WebGraph-AnalogIn-57643-US-MIB
226 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5040 | Nodewut | |||
| 1.3.6.1.4.1.5040.1 | NodewtComServer | |||
| 1.3.6.1.4.1.5040.1.2 | NodewtWebio | |||
| 1.3.6.1.4.1.5040.1.2.12 | NodewtWebGraphAnalogIn57643 | |||
| 1.3.6.1.4.1.5040.1.2.12.1 | NodewtWebGraphAnalogIn57643Inventory | |||
| 1.3.6.1.4.1.5040.1.2.12.1.1 | ScalarwtWebGraphAnalogIn57643Sensors | read-only | mandatory | Number of sensors |
| 1.3.6.1.4.1.5040.1.2.12.1.2 | TablewtWebGraphAnalogIn57643SensorTable | not-accessible | mandatory | List of sensors. |
| 1.3.6.1.4.1.5040.1.2.12.1.2.1 | RowwtWebGraphAnalogIn57643SensorEntry | not-accessible | mandatory | List of sensor numbers. |
| 1.3.6.1.4.1.5040.1.2.12.1.2.1.1 | ColumnwtWebGraphAnalogIn57643SensorNo | read-only | mandatory | Sensor number. |
| 1.3.6.1.4.1.5040.1.2.12.1.3 | TablewtWebGraphAnalogIn57643ValuesTable | not-accessible | mandatory | List of measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.12.1.3.1 | RowwtWebGraphAnalogIn57643ValuesEntry | not-accessible | mandatory | Measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.12.1.3.1.1 | ColumnwtWebGraphAnalogIn57643Values | read-only | mandatory | Measurement value of the sensor, ASCII, 7 characters in length. |
| 1.3.6.1.4.1.5040.1.2.12.1.4 | TablewtWebGraphAnalogIn57643BinaryValuesTable | not-accessible | mandatory | List of binary measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.12.1.4.1 | RowwtWebGraphAnalogIn57643BinaryValuesEntry | not-accessible | mandatory | Binary measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.12.1.4.1.1 | ColumnwtWebGraphAnalogIn57643BinaryValues | read-only | mandatory | Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value. |
| 1.3.6.1.4.1.5040.1.2.12.2 | NodewtWebGraphAnalogIn57643SessCntrl | |||
| 1.3.6.1.4.1.5040.1.2.12.2.1 | ScalarwtWebGraphAnalogIn57643SessCntrlPassword | read-write | mandatory | Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalogIn57643SessCntrlLogout. When read this variable provides a string of le… |
| 1.3.6.1.4.1.5040.1.2.12.2.2 | ScalarwtWebGraphAnalogIn57643SessCntrlConfigMode | read-only | mandatory | When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is… |
| 1.3.6.1.4.1.5040.1.2.12.2.3 | ScalarwtWebGraphAnalogIn57643SessCntrlLogout | read-write | mandatory | If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters ar… |
| 1.3.6.1.4.1.5040.1.2.12.2.4 | ScalarwtWebGraphAnalogIn57643SessCntrlAdminPassword | read-write | mandatory | This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid p… |
| 1.3.6.1.4.1.5040.1.2.12.2.5 | ScalarwtWebGraphAnalogIn57643SessCntrlConfigPassword | read-write | mandatory | This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was ass… |
| 1.3.6.1.4.1.5040.1.2.12.3 | NodewtWebGraphAnalogIn57643Config | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1 | NodewtWebGraphAnalogIn57643Device | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.1 | NodewtWebGraphAnalogIn57643Text | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.1.1 | ScalarwtWebGraphAnalogIn57643DeviceName | read-write | mandatory | Name of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.1.2 | ScalarwtWebGraphAnalogIn57643DeviceText | read-write | mandatory | Description of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.1.3 | ScalarwtWebGraphAnalogIn57643DeviceLocation | read-write | mandatory | Description of the location of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.1.4 | ScalarwtWebGraphAnalogIn57643DeviceContact | read-write | mandatory | Contact address of the system operator of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2 | NodewtWebGraphAnalogIn57643TimeDate | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1 | NodewtWebGraphAnalogIn57643TimeZone | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.1 | ScalarwtWebGraphAnalogIn57643TzOffsetHrs | read-write | mandatory | Offset hours for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.2 | ScalarwtWebGraphAnalogIn57643TzOffsetMin | read-write | mandatory | Offset minutes for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.3 | ScalarwtWebGraphAnalogIn57643TzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.4 | ScalarwtWebGraphAnalogIn57643StTzOffsetHrs | read-write | mandatory | Offset hours of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.5 | ScalarwtWebGraphAnalogIn57643StTzOffsetMin | read-write | mandatory | Offset minutes of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.6 | ScalarwtWebGraphAnalogIn57643StTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.7 | ScalarwtWebGraphAnalogIn57643StTzStartMonth | read-write | mandatory | Month in which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.8 | ScalarwtWebGraphAnalogIn57643StTzStartMode | read-write | mandatory | Mode of the day of the week for which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.9 | ScalarwtWebGraphAnalogIn57643StTzStartWday | read-write | mandatory | Day of the week on which the change is made from winter time to summer time |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.10 | ScalarwtWebGraphAnalogIn57643StTzStartHrs | read-write | mandatory | Hour in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.11 | ScalarwtWebGraphAnalogIn57643StTzStartMin | read-write | mandatory | Minute in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.12 | ScalarwtWebGraphAnalogIn57643StTzStopMonth | read-write | mandatory | Month in which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.13 | ScalarwtWebGraphAnalogIn57643StTzStopMode | read-write | mandatory | Mode of the week day on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.14 | ScalarwtWebGraphAnalogIn57643StTzStopWday | read-write | mandatory | Day of the week on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.15 | ScalarwtWebGraphAnalogIn57643StTzStopHrs | read-write | mandatory | Hour at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.1.16 | ScalarwtWebGraphAnalogIn57643StTzStopMin | read-write | mandatory | Minute at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.2 | NodewtWebGraphAnalogIn57643TimeServer | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.2.1 | ScalarwtWebGraphAnalogIn57643TimeServer1 | read-write | mandatory | IP address or name of the 1st time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.2.2 | ScalarwtWebGraphAnalogIn57643TimeServer2 | read-write | mandatory | IP address or name of the 2nd time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.2.3 | ScalarwtWebGraphAnalogIn57643TsEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.2.4 | ScalarwtWebGraphAnalogIn57643TsSyncTime | read-write | mandatory | Daily synchronisation time with the time server (hour: 0-23). |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.3 | NodewtWebGraphAnalogIn57643DeviceClock | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.3.1 | ScalarwtWebGraphAnalogIn57643ClockHrs | read-write | mandatory | Clock hours taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.3.2 | ScalarwtWebGraphAnalogIn57643ClockMin | read-write | mandatory | Clock minutes taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.3.3 | ScalarwtWebGraphAnalogIn57643ClockDay | read-write | mandatory | Date: Day of the month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.3.4 | ScalarwtWebGraphAnalogIn57643ClockMonth | read-write | mandatory | Date: Month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.2.3.5 | ScalarwtWebGraphAnalogIn57643ClockYear | read-write | mandatory | Date: Year, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3 | NodewtWebGraphAnalogIn57643Basic | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.1 | NodewtWebGraphAnalogIn57643Network | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.1.1 | ScalarwtWebGraphAnalogIn57643IpAddress | read-write | mandatory | IP address of the Webio |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.1.2 | ScalarwtWebGraphAnalogIn57643SubnetMask | read-write | mandatory | Subnet mask of the Webio |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.1.3 | ScalarwtWebGraphAnalogIn57643Gateway | read-write | mandatory | Gateway of the Webio |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.1.4 | ScalarwtWebGraphAnalogIn57643DnsServer1 | read-write | mandatory | IP address of the 1st DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.1.5 | ScalarwtWebGraphAnalogIn57643DnsServer2 | read-write | mandatory | IP address of the 2nd DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.1.6 | ScalarwtWebGraphAnalogIn57643AddConfig | read-write | mandatory | Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.2 | NodewtWebGraphAnalogIn57643HTTP | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.2.1 | ScalarwtWebGraphAnalogIn57643Startup | read-write | mandatory | Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selecte… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.2.2 | ScalarwtWebGraphAnalogIn57643GetHeaderEnable | read-write | mandatory | If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Oc… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.2.3 | ScalarwtWebGraphAnalogIn57643HttpPort | read-write | mandatory | Definition of the standard HTML port (Default: 80). |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3 | NodewtWebGraphAnalogIn57643Mail | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.1 | ScalarwtWebGraphAnalogIn57643MailAdName | read-write | mandatory | Device name for mail administration. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.2 | ScalarwtWebGraphAnalogIn57643MailReply | read-write | mandatory | Reply address for the mail server. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.3 | ScalarwtWebGraphAnalogIn57643MailServer | read-write | mandatory | Name or IP address of the mail server. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.4 | ScalarwtWebioAn1MailEnable | read-write | mandatory | Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.5 | ScalarwtWebGraphAnalogIn57643MailAuthentication | read-write | mandatory | Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: u… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.6 | ScalarwtWebGraphAnalogIn57643MailAuthUser | read-write | mandatory | Name of the user to be authenticated. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.7 | ScalarwtWebGraphAnalogIn57643MailAuthPassword | read-write | mandatory | Authentication password. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.3.8 | ScalarwtWebGraphAnalogIn57643MailPop3Server | read-write | mandatory | Name or Ip-address of the POP3 Servers. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.4 | NodewtWebGraphAnalogIn57643SNMP | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.4.1 | ScalarwtWebGraphAnalogIn57643SnmpCommunityStringRead | read-write | mandatory | Community string read only |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.4.2 | ScalarwtWebGraphAnalogIn57643SnmpCommunityStringReadWrite | read-write | mandatory | Community string read / write |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.4.3 | ScalarwtWebGraphAnalogIn57643SystemTrapManagerIP | read-write | mandatory | Name or IP address of the TCP server which accepts the system trap. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.4.4 | ScalarwtWebGraphAnalogIn57643SystemTrapEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.4.5 | ScalarwtWebGraphAnalogIn57643SnmpEnable | read-write | mandatory | Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compare… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.4.6 | ScalarwtWebGraphAnalogIn57643SnmpCommunityStringTrap | read-write | mandatory | Community string send within traps. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.5 | NodewtWebGraphAnalogIn57643UDP | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.5.1 | ScalarwtWebGraphAnalogIn57643UdpPort | read-write | mandatory | Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.5.2 | ScalarwtWebGraphAnalogIn57643UdpEnable | read-write | mandatory | Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.6 | NodewtWebGraphAnalogIn57643Syslog | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.6.1 | ScalarwtWebGraphAnalogIn57643SyslogServerIP | read-write | mandatory | Name or IP address of the Syslog server, which accepts the Syslog messgaes. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.6.2 | ScalarwtWebGraphAnalogIn57643SyslogServerPort | read-write | mandatory | Portnumber of the Syslog servers, default 514. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.6.3 | ScalarwtWebGraphAnalogIn57643SyslogSystemMessagesEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.6.4 | ScalarwtWebGraphAnalogIn57643SyslogEnable | read-write | mandatory | Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7 | NodewtWebGraphAnalogIn57643FTP | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7.1 | ScalarwtWebGraphAnalogIn57643FTPServerIP | read-write | mandatory | Name or IP address of the FTP server, which accepts the FTP messages. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7.2 | ScalarwtWebGraphAnalogIn57643FTPServerControlPort | read-write | mandatory | Portnumber of the control port of the FTP server, default 21. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7.3 | ScalarwtWebGraphAnalogIn57643FTPUserName | read-write | mandatory | FTP Loggin: user name. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7.4 | ScalarwtWebGraphAnalogIn57643FTPPassword | read-write | mandatory | FTP Loggin: user password. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7.5 | ScalarwtWebGraphAnalogIn57643FTPAccount | read-write | mandatory | FTP Loggin: name of account. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7.6 | ScalarwtWebGraphAnalogIn57643FTPOption | read-write | mandatory | Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.12.3.1.3.7.7 | ScalarwtWebGraphAnalogIn57643FTPEnable | read-write | mandatory | Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4 | NodewtWebGraphAnalogIn57643Datalogger | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.1 | ScalarwtWebGraphAnalogIn57643LoggerTimebase | read-write | mandatory | Time base of the data logger |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.2 | ScalarwtWebGraphAnalogIn57643LoggerSensorSel | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.3 | ScalarwtWebGraphAnalogIn57643DisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.4 | TablewtWebGraphAnalogIn57643SensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1 | RowwtWebGraphAnalogIn57643SensorColorEntry | not-accessible | mandatory | Index numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1.1 | ColumnwtWebGraphAnalogIn57643SensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.5 | ScalarwtWebGraphAnalogIn57643AutoScaleEnable | read-write | mandatory | If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.6 | ScalarwtWebGraphAnalogIn57643VerticalUpperLimit | read-write | mandatory | This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.7 | ScalarwtWebGraphAnalogIn57643VerticalLowerLimit | read-write | mandatory | This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.4.8 | ScalarwtWebGraphAnalogIn57643HorizontalZoom | read-write | mandatory | Defines the default zoom stage, if no auto scaling is selected. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5 | NodewtWebGraphAnalogIn57643Alarm | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.1 | ScalarwtWebGraphAnalogIn57643AlarmCount | read-only | mandatory | Number of independent alarms. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.2 | TablewtWebGraphAnalogIn57643AlarmIfTable | not-accessible | mandatory | List of alarm indices. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1 | RowwtWebGraphAnalogIn57643AlarmIfEntry | not-accessible | mandatory | Numbers of the alarms. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1.1 | ColumnwtWebGraphAnalogIn57643AlarmNo | read-only | mandatory | Alarm number. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3 | TablewtWebGraphAnalogIn57643AlarmTable | not-accessible | mandatory | List of settings depending on the alarm number. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1 | RowwtWebGraphAnalogIn57643AlarmEntry | not-accessible | mandatory | Alarm parameters of the individual alarms. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.1 | ColumnwtWebGraphAnalogIn57643AlarmTrigger | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.2 | ColumnwtWebGraphAnalogIn57643AlarmMin | read-write | mandatory | Minimum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.3 | ColumnwtWebGraphAnalogIn57643AlarmMax | read-write | mandatory | Maximum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.4 | ColumnwtWebGraphAnalogIn57643AlarmHysteresis | read-write | mandatory | Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.5 | ColumnwtWebGraphAnalogIn57643AlarmDelay | read-write | mandatory | Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.6 | ColumnwtWebGraphAnalogIn57643AlarmInterval | read-write | mandatory | Send interval for alarm messages. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.7 | ColumnwtWebGraphAnalogIn57643AlarmEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.8 | ColumnwtWebGraphAnalogIn57643AlarmEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.9 | ColumnwtWebGraphAnalogIn57643AlarmMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.10 | ColumnwtWebGraphAnalogIn57643AlarmMailText | read-write | mandatory | Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.11 | ColumnwtWebGraphAnalogIn57643AlarmManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.12 | ColumnwtWebGraphAnalogIn57643AlarmTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.13 | ColumnwtWebGraphAnalogIn57643AlarmMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.14 | ColumnwtWebGraphAnalogIn57643AlarmTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.15 | ColumnwtWebGraphAnalogIn57643AlarmTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.16 | ColumnwtWebGraphAnalogIn57643AlarmTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.17 | ColumnwtWebGraphAnalogIn57643AlarmClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.18 | ColumnwtWebGraphAnalogIn57643AlarmClearMailText | read-write | mandatory | Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.19 | ColumnwtWebGraphAnalogIn57643AlarmClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.20 | ColumnwtWebGraphAnalogIn57643AlarmClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.21 | ColumnwtWebGraphAnalogIn57643Alarm2Min | read-write | mandatory | Minimum rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.22 | ColumnwtWebGraphAnalogIn57643Alarm2Max | read-write | mandatory | Maximum rel.Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.23 | ColumnwtWebGraphAnalogIn57643Alarm2Hysteresis | read-write | mandatory | Hysterese rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.24 | ColumnwtWebGraphAnalogIn57643AlarmSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.25 | ColumnwtWebGraphAnalogIn57643AlarmSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.26 | ColumnwtWebGraphAnalogIn57643AlarmSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.27 | ColumnwtWebGraphAnalogIn57643AlarmSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of … |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.28 | ColumnwtWebGraphAnalogIn57643AlarmFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.29 | ColumnwtWebGraphAnalogIn57643AlarmFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.30 | ColumnwtWebGraphAnalogIn57643AlarmFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.31 | ColumnwtWebGraphAnalogIn57643AlarmFtpClearText | read-write | mandatory | Alarm clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.32 | ColumnwtWebGraphAnalogIn57643AlarmFtpOption | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.33 | ColumnwtWebGraphAnalogIn57643AlarmTimerCron | read-write | mandatory | This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday … |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6 | NodewtWebGraphAnalogIn57643Graphics | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.1 | NodewtWebGraphAnalogIn57643GraphicsBase | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.1.1 | ScalarwtWebGraphAnalogIn57643GraphicsBaseEnable | read-write | mandatory | Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.1.2 | ScalarwtWebGraphAnalogIn57643GraphicsBaseWidth | read-write | mandatory | Defines the width of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.1.3 | ScalarwtWebGraphAnalogIn57643GraphicsBaseHeight | read-write | mandatory | Defines the height of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.1.4 | ScalarwtWebGraphAnalogIn57643GraphicsBaseFrameColor | read-write | mandatory | Frame color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.1.5 | ScalarwtWebGraphAnalogIn57643GraphicsBaseBackgroundColor | read-write | mandatory | Background color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.1.6 | ScalarwtWebGraphAnalogIn57643GraphicsBasePollingrate | read-write | mandatory | Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2 | NodewtWebGraphAnalogIn57643GraphicsSelect | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1 | ScalarwtWebGraphAnalogIn57643GraphicsSelectDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.2 | ScalarwtWebGraphAnalogIn57643GraphicsSelectDisplayShowExtrem | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sens… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3 | TablewtWebGraphAnalogIn57643SensorColor2Table | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1 | RowwtWebGraphAnalogIn57643SensorColor2Entry | not-accessible | mandatory | Numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.1 | ColumnwtWebGraphAnalogIn57643GraphicsSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.2 | ColumnwtWebGraphAnalogIn57643GraphicsSelectScale | read-write | mandatory | Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit … |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3 | NodewtWebGraphAnalogIn57643GraphicsScale | |||
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.1 | ScalarwtWebGraphAnalogIn57643GraphicsScaleAutoScaleEnable | read-write | mandatory | Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 … |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.2 | ScalarwtWebGraphAnalogIn57643GraphicsScaleAutoFitEnable | read-write | mandatory | Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Sca… |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.3 | ScalarwtWebGraphAnalogIn57643GraphicsScale1Min | read-only | mandatory | Scale 1: Minimum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.4 | ScalarwtWebGraphAnalogIn57643GraphicsScale2Min | read-only | mandatory | Scale 2: Minimum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.5 | ScalarwtWebGraphAnalogIn57643GraphicsScale3Min | read-only | mandatory | Scale 3: Minimum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.6 | ScalarwtWebGraphAnalogIn57643GraphicsScale4Min | read-only | mandatory | Scale 4: Minimum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.7 | ScalarwtWebGraphAnalogIn57643GraphicsScale1Max | read-only | mandatory | Scale 1: Maximum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.8 | ScalarwtWebGraphAnalogIn57643GraphicsScale2Max | read-only | mandatory | Scale 2: Maximum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.9 | ScalarwtWebGraphAnalogIn57643GraphicsScale3Max | read-only | mandatory | Scale 3: Maximum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.10 | ScalarwtWebGraphAnalogIn57643GraphicsScale4Max | read-only | mandatory | Scale 4: Maximum. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.11 | ScalarwtWebGraphAnalogIn57643GraphicsScale1Unit | read-only | mandatory | Scale 1: Unit. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.12 | ScalarwtWebGraphAnalogIn57643GraphicsScale2Unit | read-only | mandatory | Scale 2: Unit. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.13 | ScalarwtWebGraphAnalogIn57643GraphicsScale3Unit | read-only | mandatory | Scale 3: Unit. |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.3.14 | ScalarwtWebGraphAnalogIn57643GraphicsScale4Unit | read-only | mandatory | Scale 4: Unit. |
| 1.3.6.1.4.1.5040.1.2.12.3.2 | NodewtWebGraphAnalogIn57643Ports | |||
| 1.3.6.1.4.1.5040.1.2.12.3.2.1 | TablewtWebGraphAnalogIn57643PortTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1 | RowwtWebGraphAnalogIn57643PortEntry | not-accessible | mandatory | Sensor parameters for the individual sensors. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.1 | ColumnwtWebGraphAnalogIn57643PortName | read-write | mandatory | Name of the sensor. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.2 | ColumnwtWebGraphAnalogIn57643PortText | read-write | mandatory | Description of the sensor. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.3 | ColumnwtWebGraphAnalogIn57643PortOffset1 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.4 | ColumnwtWebGraphAnalogIn57643SetPoint1 | read-write | mandatory | Offset calibration: set point 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.5 | ColumnwtWebGraphAnalogIn57643PortOffset2 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.6 | ColumnwtWebGraphAnalogIn57643SetPoint2 | read-write | mandatory | Offset calibration: set point 2 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.7 | ColumnwtWebGraphAnalogIn57643PortComment | read-write | mandatory | Offset calibration: informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.8 | ColumnwtWebGraphAnalogIn57643PortSensorSelect | read-write | mandatory | Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused Binary c… |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.9 | ColumnwtWebGraphAnalogIn57643PortUnit | read-write | mandatory | User scale: displayed unit. |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.10 | ColumnwtWebGraphAnalogIn57643PortScale0 | read-write | mandatory | User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999 |
| 1.3.6.1.4.1.5040.1.2.12.3.2.1.1.11 | ColumnwtWebGraphAnalogIn57643PortScale100 | read-write | mandatory | User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999 |
| 1.3.6.1.4.1.5040.1.2.12.3.3 | NodewtWebGraphAnalogIn57643Manufact | |||
| 1.3.6.1.4.1.5040.1.2.12.3.3.1 | ScalarwtWebGraphAnalogIn57643MfName | read-write | mandatory | Manufacturer company name |
| 1.3.6.1.4.1.5040.1.2.12.3.3.2 | ScalarwtWebGraphAnalogIn57643MfAddr | read-write | mandatory | Manufacturer address. |
| 1.3.6.1.4.1.5040.1.2.12.3.3.3 | ScalarwtWebGraphAnalogIn57643MfHotline | read-write | mandatory | Manufacturer hotline. |
| 1.3.6.1.4.1.5040.1.2.12.3.3.4 | ScalarwtWebGraphAnalogIn57643MfInternet | read-write | mandatory | Manufacturer Internet address. |
| 1.3.6.1.4.1.5040.1.2.12.3.3.5 | ScalarwtWebGraphAnalogIn57643MfDeviceTyp | read-write | mandatory | Manufacturer device name (model number). |
| 1.3.6.1.4.1.5040.1.2.12.3.3.6 | ScalarwtWebGraphAnalogIn57643MfOrderNo | read-write | mandatory | Manufacturer part number. |
| 1.3.6.1.4.1.5040.1.2.12.4 | NodewtWebGraphAnalogIn57643Diag | |||
| 1.3.6.1.4.1.5040.1.2.12.4.1 | ScalarwtWebGraphAnalogIn57643DiagErrorCount | read-only | mandatory | Number of entries in the error memory. |
| 1.3.6.1.4.1.5040.1.2.12.4.2 | ScalarwtWebGraphAnalogIn57643DiagBinaryError | read-only | mandatory | Error causes coded bit-by-bit. |
| 1.3.6.1.4.1.5040.1.2.12.4.3 | ScalarwtWebGraphAnalogIn57643DiagErrorIndex | read-write | mandatory | The value of this variable is used as an index to read an error massege from wtWebGraphAnalogIn57643DiagErrorMessage. Errors are numbered from 1 to wtWebGraphA… |
| 1.3.6.1.4.1.5040.1.2.12.4.4 | ScalarwtWebGraphAnalogIn57643DiagErrorMessage | read-only | mandatory | Using wtWebGraphAnalogIn57643DiagErrorIndex as an index, the appropriate message is available. |
| 1.3.6.1.4.1.5040.1.2.12.4.5 | ScalarwtWebGraphAnalogIn57643DiagErrorClear | write-only | mandatory | Writing 1 into this variable clears all diagnosis messages. |
| 1.3.6.1.4.1.5040.1.2.12.31 | NodewtWebGraphAnalogIn57643Alert1 | This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.32 | NodewtWebGraphAnalogIn57643Alert2 | This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.33 | NodewtWebGraphAnalogIn57643Alert3 | This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.34 | NodewtWebGraphAnalogIn57643Alert4 | This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.35 | NodewtWebGraphAnalogIn57643Alert5 | This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.36 | NodewtWebGraphAnalogIn57643Alert6 | This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.37 | NodewtWebGraphAnalogIn57643Alert7 | This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.38 | NodewtWebGraphAnalogIn57643Alert8 | This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.91 | NodewtWebGraphAnalogIn57643Alert9 | This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.92 | NodewtWebGraphAnalogIn57643Alert10 | This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.93 | NodewtWebGraphAnalogIn57643Alert11 | This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.94 | NodewtWebGraphAnalogIn57643Alert12 | This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.95 | NodewtWebGraphAnalogIn57643Alert13 | This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.96 | NodewtWebGraphAnalogIn57643Alert14 | This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.97 | NodewtWebGraphAnalogIn57643Alert15 | This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.98 | NodewtWebGraphAnalogIn57643Alert16 | This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.12.110 | NodewtWebGraphAnalogIn57643AlertDiag | This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. |