MIB Viewer

WHISP-BOX-MIBV2-MIB

772 objects
This module contains generic Box-Level MIB definitions for Canopy Radios.
Imported Objects
SNMPv2-CONFOBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Gauge32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString MacAddress
WHISP-GLOBAL-REG-MIBwhispBox whispModules
WHISP-TCV2-MIBEventString WhispLUID WhispMACAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.161.19.1.1.8IdentitywhispBoxLevelMibModuleThis module contains generic Box-Level MIB definitions for Canopy Radios.
1.3.6.1.4.1.161.19.3.3.1NodewhispBoxStatus
1.3.6.1.4.1.161.19.3.3.1.1ScalarwhispBoxSoftwareVerread-onlycurrentVersion of software. Should be noted in the event customer has technical difficulties and need to contact technical support.
1.3.6.1.4.1.161.19.3.3.1.2ScalarwhispBoxFPGAVerread-onlycurrentVersion of FPGA.
1.3.6.1.4.1.161.19.3.3.1.3ScalarwhispBoxEsnread-onlycurrentElectronic serial number(MAC address) assigned to Radio.
1.3.6.1.4.1.161.19.3.3.1.4ScalarwhispBoxBootread-onlycurrentSoftware boot version.
1.3.6.1.4.1.161.19.3.3.1.5ScalarboxTemperatureread-onlyobsoleteRadio temperature.
1.3.6.1.4.1.161.19.3.3.1.6ScalarboxDeviceTyperead-onlycurrentThe type of the device.
1.3.6.1.4.1.161.19.3.3.1.7ScalarboxDeviceTypeIDread-onlycurrentDevice type ID.
1.3.6.1.4.1.161.19.3.3.1.8ScalarboxEncryptionread-onlycurrentDevice encryption type. Note: Returns DES also when encryption is set to None on AP.
1.3.6.1.4.1.161.19.3.3.1.9ScalaretherLinkStatusread-onlycurrentEthernet link status.
1.3.6.1.4.1.161.19.3.3.1.10ScalarboxFrequencyread-onlycurrentFrequency band of the device.
1.3.6.1.4.1.161.19.3.3.1.11ScalarplatformVerread-onlycurrentHardware platform version. For internal use.
1.3.6.1.4.1.161.19.3.3.1.12ScalarplatformTyperead-onlycurrentPlatform type: Canopy, Canopy Lite, Canopy Lite - Advantage, Advantage, Russian, Russian - Advantage.
1.3.6.1.4.1.161.19.3.3.1.13ScalardhcpLanIpread-onlycurrentLAN interface IP obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.14ScalardhcpLanSubnetMaskread-onlycurrentLAN interface Subnet Mask obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.15ScalardhcpLanGatewayread-onlycurrentLAN interface Gateway obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.16ScalardhcpRfPublicIpread-onlycurrentRF Public interface IP obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.17ScalardhcpRfPublicSubnetMaskread-onlycurrentRF Public interface Subnet Mask obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.18ScalardhcpRfPublicGatewayread-onlycurrentRF Public interface Gateway obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.19ScalarlanDhcpStatusread-onlycurrentDisplay LAN interface current DHPC status.
1.3.6.1.4.1.161.19.3.3.1.20ScalarrfPublicDhcpStatusread-onlycurrentDisplay RF Public interface current DHPC status.
1.3.6.1.4.1.161.19.3.3.1.21ScalarinSyncCountread-onlycurrentCounter for number of In Synchronization.
1.3.6.1.4.1.161.19.3.3.1.22ScalaroutSyncCountread-onlycurrentCounter for number of Out of Synchronization.
1.3.6.1.4.1.161.19.3.3.1.23ScalarpllOutLockCountread-onlycurrentCounter for number of PLL out of Lock.
1.3.6.1.4.1.161.19.3.3.1.24ScalartxCalFailureread-onlycurrentCounter for number of TX Calibration failure.
1.3.6.1.4.1.161.19.3.3.1.25ScalarswVersionread-onlycurrentSoftware version information.
1.3.6.1.4.1.161.19.3.3.1.26ScalarpldVersionread-onlycurrentPLD version information.
1.3.6.1.4.1.161.19.3.3.1.27ScalarplatformInforead-onlycurrentPlatform information.
1.3.6.1.4.1.161.19.3.3.1.28ScalarantPolarizationread-onlycurrentAntenna polarization for FSK radios.
1.3.6.1.4.1.161.19.3.3.1.29ScalarpacketOverloadCounterread-onlycurrentTotal packet overload count.
1.3.6.1.4.1.161.19.3.3.1.30ScalarwhispBoxP11Personalityread-onlycurrentBoard Personality Configuration
1.3.6.1.4.1.161.19.3.3.1.31ScalarwhispBoxP11FPGATyperead-onlycurrentFPGA Type
1.3.6.1.4.1.161.19.3.3.1.32ScalarwhispBoxP11BstrapFPGAVerread-onlycurrentP11 Bootstrap FPGA Version.
1.3.6.1.4.1.161.19.3.3.1.33ScalarnumDFSDetectionsread-onlycurrentNumber of DFS Detections since last boot.
1.3.6.1.4.1.161.19.3.3.1.34ScalarrxOverrunPktsread-onlycurrentCounter for number of received overrun packets error.
1.3.6.1.4.1.161.19.3.3.1.35ScalarboxTemperatureCread-onlycurrentRadio temperature in Celsius.
1.3.6.1.4.1.161.19.3.3.1.36ScalarboxTemperatureFread-onlycurrentRadio temperature in Fahrenheit.
1.3.6.1.4.1.161.19.3.3.1.37ScalarbridgeCbFecStatbinread-onlycurrentBridge CB FEC Stats bin
1.3.6.1.4.1.161.19.3.3.1.38ScalarbridgeCbFecStatboutread-onlycurrentBridge CB FEC Stats bout
1.3.6.1.4.1.161.19.3.3.1.39ScalarbridgeCbFecStatbtossread-onlycurrentBridge CB FEC Stats btoss
1.3.6.1.4.1.161.19.3.3.1.40ScalarbridgeCbFecStatbtosscapread-onlycurrentBridge CB FEC Stats btosscap
1.3.6.1.4.1.161.19.3.3.1.41ScalarbridgeCbFecStatuinread-onlycurrentBridge CB FEC Stats uin
1.3.6.1.4.1.161.19.3.3.1.42ScalarbridgeCbFecStatuoutread-onlycurrentBridge CB FEC Stats uout
1.3.6.1.4.1.161.19.3.3.1.43ScalarbridgeCbFecStatutossread-onlycurrentBridge CB FEC Stats utoss
1.3.6.1.4.1.161.19.3.3.1.44ScalarbridgeCbFecStatutosscapread-onlycurrentBridge CB FEC Stats utosscap
1.3.6.1.4.1.161.19.3.3.1.45ScalarbridgeCbRFStatbinread-onlycurrentBridge CB RF Stats bin
1.3.6.1.4.1.161.19.3.3.1.46ScalarbridgeCbRFStatboutread-onlycurrentBridge CB RF Stats bout
1.3.6.1.4.1.161.19.3.3.1.47ScalarbridgeCbRFStatbtossread-onlycurrentBridge CB RF Stats btoss
1.3.6.1.4.1.161.19.3.3.1.48ScalarbridgeCbRFStatbtosscapread-onlycurrentBridge CB RF Stats btosscap
1.3.6.1.4.1.161.19.3.3.1.49ScalarbridgeCbRFStatuinread-onlycurrentBridge CB RF Stats uin
1.3.6.1.4.1.161.19.3.3.1.50ScalarbridgeCbRFStatuoutread-onlycurrentBridge CB RF Stats uout
1.3.6.1.4.1.161.19.3.3.1.51ScalarbridgeCbRFStatutossread-onlycurrentBridge CB RF Stats utoss
1.3.6.1.4.1.161.19.3.3.1.52ScalarbridgeCbRFStatutosscapread-onlycurrentBridge CB RF Stats utosscap
1.3.6.1.4.1.161.19.3.3.1.53ScalarbridgeCbErrStatNI1QSendread-onlycurrentBridge CB Error Stats ErrNI1QSend
1.3.6.1.4.1.161.19.3.3.1.54ScalarbridgeCbErrStatNI2QSendread-onlycurrentBridge CB Error Stats ErrNI2QSend
1.3.6.1.4.1.161.19.3.3.1.55ScalarbridgeCbErrStatBridgeFullread-onlycurrentBridge CB Error Stats BridgeFull
1.3.6.1.4.1.161.19.3.3.1.56ScalarbridgeCbErrStatSendMsgread-onlycurrentBridge CB Error Stats SendMsg
1.3.6.1.4.1.161.19.3.3.1.57ScalarbridgeCbErrStatAPFecQSendread-onlycurrentBridge CB Error Stats APFecQSend
1.3.6.1.4.1.161.19.3.3.1.58ScalarbridgeCbErrStatApRfQSendread-onlycurrentBridge CB Error Stats ApRfQSend
1.3.6.1.4.1.161.19.3.3.1.59ScalarrfStatXmtUDataCntread-onlycurrentRF Scheduler Stats Transmit Unicast Data Count
1.3.6.1.4.1.161.19.3.3.1.60ScalarrfStatXmtBDataCntread-onlycurrentRF Scheduler Stats Transmit Broadcast Data Count
1.3.6.1.4.1.161.19.3.3.1.61ScalarrfStatRcvUDataCntread-onlycurrentRF Scheduler Stats Receive Unicast Data Count
1.3.6.1.4.1.161.19.3.3.1.62ScalarrfStatRcvBDataCntread-onlycurrentRF Scheduler Stats Receive Broadcast Data Count
1.3.6.1.4.1.161.19.3.3.1.63ScalarrfStatXmtCntlCntread-onlycurrentRF Scheduler Stats Transmit Control Count
1.3.6.1.4.1.161.19.3.3.1.64ScalarrfStatRcvCntlCntread-onlycurrentRF Scheduler Stats Receive Control Count
1.3.6.1.4.1.161.19.3.3.1.65ScalarrfStatInSyncCountread-onlycurrentRF Scheduler Stats In Sync Count
1.3.6.1.4.1.161.19.3.3.1.66ScalarrfStatOutSyncCountread-onlycurrentRF Scheduler Stats Out Sync Count
1.3.6.1.4.1.161.19.3.3.1.67ScalarrfStatOverrunCountread-onlycurrentRF Scheduler Stats Overrun Count
1.3.6.1.4.1.161.19.3.3.1.68ScalarrfStatUnderrunCountread-onlycurrentRF Scheduler Stats Underrun Count
1.3.6.1.4.1.161.19.3.3.1.69ScalarrfStatRcvCorruptDataCountread-onlycurrentRF Scheduler Stats Receive Corrupt Data Count
1.3.6.1.4.1.161.19.3.3.1.70ScalarrfStatBadBcastCtlCntread-onlycurrentRF Scheduler Stats Bad Broadcast Control Count
1.3.6.1.4.1.161.19.3.3.1.71ScalarrfStatPLLOutOfLockCntread-onlycurrentRF Scheduler Stats PLL Out of Lock Count
1.3.6.1.4.1.161.19.3.3.1.72ScalarrfStatBeaconVerMismatchCntread-onlycurrentRF Scheduler Stats Beacon version Mismatch Count
1.3.6.1.4.1.161.19.3.3.1.73ScalarrfStatBadFreqBcnRcvCntread-onlycurrentRF Scheduler Stats Wrong Frequency Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.74ScalarrfStatnonLiteBcnRcvCntread-onlycurrentRF Scheduler Stats Non Lite Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.75ScalarrfStatUnsupFeatBcnRcvCntread-onlycurrentRF Scheduler Stats Unsupported Feature Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.76ScalarrfStatUnkwnFeatBcnRcvCntread-onlycurrentRF Scheduler Stats Unknown Feature Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.77ScalarrfStatTxCalFailCntread-onlycurrentRF Scheduler Stats TX Calibration Failures Count
1.3.6.1.4.1.161.19.3.3.1.78ScalarrfStatBadInSyncIDRcvread-onlycurrentRF Scheduler Stats Bad In Sync ID Received Count
1.3.6.1.4.1.161.19.3.3.1.79ScalarrfStatTempOutOfRangeread-onlycurrentRF Scheduler Stats Temperature Out of Range Count
1.3.6.1.4.1.161.19.3.3.1.80ScalarrfStatRSSIOutOfRangeread-onlycurrentRF Scheduler Stats RSSI Out of Range Count
1.3.6.1.4.1.161.19.3.3.1.81ScalarrfStatRangeCapEnfread-onlycurrentRF Scheduler Stats Range Cap Enforced Count
1.3.6.1.4.1.161.19.3.3.1.82ScalarrfStatRcvLTStartread-onlycurrentRF Scheduler Stats Rcv LT Start Count
1.3.6.1.4.1.161.19.3.3.1.83ScalarrfStatRcvLTStartHSread-onlycurrentRF Scheduler Stats Rcv LT Start HS Count
1.3.6.1.4.1.161.19.3.3.1.84ScalarrfStatRcvLTResultread-onlycurrentRF Scheduler Stats Rcv LT Result Count
1.3.6.1.4.1.161.19.3.3.1.85ScalarrfStatXmtLTResultread-onlycurrentRF Scheduler Stats Xmt LT Result Count
1.3.6.1.4.1.161.19.3.3.1.86ScalarwhispFeatureKeyOriginread-onlycurrentOrigin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)
1.3.6.1.4.1.161.19.3.3.1.87ScalarradioMSNread-onlycurrentMSN of the radio.
1.3.6.1.4.1.161.19.3.3.1.88ScalarupdateStatusread-onlycurrentCurrent Status of Device Update
1.3.6.1.4.1.161.19.3.3.1.89ScalarsyslogStatTxSuccessesread-onlycurrentThe count of Syslog messages sent to UDP layer.
1.3.6.1.4.1.161.19.3.3.1.90ScalarsyslogStatDroppedread-onlycurrentNumber of dropped syslog messages due to device overload and/or resource limitations.
1.3.6.1.4.1.161.19.3.3.1.91ScalarfecStatLinkLostread-onlycurrentEthernet link lost count
1.3.6.1.4.1.161.19.3.3.1.92ScalarfecStatLinkDetectedread-onlycurrentEthernet link detected count
1.3.6.1.4.1.161.19.3.3.1.93ScalarnatDhcpStatusread-onlycurrentDisplay NAT Public interface current DHPC status.
1.3.6.1.4.1.161.19.3.3.1.94ScalarfecInDiscardsCountread-onlycurrentEthernet in discards count.
1.3.6.1.4.1.161.19.3.3.1.95ScalarfecInErrorsCountread-onlycurrentEthernet in errors count.
1.3.6.1.4.1.161.19.3.3.1.96ScalarfecOutDiscardsCountread-onlycurrentEthernet out discards count.
1.3.6.1.4.1.161.19.3.3.1.97ScalarfecOutErrorsCountread-onlycurrentEthernet out errors count.
1.3.6.1.4.1.161.19.3.3.1.98ScalarrfInDiscardsCountread-onlydeprecatedRF in discards count. This attribute is deprecated. Use rfInDiscardsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.99ScalarrfInErrorsCountread-onlydeprecatedRF in errors count. This attribute is deprecated. Use rfInErrorsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.100ScalarrfOutDiscardsCountread-onlydeprecatedRF out discards count. This attribute is deprecated. Use rfOutDiscardsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.101ScalarrfOutErrorsCountread-onlydeprecatedRF out errors count. This attribute is deprecated. Use rfOutErrorsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.102ScalarfecInDiscardsOverloadCountread-onlycurrentEthernet in discards overload.
1.3.6.1.4.1.161.19.3.3.1.103ScalarfecOutDiscardsOverloadCountread-onlycurrentEthernet out discards overload.
1.3.6.1.4.1.161.19.3.3.1.104ScalarrfInDiscardsOverloadCountread-onlycurrentRf in discards overload.
1.3.6.1.4.1.161.19.3.3.1.105ScalarrfOutDiscardsOverloadCountread-onlycurrentRf out discards overload.
1.3.6.1.4.1.161.19.3.3.1.106ScalarfpgaCompileInforead-onlycurrentDisplay the fpga compiled attributes. (Engineering Only)
1.3.6.1.4.1.161.19.3.3.1.107ScalarfpgaBuildDateread-onlycurrentDisplay the entire fpga build date string. (Engineering Only)
1.3.6.1.4.1.161.19.3.3.1.108ScalaraggregateBandwidthCapread-onlycurrentThe maximum aggregate (uplink + downlink) the radio is capable of.
1.3.6.1.4.1.161.19.3.3.1.109ScalarcalibrationStatusBoolread-onlycurrentBoolean OID to show if device is calibrated. Applicable to FSK and MIMO radios only.
1.3.6.1.4.1.161.19.3.3.1.110ScalarcalibrationStatusBoxread-onlycurrentString to show if radio is calibrated. Applicable to FSK and MIMO radios only.
1.3.6.1.4.1.161.19.3.3.1.111ScalarradioEngKeyedread-onlycurrentThis will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied.
1.3.6.1.4.1.161.19.3.3.1.112ScalarbridgeCbFecStatfloodsread-onlycurrentBridge CB FEC Stats Floods (Multipoint AP only)
1.3.6.1.4.1.161.19.3.3.1.113ScalarbridgeCbRFStatfloodsread-onlycurrentBridge CB RF Stats Floods (Multipoint AP only)
1.3.6.1.4.1.161.19.3.3.1.114ScalarcatalinaGainRxCH1read-onlycurrentRcv Gain on Catalina Rx CH1. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.115ScalarcatalinaGainRxCH2read-onlycurrentRcv Gain on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.116ScalarantTyperead-onlycurrentIndicates whether the antenna is integrated or external (connectorized).
1.3.6.1.4.1.161.19.3.3.1.117ScalarrfStatRcvCorruptControlCountread-onlycurrentRF Scheduler Stats Receive Corrupt Control Data Count
1.3.6.1.4.1.161.19.3.3.1.118ScalarnumLBTDetectionsread-onlycurrentNumber of LBT Detections since last boot.
1.3.6.1.4.1.161.19.3.3.1.119ScalarbridgeCbEthAuxStatbinread-onlycurrentBridge CB Eth Aux Stats bin
1.3.6.1.4.1.161.19.3.3.1.120ScalarbridgeCbEthAuxStatboutread-onlycurrentBridge CB Eth Aux Stats bout
1.3.6.1.4.1.161.19.3.3.1.121ScalarcatalinaAttenTxCH1read-onlycurrentAttenuation on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.122ScalarcatalinaAttenTxCH2read-onlycurrentAttenuation on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.123ScalarcatalinaCurrDetSetpointTxCH1read-onlycurrentCurrent Detector Setpoint on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.124ScalarcatalinaCurrDetSetpointTxCH2read-onlycurrentCurrent Detector Setpoint on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.125ScalarcatalinaCurrDetReadRefTxCH1read-onlycurrentCurrent Detector Reference on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.126ScalarcatalinaCurrDetReadRefTxCH2read-onlycurrentCurrent Detector Reference on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.127ScalarcatalinaCurrDetReadPowerOnTxCH1read-onlycurrentCurrent Detector PowerOn on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.128ScalarcatalinaCurrDetReadPowerOnTxCH2read-onlycurrentCurrent Detector PowerOn on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.129ScalarcatalinaOpenLoopAttenTxCH1read-onlycurrentOpen Loop Attenuation on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.130ScalarcatalinaOpenLoopAttenTxCH2read-onlycurrentOpen Loop Attenuation on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.131ScalarcatalinaTargetDetSetpointTxCH1read-onlycurrentTarget Detector Setpoint on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.132ScalarcatalinaTargetDetSetpointTxCH2read-onlycurrentTarget Detector Setpoint on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.133ScalarcatalinaGainReductionRxCH1read-onlycurrentGain Reduction on Catalina Rx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.134ScalarcatalinaGainReductionRxCH2read-onlycurrentGain Reduction on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.135ScalarcatalinaLoAttenRxCH1read-onlycurrentLo Attenuation on Catalina Rx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.136ScalarcatalinaLoAttenRxCH2read-onlycurrentLo Attenuation on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.137ScalarcatalinaTargetGainRxCH1read-onlycurrentTarget Gain on Catalina Rx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.138ScalarcatalinaTargetGainRxCH2read-onlycurrentTarget Gain on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.139ScalarbridgeCbEthAuxStatfloodsread-onlycurrentBridge CB Eth Aux Stats Floods (Multipoint AP only)
1.3.6.1.4.1.161.19.3.3.1.141ScalarbridgeCbEthAuxStatbtossread-onlycurrentBridge CB Eth Aux Stats btoss
1.3.6.1.4.1.161.19.3.3.1.142ScalarbridgeCbEthAuxStatbtosscapread-onlycurrentBridge CB Eth Aux Stats btosscap
1.3.6.1.4.1.161.19.3.3.1.143ScalarbridgeCbEthAuxStatuinread-onlycurrentBridge CB Eth Aux Stats uin
1.3.6.1.4.1.161.19.3.3.1.144ScalarbridgeCbEthAuxStatuoutread-onlycurrentBridge CB Eth Aux Stats uout
1.3.6.1.4.1.161.19.3.3.1.145ScalarbridgeCbEthAuxStatutossread-onlycurrentBridge CB Eth Aux Stats utoss
1.3.6.1.4.1.161.19.3.3.1.146ScalarbridgeCbEthAuxStatutosscapread-onlycurrentBridge CB Eth Aux Stats utosscap
1.3.6.1.4.1.161.19.3.3.1.147ScalarradioWatchDogLoggedread-onlycurrentThis will be set either as 0 if there is no watchdog event logged or 1 if there is.
1.3.6.1.4.1.161.19.3.3.1.148ScalarradioFatalErrorLoggedread-onlycurrentThis will be set either as 0 if there is no fatalerror event logged or 1 if there is.
1.3.6.1.4.1.161.19.3.3.1.149ScalarfecStatLinkUptimeread-onlycurrentUptime of main ethernet link in seconds
1.3.6.1.4.1.161.19.3.3.1.150ScalarfecAuxStatLinkUptimeread-onlycurrentUptime of main ethernet link in seconds
1.3.6.1.4.1.161.19.3.3.1.217ScalarrfStatXmtMDataCntread-onlycurrentRF Scheduler Stats Transmit Multicast Data Count
1.3.6.1.4.1.161.19.3.3.1.218ScalarrfStatRcvMDataCntread-onlycurrentRF Scheduler Stats Receive Multicast Data Count
1.3.6.1.4.1.161.19.3.3.1.219ScalarfecStatUnderSizedTossread-onlycurrentUndersized Toss Count
1.3.6.1.4.1.161.19.3.3.1.220ScalarfecRxBabErrread-onlycurrentError count in Babble Receiver.
1.3.6.1.4.1.161.19.3.3.1.221ScalarfecTxHbErrread-onlycurrentNumber of packets having Transmit heartbeat error.
1.3.6.1.4.1.161.19.3.3.1.222ScalarfecEthBusErrread-onlycurrentEthernet Busy Error Count
1.3.6.1.4.1.161.19.3.3.1.223ScalarfecCRCErrorread-onlycurrentNumber of packets having CRC Error.
1.3.6.1.4.1.161.19.3.3.1.224ScalarfecRxFifoNoBufread-onlycurrentNumber of times could not get a buffer from Rx Fifo.
1.3.6.1.4.1.161.19.3.3.1.225ScalarfecRxOverrunread-onlycurrentNumber of times Rx Fifo Overrun.
1.3.6.1.4.1.161.19.3.3.1.226ScalarfecLateCollisionread-onlycurrentNumber of packets having late collision.
1.3.6.1.4.1.161.19.3.3.1.227ScalarfecRetransLimitExpread-onlycurrentNumber of packets whose retransmision limit expired.
1.3.6.1.4.1.161.19.3.3.1.228ScalarfecTxUnderrunread-onlycurrentNumber of times Tx queue underrun.
1.3.6.1.4.1.161.19.3.3.1.229ScalarfecCarSenseLostread-onlycurrentCarrier Sense Lost count.
1.3.6.1.4.1.161.19.3.3.1.230ScalarfecNoCarrierread-onlycurrentNo carrier asserted by external transceiver during transmission.
1.3.6.1.4.1.161.19.3.3.1.231ScalarframePeriodCurrentread-onlycurrentCurrent frame period of the radio.
1.3.6.1.4.1.161.19.3.3.1.232ScalaractiveTxPowerStrread-onlycurrentCurrent transmit power level, including potential power backoff information. Not applicable to PMP 450m.
1.3.6.1.4.1.161.19.3.3.1.233ScalaractiveTxPowerHdthsread-onlycurrentCurrent transmit power level, in hundredths of dBm. Not appliable on PMP 450m.
1.3.6.1.4.1.161.19.3.3.1.234ScalarpoeT2Statusread-onlycurrentIndicates the 802.3at Type 2 Classification status. This is only available on the 450i.
1.3.6.1.4.1.161.19.3.3.1.235ScalarfecAuxStatLinkDetectedread-onlycurrent450i Aux Ethernet link detected count
1.3.6.1.4.1.161.19.3.3.1.236ScalarfecAuxStatLinkLostread-onlycurrent450i Aux Ethernet ink lost count
1.3.6.1.4.1.161.19.3.3.1.237ScalarfecAuxInDiscardsCountread-onlycurrent450i Aux Ethernet in discards count.
1.3.6.1.4.1.161.19.3.3.1.238ScalarfecAuxInErrorsCountread-onlycurrent450i Aux Ethernet in errors count.
1.3.6.1.4.1.161.19.3.3.1.239ScalarfecAuxOutDiscardsCountread-onlycurrent450i Aux Ethernet out discards count.
1.3.6.1.4.1.161.19.3.3.1.240ScalarfecAuxOutErrorsCountread-onlycurrent450i Aux Ethernet out errors count.
1.3.6.1.4.1.161.19.3.3.1.241ScalarfecAuxCRCErrorread-onlycurrent450i Aux Ethernet Number of packets having CRC Error.
1.3.6.1.4.1.161.19.3.3.1.242ScalarfecAuxRxOverrunread-onlycurrent450i Aux Ethernet Number of times Rx Fifo Overrun.
1.3.6.1.4.1.161.19.3.3.1.243ScalarfecAuxLateCollisionread-onlycurrent450i Aux Ethernet Number of packets having late collision.
1.3.6.1.4.1.161.19.3.3.1.244ScalarfecAuxRetransLimitExpread-onlycurrent450i Aux Ethernet Number of packets whose retransmision limit expired.
1.3.6.1.4.1.161.19.3.3.1.245ScalarfecAuxTxUnderrunread-onlycurrent450i Aux Ethernet Number of times Tx queue underrun.
1.3.6.1.4.1.161.19.3.3.1.246ScalarfecAuxCarSenseLostread-onlycurrent450i Aux Ethernet Carrier Sense Lost count.
1.3.6.1.4.1.161.19.3.3.1.247ScalarfecAuxNoCarrierread-onlycurrent450i Aux Ethernet No carrier asserted by external transceiver during transmission.
1.3.6.1.4.1.161.19.3.3.1.248ScalarfecAuxLargeFrameread-onlycurrent450i Aux Ethernet Large Frame Error.
1.3.6.1.4.1.161.19.3.3.1.249ScalarfecAuxRuntFrameread-onlycurrent450i Aux Ethernet Runt Frame Error.
1.3.6.1.4.1.161.19.3.3.1.250ScalarfecLargeFrameread-onlycurrentLarge Frame Error.
1.3.6.1.4.1.161.19.3.3.1.251ScalarfecRuntFrameread-onlycurrentRunt Frame Error.
1.3.6.1.4.1.161.19.3.3.1.252ScalarsoundingStatClearread-writecurrentSounding Stat Clear Set to any value to clear all Sounding Stats
1.3.6.1.4.1.161.19.3.3.1.253ScalarsoundingStatRequestCountread-onlycurrentSounding Stats Request Count
1.3.6.1.4.1.161.19.3.3.1.254ScalarsoundingStatResponseCountread-onlycurrentSounding Stats Response Count
1.3.6.1.4.1.161.19.3.3.1.255ScalarsoundingStatRequestsIgnoredread-onlycurrentSounding Stats Requests Ignored
1.3.6.1.4.1.161.19.3.3.1.256ScalarsoundingStatAvgRequestIntervalread-onlycurrentSounding Stats Avg Request Interval (ms)
1.3.6.1.4.1.161.19.3.3.1.257ScalarsoundingStatMaxRequestIntervalread-onlycurrentSounding Stats Max Request Interval (ms)
1.3.6.1.4.1.161.19.3.3.1.258ScalarsoundingStatErrorCountread-onlycurrentSounding Stats Error Count
1.3.6.1.4.1.161.19.3.3.1.259ScalarcamAccIDread-onlycurrentCnMaestro Account to which Radio is onboarded.
1.3.6.1.4.1.161.19.3.3.1.260ScalarcnMaestroStatusread-onlycurrentCnMaestro connection status.
1.3.6.1.4.1.161.19.3.3.1.261ScalardaVersionread-onlycurrentDevice Agent Version number.
1.3.6.1.4.1.161.19.3.3.1.262ScalarsoundingStatRequestsDroppedread-onlycurrentSounding Stats Requests Dropped
1.3.6.1.4.1.161.19.3.3.1.263ScalarsoundingStatResponsesSuppressedread-onlycurrentSounding Stats Responses Suppressed
1.3.6.1.4.1.161.19.3.3.1.264ScalarsoundingStatVersionMismatchread-onlycurrentSounding Stats Version Mismatch
1.3.6.1.4.1.161.19.3.3.1.265ScalarhardwareVersionread-onlycurrentRead directly from the resistors on the board is the form Major.Minor (cnMedusa-specific, Engineering Only)
1.3.6.1.4.1.161.19.3.3.1.266ScalarproductTypeNameread-onlycurrentBasic product type, based on board type and factory programming.
1.3.6.1.4.1.161.19.3.3.1.267ScalarradioStatusTransmitControlOverriddenread-onlycurrentTransmit mode control is overridden in config PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.268ScalarradioStatusTrackingFailureread-onlycurrentFeedback tracking loop is out of tolerance - Transmit disabled PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.269ScalarradioStatusSectorWeightsOffread-onlycurrentSector mode weights disabled PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.270ScalarradioStatusRxBeamFormingOffread-onlycurrentRx beamforming disabled PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.271ScalarradioStatusPowerDetectorInactiveread-onlycurrentPower detector control not active PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.272ScalarradioStatusCatQuadCalFailread-onlycurrentCatalina Tx quadrature calibration failure 450 platform only. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.273ScalarnearFieldOperationActiveread-onlycurrentWhen true(1) near field operation is enabled and near field range correction is being applied. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.274ScalarradioStatusAlarmReasonread-onlycurrentReason code associated with the cause of a Radio Status Alarm being triggered. Provide this code to Cambium Networks Support. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.275ScalarradioStatusAlarmread-onlycurrentRadio Status Alarm. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.276ScalarforceReassessmentActiveread-onlycurrentWhen true(1) forced channel assessment is enabled. MU-MIMO only.
1.3.6.1.4.1.161.19.3.3.1.277ScalarfecExcessiveDeferralsread-onlycurrentExcessive Deferrals.
1.3.6.1.4.1.161.19.3.3.1.278ScalarrfInDiscardsCountExtread-onlycurrentExtended RF in discards count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.279ScalarrfInErrorsCountExtread-onlycurrentExtended RF in errors count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.280ScalarrfOutDiscardsCountExtread-onlycurrentExtended RF out discards count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.281ScalarrfOutErrorsCountExtread-onlycurrentExtended RF out errors count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.284ScalarboardModelread-onlycurrentReturns Board model of the device.
1.3.6.1.4.1.161.19.3.3.2NodewhispBoxConfig
1.3.6.1.4.1.161.19.3.3.2.1ScalarlinkNegoSpeedread-writeobsoleteLink negotiation speeds. H10BT F10BT H100BT F100BT Separate the values with comma when doing a set. e.g. H10BT,F10BT,H100BT,F100BT
1.3.6.1.4.1.161.19.3.3.2.2ScalarcolorCoderead-writecurrentColor code.
1.3.6.1.4.1.161.19.3.3.2.3ScalardisplayOnlyAccessread-writeobsoleteThis variable is deprecated.
1.3.6.1.4.1.161.19.3.3.2.4ScalarfullAccessread-writecurrentFull access password.
1.3.6.1.4.1.161.19.3.3.2.5ScalarwebAutoUpdateread-writecurrentWeb page auto update in seconds. 0 means disabled.
1.3.6.1.4.1.161.19.3.3.2.6Scalarpass1Statusread-onlycurrentPassword 1(display only) status.
1.3.6.1.4.1.161.19.3.3.2.7Scalarpass2Statusread-onlycurrentPassword 2(full access) status.
1.3.6.1.4.1.161.19.3.3.2.8ScalarbridgeEntryTimeoutread-writecurrent
1.3.6.1.4.1.161.19.3.3.2.9ScalarsnmpMibPermread-writecurrentRead/Write permission for MIB groups.
1.3.6.1.4.1.161.19.3.3.2.10ScalarbhTimingModeread-writecurrentVariable to switch between Timing Master and Timing Slave. For Backhaul units only.
1.3.6.1.4.1.161.19.3.3.2.11ScalarbhModulationread-writeobsoleteModulation scheme. For Backhaul units only. Only level 4 backhaul can be changed to 20Mbits/Second.
1.3.6.1.4.1.161.19.3.3.2.12ScalarpowerControlread-writecurrentPower control. FSK Only.
1.3.6.1.4.1.161.19.3.3.2.13ScalarextFilterDelayread-writeobsoleteObsoleted. External Filters Delay. For 900MHz FSK radios only.
1.3.6.1.4.1.161.19.3.3.2.14ScalarantennaGainread-writecurrentExternal Antenna Gain. For radios that uses an external antenna or the DFS feature. Not applicable to PMP 450m.
1.3.6.1.4.1.161.19.3.3.2.15Scalareirpread-writecurrentTransmit EIRP of radio. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.2.16ScalardynamicLearningread-writecurrentTo enable VLAN dynamic learning.
1.3.6.1.4.1.161.19.3.3.2.17ScalarmanagementVIDread-writecurrentManagement VLAN VID.
1.3.6.1.4.1.161.19.3.3.2.18ScalaragingTimeoutread-writecurrentAging timeout.
1.3.6.1.4.1.161.19.3.3.2.19ScalarframeTyperead-writecurrentAllow only tagged frame.
1.3.6.1.4.1.161.19.3.3.2.20ScalaraddVlanMemberread-writecurrentWrite-Only OID,Add VLAN number which needs to be added.
1.3.6.1.4.1.161.19.3.3.2.21ScalarremoveVlanMemberread-writecurrentWrite-only OID,Enter VLAN ID which needs to deleted. If Vlan doesnot exist an error will be returned.
1.3.6.1.4.1.161.19.3.3.2.22Scalarschedulingread-writecurrentTo use hardware or software scheduling
1.3.6.1.4.1.161.19.3.3.2.23ScalartransmitterOPread-writecurrentTransmitter output power. This is not available on OFDM SMs. Not applicable for PMP 450m. See EIRP OID.
1.3.6.1.4.1.161.19.3.3.2.24ScalarbridgeEnableread-writecurrentDisable or enable bridging functionality for a BH unit.
1.3.6.1.4.1.161.19.3.3.2.25ScalarfecEnableread-writecurrentDisable or enable FEC error correction functionality for multipoint units.
1.3.6.1.4.1.161.19.3.3.2.26ScalartrapIP1read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap1.
1.3.6.1.4.1.161.19.3.3.2.27ScalartrapIP2read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap2.
1.3.6.1.4.1.161.19.3.3.2.28ScalartrapIP3read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap3.
1.3.6.1.4.1.161.19.3.3.2.29ScalartrapIP4read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap4.
1.3.6.1.4.1.161.19.3.3.2.30ScalartrapIP5read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap5.
1.3.6.1.4.1.161.19.3.3.2.31ScalartrapIP6read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap6.
1.3.6.1.4.1.161.19.3.3.2.32ScalartrapIP7read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap7.
1.3.6.1.4.1.161.19.3.3.2.33ScalartrapIP8read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap8.
1.3.6.1.4.1.161.19.3.3.2.34ScalartrapIP9read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap9.
1.3.6.1.4.1.161.19.3.3.2.35ScalartrapIP10read-writeobsoleteObsoleted. Configure with whispBoxDNS.trap10.
1.3.6.1.4.1.161.19.3.3.2.36ScalarcommStringRWriteread-writecurrentRead/Write Community string. This is a write-only OID.
1.3.6.1.4.1.161.19.3.3.2.37ScalarsubnetMaskread-writecurrentSubnet mask for the management IP 1.
1.3.6.1.4.1.161.19.3.3.2.38ScalarmngtIPread-writecurrentManagement IP address 1.
1.3.6.1.4.1.161.19.3.3.2.39ScalarallowVIDAccessread-writecurrentAllow or disallow local SM management VID access.
1.3.6.1.4.1.161.19.3.3.2.40ScalarsetDefaultPlugread-writecurrentIf enabled parameters are set to Factory Defaults upon default plug mode detection.
1.3.6.1.4.1.161.19.3.3.2.41ScalarhwsCompatibilityread-writeobsoleteIf enable, it ensures 6.0 compatibility with HWS.
1.3.6.1.4.1.161.19.3.3.2.42ScalargpsInputread-writecurrentValues 1, 2, 3 have been deprecated. (0) Generate AP sync signal. (1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync. (2) Depr…
1.3.6.1.4.1.161.19.3.3.2.43Scalarismread-writecurrentEnable ISM on 5.7GHz frequency band radios.
1.3.6.1.4.1.161.19.3.3.2.44ScalarhiPriorityread-writeobsoleteEnable Hi Priority Data Queue on BH radios.
1.3.6.1.4.1.161.19.3.3.2.45ScalaruserNameread-writecurrentUser name.To create read-only user set userMode OID first. Maximum of 4 users can exist in system.
1.3.6.1.4.1.161.19.3.3.2.46ScalaruserPasswordread-writecurrentUser password.To create read-only user set userMode OID first.
1.3.6.1.4.1.161.19.3.3.2.47ScalaruserAccessLevelread-writecurrentUser access level.To create read-only user set userMode OID first. 1=TECH 2=INSTALL 3=ADMIN
1.3.6.1.4.1.161.19.3.3.2.48ScalardeleteUserread-writecurrentUser name to remove.
1.3.6.1.4.1.161.19.3.3.2.49ScalartwoXRateread-writeobsoleteTo enable or disable double rate.
1.3.6.1.4.1.161.19.3.3.2.50ScalarlanDhcpStateread-writecurrentTo enable or disable LAN Interface DHCP feature.
1.3.6.1.4.1.161.19.3.3.2.51ScalarsessionTimeoutread-writecurrentTimer for Telnet, Web and FTP sessions.
1.3.6.1.4.1.161.19.3.3.2.52ScalarvlanMemberSourceread-writecurrentSpecified the VLAN member source to display. 0=configured, 1=active configuration. Note that this OID is internal to SNMP and is not available at the Web Inter…
1.3.6.1.4.1.161.19.3.3.2.53ScalaraddCustomFreqListread-writecurrentAdd Custom Frequencies. The frequencies can be in a variety of units up to KHz. Frequencies can be added in a list separated by commas. Example: 3550, 356000, …
1.3.6.1.4.1.161.19.3.3.2.54ScalarremoveCustomFreqListread-writecurrentRemove Custom Frequencies. The frequencies can be in a variety of units up to KHz. Frequencies can be removed in a list separated by commas. Example: 3550, 356…
1.3.6.1.4.1.161.19.3.3.2.55ScalarallowColocationread-writeobsoleteAllow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters.
1.3.6.1.4.1.161.19.3.3.2.56ScalarchangeUsrPwdread-writecurrentAllow to change the password of a given user of a given user. Usage: userName,password.
1.3.6.1.4.1.161.19.3.3.2.57ScalarmngtIP2read-writecurrentManagement IP address 2.
1.3.6.1.4.1.161.19.3.3.2.58ScalarsubnetMask2read-writecurrentSubnet mask for the management IP 2.
1.3.6.1.4.1.161.19.3.3.2.59ScalarmngtIP3read-writecurrentManagement IP address 3.
1.3.6.1.4.1.161.19.3.3.2.60ScalarsubnetMask3read-writecurrentSubnet mask for the management IP 3.
1.3.6.1.4.1.161.19.3.3.2.61ScalarmngtIP4read-writecurrentManagement IP address 4.
1.3.6.1.4.1.161.19.3.3.2.62ScalarsubnetMask4read-writecurrentSubnet mask for the management IP 4.
1.3.6.1.4.1.161.19.3.3.2.63ScalarmngtIP5read-writecurrentManagement IP address 5.
1.3.6.1.4.1.161.19.3.3.2.64ScalarsubnetMask5read-writecurrentSubnet mask for the management IP 5.
1.3.6.1.4.1.161.19.3.3.2.65ScalarmngtIP6read-writecurrentManagement IP address 6.
1.3.6.1.4.1.161.19.3.3.2.66ScalarsubnetMask6read-writecurrentSubnet mask for the management IP 6.
1.3.6.1.4.1.161.19.3.3.2.67ScalarmngtIP7read-writecurrentManagement IP address 7.
1.3.6.1.4.1.161.19.3.3.2.68ScalarsubnetMask7read-writecurrentSubnet mask for the management IP 7.
1.3.6.1.4.1.161.19.3.3.2.69ScalarmngtIP8read-writecurrentManagement IP address 8.
1.3.6.1.4.1.161.19.3.3.2.70ScalarsubnetMask8read-writecurrentSubnet mask for the management IP 8.
1.3.6.1.4.1.161.19.3.3.2.71ScalarmngtIP9read-writecurrentManagement IP address 9.
1.3.6.1.4.1.161.19.3.3.2.72ScalarsubnetMask9read-writecurrentSubnet mask for the management IP 9.
1.3.6.1.4.1.161.19.3.3.2.73ScalarmngtIP10read-writecurrentManagement IP address 10.
1.3.6.1.4.1.161.19.3.3.2.74ScalarsubnetMask10read-writecurrentSubnet mask for the management IP 10.
1.3.6.1.4.1.161.19.3.3.2.75ScalarbhvlanEnableread-writecurrentTo enable or disable VLAN for Backhaul Master/Slave.
1.3.6.1.4.1.161.19.3.3.2.76ScalarlldpBroadcastEnableread-writecurrentTo enable Broadcast of LLDP message, if disabled LLDP uses multicast
1.3.6.1.4.1.161.19.3.3.2.77ScalarregionCoderead-writedeprecatedSet Region Code for the Unit. Used the individual region[Region] OIDs instead.
1.3.6.1.4.1.161.19.3.3.2.78ScalarrussiaRegionread-writedeprecatedSet Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now.
1.3.6.1.4.1.161.19.3.3.2.79ScalarcommStringROnlyread-writecurrentSet Read Only commnunity string.
1.3.6.1.4.1.161.19.3.3.2.80ScalarethernetLinkSpeedread-writecurrentSet/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds.
1.3.6.1.4.1.161.19.3.3.2.81ScalarcyclicPrefixread-writecurrentCyclic Prefix value, for OFDM Radios only. Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 m…
1.3.6.1.4.1.161.19.3.3.2.82ScalarnumberCustomFreqread-onlycurrentNumber of custom frequencies added. There is a maximum of 100. For use on 3.5 GHz OFDM Radios only.
1.3.6.1.4.1.161.19.3.3.2.83ScalarchannelBandwidthread-onlycurrentThe current channel bandwidth in MHz. For use on OFDM Radios only. Obsoleted for MIMO SMs.
1.3.6.1.4.1.161.19.3.3.2.84ScalarsetDefaultsread-writecurrentSetting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0 will undo Factory Defaults if and only if Factory Defaults ha…
1.3.6.1.4.1.161.19.3.3.2.85ScalarradioRateAdaptread-writecurrentRate adaptation parameter 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) 1: 1x/2x (FSK and SISO OFDM 16-QAM) Following are OFDM only: 2: 1x/2x/3x (SISO OFDM…
1.3.6.1.4.1.161.19.3.3.2.86ScalarsiteInfoViewableread-writecurrentEnable non login users the ability to view Site Information
1.3.6.1.4.1.161.19.3.3.2.87ScalarlargeVCQread-writecurrentEnable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed.
1.3.6.1.4.1.161.19.3.3.2.88Scalarlatituderead-writecurrentThe latitude setting of this unit in decimal degrees.
1.3.6.1.4.1.161.19.3.3.2.89Scalarlongituderead-writecurrentThe longitude setting of this unit in decimal degrees.
1.3.6.1.4.1.161.19.3.3.2.90Scalarheightread-writecurrentThe height setting of this unit in meters.
1.3.6.1.4.1.161.19.3.3.2.91Scalarbandwidthread-writecurrentRadio bandwidth setting. Obsoleted for MIMO SMs. Instead for MIMO SMs use OID bandwidthScan.
1.3.6.1.4.1.161.19.3.3.2.92ScalardataScramblingMethodread-onlyobsoleteThis OID is for OFDM only and is obsolete.
1.3.6.1.4.1.161.19.3.3.2.93ScalarportVIDread-writecurrentBackhaul Port VID (PVID).
1.3.6.1.4.1.161.19.3.3.2.94ScalarradioRateAdaptULread-writecurrentUplink Rate adaptation parameter 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) 1: 1x/2x (FSK and SISO OFDM 16-QAM) Following are OFDM only: 2: 1x/2x/3x (SI…
1.3.6.1.4.1.161.19.3.3.2.95ScalarproviderVIDread-writecurrentProvider VID for QinQ VLAN.
1.3.6.1.4.1.161.19.3.3.2.96Scalarmac1VIDMapAddrread-writecurrentMAC Address for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.97Scalarmac1VIDMapVidread-writecurrentVID for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.98Scalarmac2VIDMapAddrread-writecurrentMAC Address for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.99Scalarmac2VIDMapVidread-writecurrentVID for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.100Scalarmac3VIDMapAddrread-writecurrentMAC Address for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.101Scalarmac3VIDMapVidread-writecurrentVID for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.102Scalarmac4VIDMapAddrread-writecurrentMAC Address for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.103Scalarmac4VIDMapVidread-writecurrentVID for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.104Scalarmac5VIDMapAddrread-writecurrentMAC Address for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.105Scalarmac5VIDMapVidread-writecurrentVID for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.106Scalarmac6VIDMapAddrread-writecurrentMAC Address for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.107Scalarmac6VIDMapVidread-writecurrentVID for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.108Scalarmac7VIDMapAddrread-writecurrentMAC Address for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.109Scalarmac7VIDMapVidread-writecurrentVID for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.110Scalarmac8VIDMapAddrread-writecurrentMAC Address for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.111Scalarmac8VIDMapVidread-writecurrentVID for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.112Scalarmac9VIDMapAddrread-writecurrentMAC Address for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.113Scalarmac9VIDMapVidread-writecurrentVID for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.114Scalarmac10VIDMapAddrread-writecurrentMAC Address for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.115Scalarmac10VIDMapVidread-writecurrentVID for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.116ScalarvlanPortTyperead-writecurrentVLAN Port Type for VLAN interface. Default is Q.
1.3.6.1.4.1.161.19.3.3.2.117ScalarvlanAcceptQinQFramesread-writecurrentAllow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP.
1.3.6.1.4.1.161.19.3.3.2.118ScalarwhispWebUserAccessModeread-writecurrentThis variable selects if web page users for the radio should be authenticated locally or via a centralised remote Radius server
1.3.6.1.4.1.161.19.3.3.2.119ScalarusrAccountEnableAccountingread-writecurrentSelect the level of accounting information to be reported to the server
1.3.6.1.4.1.161.19.3.3.2.120ScalarallowRejectThenLocalread-writecurrentControl for allowing local authenication if the AAA remote server
1.3.6.1.4.1.161.19.3.3.2.121ScalarsnrCalculationread-writedeprecatedThis OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance.
1.3.6.1.4.1.161.19.3.3.2.122ScalarpriorityPrecedenceread-writecurrentAllows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions.
1.3.6.1.4.1.161.19.3.3.2.123ScalarinstallationColorCoderead-writecurrentInstallation Color Code. Allows non-configured SMs to register to an AP with UCC enabled in order to facilitate remote provisioning.
1.3.6.1.4.1.161.19.3.3.2.124ScalarapSmModeread-writecurrentSet AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP. Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to A…
1.3.6.1.4.1.161.19.3.3.2.125ScalarpppoeFilterread-writecurrentTo set PPPoE packet filter.
1.3.6.1.4.1.161.19.3.3.2.126ScalarsmbFilterread-writecurrentTo set SMB packet filter.
1.3.6.1.4.1.161.19.3.3.2.127ScalarsnmpFilterread-writecurrentTo set SNMP packet filter.
1.3.6.1.4.1.161.19.3.3.2.128ScalaruserP1Filterread-writecurrentTo set user defined port 1 packet filter.
1.3.6.1.4.1.161.19.3.3.2.129ScalaruserP2Filterread-writecurrentTo set user defined port 2 packet filter.
1.3.6.1.4.1.161.19.3.3.2.130ScalaruserP3Filterread-writecurrentTo set user defined port 3 packet filter.
1.3.6.1.4.1.161.19.3.3.2.131ScalarallOtherIpFilterread-writecurrentTo set all other IPv4 packet filter.
1.3.6.1.4.1.161.19.3.3.2.132ScalarallIpv4Filterread-writecurrentTo set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All O…
1.3.6.1.4.1.161.19.3.3.2.133ScalararpFilterread-writecurrentTo set ARP packet filter.
1.3.6.1.4.1.161.19.3.3.2.134ScalarallOthersFilterread-writecurrentTo set all other packet filter when.
1.3.6.1.4.1.161.19.3.3.2.135ScalaruserDefinedPort1read-writecurrentAn integer value of number one user defined port. Range:0-65535
1.3.6.1.4.1.161.19.3.3.2.136Scalarport1TCPFilterread-writecurrentTo set user defined port 1 TCP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.137Scalarport1UDPFilterread-writecurrentTo set user defined port 1 UDP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.138ScalaruserDefinedPort2read-writecurrentAn integer value of number two user defined port. Range:0-65535
1.3.6.1.4.1.161.19.3.3.2.139Scalarport2TCPFilterread-writecurrentTo set user defined port 2 TCP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.140Scalarport2UDPFilterread-writecurrentTo set user defined port 2 UDP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.141ScalaruserDefinedPort3read-writecurrentAn integer value of number three user defined port. Range:0-65535
1.3.6.1.4.1.161.19.3.3.2.142Scalarport3TCPFilterread-writecurrentTo set user defined port 3 TCP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.143Scalarport3UDPFilterread-writecurrentTo set user defined port 3 UDP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.144ScalarbootpcFilterread-writecurrentTo set bootp client sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.145ScalarbootpsFilterread-writecurrentTo set bootp server sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.146Scalarip4MultFilterread-writecurrentTo set IPv4 MultiCast packets filter when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.147ScalarpacketFilterDirectionread-writecurrentTo set packet filter direction. Upstream is default.
1.3.6.1.4.1.161.19.3.3.2.148ScalarencryptionConfigread-writecurrentFor supported radio, set the encryption algorithm to use. DES by default. Cannot be set if encryption is disabled.
1.3.6.1.4.1.161.19.3.3.2.149ScalarpppoeCtlPriorityread-writecurrentPrioritization of PPPoE Control packets.
1.3.6.1.4.1.161.19.3.3.2.150ScalarftpPortread-writecurrentPort used to for FTP. Default is 21.
1.3.6.1.4.1.161.19.3.3.2.151ScalarhttpPortread-writecurrentPort used to for HTTP. Default is 80.
1.3.6.1.4.1.161.19.3.3.2.152ScalarhttpsPortread-writecurrentPort used to for HTTPs. Default is 443.
1.3.6.1.4.1.161.19.3.3.2.153ScalarsnmpPortread-writecurrentPort used to for SNMP. Default is 161.
1.3.6.1.4.1.161.19.3.3.2.154ScalarsnmpTrapPortread-writecurrentPort used to for SNMP Traps. Default is 162.
1.3.6.1.4.1.161.19.3.3.2.155ScalarwebAccessread-writecurrentThis variable determines if only HTTP or HTTPs connection are allowed. 0: HTTP Only 1: HTTPs Only 2: HTTP and HTTPs Both
1.3.6.1.4.1.161.19.3.3.2.156ScalarsyslogDomainNameAppendread-writecurrentSelect whether to append the configured management domain name to the Syslog server name. For example, if dnsMgmtDomainName is set to 'example.com', syslogServ…
1.3.6.1.4.1.161.19.3.3.2.157ScalarsyslogServerAddrread-writecurrentSyslog server address either in dotted decimal notation or a Fully Qualified Domain Name
1.3.6.1.4.1.161.19.3.3.2.158ScalarsyslogServerPortread-writecurrentListening port on the Syslog server. Default is 514.
1.3.6.1.4.1.161.19.3.3.2.159ScalarsyslogMinLevelread-writecurrentSets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted.
1.3.6.1.4.1.161.19.3.3.2.160ScalarallIpv6Filterread-writecurrentTo set all IPv6 packet filter. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp, IPv6 Mcast, User Defined Ports, and All…
1.3.6.1.4.1.161.19.3.3.2.161Scalaripv6smbFilterread-writecurrentTo set IPv6 SMB packet filter.
1.3.6.1.4.1.161.19.3.3.2.162Scalaripv6snmpFilterread-writecurrentTo set IPv6 SNMP packet filter.
1.3.6.1.4.1.161.19.3.3.2.163Scalaripv6bootpcFilterread-writecurrentTo set IPv6 bootp client sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.164Scalaripv6bootpsFilterread-writecurrentTo set IPv6 bootp server sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.165Scalaripv6MultFilterread-writecurrentTo set IPv6 MultiCast packets filter when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.166ScalarallOtherIpv6Filterread-writecurrentTo set all other IPv6 packet filter.
1.3.6.1.4.1.161.19.3.3.2.167ScalarsnmpStatusread-writecurrentThis variable determines SNMP operation mode. 1: Enable SNMPv2c only 2: Enable SNMPv3 only 3: Enable SNMPv2c and SNMPv3
1.3.6.1.4.1.161.19.3.3.2.168ScalartelnetStatusread-writecurrentThis variable determines if Telnet to enabled or not. 0: Disable Telnet 1: Enable Telnet
1.3.6.1.4.1.161.19.3.3.2.169ScalarftpStatusread-writecurrentThis variable determines if FTP to enabled or not. 0: Disable FTP 1: Enable FTP
1.3.6.1.4.1.161.19.3.3.2.170ScalartftpStatusread-writecurrentThis variable determines if TFTP is enabled or not. 0: Disable TFTP 1: Enable TFTP
1.3.6.1.4.1.161.19.3.3.2.171ScalaruserModeread-writecurrentUser Mode 1=Read-Only 0=Read-Write(default).
1.3.6.1.4.1.161.19.3.3.2.172ScalartcpAckPriorityread-writecurrentPrioritize TCP ACK that are 64 bytes or less.
1.3.6.1.4.1.161.19.3.3.2.173ScalarcodePointSelectread-writecurrentCodepoint Select.This represents the CodePoint Selection to be modified via Priority Select
1.3.6.1.4.1.161.19.3.3.2.174ScalarprioritySelectread-writecurrentPriority Select.The priority setting input for the CodePoint selected in CodePoint Select.
1.3.6.1.4.1.161.19.3.3.2.175ScalarauxPortEnableread-writecurrentEnable(1) or Disable(0) aux ethernet port on 450i radio
1.3.6.1.4.1.161.19.3.3.2.176ScalarpoeAuxEnableread-writecurrentEnable(1) or Disable(0) aux ethernet port PoE on 450i radio
1.3.6.1.4.1.161.19.3.3.2.177ScalarwhispUsrAuthread-writecurrentSelect method for User Authentication.
1.3.6.1.4.1.161.19.3.3.2.201Scalarlan1DhcpReleaseread-writecurrentSetting the variable to '1' will release LAN1's IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.202Scalarlan1DhcpRenewread-writecurrentSetting the variable to '1' will renew LAN1's lease time for its current IP address. Applicable only when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.203Scalarlan3DhcpReleaseread-writecurrentSetting the variable to '1' will release LAN3's (RF Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.204Scalarlan3DhcpRenewread-writecurrentSetting the variable to '1' will renew LAN3's (RF Public) lease time for its current IP address. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.205ScalarnatDhcpReleaseread-writecurrentSetting the variable to '1' will release WAN's (NAT Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.206ScalarnatDhcpRenewread-writecurrentSetting the variable to '1' will renew WAN's (NAT Public) lease time for its current IP address. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.207Scalarregionread-onlycurrentSet Region Code for the Unit.
1.3.6.1.4.1.161.19.3.3.2.208ScalarregionAsiaread-writecurrentCountry Code for Asia.
1.3.6.1.4.1.161.19.3.3.2.209ScalarregionEuroperead-writecurrentCountry Code for Europe. Other is only available for units with EU Region Lock.
1.3.6.1.4.1.161.19.3.3.2.210ScalarregionNorthAmericaread-writecurrentCountry Code for North America.
1.3.6.1.4.1.161.19.3.3.2.211ScalarregionOceaniaread-writecurrentCountry Code for Oceania.
1.3.6.1.4.1.161.19.3.3.2.212ScalarregionSouthAmericaread-writecurrentCountry Code for South America.
1.3.6.1.4.1.161.19.3.3.2.213ScalarregionOtherRegulatoryread-writecurrentRegulatory setting for governing regulatory body.
1.3.6.1.4.1.161.19.3.3.2.214Scalarinterleaveread-writecurrentEngineering use only.
1.3.6.1.4.1.161.19.3.3.2.215ScalarreceiveQualityDebugread-writecurrentEnable or disable receive quality calculations for every packet. Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will s…
1.3.6.1.4.1.161.19.3.3.2.216ScalarapTyperead-writecurrentIn standard mode, all possible sync sources will be made availble and usedfor autoSync operation. In remote mode, sync over power port will not be available as…
1.3.6.1.4.1.161.19.3.3.2.217ScalarregionAfricaread-writecurrentCountry Code for Africa.
1.3.6.1.4.1.161.19.3.3.2.218ScalaraddCustomFreqMimoread-writecurrentFrequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'.
1.3.6.1.4.1.161.19.3.3.2.219ScalarremoveCustomFreqMimoread-writecurrentFrequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'.
1.3.6.1.4.1.161.19.3.3.2.220ScalartimedSpectrumAnalysisDurationBoxread-writecurrentValue in seconds for a timed spectrum analysis. Range is 10-1000 seconds.
1.3.6.1.4.1.161.19.3.3.2.221ScalarspectrumAnalysisActionBoxread-writecurrentStart or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis Note: AP/BHM will ru…
1.3.6.1.4.1.161.19.3.3.2.222Scalarmac1VIDMapPriorityread-writecurrentVID priority for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.223Scalarmac1VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.224Scalarmac2VIDMapPriorityread-writecurrentVID priority for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.225Scalarmac2VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.226Scalarmac3VIDMapPriorityread-writecurrentVID priority for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.227Scalarmac3VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.228Scalarmac4VIDMapPriorityread-writecurrentVID priority for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.229Scalarmac4VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.230Scalarmac5VIDMapPriorityread-writecurrentVID priority for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.231Scalarmac5VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.232Scalarmac6VIDMapPriorityread-writecurrentVID priority for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.233Scalarmac6VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.234Scalarmac7VIDMapPriorityread-writecurrentVID priority for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.235Scalarmac7VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.236Scalarmac8VIDMapPriorityread-writecurrentVID priority for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.237Scalarmac8VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.238Scalarmac9VIDMapPriorityread-writecurrentVID priority for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.239Scalarmac9VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.240Scalarmac10VIDMapPriorityread-writecurrentVID priority for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.241Scalarmac10VIDMapPriorityModeread-writecurrentVID priority Mode for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.242ScalarmanagementVIDPriorityread-writecurrentmanagement VID VID VLAN Priority.
1.3.6.1.4.1.161.19.3.3.2.243ScalarmanagementVIDPriorityModeread-writecurrentmanagement VID VLAN Priority Mode.
1.3.6.1.4.1.161.19.3.3.2.244ScalarremarkSrcVIDread-writecurrentSource VID to apply remarking on.
1.3.6.1.4.1.161.19.3.3.2.245ScalaraddRemarkVIDread-writecurrentAdd VLAN ID re-marking entry.
1.3.6.1.4.1.161.19.3.3.2.246ScalaraddRemarkPriorityread-writecurrentAdd 802.1p re-mark entry.
1.3.6.1.4.1.161.19.3.3.2.247ScalardeleteRemarkVIDread-writecurrentRemove the VID re-marking for this source VID.
1.3.6.1.4.1.161.19.3.3.2.248ScalardeleteRemarkPriorityread-writecurrentRemove the priority re-marking for this source VID.
1.3.6.1.4.1.161.19.3.3.2.249ScalarmimoRateAdaptAlgorithmread-writecurrentEngineering use only. Control MIMO Rate Adapt Algorithm 0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput 1 = MIMO-B only 2 = MIMO-…
1.3.6.1.4.1.161.19.3.3.2.250ScalarcontrolMessagesread-writecurrentControl Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO Control Messages is the recommended and default setting. However, …
1.3.6.1.4.1.161.19.3.3.2.251ScalarenableSecurityBannerread-writecurrentShows Security Banner at the time of login
1.3.6.1.4.1.161.19.3.3.2.252ScalarvcDepthread-writecurrentVC Depth of radio. Not applicable with 450m. Engineering use only.
1.3.6.1.4.1.161.19.3.3.2.253ScalartextSecurityBannerread-writecurrentSecurity Banner to be dispalyed on login page. Length should be maximum 1200 characters.Configuration from web UI can enter upto 1499 characters. Only ASCII ch…
1.3.6.1.4.1.161.19.3.3.2.254ScalaracceptSecurityBannerread-writecurrent1: User must accept and acknowledge security banner before login. 0: Accepting security banner is not mandatory and user can login without it.
1.3.6.1.4.1.161.19.3.3.2.255ScalarpoeT2Classificationread-writecurrentWhen disabled, the radio will ignore the 802.3at Type 2 classification. When enabled, if 802.3at Type 2 PoE is not present, the board will start and log the pr…
1.3.6.1.4.1.161.19.3.3.2.256ScalarsimulatedAirDelayread-writecurrentSimulated Air Delay. Engineering use only.
1.3.6.1.4.1.161.19.3.3.2.257ScalarcnMaestroEnableread-writecurrentEnable Remote management using cnMaestro.
1.3.6.1.4.1.161.19.3.3.2.258ScalarcnMaestroUrlread-writecurrentcnMaestro Server URL.
1.3.6.1.4.1.161.19.3.3.2.259ScalarcamIDread-writecurrentCambium Id for cnMaestro onboarding.
1.3.6.1.4.1.161.19.3.3.2.260ScalarcamOnboardKeyread-writecurrentOnboarding key for cnMaestro onboarding.
1.3.6.1.4.1.161.19.3.3.2.261ScalaratexHazlocPowerLimitread-writecurrentIf radio is keyed for ATEX/HazLoc operation, these settings can be used to limit maximum power output, per Gas Group specs.
1.3.6.1.4.1.161.19.3.3.2.262ScalarnearFieldRangeread-writecurrentRange in feet for near field operation. This is applied only when nearFieldOperation is set to enable(1) and eirp is 22dBm or below or when Engineering keyed. …
1.3.6.1.4.1.161.19.3.3.2.263ScalarnearFieldOperationread-writecurrentEnables operation in the near field. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.2.264ScalardefaultIPAccessEnableread-writecurrentEnable(1) or Disable(0) Default alternative LAN1 IP address
1.3.6.1.4.1.161.19.3.3.2.265ScalarpingWdogEnableread-writecurrentenable(1) or disable(0) ping watchdog.
1.3.6.1.4.1.161.19.3.3.2.266ScalarpingWdogIPread-writecurrentIPv4 address to ping in dotted decimal notation.
1.3.6.1.4.1.161.19.3.3.2.267ScalarpingWdogIntervalread-writecurrentIntervals in seconds at which ping should be initiated.
1.3.6.1.4.1.161.19.3.3.2.268ScalarpingWdogRbtCntread-writecurrentPing Failures count at which reboot should be initiated.
1.3.6.1.4.1.161.19.3.3.2.275ScalarforceReassessmentread-writecurrentForces channel reassessment for all registered SMs. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. MU-MIMO only.
1.3.6.1.4.1.161.19.3.3.2.276Scalarenable8023linkBoxread-writecurrentTo enable or disable 802.3 link.
1.3.6.1.4.1.161.19.3.3.2.278ScalarethernetPortSelectionread-writecurrentSet/Get the Ethernet port used to bridge traffic. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.2.279ScalarethernetLinkSpeedSfpread-writecurrentSet/Get Ethernet link speed and duplex settings of the SFP port. PMP 450m only. Please note that the Radio Recovery Console only supports auto1000F for the SFP.
1.3.6.1.4.1.161.19.3.3.3NodewhispBoxControls
1.3.6.1.4.1.161.19.3.3.3.1ScalarsaveFlashread-writeobsoleteThis variable is currently deprecated.
1.3.6.1.4.1.161.19.3.3.3.2Scalarrebootread-writecurrentSetting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. Setting the variable to 2 will perform a …
1.3.6.1.4.1.161.19.3.3.3.3ScalarclearEventLogread-writecurrentSetting the variable to 1 will clear the event log.
1.3.6.1.4.1.161.19.3.3.3.4ScalarrebootIfRequiredread-writecurrentSetting the variable to 1 will reboot the unit if reboot is required.
1.3.6.1.4.1.161.19.3.3.3.5ScalarclearBERStatsread-writecurrentSet to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats' When action is complete.
1.3.6.1.4.1.161.19.3.3.3.6ScalarupdateDeviceread-writecurrentUse to update the software on the device
1.3.6.1.4.1.161.19.3.3.3.7ScalarimportConfigFileread-writecurrentSet to URL to immediately download and apply configuration file
1.3.6.1.4.1.161.19.3.3.3.8ScalarexportConfigFileread-writecurrentSet to URL to immediately export and upload configuration file
1.3.6.1.4.1.161.19.3.3.3.9ScalarundoUnitWideSavedChangesread-writecurrentSetting to 1 will undo unit wide saved changes
1.3.6.1.4.1.161.19.3.3.3.10ScalarresetPoEAuxread-writecurrentSetting to 1 will reset aux ethernet port PoE on 450i radio. Port will be powered off for 2 seconds during the set call, which will delay the SNMP response.
1.3.6.1.4.1.161.19.3.3.4TablewhispBoxBridgeTablenot-accessiblecurrentBridge table.
1.3.6.1.4.1.161.19.3.3.4.1RowwhispBoxBridgeEntrynot-accessiblecurrentBridge entry.
1.3.6.1.4.1.161.19.3.3.4.1.1ColumnwhispBridgeMacAddrread-onlycurrentMAC Address of the registered entity.
1.3.6.1.4.1.161.19.3.3.4.1.2ColumnwhispBridgeDesLuidread-onlycurrentThis is the Local Unit Identifier assigned to Subscriber Modems.
1.3.6.1.4.1.161.19.3.3.4.1.3ColumnwhispBridgeAgeread-onlycurrentTable entry last access age in minutes.
1.3.6.1.4.1.161.19.3.3.4.1.4ColumnwhispBridgeExtread-onlycurrentTimeout extension flag for entries which also reside in the PNA APR cache.
1.3.6.1.4.1.161.19.3.3.4.1.5ColumnwhispBridgeHashread-onlycurrentHash table array index.
1.3.6.1.4.1.161.19.3.3.4.1.6ColumnwhispBridgeCAMread-onlyobsoleteThis entry is deprecated.
1.3.6.1.4.1.161.19.3.3.5NodewhispBoxEventLog
1.3.6.1.4.1.161.19.3.3.5.1ScalarwhispBoxEvntLogread-onlycurrentEvent log for AP and SM.
1.3.6.1.4.1.161.19.3.3.6NodewhispBoxConf
1.3.6.1.4.1.161.19.3.3.6.1NodewhispBoxGroups
1.3.6.1.4.1.161.19.3.3.6.1.1GroupwhispBoxAttributesGroupcurrentCanopy Box Level Attributes group.
1.3.6.1.4.1.161.19.3.3.6.1.2GroupwhispBoxControlGroupcurrentCanopy Box Level control group.
1.3.6.1.4.1.161.19.3.3.6.1.3GroupwhispBoxBTGroupcurrentCanopy Box Bridging Table group.
1.3.6.1.4.1.161.19.3.3.6.1.4GroupwhispBoxVLANTableGroupcurrentCanopy Box VLAN member Table group.
1.3.6.1.4.1.161.19.3.3.6.1.5GroupwhispBoxCPTableGroupcurrentCode Point Table group.
1.3.6.1.4.1.161.19.3.3.6.1.6GroupwhispBoxUserTableGroupcurrentCanopy Box User Information Table group.
1.3.6.1.4.1.161.19.3.3.6.1.7GroupwhispLayer2NeighborTableGroupcurrentCanopy Box Layer 2 Neighbor information.
1.3.6.1.4.1.161.19.3.3.6.1.8GroupwhispBoxNotifGroupcurrentCanopy Box Notification Group.
1.3.6.1.4.1.161.19.3.3.6.1.9GroupwhispBoxVLANRemarkTableGroupcurrentCanopy Box VLAN Remarking Table group.
1.3.6.1.4.1.161.19.3.3.6.1.10GroupwhispBoxSNMPv3GroupcurrentCanopy Box SNMPv3 Group.
1.3.6.1.4.1.161.19.3.3.6.1.11GroupwhispBoxLinkTestGroupcurrentCanopy Box Link Test group.
1.3.6.1.4.1.161.19.3.3.7NodewhispBoxBridgeVar
1.3.6.1.4.1.161.19.3.3.7.1ScalarwhispBridgeTbUsedread-onlycurrentNumber of used entries in bridging table.
1.3.6.1.4.1.161.19.3.3.7.2ScalarwhispBridgeTbFreeread-onlycurrentNumber of free entries in bridging table.
1.3.6.1.4.1.161.19.3.3.7.3ScalarwhispBridgeTbErrread-onlycurrentBridging table errors.
1.3.6.1.4.1.161.19.3.3.8TablewhispVLANTablenot-accessiblecurrentVLAN member table.
1.3.6.1.4.1.161.19.3.3.8.1RowwhispVLANEntrynot-accessiblecurrentVLAN entry.
1.3.6.1.4.1.161.19.3.3.8.1.1ColumnwhispVIDread-onlycurrentVLAN member ID.
1.3.6.1.4.1.161.19.3.3.8.1.2ColumnwhispVTyperead-onlycurrentVLAN member type.
1.3.6.1.4.1.161.19.3.3.8.1.3ColumnwhispVAgeread-onlycurrentVLAN member age.
1.3.6.1.4.1.161.19.3.3.9NodewhispBoxCPVar
1.3.6.1.4.1.161.19.3.3.9.1ScalarcodePoint0read-onlycurrentCode Point 0.
1.3.6.1.4.1.161.19.3.3.9.2ScalarcodePoint1read-writecurrentCode Point 1.
1.3.6.1.4.1.161.19.3.3.9.3ScalarcodePoint2read-writecurrentCode Point 2.
1.3.6.1.4.1.161.19.3.3.9.4ScalarcodePoint3read-writecurrentCode Point 3.
1.3.6.1.4.1.161.19.3.3.9.5ScalarcodePoint4read-writecurrentCode Point 4.
1.3.6.1.4.1.161.19.3.3.9.6ScalarcodePoint5read-writecurrentCode Point 5.
1.3.6.1.4.1.161.19.3.3.9.7ScalarcodePoint6read-writecurrentCode Point 6.
1.3.6.1.4.1.161.19.3.3.9.8ScalarcodePoint7read-writecurrentCode Point 7.
1.3.6.1.4.1.161.19.3.3.9.9ScalarcodePoint8read-writecurrentCode Point 8.
1.3.6.1.4.1.161.19.3.3.9.10ScalarcodePoint9read-writecurrentCode Point 9.
1.3.6.1.4.1.161.19.3.3.9.11ScalarcodePoint10read-writecurrentCode Point 10.
1.3.6.1.4.1.161.19.3.3.9.12ScalarcodePoint11read-writecurrentCode Point 11.
1.3.6.1.4.1.161.19.3.3.9.13ScalarcodePoint12read-writecurrentCode Point 12.
1.3.6.1.4.1.161.19.3.3.9.14ScalarcodePoint13read-writecurrentCode Point 13.
1.3.6.1.4.1.161.19.3.3.9.15ScalarcodePoint14read-writecurrentCode Point 14.
1.3.6.1.4.1.161.19.3.3.9.16ScalarcodePoint15read-writecurrentCode Point 15.
1.3.6.1.4.1.161.19.3.3.9.17ScalarcodePoint16read-writecurrentCode Point 16.
1.3.6.1.4.1.161.19.3.3.9.18ScalarcodePoint17read-writecurrentCode Point 17.
1.3.6.1.4.1.161.19.3.3.9.19ScalarcodePoint18read-writecurrentCode Point 18.
1.3.6.1.4.1.161.19.3.3.9.20ScalarcodePoint19read-writecurrentCode Point 19.
1.3.6.1.4.1.161.19.3.3.9.21ScalarcodePoint20read-writecurrentCode Point 20.
1.3.6.1.4.1.161.19.3.3.9.22ScalarcodePoint21read-writecurrentCode Point 21.
1.3.6.1.4.1.161.19.3.3.9.23ScalarcodePoint22read-writecurrentCode Point 22.
1.3.6.1.4.1.161.19.3.3.9.24ScalarcodePoint23read-writecurrentCode Point 23.
1.3.6.1.4.1.161.19.3.3.9.25ScalarcodePoint24read-writecurrentCode Point 24.
1.3.6.1.4.1.161.19.3.3.9.26ScalarcodePoint25read-writecurrentCode Point 25.
1.3.6.1.4.1.161.19.3.3.9.27ScalarcodePoint26read-writecurrentCode Point 26.
1.3.6.1.4.1.161.19.3.3.9.28ScalarcodePoint27read-writecurrentCode Point 27.
1.3.6.1.4.1.161.19.3.3.9.29ScalarcodePoint28read-writecurrentCode Point 28.
1.3.6.1.4.1.161.19.3.3.9.30ScalarcodePoint29read-writecurrentCode Point 29.
1.3.6.1.4.1.161.19.3.3.9.31ScalarcodePoint30read-writecurrentCode Point 30.
1.3.6.1.4.1.161.19.3.3.9.32ScalarcodePoint31read-writecurrentCode Point 31.
1.3.6.1.4.1.161.19.3.3.9.33ScalarcodePoint32read-writecurrentCode Point 32.
1.3.6.1.4.1.161.19.3.3.9.34ScalarcodePoint33read-writecurrentCode Point 33.
1.3.6.1.4.1.161.19.3.3.9.35ScalarcodePoint34read-writecurrentCode Point 34.
1.3.6.1.4.1.161.19.3.3.9.36ScalarcodePoint35read-writecurrentCode Point 35.
1.3.6.1.4.1.161.19.3.3.9.37ScalarcodePoint36read-writecurrentCode Point 36.
1.3.6.1.4.1.161.19.3.3.9.38ScalarcodePoint37read-writecurrentCode Point 37.
1.3.6.1.4.1.161.19.3.3.9.39ScalarcodePoint38read-writecurrentCode Point 38.
1.3.6.1.4.1.161.19.3.3.9.40ScalarcodePoint39read-writecurrentCode Point 39.
1.3.6.1.4.1.161.19.3.3.9.41ScalarcodePoint40read-writecurrentCode Point 40.
1.3.6.1.4.1.161.19.3.3.9.42ScalarcodePoint41read-writecurrentCode Point 41.
1.3.6.1.4.1.161.19.3.3.9.43ScalarcodePoint42read-writecurrentCode Point 42.
1.3.6.1.4.1.161.19.3.3.9.44ScalarcodePoint43read-writecurrentCode Point 43.
1.3.6.1.4.1.161.19.3.3.9.45ScalarcodePoint44read-writecurrentCode Point 44.
1.3.6.1.4.1.161.19.3.3.9.46ScalarcodePoint45read-writecurrentCode Point 45.
1.3.6.1.4.1.161.19.3.3.9.47ScalarcodePoint46read-writecurrentCode Point 46.
1.3.6.1.4.1.161.19.3.3.9.48ScalarcodePoint47read-writecurrentCode Point 47.
1.3.6.1.4.1.161.19.3.3.9.49ScalarcodePoint48read-onlycurrentCode Point 48.
1.3.6.1.4.1.161.19.3.3.9.50ScalarcodePoint49read-writecurrentCode Point 49.
1.3.6.1.4.1.161.19.3.3.9.51ScalarcodePoint50read-writecurrentCode Point 50.
1.3.6.1.4.1.161.19.3.3.9.52ScalarcodePoint51read-writecurrentCode Point 51.
1.3.6.1.4.1.161.19.3.3.9.53ScalarcodePoint52read-writecurrentCode Point 52.
1.3.6.1.4.1.161.19.3.3.9.54ScalarcodePoint53read-writecurrentCode Point 53.
1.3.6.1.4.1.161.19.3.3.9.55ScalarcodePoint54read-writecurrentCode Point 54.
1.3.6.1.4.1.161.19.3.3.9.56ScalarcodePoint55read-writecurrentCode Point 55.
1.3.6.1.4.1.161.19.3.3.9.57ScalarcodePoint56read-onlycurrentCode Point 56.
1.3.6.1.4.1.161.19.3.3.9.58ScalarcodePoint57read-writecurrentCode Point 57.
1.3.6.1.4.1.161.19.3.3.9.59ScalarcodePoint58read-writecurrentCode Point 58.
1.3.6.1.4.1.161.19.3.3.9.60ScalarcodePoint59read-writecurrentCode Point 59.
1.3.6.1.4.1.161.19.3.3.9.61ScalarcodePoint60read-writecurrentCode Point 60.
1.3.6.1.4.1.161.19.3.3.9.62ScalarcodePoint61read-writecurrentCode Point 61.
1.3.6.1.4.1.161.19.3.3.9.63ScalarcodePoint62read-writecurrentCode Point 62.
1.3.6.1.4.1.161.19.3.3.9.64ScalarcodePoint63read-writecurrentCode Point 63.
1.3.6.1.4.1.161.19.3.3.10TablewhispUserTablenot-accessiblecurrentUser information table.
1.3.6.1.4.1.161.19.3.3.10.1RowwhispUserEntrynot-accessiblecurrentUser entry.
1.3.6.1.4.1.161.19.3.3.10.1.1ColumnentryIndexread-onlycurrentUser information table index.
1.3.6.1.4.1.161.19.3.3.10.1.2ColumnuserLoginNameread-onlycurrentUser name.
1.3.6.1.4.1.161.19.3.3.10.1.3ColumnuserPswdread-onlycurrentUser password.
1.3.6.1.4.1.161.19.3.3.10.1.4ColumnaccessLevelread-onlycurrentUser access level.
1.3.6.1.4.1.161.19.3.3.10.1.5ColumnloginStatusread-onlycurrentUser current status.
1.3.6.1.4.1.161.19.3.3.10.1.6ColumnloginMethodread-onlycurrentUser login method.
1.3.6.1.4.1.161.19.3.3.10.1.7ColumnsessionTimeread-onlycurrentUsers logged in session time.
1.3.6.1.4.1.161.19.3.3.11TablewhispLayer2NeighborTablenot-accessiblecurrentNeighbor information table.
1.3.6.1.4.1.161.19.3.3.11.1RowwhispLayer2NeighborEntrynot-accessiblecurrentNeighbor Entry.
1.3.6.1.4.1.161.19.3.3.11.1.1ColumnentryL2Indexread-onlycurrentNeighbor information table index.
1.3.6.1.4.1.161.19.3.3.11.1.2ColumnneighborMACread-onlycurrentNeighbor MAC.
1.3.6.1.4.1.161.19.3.3.11.1.3ColumnneighborIPread-onlycurrentNeighbor IP.
1.3.6.1.4.1.161.19.3.3.11.1.4ColumnneighborSiteNameread-onlycurrentNeighbor Site Name.
1.3.6.1.4.1.161.19.3.3.12NodewhispBoxEvent
1.3.6.1.4.1.161.19.3.3.12.1NodewhispBoxDHCPClientEvent
1.3.6.1.4.1.161.19.3.3.12.1.1NotificationboxLan1DHCPClientEventcurrentLan1 DHCP Client has received a new address via DHCP
1.3.6.1.4.1.161.19.3.3.12.2NodewhispBoxPoEEvent
1.3.6.1.4.1.161.19.3.3.12.2.1NotificationboxPoEType2PowerNotPresentcurrent802.3at Type 2 PoE not present, transmit and PoE out disabled
1.3.6.1.4.1.161.19.3.3.12.3NodewhispBoxRadioAlarmEvent
1.3.6.1.4.1.161.19.3.3.12.3.1NotificationradioStatusAlarmEventcurrentRadio Alarm Event notification.
1.3.6.1.4.1.161.19.3.3.13NodewhispBoxDNS
1.3.6.1.4.1.161.19.3.3.13.1ScalardnsIpStateread-writecurrentConfiguration for DNS server IP addresses of the management interface are learned: 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP 1 : Autom…
1.3.6.1.4.1.161.19.3.3.13.2ScalardnsPrimaryMgmtIPread-writecurrentPrimary DNS IP address for the management interface.
1.3.6.1.4.1.161.19.3.3.13.3ScalardnsAlternateMgmtIPread-writecurrentSecondary DNS IP address for the management interface.
1.3.6.1.4.1.161.19.3.3.13.4ScalardnsMgmtDomainNameread-writecurrentDomain Name to use for management DNS configuration. This domain name may be concatonated to DNS names used configured for the management interface.
1.3.6.1.4.1.161.19.3.3.13.5ScalartrapDomainNameAppendread-writecurrentSelect whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', trap1 i…
1.3.6.1.4.1.161.19.3.3.13.6Scalartrap1read-writecurrentSNMP Trap IP Address 1. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.7Scalartrap2read-writecurrentSNMP Trap IP Address 2. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.8Scalartrap3read-writecurrentSNMP Trap IP Address 3. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.9Scalartrap4read-writecurrentSNMP Trap IP Address 4. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.10Scalartrap5read-writecurrentSNMP Trap IP Address 5. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.11Scalartrap6read-writecurrentSNMP Trap IP Address 6. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.12Scalartrap7read-writecurrentSNMP Trap IP Address 7. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.13Scalartrap8read-writecurrentSNMP Trap IP Address 8. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.14Scalartrap9read-writecurrentSNMP Trap IP Address 9. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.15Scalartrap10read-writecurrentSNMP Trap IP Address 10. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.14NodewhispBoxSNMPv3
1.3.6.1.4.1.161.19.3.3.14.1Scalarsnmpv2cEnableread-writecurrentEnable(1) or Disable(0) SNMPv2c access
1.3.6.1.4.1.161.19.3.3.14.2Scalarsnmpv3EngineIdread-writecurrentThe SNMPv3 engine administratively-unique identifier. Length of the identifier should be 5-32 octets which is 10-64 hexadecimal characters and even.
1.3.6.1.4.1.161.19.3.3.14.3Scalarsnmpv3SecLvlread-writecurrentThe security level of the SNMPv3 Engine.
1.3.6.1.4.1.161.19.3.3.14.4Scalarsnmpv3AuthProtread-writecurrentThe SNMPv3 message authentication protocol to use. Currently only MD5 is supported.
1.3.6.1.4.1.161.19.3.3.14.5Scalarsnmpv3PrivProtread-writecurrentThe SNMPv3 message privacy/encryption protocol to use. Currently only CBC-DES is supported.
1.3.6.1.4.1.161.19.3.3.14.6ScalarroUserNameread-writecurrentSNMPv3 Read-Only username.
1.3.6.1.4.1.161.19.3.3.14.7ScalarroAuthPasswordread-writecurrentSNMPv3 Read-Only message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.8ScalarroPrivPasswordread-writecurrentSNMPv3 Read-Only message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.9ScalarrwUserEnableread-writecurrentSNMPv3 Read-Write User Enable.
1.3.6.1.4.1.161.19.3.3.14.10ScalarrwUserNameread-writecurrentSNMPv3 Read-Write Username.
1.3.6.1.4.1.161.19.3.3.14.11ScalarrwAuthPasswordread-writecurrentSNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.12ScalarrwPrivPasswordread-writecurrentSNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.13Scalarsnmpv3TrapEnableread-writecurrentSNMPv3 Trap enable option: (0) Disable - No SNMPv3 Traps Sent (1) Enable Traps to be sent for SNMPv3 Read-Only User (2) Enable Traps to be sent for SNMPv3 Read…
1.3.6.1.4.1.161.19.3.3.14.14Scalaruser1Enableread-writecurrentSNMPv3 Additional User1 Enable.
1.3.6.1.4.1.161.19.3.3.14.15ScalaruserName1read-writecurrentAdditional SNMPv3 Username1.
1.3.6.1.4.1.161.19.3.3.14.16Scalaruser1AuthPasswordread-writecurrentSNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.17Scalaruser1PrivPasswordread-writecurrentSNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.18ScalaruserGroup1read-writecurrentSNMPv3 User1 Group (ReadWrite/ReadOnly).
1.3.6.1.4.1.161.19.3.3.14.19ScalaruserName2read-writecurrentAdditional SNMPv3 Username2.
1.3.6.1.4.1.161.19.3.3.14.20Scalaruser2Enableread-writecurrentSNMPv3 Additional User2 Enable.
1.3.6.1.4.1.161.19.3.3.14.21Scalaruser2AuthPasswordread-writecurrentSNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.22Scalaruser2PrivPasswordread-writecurrentSNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.23Scalaruser2Groupread-writecurrentSNMPv3 User1 Group (ReadWrite/ReadOnly).
1.3.6.1.4.1.161.19.3.3.14.24ScalaruserName3read-writecurrentAdditional SNMPv3 Username1.
1.3.6.1.4.1.161.19.3.3.14.25Scalaruser3Enableread-writecurrentSNMPv3 Additional User3 Enable.
1.3.6.1.4.1.161.19.3.3.14.26Scalaruser3AuthPasswordread-writecurrentSNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.27Scalaruser3PrivPasswordread-writecurrentSNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.28Scalaruser3Groupread-writecurrentSNMPv3 User3 Group (ReadWrite/ReadOnly).
1.3.6.1.4.1.161.19.3.3.15NodewhispBoxRFPhysical
1.3.6.1.4.1.161.19.3.3.15.1TablewhispBoxRFPhysicalRadiosnot-accessiblecurrentRadio information table.
1.3.6.1.4.1.161.19.3.3.15.1.1RowwhispBoxRFPhysicalRadioEntrynot-accessiblecurrentRadio information table entry.
1.3.6.1.4.1.161.19.3.3.15.1.1.1ColumnradioIndexread-onlycurrentRadio Index.
1.3.6.1.4.1.161.19.3.3.15.1.1.2ColumnradioTyperead-onlycurrentIndicates if the radio is FSK or OFDM.
1.3.6.1.4.1.161.19.3.3.15.1.1.3ColumnradioPathsread-onlycurrentIndicates number of paths. For FSK or OFDM (non-MIMO), this is 1. For MIMO, it can be greater (with a current maximum of 2).
1.3.6.1.4.1.161.19.3.3.15.2TablewhispBoxRFPhysicalRadioPathsnot-accessiblecurrentRadio path information table.
1.3.6.1.4.1.161.19.3.3.15.2.1RowwhispBoxRFPhysicalRadioPathEntrynot-accessiblecurrentRadio path table entry.
1.3.6.1.4.1.161.19.3.3.15.2.1.1ColumnpathIndexread-onlycurrentPath Index.
1.3.6.1.4.1.161.19.3.3.15.3TablewhispBoxRFPhysicalRadioFrequenciesnot-accessiblecurrentAvailable frequency information table.
1.3.6.1.4.1.161.19.3.3.15.3.1RowwhispBoxRFPhysicalRadioFrequencyEntrynot-accessiblecurrentAvailable frequency table entry.
1.3.6.1.4.1.161.19.3.3.15.3.1.1Columnfrequencyread-onlycurrentFrequency.
1.3.6.1.4.1.161.19.3.3.16NodewhispBoxRFConfig
1.3.6.1.4.1.161.19.3.3.16.1TablewhispBoxRFConfigRadiosnot-accessiblecurrentRadio configuration table.
1.3.6.1.4.1.161.19.3.3.16.1.1RowwhispBoxRFConfigRadioEntrynot-accessiblecurrentRadio config table entry.
1.3.6.1.4.1.161.19.3.3.16.1.1.1ColumnradioConfigIndexread-onlycurrentRadio Config Index.
1.3.6.1.4.1.161.19.3.3.16.1.1.2ColumnradioFrequencyBandread-writecurrentCurrently configured radio band. Set is Engineering use only.
1.3.6.1.4.1.161.19.3.3.17TablewhispVLANRemarkTablenot-accessiblecurrentActive VLAN Remarking table.
1.3.6.1.4.1.161.19.3.3.17.1RowwhispVLANRemarkEntrynot-accessiblecurrentRemarking VLAN entry.
1.3.6.1.4.1.161.19.3.3.17.1.1ColumnsourceVIDread-onlycurrentSource VLAN ID.
1.3.6.1.4.1.161.19.3.3.17.1.2ColumnremarkVIDStateread-onlycurrentRemark VID State.
1.3.6.1.4.1.161.19.3.3.17.1.3ColumnremarkVIDread-onlycurrentRemark VID.
1.3.6.1.4.1.161.19.3.3.17.1.4ColumnremarkPriorityStateread-onlycurrentRemark Priority State.
1.3.6.1.4.1.161.19.3.3.17.1.5ColumnremarkPriorityread-onlycurrentRemark Priority.
1.3.6.1.4.1.161.19.3.3.18NodewhispBoxLink
1.3.6.1.4.1.161.19.3.3.18.1NodewhispBoxLinkTestConfig
1.3.6.1.4.1.161.19.3.3.18.1.1ScalarlinkTestLUIDBoxread-writecurrentLUID selection for Link Test. Valid range: 2-255. Read-Only for SM or Backhaul slave, Read/Write for AP.
1.3.6.1.4.1.161.19.3.3.18.1.2ScalarlinkTestDurationBoxread-writecurrentDuration for the Link Test. Valid range: 2-10 seconds
1.3.6.1.4.1.161.19.3.3.18.1.3ScalarlinkTestActionBoxread-writecurrentSetting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicat…
1.3.6.1.4.1.161.19.3.3.18.1.4ScalarlinkTestPktLengthBoxread-writecurrentPacket length for Link Test. Valid range: 64-1714 bytes
1.3.6.1.4.1.161.19.3.3.18.1.5ScalarlinkTestModeBoxread-writecurrentLink Test Mode 0 = Link Test without Bridging 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR 3 = Extrapolated Link Test (send only a few packe…
1.3.6.1.4.1.161.19.3.3.18.1.6ScalarlinkTestSNRCalculationBoxread-writecurrentEnable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will…
1.3.6.1.4.1.161.19.3.3.18.1.7ScalarlinkTestWithDualPathBoxread-writecurrentLink Test with: 0 = Low Priority VC only 1 = High and Low Priority VCs
1.3.6.1.4.1.161.19.3.3.18.1.8ScalarlinkTestNumPktBoxread-writecurrentNumber of packets to send. Valid range: 0-64 where 0 will flood the link for the duration of the test.
1.3.6.1.4.1.161.19.3.3.18.1.9ScalarlinkTestForceModulationBoxread-writecurrentEngineering use only. Link Test with: 0 = Normal Rate Adapt algorithm 1 = Force to max modultion - No Rate Adapt Algorithm
1.3.6.1.4.1.161.19.3.3.18.1.10ScalarlinkTestDirectionBoxread-writecurrentLink Test Direction - Engineering Use Only 0 = default (will do bidirectional) 1 = Uplink Only 2 = Downlink Only 3 = Bi-Directional (same as 0, setting to 3 wi…
1.3.6.1.4.1.161.19.3.3.18.1.11ScalarlinkTestFloodModeBoxread-writecurrentPMP 450m only. Engineering use only. Link Test usage: 0 = Packets will be sent out the SM ethernet port 1 = Packets will not be sent out the SM ethernet port
1.3.6.1.4.1.161.19.3.3.18.1.12ScalarlinkTestMumimoBoxread-writecurrentPMP 450m only. Link Test usage: 0 = MU-MIMO disabled (legacy or sector mode) 1 = MU-MIMO enabled
1.3.6.1.4.1.161.19.3.3.18.1.13ScalarlinkTestVCListBoxread-writecurrentPMP 450m only. Link Test usage: Enter VCs to be tested (eg. 18 - 22,24,32) Empty field or 0 will flood all registered VCs for duration of test
1.3.6.1.4.1.161.19.3.3.18.1.14ScalarlinkTestSMRestrictionread-writecurrentControl access to SM initiated Link Tests. Disabling will permit all Link Tests initiated at the SM. Enabling will only permit Link Tests that allow user traff…
1.3.6.1.4.1.161.19.3.3.18.2NodewhispBoxLinkTestResult
1.3.6.1.4.1.161.19.3.3.18.2.1ScalartestLUIDBoxread-onlycurrentLUID number of selected unit.
1.3.6.1.4.1.161.19.3.3.18.2.2ScalarlinkTestStatusBoxread-onlycurrentStatus for Link Test.
1.3.6.1.4.1.161.19.3.3.18.2.3ScalarlinkTestErrorBoxread-onlycurrentError status of Link Test: (1) Failed to recieve handshake from remote device (2) No session is currently active. Please try again after session established. (…
1.3.6.1.4.1.161.19.3.3.18.2.4ScalartestDurationBoxread-onlycurrentDuration of link test.
1.3.6.1.4.1.161.19.3.3.18.2.5ScalardownLinkRateBoxread-onlycurrentDownlink Rate.
1.3.6.1.4.1.161.19.3.3.18.2.6ScalarupLinkRateBoxread-onlycurrentUplink Rate.
1.3.6.1.4.1.161.19.3.3.18.2.7ScalardownLinkEffBoxread-onlycurrentDown Link Efficiency.
1.3.6.1.4.1.161.19.3.3.18.2.8ScalarmaxDwnLinkIndexBoxread-onlycurrentFor link test results, the maximum possible downlink efficiency percentage (always 100%).
1.3.6.1.4.1.161.19.3.3.18.2.9ScalaractDwnLinkIndexBoxread-onlycurrentActual down link index.
1.3.6.1.4.1.161.19.3.3.18.2.10ScalarexpDwnFragCountBoxread-onlycurrentExpected Fragment Count.
1.3.6.1.4.1.161.19.3.3.18.2.11ScalaractDwnFragCountBoxread-onlycurrentActual Fragment Count
1.3.6.1.4.1.161.19.3.3.18.2.12ScalarupLinkEffBoxread-onlycurrentUp link efficiency.
1.3.6.1.4.1.161.19.3.3.18.2.13ScalarexpUpFragCountBoxread-onlycurrentUplink expected Fragment Count.
1.3.6.1.4.1.161.19.3.3.18.2.14ScalaractUpFragCountBoxread-onlycurrentActual uplink Fragment Count.
1.3.6.1.4.1.161.19.3.3.18.2.15ScalarmaxUpLinkIndexBoxread-onlycurrentFor link test results, the maximum possible uplink efficiency percentage (always 100%).
1.3.6.1.4.1.161.19.3.3.18.2.16ScalaractUpLinkIndexBoxread-onlycurrentActual Up link index.
1.3.6.1.4.1.161.19.3.3.18.2.17Scalarfragments1xDwnLinkVerticalBoxread-onlycurrentNumber of fragments received on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.18Scalarfragments2xDwnLinkVerticalBoxread-onlycurrentNumber of fragments received on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.19Scalarfragments3xDwnLinkVerticalBoxread-onlycurrentNumber of fragments received on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.20Scalarfragments4xDwnLinkVerticalBoxread-onlycurrentNumber of fragments received on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.21Scalarfragments1xUpLinkVerticalBoxread-onlycurrentNumber of fragments received on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.22Scalarfragments2xUpLinkVerticalBoxread-onlycurrentNumber of fragments received on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.23Scalarfragments3xUpLinkVerticalBoxread-onlycurrentNumber of fragments received on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.24Scalarfragments4xUpLinkVerticalBoxread-onlycurrentNumber of fragments received on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.25ScalarbitErrorsCorrected1xDwnLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.26ScalarbitErrorsCorrected2xDwnLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.27ScalarbitErrorsCorrected3xDwnLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.28ScalarbitErrorsCorrected4xDwnLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.29ScalarbitErrorsCorrected1xUpLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.30ScalarbitErrorsCorrected2xUpLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.31ScalarbitErrorsCorrected3xUpLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.32ScalarbitErrorsCorrected4xUpLinkVerticalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.33ScalarsignalToNoiseRatioDownLinkVerticalBoxread-onlycurrentEstimated Signal to Noise Ratio in dB for the down link. For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.34ScalarsignalToNoiseRatioUpLinkVerticalBoxread-onlycurrentEstimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.35Scalarfragments1xDwnLinkHorizontalBoxread-onlycurrentNumber of fragments received on down link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted …
1.3.6.1.4.1.161.19.3.3.18.2.36Scalarfragments2xDwnLinkHorizontalBoxread-onlycurrentNumber of fragments received on down link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counte…
1.3.6.1.4.1.161.19.3.3.18.2.37Scalarfragments3xDwnLinkHorizontalBoxread-onlycurrentNumber of fragments received on down link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counte…
1.3.6.1.4.1.161.19.3.3.18.2.38Scalarfragments4xDwnLinkHorizontalBoxread-onlycurrentNumber of fragments received on down link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be count…
1.3.6.1.4.1.161.19.3.3.18.2.39Scalarfragments1xUpLinkHorizontalBoxread-onlycurrentNumber of fragments received on up link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on…
1.3.6.1.4.1.161.19.3.3.18.2.40Scalarfragments2xUpLinkHorizontalBoxread-onlycurrentNumber of fragments received on up link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted …
1.3.6.1.4.1.161.19.3.3.18.2.41Scalarfragments3xUpLinkHorizontalBoxread-onlycurrentNumber of fragments received on up link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted …
1.3.6.1.4.1.161.19.3.3.18.2.42Scalarfragments4xUpLinkHorizontalBoxread-onlycurrentNumber of fragments received on up link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted…
1.3.6.1.4.1.161.19.3.3.18.2.43ScalarbitErrorsCorrected1xDwnLinkHorizontalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments receive…
1.3.6.1.4.1.161.19.3.3.18.2.44ScalarbitErrorsCorrected2xDwnLinkHorizontalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments recei…
1.3.6.1.4.1.161.19.3.3.18.2.45ScalarbitErrorsCorrected3xDwnLinkHorizontalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments recei…
1.3.6.1.4.1.161.19.3.3.18.2.46ScalarbitErrorsCorrected4xDwnLinkHorizontalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on down link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments rece…
1.3.6.1.4.1.161.19.3.3.18.2.47ScalarbitErrorsCorrected1xUpLinkHorizontalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on up link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received …
1.3.6.1.4.1.161.19.3.3.18.2.48ScalarbitErrorsCorrected2xUpLinkHorizontalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on up link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments receive…
1.3.6.1.4.1.161.19.3.3.18.2.49ScalarbitErrorsCorrected3xUpLinkHorizontalBoxread-onlycurrentEngineering use only. Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal p…
1.3.6.1.4.1.161.19.3.3.18.2.50ScalarbitErrorsCorrected4xUpLinkHorizontalBoxread-onlycurrentNumber of bit errors corrected on average per fragment on up link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments receiv…
1.3.6.1.4.1.161.19.3.3.18.2.51ScalarsignalToNoiseRatioDownLinkHorizontalBoxread-onlycurrentEstimated Signal to Noise Ratio in dB for the down link. For MIMO and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.3.18.2.52ScalarsignalToNoiseRatioUpLinkHorizontalBoxread-onlycurrentEstimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will retu…
1.3.6.1.4.1.161.19.3.3.18.2.53ScalardownLinkRateExtrapolatedBoxread-onlycurrentExtrapolated Downlink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what woul…
1.3.6.1.4.1.161.19.3.3.18.2.54ScalarupLinkRateExtrapolatedBoxread-onlycurrentExtrapolated Uplink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would …
1.3.6.1.4.1.161.19.3.3.18.2.55ScalarlinkTestLastRunTimeread-onlycurrentTime and Date when last link test ran.
1.3.6.1.4.1.161.19.3.3.18.2.56ScalarlinkTestMissedFragDwnLinkread-onlycurrentNumber of missed fragments during link test in the downlink. Only supported on 450 and 450i.
1.3.6.1.4.1.161.19.3.3.18.2.57ScalarlinkTestMissedFragUpLinkread-onlycurrentNumber of missed fragments during link test in the uplink. Only supported on 450 and 450i.
1.3.6.1.4.1.161.19.3.3.18.2.58ScalarlinkTestNumPktTxActCntread-onlycurrentNumber of actual packets transmitted during link test.
1.3.6.1.4.1.161.19.3.3.18.2.59ScalarlinkTestNumPktTxExpCntread-onlycurrentNumber of expected packets to be transmitted during link test.
1.3.6.1.4.1.161.19.3.3.18.2.60ScalarlinkTestNumPktRxActCntread-onlycurrentNumber of actual packets received during link test.
1.3.6.1.4.1.161.19.3.3.18.2.61ScalarlinkTestNumPktRxExpCntread-onlycurrentNumber of packets expected to be received during link test.
1.3.6.1.4.1.161.19.3.3.18.4ScalarwhispRegStatusBoxread-onlyobsoleteThis shows the registration status of a link.
1.3.6.1.4.1.161.19.3.3.18.5NodewhispBoxLinkTestMVCResult
1.3.6.1.4.1.161.19.3.3.18.5.1ScalarlinkTestMVCXmtFragsTotalDLread-onlycurrentTotal Downlink Fragments Transmitted
1.3.6.1.4.1.161.19.3.3.18.5.2ScalarlinkTestMVCRcvFragsTotalDLread-onlycurrentTotal Downlink Fragments Received
1.3.6.1.4.1.161.19.3.3.18.5.3ScalarlinkTestMVCThroughputTotalDLread-onlycurrentTotal Downlink Throughput for Tested VCs
1.3.6.1.4.1.161.19.3.3.18.5.4ScalarlinkTestMVCThroughputTotalUntestedVCsDLread-onlycurrentTotal Downlink Throughput for Untested VCs. This is the amount of user traffic that was transmitted to VCs during the test that were not part of the Link Test.
1.3.6.1.4.1.161.19.3.3.18.5.5ScalarlinkTestMVCEfficiencyTotalDLread-onlycurrentTotal Downlink Efficiency
1.3.6.1.4.1.161.19.3.3.18.5.6ScalarlinkTestMVCSlotDistributionDLread-onlycurrentDownlink Slot Distribution. Average group size per slot per frame represented as a percentage. 450m only.
1.3.6.1.4.1.161.19.3.3.18.6TablewhispBoxLinkTestMVCTablenot-accessiblecurrentLink Test with Multiple VC results.
1.3.6.1.4.1.161.19.3.3.18.6.1RowwhispBoxLinkTestMVCEntrynot-accessiblecurrentLink Test with Multiple VC results.
1.3.6.1.4.1.161.19.3.3.18.6.1.1ColumnlinkTestMVCVCread-onlycurrentVC
1.3.6.1.4.1.161.19.3.3.18.6.1.2ColumnlinkTestMVCPriorityread-onlycurrentVC Priority
1.3.6.1.4.1.161.19.3.3.18.6.1.3ColumnlinkTestMVCXmtFragsDLread-onlycurrentDownlink Fragments Transmitted
1.3.6.1.4.1.161.19.3.3.18.6.1.4ColumnlinkTestMVCRcvFragsDLread-onlycurrentDownlink Fragments Received
1.3.6.1.4.1.161.19.3.3.18.6.1.5ColumnlinkTestMVCThroughputDLread-onlycurrentDownlink Throughput
1.3.6.1.4.1.161.19.3.3.18.6.1.6ColumnlinkTestMVCEfficiencyDLread-onlycurrentDownlink Efficiency
1.3.6.1.4.1.161.19.3.3.18.6.1.7ColumnlinkTestMVCSumimoModRateDLread-onlycurrentDownlink SU-MIMO Modulation Transmit Rate. 0 : No session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A 4 : 4X 256-QAM MIMO-A or …
1.3.6.1.4.1.161.19.3.3.18.6.1.8ColumnlinkTestMVCSumimoXmtModeDLread-onlycurrentDownlink SU-MIMO Transmit Mode. 0 : MIMO-B 1 : MIMO-A 2 : No session
1.3.6.1.4.1.161.19.3.3.18.6.1.9ColumnlinkTestMVCMumimoModRateDLread-onlycurrentDownlink MU-MIMO Modulation Transmit Rate. 450m only. 0 : Invalid 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A 4 : 4X 256-QAM MI…
1.3.6.1.4.1.161.19.3.3.18.6.1.10ColumnlinkTestMVCMumimoXmtModeDLread-onlycurrentDownlink MU-MIMO Transmit Mode. 450m only. 0 : MIMO-B 1 : MIMO-A 2 : Invalid
1.3.6.1.4.1.161.19.3.3.18.6.1.11ColumnlinkTestMVCGroupingRatioDLread-onlycurrentDownlink Grouping Ratio. The percentage of time that a VC is grouped with other VCs to make a MU-MIMO group. 450m only.
1.3.6.1.4.1.161.19.3.3.19NodewhispUserAuthSecurity
1.3.6.1.4.1.161.19.3.3.19.1TablecertTableUserAuthnot-accessiblecurrentThe table of CA Certificates for User Auth on radio.
1.3.6.1.4.1.161.19.3.3.19.1.1RowcertEntryUserAuthnot-accessiblecurrentEntry of Certifcates.
1.3.6.1.4.1.161.19.3.3.19.1.1.1ColumncertIdxread-onlycurrentUser information table index.
1.3.6.1.4.1.161.19.3.3.19.1.1.2ColumncertStatusread-onlycurrent0: Inactive 1: Active
1.3.6.1.4.1.161.19.3.3.19.1.1.3ColumncertActionread-writecurrent0: No Operation 1: Delete Certificate
1.3.6.1.4.1.161.19.3.3.19.1.1.4ColumncertDNread-onlycurrentDistinguished Name of Certificate
MIB Viewer