WHISP-PLV-GATEWAY-MIB
174 objects
Initial Version.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress |
| WHISP-GLOBAL-REG-MIB | whispPlvGateway |
| WHISP-TCV2-MIB | WhispLUID WhispMACAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.161.19.3.8.1 | IdentitywhispPlvGatewayMIB | Initial Version. | ||
| 1.3.6.1.4.1.161.19.3.8.1.1 | NodewhispPlvGatewayObjects | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.1 | NodewhispPlvGwInfo | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.1.1 | ScalargwInfoModel | read-only | current | This object indicates the Gateway Model Number. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.2 | ScalargwInfoSerialNumber | read-only | current | This object indicates the Gateway Serial Number. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.3 | ScalargwInfoLanMac | read-only | current | This object indicates the Gateway's LAN port MAC Address. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.4 | ScalargwInfoWanMac | read-only | current | This object indicates the Gateway's WAN port MAC Address. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.5 | ScalargwInfoPlcMac | read-only | current | This object indicates the Gateway PLC MAC Address |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.6 | ScalargwInfoHardwareVer | read-only | current | This object indicates the Gateway Hardware Version. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.7 | ScalargwInfoDevFirmwareVer | read-only | current | This object indicates the Gateway Device Firmware Version. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.8 | ScalargwInfoLoaderVer | read-only | current | This object indicates the Gateway Loader Version. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.9 | ScalargwInfoSimFirmwareVer | read-only | current | This object indicates the Intellon Simple Module Firmware Version. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.10 | ScalargwInfoModemCount | read-only | current | This object indicates the number of Modems registered to the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.11 | ScalargwInfoDeviceUpgradeStatus | read-only | current | This object indicates the Gateway Last Software Upgrade Status. 0 - Upgrade not started 1 - Upgrade in progress 2 - Last Upgrade failed 3 - Last Upgrade was su… |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.12 | ScalargwInfoSimUpgradeStatus | read-only | current | This object indicates the Intellon Simple Module's last Software Upgrade Status. 0 - Upgrade not started 1 - Upgrade in progress 2 - Last Upgrade failed 3 - La… |
| 1.3.6.1.4.1.161.19.3.8.1.1.1.13 | ScalargwInfoTemperature | read-only | current | This object indicates the ambient temperature of the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.2 | NodewhispPlvGwConfig | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.2.1 | ScalargwConfNtpConfig | read-write | current | This object is used to Enable or Disable the Gateway to set it's system clock using NTP. |
| 1.3.6.1.4.1.161.19.3.8.1.1.2.2 | ScalargwConfNtpServer | read-write | current | This object is used to configure the NTP Server. |
| 1.3.6.1.4.1.161.19.3.8.1.1.2.3 | ScalargwConfTime | read-write | current | This object is used to configure Gateway's system clock time. The input format is HH:MM::SS. This object is accessible only if gwConfNtpConfig is disabled. |
| 1.3.6.1.4.1.161.19.3.8.1.1.2.4 | ScalargwConfDate | read-write | current | This object is used to configure Gateway's system clock date. The input format is YYYY/MM/DD. This object is accessible only if gwConfNtpConfig is disabled. |
| 1.3.6.1.4.1.161.19.3.8.1.1.2.5 | ScalargwConfModemTableTimeout | read-write | current | This object is used to configure the Modem Table Timeout. Any Inactive Modem will be deleted from the Modem table, if it is inactive for a period more than the… |
| 1.3.6.1.4.1.161.19.3.8.1.1.2.6 | ScalargwConfAutoLogoutTime | read-write | current | This object is used to configure the Gateway Auto Logout Time. User will be logged out of the Gateway's web interface, if there is inactivity for a period more… |
| 1.3.6.1.4.1.161.19.3.8.1.1.2.7 | ScalargwConfPSD | read-write | current | This object indicates the Power Spectral Density of the signal, at all the 84 carriers, that the device transmits. Starting at the left most octet, which repre… |
| 1.3.6.1.4.1.161.19.3.8.1.1.3 | NodewhispPlvGwTrapConfig | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.3.1 | ScalargwConfTrapIp1 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #1. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.2 | ScalargwConfTrapCommStr1 | read-write | current | This object is used to configure SNMP Community string for Trap Client #1. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.3 | ScalargwConfTrapIp2 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #2. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.4 | ScalargwConfTrapCommStr2 | read-write | current | This object is used to configure SNMP Community string for Trap Client #2. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.5 | ScalargwConfTrapIp3 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #3. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.6 | ScalargwConfTrapCommStr3 | read-write | current | This object is used to configure SNMP Community string for Trap Client #3. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.7 | ScalargwConfTrapIp4 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #4. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.8 | ScalargwConfTrapCommStr4 | read-write | current | This object is used to configure SNMP Community string for Trap Client #4. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.9 | ScalargwConfTrapIp5 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #5. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.10 | ScalargwConfTrapCommStr5 | read-write | current | This object is used to configure SNMP Community string for Trap Client #5. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.11 | ScalargwConfTrapIp6 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #6. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.12 | ScalargwConfTrapCommStr6 | read-write | current | This object is used to configure SNMP Community string for Trap Client #6. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.13 | ScalargwConfTrapIp7 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #7. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.14 | ScalargwConfTrapCommStr7 | read-write | current | This object is used to configure SNMP Community string for Trap Client #7. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.15 | ScalargwConfTrapIp8 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #8. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.16 | ScalargwConfTrapCommStr8 | read-write | current | This object is used to configure SNMP Community string for Trap Client #8. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.17 | ScalargwConfTrapIp9 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #9. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.18 | ScalargwConfTrapCommStr9 | read-write | current | This object is used to configure SNMP Community string for Trap Client #9. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.19 | ScalargwConfTrapIp10 | read-write | current | This object is used to configure IP Address of SNMP Trap Client #10. |
| 1.3.6.1.4.1.161.19.3.8.1.1.3.20 | ScalargwConfTrapCommStr10 | read-write | current | This object is used to configure SNMP Community string for Trap Client #10. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4 | NodewhispPlvGwPwrLnStats | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.4.1 | ScalargwPwrLnMaxDelay | read-only | current | This object indicates the Maximum transfer delay on Powerline. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.2 | ScalargwPwrLnTxAck | read-only | current | This object indicates the Powerline Transmit ACK count. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.3 | ScalargwPwrLnTxNak | read-only | current | This object indicates the Powerline Transmit NACK count. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.4 | ScalargwPwrLnTxFail | read-only | current | This object indicates the Powerline Transmission Failures. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.5 | ScalargwPwrLnTxColl | read-only | current | This object indicates the Powerline Transmission Collisions. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.6 | ScalargwPwrLnTxCarrLoss | read-only | current | This object indicates the Powerline Transmt Carrier Loss Detection. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.7 | ScalargwPwrLnRoboByte40 | read-only | current | This object indicates the raw value of channel capacity as reported by Intellon PHY |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.8 | ScalargwPwrLnRoboFails | read-only | current | This object indicates the Powerline protocol receive failures, in ROBO mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.4.9 | ScalargwPwrLnRoboDrops | read-only | current | This object indicates the Powerline protocol transmit drops, in ROBO mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5 | NodewhispPlvGwAdmConfig | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.5.1 | ScalargwAdmConfLoginUsername | read-write | current | This object is used to configure Gateway's System Management Login Username. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.2 | ScalargwAdmConfLoginPassword | read-write | current | This object is used to configure Gateway's System Management Login Password. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.3 | ScalargwAdmConfNEK | read-write | current | This object is used to configure Network Encryption Key of the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.4 | ScalargwAdmConfAuthServIp1 | read-write | current | This object is used to configure BAM Server #1 IP Address. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.5 | ScalargwAdmConfAuthServIp2 | read-write | current | This object is used to configure BAM Server #2 IP Address. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.6 | ScalargwAdmConfAuthServIp3 | read-write | current | This object is used to configure BAM Server #3 IP Address. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.7 | ScalargwAdmConfAuthMode | read-write | current | This object is used to Enable or Disable BAM Authentication on the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.8 | ScalargwAdmConfAuthKey | read-write | current | This object is used to configure Authentication Key, to use with BAM Server, on the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.9 | ScalargwAdmConfAuthKeyOption | read-write | current | This object is used to configure the Authentication Key to be used, on the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.10 | ScalargwAdmConfSnmpGetCommStr | read-write | current | This object is used to configure SNMP 'Read' community string of the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.11 | ScalargwAdmConfSnmpSetCommStr | read-write | current | This object is used to configure SNMP 'Read-Write' community string of the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.12 | ScalargwAdmConfSnmpAdminCommStr | read-write | current | This object is used to configure SNMP 'Admin' community string of the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.13 | ScalargwAdmConfFtpServerIp | read-write | current | This object is used to configure IP Address of FTP server hosting auto-upgrade files. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.14 | ScalargwAdmConfFtpUsername | read-write | current | This object is used to configure Username to login to a FTP server, for use with FTP-based auto-upgrade. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.15 | ScalargwAdmConfFtpPassword | read-write | current | This object is used to configure Password to login to a FTP server, for use with FTP-based auto-upgrade. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.16 | ScalargwAdmConfFtpFile | read-write | current | This object is used to configure Path and/or Filename of the firmware file, for use with FTP-based auto-upgrade. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.17 | ScalargwAdmConfDeviceUpgradeStart | read-write | current | This object is used to Start Device Firmware Upgrade process in the Gateway. To start the upgrade process, this object should be set to '1'. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.18 | ScalargwAdmConfSimUpgradeStart | read-write | current | This object is used to start Intellon Simple Module Firmware Upgrade process in the Gateway. To start the upgrade process, this object should be set to '1'. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.19 | ScalargwAdmConfSystemReboot | read-write | current | This object is used to Reboot the Gateway. To reboot the Gateway, this object should be set to '1'. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.20 | ScalargwAdmConfReset | read-write | current | This object is used to reset the Gateway configuration to Factory Defaults. To reset the Gateway configuration to factory defaults, this object should be set t… |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.21 | ScalargwAdmConfDeviceMode | read-write | current | This object is used to configure the device in 'switch' mode or 'NAT' mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.22 | ScalargwAdmConfLUIDStart | read-write | current | This object is used to configure the starting value of the Modem LUID range. This value should not be greater than gwAdmConfLUIDEnd value |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.23 | ScalargwAdmConfLUIDEnd | read-write | current | This object is used to configure the ending value of the Modem LUID range. This value should not be less than gwAdmConfLUIDStart value |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.24 | ScalargwAdmConfVLANPassthroughStatus | read-write | current | This object is used to enable or disable VLAN Passthrough feature. |
| 1.3.6.1.4.1.161.19.3.8.1.1.5.25 | ScalargwAdmConfManagementVLANId | read-write | current | This object is used to enable or disable VLAN Passthrough feature. |
| 1.3.6.1.4.1.161.19.3.8.1.1.6 | NodewhispPlvGwAdmLanConfig | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.6.1 | ScalargwAdmConfLanConfig | read-write | current | This object is used to Enable or Disable DHCP client. |
| 1.3.6.1.4.1.161.19.3.8.1.1.6.2 | ScalargwAdmConfLanIp | read-write | current | This object is used to configure LAN IP Address. |
| 1.3.6.1.4.1.161.19.3.8.1.1.6.3 | ScalargwAdmConfLanSubnetMask | read-write | current | This object is used to configure LAN IP Subnet Mask. |
| 1.3.6.1.4.1.161.19.3.8.1.1.6.4 | ScalargwAdmConfLanGatewayIp | read-write | current | This object is used to configure Gateway IP Address. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7 | NodewhispPlvGwAdmSnmpAcessConfig | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.7.1 | ScalargwAdmSnmpAccessIpNetwork1 | read-write | current | This object is used to configure SNMP Access Network Address #1. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.2 | ScalargwAdmSnmpAccessIpNetworkMask1 | read-write | current | This object is used to configure SNMP Access Network Address Mask #1. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.3 | ScalargwAdmSnmpAccessIpNetwork2 | read-write | current | This object is used to configure SNMP Access Network Address #2. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.4 | ScalargwAdmSnmpAccessIpNetworkMask2 | read-write | current | This object is used to configure SNMP Access Network Address Mask #2. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.5 | ScalargwAdmSnmpAccessIpNetwork3 | read-write | current | This object is used to configure SNMP Access Network Address #3. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.6 | ScalargwAdmSnmpAccessIpNetworkMask3 | read-write | current | This object is used to configure SNMP Access Network Address Mask #3. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.7 | ScalargwAdmSnmpAccessIpNetwork4 | read-write | current | This object is used to configure SNMP Access Network Address #4. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.8 | ScalargwAdmSnmpAccessIpNetworkMask4 | read-write | current | This object is used to configure SNMP Access Network Address Mask #4. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.9 | ScalargwAdmSnmpAccessIpNetwork5 | read-write | current | This object is used to configure SNMP Access Network Address #5. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.10 | ScalargwAdmSnmpAccessIpNetworkMask5 | read-write | current | This object is used to configure SNMP Access Network Address Mask #5. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.11 | ScalargwAdmSnmpAccessIpNetwork6 | read-write | current | This object is used to configure SNMP Access Network Address #6. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.12 | ScalargwAdmSnmpAccessIpNetworkMask6 | read-write | current | This object is used to configure SNMP Access Network Address Mask #6. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.13 | ScalargwAdmSnmpAccessIpNetwork7 | read-write | current | This object is used to configure SNMP Access Network Address #7. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.14 | ScalargwAdmSnmpAccessIpNetworkMask7 | read-write | current | This object is used to configure SNMP Access Network Address Mask #7. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.15 | ScalargwAdmSnmpAccessIpNetwork8 | read-write | current | This object is used to configure SNMP Access Network Address #8. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.16 | ScalargwAdmSnmpAccessIpNetworkMask8 | read-write | current | This object is used to configure SNMP Access Network Address Mask #8. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.17 | ScalargwAdmSnmpAccessIpNetwork9 | read-write | current | This object is used to configure SNMP Access Network Address #9. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.18 | ScalargwAdmSnmpAccessIpNetworkMask9 | read-write | current | This object is used to configure SNMP Access Network Address Mask #9. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.19 | ScalargwAdmSnmpAccessIpNetwork10 | read-write | current | This object is used to configure SNMP Access Network Address #10. |
| 1.3.6.1.4.1.161.19.3.8.1.1.7.20 | ScalargwAdmSnmpAccessIpNetworkMask10 | read-write | current | This object is used to configure SNMP Access Network Address Mask #10. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8 | NodewhispPlvGwAdmWanConfig | |||
| 1.3.6.1.4.1.161.19.3.8.1.1.8.1 | ScalargwAdmWConfWanConfig | read-write | current | This object is used to configure the WAN Type. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.2 | ScalargwAdmWConfWanIp | read-write | current | This object is used to configure WAN IP Address of the Gateway. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.3 | ScalargwAdmWConfSubnetMask | read-write | current | This object is used to configure WAN IP Subnet Mask of the Gateway. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.4 | ScalargwAdmWConfGateway | read-write | current | This object is used to configure Default Gateway IP of the Gateway. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.5 | ScalargwAdmWConfDNS1 | read-write | current | This object is used to configure DNS Server #1. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.6 | ScalargwAdmWConfDNS2 | read-write | current | This object is used to configure DNS Server #2. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.7 | ScalargwAdmWConfPppoeUsername | read-write | current | This object is used to configure PPPoE Username. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.8 | ScalargwAdmWConfPppoePassword | read-write | current | This object is used to configure PPPoE Password. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.9 | ScalargwAdmWConfDhcpConfig | read-write | current | This object is used to Enable or Disable DHCP Server. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.10 | ScalargwAdmWConfDhcpStartIp | read-write | current | This object is used to configure Starting Address of the IP address block, that the DHCP Server can assign to its clients. This object is accessible only if th… |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.11 | ScalargwAdmWConfDhcpEndIp | read-write | current | This object is used to configure Last Address of the IP address block, that the DHCP Server can assign to its clients. This object is accessible only if the Ga… |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.12 | ScalargwAdmWConfDhcpLeaseTime | read-write | current | This object is used to configure time period for which the IP address assigned to a client is valid. This object is accessible only if the Gateway is in NAT mo… |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.13 | ScalargwAdmWConfUpnpConfig | read-write | current | This object is used to Enable or Disable the UPnP in the Gateway. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.8.14 | ScalargwAdmWConfFirewallConfig | read-write | current | This object is used to Enable or Disable Firewall in the Gateway. This object is accessible only if the Gateway is in NAT mode. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9 | TablewhispPlvGwModemTable | not-accessible | current | This table contains one row per Modem registered to the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1 | RowwhispPlvGwModemEntry | not-accessible | current | Information about a particular Modem registered to the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.1 | ColumngwModemLUID | read-only | current | This object indicates the unique value assigned by the Gateway, to each Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.2 | ColumngwModemDescr | read-only | current | The value of this object should be same as the object 'sysName' of the Device registered to the Gateway. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.3 | ColumngwModemPhysAddress | read-only | current | This object indicates the PLC MAC Address of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.4 | ColumngwModemIP | read-only | current | This object indicates the IP Address of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.5 | ColumngwModemHardwareVersion | read-only | current | This object indicates the Hardware Version of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.6 | ColumngwModemSoftwareVersion | read-only | current | This object indicates the Software Version of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.7 | ColumngwModemSoftwareBootVersion | read-only | current | This object indicates the Boot Loader Version of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.8 | ColumngwModemSessState | read-only | current | This object indicates the current Operational state of the Modem. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Ch… |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.9 | ColumngwModemsessionCount | read-only | current | This object indicates the number of times the Modem is In and Out of session. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.10 | ColumngwModemMtu | read-only | current | This object indicates the size of the largest datagram that can be sent and received by the Modem, in octets. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.11 | ColumngwModemSpeed | read-only | current | This object indicates an estimate of Modem's current bandwidth, in Mbps. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.12 | ColumngwModemInOctets | read-only | current | This object indicates the octets received by the Modem over Powerline, including framing characters. to each Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.13 | ColumngwModemInUcastPkts | read-only | current | This object indicates the number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.14 | ColumngwModemInNUcastPkts | read-only | current | This object indicates the number of subnetwork-broadcast and subnetwork-multiicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.15 | ColumngwModemInDiscards | read-only | current | This object indicates the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverabl… |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.16 | ColumngwModemInError | read-only | current | This object indicates the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.17 | ColumngwModemInUnknownProtos | read-only | current | This object indicates the number of packets received, but were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.18 | ColumngwModemOutOctets | read-only | current | This object indicates the total number of octets transmitted, including the framing characters. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.19 | ColumngwModemOutUcastPkts | read-only | current | This object indicates the total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that we… |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.20 | ColumngwModemOutNUcastPkts | read-only | current | This object indicates the total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnet… |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.21 | ColumngwModemOutDiscards | read-only | current | This object indicates the number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitt… |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.22 | ColumngwModemOutError | read-only | current | This object indicates the number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.23 | ColumngwModemOutQLen | read-only | current | This object indicates the number of packets in output packet queue. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.24 | ColumngwModemRoboByte40 | read-only | current | This object indicates the current channel receive capacity of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.25 | ColumngwModemRoboFails | read-only | current | This object indicates the Powerline link receive failures of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.26 | ColumngwModemRoboDrops | read-only | current | This object indicates the Powerline link send failures of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.27 | ColumngwModemDeviceType | read-only | current | This object indicates the Type of the Device registered to the Gateway 0 = Modem 1 = Repeater 2 = Other |
| 1.3.6.1.4.1.161.19.3.8.1.1.9.1.28 | ColumngwModemPSD | read-only | current | This object indicates the Software Version of the Modem. |
| 1.3.6.1.4.1.161.19.3.8.1.2 | NodewhispPlvGatewayEvents | |||
| 1.3.6.1.4.1.161.19.3.8.1.2.0 | NodegwTrapPrefix | |||
| 1.3.6.1.4.1.161.19.3.8.1.2.0.1 | NotificationgwTrapRegComplete | current | This Notification is generated if the Modem has successfully registered to the Gateway. | |
| 1.3.6.1.4.1.161.19.3.8.1.2.0.2 | NotificationgwTrapRegLost | current | This Notification is generated if the Modem entry is removed from the Gateway's Modem Table, after being inactive for a period more than 'gwConfModemTableTimeo… | |
| 1.3.6.1.4.1.161.19.3.8.1.2.0.3 | NotificationgwTrapDeviceUpgradeStarted | current | This Notification is generated if the Gateway has started the Device Firmware Upgrade process. | |
| 1.3.6.1.4.1.161.19.3.8.1.2.0.4 | NotificationgwTrapDeviceUpgradeCompleted | current | This Notification is generated once the Device Firmware Upgrade process is completed. | |
| 1.3.6.1.4.1.161.19.3.8.1.2.0.5 | NotificationgwTrapSimUpgradeStarted | current | This Notification is generated if the Gateway has started the Simple Module Firmware Upgrade process. | |
| 1.3.6.1.4.1.161.19.3.8.1.2.0.6 | NotificationgwTrapSimUpgradeCompleted | current | This Notification is generated once the Simple Module Firmware Upgrade process is completed. | |
| 1.3.6.1.4.1.161.19.3.8.1.3 | NodewhispPlvGatewayConformance | |||
| 1.3.6.1.4.1.161.19.3.8.1.3.1 | NodewhispPlvGatewayGroups | |||
| 1.3.6.1.4.1.161.19.3.8.1.3.1.1 | GroupwhispPlvGatewayInfoGroup | current | The collection of objects that indicates Gateway device information. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.2 | GroupwhispPlvGatewayConfigGroup | current | The collection of objects used to configure the Gateway. These objects are accessible to everyone. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.3 | GroupwhispPlvGatewayTrapConfigGroup | current | The collection of Gateway's SNMP Trap Configuration objects. These objects are accessible to everyone. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.4 | GroupwhispPlvGatewayPowerlineGroup | current | The collection of Gateway's Powerline Statistics These objects are accessible to everyone. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.5 | GroupwhispPlvGatewayAdmConfigGroup | current | The collection of objects that are used to configure the Gateway. These objects are accessible only thru 'admin' community string. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.6 | GroupwhispPlvGatewayAdmLanConfigGroup | current | The collection of Gateway's LAN configuration objects. These objects are accessible only thru 'admin' community string. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.7 | GroupwhispPlvGatewayAdmSnmpAccessConfigGroup | current | The collection of objects that are used to configure the Gateway. These objects are accessible only thru 'admin' community string. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.8 | GroupwhispPlvGatewayAdmWanConfigGroup | current | The collection of Gateway's WAN configuration objects. These objects are accessible only thru 'admin' community string. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.9 | GroupwhispPlvGatewayAdmModemGroup | current | The collection of objects that gives information of the Modems connected to the Gateway. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.1.10 | GroupwhispPlvGatewayNotificationsGroup | current | The collection of Notifications generated by the Gateway. | |
| 1.3.6.1.4.1.161.19.3.8.1.3.2 | NodewhispPlvGatewayCompliances | |||
| 1.3.6.1.4.1.161.19.3.8.1.3.2.1 | CompliancewhispPlvGatewayCompliance | current | The compliance statement of SNMP entities which implement the WHISP-PLV-GATEWAY-MIB. |