WebGraph-AnalogIO-57662-US-MIB
294 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5040 | Nodewut | |||
| 1.3.6.1.4.1.5040.1 | NodewtComServer | |||
| 1.3.6.1.4.1.5040.1.2 | NodewtWebio | |||
| 1.3.6.1.4.1.5040.1.2.29 | NodewtWebGraphAnalog57662 | |||
| 1.3.6.1.4.1.5040.1.2.29.1 | NodewtWebGraphAnalog57662Inventory | |||
| 1.3.6.1.4.1.5040.1.2.29.1.1 | ScalarwtWebGraphAnalog57662Sensors | read-only | mandatory | Number of sensors |
| 1.3.6.1.4.1.5040.1.2.29.1.2 | TablewtWebGraphAnalog57662SensorTable | not-accessible | mandatory | List of sensors. |
| 1.3.6.1.4.1.5040.1.2.29.1.2.1 | RowwtWebGraphAnalog57662SensorEntry | not-accessible | mandatory | List of sensor numbers. |
| 1.3.6.1.4.1.5040.1.2.29.1.2.1.1 | ColumnwtWebGraphAnalog57662SensorNo | read-only | mandatory | Sensor number. |
| 1.3.6.1.4.1.5040.1.2.29.1.3 | TablewtWebGraphAnalog57662ValuesTable | not-accessible | mandatory | List of measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.29.1.3.1 | RowwtWebGraphAnalog57662ValuesEntry | not-accessible | mandatory | Measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.29.1.3.1.1 | ColumnwtWebGraphAnalog57662Values | read-write | mandatory | Measurement value of the sensor, ASCII. This value will be translated according to the ports settings for the read and write operations. |
| 1.3.6.1.4.1.5040.1.2.29.1.4 | TablewtWebGraphAnalog57662BinaryValuesTable | not-accessible | mandatory | List of binary measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.29.1.4.1 | RowwtWebGraphAnalog57662BinaryValuesEntry | not-accessible | mandatory | Binary measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.29.1.4.1.1 | ColumnwtWebGraphAnalog57662BinaryValues | read-write | mandatory | Binary measurement value of the sensor in 1/1000, signed number, 0x7FFFFFFF indicates an invalid value. This value will be translated according to the ports se… |
| 1.3.6.1.4.1.5040.1.2.29.2 | NodewtWebGraphAnalog57662SessCntrl | |||
| 1.3.6.1.4.1.5040.1.2.29.2.1 | ScalarwtWebGraphAnalog57662SessCntrlPassword | read-write | mandatory | Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalog57662SessCntrlLogout. When read this variable provides a string of leng… |
| 1.3.6.1.4.1.5040.1.2.29.2.2 | ScalarwtWebGraphAnalog57662SessCntrlConfigMode | read-only | mandatory | When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is… |
| 1.3.6.1.4.1.5040.1.2.29.2.3 | ScalarwtWebGraphAnalog57662SessCntrlLogout | read-write | mandatory | If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters ar… |
| 1.3.6.1.4.1.5040.1.2.29.2.4 | ScalarwtWebGraphAnalog57662SessCntrlAdminPassword | read-write | mandatory | This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid p… |
| 1.3.6.1.4.1.5040.1.2.29.2.5 | ScalarwtWebGraphAnalog57662SessCntrlConfigPassword | read-write | mandatory | This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was ass… |
| 1.3.6.1.4.1.5040.1.2.29.3 | NodewtWebGraphAnalog57662Config | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1 | NodewtWebGraphAnalog57662Device | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.1 | NodewtWebGraphAnalog57662Text | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.1.1 | ScalarwtWebGraphAnalog57662DeviceName | read-write | mandatory | Name of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.1.2 | ScalarwtWebGraphAnalog57662DeviceText | read-write | mandatory | Description of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.1.3 | ScalarwtWebGraphAnalog57662DeviceLocation | read-write | mandatory | Description of the location of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.1.4 | ScalarwtWebGraphAnalog57662DeviceContact | read-write | mandatory | Contact address of the system operator of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2 | NodewtWebGraphAnalog57662TimeDate | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1 | NodewtWebGraphAnalog57662TimeZone | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.1 | ScalarwtWebGraphAnalog57662TzOffsetHrs | read-write | mandatory | Offset hours for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.2 | ScalarwtWebGraphAnalog57662TzOffsetMin | read-write | mandatory | Offset minutes for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.3 | ScalarwtWebGraphAnalog57662TzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.4 | ScalarwtWebGraphAnalog57662StTzOffsetHrs | read-write | mandatory | Offset hours of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.5 | ScalarwtWebGraphAnalog57662StTzOffsetMin | read-write | mandatory | Offset minutes of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.6 | ScalarwtWebGraphAnalog57662StTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.7 | ScalarwtWebGraphAnalog57662StTzStartMonth | read-write | mandatory | Month in which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.8 | ScalarwtWebGraphAnalog57662StTzStartMode | read-write | mandatory | Mode of the day of the week for which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.9 | ScalarwtWebGraphAnalog57662StTzStartWday | read-write | mandatory | Day of the week on which the change is made from winter time to summer time |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.10 | ScalarwtWebGraphAnalog57662StTzStartHrs | read-write | mandatory | Hour in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.11 | ScalarwtWebGraphAnalog57662StTzStartMin | read-write | mandatory | Minute in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.12 | ScalarwtWebGraphAnalog57662StTzStopMonth | read-write | mandatory | Month in which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.13 | ScalarwtWebGraphAnalog57662StTzStopMode | read-write | mandatory | Mode of the week day on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.14 | ScalarwtWebGraphAnalog57662StTzStopWday | read-write | mandatory | Day of the week on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.15 | ScalarwtWebGraphAnalog57662StTzStopHrs | read-write | mandatory | Hour at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.16 | ScalarwtWebGraphAnalog57662StTzStopMin | read-write | mandatory | Minute at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.2 | NodewtWebGraphAnalog57662TimeServer | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.1 | ScalarwtWebGraphAnalog57662TimeServer1 | read-write | mandatory | IP address or name of the 1st time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.2 | ScalarwtWebGraphAnalog57662TimeServer2 | read-write | mandatory | IP address or name of the 2nd time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.3 | ScalarwtWebGraphAnalog57662TsEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.4 | ScalarwtWebGraphAnalog57662TsSyncTime | read-write | mandatory | Daily synchronisation time with the time server (hour: 0-23). |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.3 | NodewtWebGraphAnalog57662DeviceClock | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.1 | ScalarwtWebGraphAnalog57662ClockHrs | read-write | mandatory | Clock hours taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.2 | ScalarwtWebGraphAnalog57662ClockMin | read-write | mandatory | Clock minutes taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.3 | ScalarwtWebGraphAnalog57662ClockDay | read-write | mandatory | Date: Day of the month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.4 | ScalarwtWebGraphAnalog57662ClockMonth | read-write | mandatory | Date: Month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.5 | ScalarwtWebGraphAnalog57662ClockYear | read-write | mandatory | Date: Year, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3 | NodewtWebGraphAnalog57662Basic | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.1 | NodewtWebGraphAnalog57662Network | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.1 | ScalarwtWebGraphAnalog57662IpAddress | read-write | mandatory | IP address of the Webio |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.2 | ScalarwtWebGraphAnalog57662SubnetMask | read-write | mandatory | Subnet mask of the Webio |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.3 | ScalarwtWebGraphAnalog57662Gateway | read-write | mandatory | Gateway of the Webio |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.4 | ScalarwtWebGraphAnalog57662DnsServer1 | read-write | mandatory | IP address of the 1st DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.5 | ScalarwtWebGraphAnalog57662DnsServer2 | read-write | mandatory | IP address of the 2nd DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.6 | ScalarwtWebGraphAnalog57662AddConfig | read-write | mandatory | Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.2 | NodewtWebGraphAnalog57662HTTP | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.2.1 | ScalarwtWebGraphAnalog57662Startup | read-write | mandatory | Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selecte… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.2.2 | ScalarwtWebGraphAnalog57662GetHeaderEnable | read-write | mandatory | If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Oc… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.2.3 | ScalarwtWebGraphAnalog57662HttpPort | read-write | mandatory | Definition of the standard HTML port (Default: 80). |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3 | NodewtWebGraphAnalog57662Mail | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.1 | ScalarwtWebGraphAnalog57662MailAdName | read-write | mandatory | Device name for mail administration. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.2 | ScalarwtWebGraphAnalog57662MailReply | read-write | mandatory | Reply address for the mail server. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.3 | ScalarwtWebGraphAnalog57662MailServer | read-write | mandatory | Name or IP address of the mail server. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.4 | ScalarwtWebioAn1MailEnable | read-write | mandatory | Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.5 | ScalarwtWebGraphAnalog57662MailAuthentication | read-write | mandatory | Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: u… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.6 | ScalarwtWebGraphAnalog57662MailAuthUser | read-write | mandatory | Name of the user to be authenticated. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.7 | ScalarwtWebGraphAnalog57662MailAuthPassword | read-write | mandatory | Authentication password. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.8 | ScalarwtWebGraphAnalog57662MailPop3Server | read-write | mandatory | Name or Ip-address of the POP3 Servers. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4 | NodewtWebGraphAnalog57662SNMP | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.1 | ScalarwtWebGraphAnalog57662SnmpCommunityStringRead | read-write | mandatory | Community string read only |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.2 | ScalarwtWebGraphAnalog57662SnmpCommunityStringReadWrite | read-write | mandatory | Community string read / write |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.3 | ScalarwtWebGraphAnalog57662SystemTrapManagerIP | read-write | mandatory | Name or IP address of the TCP server which accepts the system trap. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.4 | ScalarwtWebGraphAnalog57662SystemTrapEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5 | ScalarwtWebGraphAnalog57662SnmpEnable | read-write | mandatory | Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compare… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.6 | ScalarwtWebGraphAnalog57662SnmpCommunityStringTrap | read-write | mandatory | Community string send within traps. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.5 | NodewtWebGraphAnalog57662UDP | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.5.1 | ScalarwtWebGraphAnalog57662UdpPort | read-write | mandatory | Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.5.2 | ScalarwtWebGraphAnalog57662UdpEnable | read-write | mandatory | Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.6 | NodewtWebGraphAnalog57662Syslog | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.1 | ScalarwtWebGraphAnalog57662SyslogServerIP | read-write | mandatory | Name or IP address of the Syslog server, which accepts the Syslog messgaes. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.2 | ScalarwtWebGraphAnalog57662SyslogServerPort | read-write | mandatory | Portnumber of the Syslog servers, default 514. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.3 | ScalarwtWebGraphAnalog57662SyslogSystemMessagesEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.4 | ScalarwtWebGraphAnalog57662SyslogEnable | read-write | mandatory | Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7 | NodewtWebGraphAnalog57662FTP | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.1 | ScalarwtWebGraphAnalog57662FTPServerIP | read-write | mandatory | Name or IP address of the FTP server, which accepts the FTP messages. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.2 | ScalarwtWebGraphAnalog57662FTPServerControlPort | read-write | mandatory | Portnumber of the control port of the FTP server, default 21. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.3 | ScalarwtWebGraphAnalog57662FTPUserName | read-write | mandatory | FTP Loggin: user name. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.4 | ScalarwtWebGraphAnalog57662FTPPassword | read-write | mandatory | FTP Loggin: user password. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.5 | ScalarwtWebGraphAnalog57662FTPAccount | read-write | mandatory | FTP Loggin: name of account. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.6 | ScalarwtWebGraphAnalog57662FTPOption | read-write | mandatory | Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.7 | ScalarwtWebGraphAnalog57662FTPEnable | read-write | mandatory | Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.8 | NodewtWebGraphAnalog57662Language | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.8.1 | ScalarwtWebGraphAnalog57662LanguageSelect | read-write | mandatory | Language selection: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 2-7: unused Bit 1 : English Bit 0 : German |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9 | NodewtWebGraphAnalog57662Binary | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.1 | ScalarwtWebGraphAnalog57662BinaryModeCount | read-only | mandatory | Number of independent binary channels. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2 | TablewtWebGraphAnalog57662BinaryIfTable | not-accessible | mandatory | Table of indices. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1 | RowwtWebGraphAnalog57662BinaryIfEntry | not-accessible | mandatory | Indices of the binary channels. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1.1 | ColumnwtWebGraphAnalog57662BinaryModeNo | read-only | mandatory | Number of the binary channel. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3 | TablewtWebGraphAnalog57662BinaryTable | not-accessible | mandatory | Table of properties of the binary mode. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1 | RowwtWebGraphAnalog57662BinaryEntry | not-accessible | mandatory | Binary properties. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.1 | ColumnwtWebGraphAnalog57662BinaryOperationMode | read-write | mandatory | Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.2 | ColumnwtWebGraphAnalog57662BinaryTcpServerLocalPort | read-write | mandatory | Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the m… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.3 | ColumnwtWebGraphAnalog57662BinaryTcpServerInputTrigger | read-write | mandatory | Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rul… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.4 | ColumnwtWebGraphAnalog57662BinaryTcpServerApplicationMode | read-write | mandatory | Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.5 | ColumnwtWebGraphAnalog57662BinaryTcpClientLocalPort | read-write | mandatory | Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the m… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.6 | ColumnwtWebGraphAnalog57662BinaryTcpClientServerPort | read-write | mandatory | Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting t… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.7 | ColumnwtWebGraphAnalog57662BinaryTcpClientServerIpAddr | read-write | mandatory | Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting th… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.8 | ColumnwtWebGraphAnalog57662BinaryTcpClientServerPassword | read-write | mandatory | Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administ… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.9 | ColumnwtWebGraphAnalog57662BinaryTcpClientInactivity | read-write | mandatory | Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the ti… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10 | ColumnwtWebGraphAnalog57662BinaryTcpClientInputTrigger | read-write | mandatory | Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rul… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.11 | ColumnwtWebGraphAnalog57662BinaryTcpClientInterval | read-write | mandatory | Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.12 | ColumnwtWebGraphAnalog57662BinaryTcpClientApplicationMode | read-write | mandatory | Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.13 | ColumnwtWebGraphAnalog57662BinaryUdpPeerLocalPort | read-write | mandatory | Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.14 | ColumnwtWebGraphAnalog57662BinaryUdpPeerRemotePort | read-write | mandatory | Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when se… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.15 | ColumnwtWebGraphAnalog57662BinaryUdpPeerRemoteIpAddr | read-write | mandatory | Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when set… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.16 | ColumnwtWebGraphAnalog57662BinaryUdpPeerInputTrigger | read-write | mandatory | Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rul… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.17 | ColumnwtWebGraphAnalog57662BinaryUdpPeerInterval | read-write | mandatory | Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.18 | ColumnwtWebGraphAnalog57662BinaryUdpPeerApplicationMode | read-write | mandatory | Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unus… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.19 | ColumnwtWebGraphAnalog57662BinaryConnectedPort | read-only | mandatory | Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.20 | ColumnwtWebGraphAnalog57662BinaryConnectedIpAddr | read-only | mandatory | IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.21 | ColumnwtWebGraphAnalog57662BinaryTcpServerClientHttpPort | read-write | mandatory | HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.22 | ColumnwtWebGraphAnalog57662BinaryTcpClientServerHttpPort | read-write | mandatory | HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.23 | ColumnwtWebGraphAnalog57662BinaryTcpServerHysteresis1 | read-write | mandatory | A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpServer… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.24 | ColumnwtWebGraphAnalog57662BinaryTcpServerHysteresis2 | read-write | mandatory | A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpServer… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.25 | ColumnwtWebGraphAnalog57662BinaryTcpClientHysteresis1 | read-write | mandatory | A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpClient… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.26 | ColumnwtWebGraphAnalog57662BinaryTcpClientHysteresis2 | read-write | mandatory | A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpClient… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.27 | ColumnwtWebGraphAnalog57662BinaryUdpPeerHysteresis1 | read-write | mandatory | A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryUdpPeerIn… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.28 | ColumnwtWebGraphAnalog57662BinaryUdpPeerHysteresis2 | read-write | mandatory | A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryUdpPeerIn… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4 | NodewtWebGraphAnalog57662Datalogger | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.1 | ScalarwtWebGraphAnalog57662LoggerTimebase | read-write | mandatory | Time base of the data logger |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.2 | ScalarwtWebGraphAnalog57662LoggerSensorSel | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.3 | ScalarwtWebGraphAnalog57662DisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.4 | TablewtWebGraphAnalog57662SensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1 | RowwtWebGraphAnalog57662SensorColorEntry | not-accessible | mandatory | Index numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1.1 | ColumnwtWebGraphAnalog57662SensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.5 | ScalarwtWebGraphAnalog57662AutoScaleEnable | read-write | mandatory | If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.6 | ScalarwtWebGraphAnalog57662VerticalUpperLimit | read-write | mandatory | This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.7 | ScalarwtWebGraphAnalog57662VerticalLowerLimit | read-write | mandatory | This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.4.8 | ScalarwtWebGraphAnalog57662HorizontalZoom | read-write | mandatory | Defines the default zoom stage, if no auto scaling is selected. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5 | NodewtWebGraphAnalog57662Alarm | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.1 | ScalarwtWebGraphAnalog57662AlarmCount | read-only | mandatory | Number of independent alarms. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.2 | TablewtWebGraphAnalog57662AlarmIfTable | not-accessible | mandatory | List of alarm indices. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1 | RowwtWebGraphAnalog57662AlarmIfEntry | not-accessible | mandatory | Numbers of the alarms. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1.1 | ColumnwtWebGraphAnalog57662AlarmNo | read-only | mandatory | Alarm number. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3 | TablewtWebGraphAnalog57662AlarmTable | not-accessible | mandatory | List of settings depending on the alarm number. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1 | RowwtWebGraphAnalog57662AlarmEntry | not-accessible | mandatory | Alarm parameters of the individual alarms. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.1 | ColumnwtWebGraphAnalog57662AlarmTrigger | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.2 | ColumnwtWebGraphAnalog57662AlarmMin1 | read-write | mandatory | Minimum sensor 1 with maximum 3 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.3 | ColumnwtWebGraphAnalog57662AlarmMax1 | read-write | mandatory | Maximum sensor 1 with maximum 3 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.4 | ColumnwtWebGraphAnalog57662AlarmHysteresis1 | read-write | mandatory | Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) with maximum 3 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.5 | ColumnwtWebGraphAnalog57662AlarmDelay | read-write | mandatory | Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.6 | ColumnwtWebGraphAnalog57662AlarmInterval | read-write | mandatory | Send interval for alarm messages. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.7 | ColumnwtWebGraphAnalog57662AlarmEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.8 | ColumnwtWebGraphAnalog57662AlarmEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.9 | ColumnwtWebGraphAnalog57662AlarmMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.10 | ColumnwtWebGraphAnalog57662AlarmMailText | read-write | mandatory | Alarm mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.11 | ColumnwtWebGraphAnalog57662AlarmManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.12 | ColumnwtWebGraphAnalog57662AlarmTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.13 | ColumnwtWebGraphAnalog57662AlarmMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.14 | ColumnwtWebGraphAnalog57662AlarmTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.15 | ColumnwtWebGraphAnalog57662AlarmTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.16 | ColumnwtWebGraphAnalog57662AlarmTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.17 | ColumnwtWebGraphAnalog57662AlarmClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.18 | ColumnwtWebGraphAnalog57662AlarmClearMailText | read-write | mandatory | Alarm clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.19 | ColumnwtWebGraphAnalog57662AlarmClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.20 | ColumnwtWebGraphAnalog57662AlarmClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.21 | ColumnwtWebGraphAnalog57662AlarmMin2 | read-write | mandatory | Minimum sensor 2 with maximum 3 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.22 | ColumnwtWebGraphAnalog57662AlarmMax2 | read-write | mandatory | Maximum sensor 2 with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.23 | ColumnwtWebGraphAnalog57662AlarmHysteresis2 | read-write | mandatory | Hysterese rel. sensor 2 with maximum 3 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.24 | ColumnwtWebGraphAnalog57662AlarmSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.25 | ColumnwtWebGraphAnalog57662AlarmSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.26 | ColumnwtWebGraphAnalog57662AlarmSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.27 | ColumnwtWebGraphAnalog57662AlarmSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.28 | ColumnwtWebGraphAnalog57662AlarmFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.29 | ColumnwtWebGraphAnalog57662AlarmFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.30 | ColumnwtWebGraphAnalog57662AlarmFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.31 | ColumnwtWebGraphAnalog57662AlarmFtpClearText | read-write | mandatory | Alarm clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.32 | ColumnwtWebGraphAnalog57662AlarmFtpOption | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.33 | ColumnwtWebGraphAnalog57662AlarmTimerCron | read-write | mandatory | This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a spa… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6 | NodewtWebGraphAnalog57662Graphics | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.1 | NodewtWebGraphAnalog57662GraphicsBase | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.1 | ScalarwtWebGraphAnalog57662GraphicsBaseEnable | read-write | mandatory | Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.2 | ScalarwtWebGraphAnalog57662GraphicsBaseWidth | read-write | mandatory | Defines the width of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.3 | ScalarwtWebGraphAnalog57662GraphicsBaseHeight | read-write | mandatory | Defines the height of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.4 | ScalarwtWebGraphAnalog57662GraphicsBaseFrameColor | read-write | mandatory | Frame color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.5 | ScalarwtWebGraphAnalog57662GraphicsBaseBackgroundColor | read-write | mandatory | Background color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.6 | ScalarwtWebGraphAnalog57662GraphicsBasePollingrate | read-write | mandatory | Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.2 | NodewtWebGraphAnalog57662GraphicsSelect | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.1 | ScalarwtWebGraphAnalog57662GraphicsSelectDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.2 | ScalarwtWebGraphAnalog57662GraphicsSelectDisplayShowExtrem | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sens… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3 | TablewtWebGraphAnalog57662SensorColor2Table | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1 | RowwtWebGraphAnalog57662SensorColor2Entry | not-accessible | mandatory | Numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.1 | ColumnwtWebGraphAnalog57662GraphicsSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.2 | ColumnwtWebGraphAnalog57662GraphicsSelectScale | read-write | mandatory | Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3 | NodewtWebGraphAnalog57662GraphicsScale | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.1 | ScalarwtWebGraphAnalog57662GraphicsScaleAutoScaleEnable | read-write | mandatory | Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2-… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.2 | ScalarwtWebGraphAnalog57662GraphicsScaleAutoFitEnable | read-write | mandatory | Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2-7: un… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.3 | ScalarwtWebGraphAnalog57662GraphicsScale1Min | read-only | mandatory | Scale 1: Minimum. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.4 | ScalarwtWebGraphAnalog57662GraphicsScale2Min | read-only | mandatory | Scale 2: Minimum. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.7 | ScalarwtWebGraphAnalog57662GraphicsScale1Max | read-only | mandatory | Scale 1: Maximum. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.8 | ScalarwtWebGraphAnalog57662GraphicsScale2Max | read-only | mandatory | Scale 2: Maximum. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.11 | ScalarwtWebGraphAnalog57662GraphicsScale1Unit | read-only | mandatory | Scale 1: Unit. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.12 | ScalarwtWebGraphAnalog57662GraphicsScale2Unit | read-only | mandatory | Scale 2: Unit. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7 | NodewtWebGraphAnalog57662Report | |||
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.1 | ScalarwtWebGraphAnalog57662ReportCount | read-only | mandatory | Number of independent Reports. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.2 | TablewtWebGraphAnalog57662ReportIfTable | not-accessible | mandatory | List of Report indices. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1 | RowwtWebGraphAnalog57662ReportIfEntry | not-accessible | mandatory | Numbers of the Reports. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1.1 | ColumnwtWebGraphAnalog57662ReportNo | read-only | mandatory | Report number. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3 | TablewtWebGraphAnalog57662ReportTable | not-accessible | mandatory | List of settings depending on the Report number. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1 | RowwtWebGraphAnalog57662ReportEntry | not-accessible | mandatory | Report parameters of the individual Reports. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.1 | ColumnwtWebGraphAnalog57662ReportEnable | read-write | mandatory | Bin�r kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.2 | ColumnwtWebGraphAnalog57662ReportTimerCron | read-write | mandatory | This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a spa… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.3 | ColumnwtWebGraphAnalog57662ReportMethodeEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.8 | ColumnwtWebGraphAnalog57662ReportEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.9 | ColumnwtWebGraphAnalog57662ReportMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.10 | ColumnwtWebGraphAnalog57662ReportMailText | read-write | mandatory | Report mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.11 | ColumnwtWebGraphAnalog57662ReportManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.12 | ColumnwtWebGraphAnalog57662ReportTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.13 | ColumnwtWebGraphAnalog57662ReportMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.14 | ColumnwtWebGraphAnalog57662ReportTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.15 | ColumnwtWebGraphAnalog57662ReportTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.16 | ColumnwtWebGraphAnalog57662ReportTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.17 | ColumnwtWebGraphAnalog57662ReportClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.18 | ColumnwtWebGraphAnalog57662ReportClearMailText | read-write | mandatory | Report clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.19 | ColumnwtWebGraphAnalog57662ReportClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.20 | ColumnwtWebGraphAnalog57662ReportClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.24 | ColumnwtWebGraphAnalog57662ReportSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.25 | ColumnwtWebGraphAnalog57662ReportSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.26 | ColumnwtWebGraphAnalog57662ReportSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.27 | ColumnwtWebGraphAnalog57662ReportSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of … |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.28 | ColumnwtWebGraphAnalog57662ReportFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.29 | ColumnwtWebGraphAnalog57662ReportFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.30 | ColumnwtWebGraphAnalog57662ReportFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.31 | ColumnwtWebGraphAnalog57662ReportFtpClearText | read-write | mandatory | Report clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.32 | ColumnwtWebGraphAnalog57662ReportFtpOption | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.29.3.2 | NodewtWebGraphAnalog57662Ports | |||
| 1.3.6.1.4.1.5040.1.2.29.3.2.1 | TablewtWebGraphAnalog57662PortTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1 | RowwtWebGraphAnalog57662PortEntry | not-accessible | mandatory | Sensor parameters for the individual sensors. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.1 | ColumnwtWebGraphAnalog57662PortName | read-write | mandatory | Name of the sensor. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.2 | ColumnwtWebGraphAnalog57662PortText | read-write | mandatory | Description of the sensor. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.3 | ColumnwtWebGraphAnalog57662PortOffset1 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.4 | ColumnwtWebGraphAnalog57662SetPoint1 | read-write | mandatory | Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.5 | ColumnwtWebGraphAnalog57662PortOffset2 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.6 | ColumnwtWebGraphAnalog57662SetPoint2 | read-write | mandatory | Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.7 | ColumnwtWebGraphAnalog57662PortComment | read-write | mandatory | Offset calibration: informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.8 | ColumnwtWebGraphAnalog57662PortSensorSelect | read-write | mandatory | Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7:… |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.9 | ColumnwtWebGraphAnalog57662PortUnit | read-write | mandatory | User scale: displayed unit. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.10 | ColumnwtWebGraphAnalog57662PortScale0 | read-write | mandatory | User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999 |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.11 | ColumnwtWebGraphAnalog57662PortScale100 | read-write | mandatory | User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999 |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.12 | ColumnwtWebGraphAnalog57662PortOutputMode | read-write | mandatory | This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. If an output mode is selected, Bit… |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.13 | ColumnwtWebGraphAnalog57662PortInputMode | read-write | mandatory | This binary coded input mode defines the individual operation mode for any input. More than one mode must not be selected. If an input mode is selected, Bit 5 … |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.14 | ColumnwtWebGraphAnalog57662PortCompensationValue | read-write | mandatory | This entry is used to optimize the step response with capcitive loads. |
| 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.15 | ColumnwtWebGraphAnalog57662PortCompensationMode | read-write | mandatory | This binary coded compensation mode defines the individual operation mode for any output. If Auto adaptive is selected, the optimal value of wtWebGraphAnalog57… |
| 1.3.6.1.4.1.5040.1.2.29.3.3 | NodewtWebGraphAnalog57662Manufact | |||
| 1.3.6.1.4.1.5040.1.2.29.3.3.1 | ScalarwtWebGraphAnalog57662MfName | read-write | mandatory | Manufacturer company name |
| 1.3.6.1.4.1.5040.1.2.29.3.3.2 | ScalarwtWebGraphAnalog57662MfAddr | read-write | mandatory | Manufacturer address. |
| 1.3.6.1.4.1.5040.1.2.29.3.3.3 | ScalarwtWebGraphAnalog57662MfHotline | read-write | mandatory | Manufacturer hotline. |
| 1.3.6.1.4.1.5040.1.2.29.3.3.4 | ScalarwtWebGraphAnalog57662MfInternet | read-write | mandatory | Manufacturer Internet address. |
| 1.3.6.1.4.1.5040.1.2.29.3.3.5 | ScalarwtWebGraphAnalog57662MfDeviceTyp | read-write | mandatory | Manufacturer device name (model number). |
| 1.3.6.1.4.1.5040.1.2.29.3.3.6 | ScalarwtWebGraphAnalog57662MfOrderNo | read-write | mandatory | Manufacturer part number. |
| 1.3.6.1.4.1.5040.1.2.29.4 | NodewtWebGraphAnalog57662Diag | |||
| 1.3.6.1.4.1.5040.1.2.29.4.1 | ScalarwtWebGraphAnalog57662DiagErrorCount | read-only | mandatory | Number of entries in the error memory. |
| 1.3.6.1.4.1.5040.1.2.29.4.2 | ScalarwtWebGraphAnalog57662DiagBinaryError | read-only | mandatory | Error causes coded bit-by-bit. |
| 1.3.6.1.4.1.5040.1.2.29.4.3 | ScalarwtWebGraphAnalog57662DiagErrorIndex | read-write | mandatory | The value of this variable is used as an index to read an error massege from wtWebGraphAnalog57662DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAna… |
| 1.3.6.1.4.1.5040.1.2.29.4.4 | ScalarwtWebGraphAnalog57662DiagErrorMessage | read-only | mandatory | Using wtWebGraphAnalog57662DiagErrorIndex as an index, the appropriate message is available. |
| 1.3.6.1.4.1.5040.1.2.29.4.5 | ScalarwtWebGraphAnalog57662DiagErrorClear | write-only | mandatory | Writing 1 into this variable clears all diagnosis messages. |
| 1.3.6.1.4.1.5040.1.2.29.31 | NodewtWebGraphAnalog57662Alert1 | This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.32 | NodewtWebGraphAnalog57662Alert2 | This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.33 | NodewtWebGraphAnalog57662Alert3 | This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.34 | NodewtWebGraphAnalog57662Alert4 | This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.35 | NodewtWebGraphAnalog57662Alert5 | This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.36 | NodewtWebGraphAnalog57662Alert6 | This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.37 | NodewtWebGraphAnalog57662Alert7 | This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.38 | NodewtWebGraphAnalog57662Alert8 | This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.39 | NodewtWebGraphAnalog57662AlertReport | This SNMP trap is generated when the report was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.91 | NodewtWebGraphAnalog57662Alert9 | This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.92 | NodewtWebGraphAnalog57662Alert10 | This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.93 | NodewtWebGraphAnalog57662Alert11 | This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.94 | NodewtWebGraphAnalog57662Alert12 | This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.95 | NodewtWebGraphAnalog57662Alert13 | This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.96 | NodewtWebGraphAnalog57662Alert14 | This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.97 | NodewtWebGraphAnalog57662Alert15 | This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.98 | NodewtWebGraphAnalog57662Alert16 | This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.29.110 | NodewtWebGraphAnalog57662AlertDiag | This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. |