WLSX-POE-MIB
34 objects
This MIB module defines MIB objects which provide information about the Power Sourcing Equipment(PSE) and Powered Device(PD). The following abbreviations are defined in [IEEE-802.3af] and will be used with the same significance in this document: PSE - Power Sourcing Equipment; PD - Powered Device;
Imported Objects
| ARUBA-MIB | wlsxEnterpriseMibModules |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14823.2.2.1.18 | IdentitywlsxPoEMIB | This MIB module defines MIB objects which provide information about the Power Sourcing Equipment(PSE) and Powered Device(PD). The following abbreviations are d… | ||
| 1.3.6.1.4.1.14823.2.2.1.18.0 | NodewlsxPoEMIBNotifications | |||
| 1.3.6.1.4.1.14823.2.2.1.18.0.1 | NotificationwlsxTrapInterfacePoEState | current | When there is a PoE state transition i.e on or off then this trap is sent to the management entity | |
| 1.3.6.1.4.1.14823.2.2.1.18.1 | NodewlsxPoEMIBObjects | |||
| 1.3.6.1.4.1.14823.2.2.1.18.1.1 | TablewlsxPsePortTable | not-accessible | current | A table of objects that display the parameters configured for a power ethernet port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1 | RowwlsxPsePortEntry | not-accessible | current | A set of objects that display the configuration of a power ethernet port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.1 | ColumnwlsxPsePortIndex | not-accessible | current | This variable uniquely identifies the power ethernet port for which this entry is populated. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.2 | ColumnwlsxPsePortAdminStatus | read-only | current | Admin status of a power ethernet port. A value of enable(1) means that the port has PSE functions enabled on it. A value of disable(2) means that the port does… |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.3 | ColumnwlsxPsePortState | read-only | current | This object indicates the status of the port. The reason for these states is indicated by wlsxPsePortStatus. on(1) - indicates that PSE is sourcing power. off(… |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4 | ColumnwlsxPsePortStatus | read-only | current | This object indicates the status of the port. unknown(1) - indicates either a state of off with the reason being not known or the state is on. offAdmin(2) - in… |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5 | ColumnwlsxPsePortDiscoveryMode | read-only | current | This object indicates the method of discovery used by the system for the detection of the Powered Device(PD). A value of unknown(0) means that the discovery me… |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.6 | ColumnwlsxPsePortIsPdDetected | read-only | current | This object indicates if a Powered Device(PD) is detected on this port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.7 | ColumnwlsxPsePortIsIeeePd | read-only | current | This object indicates the IEEE compliance of a Powered Device(PD). A value of true(1) means the Powered Device(PD) is IEEE compliant. A value of false(2) means… |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.8 | ColumnwlsxPsePortPdClass | read-only | current | This object indicates the Power classification of the Powered Device(PD) connected on the port. A value of 'class0(1)' indicates that the power classification … |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.9 | ColumnwlsxPsePortPriority | read-only | current | This object indicates the configured priority for this port. low(1) - indicates the priority of the port is low. high(2) - indicates the priority of the port i… |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.10 | ColumnwlsxPsePortDefaultPowerMax | read-only | current | This object indicates the default maximum power available on this port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.11 | ColumnwlsxPsePortPowerAllocated | read-only | current | This object indicates the configured power allocation on this port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.12 | ColumnwlsxPsePortPowerConsumed | read-only | current | This object gives the power consumption by the PD on this port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.13 | ColumnwlsxPsePortVoltage | read-only | current | This object indicates the voltage on this port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.14 | ColumnwlsxPsePortCurrent | read-only | current | This object indicates the current on this port. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.2 | TablewlsxPseSlotTable | not-accessible | current | A table of objects that display all the details about the Power Sourcing Equipment(PSE). |
| 1.3.6.1.4.1.14823.2.2.1.18.1.2.1 | RowwlsxPseSlotEntry | not-accessible | current | A set of objects that displays all the information about the PSE on this device on a per slot basis. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.1 | ColumnwlsxPseSlotIndex | not-accessible | current | This object uniquely identifies a PSE entry. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.2 | ColumnwlsxPseSlotPowerAvailable | read-only | current | This object indicates the total amount of power available from this PSE. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.3 | ColumnwlsxPseSlotPowerConsumption | read-only | current | This object indicates the total amount of power consumed from this PSE. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.4 | ColumnwlsxPseSlotGuardBand | read-only | current | This object indicates the power left unused to be provided in case of spikes in the amount of power used. |
| 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.5 | ColumnwlsxPseSlotPoEManagementMode | read-only | current | This object indicates the PSE management mode. A value of dynamic(1) indicates that it is dynamic power management. A value of static(2) indicates that it is s… |
| 1.3.6.1.4.1.14823.2.2.1.18.2 | NodewlsxPoEMIBConformance | |||
| 1.3.6.1.4.1.14823.2.2.1.18.2.1 | NodewlsxPoEMIBCompliances | |||
| 1.3.6.1.4.1.14823.2.2.1.18.2.1.1 | CompliancewlsxPoEMIBCompliance | current | This is the statement of compliance. | |
| 1.3.6.1.4.1.14823.2.2.1.18.2.2 | NodewlsxPoEMIBGroups | |||
| 1.3.6.1.4.1.14823.2.2.1.18.2.2.1 | GroupwlsxPoEMIBPortGroup | current | This group provides the details of all the Power ethernet ports on the device. | |
| 1.3.6.1.4.1.14823.2.2.1.18.2.2.2 | GroupwlsxPoEMIBMainPseGroup | current | This group provides the details of the PSE entry. | |
| 1.3.6.1.4.1.14823.2.2.1.18.2.2.3 | GroupwlsxPoEMIBNotificationsGroup | current | This group gives the collection of Notifications related to power consumption on an port. |