WNDAP620
551 objects
The MIB module for 802.11a/b/g/n Enterprise WiFi AP. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100).accesspoint(7).wndap620(12)
Imported Objects
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526 | Nodenetgear | |||
| 1.3.6.1.4.1.4526.100 | NodeproductID | |||
| 1.3.6.1.4.1.4526.100.7 | Nodeaccesspoint | |||
| 1.3.6.1.4.1.4526.100.7.12 | Identitywndap620 | The MIB module for 802.11a/b/g/n Enterprise WiFi AP. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100).accesspoint(7).wn… | ||
| 1.3.6.1.4.1.4526.100.7.12.1 | NodebasicSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.1.1 | ScalarapName | read-write | current | This attribute indicates the name of AP. The name is also the NETBIOS name of the AP. |
| 1.3.6.1.4.1.4526.100.7.12.1.2 | ScalarsysMacAddress | read-only | current | This attribute indicates the MAC Address of the ethernet interface. |
| 1.3.6.1.4.1.4526.100.7.12.1.3 | ScalarsysVersion | read-only | current | This attribute indicates the system firmware version. |
| 1.3.6.1.4.1.4526.100.7.12.1.4 | ScalarsysCountryRegion | read-write | current | This attribute indicates the region of operation for which the wireless interface is intended. |
| 1.3.6.1.4.1.4526.100.7.12.1.5 | ScalaradminPasswd | read-write | current | This attribute indicates the administrator password. The AP can be managed from utilities such as ssh, HTTP/HTTPS browser, SNMP management tool and so on. |
| 1.3.6.1.4.1.4526.100.7.12.1.6 | ScalardhcpClientStatus | read-write | current | This attribute indicates the DHCP client status. DHCP client is disabled by default. |
| 1.3.6.1.4.1.4526.100.7.12.1.7 | ScalaripAddr | read-write | current | This attribute indicates the static management IP address of the AP. |
| 1.3.6.1.4.1.4526.100.7.12.1.8 | ScalarnetmaskAddr | read-write | current | This attribute indicates the static netmask of the management interface. |
| 1.3.6.1.4.1.4526.100.7.12.1.9 | ScalargatewayAddr | read-write | current | This attribute indicates the static gateway IP address for the management interface. |
| 1.3.6.1.4.1.4526.100.7.12.1.10 | ScalarpriDnsAddr | read-write | current | This attribute indicates the address that will be used as the first entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set … |
| 1.3.6.1.4.1.4526.100.7.12.1.11 | ScalarsndDnsAddr | read-write | current | This attribute indicates the address that will be used as the second entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set… |
| 1.3.6.1.4.1.4526.100.7.12.1.12 | ScalarspanTreeStatus | read-write | current | This attribute indicates the status of Spanning Tree Protocol in the AP. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.1.13 | ScalarmanagementVlanID | read-write | current | This attribute indicates the Management VLAN ID. Default value of management VLAN ID is 1. |
| 1.3.6.1.4.1.4526.100.7.12.1.14 | ScalarnetworkIntegrityCheck | read-write | current | This attribute indicates the status of internet connection check . AP automatically validates whether the internet connection is active before allowing wireles… |
| 1.3.6.1.4.1.4526.100.7.12.1.15 | ScalaruntaggedVlanStatus | read-write | current | This attribute indicates the status of untagged VLAN. The untagged VLAN is enabled by default. |
| 1.3.6.1.4.1.4526.100.7.12.1.16 | ScalaruntaggedVlanID | read-write | current | This attribute indicates the Untagged VLAN ID. Default value of untagged VLAN ID is 1. |
| 1.3.6.1.4.1.4526.100.7.12.1.17 | ScalarsysHardwareVersion | read-only | current | This attribute indicates the system hardware version. |
| 1.3.6.1.4.1.4526.100.7.12.1.18 | ScalarsysSerialNumber | read-only | current | This attribute indicates the system serial number. |
| 1.3.6.1.4.1.4526.100.7.12.1.19 | ScalarlldpStatus | read-write | current | This attribute indicates the LLDP status. LLDP is enabled by default. |
| 1.3.6.1.4.1.4526.100.7.12.2 | NodewlanSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.2.1 | TablewlanSettingTable | not-accessible | current | wireless interface settings table. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1 | RowwlanSettingEntry | not-accessible | current | An entry in the wlanSettingTable. Each wlanSettingEntry represents a wireless profile (2.4GHz band or 5GHz band). On a single radio device, the same wireless i… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.1 | ColumnwlanIndex | read-only | current | Specifies one of the 2 wireless profiles. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.2 | ColumnoperateMode | read-write | current | This attribute shall indicate the desired wireless operating mode. The option are: dot11b - All 802.11b wireless stations can be used. 802.11g wireless station… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.3 | ColumnradioStatus | read-write | current | This attribute shall indicate the status of radio. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.4 | Columnchannel | read-write | current | This attribute shall indicate the channel number to be used. The default value is auto(0). |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.5 | ColumndataRate | read-write | current | This attribute shall indicate the transmit rate applicable to 802.11b, 802.11bg and 802.11a modes. When the operateMode is: dot11b(0) - can set to 0:best, 2:1M… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.6 | ColumnwmmSupport | read-write | current | This field indicates the status of WMM(Wireless Multimedia) suport. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.7 | ColumnbeaconInterval | read-write | current | This attribute shall indicate the Beacon Interval. The default value is 100. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.8 | ColumnrtsThreshold | read-write | current | This attribute shall indicate the RTS threshold. The default value is 2347. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.9 | ColumnfragLength | read-write | current | This attribute shall indicate the fragmentation threshold. The default value is 2346. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.10 | ColumndtimInterval | read-write | current | This attribute shall indicate the beacon delivery traffic indication message period in multiples of beaconInterval. The default value is 3. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.11 | ColumnpreambleType | read-write | current | This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b, 802.11bg and 802.11ng modes. When set to auto(0), depending on … |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.12 | ColumntxPower | read-write | current | This attribute shall indicate the transmit power. The default value is full(0). |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.13 | ColumnaccessControlMode | read-write | current | The field indicates whether the access control list is enabled and the source of the database of the access control list. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.14 | ColumnrogueApDetection | read-write | current | This attribute shall indicate the status of Rogue AP detection. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.15 | ColumnmcsRate | read-write | current | This attribute shall indicate the transmit rate to be used in case of 11na and 11ng modes. Rate index of 0 means 15 Mbps when the channel width is 40Mhz or dyn… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.16 | ColumnguardInterval | read-write | current | This attribute shall indicate the guard interval. When set to auto(0), depending on the station type, AP selects 400ns or 800ns guard interval. The default val… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.17 | ColumnchannelWidth | read-write | current | This attribute shall set the CWM mode to 20Mhz or 40Mhz or automatically switches between 20 and 40 based on channel conditions. For 11ng mode, the default val… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.18 | Columnampdu | read-write | current | This attribute shall enable or disable AMPDU aggregation. It is enabled by default. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.19 | ColumnampduAggrLength | read-write | current | This attribute shall set the AMPDU aggregation length. The default value is 65535. |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.20 | ColumnrifsTransmission | read-write | current | This attribute sets the status of rifsTransmission. The default value of the attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.21 | ColumnapMode | read-write | current | Specifies the device operation mode. ap: device operates as an Access Point p2p: device operates as a point-to-point wireless bridge No STA are associated to t… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.22 | ColumnuapsdStatus | read-write | current | This attribute shall indicate whether wmm power save. The default value is enable(1) . |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.23 | ColumnmaxClientAssociations | read-write | current | This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.24 | ColumnrogueApDetectionPolicy | read-write | current | This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP. If it is 'mild' set it to 10sec,'moderate' sho… |
| 1.3.6.1.4.1.4526.100.7.12.2.1.1.25 | ColumnclientIsolation | read-write | current | This attribute shall indicate whether wireless clients in a BSS can communicate with each other. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.3 | NodevapSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.3.1 | TablevapSettingTable | not-accessible | current | VAP attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1 | RowvapSettingEntry | not-accessible | current | VAP attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.1 | ColumnvapIndex | read-only | current | Specifies one of the 8 VAP profiles. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.2 | ColumnvapProfileName | read-write | current | Name of this VAP profile. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.3 | ColumnvapProfileStatus | read-write | current | This attribute shall indicate the status of this VAP profile. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.4 | Columnssid | read-write | current | This attribute shall indicate SSID.Its length can't be larger than 32 . |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.5 | ColumnhideNetworkName | read-write | current | This attribute shall indicate whether to broadcast wireless network Name (SSID). The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.6 | ColumnvlanID | read-write | current | This attribute shall indicate the VLAN ID of the VAP. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.7 | ColumnclientSecuritySeperation | read-write | current | This attribute shall indicate whether wireless clients in a BSS can communicate with each other. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.8 | ColumnauthenticationType | read-write | current | The field indicates how to authenticate the station. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.9 | Columnencryption | read-write | current | The field indicates how to encrypt the packets sent to a station. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.10 | ColumnpresharedKey | read-write | current | This attribute shall indicate preshared key used in the following authenticationtype: wpapsk(16), wpa2psk(32), wpapskORwpa2psk(48). |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.11 | ColumnwepKeyType | read-write | current | The field shall indicate the type of WEP key. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.12 | ColumnwepKeyNo | read-write | current | The field indicates the number of default wep key. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.13 | ColumnwepKey1 | read-write | current | The field indicates the key value of the first default wep key. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.14 | ColumnwepKey2 | read-write | current | The field indicates the key value of the second default wep key. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.15 | ColumnwepKey3 | read-write | current | The field indicates the key value of the third default wep key. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.16 | ColumnwepKey4 | read-write | current | The field indicates the key value of the fourth default wep key. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.17 | ColumnwepPassPhrase | read-write | current | This attribute shall indicate WEP pass phrase, used to generate four WEP keys. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.18 | ColumnincomingQoSPolicy | read-write | current | This attribute shall indicate the policy index to be configured to the selected interface. |
| 1.3.6.1.4.1.4526.100.7.12.3.1.1.19 | ColumnoutgoingQoSPolicy | read-write | current | This attribute shall indicate the policy index to be configured to the selected interface. |
| 1.3.6.1.4.1.4526.100.7.12.4 | NodewdsSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.4.1 | TablewdsSettingTable | not-accessible | current | WDS attributes in tablular form to allow for multiple instances of wds setting profile. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1 | RowwdsSettingEntry | not-accessible | current | An entry in the wdsTable. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.1 | ColumnwdsIndex | read-only | current | Specifies one of the 4 wireless bridge profiles. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.2 | ColumnwdsProfileName | read-write | current | Name of the wireless bridge profile. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.3 | ColumnwdsProfileStatus | read-write | current | This attribute shall indicate the status of this wireless bridge profile. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.4 | ColumnremoteMacAddress | read-write | current | This attribute shall indicate the link partner's MAC address. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.5 | ColumnwdsAuthenticationtype | read-write | current | The field indicates how to authenticate the link partner. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.6 | ColumnwdsEncryption | read-write | current | The field indicates how to encrypt the packets sent to link partner. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.7 | ColumnwdsPresharedKey | read-write | current | This attribute shall indicate preshared key used by wpapsk or wpa2psk. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.8 | ColumnwdsWepKeyType | read-write | current | The field shall indicate the type of WEP key. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.9 | ColumnwdsWepKey | read-write | current | The field indicates the value of the WEP key. |
| 1.3.6.1.4.1.4526.100.7.12.4.1.1.10 | ColumnwdsWepPassPhrase | read-write | current | This attribute shall indicate WEP pass phrase, used to generate the WEP key. |
| 1.3.6.1.4.1.4526.100.7.12.5 | NodewmmSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.5.1 | TablewmmApEdcaSettingTable | not-accessible | current | WMM settings for AP EDCA. |
| 1.3.6.1.4.1.4526.100.7.12.5.1.1 | RowwmmApEdcaSettingEntry | not-accessible | current | AP Enhanced Distribution Channel Access Parameters |
| 1.3.6.1.4.1.4526.100.7.12.5.1.1.1 | ColumnwmmApEdcaQIndex | read-only | current | Specifies one of the 4 AP EDCA queues. 1: AC_BE 2: AC_BK 3: AC_VI 4: AC_VO |
| 1.3.6.1.4.1.4526.100.7.12.5.1.1.2 | ColumnwmmApEdcaQName | read-only | current | Queues are defined for different types of data (video or voice or data) transmitted from AP to station. AC_BE (best effort) IP data is sent to this queue. AC_B… |
| 1.3.6.1.4.1.4526.100.7.12.5.1.1.3 | ColumnwmmApEdcaAifs | read-write | current | The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time (in microseconds) for data frames. 0: 0us 1: 32us 2: 64us 3: 96us 4: 128us 5: 160us 6: 192us… |
| 1.3.6.1.4.1.4526.100.7.12.5.1.1.4 | ColumnwmmApEdcaCwMin | read-write | current | This parameter is input to the algorithm that determines the initial random backoff wait time ('window') for retry of a transmission. The value specified here … |
| 1.3.6.1.4.1.4526.100.7.12.5.1.1.5 | ColumnwmmApEdcaCwMax | read-write | current | The value specified here in the Maximum Contention Window is the upper limit (in microseconds) for the doubling of the random backoff value. This doubling cont… |
| 1.3.6.1.4.1.4526.100.7.12.5.1.1.6 | ColumnwmmApEdcaMaxBurst | read-write | current | This value specifies (in microseconds) the Maximum Burst Length allowed for packet bursts on the wireless network. A packet burst is a collection of multiple f… |
| 1.3.6.1.4.1.4526.100.7.12.5.2 | TablewmmStaEdcaSettingTable | not-accessible | current | WMM settings for STA EDCA. |
| 1.3.6.1.4.1.4526.100.7.12.5.2.1 | RowwmmStaEdcaSettingEntry | not-accessible | current | Station Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the client station to the access point |
| 1.3.6.1.4.1.4526.100.7.12.5.2.1.1 | ColumnwmmStaEdcaQIndex | read-only | current | Specifies one of the 4 STA EDCA Queues. 1: AC_BE 2: AC_BK 3: AC_VI 4: AC_VO |
| 1.3.6.1.4.1.4526.100.7.12.5.2.1.2 | ColumnwmmStaEdcaQName | read-only | current | Queues are defined for different types of data (video or voice or data) transmitted from station-to-AP. AC_BE (best effort) IP data is sent to this queue. AC_B… |
| 1.3.6.1.4.1.4526.100.7.12.5.2.1.3 | ColumnwmmStaEdcaAifs | read-write | current | The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time (in microseconds) for data frames. 0: 0us 1: 32us 2: 64us 3: 96us 4: 128us 5: 160us 6: 192us… |
| 1.3.6.1.4.1.4526.100.7.12.5.2.1.4 | ColumnwmmStaEdcaCwMin | read-write | current | This parameter is input to the algorithm that determines the initial random backoff wait time ('window') for retry of a transmission. The value specified here … |
| 1.3.6.1.4.1.4526.100.7.12.5.2.1.5 | ColumnwmmStaEdcaCwMax | read-write | current | The value specified here in the Maximum Contention Window is the upper limit (in microseconds) for the doubling of the random backoff value. This doubling cont… |
| 1.3.6.1.4.1.4526.100.7.12.5.2.1.6 | ColumnwmmStaEdcaTxopLimit | read-write | current | The Transmission Opportunity (TXOP) is an interval of time when a WMM client station has the right to initiate transmissions onto the wireless medium (WM). Thi… |
| 1.3.6.1.4.1.4526.100.7.12.6 | NoderemoteSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.6.1 | ScalarinactivityTimeOut | read-write | current | This attribute shall indicate the session inactivity time after which the session will be terminated. This is applicable to Telnet, SSH and HTTP sessions. Defa… |
| 1.3.6.1.4.1.4526.100.7.12.6.2 | ScalarsshStatus | read-write | current | This attribute shall indicate the SSH daemon status. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.6.3 | ScalartelnetStatus | read-write | current | This attribute shall indicate the telnet daemon status. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.6.4 | ScalarsnmpStatus | read-write | current | This attribute shall indicate the SNMP agent status. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.6.5 | ScalartrapServerIP | read-write | current | The field indicates the trap server IP address. |
| 1.3.6.1.4.1.4526.100.7.12.6.6 | ScalartrapPort | read-write | current | The field indicates the trap port. The default value of this variable is 162. |
| 1.3.6.1.4.1.4526.100.7.12.6.7 | ScalartrapServerCommunity | read-write | current | The field indicates the community name for traps. |
| 1.3.6.1.4.1.4526.100.7.12.6.8 | ScalarreadOnlyCommunity | read-write | current | The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string. |
| 1.3.6.1.4.1.4526.100.7.12.6.9 | ScalarreadWriteCommunity | read-write | current | The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string. |
| 1.3.6.1.4.1.4526.100.7.12.7 | Nodestatistic | |||
| 1.3.6.1.4.1.4526.100.7.12.7.1 | NodewiredEthernetStat | |||
| 1.3.6.1.4.1.4526.100.7.12.7.1.1 | ScalarlanRecvPacket | read-only | current | the field indicates the sum of received packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.1.2 | ScalarlanTransPacket | read-only | current | the field indicates the sum of transmitted packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.1.3 | ScalarlanRecvBytes | read-only | current | the field indicates the sum of received bytes. |
| 1.3.6.1.4.1.4526.100.7.12.7.1.4 | ScalarlanTransBytes | read-only | current | the field indicates the sum of transmitted bytes. |
| 1.3.6.1.4.1.4526.100.7.12.7.1.5 | ScalarlanRecvPayloadBytes | read-only | current | The field indicates the total sum of the ethernet bytes received excluding to the ap. |
| 1.3.6.1.4.1.4526.100.7.12.7.1.6 | ScalarlanTransPayloadBytes | read-only | current | The field indicates the total sum of the ethernet bytes transmitted excluding from the ap. |
| 1.3.6.1.4.1.4526.100.7.12.7.1.7 | ScalarlanPacketErrorRateTotal | read-only | current | The field indicates the total sum of the received error ethernet packets rate |
| 1.3.6.1.4.1.4526.100.7.12.7.1.8 | ScalarlanWrongPackets | read-only | current | the field indicates the sum of wrong Ethernet packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2 | TablewirelessStatTable | not-accessible | current | Wireless interface statistics table. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1 | RowwirelessStatEntry | not-accessible | current | Wireless interface statistics. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.1 | ColumnwlanRecvUnicastPacket | read-only | current | the field indicates the sum of received unicast packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.2 | ColumnwlanTransUnicastPacket | read-only | current | the field indicates the sum of transmitted unicast packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.3 | ColumnwlanRecvBroadcastPacket | read-only | current | the field indicates the sum of received broadcast packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.4 | ColumnwlanTransBroadcastPacket | read-only | current | the field indicates the sum of transmitted broadcast packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.5 | ColumnwlanRecvMulticastPacket | read-only | current | the field indicates the sum of received multicast packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.6 | ColumnwlanTransMulticastPacket | read-only | current | the field indicates the sum of transmitted multicast packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.7 | ColumnwlanRecvPacket | read-only | current | the field indicates the sum of received packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.8 | ColumnwlanTransPacket | read-only | current | the field indicates the sum of transmitted packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.9 | ColumnwlanRecvBytes | read-only | current | the field indicates the sum of received bytes. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.10 | ColumnwlanTransBytes | read-only | current | the field indicates the sum of transmitted bytes. |
| 1.3.6.1.4.1.4526.100.7.12.7.2.1.11 | ColumnwlanWrongSTAPackets | read-only | current | the field indicates the sum of wlan wrong station packets. |
| 1.3.6.1.4.1.4526.100.7.12.7.3 | NodehostResourceStat | |||
| 1.3.6.1.4.1.4526.100.7.12.7.3.1 | ScalarhrSysCpuUtilizationRate | read-only | current | the field indicates the percentage of cpu Utilization Rate . |
| 1.3.6.1.4.1.4526.100.7.12.7.3.2 | ScalarhrSysWlanUtilizationRate | read-only | current | the field indicates the wlan Utilization Rate based on calculating station access Time. |
| 1.3.6.1.4.1.4526.100.7.12.7.3.3 | ScalarhrSysTotalMemorySize | read-only | current | The field indicates the total memory size of the system in kiloBytes. |
| 1.3.6.1.4.1.4526.100.7.12.7.3.4 | ScalarhrSysFreeMemorySize | read-only | current | The field indicates the current free memory size of the system in kiloBytes. |
| 1.3.6.1.4.1.4526.100.7.12.7.3.5 | ScalarhrSysUpTime | read-only | current | The field indicates the time (in hundredths of a second) since the system(Ap) was last re-initialized. |
| 1.3.6.1.4.1.4526.100.7.12.7.3.6 | ScalarhrSysIdleTime | read-only | current | The field indicates the time (in hundredths of a second) the system has spent idle. |
| 1.3.6.1.4.1.4526.100.7.12.7.4 | TableradioStatusTable | not-accessible | current | List of virtual access point in a tabular form. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1 | RowradioStatusEntry | not-accessible | current | An entry in the radioStatusTable. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.1 | ColumnnumberOfStations | read-only | current | This field indicates number of stations associated with wlan . |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.2 | ColumnwlanRxPacketsTotal | read-only | current | The field indicates the total sum of the packets received. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.3 | ColumnwlanRxBytesTotal | read-only | current | The field indicates the total sum of the bytes received. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.4 | ColumnwlanTxPacketsTotal | read-only | current | The field indicates the total sum of the packets sent. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.5 | ColumnwlanTxBytesTotal | read-only | current | The field indicates the total sum of the bytes sent. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.6 | ColumnwlanDiscardPacketsTotal | read-only | current | The field indicates the total sum of the packets discard. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.7 | ColumnwlanTxPacketFailTotal | read-only | current | The field indicates the total sum of the packets which failed to send. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.8 | ColumnwlanTxRetryTotal | read-only | current | The field indicates the total sum of the packets which retry to send. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.9 | ColumnwlanFcsFailCntTotal | read-only | current | The field indicates the total sum of the packets receved which FCS is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.10 | ColumnwlanRtsFailCntTotal | read-only | current | The field indicates the total sum of the packets receved which RTS is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.11 | ColumnwlanAckFailCntTotal | read-only | current | The field indicates the total sum of the packets receved which ACK is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.12 | ColumnwlanCrcErrorTotal | read-only | current | The field indicates the total sum of the packets receved which CRC is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.13 | ColumnwlanPhyErrorTotal | read-only | current | The field indicates the total sum of the packets receved which PHY is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.14 | ColumnwlanMicErrorTotal | read-only | current | The field indicates the total sum of the packets receved which MIC is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.15 | ColumnwlanKeyErrorTotal | read-only | current | The field indicates the total sum of the packets receved which KEY is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.16 | ColumnwlanTxFifoErrorTotal | read-only | current | The field indicates the total sum of the packets transmit which FIFO is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.17 | ColumnwlanRxFifoErrorTotal | read-only | current | The field indicates the total sum of the packets recieved which FIFO is error. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.18 | ColumnwlanTxPayloadBytesTotal | read-only | current | The field indicates the total sum of the wlan packets sent excluding from the ap. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.19 | ColumnwlanRxPayloadBytesTotal | read-only | current | The field indicates the total sum of the wlan packets received excluding to the ap. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.20 | ColumnwlanPacketErrorRateTotal | read-only | current | The field indicates the total sum of the received error wlan packets rate. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.21 | ColumnwlanAuthRequestTotal | read-only | current | The field indicates the total sum of the authentiacation request from the station. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.22 | ColumnwlanAuthResponseTotal | read-only | current | The field indicates the total sum of the authentiacation response to the station. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.23 | ColumnwlanSuccessConnectTotal | read-only | current | The field indicates the total sum of the successful connection . |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.24 | ColumnwlanAbnormalDisconnectTotal | read-only | current | The filed indicates the total sum of the abnormal disconnect. |
| 1.3.6.1.4.1.4526.100.7.12.7.4.1.25 | ColumnwlanNormalDisconnectTotal | read-only | current | The filed indicates the total sum of the normal disconnect. |
| 1.3.6.1.4.1.4526.100.7.12.7.5 | TablevapStatusTable | not-accessible | current | List of virtual access point in a tabular form. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1 | RowvapStatusEntry | not-accessible | current | An entry in the vapStatusTable. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.1 | ColumnvapStatIndex | read-only | current | Specifies one of the 8 VAP profiles. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.2 | ColumntxByteCount | read-only | current | This attribute shall indicate transmitted bytes by the VAP . |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.3 | ColumntxFrameCount | read-only | current | This attribute shall indicate transmitted frames by the VAP . |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.4 | ColumnrxByteCount | read-only | current | This attribute shall indicate the recieved bytes by the VAP . |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.5 | ColumnrxFrameCount | read-only | current | This attribute shall indicate the recieved bytes by the VAP . |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.6 | ColumntxPayloadBytes | read-only | current | the field indicates the sum of send bytes excluding from the ap. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.7 | ColumnrxPayloadBytes | read-only | current | the field indicates the sum of received bytes excluding to the ap. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.8 | ColumnnumberOfClients | read-only | current | This attribute shall indicate number of clients associated with VAP . |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.9 | ColumnclientsAuthRequestTotal | read-only | current | The field indicates the total sum of the authentiacation request from the station. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.10 | ColumnclientsAuthResponseTotal | read-only | current | The field indicates the total sum of the authentiacation response to the station. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.11 | ColumnclientsSuccessConnectTotal | read-only | current | The field indicates the total sum of the successful connection . |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.12 | ColumnclientsAbnormalDisconnectTotal | read-only | current | The filed indicates the total sum of the abnormal disconnect. |
| 1.3.6.1.4.1.4526.100.7.12.7.5.1.13 | ColumnclientsNormalDisconnectTotal | read-only | current | The filed indicates the total sum of the normal disconnect. |
| 1.3.6.1.4.1.4526.100.7.12.7.6 | TableidsIpsStatusTable | not-accessible | current | List of virtual access point in a tabular form. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1 | RowidsIpsStatusEntry | not-accessible | current | An entry in the idsIpsStatusTable. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.1 | ColumnauthenticationFloodAttackCount | read-only | current | the field indicates the authentication flood attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.2 | ColumnassociationFloodAttackCount | read-only | current | the field indicates the association flood attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.3 | ColumnunauthenticatedAssociationAttackCount | read-only | current | the field indicates the unauthenticated association attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.4 | ColumnassociationTableOverflowAttackCount | read-only | current | the field indicates the association table overflow attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.5 | ColumnauthenticationFailureAttackCount | read-only | current | the field indicates the authentication failure attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.6 | ColumndeauthenticationBroadcastAttackCount | read-only | current | the field indicates the deauthentication broadcast attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.7 | ColumndisassociationBroadcastAttackCount | read-only | current | the field indicates the disassociation broadcast attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.8 | Columnmalformed802dot11PacketAttackCount | read-only | current | the field indicates the malformed802dot11Packet attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.9 | ColumneapolStartAttackCount | read-only | current | the field indicates the EAPOL Start attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.10 | ColumneapolLogOffAttackCount | read-only | current | the field indicates the EAPOL LogOff attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.11 | ColumnprematureEAPFailureAttackCount | read-only | current | the field indicates the premature EAPFailure attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.12 | ColumnprematureEAPSuccessAttackCount | read-only | current | the field indicates the premature EAPSuccess attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.13 | ColumnctsFloodAttackCount | read-only | current | the field indicates the CTS flood attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.14 | ColumnrtsFloodAttackCount | read-only | current | the field indicates the RTS flood attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.15 | ColumnrfJammingAttackCount | read-only | current | the field indicates the rfJamming attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.16 | ColumnvirtualCarrierAttackCount | read-only | current | the field indicates the virtualCarrier attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.17 | ColumnmacSpoofingAttackCount | read-only | current | the field indicates the macSpoofing attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.18 | ColumnrogueApDetectionAttackCount | read-only | current | the field indicates the rogueApDetection attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.19 | ColumnapPropertyChangedAttackCount | read-only | current | the field indicates the apProperty changed attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.20 | ColumndeviceProbingAPAttackCount | read-only | current | the field indicates the device probing AP attack count. |
| 1.3.6.1.4.1.4526.100.7.12.7.6.1.21 | ColumnpsPollFloodAttackCount | read-only | current | the field indicates the PS poll flood attack count. |
| 1.3.6.1.4.1.4526.100.7.12.8 | NodestationList | |||
| 1.3.6.1.4.1.4526.100.7.12.8.1 | TablestationListTable | not-accessible | current | List of associated stations in a tabular form. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1 | RowstationListEntry | not-accessible | current | An entry in the stationListTable. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.1 | ColumnmacAddress | read-only | current | This attribute shall indicate MAC address of the associated stationID. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.2 | ColumnclientIpaddr | read-only | current | This attribute shall indicate IP address of the associated stationID. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.3 | ColumnassociationTime | read-only | current | This attribute shall indicate ssid of the VAP to which the station is associated. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.4 | ColumnclientWirelessMode | read-only | current | This attribute shall indicate the wireless mode of the associated stationID. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.5 | ColumnassociatedSsid | read-only | current | This attribute shall indicate ssid of the VAP to which the station is associated. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.6 | ColumnassociatedBssid | read-only | current | This attribute shall indicate bssid of the VAP to which the station is associated. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.7 | ColumnassociatedSNR | read-only | current | This attribute shall indicate the noise margin of Ap with respect to the its recieved signal from station. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.8 | ColumnclientChannelWidth | read-only | current | This attribute shall indicate the channel width for the associated station in 11n mode. Not applicable for a station in 11a/b/g mode. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.9 | ColumnstationStatus | read-only | current | This attribute shall indicate the status of station. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.10 | ColumnstationRssi | read-only | current | Receive Signal Strength Indicator. This attribute shall indicate the strength of an incomming signal of station. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.11 | ColumnidleTime | read-only | current | This attribute shall indicate the Idle time of station. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.12 | ColumnstationChannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.13 | ColumntxDataRate | read-only | current | This attribute shall indicate the TX DataRate. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.14 | ColumnrxDataRate | read-only | current | This attribute shall indicate the Rx DataRate. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.15 | ColumnstationState | read-only | current | This attribute shall indicate the station State. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.16 | ColumnstationAuthenticationType | read-only | current | This attribute shall indicates how to authenticate the station. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.17 | ColumnstationAID | read-only | current | This attribute shall indicate the association ID value assigned by the AP to identify the association. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.18 | ColumnstationTxSeq | read-only | current | This attribute shall indicate the Transmit Sequence of the station. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.19 | ColumnstationRxSeq | read-only | current | This attribute shall indicate the Receive Sequence of the station. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.20 | ColumnstationCapability | read-only | current | This attribute shall indicate the capability of station associated. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.21 | ColumnstationCipher | read-only | current | This attribute shall indicate the Cipher of station associated. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.22 | ColumnstationRecvPayloadBytes | read-only | current | This attribute shall indicate the count of the payload bytes received from the wireless client. |
| 1.3.6.1.4.1.4526.100.7.12.8.1.1.23 | ColumnstationTransPayloadBytes | read-only | current | This attribute shall indicate the count of the payload bytes sent to the wireless client. |
| 1.3.6.1.4.1.4526.100.7.12.9 | Nodeinfo802dot1x | |||
| 1.3.6.1.4.1.4526.100.7.12.9.1 | Nodeauthinfo | |||
| 1.3.6.1.4.1.4526.100.7.12.9.1.1 | ScalarpriRadIpAddr | read-write | current | Internet address of the Primary Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.9.1.2 | ScalarpriRadPort | read-write | current | Port number used for authentication at the Primary Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.9.1.3 | ScalarpriRadSharedSecret | read-write | current | Secret shared between NAS and the Primary Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.9.1.4 | ScalarsndRadIpAddr | read-write | current | Internet address of the Second Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.9.1.5 | ScalarsndRadPort | read-write | current | Port number used for authentication at the Second Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.9.1.6 | ScalarsndRadSharedSecret | read-write | current | Secret shared between NAS and the Second Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.9.2 | Nodeaccntinfo | |||
| 1.3.6.1.4.1.4526.100.7.12.9.2.1 | ScalarpriAcntIpAddr | read-write | current | IP address of the Primary radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.9.2.2 | ScalarpriAcntPort | read-write | current | port number of the Primary radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.9.2.3 | ScalarpriAcntSharedSecret | read-write | current | password used by the ap to connect to the Primary radius account serve. |
| 1.3.6.1.4.1.4526.100.7.12.9.2.4 | ScalarsndAcntIpAddr | read-write | current | IP address of the Second radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.9.2.5 | ScalarsndAcntPort | read-write | current | port number of the Second radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.9.2.6 | ScalarsndAcntSharedSecret | read-write | current | password used by the ap to connect to the Second radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.9.3 | NodeauthSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.9.3.1 | ScalarreauthTime | read-write | current | This attribute shall indicate 802.1x reauth time. |
| 1.3.6.1.4.1.4526.100.7.12.9.3.2 | ScalarwpaGroupKeyUpdateCondition | read-write | current | This attribute shall indicate WPA group key update condition. |
| 1.3.6.1.4.1.4526.100.7.12.9.3.3 | ScalarwpaGroupKeyUpdateIntervalSecond | read-write | current | This fields indicates the wpa keyupdate sec interval. |
| 1.3.6.1.4.1.4526.100.7.12.10 | NodeuserCommand | |||
| 1.3.6.1.4.1.4526.100.7.12.10.1 | ScalarresetAP | read-write | current | Setting this object causes the device to reboot. The actual value is ignored. |
| 1.3.6.1.4.1.4526.100.7.12.10.2 | ScalarfirmwareUpgrade | read-write | current | Setting this object to the name of a file, causes the device to download <upgrade URL>/<file>.Run the HTTPd in the remote machine After the file is downloaded,… |
| 1.3.6.1.4.1.4526.100.7.12.10.3 | ScalarbackupSettings | read-write | current | Setting this object to the hostname username password and name of a file, causes the running config to be saved to the file. ipAddress username password filena… |
| 1.3.6.1.4.1.4526.100.7.12.10.4 | ScalarrestoreSettings | read-write | current | Setting this object to the hostname username password and name of a file, causes the device to download the file .After the file is downloaded, it is copied to… |
| 1.3.6.1.4.1.4526.100.7.12.10.5 | ScalarrestoreFactoryDefaults | read-write | current | Setting this object causes the device to restore factory default settings. The actual value is ignored. |
| 1.3.6.1.4.1.4526.100.7.12.10.6 | ScalarrestoreDefaultPassword | read-write | current | Setting this object causes the device to restore the default administrator password. |
| 1.3.6.1.4.1.4526.100.7.12.11 | NodetimeSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.11.1 | ScalarcurrentTime | read-only | current | This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss. |
| 1.3.6.1.4.1.4526.100.7.12.11.2 | ScalartimeZone | read-write | current | This field indicates the time zone of the system. |
| 1.3.6.1.4.1.4526.100.7.12.11.3 | ScalarntpClientStatus | read-write | current | Indicates whether the NTP client is enabled. |
| 1.3.6.1.4.1.4526.100.7.12.11.4 | ScalarcustomNtpServer | read-write | current | Indicates whether custom NTP server is to be used. |
| 1.3.6.1.4.1.4526.100.7.12.11.5 | ScalarntpAddr | read-write | current | Indicates the address or domain name of the NTP server. |
| 1.3.6.1.4.1.4526.100.7.12.12 | NodedhcpsSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.12.1 | ScalardhcpServerStatus | read-write | current | This attribute shall indicate the status of DHCP server. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.12.2 | ScalardhcpsVlanId | read-write | current | This attribute indicates the VLAN ID of DHCP server's VLAN. Default value of DHCP server's VLAN ID is 1. |
| 1.3.6.1.4.1.4526.100.7.12.12.3 | ScalardhcpsIpStart | read-write | current | This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.4 | ScalardhcpsIpEnd | read-write | current | This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.5 | ScalardhcpsNetMask | read-write | current | This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.6 | ScalardhcpsGateway | read-write | current | This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.7 | ScalardhcpsPriDns | read-write | current | This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.8 | ScalardhcpsSndDns | read-write | current | This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.9 | ScalardhcpsPriWins | read-write | current | This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.10 | ScalardhcpsSndWins | read-write | current | This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.12.12.11 | ScalardhcpsLeaseTime | read-write | current | This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes. The default value is 1 day (1440 minutes). |
| 1.3.6.1.4.1.4526.100.7.12.13 | NodelogSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.13.1 | ScalarsyslogStatus | read-write | current | This attribute shall indicate the status of syslog. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.13.2 | ScalarsyslogSrvIp | read-write | current | This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IPv4 & IPv6 address. |
| 1.3.6.1.4.1.4526.100.7.12.13.3 | ScalarsyslogSrvPort | read-write | current | This attributes shall indicates the Port of the Syslog server. The default value of syslog server port is 514. |
| 1.3.6.1.4.1.4526.100.7.12.14 | NodehttpRedirectSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.14.1 | ScalarhttpRedirectStatus | read-write | current | When enabled, redirects the first HTTP request from a client to an external hotspot server. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.14.2 | ScalarhttpRedirectURL | read-write | current | Initial HTTP requests from the client will be redirected to this external web server. |
| 1.3.6.1.4.1.4526.100.7.12.15 | NodeapList | |||
| 1.3.6.1.4.1.4526.100.7.12.15.1 | TabledetectedApTable | not-accessible | current | detectedAp Table shows list of detected neighbouring APs. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1 | RowdetectedApEntry | not-accessible | current | An entry in the detectedApTable. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.1 | ColumnapMac | read-only | current | This attribute shall indicate MAC address of the detected AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.2 | ColumnapSsid | read-only | current | This attribute shall indicate ssid of the detected AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.3 | ColumnapPrivacy | read-only | current | This attribute shall indicate whether privacy is enabled. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.4 | ColumnapBand | read-only | current | This attribute shall indicate the operating band of detected AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.5 | ColumnapChannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.6 | ColumnapRate | read-only | current | This attribute shall indicate the rate. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.7 | ColumnapBeaconInterval | read-only | current | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.8 | ColumnapNumBeacons | read-only | current | This attribute shall indicate the number of beacons received. |
| 1.3.6.1.4.1.4526.100.7.12.15.1.1.9 | ColumnapLastBeacon | read-only | current | This attribute shall indicate the time of the last beacon. |
| 1.3.6.1.4.1.4526.100.7.12.15.2 | TableknownApTable | not-accessible | current | knownAp Table shows list of known APs. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1 | RowknownApEntry | not-accessible | current | An entry in the knownApTable. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.1 | ColumnknownApMac | read-only | current | This attribute shall indicate MAC address of the known AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.2 | ColumnknownApSsid | read-only | current | This attribute shall indicate ssid of the known AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.3 | ColumnknownApPrivacy | read-only | current | This attribute shall indicate whether privacy is enabled. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.4 | ColumnknownApBand | read-only | current | This attribute shall indicate the operating band of known AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.5 | ColumnknownApChannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.6 | ColumnknownApRate | read-only | current | This attribute shall indicate the rate. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.7 | ColumnknownApBeaconInterval | read-only | current | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.8 | ColumnknownApNumBeacons | read-only | current | This attribute shall indicate the number of beacons received. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.9 | ColumnknownApLastBeacon | read-only | current | This attribute shall indicate the time of the last beacon. |
| 1.3.6.1.4.1.4526.100.7.12.15.2.1.10 | ColumnknownApEntryStatus | read-create | current | The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.4526.100.7.12.15.3 | TableunknownApTable | not-accessible | current | unknownAp Table shows list of unknown APs. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1 | RowunknownApEntry | not-accessible | current | An entry in the unknownApTable. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.1 | ColumnunknownApMac | read-only | current | This attribute shall indicate MAC address of the unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.2 | ColumnunknownApSsid | read-only | current | This attribute shall indicate ssid of the unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.3 | ColumnunknownApPrivacy | read-only | current | This attribute shall indicate whether privacy is enabled. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.4 | ColumnunknownApBand | read-only | current | This attribute shall indicate the operating band of unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.5 | ColumnunknownApChannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.6 | ColumnunknownApRate | read-only | current | This attribute shall indicate the rate. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.7 | ColumnunknownApBeaconInterval | read-only | current | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.8 | ColumnunknownApNumBeacons | read-only | current | This attribute shall indicate the number of beacons received. |
| 1.3.6.1.4.1.4526.100.7.12.15.3.1.9 | ColumnunknownApLastBeacon | read-only | current | This attribute shall indicate the time of the last beacon. |
| 1.3.6.1.4.1.4526.100.7.12.16 | NodeaccessControlSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.16.1 | TablewlanAccessControlLocalTable | not-accessible | current | ACL attributes in tablular form to allow for multiple instances on an agent. |
| 1.3.6.1.4.1.4526.100.7.12.16.1.1 | RowwlanAccessControlLocalEntry | not-accessible | current | An entry in the wlanAccessControlLocalTable. |
| 1.3.6.1.4.1.4526.100.7.12.16.1.1.1 | ColumnaclMAC | read-only | current | This field should indicate an MAC address entry in the access control local database. |
| 1.3.6.1.4.1.4526.100.7.12.16.1.1.2 | ColumnaclMacStatus | read-create | current | The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.4526.100.7.12.17 | Nodetraps | |||
| 1.3.6.1.4.1.4526.100.7.12.17.1 | NoderogueApDetectionTrap | |||
| 1.3.6.1.4.1.4526.100.7.12.17.1.1 | NotificationrogueApDetectionNotification | current | This trap shall notify detection of an unknown AP. | |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2 | NoderogueApDetectionObjects | |||
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.1 | ScalarrogueApDetectionMacAddr | accessible-for-notify | current | This object contains the MAC address of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.2 | ScalarrogueApDetectionSsid | accessible-for-notify | current | This object contains the SSID of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.3 | ScalarrogueApDetectionPrivacy | accessible-for-notify | current | This object contains the privacy option for the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.4 | ScalarrogueApDetectionBand | accessible-for-notify | current | This object contains the operating band of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.5 | ScalarrogueApDetectionChannel | accessible-for-notify | current | This object contains the operating channel of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.6 | ScalarrogueApDetectionRate | accessible-for-notify | current | This object contains the data rate of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.7 | ScalarrogueApDetectionBeaconInt | accessible-for-notify | current | This object contains the beacon interval of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.8 | ScalarrogueApDetectionNumBeacon | accessible-for-notify | current | This object contains the number of beacons sent by the detected unknown AP during the scan interval. |
| 1.3.6.1.4.1.4526.100.7.12.17.1.2.9 | ScalarrogueApDetectionLastBeacon | accessible-for-notify | current | This object contains the time at which last beacon was sent by the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.12.17.2 | NodemaxStationTrap | |||
| 1.3.6.1.4.1.4526.100.7.12.17.2.1 | NotificationmaxStationNotification | current | This trap shall notify reaching the max station limit. | |
| 1.3.6.1.4.1.4526.100.7.12.17.2.2 | NodemaxStationObjects | |||
| 1.3.6.1.4.1.4526.100.7.12.17.2.2.1 | ScalarmaxStationMacAddr | accessible-for-notify | current | This object contains the MAC address of the interface on which max station limit reached. |
| 1.3.6.1.4.1.4526.100.7.12.17.2.2.2 | ScalarmaxStationBand | accessible-for-notify | current | This object contains the operating band of the interface on which max station limit reached. |
| 1.3.6.1.4.1.4526.100.7.12.17.3 | NodeaclMismatchTrap | |||
| 1.3.6.1.4.1.4526.100.7.12.17.3.1 | NotificationaclMismatchNotification | current | This trap shall notify the denial of a station. | |
| 1.3.6.1.4.1.4526.100.7.12.17.3.2 | NodeaclMismatchObjects | |||
| 1.3.6.1.4.1.4526.100.7.12.17.3.2.1 | ScalaraclMismatchMacAddr | accessible-for-notify | current | This object contains the MAC address of the station which was denied association request due to ACL mismatch. |
| 1.3.6.1.4.1.4526.100.7.12.17.3.2.2 | ScalaraclMismatchBssid | accessible-for-notify | current | This object contains BSSID of the VAP on which the station was denied association request due to ACL mismatch. |
| 1.3.6.1.4.1.4526.100.7.12.17.3.2.3 | ScalaraclMismatchSsid | accessible-for-notify | current | This object contains the SSID of the VAP on which the station was denied association request due to ACL mismatch. |
| 1.3.6.1.4.1.4526.100.7.12.17.4 | NodenoBeaconTrap | |||
| 1.3.6.1.4.1.4526.100.7.12.17.4.1 | NotificationnoBeaconNotification | current | This trap shall notify no outgoing beacons. | |
| 1.3.6.1.4.1.4526.100.7.12.17.4.2 | NodenoBeaconObjects | |||
| 1.3.6.1.4.1.4526.100.7.12.17.4.2.1 | ScalarnoBeaconBssid | accessible-for-notify | current | This object contains BSSID of the VAP for which the watch dog timer detected no outgoing beacons. |
| 1.3.6.1.4.1.4526.100.7.12.18 | NodeidsIpsMailSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.18.1 | ScalarmailSender | read-write | current | indicated the mail sender address. |
| 1.3.6.1.4.1.4526.100.7.12.18.2 | ScalarsmtpServerIP | read-write | current | The field indicates the smtp server IP address. |
| 1.3.6.1.4.1.4526.100.7.12.18.3 | ScalarsmtpPort | read-write | current | The field indicates the smtp port. The default value of this variable is 25. |
| 1.3.6.1.4.1.4526.100.7.12.18.4 | ScalarsmtpServerAuthStatus | read-write | current | This attribute shall indicate the smtp server authentication status. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.18.5 | ScalarsendNotifications | read-write | current | indicated the destination mail address. |
| 1.3.6.1.4.1.4526.100.7.12.18.6 | Scalarusername | read-write | current | indicated the source mail address |
| 1.3.6.1.4.1.4526.100.7.12.18.7 | Scalarpassword | read-write | current | indicated the source mail password |
| 1.3.6.1.4.1.4526.100.7.12.19 | NodeidsIpsSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.19.1 | TableidsIpsSettingTable | not-accessible | current | IPS settings table. |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1 | RowidsIpsSettingEntry | not-accessible | current | An entry in the idsIpsSettingTable. Each idsIpsSettingEntry represents a IPS profile (2.4GHz band or 5GHz band). On a single radio device, the same wireless in… |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.1 | ColumnidsIpsIndex | read-only | current | Specifies one of the 2 IPS profiles. |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.2 | ColumnidsIpsStatus | read-write | current | This attribute shall indicate the status of idsIps. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.3 | ColumnidsIpsDetectionPolicy | read-write | current | This attribute shall indicates the status of IPS detection policy in which frequency AP scans the Rogue AP. If it is 'mild' set it to 10sec,'moderate' should b… |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.4 | ColumnauthenticationFloodAttackStatus | read-write | current | This attribute shall indicate the status of authentication flood attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.5 | ColumnassociationFloodAttackStatus | read-write | current | This attribute shall indicate the status of association flood attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.6 | ColumnunauthenticatedAssociationAttackStatus | read-write | current | This attribute shall indicate the status of unauthenticated association attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.7 | ColumnassociationTableOverflowAttackStatus | read-write | current | This attribute shall indicate the status of association table overflow attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.8 | ColumnauthenticationFailureAttackStatus | read-write | current | This attribute shall indicate the status of authentication failure attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.9 | ColumndeauthenticationBroadcastAttackStatus | read-write | current | This attribute shall indicate the status of deauthentication broadcast attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.10 | ColumndisassociationBroadcastAttackStatus | read-write | current | This attribute shall indicate the status of disassociation broadcast Attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.11 | Columnmalformed802dot11PktDetectionAttackStatus | read-write | current | This attribute shall indicate the status of malformed802dot11 pkt detection attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.12 | ColumneapolStartAttackStatus | read-write | current | This attribute shall indicate the status of EAPOL start attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.13 | ColumneapolLogoffAttackStatus | read-write | current | This attribute shall indicate the status of EAPOL Logoff attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.14 | ColumnprematureEAPFailureAttackStatus | read-write | current | This attribute shall indicate the status of premature EAP failure attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.15 | ColumnprematureEAPSuccessAttackStatus | read-write | current | This attribute shall indicate the status of premature EAP success attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.16 | ColumnctsFloodAttackStatus | read-write | current | This attribute shall indicate the status of CTS flood attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.17 | ColumnrtsFloodAttackStatus | read-write | current | This attribute shall indicate the status of RTS flood attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.18 | ColumnrfJammingAttackStatus | read-write | current | This attribute shall indicate the status of rfJamming attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.19 | ColumnvirtualCarrierAttackStatus | read-write | current | This attribute shall indicate the status of virtual carrier attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.20 | ColumnmacSpoofingAttackStatus | read-write | current | This attribute shall indicate the status of mac spoofing attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.21 | ColumnrogueApDetectionAttackStatus | read-write | current | This attribute shall indicate the status of rogue AP detection attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.22 | ColumnadhocNetworkDetectedAttackStatus | read-write | current | This attribute shall indicate the status of ADHOC network detected attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.23 | ColumnadhocWiredConnectivityAttackStatus | read-write | current | This attribute shall indicate the status of ADHOC wired connectivity attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.24 | ColumnknownClientAssociationAdhocNwAttackStatus | read-write | current | This attribute shall indicate the status of known client association ADHOC network attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.25 | ColumnapPropertyChangedAttackStatus | read-write | current | This attribute shall indicate the status of AP property changed attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.26 | ColumndeviceProbingAttackStatus | read-write | current | This attribute shall indicate the status of device probing attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.1.1.27 | ColumnpsPollFloodAttackStatus | read-write | current | This attribute shall indicate the status of PS poll flood attack. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.12.19.2 | TableidsIpsThresholdTable | not-accessible | current | IPS threshold table. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1 | RowidsIpsThresholdEntry | not-accessible | current | An entry in the idsIpsThresholdTable. Each idsIpsThresholdEntry represents a idsIpsThreshold profile (2.4GHz band or 5GHz band). On a single radio device, the … |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.1 | ColumnauthenticationFloodThreshold | read-only | current | The field indicates the authentication flood threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.2 | ColumnassociationFloodThreshold | read-only | current | The field indicates the association flood threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.3 | ColumnunauthenticatedAssociationAttackThreshold | read-only | current | The field indicates the unauthenticated association attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.4 | ColumnassociationTableOverflowAttackThreshold | read-only | current | The field indicates the association table overflow attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.5 | ColumnauthenticationFailureAttackThreshold | read-only | current | The field indicates the authentication failure attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.6 | ColumndeauthenticationBroadcastAttackThreshold | read-only | current | The field indicates the deauthentication broadcast attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.7 | ColumndisassociationBroadcastAttackThreshold | read-only | current | The field indicates the disassociation broadcast attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.8 | Columnmalformed802dot11PktDetectionAttackThreshold | read-only | current | The field indicates the malformed802dot11 pkt detection attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.9 | ColumneapolStartAttackThreshold | read-only | current | The field indicates the EAPOL start attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.10 | ColumneapolLogoffAttackThreshold | read-only | current | The field indicates the EAPOL Logoff attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.11 | ColumnprematureEAPFailureAttackThreshold | read-only | current | The field indicates the premature EAP failure attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.12 | ColumnprematureEAPSuccessAttackThreshold | read-only | current | The field indicates the premature EAP success attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.13 | ColumnctsFloodAttackThreshold | read-only | current | The field indicates the CTS flood attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.14 | ColumnrtsFloodAttackThreshold | read-only | current | The field indicates the RTS flood attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.15 | ColumnrfJammingAttackThreshold | read-only | current | The field indicates the rfJamming attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.16 | ColumnvirtualCarrierAttackThreshold | read-only | current | The field indicates the virtual carrier attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.17 | ColumnmacSpoofingAttackThreshold | read-only | current | The field indicates the macSpoofing attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.18 | ColumnrogueApDetectionAttackThreshold | read-only | current | The field indicates the rogue AP detection attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.19 | ColumnadhocNetworkDetectedAttackThreshold | read-only | current | The field indicates the ADHOC network detected attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.20 | ColumnadhocWiredConnectivityAttackThreshold | read-only | current | The field indicates the ADHOC wired connectivity attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.21 | ColumnknownClientAssociationAdhocNwAttackThreshold | read-only | current | The field indicates the known client association ADHOC n/w attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.22 | ColumnapPropertyChangedAttackThreshold | read-only | current | The field indicates the AP property changed attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.23 | ColumndeviceProbingAttackThreshold | read-only | current | The field indicates the device probing attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.19.2.1.24 | ColumnpsPollFloodAttackThreshold | read-only | current | The field indicates the PS poll flood attack threshold. |
| 1.3.6.1.4.1.4526.100.7.12.20 | NodeqosSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.20.1 | TableqosSettingTable | not-accessible | current | QoS attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.20.1.1 | RowqosSettingEntry | not-accessible | current | QoS attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.20.1.1.1 | ColumnqosIndex | read-only | current | Specifies one of the 8 QoS profiles. |
| 1.3.6.1.4.1.4526.100.7.12.20.1.1.2 | ColumnqosProfileName | read-write | current | Name of this QoS profile. |
| 1.3.6.1.4.1.4526.100.7.12.20.1.1.3 | ColumnqosProfileStatus | read-write | current | Status of this QoS profile. |
| 1.3.6.1.4.1.4526.100.7.12.20.1.1.4 | ColumnqosProfileBitRate | read-write | current | Bit rate of this QoS profile. |
| 1.3.6.1.4.1.4526.100.7.12.20.1.1.5 | ColumnqosProfileBurstRate | read-write | current | Burst rate of this QoS profile. |
| 1.3.6.1.4.1.4526.100.7.12.20.2 | TableqosMatchFieldTable | not-accessible | current | QoS match-field attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1 | RowqosMatchFieldEntry | not-accessible | current | QoS match-field attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.1 | ColumnmatchField0 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.2 | ColumnmatchField1 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.3 | ColumnmatchField2 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.4 | ColumnmatchField3 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.5 | ColumnmatchField4 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.6 | ColumnmatchField5 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.7 | ColumnmatchField6 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.8 | ColumnmatchField7 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.9 | ColumnmatchField8 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.10 | ColumnmatchField9 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.11 | ColumnmatchField10 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.2.1.12 | ColumnmatchField11 | read-write | current | This attribute shall indicate match-field of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3 | TableqosMatchValueTable | not-accessible | current | QoS match-value attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1 | RowqosMatchValueEntry | not-accessible | current | QoS match-value attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.1 | ColumnmatchValue0 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.2 | ColumnmatchValue1 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.3 | ColumnmatchValue2 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.4 | ColumnmatchValue3 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.5 | ColumnmatchValue4 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.6 | ColumnmatchValue5 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.7 | ColumnmatchValue6 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.8 | ColumnmatchValue7 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.9 | ColumnmatchValue8 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.10 | ColumnmatchValue9 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.11 | ColumnmatchValue10 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.3.1.12 | ColumnmatchValue11 | read-write | current | This attribute shall indicate match-value of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4 | TableqosQueueTable | not-accessible | current | QoS Queue attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1 | RowqosQueueEntry | not-accessible | current | QoS Queue attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.1 | ColumnqueueNum0 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.2 | ColumnqueueNum1 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.3 | ColumnqueueNum2 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.4 | ColumnqueueNum3 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.5 | ColumnqueueNum4 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.6 | ColumnqueueNum5 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.7 | ColumnqueueNum6 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.8 | ColumnqueueNum7 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.9 | ColumnqueueNum8 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.10 | ColumnqueueNum9 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.11 | ColumnqueueNum10 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.4.1.12 | ColumnqueueNum11 | read-write | current | This attribute shall indicate Queue number of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5 | TableqosBitRateTable | not-accessible | current | QoS classification bit rate attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1 | RowqosBitRateEntry | not-accessible | current | QoS classification bit rate attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.1 | ColumnbitRate0 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.2 | ColumnbitRate1 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.3 | ColumnbitRate2 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.4 | ColumnbitRate3 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.5 | ColumnbitRate4 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.6 | ColumnbitRate5 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.7 | ColumnbitRate6 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.8 | ColumnbitRate7 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.9 | ColumnbitRate8 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.10 | ColumnbitRate9 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.11 | ColumnbitRate10 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.5.1.12 | ColumnbitRate11 | read-write | current | This attribute shall indicate classification bit rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6 | TableqosBurstRateTable | not-accessible | current | QoS classification burst rate attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1 | RowqosBurstRateEntry | not-accessible | current | QoS classification burst rate attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.1 | ColumnburstRate0 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.2 | ColumnburstRate1 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.3 | ColumnburstRate2 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.4 | ColumnburstRate3 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.5 | ColumnburstRate4 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.6 | ColumnburstRate5 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.7 | ColumnburstRate6 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.8 | ColumnburstRate7 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.9 | ColumnburstRate8 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.10 | ColumnburstRate9 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.11 | ColumnburstRate10 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.6.1.12 | ColumnburstRate11 | read-write | current | This attribute shall indicate classification burst rate of the QoS classification. |
| 1.3.6.1.4.1.4526.100.7.12.20.7 | TableclassificationStatusTable | not-accessible | current | QoS classification status attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1 | RowclassificationStatusEntry | not-accessible | current | QoS classification status attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.1 | Columnclassification0 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.2 | Columnclassification1 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.3 | Columnclassification2 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.4 | Columnclassification3 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.5 | Columnclassification4 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.6 | Columnclassification5 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.7 | Columnclassification6 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.8 | Columnclassification7 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.9 | Columnclassification8 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.10 | Columnclassification9 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.11 | Columnclassification10 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.20.7.1.12 | Columnclassification11 | read-write | current | This attribute shall indicate the status of this classification in the QoS policy profile. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.21 | Nodeipv6DhcpClientSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.21.1 | Scalaripv6DhcpClientStatus | read-write | current | This attribute indicates the DHCP client status. DHCP client is disabled by default. |
| 1.3.6.1.4.1.4526.100.7.12.21.2 | Scalaripv6DynamicIpAddr | read-only | current | This attribute indicates the dynamic IPv6 address of the AP. |
| 1.3.6.1.4.1.4526.100.7.12.21.3 | Scalaripv6StaticIpAddr | read-write | current | This attribute indicates the static management IPv6 address of the AP. |
| 1.3.6.1.4.1.4526.100.7.12.21.4 | Scalaripv6LinkLocalIpAddr | read-only | current | This attribute indicates the static LL IPv6 address of the AP. |
| 1.3.6.1.4.1.4526.100.7.12.21.5 | Scalaripv6PrefixLen | read-write | current | This attribute indicates the static prefix length of the management interface. |
| 1.3.6.1.4.1.4526.100.7.12.21.6 | Scalaripv6GatewayAddr | read-write | current | This attribute indicates the static gateway IPv6 address for the management interface. |
| 1.3.6.1.4.1.4526.100.7.12.21.7 | Scalaripv6PriDnsAddr | read-write | current | This attribute indicates the address that will be used as the first entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set … |
| 1.3.6.1.4.1.4526.100.7.12.21.8 | Scalaripv6SndDnsAddr | read-write | current | This attribute indicates the address that will be used as the second entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set… |
| 1.3.6.1.4.1.4526.100.7.12.21.9 | Scalaripv6NetworkIntegrityCheck | read-write | current | This attribute indicates the status of internet connection check . AP automatically validates whether the internet connection is active before allowing wireles… |
| 1.3.6.1.4.1.4526.100.7.12.22 | Nodeipv6Info802dot1x | |||
| 1.3.6.1.4.1.4526.100.7.12.22.1 | Nodeipv6Authinfo | |||
| 1.3.6.1.4.1.4526.100.7.12.22.1.1 | Scalaripv6PriRadIpAddr | read-write | current | Internet address of the Primary Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.22.1.2 | Scalaripv6PriRadPort | read-write | current | Port number used for authentication at the Primary Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.22.1.3 | Scalaripv6PriRadSharedSecret | read-write | current | Secret shared between NAS and the Primary Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.22.1.4 | Scalaripv6SndRadIpAddr | read-write | current | Internet address of the Second Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.22.1.5 | Scalaripv6SndRadPort | read-write | current | Port number used for authentication at the Second Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.22.1.6 | Scalaripv6SndRadSharedSecret | read-write | current | Secret shared between NAS and the Second Radius Server. |
| 1.3.6.1.4.1.4526.100.7.12.22.2 | Nodeipv6Accntinfo | |||
| 1.3.6.1.4.1.4526.100.7.12.22.2.1 | Scalaripv6PriAcntIpAddr | read-write | current | IP address of the Primary radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.22.2.2 | Scalaripv6PriAcntPort | read-write | current | port number of the Primary radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.22.2.3 | Scalaripv6PriAcntSharedSecret | read-write | current | password used by the ap to connect to the Primary radius account serve. |
| 1.3.6.1.4.1.4526.100.7.12.22.2.4 | Scalaripv6SndAcntIpAddr | read-write | current | IP address of the Second radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.22.2.5 | Scalaripv6SndAcntPort | read-write | current | port number of the Second radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.22.2.6 | Scalaripv6SndAcntSharedSecret | read-write | current | password used by the ap to connect to the Second radius account server. |
| 1.3.6.1.4.1.4526.100.7.12.22.3 | Nodeipv6AuthSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.22.3.1 | Scalaripv6ReauthTime | read-write | current | This attribute shall indicate 802.1x reauth time. |
| 1.3.6.1.4.1.4526.100.7.12.22.3.2 | Scalaripv6WpaGroupKeyUpdateCondition | read-write | current | This attribute shall indicate WPA group key update condition. |
| 1.3.6.1.4.1.4526.100.7.12.22.3.3 | Scalaripv6WpaGroupKeyUpdateIntervalSecond | read-write | current | This fields indicates the wpa keyupdate sec interval. |
| 1.3.6.1.4.1.4526.100.7.12.23 | Nodeipv6DhcpsSettings | |||
| 1.3.6.1.4.1.4526.100.7.12.23.1 | Scalaripv6DhcpServerStatus | read-write | current | This attribute shall indicate the status of DHCP server. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.12.23.2 | Scalaripv6DhcpsState | read-write | current | This attribute shall indicate the state of DHCP server. The default value is statefull(1). |
| 1.3.6.1.4.1.4526.100.7.12.23.3 | Scalaripv6DhcpsVlanId | read-write | current | This attribute indicates the VLAN ID of DHCP server's VLAN. Default value of DHCP server's VLAN ID is 1. |
| 1.3.6.1.4.1.4526.100.7.12.23.4 | Scalaripv6DhcpsIpStart | read-write | current | This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in colon format. |
| 1.3.6.1.4.1.4526.100.7.12.23.5 | Scalaripv6DhcpsIpEnd | read-write | current | This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in colon format. |
| 1.3.6.1.4.1.4526.100.7.12.23.6 | Scalaripv6DhcpsPrefixLen | read-write | current | This attribute indicates the prefix length of DHCP server will give. Default value of DHCP server's prefix length is 64. |
| 1.3.6.1.4.1.4526.100.7.12.23.7 | Scalaripv6DhcpsGateway | read-write | current | This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in colon format. |
| 1.3.6.1.4.1.4526.100.7.12.23.8 | Scalaripv6DhcpsPriDns | read-write | current | This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in colon format. |
| 1.3.6.1.4.1.4526.100.7.12.23.9 | Scalaripv6DhcpsSndDns | read-write | current | This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in colon format. |
| 1.3.6.1.4.1.4526.100.7.12.23.10 | Scalaripv6DhcpsPriWins | read-write | current | This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in colon format. |
| 1.3.6.1.4.1.4526.100.7.12.23.11 | Scalaripv6DhcpsSndWins | read-write | current | This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in colon format. |