WebGraph-AnalogIn-57641-US-MIB
226 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5040 | Nodewut | |||
| 1.3.6.1.4.1.5040.1 | NodewtComServer | |||
| 1.3.6.1.4.1.5040.1.2 | NodewtWebio | |||
| 1.3.6.1.4.1.5040.1.2.10 | NodewtWebGraphAnalogIn57641 | |||
| 1.3.6.1.4.1.5040.1.2.10.1 | NodewtWebGraphAnalogIn57641Inventory | |||
| 1.3.6.1.4.1.5040.1.2.10.1.1 | ScalarwtWebGraphAnalogIn57641Sensors | read-only | mandatory | Number of sensors |
| 1.3.6.1.4.1.5040.1.2.10.1.2 | TablewtWebGraphAnalogIn57641SensorTable | not-accessible | mandatory | List of sensors. |
| 1.3.6.1.4.1.5040.1.2.10.1.2.1 | RowwtWebGraphAnalogIn57641SensorEntry | not-accessible | mandatory | List of sensor numbers. |
| 1.3.6.1.4.1.5040.1.2.10.1.2.1.1 | ColumnwtWebGraphAnalogIn57641SensorNo | read-only | mandatory | Sensor number. |
| 1.3.6.1.4.1.5040.1.2.10.1.3 | TablewtWebGraphAnalogIn57641ValuesTable | not-accessible | mandatory | List of measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.10.1.3.1 | RowwtWebGraphAnalogIn57641ValuesEntry | not-accessible | mandatory | Measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.10.1.3.1.1 | ColumnwtWebGraphAnalogIn57641Values | read-only | mandatory | Measurement value of the sensor, ASCII, 7 characters in length. |
| 1.3.6.1.4.1.5040.1.2.10.1.4 | TablewtWebGraphAnalogIn57641BinaryValuesTable | not-accessible | mandatory | List of binary measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.10.1.4.1 | RowwtWebGraphAnalogIn57641BinaryValuesEntry | not-accessible | mandatory | Binary measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.10.1.4.1.1 | ColumnwtWebGraphAnalogIn57641BinaryValues | read-only | mandatory | Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value. |
| 1.3.6.1.4.1.5040.1.2.10.2 | NodewtWebGraphAnalogIn57641SessCntrl | |||
| 1.3.6.1.4.1.5040.1.2.10.2.1 | ScalarwtWebGraphAnalogIn57641SessCntrlPassword | read-write | mandatory | Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalogIn57641SessCntrlLogout. When read this variable provides a string of le… |
| 1.3.6.1.4.1.5040.1.2.10.2.2 | ScalarwtWebGraphAnalogIn57641SessCntrlConfigMode | read-only | mandatory | When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is… |
| 1.3.6.1.4.1.5040.1.2.10.2.3 | ScalarwtWebGraphAnalogIn57641SessCntrlLogout | read-write | mandatory | If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters ar… |
| 1.3.6.1.4.1.5040.1.2.10.2.4 | ScalarwtWebGraphAnalogIn57641SessCntrlAdminPassword | read-write | mandatory | This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid p… |
| 1.3.6.1.4.1.5040.1.2.10.2.5 | ScalarwtWebGraphAnalogIn57641SessCntrlConfigPassword | read-write | mandatory | This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was ass… |
| 1.3.6.1.4.1.5040.1.2.10.3 | NodewtWebGraphAnalogIn57641Config | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1 | NodewtWebGraphAnalogIn57641Device | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.1 | NodewtWebGraphAnalogIn57641Text | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.1.1 | ScalarwtWebGraphAnalogIn57641DeviceName | read-write | mandatory | Name of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.1.2 | ScalarwtWebGraphAnalogIn57641DeviceText | read-write | mandatory | Description of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.1.3 | ScalarwtWebGraphAnalogIn57641DeviceLocation | read-write | mandatory | Description of the location of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.1.4 | ScalarwtWebGraphAnalogIn57641DeviceContact | read-write | mandatory | Contact address of the system operator of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2 | NodewtWebGraphAnalogIn57641TimeDate | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1 | NodewtWebGraphAnalogIn57641TimeZone | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.1 | ScalarwtWebGraphAnalogIn57641TzOffsetHrs | read-write | mandatory | Offset hours for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.2 | ScalarwtWebGraphAnalogIn57641TzOffsetMin | read-write | mandatory | Offset minutes for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.3 | ScalarwtWebGraphAnalogIn57641TzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.4 | ScalarwtWebGraphAnalogIn57641StTzOffsetHrs | read-write | mandatory | Offset hours of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.5 | ScalarwtWebGraphAnalogIn57641StTzOffsetMin | read-write | mandatory | Offset minutes of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.6 | ScalarwtWebGraphAnalogIn57641StTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.7 | ScalarwtWebGraphAnalogIn57641StTzStartMonth | read-write | mandatory | Month in which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.8 | ScalarwtWebGraphAnalogIn57641StTzStartMode | read-write | mandatory | Mode of the day of the week for which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.9 | ScalarwtWebGraphAnalogIn57641StTzStartWday | read-write | mandatory | Day of the week on which the change is made from winter time to summer time |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.10 | ScalarwtWebGraphAnalogIn57641StTzStartHrs | read-write | mandatory | Hour in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.11 | ScalarwtWebGraphAnalogIn57641StTzStartMin | read-write | mandatory | Minute in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.12 | ScalarwtWebGraphAnalogIn57641StTzStopMonth | read-write | mandatory | Month in which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.13 | ScalarwtWebGraphAnalogIn57641StTzStopMode | read-write | mandatory | Mode of the week day on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.14 | ScalarwtWebGraphAnalogIn57641StTzStopWday | read-write | mandatory | Day of the week on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.15 | ScalarwtWebGraphAnalogIn57641StTzStopHrs | read-write | mandatory | Hour at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.1.16 | ScalarwtWebGraphAnalogIn57641StTzStopMin | read-write | mandatory | Minute at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.2 | NodewtWebGraphAnalogIn57641TimeServer | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.2.1 | ScalarwtWebGraphAnalogIn57641TimeServer1 | read-write | mandatory | IP address or name of the 1st time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.2.2 | ScalarwtWebGraphAnalogIn57641TimeServer2 | read-write | mandatory | IP address or name of the 2nd time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.2.3 | ScalarwtWebGraphAnalogIn57641TsEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.2.4 | ScalarwtWebGraphAnalogIn57641TsSyncTime | read-write | mandatory | Daily synchronisation time with the time server (hour: 0-23). |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.3 | NodewtWebGraphAnalogIn57641DeviceClock | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.3.1 | ScalarwtWebGraphAnalogIn57641ClockHrs | read-write | mandatory | Clock hours taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.3.2 | ScalarwtWebGraphAnalogIn57641ClockMin | read-write | mandatory | Clock minutes taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.3.3 | ScalarwtWebGraphAnalogIn57641ClockDay | read-write | mandatory | Date: Day of the month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.3.4 | ScalarwtWebGraphAnalogIn57641ClockMonth | read-write | mandatory | Date: Month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.2.3.5 | ScalarwtWebGraphAnalogIn57641ClockYear | read-write | mandatory | Date: Year, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3 | NodewtWebGraphAnalogIn57641Basic | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.1 | NodewtWebGraphAnalogIn57641Network | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.1.1 | ScalarwtWebGraphAnalogIn57641IpAddress | read-write | mandatory | IP address of the Webio |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.1.2 | ScalarwtWebGraphAnalogIn57641SubnetMask | read-write | mandatory | Subnet mask of the Webio |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.1.3 | ScalarwtWebGraphAnalogIn57641Gateway | read-write | mandatory | Gateway of the Webio |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.1.4 | ScalarwtWebGraphAnalogIn57641DnsServer1 | read-write | mandatory | IP address of the 1st DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.1.5 | ScalarwtWebGraphAnalogIn57641DnsServer2 | read-write | mandatory | IP address of the 2nd DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.1.6 | ScalarwtWebGraphAnalogIn57641AddConfig | read-write | mandatory | Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.2 | NodewtWebGraphAnalogIn57641HTTP | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.1 | ScalarwtWebGraphAnalogIn57641Startup | read-write | mandatory | Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selecte… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2 | ScalarwtWebGraphAnalogIn57641GetHeaderEnable | read-write | mandatory | If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Oc… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.3 | ScalarwtWebGraphAnalogIn57641HttpPort | read-write | mandatory | Definition of the standard HTML port (Default: 80). |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3 | NodewtWebGraphAnalogIn57641Mail | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.1 | ScalarwtWebGraphAnalogIn57641MailAdName | read-write | mandatory | Device name for mail administration. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.2 | ScalarwtWebGraphAnalogIn57641MailReply | read-write | mandatory | Reply address for the mail server. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.3 | ScalarwtWebGraphAnalogIn57641MailServer | read-write | mandatory | Name or IP address of the mail server. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4 | ScalarwtWebioAn1MailEnable | read-write | mandatory | Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.5 | ScalarwtWebGraphAnalogIn57641MailAuthentication | read-write | mandatory | Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: u… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.6 | ScalarwtWebGraphAnalogIn57641MailAuthUser | read-write | mandatory | Name of the user to be authenticated. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.7 | ScalarwtWebGraphAnalogIn57641MailAuthPassword | read-write | mandatory | Authentication password. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.8 | ScalarwtWebGraphAnalogIn57641MailPop3Server | read-write | mandatory | Name or Ip-address of the POP3 Servers. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.4 | NodewtWebGraphAnalogIn57641SNMP | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.4.1 | ScalarwtWebGraphAnalogIn57641SnmpCommunityStringRead | read-write | mandatory | Community string read only |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.4.2 | ScalarwtWebGraphAnalogIn57641SnmpCommunityStringReadWrite | read-write | mandatory | Community string read / write |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.4.3 | ScalarwtWebGraphAnalogIn57641SystemTrapManagerIP | read-write | mandatory | Name or IP address of the TCP server which accepts the system trap. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.4.4 | ScalarwtWebGraphAnalogIn57641SystemTrapEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.4.5 | ScalarwtWebGraphAnalogIn57641SnmpEnable | read-write | mandatory | Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compare… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.4.6 | ScalarwtWebGraphAnalogIn57641SnmpCommunityStringTrap | read-write | mandatory | Community string send within traps. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.5 | NodewtWebGraphAnalogIn57641UDP | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.5.1 | ScalarwtWebGraphAnalogIn57641UdpPort | read-write | mandatory | Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.5.2 | ScalarwtWebGraphAnalogIn57641UdpEnable | read-write | mandatory | Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.6 | NodewtWebGraphAnalogIn57641Syslog | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.6.1 | ScalarwtWebGraphAnalogIn57641SyslogServerIP | read-write | mandatory | Name or IP address of the Syslog server, which accepts the Syslog messgaes. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.6.2 | ScalarwtWebGraphAnalogIn57641SyslogServerPort | read-write | mandatory | Portnumber of the Syslog servers, default 514. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.6.3 | ScalarwtWebGraphAnalogIn57641SyslogSystemMessagesEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.6.4 | ScalarwtWebGraphAnalogIn57641SyslogEnable | read-write | mandatory | Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7 | NodewtWebGraphAnalogIn57641FTP | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7.1 | ScalarwtWebGraphAnalogIn57641FTPServerIP | read-write | mandatory | Name or IP address of the FTP server, which accepts the FTP messages. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7.2 | ScalarwtWebGraphAnalogIn57641FTPServerControlPort | read-write | mandatory | Portnumber of the control port of the FTP server, default 21. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7.3 | ScalarwtWebGraphAnalogIn57641FTPUserName | read-write | mandatory | FTP Loggin: user name. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7.4 | ScalarwtWebGraphAnalogIn57641FTPPassword | read-write | mandatory | FTP Loggin: user password. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7.5 | ScalarwtWebGraphAnalogIn57641FTPAccount | read-write | mandatory | FTP Loggin: name of account. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7.6 | ScalarwtWebGraphAnalogIn57641FTPOption | read-write | mandatory | Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.7.7 | ScalarwtWebGraphAnalogIn57641FTPEnable | read-write | mandatory | Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4 | NodewtWebGraphAnalogIn57641Datalogger | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.1 | ScalarwtWebGraphAnalogIn57641LoggerTimebase | read-write | mandatory | Time base of the data logger |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.2 | ScalarwtWebGraphAnalogIn57641LoggerSensorSel | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.3 | ScalarwtWebGraphAnalogIn57641DisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.4 | TablewtWebGraphAnalogIn57641SensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1 | RowwtWebGraphAnalogIn57641SensorColorEntry | not-accessible | mandatory | Index numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1.1 | ColumnwtWebGraphAnalogIn57641SensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.5 | ScalarwtWebGraphAnalogIn57641AutoScaleEnable | read-write | mandatory | If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.6 | ScalarwtWebGraphAnalogIn57641VerticalUpperLimit | read-write | mandatory | This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.7 | ScalarwtWebGraphAnalogIn57641VerticalLowerLimit | read-write | mandatory | This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.4.8 | ScalarwtWebGraphAnalogIn57641HorizontalZoom | read-write | mandatory | Defines the default zoom stage, if no auto scaling is selected. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5 | NodewtWebGraphAnalogIn57641Alarm | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.1 | ScalarwtWebGraphAnalogIn57641AlarmCount | read-only | mandatory | Number of independent alarms. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.2 | TablewtWebGraphAnalogIn57641AlarmIfTable | not-accessible | mandatory | List of alarm indices. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1 | RowwtWebGraphAnalogIn57641AlarmIfEntry | not-accessible | mandatory | Numbers of the alarms. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1.1 | ColumnwtWebGraphAnalogIn57641AlarmNo | read-only | mandatory | Alarm number. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3 | TablewtWebGraphAnalogIn57641AlarmTable | not-accessible | mandatory | List of settings depending on the alarm number. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1 | RowwtWebGraphAnalogIn57641AlarmEntry | not-accessible | mandatory | Alarm parameters of the individual alarms. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.1 | ColumnwtWebGraphAnalogIn57641AlarmTrigger | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.2 | ColumnwtWebGraphAnalogIn57641AlarmMin | read-write | mandatory | Minimum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.3 | ColumnwtWebGraphAnalogIn57641AlarmMax | read-write | mandatory | Maximum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.4 | ColumnwtWebGraphAnalogIn57641AlarmHysteresis | read-write | mandatory | Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.5 | ColumnwtWebGraphAnalogIn57641AlarmDelay | read-write | mandatory | Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.6 | ColumnwtWebGraphAnalogIn57641AlarmInterval | read-write | mandatory | Send interval for alarm messages. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.7 | ColumnwtWebGraphAnalogIn57641AlarmEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.8 | ColumnwtWebGraphAnalogIn57641AlarmEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.9 | ColumnwtWebGraphAnalogIn57641AlarmMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.10 | ColumnwtWebGraphAnalogIn57641AlarmMailText | read-write | mandatory | Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.11 | ColumnwtWebGraphAnalogIn57641AlarmManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.12 | ColumnwtWebGraphAnalogIn57641AlarmTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.13 | ColumnwtWebGraphAnalogIn57641AlarmMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.14 | ColumnwtWebGraphAnalogIn57641AlarmTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.15 | ColumnwtWebGraphAnalogIn57641AlarmTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.16 | ColumnwtWebGraphAnalogIn57641AlarmTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.17 | ColumnwtWebGraphAnalogIn57641AlarmClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.18 | ColumnwtWebGraphAnalogIn57641AlarmClearMailText | read-write | mandatory | Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.19 | ColumnwtWebGraphAnalogIn57641AlarmClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.20 | ColumnwtWebGraphAnalogIn57641AlarmClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.21 | ColumnwtWebGraphAnalogIn57641Alarm2Min | read-write | mandatory | Minimum rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.22 | ColumnwtWebGraphAnalogIn57641Alarm2Max | read-write | mandatory | Maximum rel.Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.23 | ColumnwtWebGraphAnalogIn57641Alarm2Hysteresis | read-write | mandatory | Hysterese rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.24 | ColumnwtWebGraphAnalogIn57641AlarmSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.25 | ColumnwtWebGraphAnalogIn57641AlarmSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.26 | ColumnwtWebGraphAnalogIn57641AlarmSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.27 | ColumnwtWebGraphAnalogIn57641AlarmSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of … |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.28 | ColumnwtWebGraphAnalogIn57641AlarmFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.29 | ColumnwtWebGraphAnalogIn57641AlarmFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.30 | ColumnwtWebGraphAnalogIn57641AlarmFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.31 | ColumnwtWebGraphAnalogIn57641AlarmFtpClearText | read-write | mandatory | Alarm clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.32 | ColumnwtWebGraphAnalogIn57641AlarmFtpOption | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.33 | ColumnwtWebGraphAnalogIn57641AlarmTimerCron | read-write | mandatory | This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday … |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6 | NodewtWebGraphAnalogIn57641Graphics | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.1 | NodewtWebGraphAnalogIn57641GraphicsBase | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.1.1 | ScalarwtWebGraphAnalogIn57641GraphicsBaseEnable | read-write | mandatory | Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.1.2 | ScalarwtWebGraphAnalogIn57641GraphicsBaseWidth | read-write | mandatory | Defines the width of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.1.3 | ScalarwtWebGraphAnalogIn57641GraphicsBaseHeight | read-write | mandatory | Defines the height of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.1.4 | ScalarwtWebGraphAnalogIn57641GraphicsBaseFrameColor | read-write | mandatory | Frame color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.1.5 | ScalarwtWebGraphAnalogIn57641GraphicsBaseBackgroundColor | read-write | mandatory | Background color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.1.6 | ScalarwtWebGraphAnalogIn57641GraphicsBasePollingrate | read-write | mandatory | Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.2 | NodewtWebGraphAnalogIn57641GraphicsSelect | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.2.1 | ScalarwtWebGraphAnalogIn57641GraphicsSelectDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.2.2 | ScalarwtWebGraphAnalogIn57641GraphicsSelectDisplayShowExtrem | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sens… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3 | TablewtWebGraphAnalogIn57641SensorColor2Table | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1 | RowwtWebGraphAnalogIn57641SensorColor2Entry | not-accessible | mandatory | Numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.1 | ColumnwtWebGraphAnalogIn57641GraphicsSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.2 | ColumnwtWebGraphAnalogIn57641GraphicsSelectScale | read-write | mandatory | Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit … |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3 | NodewtWebGraphAnalogIn57641GraphicsScale | |||
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.1 | ScalarwtWebGraphAnalogIn57641GraphicsScaleAutoScaleEnable | read-write | mandatory | Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 … |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.2 | ScalarwtWebGraphAnalogIn57641GraphicsScaleAutoFitEnable | read-write | mandatory | Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Sca… |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.3 | ScalarwtWebGraphAnalogIn57641GraphicsScale1Min | read-only | mandatory | Scale 1: Minimum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.4 | ScalarwtWebGraphAnalogIn57641GraphicsScale2Min | read-only | mandatory | Scale 2: Minimum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.5 | ScalarwtWebGraphAnalogIn57641GraphicsScale3Min | read-only | mandatory | Scale 3: Minimum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.6 | ScalarwtWebGraphAnalogIn57641GraphicsScale4Min | read-only | mandatory | Scale 4: Minimum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.7 | ScalarwtWebGraphAnalogIn57641GraphicsScale1Max | read-only | mandatory | Scale 1: Maximum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.8 | ScalarwtWebGraphAnalogIn57641GraphicsScale2Max | read-only | mandatory | Scale 2: Maximum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.9 | ScalarwtWebGraphAnalogIn57641GraphicsScale3Max | read-only | mandatory | Scale 3: Maximum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.10 | ScalarwtWebGraphAnalogIn57641GraphicsScale4Max | read-only | mandatory | Scale 4: Maximum. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.11 | ScalarwtWebGraphAnalogIn57641GraphicsScale1Unit | read-only | mandatory | Scale 1: Unit. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.12 | ScalarwtWebGraphAnalogIn57641GraphicsScale2Unit | read-only | mandatory | Scale 2: Unit. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.13 | ScalarwtWebGraphAnalogIn57641GraphicsScale3Unit | read-only | mandatory | Scale 3: Unit. |
| 1.3.6.1.4.1.5040.1.2.10.3.1.6.3.14 | ScalarwtWebGraphAnalogIn57641GraphicsScale4Unit | read-only | mandatory | Scale 4: Unit. |
| 1.3.6.1.4.1.5040.1.2.10.3.2 | NodewtWebGraphAnalogIn57641Ports | |||
| 1.3.6.1.4.1.5040.1.2.10.3.2.1 | TablewtWebGraphAnalogIn57641PortTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1 | RowwtWebGraphAnalogIn57641PortEntry | not-accessible | mandatory | Sensor parameters for the individual sensors. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.1 | ColumnwtWebGraphAnalogIn57641PortName | read-write | mandatory | Name of the sensor. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.2 | ColumnwtWebGraphAnalogIn57641PortText | read-write | mandatory | Description of the sensor. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.3 | ColumnwtWebGraphAnalogIn57641PortOffset1 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.4 | ColumnwtWebGraphAnalogIn57641SetPoint1 | read-write | mandatory | Offset calibration: set point 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.5 | ColumnwtWebGraphAnalogIn57641PortOffset2 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.6 | ColumnwtWebGraphAnalogIn57641SetPoint2 | read-write | mandatory | Offset calibration: set point 2 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.7 | ColumnwtWebGraphAnalogIn57641PortComment | read-write | mandatory | Offset calibration: informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.8 | ColumnwtWebGraphAnalogIn57641PortSensorSelect | read-write | mandatory | Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7:… |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.9 | ColumnwtWebGraphAnalogIn57641PortUnit | read-write | mandatory | User scale: displayed unit. |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.10 | ColumnwtWebGraphAnalogIn57641PortScale0 | read-write | mandatory | User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999 |
| 1.3.6.1.4.1.5040.1.2.10.3.2.1.1.11 | ColumnwtWebGraphAnalogIn57641PortScale100 | read-write | mandatory | User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999 |
| 1.3.6.1.4.1.5040.1.2.10.3.3 | NodewtWebGraphAnalogIn57641Manufact | |||
| 1.3.6.1.4.1.5040.1.2.10.3.3.1 | ScalarwtWebGraphAnalogIn57641MfName | read-write | mandatory | Manufacturer company name |
| 1.3.6.1.4.1.5040.1.2.10.3.3.2 | ScalarwtWebGraphAnalogIn57641MfAddr | read-write | mandatory | Manufacturer address. |
| 1.3.6.1.4.1.5040.1.2.10.3.3.3 | ScalarwtWebGraphAnalogIn57641MfHotline | read-write | mandatory | Manufacturer hotline. |
| 1.3.6.1.4.1.5040.1.2.10.3.3.4 | ScalarwtWebGraphAnalogIn57641MfInternet | read-write | mandatory | Manufacturer Internet address. |
| 1.3.6.1.4.1.5040.1.2.10.3.3.5 | ScalarwtWebGraphAnalogIn57641MfDeviceTyp | read-write | mandatory | Manufacturer device name (model number). |
| 1.3.6.1.4.1.5040.1.2.10.3.3.6 | ScalarwtWebGraphAnalogIn57641MfOrderNo | read-write | mandatory | Manufacturer part number. |
| 1.3.6.1.4.1.5040.1.2.10.4 | NodewtWebGraphAnalogIn57641Diag | |||
| 1.3.6.1.4.1.5040.1.2.10.4.1 | ScalarwtWebGraphAnalogIn57641DiagErrorCount | read-only | mandatory | Number of entries in the error memory. |
| 1.3.6.1.4.1.5040.1.2.10.4.2 | ScalarwtWebGraphAnalogIn57641DiagBinaryError | read-only | mandatory | Error causes coded bit-by-bit. |
| 1.3.6.1.4.1.5040.1.2.10.4.3 | ScalarwtWebGraphAnalogIn57641DiagErrorIndex | read-write | mandatory | The value of this variable is used as an index to read an error massege from wtWebGraphAnalogIn57641DiagErrorMessage. Errors are numbered from 1 to wtWebGraphA… |
| 1.3.6.1.4.1.5040.1.2.10.4.4 | ScalarwtWebGraphAnalogIn57641DiagErrorMessage | read-only | mandatory | Using wtWebGraphAnalogIn57641DiagErrorIndex as an index, the appropriate message is available. |
| 1.3.6.1.4.1.5040.1.2.10.4.5 | ScalarwtWebGraphAnalogIn57641DiagErrorClear | write-only | mandatory | Writing 1 into this variable clears all diagnosis messages. |
| 1.3.6.1.4.1.5040.1.2.10.31 | NodewtWebGraphAnalogIn57641Alert1 | This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.32 | NodewtWebGraphAnalogIn57641Alert2 | This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.33 | NodewtWebGraphAnalogIn57641Alert3 | This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.34 | NodewtWebGraphAnalogIn57641Alert4 | This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.35 | NodewtWebGraphAnalogIn57641Alert5 | This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.36 | NodewtWebGraphAnalogIn57641Alert6 | This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.37 | NodewtWebGraphAnalogIn57641Alert7 | This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.38 | NodewtWebGraphAnalogIn57641Alert8 | This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.91 | NodewtWebGraphAnalogIn57641Alert9 | This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.92 | NodewtWebGraphAnalogIn57641Alert10 | This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.93 | NodewtWebGraphAnalogIn57641Alert11 | This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.94 | NodewtWebGraphAnalogIn57641Alert12 | This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.95 | NodewtWebGraphAnalogIn57641Alert13 | This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.96 | NodewtWebGraphAnalogIn57641Alert14 | This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.97 | NodewtWebGraphAnalogIn57641Alert15 | This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.98 | NodewtWebGraphAnalogIn57641Alert16 | This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.10.110 | NodewtWebGraphAnalogIn57641AlertDiag | This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. |