.6.1.4.1.4526.4.6.4 | NoderemoteSettings | |||
| 1.3.6.1.4.1.4526.4.6.4.1 | Scalarsshd | read-write | current | This attribute shall indicate whether the SSH is enabled. |
| 1.3.6.1.4.1.4526.4.6.4.2 | Scalarsnmpenable | read-only | current | This attribute shall indicate whether the SNMP agent is enabled. |
| 1.3.6.1.4.1.4526.4.6.4.3 | ScalartrapServerIP | read-write | current | The field indicates the trap server IP address. ***The value can only be set to an IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.4.4 | ScalartrapServerCommunity | read-write | current | The field indicates the trap server community name. ***The value can only be set to 1 to 32 readable string. |
| 1.3.6.1.4.1.4526.4.6.4.5 | ScalarreadOnlyCommunity | read-write | current | The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string. |
| 1.3.6.1.4.1.4526.4.6.4.6 | ScalarreadWriteCommunity | read-write | current | The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string. |
| 1.3.6.1.4.1.4526.4.6.5 | Nodestatistic | |||
| 1.3.6.1.4.1.4526.4.6.5.1 | Nodewiredethernetstat | |||
| 1.3.6.1.4.1.4526.4.6.5.1.1 | Scalarlanrecvpacket | read-only | current | the field indicates the sum of received packets. |
| 1.3.6.1.4.1.4526.4.6.5.1.2 | Scalarlantranspacket | read-only | current | the field indicates the sum of transmitted packets. |
| 1.3.6.1.4.1.4526.4.6.5.1.3 | Scalarlanrecvbytes | read-only | current | the field indicates the sum of received bytes. |
| 1.3.6.1.4.1.4526.4.6.5.1.4 | Scalarlantransbytes | read-only | current | the field indicates the sum of transmitted bytes. |
| 1.3.6.1.4.1.4526.4.6.5.2 | TablewirelessStatTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.4526.4.6.5.2.1 | RowwirelessStatEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.1 | Columnwlanrecvunicastpacket | read-only | current | the field indicates the sum of received unicast packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.2 | Columnwlantransunicastpacket | read-only | current | the field indicates the sum of transmitted unicast packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.3 | Columnwlanrecvbroadcastpacket | read-only | current | the field indicates the sum of received broadcast packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.4 | Columnwlantransbroadcastpacket | read-only | current | the field indicates the sum of transmitted broadcast packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.5 | Columnwlanrecvmulticastpacket | read-only | current | the field indicates the sum of received multicast packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.6 | Columnwlantransmulticastpacket | read-only | current | the field indicates the sum of transmitted multicast packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.7 | Columnwlanrecvpacket | read-only | current | the field indicates the sum of received packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.8 | Columnwlantranspacket | read-only | current | the field indicates the sum of transmitted packets. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.9 | Columnwlanrecvbytes | read-only | current | the field indicates the sum of received bytes. |
| 1.3.6.1.4.1.4526.4.6.5.2.1.10 | Columnwlantransbytes | read-only | current | the field indicates the sum of transmitted bytes. |
| 1.3.6.1.4.1.4526.4.6.6 | TablestationListTable | not-accessible | current | stationList Table show multiple instances on an agent. |
| 1.3.6.1.4.1.4526.4.6.6.1 | RowstationListEntry | not-accessible | current | An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship betwee… |
| 1.3.6.1.4.1.4526.4.6.6.1.1 | Columnmacaddress | read-only | current | This attribute shall indicate MAC address of the associated stationID. |
| 1.3.6.1.4.1.4526.4.6.6.1.2 | ColumnclientIpaddr | read-only | current | This attribute shall indicate Ip address of the associated stationID. |
| 1.3.6.1.4.1.4526.4.6.6.1.3 | ColumnclientWirelessMode | read-only | current | This attribute shall indicate the wireless mode of the associated stationID. |
| 1.3.6.1.4.1.4526.4.6.6.1.4 | Columnstationstatus | read-only | current | This attribute shall indicate the status of station. |
| 1.3.6.1.4.1.4526.4.6.7 | TablewlanWdsTable | not-accessible | current | WDS attributes in tablular form to allow for multiple instances on an agent. |
| 1.3.6.1.4.1.4526.4.6.7.1 | RowwlanWdsEntry | not-accessible | current | An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an… |
| 1.3.6.1.4.1.4526.4.6.7.1.1 | Columnapmode | read-only | current | This a command field for conntrol AP operation mode. |
| 1.3.6.1.4.1.4526.4.6.7.1.2 | Columnptpremotemacaddress | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.3 | Columnpxpremotemacaddress1 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.4 | Columnpxpremotemacaddress2 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.5 | Columnpxpremotemacaddress3 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.6 | Columnpxpremotemacaddress4 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.7 | Columnrepremotemacaddress1 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.8 | Columnrepremotemacaddress2 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.9 | Columnrepremotemacaddress3 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.10 | Columnrepremotemacaddress4 | read-write | current | This attribute shall indicate the stationID. |
| 1.3.6.1.4.1.4526.4.6.7.1.11 | ColumnlocalMacAddress | read-only | current | This attribute shall indicate the local MAC Address. |
| 1.3.6.1.4.1.4526.4.6.8 | Nodeinfo802dot1x | |||
| 1.3.6.1.4.1.4526.4.6.8.1 | Nodeauthinfo | |||
| 1.3.6.1.4.1.4526.4.6.8.1.1 | Scalarpriradipaddr | read-write | current | Internet address of the Primary Radius Server. |
| 1.3.6.1.4.1.4526.4.6.8.1.2 | Scalarpriradport | read-write | current | Port number used for authentication at the Primary Radius Server. |
| 1.3.6.1.4.1.4526.4.6.8.1.3 | Scalarpriradsharedsecret | read-write | current | Secret shared between NAS and the Primary Radius Server. |
| 1.3.6.1.4.1.4526.4.6.8.1.4 | Scalarsndradipaddr | read-write | current | Internet address of the Second Radius Server. |
| 1.3.6.1.4.1.4526.4.6.8.1.5 | Scalarsndradport | read-write | current | Port number used for authentication at the Second Radius Server. |
| 1.3.6.1.4.1.4526.4.6.8.1.6 | Scalarsndradsharedsecret | read-write | current | Secret shared between NAS and the Second Radius Server. |
| 1.3.6.1.4.1.4526.4.6.8.2 | Nodeaccntinfo | |||
| 1.3.6.1.4.1.4526.4.6.8.2.1 | Scalarpriacntipaddr | read-write | current | IP address of the Primary radius account server. |
| 1.3.6.1.4.1.4526.4.6.8.2.2 | Scalarpriacntport | read-write | current | port number of the Primary radius account server. |
| 1.3.6.1.4.1.4526.4.6.8.2.3 | Scalarpriacntsharedsecret | read-write | current | password used by the ap to connect to the Primary radius account serve. |
| 1.3.6.1.4.1.4526.4.6.8.2.4 | Scalarsndacntipaddr | read-write | current | IP address of the Second radius account server. |
| 1.3.6.1.4.1.4526.4.6.8.2.5 | Scalarsndacntport | read-write | current | port number of the Second radius account server. |
| 1.3.6.1.4.1.4526.4.6.8.2.6 | Scalarsndacntsharedsecret | read-write | current | password used by the ap to connect to the Second radius account server. |
| 1.3.6.1.4.1.4526.4.6.9 | NodeuserCommand | |||
| 1.3.6.1.4.1.4526.4.6.9.1 | ScalarresetAP | read-write | current | This a command field for conntrol AP action. Write value 1 to reset the AP. |
| 1.3.6.1.4.1.4526.4.6.10 | NodetimeSettings | |||
| 1.3.6.1.4.1.4526.4.6.10.1 | Scalarcurrenttime | read-only | current | This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss. |
| 1.3.6.1.4.1.4526.4.6.10.2 | Scalartimezone | read-write | current | This field indicates the timezone of the system. |
| 1.3.6.1.4.1.4526.4.6.10.3 | Scalardaylightsaving | read-write | current | This attribute shall indicate the Daylight Saving time. |
| 1.3.6.1.4.1.4526.4.6.11 | NodedhcpsSettings | |||
| 1.3.6.1.4.1.4526.4.6.11.1 | Scalardhcpserver | read-write | current | This attribute shall indicate whether DHCP server is enable or disable. |
| 1.3.6.1.4.1.4526.4.6.11.2 | Scalardhcpsipstart | read-write | current | This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.3 | Scalardhcpsipend | read-write | current | This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.4 | Scalardhcpnetmask | read-write | current | This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.5 | Scalardhcpsgateway | read-write | current | This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.6 | Scalardhcpspridns | read-write | current | This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.7 | Scalardhcpspsnddns | read-write | current | This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.8 | Scalardhcpspriwins | read-write | current | This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.9 | Scalardhcpspsndwins | read-write | current | This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.11.10 | Scalardhcpsleasetime | read-write | current | This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes |
| 1.3.6.1.4.1.4526.4.6.12 | NodelogSettings | |||
| 1.3.6.1.4.1.4526.4.6.12.1 | Scalarsyslog | read-write | current | This attribute shall indicate whether syslog is enable or disable. |
| 1.3.6.1.4.1.4526.4.6.12.2 | Scalarsyslogsrvip | read-write | current | This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.4.6.12.3 | Scalarsyslogsrvport | read-write | current | This attributes shall indicates the Port of the Syslog server. *** The value can only be set to a port in dot format. |
| 1.3.6.1.4.1.4526.4.6.13 | NodehttpRedirectSettings | |||
| 1.3.6.1.4.1.4526.4.6.13.1 | ScalarhttpRedirectEnable | read-write | current | Description. |
| 1.3.6.1.4.1.4526.4.6.13.2 | ScalarhttpRedirectURL | read-write | current | Description. |
| 1.3.6.1.4.1.4526.4.6.14 | TabledetectedApTable | not-accessible | current | detectedAp Table shows list of detected neighbouring APs. |
| 1.3.6.1.4.1.4526.4.6.14.1 | RowdetectedApEntry | not-accessible | current | An entry in the detectedApTable. |
| 1.3.6.1.4.1.4526.4.6.14.1.1 | Columnapmac | read-only | current | This attribute shall indicate MAC address of the detected AP. |
| 1.3.6.1.4.1.4526.4.6.14.1.2 | Columnapssid | read-only | current | This attribute shall indicate ssid of the detected AP. |
| 1.3.6.1.4.1.4526.4.6.14.1.3 | Columnapprivacy | read-only | current | This attribute shall indicate whether privacy is enabled. |
| 1.3.6.1.4.1.4526.4.6.14.1.4 | Columnapband | read-only | current | This attribute shall indicate the operating band of detected AP. |
| 1.3.6.1.4.1.4526.4.6.14.1.5 | Columnapchannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.4.6.14.1.6 | Columnaprate | read-only | current | This attribute shall indicate the rate. |
| 1.3.6.1.4.1.4526.4.6.14.1.7 | ColumnapbeaconInterval | read-only | current | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| 1.3.6.1.4.1.4526.4.6.14.1.8 | ColumnapnumBeacons | read-only | current | This attribute shall indicate the number of beacons received. |
| 1.3.6.1.4.1.4526.4.6.14.1.9 | ColumnaplastBeacon | read-only | current | This attribute shall indicate the time of the last beacon. |
| 1.3.6.1.4.1.4526.4.6.15 | TableknownApTable | not-accessible | current | knownAp Table shows list of known APs. |
| 1.3.6.1.4.1.4526.4.6.15.1 | RowknownApEntry | not-accessible | current | An entry in the knownApTable. |
| 1.3.6.1.4.1.4526.4.6.15.1.1 | Columnknownapmac | read-only | current | This attribute shall indicate MAC address of the known AP. |
| 1.3.6.1.4.1.4526.4.6.15.1.2 | Columnknownapssid | read-only | current | This attribute shall indicate ssid of the known AP. |
| 1.3.6.1.4.1.4526.4.6.15.1.3 | Columnknownapprivacy | read-only | current | This attribute shall indicate whether privacy is enabled. |
| 1.3.6.1.4.1.4526.4.6.15.1.4 | Columnknownapband | read-only | current | This attribute shall indicate the operating band of known AP. |
| 1.3.6.1.4.1.4526.4.6.15.1.5 | Columnknownapchannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.4.6.15.1.6 | Columnknownaprate | read-only | current | This attribute shall indicate the rate. |
| 1.3.6.1.4.1.4526.4.6.15.1.7 | ColumnknownapbeaconInterval | read-only | current | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| 1.3.6.1.4.1.4526.4.6.15.1.8 | ColumnknownapnumBeacons | read-only | current | This attribute shall indicate the number of beacons received. |
| 1.3.6.1.4.1.4526.4.6.15.1.9 | ColumnknownaplastBeacon | read-only | current | This attribute shall indicate the time of the last beacon. |
| 1.3.6.1.4.1.4526.4.6.15.1.10 | ColumnknownapEntryStatus | read-create | current | The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.4526.4.6.16 | TableunknownApTable | not-accessible | current | unknownAp Table shows list of unknown APs. |
| 1.3.6.1.4.1.4526.4.6.16.1 | RowunknownApEntry | not-accessible | current | An entry in the unknownApTable. |
| 1.3.6.1.4.1.4526.4.6.16.1.1 | Columnunknownapmac | read-only | current | This attribute shall indicate MAC address of the unknown AP. |
| 1.3.6.1.4.1.4526.4.6.16.1.2 | Columnunknownapssid | read-only | current | This attribute shall indicate ssid of the unknown AP. |
| 1.3.6.1.4.1.4526.4.6.16.1.3 | Columnunknownapprivacy | read-only | current | This attribute shall indicate whether privacy is enabled. |
| 1.3.6.1.4.1.4526.4.6.16.1.4 | Columnunknownapband | read-only | current | This attribute shall indicate the operating band of unknown AP. |
| 1.3.6.1.4.1.4526.4.6.16.1.5 | Columnunknownapchannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.4.6.16.1.6 | Columnunknownaprate | read-only | current | This attribute shall indicate the rate. |
| 1.3.6.1.4.1.4526.4.6.16.1.7 | ColumnunknownapbeaconInterval | read-only | current | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| 1.3.6.1.4.1.4526.4.6.16.1.8 | ColumnunknownapnumBeacons | read-only | current | This attribute shall indicate the number of beacons received. |
| 1.3.6.1.4.1.4526.4.6.16.1.9 | ColumnunknownaplastBeacon | read-only | current | This attribute shall indicate the time of the last beacon. |
| 1.3.6.1.4.1.4526.4.6.17 | TablewlanAccessControlLocalTable | not-accessible | current | ACL attributes in tablular form to allow for multiple instances on an agent. |
| 1.3.6.1.4.1.4526.4.6.17.1 | RowwlanAccessControlLocalEntry | not-accessible | current | An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relations… |
| 1.3.6.1.4.1.4526.4.6.17.1.1 | ColumnaclMAC | read-only | current | This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC addre… |
| 1.3.6.1.4.1.4526.4.6.17.1.2 | ColumnaclMacStatus | read-create | current | The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |