WebGraph-OLD-Air-Quality-US-MIB
240 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5040 | Nodewut | |||
| 1.3.6.1.4.1.5040.1 | NodewtComServer | |||
| 1.3.6.1.4.1.5040.1.2 | NodewtWebio | |||
| 1.3.6.1.4.1.5040.1.2.35 | NodewtWebGraphAirQuality | |||
| 1.3.6.1.4.1.5040.1.2.35.1 | NodewtWebGraphAirQualityTemp | |||
| 1.3.6.1.4.1.5040.1.2.35.1.1 | ScalarwtWebGraphAirQualitySensors | read-only | mandatory | Number of sensors |
| 1.3.6.1.4.1.5040.1.2.35.1.2 | TablewtWebGraphAirQualitySensorTable | not-accessible | mandatory | List of sensors. |
| 1.3.6.1.4.1.5040.1.2.35.1.2.1 | RowwtWebGraphAirQualitySensorEntry | not-accessible | mandatory | List of sensor numbers. |
| 1.3.6.1.4.1.5040.1.2.35.1.2.1.1 | ColumnwtWebGraphAirQualitySensorNo | read-only | mandatory | Sensor number. |
| 1.3.6.1.4.1.5040.1.2.35.1.3 | TablewtWebGraphAirQualityTempValueTable | not-accessible | mandatory | List of measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.35.1.3.1 | RowwtWebGraphAirQualityTempValueEntry | not-accessible | mandatory | Measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.35.1.3.1.1 | ColumnwtWebGraphAirQualityTempValue | read-only | mandatory | Measurement value of the sensor, ASCII, 5 characters in length. |
| 1.3.6.1.4.1.5040.1.2.35.1.4 | TablewtWebGraphAirQualityBinaryTempValueTable | not-accessible | mandatory | List of binary measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.35.1.4.1 | RowwtWebGraphAirQualityBinaryTempValueEntry | not-accessible | mandatory | Binary measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.35.1.4.1.1 | ColumnwtWebGraphAirQualityBinaryTempValue | read-only | mandatory | Binary measurement value of the sensor in 1/10 degrees Celsius, 1/10 per cent or 1/10 ppm, signed number, 0x7FFFFFFF indicates an invalid measured value. |
| 1.3.6.1.4.1.5040.1.2.35.1.8 | TablewtWebGraphAirQualityTempValuePktTable | not-accessible | mandatory | List of measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.35.1.8.1 | RowwtWebGraphAirQualityTempValuePktEntry | not-accessible | mandatory | Measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.35.1.8.1.1 | ColumnwtWebGraphAirQualityTempValuePkt | read-only | mandatory | Measurement value of the sensor, ASCII, 5 characters in length, delimeter is decimal point. |
| 1.3.6.1.4.1.5040.1.2.35.2 | NodewtWebGraphAirQualitySessCntrl | |||
| 1.3.6.1.4.1.5040.1.2.35.2.1 | ScalarwtWebGraphAirQualitySessCntrlPassword | read-write | mandatory | Entering this password opens a session which is ended by writing a 1 to wtWebGraphAirQualitySessCntrlLogout. When read this variable provides a string of lengt… |
| 1.3.6.1.4.1.5040.1.2.35.2.2 | ScalarwtWebGraphAirQualitySessCntrlConfigMode | read-only | mandatory | When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is… |
| 1.3.6.1.4.1.5040.1.2.35.2.3 | ScalarwtWebGraphAirQualitySessCntrlLogout | read-write | mandatory | If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters ar… |
| 1.3.6.1.4.1.5040.1.2.35.2.4 | ScalarwtWebGraphAirQualitySessCntrlAdminPassword | read-write | mandatory | This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid p… |
| 1.3.6.1.4.1.5040.1.2.35.2.5 | ScalarwtWebGraphAirQualitySessCntrlConfigPassword | read-write | mandatory | This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was ass… |
| 1.3.6.1.4.1.5040.1.2.35.3 | NodewtWebGraphAirQualityConfig | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1 | NodewtWebGraphAirQualityDevice | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.1 | NodewtWebGraphAirQualityText | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.1.1 | ScalarwtWebGraphAirQualityDeviceName | read-write | mandatory | Name of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.1.2 | ScalarwtWebGraphAirQualityDeviceText | read-write | mandatory | Description of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.1.3 | ScalarwtWebGraphAirQualityDeviceLocation | read-write | mandatory | Description of the location of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.1.4 | ScalarwtWebGraphAirQualityDeviceContact | read-write | mandatory | Contact address of the system operator of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2 | NodewtWebGraphAirQualityTimeDate | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1 | NodewtWebGraphAirQualityTimeZone | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.1 | ScalarwtWebGraphAirQualityTzOffsetHrs | read-write | mandatory | Offset hours for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.2 | ScalarwtWebGraphAirQualityTzOffsetMin | read-write | mandatory | Offset minutes for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.3 | ScalarwtWebGraphAirQualityTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.4 | ScalarwtWebGraphAirQualityStTzOffsetHrs | read-write | mandatory | Offset hours of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.5 | ScalarwtWebGraphAirQualityStTzOffsetMin | read-write | mandatory | Offset minutes of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.6 | ScalarwtWebGraphAirQualityStTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.7 | ScalarwtWebGraphAirQualityStTzStartMonth | read-write | mandatory | Month in which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.8 | ScalarwtWebGraphAirQualityStTzStartMode | read-write | mandatory | Mode of the day of the week for which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.9 | ScalarwtWebGraphAirQualityStTzStartWday | read-write | mandatory | Day of the week on which the change is made from winter time to summer time |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.10 | ScalarwtWebGraphAirQualityStTzStartHrs | read-write | mandatory | Hour in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.11 | ScalarwtWebGraphAirQualityStTzStartMin | read-write | mandatory | Minute in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.12 | ScalarwtWebGraphAirQualityStTzStopMonth | read-write | mandatory | Month in which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.13 | ScalarwtWebGraphAirQualityStTzStopMode | read-write | mandatory | Mode of the week day on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.14 | ScalarwtWebGraphAirQualityStTzStopWday | read-write | mandatory | Day of the week on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.15 | ScalarwtWebGraphAirQualityStTzStopHrs | read-write | mandatory | Hour at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.1.16 | ScalarwtWebGraphAirQualityStTzStopMin | read-write | mandatory | Minute at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.2 | NodewtWebGraphAirQualityTimeServer | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.2.1 | ScalarwtWebGraphAirQualityTimeServer1 | read-write | mandatory | IP address or name of the 1st time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.2.2 | ScalarwtWebGraphAirQualityTimeServer2 | read-write | mandatory | IP address or name of the 2nd time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.2.3 | ScalarwtWebGraphAirQualityTsEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.2.4 | ScalarwtWebGraphAirQualityTsSyncTime | read-write | mandatory | Daily synchronisation time with the time server (hour: 0-23). |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.3 | NodewtWebGraphAirQualityDeviceClock | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.3.1 | ScalarwtWebGraphAirQualityClockHrs | read-write | mandatory | Clock hours taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.3.2 | ScalarwtWebGraphAirQualityClockMin | read-write | mandatory | Clock minutes taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.3.3 | ScalarwtWebGraphAirQualityClockDay | read-write | mandatory | Date: Day of the month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.3.4 | ScalarwtWebGraphAirQualityClockMonth | read-write | mandatory | Date: Month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.2.3.5 | ScalarwtWebGraphAirQualityClockYear | read-write | mandatory | Date: Year, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3 | NodewtWebGraphAirQualityBasic | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.1 | NodewtWebGraphAirQualityNetwork | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.1.1 | ScalarwtWebGraphAirQualityIpAddress | read-write | mandatory | IP address of the Webio |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.1.2 | ScalarwtWebGraphAirQualitySubnetMask | read-write | mandatory | Subnet mask of the Webio |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.1.3 | ScalarwtWebGraphAirQualityGateway | read-write | mandatory | Gateway of the Webio |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.1.4 | ScalarwtWebGraphAirQualityDnsServer1 | read-write | mandatory | IP address of the 1st DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.1.5 | ScalarwtWebGraphAirQualityDnsServer2 | read-write | mandatory | IP address of the 2nd DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.1.6 | ScalarwtWebGraphAirQualityAddConfig | read-write | mandatory | Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.2 | NodewtWebGraphAirQualityHTTP | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.2.1 | ScalarwtWebGraphAirQualityStartup | read-write | mandatory | Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 3: smart.htm Bit 2: user.htm Bit 1: home.htm Bit 0: index.htm Only one pa… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.2.2 | ScalarwtWebGraphAirQualityGetHeaderEnable | read-write | mandatory | If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Oc… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.2.3 | ScalarwtWebGraphAirQualityHttpPort | read-write | mandatory | Definition of the standard HTML port (Default: 80). |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3 | NodewtWebGraphAirQualityMail | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.1 | ScalarwtWebGraphAirQualityMailAdName | read-write | mandatory | Device name for mail administration. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.2 | ScalarwtWebGraphAirQualityMailReply | read-write | mandatory | Reply address for the mail server. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.3 | ScalarwtWebGraphAirQualityMailServer | read-write | mandatory | Name or IP address of the mail server. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.4 | ScalarwtWebioAn1MailEnable | read-write | mandatory | Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.5 | ScalarwtWebGraphAirQualityMailAuthentication | read-write | mandatory | Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: u… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.6 | ScalarwtWebGraphAirQualityMailAuthUser | read-write | mandatory | Name of the user to be authenticated. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.7 | ScalarwtWebGraphAirQualityMailAuthPassword | read-write | mandatory | Authentication password. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.8 | ScalarwtWebGraphAirQualityMailPop3Server | read-write | mandatory | Name or Ip-address of the POP3 Servers. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.4 | NodewtWebGraphAirQualitySNMP | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.4.1 | ScalarwtWebGraphAirQualitySnmpCommunityStringRead | read-write | mandatory | Community string read only |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.4.2 | ScalarwtWebGraphAirQualitySnmpCommunityStringReadWrite | read-write | mandatory | Community string read / write |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.4.3 | ScalarwtWebGraphAirQualitySystemTrapManagerIP | read-write | mandatory | Name or IP address of the TCP server which accepts the system trap. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.4.4 | ScalarwtWebGraphAirQualitySystemTrapEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.4.5 | ScalarwtWebGraphAirQualitySnmpEnable | read-write | mandatory | Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compare… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.4.6 | ScalarwtWebGraphAirQualitySnmpCommunityStringTrap | read-write | mandatory | Community string send within traps. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.5 | NodewtWebGraphAirQualityUDP | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.5.1 | ScalarwtWebGraphAirQualityUdpPort | read-write | mandatory | Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.5.2 | ScalarwtWebGraphAirQualityUdpEnable | read-write | mandatory | Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.6 | NodewtWebGraphAirQualitySyslog | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.6.1 | ScalarwtWebGraphAirQualitySyslogServerIP | read-write | mandatory | Name or IP address of the Syslog server, which accepts the Syslog messgaes. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.6.2 | ScalarwtWebGraphAirQualitySyslogServerPort | read-write | mandatory | Portnumber of the Syslog servers, default 514. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.6.3 | ScalarwtWebGraphAirQualitySyslogSystemMessagesEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.6.4 | ScalarwtWebGraphAirQualitySyslogEnable | read-write | mandatory | Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7 | NodewtWebGraphAirQualityFTP | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7.1 | ScalarwtWebGraphAirQualityFTPServerIP | read-write | mandatory | Name or IP address of the FTP server, which accepts the FTP messages. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7.2 | ScalarwtWebGraphAirQualityFTPServerControlPort | read-write | mandatory | Portnumber of the control port of the FTP server, default 21. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7.3 | ScalarwtWebGraphAirQualityFTPUserName | read-write | mandatory | FTP Loggin: user name. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7.4 | ScalarwtWebGraphAirQualityFTPPassword | read-write | mandatory | FTP Loggin: user password. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7.5 | ScalarwtWebGraphAirQualityFTPAccount | read-write | mandatory | FTP Loggin: name of account. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7.6 | ScalarwtWebGraphAirQualityFTPOption | read-write | mandatory | Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.7.7 | ScalarwtWebGraphAirQualityFTPEnable | read-write | mandatory | Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8 | NodewtWebGraphAirQualityRSS | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.1 | ScalarwtWebGraphAirQualityRSSChannelTitle | read-write | mandatory | Name of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.2 | ScalarwtWebGraphAirQualityRSSChannelLink | read-write | mandatory | Link of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.3 | ScalarwtWebGraphAirQualityRSSChannelDescription | read-write | mandatory | Description of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.4 | ScalarwtWebGraphAirQualityRSSChannelImage | read-write | mandatory | Link of a picture, which will be shown at the headline of the output window. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.5 | ScalarwtWebGraphAirQualityRSSChannelImageTitle | read-write | mandatory | Alias Name of the picture. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.6 | ScalarwtWebGraphAirQualityRSSChannelImageLink | read-write | mandatory | Link, which can be selected by clicking on the picture. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.7 | ScalarwtWebGraphAirQualityRSSChannelItemTitle | read-write | mandatory | Title of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.8 | ScalarwtWebGraphAirQualityRSSChannelItemLink | read-write | mandatory | Link of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.9 | ScalarwtWebGraphAirQualityRSSChannelItemDescription | read-write | mandatory | Text of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.8.10 | ScalarwtWebGraphAirQualityRSSChannelItemQuantity | read-write | mandatory | Number of lines. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.9 | NodewtWebGraphAirQualityLedLights | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.9.1 | ScalarwtWebGraphAirQualityLedLightsSensorSel | read-write | mandatory | Binary coded trigger conditions, only one sensor may be selected at a time: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Sensor 1 Temperatu… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.9.2 | ScalarwtWebGraphAirQualityLedLightsLimitGreen | read-write | mandatory | Limit to switch on green LED |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.9.3 | ScalarwtWebGraphAirQualityLedLightsLimitYellow | read-write | mandatory | Limit to switch on yellow LED |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.9.4 | ScalarwtWebGraphAirQualityLedLightsLimitRed | read-write | mandatory | Limit to switch on red LED |
| 1.3.6.1.4.1.5040.1.2.35.3.1.4 | NodewtWebGraphAirQualityDatalogger | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.4.1 | ScalarwtWebGraphAirQualityLoggerTimebase | read-write | mandatory | Time base of the data logger |
| 1.3.6.1.4.1.5040.1.2.35.3.1.4.2 | ScalarwtWebGraphAirQualityLoggerSensorSel | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Sensor 1 Temperature Bit 1 : Sensor 2 Humidity Bit 2 : Sensor… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5 | NodewtWebGraphAirQualityAlarm | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.1 | ScalarwtWebGraphAirQualityAlarmCount | read-only | mandatory | Number of independent alarms. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.2 | TablewtWebGraphAirQualityAlarmIfTable | not-accessible | mandatory | List of alarm indices. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.2.1 | RowwtWebGraphAirQualityAlarmIfEntry | not-accessible | mandatory | Numbers of the alarms. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.2.1.1 | ColumnwtWebGraphAirQualityAlarmNo | read-only | mandatory | Alarm number. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3 | TablewtWebGraphAirQualityAlarmTable | not-accessible | mandatory | List of settings depending on the alarm number. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1 | RowwtWebGraphAirQualityAlarmEntry | not-accessible | mandatory | Alarm parameters of the individual alarms. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.1 | ColumnwtWebGraphAirQualityAlarmTrigger | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.2 | ColumnwtWebGraphAirQualityAlarmMin | read-write | mandatory | Minimum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.3 | ColumnwtWebGraphAirQualityAlarmMax | read-write | mandatory | Maximum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.4 | ColumnwtWebGraphAirQualityAlarmHysteresis | read-write | mandatory | Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.5 | ColumnwtWebGraphAirQualityAlarmDelay | read-write | mandatory | Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.6 | ColumnwtWebGraphAirQualityAlarmInterval | read-write | mandatory | Send interval for alarm messages. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.7 | ColumnwtWebGraphAirQualityAlarmEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.8 | ColumnwtWebGraphAirQualityAlarmEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.9 | ColumnwtWebGraphAirQualityAlarmMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.10 | ColumnwtWebGraphAirQualityAlarmMailText | read-write | mandatory | Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.11 | ColumnwtWebGraphAirQualityAlarmManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.12 | ColumnwtWebGraphAirQualityAlarmTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.13 | ColumnwtWebGraphAirQualityAlarmMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.14 | ColumnwtWebGraphAirQualityAlarmTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.15 | ColumnwtWebGraphAirQualityAlarmTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.16 | ColumnwtWebGraphAirQualityAlarmTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.17 | ColumnwtWebGraphAirQualityAlarmClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.18 | ColumnwtWebGraphAirQualityAlarmClearMailText | read-write | mandatory | Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.19 | ColumnwtWebGraphAirQualityAlarmClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.20 | ColumnwtWebGraphAirQualityAlarmClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.21 | ColumnwtWebGraphAirQualityAlarmDeltaTemp | read-write | mandatory | Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.22 | ColumnwtWebGraphAirQualityAlarmRHMin | read-write | mandatory | Minimum rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.23 | ColumnwtWebGraphAirQualityAlarmRHMax | read-write | mandatory | Maximum rel.Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.24 | ColumnwtWebGraphAirQualityAlarmRHHysteresis | read-write | mandatory | Hysteresis of rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.25 | ColumnwtWebGraphAirQualityAlarmAHMin | read-write | mandatory | Minimum abs. Humidity in g/(m*m*m) with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.26 | ColumnwtWebGraphAirQualityAlarmAHMax | read-write | mandatory | Maximum abs. Humidity in g/(m*m*m) with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.27 | ColumnwtWebGraphAirQualityAlarmSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.28 | ColumnwtWebGraphAirQualityAlarmSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.29 | ColumnwtWebGraphAirQualityAlarmSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.30 | ColumnwtWebGraphAirQualityAlarmSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.31 | ColumnwtWebGraphAirQualityAlarmFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.32 | ColumnwtWebGraphAirQualityAlarmFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.33 | ColumnwtWebGraphAirQualityAlarmFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.34 | ColumnwtWebGraphAirQualityAlarmFtpClearText | read-write | mandatory | Alarm clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.35 | ColumnwtWebGraphAirQualityAlarmFtpOption | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.36 | ColumnwtWebGraphAirQualityAlarmTimerCron | read-write | mandatory | This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday … |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.37 | ColumnwtWebGraphAirQualityAlarmVocMax | read-write | mandatory | Maximum VOC in ppm with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.38 | ColumnwtWebGraphAirQualityAlarmVocHysteresis | read-write | mandatory | Hysteresis of VOC in ppm with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.39 | ColumnwtWebGraphAirQualityAlarmName | read-write | mandatory | Alert name |
| 1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.40 | ColumnwtWebGraphAirQualityAlarmActive | read-write | mandatory | Alert active 1 = ON 0 = OFF |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6 | NodewtWebGraphAirQualityGraphics | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.1 | NodewtWebGraphAirQualityGraphicsBase | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.1.1 | ScalarwtWebGraphAirQualityGraphicsBaseEnable | read-write | mandatory | Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.1.2 | ScalarwtWebGraphAirQualityGraphicsBaseWidth | read-write | mandatory | Defines the width of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.1.3 | ScalarwtWebGraphAirQualityGraphicsBaseHeight | read-write | mandatory | Defines the height of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.1.4 | ScalarwtWebGraphAirQualityGraphicsBaseFrameColor | read-write | mandatory | Frame color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.1.5 | ScalarwtWebGraphAirQualityGraphicsBaseBackgroundColor | read-write | mandatory | Background color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.1.6 | ScalarwtWebGraphAirQualityGraphicsBasePollingrate | read-write | mandatory | Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.2 | NodewtWebGraphAirQualityGraphicsSelect | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.2.1 | ScalarwtWebGraphAirQualityGraphicsSelectDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.2.2 | ScalarwtWebGraphAirQualityGraphicsSelectDisplayShowExtrem | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sens… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3 | TablewtWebGraphAirQualitySensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1 | RowwtWebGraphAirQualitySensorColorEntry | not-accessible | mandatory | Numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1.1 | ColumnwtWebGraphAirQualityGraphicsSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1.2 | ColumnwtWebGraphAirQualityGraphicsSelectScale | read-write | mandatory | Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit … |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3 | NodewtWebGraphAirQualityGraphicsScale | |||
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.1 | ScalarwtWebGraphAirQualityGraphicsScaleAutoScaleEnable | read-write | mandatory | Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 … |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.2 | ScalarwtWebGraphAirQualityGraphicsScaleAutoFitEnable | read-write | mandatory | Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Sca… |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.3 | ScalarwtWebGraphAirQualityGraphicsScale1Min | read-only | mandatory | Scale 1: Minimum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.4 | ScalarwtWebGraphAirQualityGraphicsScale2Min | read-only | mandatory | Scale 2: Minimum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.5 | ScalarwtWebGraphAirQualityGraphicsScale3Min | read-only | mandatory | Scale 3: Minimum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.6 | ScalarwtWebGraphAirQualityGraphicsScale4Min | read-only | mandatory | Scale 4: Minimum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.7 | ScalarwtWebGraphAirQualityGraphicsScale1Max | read-only | mandatory | Scale 1: Maximum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.8 | ScalarwtWebGraphAirQualityGraphicsScale2Max | read-only | mandatory | Scale 2: Maximum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.9 | ScalarwtWebGraphAirQualityGraphicsScale3Max | read-only | mandatory | Scale 3: Maximum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.10 | ScalarwtWebGraphAirQualityGraphicsScale4Max | read-only | mandatory | Scale 4: Maximum. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.11 | ScalarwtWebGraphAirQualityGraphicsScale1Unit | read-only | mandatory | Scale 1: Unit. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.12 | ScalarwtWebGraphAirQualityGraphicsScale2Unit | read-only | mandatory | Scale 2: Unit. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.13 | ScalarwtWebGraphAirQualityGraphicsScale3Unit | read-only | mandatory | Scale 3: Unit. |
| 1.3.6.1.4.1.5040.1.2.35.3.1.6.3.14 | ScalarwtWebGraphAirQualityGraphicsScale4Unit | read-only | mandatory | Scale 4: Unit. |
| 1.3.6.1.4.1.5040.1.2.35.3.2 | NodewtWebGraphAirQualityPorts | |||
| 1.3.6.1.4.1.5040.1.2.35.3.2.1 | TablewtWebGraphAirQualityPortTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1 | RowwtWebGraphAirQualityPortEntry | not-accessible | mandatory | Sensor parameters for the individual sensors. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1.1 | ColumnwtWebGraphAirQualityPortName | read-write | mandatory | Name of the sensor. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1.2 | ColumnwtWebGraphAirQualityPortText | read-write | mandatory | Description of the sensor. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1.3 | ColumnwtWebGraphAirQualityPortOffset1 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1.4 | ColumnwtWebGraphAirQualityPortTemperature1 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1.5 | ColumnwtWebGraphAirQualityPortOffset2 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1.6 | ColumnwtWebGraphAirQualityPortTemperature2 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.35.3.2.1.1.7 | ColumnwtWebGraphAirQualityPortComment | read-write | mandatory | Offset calibration: informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.35.3.3 | NodewtWebGraphAirQualityManufact | |||
| 1.3.6.1.4.1.5040.1.2.35.3.3.1 | ScalarwtWebGraphAirQualityMfName | read-write | mandatory | Manufacturer company name |
| 1.3.6.1.4.1.5040.1.2.35.3.3.2 | ScalarwtWebGraphAirQualityMfAddr | read-write | mandatory | Manufacturer address. |
| 1.3.6.1.4.1.5040.1.2.35.3.3.3 | ScalarwtWebGraphAirQualityMfHotline | read-write | mandatory | Manufacturer hotline. |
| 1.3.6.1.4.1.5040.1.2.35.3.3.4 | ScalarwtWebGraphAirQualityMfInternet | read-write | mandatory | Manufacturer Internet address. |
| 1.3.6.1.4.1.5040.1.2.35.3.3.5 | ScalarwtWebGraphAirQualityMfDeviceTyp | read-write | mandatory | Manufacturer device name (model number). |
| 1.3.6.1.4.1.5040.1.2.35.3.3.6 | ScalarwtWebGraphAirQualityMfOrderNo | read-write | mandatory | Manufacturer part number. |
| 1.3.6.1.4.1.5040.1.2.35.4 | NodewtWebGraphAirQualityDiag | |||
| 1.3.6.1.4.1.5040.1.2.35.4.1 | ScalarwtWebGraphAirQualityDiagErrorCount | read-only | mandatory | Number of entries in the error memory. |
| 1.3.6.1.4.1.5040.1.2.35.4.2 | ScalarwtWebGraphAirQualityDiagBinaryError | read-only | mandatory | Error causes coded bit-by-bit. |
| 1.3.6.1.4.1.5040.1.2.35.4.3 | ScalarwtWebGraphAirQualityDiagErrorIndex | read-write | mandatory | The value of this variable is used as an index to read an error massege from wtWebGraphAirQualityDiagErrorMessage. Errors are numbered from 1 to wtWebGraphAirQ… |
| 1.3.6.1.4.1.5040.1.2.35.4.4 | ScalarwtWebGraphAirQualityDiagErrorMessage | read-only | mandatory | Using wtWebGraphAirQualityDiagErrorIndex as an index, the appropriate message is available. |
| 1.3.6.1.4.1.5040.1.2.35.4.5 | ScalarwtWebGraphAirQualityDiagErrorClear | write-only | mandatory | Writing 1 into this variable clears all diagnosis messages. |
| 1.3.6.1.4.1.5040.1.2.35.31 | NodewtWebGraphAirQualityAlert1 | This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.32 | NodewtWebGraphAirQualityAlert2 | This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.33 | NodewtWebGraphAirQualityAlert3 | This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.34 | NodewtWebGraphAirQualityAlert4 | This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.35 | NodewtWebGraphAirQualityAlert5 | This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.36 | NodewtWebGraphAirQualityAlert6 | This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.37 | NodewtWebGraphAirQualityAlert7 | This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.38 | NodewtWebGraphAirQualityAlert8 | This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.91 | NodewtWebGraphAirQualityAlert9 | This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.92 | NodewtWebGraphAirQualityAlert10 | This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.93 | NodewtWebGraphAirQualityAlert11 | This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.94 | NodewtWebGraphAirQualityAlert12 | This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.95 | NodewtWebGraphAirQualityAlert13 | This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.96 | NodewtWebGraphAirQualityAlert14 | This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.97 | NodewtWebGraphAirQualityAlert15 | This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.98 | NodewtWebGraphAirQualityAlert16 | This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.35.110 | NodewtWebGraphAirQualityAlertDiag | This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. |