MIB Viewer

WLSX-SWITCH-MIB

198 objects
This MIB module defines MIB objects which provide System level information about the Aruba switches.
OIDNameAccessStatusDescription
1.3.6.1.4.1.14823.2.2.1.1IdentitywlsxSwitchMIBThis MIB module defines MIB objects which provide System level information about the Aruba switches.
1.3.6.1.4.1.14823.2.2.1.1.1NodewlsxSystemXGroup
1.3.6.1.4.1.14823.2.2.1.1.1.1ScalarwlsxHostnameread-onlycurrentName of the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.2ScalarwlsxModelNameread-onlycurrentModel Name of the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.3ScalarwlsxSwitchIpread-onlycurrentSwitch IP as configured by the user. This IP address uniquely identifies the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.4ScalarwlsxSwitchRoleread-onlycurrentRole of this switch in the Switch Domain.
1.3.6.1.4.1.14823.2.2.1.1.1.5ScalarwlsxSwitchMasterIpread-onlycurrentMaster IP of the switch
1.3.6.1.4.1.14823.2.2.1.1.1.6TablewlsxSwitchListTablenot-accessiblecurrentThis Table will list all the switches in the Switch Domain. It will be populated only on the master switch. Local switches return empty table.
1.3.6.1.4.1.14823.2.2.1.1.1.6.1RowwlsxSwitchListEntrynot-accessiblecurrentSwitch List Entry
1.3.6.1.4.1.14823.2.2.1.1.1.6.1.1ColumnswitchListSwitchIPAddressnot-accessiblecurrentIP Address of the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.6.1.2ColumnswitchListSwitchRoleread-onlycurrentRole of the Switch.
1.3.6.1.4.1.14823.2.2.1.1.1.7ScalarwlsxSwitchLicenseCountread-onlycurrentThe number of licenses installed on the switch
1.3.6.1.4.1.14823.2.2.1.1.1.8TablewlsxSwitchLicenseTablenot-accessiblecurrentThis table lists all licenses installed on the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.8.1RowwlsxLicenseEntrynot-accessiblecurrentLicense Entry
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1ColumnlicenseIndexnot-accessiblecurrentLicense ID number
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2ColumnlicenseKeyread-onlycurrentLicense Key
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3ColumnlicenseInstalledread-onlycurrentLicense installation time
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4ColumnlicenseExpiresread-onlycurrentLicense expiry time
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5ColumnlicenseFlagsread-onlycurrentLicense flags; E - enabled; A - auto-generated; R - reboot required to activate
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6ColumnlicenseServiceread-onlycurrentThe service enabled by this license.
1.3.6.1.4.1.14823.2.2.1.1.1.9TablewlsxSysXProcessorTablenot-accessiblecurrentThe table of processors contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1RowwlsxSysXProcessorEntrynot-accessiblecurrentAn entry for one processor contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1.1ColumnsysXProcessorIDnot-accessiblecurrentProcessor Index.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2ColumnsysXProcessorDescrread-onlycurrentdescription of the processor.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3ColumnsysXProcessorLoadread-onlycurrentThe average, over the last minute, of the percentage of time that this processor was not idle.
1.3.6.1.4.1.14823.2.2.1.1.1.10TablewlsxSysXStorageTablenot-accessiblecurrentThe table of Storage-devices contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1RowwlsxSysXStorageEntrynot-accessiblecurrentAn entry for one long-term storage device contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1ColumnsysXStorageIndexnot-accessiblecurrent
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2ColumnsysXStorageTyperead-onlycurrent
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3ColumnsysXStorageSizeread-onlycurrentsize of the storage filesystem in MB.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.4ColumnsysXStorageUsedread-onlycurrentsize of the storage filesystem in MB.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.5ColumnsysXStorageNameread-onlycurrentname of the storage filesystem.
1.3.6.1.4.1.14823.2.2.1.1.1.11TablewlsxSysXMemoryTablenot-accessiblecurrentThe memory status of the switch
1.3.6.1.4.1.14823.2.2.1.1.1.11.1RowwlsxSysXMemoryEntrynot-accessiblecurrentAn entry for one memory region on the switch. Currently, only the CP region is monitored.
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1ColumnsysXMemoryIndexnot-accessiblecurrent
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2ColumnsysXMemorySizeread-onlycurrentTotal memory in KB.
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3ColumnsysXMemoryUsedread-onlycurrentUsed memory in KB.
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4ColumnsysXMemoryFreeread-onlycurrentFree memory in KB.
1.3.6.1.4.1.14823.2.2.1.1.1.12ScalarwlsxSwitchLicenseSerialNumberread-onlycurrentThe license serial number of the switch
1.3.6.1.4.1.14823.2.2.1.1.2NodewlsxUserInfoGroup
1.3.6.1.4.1.14823.2.2.1.1.2.1TablewlsxSwitchUserTablenot-accessiblecurrentThis Table lists all the users (both wired and wireless) currently connected to the switch. Users are identified by their IP address.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1RowwlsxSwitchUserEntrynot-accessiblecurrentUser Entry
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.1ColumnuserIpAddressnot-accessiblecurrentIP Address from which the user connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.2ColumnuserPhyAddressread-onlycurrentPhysical Address of the station from which the user connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.3ColumnuserNameread-onlycurrentName of the User.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.4ColumnuserRoleread-onlycurrentThe Role configured for this user.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.5ColumnuserUpTimeread-onlycurrentTime since the user is connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.6ColumnuserAuthenticationMethodread-onlycurrentAuthentication mechanism used by the user to connect to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.7ColumnuserLocationread-onlycurrentLocation of the access point (in Building.Floor.... format), which the user used to connect to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.8ColumnuserServerNameread-onlycurrentName of the Back-end authentication server, used to authenticate the user.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.9ColumnuserConnectedVlanread-onlycurrentVlan on which the user is connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.10ColumnuserConnectedSlotread-onlycurrentSlot on switch, where the user connection terminates.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.11ColumnuserConnectedPortread-onlycurrentPort on switch, where the user connection terminates.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.12ColumnuserBWContractNameread-onlycurrentName of the Bandwidth Contract applied to this user.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.13ColumnuserBWContractUsageread-onlycurrentIndicates how the Bandwidth Contract is used.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.14ColumnuserConnectedModuleread-onlycurrentThe module to which the user is connected, if wired.
1.3.6.1.4.1.14823.2.2.1.1.2.2TablewlsxSwitchStationMgmtTablenot-accessiblecurrentThis Table lists all the wireless stations associated with the Access points connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1RowwlsxSwitchStationMgmtEntrynot-accessiblecurrentStation Management Entry
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.1ColumnstaPhyAddressnot-accessiblecurrentThe Physical Address of the Station.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.2ColumnstaAccessPointBSSIDnot-accessiblecurrentBSSID of the Access point through which the station is connected to the switch
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.3ColumnstaUserNameread-onlycurrentName of the User connecting from this station.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.4ColumnstaUserRoleread-onlycurrentUser Role.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.5ColumnstaAssociationIDread-onlycurrentAID with which the Station is associated with this system.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6ColumnstaAccessPointESSIDread-onlycurrentESSID of the Access point
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7ColumnstaSignalToNoiseRatioread-onlycurrentSNR for the BSSID.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8ColumnstaTransmitRateread-onlycurrentIndicates Transmit rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9ColumnstaReceiveRateread-onlycurrentIndicates Receive rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.2.3TablewlsxSwitchStationStatsTablenot-accessiblecurrentThis Table lists the statistics of all the wireless stations associated with the Access points connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1RowwlsxSwitchStationStatsEntrynot-accessiblecurrentStation Statistics Entry
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1ColumnstaTxPacketsread-onlycurrentTotal Packets Transmitted by the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2ColumnstaTxBytesread-onlycurrentTotal Bytes Transmitted by the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3ColumnstaRxPacketsread-onlycurrentTotal Packets Received by the Station
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4ColumnstaRxBytesread-onlycurrentTotal Bytes Received by the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5ColumnstaBwRateread-onlycurrentBandwidth Rate in Kbps of the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6ColumnstaFrameRetryRateread-onlycurrentStation Frame Retry Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.7ColumnstaFrameLowSpeedRateread-onlycurrentStation Frame Low Speed Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.8ColumnstaFrameNonUnicastRateread-onlycurrentStation Frame Non Unicast Packet Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.9ColumnstaFrameFragmentationRateread-onlycurrentStation Frame Fragmentation Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.10ColumnstaFrameReceiveErrorRateread-onlycurrentStation Frame Receive Error Rate.
1.3.6.1.4.1.14823.2.2.1.1.3NodewlsxAccessPointInfoGroup
1.3.6.1.4.1.14823.2.2.1.1.3.1ScalarwlsxSwitchTotalNumAccessPointsread-onlycurrentTotal Number of Access Points Connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.2ScalarwlsxSwitchTotalNumStationsAssociatedread-onlycurrentTotal Number of Stations Associated to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.3TablewlsxSwitchAccessPointTablenot-accessiblecurrentThis Table lists all the Access Points Connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1RowwlsxSwitchAccessPointEntrynot-accessiblecurrentStation Management Entry
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1ColumnapBSSIDnot-accessiblecurrentThe Physical Address of the Access Point.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2ColumnapESSIDread-onlycurrentESSID of the Access Point
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3ColumnapSlotread-onlycurrentSlot to which the Access Point is connected.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4ColumnapPortread-onlycurrentPort to which the Access Point is connected.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5ColumnapIpAddressread-onlycurrentAddress of the Access Point.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6ColumnapPhyTyperead-onlycurrentPhysical Layer Protocol support of the AP.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7ColumnapTyperead-onlycurrentIndicates whether the Access point is an Air Monitor or regular AP.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8ColumnapCurrentChannelread-onlycurrentThe Current Operating frequency channel.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9ColumnapLocationread-onlycurrentLocation of the AP defined in Building.Floor.... mode.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10ColumnapTotalTimeread-onlycurrentTime since the Ap is connected to the switch
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11ColumnapInactiveTimeread-onlycurrentTime since the Ap has been inactive
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12ColumnapLoadBalancingread-onlycurrentIndicates whether Load balancing is enabled or not.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13ColumnapChannelNoiseread-onlycurrentIndicates the noise on the channel
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14ColumnapSignalToNoiseRatioread-onlycurrentSNR for the BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15ColumnapTransmitRateread-onlycurrentIndicates Transmit rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16ColumnapReceiveRateread-onlycurrentIndicates Receive rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.3.4TablewlsxSwitchGlobalAPTablenot-accessibledeprecatedThis Table lists all the Access Points Connected in the Switch Domain. This table is valid only on a Master switch. On a Local switch, the table is empty.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1RowwlsxSwitchGlobalAPEntrynot-accessibledeprecatedStation Management Entry
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1ColumnglobalAPLocationnot-accessibledeprecatedPhysical Location of the AP, defined in Building.Floor.Location format.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2ColumnglobalAPAddressnot-accessibledeprecatedAddress of the Access Point.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3ColumnglobalAPLocalSwitchread-onlydeprecatedIP Address of the Local Switch this Access Point is connected to.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4ColumnglobalAPdot11aPhyAddrread-onlydeprecatedPhysical Mac address of the module supporting dot11a in the Access Point. AP can have support for both dot11a and dot11b physical layer.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5ColumnglobalAPdot11bPhyAddrread-onlydeprecatedPhysical Mac address of the module supporting dot11b in the Access Point. AP can have support for both dot11a and dot11b physical layer.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6ColumnglobalAPStateread-onlydeprecatedState of the AP. 1 2 3-7
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7ColumnglobalAPdot11gPhyAddrread-onlydeprecatedPhysical Mac address of the module supporting dot11g in the Access Point. AP can have support for both a,b,g physical layer.
1.3.6.1.4.1.14823.2.2.1.1.3.5TablewlsxSwitchAccessPointStatsTablenot-accessiblecurrentThis Table lists the statistics of all the Access Points Connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1RowwlsxSwitchAccessPointStatsEntrynot-accessiblecurrentAp Stats Entry.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.1ColumnapStatsChannelread-onlycurrentChannel on which the ap is operating.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2ColumnapChannelBwRateread-onlycurrentBandwidth Rate in Kbps of the apChannel.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3ColumnapChannelFrameRetryRateread-onlycurrentAp Channel Frame Retry Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4ColumnapChannelFrameLowSpeedRateread-onlycurrentAp Channel Frame Low Speed Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.5ColumnapChannelFrameNonUnicastRateread-onlycurrentAp Channel Frame Non Unicast Packet Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.6ColumnapChannelFrameFragmentationRateread-onlycurrentAp Channel Frame Fragmentation Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7ColumnapChannelFrameReceiveErrorRateread-onlycurrentAp Channel Frame Receive Error Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8ColumnapBSSTxPacketsread-onlycurrentTotal Packets Transmitted by the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9ColumnapBSSTxBytesread-onlycurrentTotal Bytes Transmitted by the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10ColumnapBSSRxPacketsread-onlycurrentTotal Packets Received by the ap on this BSSID
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11ColumnapBSSRxBytesread-onlycurrentTotal Bytes Received by the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12ColumnapBSSBwRateread-onlycurrentBandwidth Rate in Kbps of the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13ColumnapBSSFrameRetryRateread-onlycurrentFrame Retry Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14ColumnapBSSFrameLowSpeedRateread-onlycurrentFrame Low Speed Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.15ColumnapBSSFrameNonUnicastRateread-onlycurrentFrame Non Unicast Packet Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.16ColumnapBSSFrameFragmentationRateread-onlycurrentFrame Fragmentation Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17ColumnapBSSFrameReceiveErrorRateread-onlycurrentFrame Receive Error Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.100NodewlsxSwitchTraps
1.3.6.1.4.1.14823.2.2.1.1.100.100NodewlsxSwitchTrapObjectsGroup
1.3.6.1.4.1.14823.2.2.1.1.100.100.1ScalarwlsxAuthServerNameread-onlycurrentThis Object is used in the traps to indicate the Authentication Server, used for Authentication.
1.3.6.1.4.1.14823.2.2.1.1.100.100.2ScalarwlsxAuthServerTimeoutread-onlycurrentThis Object is used in the traps to indicate the Authentication Server Timeout.
1.3.6.1.4.1.14823.2.2.1.1.100.100.4ScalarwlsxFanNumberread-onlycurrentThis Object is used in the traps to indicate a failing fan number.
1.3.6.1.4.1.14823.2.2.1.1.100.100.5ScalarwlsxLineCardNumberread-onlycurrentThis Object is used in the traps to indicate a Line Card in the switch.
1.3.6.1.4.1.14823.2.2.1.1.100.100.6ScalarwlsxVoltageTyperead-onlycurrentThis Object is used in the traps to indicate the type of the voltage.
1.3.6.1.4.1.14823.2.2.1.1.100.100.7ScalarwlsxVoltageValueread-onlycurrentThis Object is used in the traps to indicate the voltage value in Float.
1.3.6.1.4.1.14823.2.2.1.1.100.100.8ScalarwlsxTemperatureValueread-onlycurrentThis Object is used in the traps to indicate Temperature Value.
1.3.6.1.4.1.14823.2.2.1.1.100.100.9ScalarwlsxProcessNameread-onlycurrentThis Object is used in the traps to indicate a process name.
1.3.6.1.4.1.14823.2.2.1.1.100.100.10ScalarwlsxStationMacAddressread-onlycurrentThe Physical Address of the Station.
1.3.6.1.4.1.14823.2.2.1.1.100.100.11ScalarwlsxStationBlackListReasonread-onlycurrentThe Reason for which a station is black listed.
1.3.6.1.4.1.14823.2.2.1.1.100.100.12ScalarwlsxSpoofedIpAddressread-onlycurrentThis Object is used in a trap to identify a Spoofed IP Address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.13ScalarwlsxSpoofedOldPhyAddressread-onlycurrentThis Object is used in a trap to identify a Old Mac Address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.14ScalarwlsxSpoofedNewPhyAddressread-onlycurrentThis Object is used in a trap to identify a New Mac Address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.15ScalarwlsxDBNameread-onlycurrentThis Object is used in a trap to identify name of the Database.
1.3.6.1.4.1.14823.2.2.1.1.100.100.16ScalarwlsxDBUserNameread-onlycurrentThis Object is used in a trap to identify name of the Database user.
1.3.6.1.4.1.14823.2.2.1.1.100.100.17ScalarwlsxDBIpAddressread-onlycurrentThis Object is used in a trap to identify the IpAddress of the DB.
1.3.6.1.4.1.14823.2.2.1.1.100.100.18ScalarwlsxDBTyperead-onlycurrentThis Object is used in a trap to identify the Port of the user.
1.3.6.1.4.1.14823.2.2.1.1.100.100.19ScalarwlsxVrIDread-onlycurrentThis Object contains the Virtual Router Identifier.
1.3.6.1.4.1.14823.2.2.1.1.100.100.20ScalarwlsxVrMasterIpread-onlycurrentThis Object contains the Master IP address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.21ScalarwlsxVrrpOperStateread-onlycurrentThis Object represents the VRRP operational state.
1.3.6.1.4.1.14823.2.2.1.1.100.100.22ScalarwlsxApTxPowerread-onlycurrentThis Object contains the value of the AP Transmit Power.
1.3.6.1.4.1.14823.2.2.1.1.100.100.23ScalarwlsxESIServerGrpNameread-onlycurrentThis Object represents the External Services Interface (ESI) Server Group name
1.3.6.1.4.1.14823.2.2.1.1.100.100.24ScalarwlsxESIServerNameread-onlycurrentThis Object represents the External Services Interface (ESI) Server name
1.3.6.1.4.1.14823.2.2.1.1.100.100.25ScalarwlsxESIServerIpaddressread-onlycurrentThis Object represents the External Services Interface (ESI) Server IP Address
1.3.6.1.4.1.14823.2.2.1.1.100.100.26ScalarwlsxLicenseDaysRemainingread-onlycurrentThis Object represents number of the days remaining prior to a license expiry
1.3.6.1.4.1.14823.2.2.1.1.100.100.27ScalarwlsxSlotNumberread-onlycurrentThis Object is used in the traps to indicate a Line Card in the switch. This value matches the value of sysExtCardSlot.
1.3.6.1.4.1.14823.2.2.1.1.100.1001NotificationwlsxSwitchIPChangedcurrentA trap which indicates that the switch IP address has changed.
1.3.6.1.4.1.14823.2.2.1.1.100.1002NotificationwlsxSwitchRoleChangecurrentA trap which indicates that the role of the switch has changed in the Domain.
1.3.6.1.4.1.14823.2.2.1.1.100.1003NotificationwlsxUserEntryCreatedcurrentA trap which indicates that a New user is created.
1.3.6.1.4.1.14823.2.2.1.1.100.1004NotificationwlsxUserEntryDeletedcurrentA trap which indicates that a user is deleted.
1.3.6.1.4.1.14823.2.2.1.1.100.1005NotificationwlsxUserEntryAuthenticatedcurrentA trap which indicates that a user is Authenticated.
1.3.6.1.4.1.14823.2.2.1.1.100.1006NotificationwlsxUserEntryDeAuthenticatedcurrentA trap which indicates that a user is Deauthenticated.
1.3.6.1.4.1.14823.2.2.1.1.100.1007NotificationwlsxUserAuthenticationFailedcurrentA trap which indicates that a user authentication has failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1008NotificationwlsxAuthServerReqTimedOutcurrentA trap which indicates that the authentication server request timed out.
1.3.6.1.4.1.14823.2.2.1.1.100.1009NotificationwlsxAuthServerTimedOutcurrentA trap which indicates that the authentication server timed out.
1.3.6.1.4.1.14823.2.2.1.1.100.1010NotificationwlsxAuthServerIsUpcurrentA trap which indicates that the authentication server is up.
1.3.6.1.4.1.14823.2.2.1.1.100.1011NotificationwlsxAuthMaxUserEntriescurrentA trap which indicates that the User Entries table is full and cannot add any more entries.
1.3.6.1.4.1.14823.2.2.1.1.100.1012NotificationwlsxAuthMaxAclEntriescurrentA trap which indicates that the Acl Entries table is full and cannot add any more entries.
1.3.6.1.4.1.14823.2.2.1.1.100.1013NotificationwlsxAuthMaxBWContractscurrentA trap which indicates that the switch reached the maximum number of configurable Bandwidth contracts.
1.3.6.1.4.1.14823.2.2.1.1.100.1014NotificationwlsxPowerSupplyFailurecurrentA trap which indicates that the power supply has failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1015NotificationwlsxFanFailurecurrentA trap which indicates that the fan has failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1016NotificationwlsxOutOfRangeVoltagecurrentA trap which indicates that the switch received out of range voltage.
1.3.6.1.4.1.14823.2.2.1.1.100.1017NotificationwlsxOutOfRangeTemperaturecurrentA trap which indicates that the Temperature is out of bounds.
1.3.6.1.4.1.14823.2.2.1.1.100.1018NotificationwlsxLCInsertedcurrentA trap which indicates that a Line card is inserted.
1.3.6.1.4.1.14823.2.2.1.1.100.1019NotificationwlsxSCInsertedcurrentA trap which indicates that a supervisory card is inserted.
1.3.6.1.4.1.14823.2.2.1.1.100.1020NotificationwlsxGBICInsertedcurrentA trap which indicates that a GBIC is inserted in a line card.
1.3.6.1.4.1.14823.2.2.1.1.100.1021NotificationwlsxProcessDiedcurrentA trap which indicates that a process has died.
1.3.6.1.4.1.14823.2.2.1.1.100.1022NotificationwlsxProcessExceedsMemoryLimitscurrentA trap which indicates that a process is consuming large amounts of memory.
1.3.6.1.4.1.14823.2.2.1.1.100.1023NotificationwlsxLowOnFlashSpacecurrentA trap which indicates that the switch is running low on flash space.
1.3.6.1.4.1.14823.2.2.1.1.100.1024NotificationwlsxLowMemorycurrentA trap which indicates that the system free memory is low.
1.3.6.1.4.1.14823.2.2.1.1.100.1025NotificationwlsxFanTrayRemovedcurrentA trap which indicates that the fan tray is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1026NotificationwlsxFanTrayInsertedcurrentA trap which indicates that the fan tray is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1027NotificationwlsxLCRemovedcurrentA trap which indicates that a Line card is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1028NotificationwlsxSCRemovedcurrentA trap which indicates that a supervisory card is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1029NotificationwlsxPowerSupplyMissingcurrentA trap which indicates that the power supply is missing.
1.3.6.1.4.1.14823.2.2.1.1.100.1030NotificationwlsxAccessPointIsUpdeprecatedA trap which indicates that an Access point at Location apLocation and Address apIpAddress is up.
1.3.6.1.4.1.14823.2.2.1.1.100.1031NotificationwlsxAccessPointIsDowndeprecatedA trap which indicates that an Access point at Location apLocation and Address apIpAddress is down.
1.3.6.1.4.1.14823.2.2.1.1.100.1032NotificationwlsxCoverageHoleDetectedcurrentA trap which indicates that an Access point at Location apLocation and Address apIpAddress has detected a Coverage Hole.
1.3.6.1.4.1.14823.2.2.1.1.100.1033NotificationwlsxChannelChangeddeprecatedA trap which indicates that an Access point at Location apLocation and Address apIpAddress has changed the channel to apCurrentChannel.
1.3.6.1.4.1.14823.2.2.1.1.100.1034NotificationwlsxStationAddedToBlackListcurrentA trap which indicates that a station with address wlsxStationMacAddress is black listed for wlsxStationBlackListReason reason.
1.3.6.1.4.1.14823.2.2.1.1.100.1035NotificationwlsxStationRemovedFromBlackListcurrentA trap which indicates that a station with address wlsxStationMacAddress is removed from black list.
1.3.6.1.4.1.14823.2.2.1.1.100.1036NotificationwlsxIpSpoofingDetectedcurrentA trap indicating that the switch detected IP Spoofing.
1.3.6.1.4.1.14823.2.2.1.1.100.1037NotificationwlsxDBCommunicationFailurecurrentA trap to indicate that communication with Database failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1038NotificationwlsxVrrpStateChangecurrentA trap which indicates that VRRP State has changed on the switch.
1.3.6.1.4.1.14823.2.2.1.1.100.1039NotificationwlsxAPRadioAttributesChangedcurrentA trap which indicates changes in the Radio attributes of an Access Point at location apLocation and address apIpAddress. Ap channel is apCurrentChannel, and T…
1.3.6.1.4.1.14823.2.2.1.1.100.1040NotificationwlsxESIServerUpcurrentA trap which indicates that a ESI server <wlsxESIServerName> in group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is up
1.3.6.1.4.1.14823.2.2.1.1.100.1041NotificationwlsxESIServerDowncurrentA trap which indicates that a ESI server <wlsxESIServerName> in group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is down
1.3.6.1.4.1.14823.2.2.1.1.100.1042NotificationwlsxLicenseExpirycurrentA trap which indicates that one or more licenses on the switch will expire in <wlsxLicenseDaysRemaining> days