WebBase-Access-Control-MIB
67 objects
.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| IPV6-TC | Ipv6Address |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.27 | IdentityswWACMIB | . | ||
| 1.3.6.1.4.1.171.12.27.1 | NodeswWACCtrl | |||
| 1.3.6.1.4.1.171.12.27.1.1 | ScalarswWebAuthAdminState | read-write | current | This object enables/disables the web-based authentication status of the device. |
| 1.3.6.1.4.1.171.12.27.1.2 | ScalarswWebAuthMethod | read-write | current | This object indicates the authentication method type. The RADIUS method is authenticated per authentication server. |
| 1.3.6.1.4.1.171.12.27.1.3 | ScalarswWebAuthVlanName | read-write | obsolete | This object indicates the authentication method VLAN name. |
| 1.3.6.1.4.1.171.12.27.1.4 | ScalarswWebAuthAllPortstate | read-write | obsolete | This object enables/disables the authentication state of all ports on the device. |
| 1.3.6.1.4.1.171.12.27.1.5 | ScalarswWebAuthDefaultredirpath | read-write | current | The URL that the client will be redirected to after successful authentication. Initially, the redirected path is an empty string. It must be specified by the u… |
| 1.3.6.1.4.1.171.12.27.1.6 | ScalarswWebAuthLogouttimer | read-write | obsolete | The authenticated port will revert to an un-authenticated state after the logout times out. When the value is 0, it means the logout timer is infinite and the … |
| 1.3.6.1.4.1.171.12.27.1.7 | ScalarswWACVirtualIpAddr | read-write | current | Specifies the WAC virtual IP address which is used to accept authentication requests from an unauthenticated host. The virtual IP of WAC is used to accept auth… |
| 1.3.6.1.4.1.171.12.27.1.8 | ScalarswWACSwitchHttpProtocol | read-write | current | Specifies which WAC protocol runs on this TCP port. |
| 1.3.6.1.4.1.171.12.27.1.9 | ScalarswWACSwitchHttpPort | read-write | current | Specifies the TCP port which the WAC switch listens to and uses to finish the authenticating process. |
| 1.3.6.1.4.1.171.12.27.1.10 | ScalarswWACAuthFailOverState | read-write | current | This object enables/disables the web-based authentication auth_failover status of the device. When the authentication failover is enabled, if RADIU servers aut… |
| 1.3.6.1.4.1.171.12.27.1.11 | ScalarswWACRadiusAuthorizationState | read-write | current | This object enables/disables the web-based authentication RADIUS authorization status of the device. When the RADIUS authorization state is disabled, the assig… |
| 1.3.6.1.4.1.171.12.27.1.12 | ScalarswWACLocalAuthorizationState | read-write | current | This object enables/disables the web-based authentication local authorization status of the device. When the local authorization state is disabled, the assigne… |
| 1.3.6.1.4.1.171.12.27.1.13 | ScalarswWACAuthClearDefaultredirpath | read-write | current | This object is used to clear the default redirect URL that has been previously configured. |
| 1.3.6.1.4.1.171.12.27.1.14 | ScalarswWACVirtualIPv6Addr | read-write | current | Specifies the WAC virtual IPv6 address which is used to accept authentication requests from an unauthenticated host. The virtual IP of WAC is used to accept au… |
| 1.3.6.1.4.1.171.12.27.1.30 | ScalarswWACPageElementPageTitle | read-write | current | Specifies the JWAC page title of the authenticate page. |
| 1.3.6.1.4.1.171.12.27.1.31 | ScalarswWACPageElementLoginWindowTitle | read-write | current | Specifies the WAC login window title mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.27.1.32 | ScalarswWACPageElementUserName | read-write | current | Specifies the JWAC user name mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.27.1.33 | ScalarswWACPageElementPassWord | read-write | current | Specifies the remaining JWAC password mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.27.1.34 | ScalarswJWACPageElementLogoutWindowTitle | read-write | current | Specifies the JWAC logout window title mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.27.1.35 | ScalarswWACPageElementNotificationLine1 | read-write | current | Used to set the notification information of line 1 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.27.1.36 | ScalarswWACPageElementNotificationLine2 | read-write | current | Used to set the notification information of line 2 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.27.1.37 | ScalarswWACPageElementNotificationLine3 | read-write | current | Used to set the notification information of line 3 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.27.1.38 | ScalarswWACPageElementNotificationLine4 | read-write | current | Used to set the notification information of line 4 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.27.1.39 | ScalarswWACPageElementNotificationLine5 | read-write | current | Used to set the notification information of line 5 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.27.2 | NodeswWACInfo | |||
| 1.3.6.1.4.1.171.12.27.2.1 | TableswWACAuthInfoTable | not-accessible | current | This table contains WAC client host information. |
| 1.3.6.1.4.1.171.12.27.2.1.1 | RowswWACAuthInfoEntry | not-accessible | current | This list contains WAC client host information. |
| 1.3.6.1.4.1.171.12.27.2.1.1.1 | ColumnswWACAuthInfoPort | read-only | current | Specifies the WAC host port number. |
| 1.3.6.1.4.1.171.12.27.2.1.1.2 | ColumnswWACAuthInfoAuthStatus | read-only | current | Specifies the WAC host Authentication state. |
| 1.3.6.1.4.1.171.12.27.2.1.1.3 | ColumnswWACAuthInfoMACAddr | read-only | current | Specifies the WAC host MAC address. |
| 1.3.6.1.4.1.171.12.27.2.1.1.4 | ColumnswWACAuthInfoVID | read-only | current | Specifies the WAC host VID. |
| 1.3.6.1.4.1.171.12.27.2.1.1.5 | ColumnswWACAuthInfoRemainAgeTime | read-only | current | Specifies the remaining WAC host agetime. 0 indicates the authenticated host on the port will never age out. |
| 1.3.6.1.4.1.171.12.27.2.1.1.6 | ColumnswWACAuthInfoIdleTime | read-only | current | Specifies the WAC host idle time. 0 indicates the idle state of the authenticated host on the port will never be checked. |
| 1.3.6.1.4.1.171.12.27.2.1.1.7 | ColumnswWACAuthInfoBlockTime | read-only | current | Specifies the WAC host block time. |
| 1.3.6.1.4.1.171.12.27.2.1.1.8 | ColumnswWACAuthInfoStatus | read-write | current | Specifies the status of the WAC host. Setting delete (2) will delete this WAC host entry. |
| 1.3.6.1.4.1.171.12.27.2.1.1.9 | ColumnswWACAuthInfoPriority | read-only | current | Specifies the WAC host priority assigned when pass authentication. -1 indicates the host has no priority assigned. |
| 1.3.6.1.4.1.171.12.27.2.2 | TableswWACAuthStateTable | not-accessible | current | This table contains WAC client host information. |
| 1.3.6.1.4.1.171.12.27.2.2.1 | RowswWACAuthStateEntry | not-accessible | current | This list contains WAC client host information. |
| 1.3.6.1.4.1.171.12.27.2.2.1.1 | ColumnswWACAuthStatePort | read-only | current | Specifies the WAC host port number. |
| 1.3.6.1.4.1.171.12.27.2.2.1.2 | ColumnswWACAuthStateOriginalVid | read-only | current | Specifies the WAC host original receive VLAN ID. |
| 1.3.6.1.4.1.171.12.27.2.2.1.3 | ColumnswWACAuthStateMACAddr | read-only | current | Specifies the WAC host MAC address. |
| 1.3.6.1.4.1.171.12.27.2.2.1.5 | ColumnswWACAuthStateAuthStatus | read-only | current | Specifies the WAC host Authentication state. |
| 1.3.6.1.4.1.171.12.27.2.2.1.7 | ColumnswWACAuthStateAssignVid | read-only | current | Specifies the WAC host assign VID. |
| 1.3.6.1.4.1.171.12.27.2.2.1.8 | ColumnswWACAuthStateAssignPriority | read-only | current | Specifies the WAC host priority assigned when pass authentication. -1 indicates the host has no priority assigned. |
| 1.3.6.1.4.1.171.12.27.2.2.1.12 | ColumnswWACAuthStateRemainTime | read-only | current | Specifies the remaining WAC host aging time/ block time. 0 indicates the authenticated host on the port will never age out. |
| 1.3.6.1.4.1.171.12.27.2.2.1.14 | ColumnswWACAuthStateIdleTime | read-only | current | Specifies the WAC host idle time. 0 indicates the idle state of the authenticated host on the port will never be checked. |
| 1.3.6.1.4.1.171.12.27.2.2.1.25 | ColumnswWACAuthStateDelAction | read-write | current | Used to delete the specified authentication entry. Setting delete(2) will delete this WAC host entry. |
| 1.3.6.1.4.1.171.12.27.3 | NodeswWACMgmt | |||
| 1.3.6.1.4.1.171.12.27.3.1 | TableswWebAuthPortTable | not-accessible | current | A table that contains method and state information for every port. |
| 1.3.6.1.4.1.171.12.27.3.1.1 | RowswWebAuthPortEntry | not-accessible | current | A list of method types and states for each port. |
| 1.3.6.1.4.1.171.12.27.3.1.1.1 | ColumnswWebAuthPortIndex | read-only | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.12.27.3.1.1.2 | ColumnswWebAuthPortState | read-write | current | This object enables/disables the authentication state of this port. |
| 1.3.6.1.4.1.171.12.27.3.1.1.3 | ColumnswWebAuthPortUserName | read-only | obsolete | This object indicates the user name of the port. |
| 1.3.6.1.4.1.171.12.27.3.1.1.4 | ColumnswWebAuthAuthStatus | read-only | obsolete | This object indicates whether the current port is authenticated or not. |
| 1.3.6.1.4.1.171.12.27.3.1.1.5 | ColumnswWebAuthAssignedVID | read-only | obsolete | This object indicates the assigned VLAN ID of this port. |
| 1.3.6.1.4.1.171.12.27.3.1.1.6 | ColumnswWACPortAgeingTime | read-write | current | Specifies the time period during which an authenticated host will remain in the authenticated state. 0 indicates the authenticated host will never age out on t… |
| 1.3.6.1.4.1.171.12.27.3.1.1.7 | ColumnswWACPortIdleTime | read-write | current | Specifies the idle_time. If there is no traffic during idle_time, the host will be moved back to the unauthenticated state. 0 indicates the idle state of the a… |
| 1.3.6.1.4.1.171.12.27.3.1.1.8 | ColumnswWACPortBlockTime | read-write | current | Specifies the block_time. If a host fails to pass authentication, it will be blocked for a period specified by the block_time. |
| 1.3.6.1.4.1.171.12.27.3.2 | TableswWebAuthUserTable | not-accessible | current | A table that contains web-based authentication account info. |
| 1.3.6.1.4.1.171.12.27.3.2.1 | RowswWebAuthUserEntry | not-accessible | current | A list that contains web-based authentication account info. |
| 1.3.6.1.4.1.171.12.27.3.2.1.1 | ColumnswWebAuthUserNameIndex | read-only | current | This object indicates the username with 15 being the maximum number of characters. |
| 1.3.6.1.4.1.171.12.27.3.2.1.2 | ColumnswWebAuthUserPWD | read-create | current | This object indicates the password (maximum number of characters is 15) for this user account. It is write-only. |
| 1.3.6.1.4.1.171.12.27.3.2.1.3 | ColumnswWebAuthUserVlanName | read-create | obsolete | This object indicates the VLAN name for this user account. |
| 1.3.6.1.4.1.171.12.27.3.2.1.4 | ColumnswWebAuthUserStatus | read-create | current | This object manages this entry. |
| 1.3.6.1.4.1.171.12.27.3.2.1.5 | ColumnswWebAuthUserVID | read-create | current | This object indicates the VID for this user account. 0 indicates to delete configure VID in this user account. |