WebGraph-OLD-Thermo-Hygro-Barometer-US-MIB
232 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5040 | Nodewut | |||
| 1.3.6.1.4.1.5040.1 | NodewtComServer | |||
| 1.3.6.1.4.1.5040.1.2 | NodewtWebio | |||
| 1.3.6.1.4.1.5040.1.2.16 | NodewtWebGraphThermoBaro | |||
| 1.3.6.1.4.1.5040.1.2.16.1 | NodewtWebGraphThermoBaroTemp | |||
| 1.3.6.1.4.1.5040.1.2.16.1.1 | ScalarwtWebGraphThermoBaroSensors | read-only | mandatory | Number of sensors |
| 1.3.6.1.4.1.5040.1.2.16.1.2 | TablewtWebGraphThermoBaroSensorTable | not-accessible | mandatory | List of sensors. |
| 1.3.6.1.4.1.5040.1.2.16.1.2.1 | RowwtWebGraphThermoBaroSensorEntry | not-accessible | mandatory | List of sensor numbers. |
| 1.3.6.1.4.1.5040.1.2.16.1.2.1.1 | ColumnwtWebGraphThermoBaroSensorNo | read-only | mandatory | Sensor number. |
| 1.3.6.1.4.1.5040.1.2.16.1.3 | TablewtWebGraphThermoBaroTempValueTable | not-accessible | mandatory | List of measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.16.1.3.1 | RowwtWebGraphThermoBaroTempValueEntry | not-accessible | mandatory | Measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.16.1.3.1.1 | ColumnwtWebGraphThermoBaroTempValue | read-only | mandatory | Measurement value of the sensor, ASCII, 5 characters in length. |
| 1.3.6.1.4.1.5040.1.2.16.1.4 | TablewtWebGraphThermoBaroBinaryTempValueTable | not-accessible | mandatory | List of binary measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.16.1.4.1 | RowwtWebGraphThermoBaroBinaryTempValueEntry | not-accessible | mandatory | Binary measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.16.1.4.1.1 | ColumnwtWebGraphThermoBaroBinaryTempValue | read-only | mandatory | Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value. |
| 1.3.6.1.4.1.5040.1.2.16.1.8 | TablewtWebGraphThermoBaroTempValuePktTable | not-accessible | mandatory | List of measurement values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.16.1.8.1 | RowwtWebGraphThermoBaroTempValuePktEntry | not-accessible | mandatory | Measurement values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.16.1.8.1.1 | ColumnwtWebGraphThermoBaroTempValuePkt | read-only | mandatory | Measurement value of the sensor, ASCII, 5 characters in length, delimeter is decimal point. |
| 1.3.6.1.4.1.5040.1.2.16.2 | NodewtWebGraphThermoBaroSessCntrl | |||
| 1.3.6.1.4.1.5040.1.2.16.2.1 | ScalarwtWebGraphThermoBaroSessCntrlPassword | read-write | mandatory | Entering this password opens a session which is ended by writing a 1 to wtWebGraphThermoBaroSessCntrlLogout. When read this variable provides a string of lengt… |
| 1.3.6.1.4.1.5040.1.2.16.2.2 | ScalarwtWebGraphThermoBaroSessCntrlConfigMode | read-only | mandatory | When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is… |
| 1.3.6.1.4.1.5040.1.2.16.2.3 | ScalarwtWebGraphThermoBaroSessCntrlLogout | read-write | mandatory | If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters ar… |
| 1.3.6.1.4.1.5040.1.2.16.2.4 | ScalarwtWebGraphThermoBaroSessCntrlAdminPassword | read-write | mandatory | This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid p… |
| 1.3.6.1.4.1.5040.1.2.16.2.5 | ScalarwtWebGraphThermoBaroSessCntrlConfigPassword | read-write | mandatory | This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was ass… |
| 1.3.6.1.4.1.5040.1.2.16.3 | NodewtWebGraphThermoBaroConfig | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1 | NodewtWebGraphThermoBaroDevice | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.1 | NodewtWebGraphThermoBaroText | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.1.1 | ScalarwtWebGraphThermoBaroDeviceName | read-write | mandatory | Name of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.1.2 | ScalarwtWebGraphThermoBaroDeviceText | read-write | mandatory | Description of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.1.3 | ScalarwtWebGraphThermoBaroDeviceLocation | read-write | mandatory | Description of the location of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.1.4 | ScalarwtWebGraphThermoBaroDeviceContact | read-write | mandatory | Contact address of the system operator of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2 | NodewtWebGraphThermoBaroTimeDate | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1 | NodewtWebGraphThermoBaroTimeZone | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.1 | ScalarwtWebGraphThermoBaroTzOffsetHrs | read-write | mandatory | Offset hours for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.2 | ScalarwtWebGraphThermoBaroTzOffsetMin | read-write | mandatory | Offset minutes for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.3 | ScalarwtWebGraphThermoBaroTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.4 | ScalarwtWebGraphThermoBaroStTzOffsetHrs | read-write | mandatory | Offset hours of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.5 | ScalarwtWebGraphThermoBaroStTzOffsetMin | read-write | mandatory | Offset minutes of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.6 | ScalarwtWebGraphThermoBaroStTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.7 | ScalarwtWebGraphThermoBaroStTzStartMonth | read-write | mandatory | Month in which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.8 | ScalarwtWebGraphThermoBaroStTzStartMode | read-write | mandatory | Mode of the day of the week for which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.9 | ScalarwtWebGraphThermoBaroStTzStartWday | read-write | mandatory | Day of the week on which the change is made from winter time to summer time |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.10 | ScalarwtWebGraphThermoBaroStTzStartHrs | read-write | mandatory | Hour in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.11 | ScalarwtWebGraphThermoBaroStTzStartMin | read-write | mandatory | Minute in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.12 | ScalarwtWebGraphThermoBaroStTzStopMonth | read-write | mandatory | Month in which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.13 | ScalarwtWebGraphThermoBaroStTzStopMode | read-write | mandatory | Mode of the week day on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.14 | ScalarwtWebGraphThermoBaroStTzStopWday | read-write | mandatory | Day of the week on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.15 | ScalarwtWebGraphThermoBaroStTzStopHrs | read-write | mandatory | Hour at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.1.16 | ScalarwtWebGraphThermoBaroStTzStopMin | read-write | mandatory | Minute at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.2 | NodewtWebGraphThermoBaroTimeServer | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.2.1 | ScalarwtWebGraphThermoBaroTimeServer1 | read-write | mandatory | IP address or name of the 1st time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.2.2 | ScalarwtWebGraphThermoBaroTimeServer2 | read-write | mandatory | IP address or name of the 2nd time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.2.3 | ScalarwtWebGraphThermoBaroTsEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.2.4 | ScalarwtWebGraphThermoBaroTsSyncTime | read-write | mandatory | Daily synchronisation time with the time server (hour: 0-23). |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.3 | NodewtWebGraphThermoBaroDeviceClock | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.3.1 | ScalarwtWebGraphThermoBaroClockHrs | read-write | mandatory | Clock hours taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.3.2 | ScalarwtWebGraphThermoBaroClockMin | read-write | mandatory | Clock minutes taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.3.3 | ScalarwtWebGraphThermoBaroClockDay | read-write | mandatory | Date: Day of the month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.3.4 | ScalarwtWebGraphThermoBaroClockMonth | read-write | mandatory | Date: Month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.2.3.5 | ScalarwtWebGraphThermoBaroClockYear | read-write | mandatory | Date: Year, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3 | NodewtWebGraphThermoBaroBasic | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.1 | NodewtWebGraphThermoBaroNetwork | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.1.1 | ScalarwtWebGraphThermoBaroIpAddress | read-write | mandatory | IP address of the Webio |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.1.2 | ScalarwtWebGraphThermoBaroSubnetMask | read-write | mandatory | Subnet mask of the Webio |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.1.3 | ScalarwtWebGraphThermoBaroGateway | read-write | mandatory | Gateway of the Webio |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.1.4 | ScalarwtWebGraphThermoBaroDnsServer1 | read-write | mandatory | IP address of the 1st DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.1.5 | ScalarwtWebGraphThermoBaroDnsServer2 | read-write | mandatory | IP address of the 2nd DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.1.6 | ScalarwtWebGraphThermoBaroAddConfig | read-write | mandatory | Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.2 | NodewtWebGraphThermoBaroHTTP | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.2.1 | ScalarwtWebGraphThermoBaroStartup | read-write | mandatory | Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selecte… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.2.2 | ScalarwtWebGraphThermoBaroGetHeaderEnable | read-write | mandatory | If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Oc… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.2.3 | ScalarwtWebGraphThermoBaroHttpPort | read-write | mandatory | Definition of the standard HTML port (Default: 80). |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3 | NodewtWebGraphThermoBaroMail | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.1 | ScalarwtWebGraphThermoBaroMailAdName | read-write | mandatory | Device name for mail administration. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.2 | ScalarwtWebGraphThermoBaroMailReply | read-write | mandatory | Reply address for the mail server. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.3 | ScalarwtWebGraphThermoBaroMailServer | read-write | mandatory | Name or IP address of the mail server. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.4 | ScalarwtWebioAn1MailEnable | read-write | mandatory | Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.5 | ScalarwtWebGraphThermoBaroMailAuthentication | read-write | mandatory | Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: u… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.6 | ScalarwtWebGraphThermoBaroMailAuthUser | read-write | mandatory | Name of the user to be authenticated. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.7 | ScalarwtWebGraphThermoBaroMailAuthPassword | read-write | mandatory | Authentication password. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.3.8 | ScalarwtWebGraphThermoBaroMailPop3Server | read-write | mandatory | Name or Ip-address of the POP3 Servers. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.4 | NodewtWebGraphThermoBaroSNMP | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.4.1 | ScalarwtWebGraphThermoBaroSnmpCommunityStringRead | read-write | mandatory | Community string read only |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.4.2 | ScalarwtWebGraphThermoBaroSnmpCommunityStringReadWrite | read-write | mandatory | Community string read / write |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.4.3 | ScalarwtWebGraphThermoBaroSystemTrapManagerIP | read-write | mandatory | Name or IP address of the TCP server which accepts the system trap. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.4.4 | ScalarwtWebGraphThermoBaroSystemTrapEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.4.5 | ScalarwtWebGraphThermoBaroSnmpEnable | read-write | mandatory | Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compare… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.4.6 | ScalarwtWebGraphThermoBaroSnmpCommunityStringTrap | read-write | mandatory | Community string send within traps. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.5 | NodewtWebGraphThermoBaroUDP | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.5.1 | ScalarwtWebGraphThermoBaroUdpPort | read-write | mandatory | Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.5.2 | ScalarwtWebGraphThermoBaroUdpEnable | read-write | mandatory | Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.6 | NodewtWebGraphThermoBaroSyslog | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.6.1 | ScalarwtWebGraphThermoBaroSyslogServerIP | read-write | mandatory | Name or IP address of the Syslog server, which accepts the Syslog messgaes. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.6.2 | ScalarwtWebGraphThermoBaroSyslogServerPort | read-write | mandatory | Portnumber of the Syslog servers, default 514. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.6.3 | ScalarwtWebGraphThermoBaroSyslogSystemMessagesEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.6.4 | ScalarwtWebGraphThermoBaroSyslogEnable | read-write | mandatory | Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7 | NodewtWebGraphThermoBaroFTP | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7.1 | ScalarwtWebGraphThermoBaroFTPServerIP | read-write | mandatory | Name or IP address of the FTP server, which accepts the FTP messages. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7.2 | ScalarwtWebGraphThermoBaroFTPServerControlPort | read-write | mandatory | Portnumber of the control port of the FTP server, default 21. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7.3 | ScalarwtWebGraphThermoBaroFTPUserName | read-write | mandatory | FTP Loggin: user name. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7.4 | ScalarwtWebGraphThermoBaroFTPPassword | read-write | mandatory | FTP Loggin: user password. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7.5 | ScalarwtWebGraphThermoBaroFTPAccount | read-write | mandatory | FTP Loggin: name of account. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7.6 | ScalarwtWebGraphThermoBaroFTPOption | read-write | mandatory | Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.7.7 | ScalarwtWebGraphThermoBaroFTPEnable | read-write | mandatory | Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8 | NodewtWebGraphThermoBaroRSS | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.1 | ScalarwtWebGraphThermoBaroRSSChannelTitle | read-write | mandatory | Name of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.2 | ScalarwtWebGraphThermoBaroRSSChannelLink | read-write | mandatory | Link of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.3 | ScalarwtWebGraphThermoBaroRSSChannelDescription | read-write | mandatory | Description of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.4 | ScalarwtWebGraphThermoBaroRSSChannelImage | read-write | mandatory | Link of a picture, which will be shown at the headline of the output window. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.5 | ScalarwtWebGraphThermoBaroRSSChannelImageTitle | read-write | mandatory | Alias Name of the picture. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.6 | ScalarwtWebGraphThermoBaroRSSChannelImageLink | read-write | mandatory | Link, which can be selected by clicking on the picture. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.7 | ScalarwtWebGraphThermoBaroRSSChannelItemTitle | read-write | mandatory | Title of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.8 | ScalarwtWebGraphThermoBaroRSSChannelItemLink | read-write | mandatory | Link of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.9 | ScalarwtWebGraphThermoBaroRSSChannelItemDescription | read-write | mandatory | Text of the RSS Feed. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.3.8.10 | ScalarwtWebGraphThermoBaroRSSChannelItemQuantity | read-write | mandatory | Number of lines. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.4 | NodewtWebGraphThermoBaroDatalogger | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.4.1 | ScalarwtWebGraphThermoBaroLoggerTimebase | read-write | mandatory | Time base of the data logger |
| 1.3.6.1.4.1.5040.1.2.16.3.1.4.2 | ScalarwtWebGraphThermoBaroLoggerSensorSel | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5 | NodewtWebGraphThermoBaroAlarm | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.1 | ScalarwtWebGraphThermoBaroAlarmCount | read-only | mandatory | Number of independent alarms. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.2 | TablewtWebGraphThermoBaroAlarmIfTable | not-accessible | mandatory | List of alarm indices. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.2.1 | RowwtWebGraphThermoBaroAlarmIfEntry | not-accessible | mandatory | Numbers of the alarms. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.2.1.1 | ColumnwtWebGraphThermoBaroAlarmNo | read-only | mandatory | Alarm number. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3 | TablewtWebGraphThermoBaroAlarmTable | not-accessible | mandatory | List of settings depending on the alarm number. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1 | RowwtWebGraphThermoBaroAlarmEntry | not-accessible | mandatory | Alarm parameters of the individual alarms. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.1 | ColumnwtWebGraphThermoBaroAlarmTrigger | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.2 | ColumnwtWebGraphThermoBaroAlarmMin | read-write | mandatory | Minimum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.3 | ColumnwtWebGraphThermoBaroAlarmMax | read-write | mandatory | Maximum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.4 | ColumnwtWebGraphThermoBaroAlarmHysteresis | read-write | mandatory | Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.5 | ColumnwtWebGraphThermoBaroAlarmDelay | read-write | mandatory | Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.6 | ColumnwtWebGraphThermoBaroAlarmInterval | read-write | mandatory | Send interval for alarm messages. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.7 | ColumnwtWebGraphThermoBaroAlarmEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.8 | ColumnwtWebGraphThermoBaroAlarmEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.9 | ColumnwtWebGraphThermoBaroAlarmMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.10 | ColumnwtWebGraphThermoBaroAlarmMailText | read-write | mandatory | Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.11 | ColumnwtWebGraphThermoBaroAlarmManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.12 | ColumnwtWebGraphThermoBaroAlarmTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.13 | ColumnwtWebGraphThermoBaroAlarmMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.14 | ColumnwtWebGraphThermoBaroAlarmTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.15 | ColumnwtWebGraphThermoBaroAlarmTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.16 | ColumnwtWebGraphThermoBaroAlarmTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.17 | ColumnwtWebGraphThermoBaroAlarmClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.18 | ColumnwtWebGraphThermoBaroAlarmClearMailText | read-write | mandatory | Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.19 | ColumnwtWebGraphThermoBaroAlarmClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.20 | ColumnwtWebGraphThermoBaroAlarmClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.21 | ColumnwtWebGraphThermoBaroAlarmDeltaTemp | read-write | mandatory | Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.22 | ColumnwtWebGraphThermoBaroAlarmRHMin | read-write | mandatory | Minimum rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.23 | ColumnwtWebGraphThermoBaroAlarmRHMax | read-write | mandatory | Maximum rel.Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.24 | ColumnwtWebGraphThermoBaroAlarmRHHysteresis | read-write | mandatory | Hysterese rel. Humidity in percent with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.25 | ColumnwtWebGraphThermoBaroAlarmAHMin | read-write | mandatory | Minimum abs. Humidity in g/(m*m*m) with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.26 | ColumnwtWebGraphThermoBaroAlarmAHMax | read-write | mandatory | Maximum abs. Humidity in g/(m*m*m) with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.27 | ColumnwtWebGraphThermoBaroAlarmSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.28 | ColumnwtWebGraphThermoBaroAlarmSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.29 | ColumnwtWebGraphThermoBaroAlarmSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.30 | ColumnwtWebGraphThermoBaroAlarmSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.31 | ColumnwtWebGraphThermoBaroAlarmFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.32 | ColumnwtWebGraphThermoBaroAlarmFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.33 | ColumnwtWebGraphThermoBaroAlarmFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.34 | ColumnwtWebGraphThermoBaroAlarmFtpClearText | read-write | mandatory | Alarm clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.35 | ColumnwtWebGraphThermoBaroAlarmFtpOptions | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.5.3.1.36 | ColumnwtWebGraphThermoBaroAlarmTimerCron | read-write | mandatory | This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday … |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6 | NodewtWebGraphThermoBaroGraphics | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.1 | NodewtWebGraphThermoBaroGraphicsBase | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.1.1 | ScalarwtWebGraphThermoBaroGraphicsBaseEnable | read-write | mandatory | Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.1.2 | ScalarwtWebGraphThermoBaroGraphicsBaseWidth | read-write | mandatory | Defines the width of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.1.3 | ScalarwtWebGraphThermoBaroGraphicsBaseHeight | read-write | mandatory | Defines the height of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.1.4 | ScalarwtWebGraphThermoBaroGraphicsBaseFrameColor | read-write | mandatory | Frame color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.1.5 | ScalarwtWebGraphThermoBaroGraphicsBaseBackgroundColor | read-write | mandatory | Background color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.1.6 | ScalarwtWebGraphThermoBaroGraphicsBasePollingrate | read-write | mandatory | Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.2 | NodewtWebGraphThermoBaroGraphicsSelect | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.2.1 | ScalarwtWebGraphThermoBaroGraphicsSelectDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.2.2 | ScalarwtWebGraphThermoBaroGraphicsSelectDisplayShowExtrem | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sens… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.2.3 | TablewtWebGraphThermoBaroSensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.2.3.1 | RowwtWebGraphThermoBaroSensorColorEntry | not-accessible | mandatory | Numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.2.3.1.1 | ColumnwtWebGraphThermoBaroGraphicsSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.2.3.1.2 | ColumnwtWebGraphThermoBaroGraphicsSelectScale | read-write | mandatory | Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit … |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3 | NodewtWebGraphThermoBaroGraphicsScale | |||
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.1 | ScalarwtWebGraphThermoBaroGraphicsScaleAutoScaleEnable | read-write | mandatory | Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 … |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.2 | ScalarwtWebGraphThermoBaroGraphicsScaleAutoFitEnable | read-write | mandatory | Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Sca… |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.3 | ScalarwtWebGraphThermoBaroGraphicsScale1Min | read-only | mandatory | Scale 1: Minimum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.4 | ScalarwtWebGraphThermoBaroGraphicsScale2Min | read-only | mandatory | Scale 2: Minimum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.5 | ScalarwtWebGraphThermoBaroGraphicsScale3Min | read-only | mandatory | Scale 3: Minimum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.6 | ScalarwtWebGraphThermoBaroGraphicsScale4Min | read-only | mandatory | Scale 4: Minimum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.7 | ScalarwtWebGraphThermoBaroGraphicsScale1Max | read-only | mandatory | Scale 1: Maximum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.8 | ScalarwtWebGraphThermoBaroGraphicsScale2Max | read-only | mandatory | Scale 2: Maximum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.9 | ScalarwtWebGraphThermoBaroGraphicsScale3Max | read-only | mandatory | Scale 3: Maximum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.10 | ScalarwtWebGraphThermoBaroGraphicsScale4Max | read-only | mandatory | Scale 4: Maximum. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.11 | ScalarwtWebGraphThermoBaroGraphicsScale1Unit | read-only | mandatory | Scale 1: Unit. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.12 | ScalarwtWebGraphThermoBaroGraphicsScale2Unit | read-only | mandatory | Scale 2: Unit. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.13 | ScalarwtWebGraphThermoBaroGraphicsScale3Unit | read-only | mandatory | Scale 3: Unit. |
| 1.3.6.1.4.1.5040.1.2.16.3.1.6.3.14 | ScalarwtWebGraphThermoBaroGraphicsScale4Unit | read-only | mandatory | Scale 4: Unit. |
| 1.3.6.1.4.1.5040.1.2.16.3.2 | NodewtWebGraphThermoBaroPorts | |||
| 1.3.6.1.4.1.5040.1.2.16.3.2.1 | TablewtWebGraphThermoBaroPortTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1 | RowwtWebGraphThermoBaroPortEntry | not-accessible | mandatory | Sensor parameters for the individual sensors. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1.1 | ColumnwtWebGraphThermoBaroPortName | read-write | mandatory | Name of the sensor. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1.2 | ColumnwtWebGraphThermoBaroPortText | read-write | mandatory | Description of the sensor. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1.3 | ColumnwtWebGraphThermoBaroPortOffset1 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1.4 | ColumnwtWebGraphThermoBaroPortTemperature1 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1.5 | ColumnwtWebGraphThermoBaroPortOffset2 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1.6 | ColumnwtWebGraphThermoBaroPortTemperature2 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.1.1.7 | ColumnwtWebGraphThermoBaroPortComment | read-write | mandatory | Offset calibration: informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.16.3.2.2 | ScalarwtWebGraphThermoBaroPortAltidude | read-write | mandatory | Altidude oh the Sensor over mean sea level (MSL). |
| 1.3.6.1.4.1.5040.1.2.16.3.3 | NodewtWebGraphThermoBaroManufact | |||
| 1.3.6.1.4.1.5040.1.2.16.3.3.1 | ScalarwtWebGraphThermoBaroMfName | read-write | mandatory | Manufacturer company name |
| 1.3.6.1.4.1.5040.1.2.16.3.3.2 | ScalarwtWebGraphThermoBaroMfAddr | read-write | mandatory | Manufacturer address. |
| 1.3.6.1.4.1.5040.1.2.16.3.3.3 | ScalarwtWebGraphThermoBaroMfHotline | read-write | mandatory | Manufacturer hotline. |
| 1.3.6.1.4.1.5040.1.2.16.3.3.4 | ScalarwtWebGraphThermoBaroMfInternet | read-write | mandatory | Manufacturer Internet address. |
| 1.3.6.1.4.1.5040.1.2.16.3.3.5 | ScalarwtWebGraphThermoBaroMfDeviceTyp | read-write | mandatory | Manufacturer device name (model number). |
| 1.3.6.1.4.1.5040.1.2.16.3.3.6 | ScalarwtWebGraphThermoBaroMfOrderNo | read-write | mandatory | Manufacturer part number. |
| 1.3.6.1.4.1.5040.1.2.16.4 | NodewtWebGraphThermoBaroDiag | |||
| 1.3.6.1.4.1.5040.1.2.16.4.1 | ScalarwtWebGraphThermoBaroDiagErrorCount | read-only | mandatory | Number of entries in the error memory. |
| 1.3.6.1.4.1.5040.1.2.16.4.2 | ScalarwtWebGraphThermoBaroDiagBinaryError | read-only | mandatory | Error causes coded bit-by-bit. |
| 1.3.6.1.4.1.5040.1.2.16.4.3 | ScalarwtWebGraphThermoBaroDiagErrorIndex | read-write | mandatory | The value of this variable is used as an index to read an error massege from wtWebGraphThermoBaroDiagErrorMessage. Errors are numbered from 1 to wtWebGraphTher… |
| 1.3.6.1.4.1.5040.1.2.16.4.4 | ScalarwtWebGraphThermoBaroDiagErrorMessage | read-only | mandatory | Using wtWebGraphThermoBaroDiagErrorIndex as an index, the appropriate message is available. |
| 1.3.6.1.4.1.5040.1.2.16.4.5 | ScalarwtWebGraphThermoBaroDiagErrorClear | write-only | mandatory | Writing 1 into this variable clears all diagnosis messages. |
| 1.3.6.1.4.1.5040.1.2.16.31 | NodewtWebGraphThermoBaroAlert1 | This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.32 | NodewtWebGraphThermoBaroAlert2 | This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.33 | NodewtWebGraphThermoBaroAlert3 | This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.34 | NodewtWebGraphThermoBaroAlert4 | This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.35 | NodewtWebGraphThermoBaroAlert5 | This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.36 | NodewtWebGraphThermoBaroAlert6 | This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.37 | NodewtWebGraphThermoBaroAlert7 | This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.38 | NodewtWebGraphThermoBaroAlert8 | This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.91 | NodewtWebGraphThermoBaroAlert9 | This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.92 | NodewtWebGraphThermoBaroAlert10 | This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.93 | NodewtWebGraphThermoBaroAlert11 | This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.94 | NodewtWebGraphThermoBaroAlert12 | This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.95 | NodewtWebGraphThermoBaroAlert13 | This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.96 | NodewtWebGraphThermoBaroAlert14 | This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.97 | NodewtWebGraphThermoBaroAlert15 | This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.98 | NodewtWebGraphThermoBaroAlert16 | This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.16.110 | NodewtWebGraphThermoBaroAlertDiag | This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. |