WebGraph-OLD-Thermometer-PT-US-MIB
500 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5040 | Nodewut | |||
| 1.3.6.1.4.1.5040.1 | NodewtComServer | |||
| 1.3.6.1.4.1.5040.1.2 | NodewtWebio | |||
| 1.3.6.1.4.1.5040.1.2.17 | NodewtWebioAn1GraphPt | |||
| 1.3.6.1.4.1.5040.1.2.17.1 | NodewtWebioAn1GraphPtTemp | |||
| 1.3.6.1.4.1.5040.1.2.17.1.1 | ScalarwtWebioAn1GraphPtSensors | read-only | mandatory | Number of temperature sensors |
| 1.3.6.1.4.1.5040.1.2.17.1.2 | TablewtWebioAn1GraphPtSensorTable | not-accessible | mandatory | List of sensors. |
| 1.3.6.1.4.1.5040.1.2.17.1.2.1 | RowwtWebioAn1GraphPtSensorEntry | not-accessible | mandatory | Temperature sensor numbers. |
| 1.3.6.1.4.1.5040.1.2.17.1.2.1.1 | ColumnwtWebioAn1GraphPtSensorNo | read-only | mandatory | Temperature sensor number. |
| 1.3.6.1.4.1.5040.1.2.17.1.3 | TablewtWebioAn1GraphPtTempValueTable | not-accessible | mandatory | List of temperature values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.17.1.3.1 | RowwtWebioAn1GraphPtTempValueEntry | not-accessible | mandatory | Temperatures of the sensors. |
| 1.3.6.1.4.1.5040.1.2.17.1.3.1.1 | ColumnwtWebioAn1GraphPtTempValue | read-only | mandatory | Temperature value of the sensor, ASCII, 5 characters in length. |
| 1.3.6.1.4.1.5040.1.2.17.1.4 | TablewtWebioAn1GraphPtBinaryTempValueTable | not-accessible | mandatory | List of binary temperature values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.17.1.4.1 | RowwtWebioAn1GraphPtBinaryTempValueEntry | not-accessible | mandatory | Binary temperature values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.17.1.4.1.1 | ColumnwtWebioAn1GraphPtBinaryTempValue | read-only | mandatory | Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x7FFF indicates an invalid measured value. |
| 1.3.6.1.4.1.5040.1.2.17.1.8 | TablewtWebioAn1GraphPtTempValuePktTable | not-accessible | mandatory | List of temperature values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.17.1.8.1 | RowwtWebioAn1GraphPtTempValuePktEntry | not-accessible | mandatory | Temperatures of the sensors. |
| 1.3.6.1.4.1.5040.1.2.17.1.8.1.1 | ColumnwtWebioAn1GraphPtTempValuePkt | read-only | mandatory | Temperature value of the sensor, ASCII, 5 characters in length, decimal point. |
| 1.3.6.1.4.1.5040.1.2.17.2 | NodewtWebioAn1GraphPtSessCntrl | |||
| 1.3.6.1.4.1.5040.1.2.17.2.1 | ScalarwtWebioAn1GraphPtSessCntrlPassword | read-write | mandatory | Entering this password opens a session which is ended by writing a 1 to wtWebioAn1GraphPtSessCntrlLogout. When read this variable provides a string of length z… |
| 1.3.6.1.4.1.5040.1.2.17.2.2 | ScalarwtWebioAn1GraphPtSessCntrlConfigMode | read-only | mandatory | When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is… |
| 1.3.6.1.4.1.5040.1.2.17.2.3 | ScalarwtWebioAn1GraphPtSessCntrlLogout | read-write | mandatory | If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters ar… |
| 1.3.6.1.4.1.5040.1.2.17.2.4 | ScalarwtWebioAn1GraphPtSessCntrlAdminPassword | read-write | mandatory | This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid p… |
| 1.3.6.1.4.1.5040.1.2.17.2.5 | ScalarwtWebioAn1GraphPtSessCntrlConfigPassword | read-write | mandatory | This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was ass… |
| 1.3.6.1.4.1.5040.1.2.17.3 | NodewtWebioAn1GraphPtConfig | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1 | NodewtWebioAn1GraphPtDevice | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.1 | NodewtWebioAn1GraphPtText | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.1.1 | ScalarwtWebioAn1GraphPtDeviceName | read-write | mandatory | Name of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.1.2 | ScalarwtWebioAn1GraphPtDeviceText | read-write | mandatory | Description of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.1.3 | ScalarwtWebioAn1GraphPtDeviceLocation | read-write | mandatory | Description of the location of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.1.4 | ScalarwtWebioAn1GraphPtDeviceContact | read-write | mandatory | Contact address of the system operator of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2 | NodewtWebioAn1GraphPtTimeDate | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1 | NodewtWebioAn1GraphPtTimeZone | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.1 | ScalarwtWebioAn1GraphPtTzOffsetHrs | read-write | mandatory | Offset hours for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.2 | ScalarwtWebioAn1GraphPtTzOffsetMin | read-write | mandatory | Offset minutes for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.3 | ScalarwtWebioAn1GraphPtTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.4 | ScalarwtWebioAn1GraphPtStTzOffsetHrs | read-write | mandatory | Offset hours of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.5 | ScalarwtWebioAn1GraphPtStTzOffsetMin | read-write | mandatory | Offset minutes of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.6 | ScalarwtWebioAn1GraphPtStTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.7 | ScalarwtWebioAn1GraphPtStTzStartMonth | read-write | mandatory | Month in which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.8 | ScalarwtWebioAn1GraphPtStTzStartMode | read-write | mandatory | Mode of the day of the week for which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.9 | ScalarwtWebioAn1GraphPtStTzStartWday | read-write | mandatory | Day of the week on which the change is made from winter time to summer time |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.10 | ScalarwtWebioAn1GraphPtStTzStartHrs | read-write | mandatory | Hour in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.11 | ScalarwtWebioAn1GraphPtStTzStartMin | read-write | mandatory | Minute in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.12 | ScalarwtWebioAn1GraphPtStTzStopMonth | read-write | mandatory | Month in which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.13 | ScalarwtWebioAn1GraphPtStTzStopMode | read-write | mandatory | Mode of the week day on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.14 | ScalarwtWebioAn1GraphPtStTzStopWday | read-write | mandatory | Day of the week on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.15 | ScalarwtWebioAn1GraphPtStTzStopHrs | read-write | mandatory | Hour at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.1.16 | ScalarwtWebioAn1GraphPtStTzStopMin | read-write | mandatory | Minute at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.2 | NodewtWebioAn1GraphPtTimeServer | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.2.1 | ScalarwtWebioAn1GraphPtTimeServer1 | read-write | mandatory | IP address or name of the 1st time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.2.2 | ScalarwtWebioAn1GraphPtTimeServer2 | read-write | mandatory | IP address or name of the 2nd time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.2.3 | ScalarwtWebioAn1GraphPtTsEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.2.4 | ScalarwtWebioAn1GraphPtTsSyncTime | read-write | mandatory | Daily synchronisation time with the time server (hour: 0-23). |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.3 | NodewtWebioAn1GraphPtDeviceClock | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.3.1 | ScalarwtWebioAn1GraphPtClockHrs | read-write | mandatory | Clock hours taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.3.2 | ScalarwtWebioAn1GraphPtClockMin | read-write | mandatory | Clock minutes taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.3.3 | ScalarwtWebioAn1GraphPtClockDay | read-write | mandatory | Date: Day of the month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.3.4 | ScalarwtWebioAn1GraphPtClockMonth | read-write | mandatory | Date: Month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.2.3.5 | ScalarwtWebioAn1GraphPtClockYear | read-write | mandatory | Date: Year, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3 | NodewtWebioAn1GraphPtBasic | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.1 | NodewtWebioAn1GraphPtNetwork | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.1.1 | ScalarwtWebioAn1GraphPtIpAddress | read-write | mandatory | IP address of the Webio |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.1.2 | ScalarwtWebioAn1GraphPtSubnetMask | read-write | mandatory | Subnet mask of the Webio |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.1.3 | ScalarwtWebioAn1GraphPtGateway | read-write | mandatory | Gateway of the Webio |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.1.4 | ScalarwtWebioAn1GraphPtDnsServer1 | read-write | mandatory | IP address of the 1st DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.1.5 | ScalarwtWebioAn1GraphPtDnsServer2 | read-write | mandatory | IP address of the 2nd DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.1.6 | ScalarwtWebioAn1GraphPtAddConfig | read-write | mandatory | Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.2 | NodewtWebioAn1GraphPtHTTP | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.2.1 | ScalarwtWebioAn1GraphPtStartup | read-write | mandatory | Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selecte… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.2.2 | ScalarwtWebioAn1GraphPtGetHeaderEnable | read-write | mandatory | If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Oc… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.2.3 | ScalarwtWebioAn1GraphPtHttpPort | read-write | mandatory | Definition of the standard HTML port (Default: 80). |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3 | NodewtWebioAn1GraphPtMail | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.1 | ScalarwtWebioAn1GraphPtMailAdName | read-write | mandatory | Device name for mail administration. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.2 | ScalarwtWebioAn1GraphPtMailReply | read-write | mandatory | Reply address for the mail server. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.3 | ScalarwtWebioAn1GraphPtMailServer | read-write | mandatory | Name or IP address of the mail server. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.4 | ScalarwtWebioAn1GraphPtMailEnable | read-write | mandatory | Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.5 | ScalarwtWebioAn1GraphPtMailAuthentication | read-write | mandatory | Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: u… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.6 | ScalarwtWebioAn1GraphPtMailAuthUser | read-write | mandatory | Name of the user to be authenticated. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.7 | ScalarwtWebioAn1GraphPtMailAuthPassword | read-write | mandatory | Authentication password. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.3.8 | ScalarwtWebioAn1GraphPtMailPop3Server | read-write | mandatory | Name or Ip-address of the POP3 Servers. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.4 | NodewtWebioAn1GraphPtSNMP | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.4.1 | ScalarwtWebioAn1GraphPtSnmpCommunityStringRead | read-write | mandatory | Community string read only |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.4.2 | ScalarwtWebioAn1GraphPtSnmpCommunityStringReadWrite | read-write | mandatory | Community string read / write |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.4.3 | ScalarwtWebioAn1GraphPtSystemTrapManagerIP | read-write | mandatory | Name or IP address of the TCP server which accepts the system trap. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.4.4 | ScalarwtWebioAn1GraphPtSystemTrapEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.4.5 | ScalarwtWebioAn1GraphPtSnmpEnable | read-write | mandatory | Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compare… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.4.6 | ScalarwtWebioAn1GraphPtSnmpCommunityStringTrap | read-write | mandatory | Community string send within traps. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.5 | NodewtWebioAn1GraphPtUDP | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.5.1 | ScalarwtWebioAn1GraphPtUdpPort | read-write | mandatory | Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.5.2 | ScalarwtWebioAn1GraphPtUdpEnable | read-write | mandatory | Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.6 | NodewtWebioAn1GraphPtSyslog | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.6.1 | ScalarwtWebioAn1GraphPtSyslogServerIP | read-write | mandatory | Name or IP address of the Syslog server, which accepts the Syslog messgaes. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.6.2 | ScalarwtWebioAn1GraphPtSyslogServerPort | read-write | mandatory | Portnumber of the Syslog servers, default 514. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.6.3 | ScalarwtWebioAn1GraphPtSyslogSystemMessagesEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.6.4 | ScalarwtWebioAn1GraphPtSyslogEnable | read-write | mandatory | Set bit 0 to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7 | NodewtWebioAn1GraphPtFTP | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7.1 | ScalarwtWebioAn1GraphPtFTPServerIP | read-write | mandatory | Name or IP address of the FTP server, which accepts the FTP messages. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7.2 | ScalarwtWebioAn1GraphPtFTPServerControlPort | read-write | mandatory | Portnumber of the control port of the FTP server, default 21. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7.3 | ScalarwtWebioAn1GraphPtFTPUserName | read-write | mandatory | FTP Loggin: user name. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7.4 | ScalarwtWebioAn1GraphPtFTPPassword | read-write | mandatory | FTP Loggin: user password. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7.5 | ScalarwtWebioAn1GraphPtFTPAccount | read-write | mandatory | FTP Loggin: name of account. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7.6 | ScalarwtWebioAn1GraphPtFTPOption | read-write | mandatory | Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.7.7 | ScalarwtWebioAn1GraphPtFTPEnable | read-write | mandatory | Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable |
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.9 | NodewtWebioAn1GraphPtLanguage | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.3.9.1 | ScalarwtWebioAn1GraphPtLanguageSelect | read-write | mandatory | Language selection: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 2-7: unused Bit 1 : english Bit 0 : german |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4 | NodewtWebioAn1GraphPtDatalogger | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.1 | ScalarwtWebioAn1GraphPtLoggerTimebase | read-write | mandatory | Time base of the data logger |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.2 | ScalarwtWebioAn1GraphPtLoggerSensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be logged. Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.3 | ScalarwtWebioAn1GraphPtDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.4 | TablewtWebioAn1GraphPtSensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.4.1 | RowwtWebioAn1GraphPtSensorColorEntry | not-accessible | mandatory | Index numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.4.1.1 | ColumnwtWebioAn1GraphPtSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.5 | ScalarwtWebioAn1GraphPtAutoScaleEnable | read-write | mandatory | If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.6 | ScalarwtWebioAn1GraphPtVerticalUpperLimit | read-write | mandatory | This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.7 | ScalarwtWebioAn1GraphPtVerticalLowerLimit | read-write | mandatory | This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.4.8 | ScalarwtWebioAn1GraphPtHorizontalZoom | read-write | mandatory | Defines the default zoom stage, if no auto scaling is selected. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5 | NodewtWebioAn1GraphPtAlarm | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.1 | ScalarwtWebioAn1GraphPtAlarmCount | read-only | mandatory | Number of independent alarms. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.2 | TablewtWebioAn1GraphPtAlarmIfTable | not-accessible | mandatory | List of alarm indices. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.2.1 | RowwtWebioAn1GraphPtAlarmIfEntry | not-accessible | mandatory | Numbers of the alarms. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.2.1.1 | ColumnwtWebioAn1GraphPtAlarmNo | read-only | mandatory | Alarm number. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3 | TablewtWebioAn1GraphPtAlarmTable | not-accessible | mandatory | List of settings depending on the alarm number. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1 | RowwtWebioAn1GraphPtAlarmEntry | not-accessible | mandatory | Alarm parameters of the individual alarms. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.1 | ColumnwtWebioAn1GraphPtAlarmTrigger | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0 : Timer Bit 1 : ColdStart Bit 2 : WarmStart Bit 3 : Sensor lost Bit 4-7: unused… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.2 | ColumnwtWebioAn1GraphPtAlarmMin | read-write | mandatory | Minimum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.3 | ColumnwtWebioAn1GraphPtAlarmMax | read-write | mandatory | Maximum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.4 | ColumnwtWebioAn1GraphPtAlarmHysteresis | read-write | mandatory | Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.5 | ColumnwtWebioAn1GraphPtAlarmDelay | read-write | mandatory | Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.6 | ColumnwtWebioAn1GraphPtAlarmInterval | read-write | mandatory | Send interval for alarm messages. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.7 | ColumnwtWebioAn1GraphPtAlarmEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Mail Enable Bit 1 : SNMP Trap enable Bit 2 : TCP Client enable Bit … |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.8 | ColumnwtWebioAn1GraphPtAlarmEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.9 | ColumnwtWebioAn1GraphPtAlarmMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.10 | ColumnwtWebioAn1GraphPtAlarmMailText | read-write | mandatory | Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.11 | ColumnwtWebioAn1GraphPtAlarmManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.12 | ColumnwtWebioAn1GraphPtAlarmTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.13 | ColumnwtWebioAn1GraphPtAlarmMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.14 | ColumnwtWebioAn1GraphPtAlarmTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.15 | ColumnwtWebioAn1GraphPtAlarmTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.16 | ColumnwtWebioAn1GraphPtAlarmTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.17 | ColumnwtWebioAn1GraphPtAlarmClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.18 | ColumnwtWebioAn1GraphPtAlarmClearMailText | read-write | mandatory | Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.19 | ColumnwtWebioAn1GraphPtAlarmClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.20 | ColumnwtWebioAn1GraphPtAlarmClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.21 | ColumnwtWebioAn1GraphPtAlarmSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.22 | ColumnwtWebioAn1GraphPtAlarmSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.23 | ColumnwtWebioAn1GraphPtAlarmSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.24 | ColumnwtWebioAn1GraphPtAlarmSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.25 | ColumnwtWebioAn1GraphPtAlarmFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.26 | ColumnwtWebioAn1GraphPtAlarmFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.27 | ColumnwtWebioAn1GraphPtAlarmFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.28 | ColumnwtWebioAn1GraphPtAlarmFtpClearText | read-write | mandatory | Alarm clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.29 | ColumnwtWebioAn1GraphPtAlarmFtpOption | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.30 | ColumnwtWebioAn1GraphPtAlarmTimerCron | read-write | mandatory | This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a spa… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.31 | ColumnwtWebioAn1GraphPtAlarmDeltaTemp | read-write | mandatory | Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.39 | ColumnwtWebioAn1GraphPtAlarmName | read-write | mandatory | Alert name |
| 1.3.6.1.4.1.5040.1.2.17.3.1.5.3.1.40 | ColumnwtWebioAn1GraphPtAlarmActive | read-write | mandatory | Alert active 1 = ON 0 = OFF |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6 | NodewtWebioAn1GraphPtGraphics | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.1 | NodewtWebioAn1GraphPtGraphicsBase | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.1.1 | ScalarwtWebioAn1GraphPtGraphicsBaseEnable | read-write | mandatory | Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.1.2 | ScalarwtWebioAn1GraphPtGraphicsBaseWidth | read-write | mandatory | Defines the width of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.1.3 | ScalarwtWebioAn1GraphPtGraphicsBaseHeight | read-write | mandatory | Defines the height of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.1.4 | ScalarwtWebioAn1GraphPtGraphicsBaseFrameColor | read-write | mandatory | Frame color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.1.5 | ScalarwtWebioAn1GraphPtGraphicsBaseBackgroundColor | read-write | mandatory | Background color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.1.6 | ScalarwtWebioAn1GraphPtGraphicsBasePollingrate | read-write | mandatory | Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.2 | NodewtWebioAn1GraphPtGraphicsSelect | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.2.1 | ScalarwtWebioAn1GraphPtGraphicsSelectDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.2.2 | ScalarwtWebioAn1GraphPtGraphicsSelectDisplayShowExtrem | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Sen… |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.2.3 | TablewtWebioAn1GraphPt2SensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.2.3.1 | RowwtWebioAn1GraphPt2SensorColorEntry | not-accessible | mandatory | Numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.2.3.1.1 | ColumnwtWebioAn1GraphPt2GraphicsSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.2.3.1.2 | ColumnwtWebioAn1GraphPt2GraphicsSelectScale | read-write | mandatory | Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3 | NodewtWebioAn1GraphPtGraphicsScale | |||
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.1 | ScalarwtWebioAn1GraphPtGraphicsScaleAutoScaleEnable | read-write | mandatory | Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.2 | ScalarwtWebioAn1GraphPtGraphicsScaleAutoFitEnable | read-write | mandatory | Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.3 | ScalarwtWebioAn1GraphPtGraphicsScale1Min | read-only | mandatory | Scale 1: Minimum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.4 | ScalarwtWebioAn1GraphPtGraphicsScale2Min | read-only | mandatory | Scale 2: Minimum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.5 | ScalarwtWebioAn1GraphPtGraphicsScale3Min | read-only | mandatory | Scale 3: Minimum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.6 | ScalarwtWebioAn1GraphPtGraphicsScale4Min | read-only | mandatory | Scale 4: Minimum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.7 | ScalarwtWebioAn1GraphPtGraphicsScale1Max | read-only | mandatory | Scale 1: Maximum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.8 | ScalarwtWebioAn1GraphPtGraphicsScale2Max | read-only | mandatory | Scale 2: Maximum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.9 | ScalarwtWebioAn1GraphPtGraphicsScale3Max | read-only | mandatory | Scale 3: Maximum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.10 | ScalarwtWebioAn1GraphPtGraphicsScale4Max | read-only | mandatory | Scale 4: Maximum. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.11 | ScalarwtWebioAn1GraphPtGraphicsScale1Unit | read-only | mandatory | Scale 1: Unit. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.12 | ScalarwtWebioAn1GraphPtGraphicsScale2Unit | read-only | mandatory | Scale 2: Unit. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.13 | ScalarwtWebioAn1GraphPtGraphicsScale3Unit | read-only | mandatory | Scale 3: Unit. |
| 1.3.6.1.4.1.5040.1.2.17.3.1.6.3.14 | ScalarwtWebioAn1GraphPtGraphicsScale4Unit | read-only | mandatory | Scale 4: Unit. |
| 1.3.6.1.4.1.5040.1.2.17.3.2 | NodewtWebioAn1GraphPtPorts | |||
| 1.3.6.1.4.1.5040.1.2.17.3.2.1 | TablewtWebioAn1GraphPtPortTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1 | RowwtWebioAn1GraphPtPortEntry | not-accessible | mandatory | Sensor parameters for the individual sensors. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.1 | ColumnwtWebioAn1GraphPtPortName | read-write | mandatory | Name of the sensor. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.2 | ColumnwtWebioAn1GraphPtPortText | read-write | mandatory | Description of the sensor. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.3 | ColumnwtWebioAn1GraphPtPortOffset1 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.4 | ColumnwtWebioAn1GraphPtPortTemperature1 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.5 | ColumnwtWebioAn1GraphPtPortOffset2 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.6 | ColumnwtWebioAn1GraphPtPortTemperature2 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.7 | ColumnwtWebioAn1GraphPtPortComment | read-write | mandatory | Offset calibration: informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.17.3.2.1.1.8 | ColumnwtWebioAn1GraphPtPortSensorSelect | read-write | mandatory | Binary coded options of the sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : PT100 (default) Bit 1 : PT1000 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.17.3.3 | NodewtWebioAn1GraphPtManufact | |||
| 1.3.6.1.4.1.5040.1.2.17.3.3.1 | ScalarwtWebioAn1GraphPtMfName | read-write | mandatory | Manufacturer company name |
| 1.3.6.1.4.1.5040.1.2.17.3.3.2 | ScalarwtWebioAn1GraphPtMfAddr | read-write | mandatory | Manufacturer address. |
| 1.3.6.1.4.1.5040.1.2.17.3.3.3 | ScalarwtWebioAn1GraphPtMfHotline | read-write | mandatory | Manufacturer hotline. |
| 1.3.6.1.4.1.5040.1.2.17.3.3.4 | ScalarwtWebioAn1GraphPtMfInternet | read-write | mandatory | Manufacturer Internet address. |
| 1.3.6.1.4.1.5040.1.2.17.3.3.5 | ScalarwtWebioAn1GraphPtMfDeviceTyp | read-write | mandatory | Manufacturer device name (model number). |
| 1.3.6.1.4.1.5040.1.2.17.3.3.6 | ScalarwtWebioAn1GraphPtMfOrderNo | read-write | mandatory | Manufacturer part number. |
| 1.3.6.1.4.1.5040.1.2.17.4 | NodewtWebioAn1GraphPtDiag | |||
| 1.3.6.1.4.1.5040.1.2.17.4.1 | ScalarwtWebioAn1GraphPtDiagErrorCount | read-only | mandatory | Number of entries in the error memory. |
| 1.3.6.1.4.1.5040.1.2.17.4.2 | ScalarwtWebioAn1GraphPtDiagBinaryError | read-only | mandatory | Error causes coded bit-by-bit. |
| 1.3.6.1.4.1.5040.1.2.17.4.3 | ScalarwtWebioAn1GraphPtDiagErrorIndex | read-write | mandatory | The value of this variable is used as an index to read an error massege from wtWebioAn1GraphPtDiagErrorMessage. Errors are numbered from 1 to wtWebioAn1GraphPt… |
| 1.3.6.1.4.1.5040.1.2.17.4.4 | ScalarwtWebioAn1GraphPtDiagErrorMessage | read-only | mandatory | Using wtWebioAn1GraphPtDiagErrorIndex as an index, the appropriate message is available. |
| 1.3.6.1.4.1.5040.1.2.17.4.5 | ScalarwtWebioAn1GraphPtDiagErrorClear | write-only | mandatory | Writing 1 into this variable clears all diagnosis messages. |
| 1.3.6.1.4.1.5040.1.2.17.31 | NodewtWebioAn1GraphPtAlert1 | This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.32 | NodewtWebioAn1GraphPtAlert2 | This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.33 | NodewtWebioAn1GraphPtAlert3 | This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.34 | NodewtWebioAn1GraphPtAlert4 | This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.35 | NodewtWebioAn1GraphPtAlert5 | This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.36 | NodewtWebioAn1GraphPtAlert6 | This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.37 | NodewtWebioAn1GraphPtAlert7 | This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.38 | NodewtWebioAn1GraphPtAlert8 | This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.91 | NodewtWebioAn1GraphPtAlert9 | This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.92 | NodewtWebioAn1GraphPtAlert10 | This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.93 | NodewtWebioAn1GraphPtAlert11 | This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.94 | NodewtWebioAn1GraphPtAlert12 | This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.95 | NodewtWebioAn1GraphPtAlert13 | This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.96 | NodewtWebioAn1GraphPtAlert14 | This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.97 | NodewtWebioAn1GraphPtAlert15 | This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.98 | NodewtWebioAn1GraphPtAlert16 | This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.17.110 | NodewtWebioAn1GraphPtAlertDiag | This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23 | NodewtWebioAn1GraphPtSw | |||
| 1.3.6.1.4.1.5040.1.2.23.1 | NodewtWebioAn1GraphPtSwTemp | |||
| 1.3.6.1.4.1.5040.1.2.23.1.1 | ScalarwtWebioAn1GraphPtSwSensors | read-only | mandatory | Number of temperature sensors |
| 1.3.6.1.4.1.5040.1.2.23.1.2 | TablewtWebioAn1GraphPtSwSensorTable | not-accessible | mandatory | List of sensors. |
| 1.3.6.1.4.1.5040.1.2.23.1.2.1 | RowwtWebioAn1GraphPtSwSensorEntry | not-accessible | mandatory | Temperature sensor numbers. |
| 1.3.6.1.4.1.5040.1.2.23.1.2.1.1 | ColumnwtWebioAn1GraphPtSwSensorNo | read-only | mandatory | Temperature sensor number. |
| 1.3.6.1.4.1.5040.1.2.23.1.3 | TablewtWebioAn1GraphPtSwTempValueTable | not-accessible | mandatory | List of temperature values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.23.1.3.1 | RowwtWebioAn1GraphPtSwTempValueEntry | not-accessible | mandatory | Temperatures of the sensors. |
| 1.3.6.1.4.1.5040.1.2.23.1.3.1.1 | ColumnwtWebioAn1GraphPtSwTempValue | read-only | mandatory | Temperature value of the sensor, ASCII, 5 characters in length. |
| 1.3.6.1.4.1.5040.1.2.23.1.4 | TablewtWebioAn1GraphPtSwBinaryTempValueTable | not-accessible | mandatory | List of binary temperature values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.23.1.4.1 | RowwtWebioAn1GraphPtSwBinaryTempValueEntry | not-accessible | mandatory | Binary temperature values of the sensors. |
| 1.3.6.1.4.1.5040.1.2.23.1.4.1.1 | ColumnwtWebioAn1GraphPtSwBinaryTempValue | read-only | mandatory | Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x7FFF indicates an invalid measured value. |
| 1.3.6.1.4.1.5040.1.2.23.1.5 | ScalarwtWebioAn1GraphPtSwOutputs | read-only | mandatory | Number of outputs. |
| 1.3.6.1.4.1.5040.1.2.23.1.6 | TablewtWebioAn1GraphPtSwOutputTable | not-accessible | mandatory | List of outputs. |
| 1.3.6.1.4.1.5040.1.2.23.1.6.1 | RowwtWebioAn1GraphPtSwOutputEntry | not-accessible | mandatory | Output numbers. |
| 1.3.6.1.4.1.5040.1.2.23.1.6.1.1 | ColumnwtWebioAn1GraphPtSwOutputNo | read-only | mandatory | Output number. |
| 1.3.6.1.4.1.5040.1.2.23.1.7 | TablewtWebioAn1GraphPtSwBinaryOutputValueTable | not-accessible | mandatory | List of binary ouput values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.23.1.7.1 | RowwtWebioAn1GraphPtSwBinaryOutputValueEntry | not-accessible | mandatory | Binary states of the outputs. |
| 1.3.6.1.4.1.5040.1.2.23.1.7.1.1 | ColumnwtWebioAn1GraphPtSwBinaryOutputValue | read-only | mandatory | Binary state of the output. |
| 1.3.6.1.4.1.5040.1.2.23.1.8 | TablewtWebioAn1GraphPtSwTempValuePktTable | not-accessible | mandatory | List of temperature values corresponding to the channel numbers. |
| 1.3.6.1.4.1.5040.1.2.23.1.8.1 | RowwtWebioAn1GraphPtSwTempValuePktEntry | not-accessible | mandatory | Temperatures of the sensors. |
| 1.3.6.1.4.1.5040.1.2.23.1.8.1.1 | ColumnwtWebioAn1GraphPtSwTempValuePkt | read-only | mandatory | Temperature value of the sensor, ASCII, 5 characters in length, decimal point. |
| 1.3.6.1.4.1.5040.1.2.23.2 | NodewtWebioAn1GraphPtSwSessCntrl | |||
| 1.3.6.1.4.1.5040.1.2.23.2.1 | ScalarwtWebioAn1GraphPtSwSessCntrlPassword | read-write | mandatory | Entering this password opens a session which is ended by writing a 1 to wtWebioAn1GraphPtSwSessCntrlLogout. When read this variable provides a string of length… |
| 1.3.6.1.4.1.5040.1.2.23.2.2 | ScalarwtWebioAn1GraphPtSwSessCntrlConfigMode | read-only | mandatory | When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is… |
| 1.3.6.1.4.1.5040.1.2.23.2.3 | ScalarwtWebioAn1GraphPtSwSessCntrlLogout | read-write | mandatory | If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters ar… |
| 1.3.6.1.4.1.5040.1.2.23.2.4 | ScalarwtWebioAn1GraphPtSwSessCntrlAdminPassword | read-write | mandatory | This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid p… |
| 1.3.6.1.4.1.5040.1.2.23.2.5 | ScalarwtWebioAn1GraphPtSwSessCntrlConfigPassword | read-write | mandatory | This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was ass… |
| 1.3.6.1.4.1.5040.1.2.23.3 | NodewtWebioAn1GraphPtSwConfig | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1 | NodewtWebioAn1GraphPtSwDevice | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.1 | NodewtWebioAn1GraphPtSwText | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.1.1 | ScalarwtWebioAn1GraphPtSwDeviceName | read-write | mandatory | Name of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.1.2 | ScalarwtWebioAn1GraphPtSwDeviceText | read-write | mandatory | Description of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.1.3 | ScalarwtWebioAn1GraphPtSwDeviceLocation | read-write | mandatory | Description of the location of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.1.4 | ScalarwtWebioAn1GraphPtSwDeviceContact | read-write | mandatory | Contact address of the system operator of the Webio, which is user definable. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2 | NodewtWebioAn1GraphPtSwTimeDate | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1 | NodewtWebioAn1GraphPtSwTimeZone | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.1 | ScalarwtWebioAn1GraphPtSwTzOffsetHrs | read-write | mandatory | Offset hours for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.2 | ScalarwtWebioAn1GraphPtSwTzOffsetMin | read-write | mandatory | Offset minutes for the time zone (winter time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.3 | ScalarwtWebioAn1GraphPtSwTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.4 | ScalarwtWebioAn1GraphPtSwStTzOffsetHrs | read-write | mandatory | Offset hours of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.5 | ScalarwtWebioAn1GraphPtSwStTzOffsetMin | read-write | mandatory | Offset minutes of the time zone (summer time) with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.6 | ScalarwtWebioAn1GraphPtSwStTzEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.7 | ScalarwtWebioAn1GraphPtSwStTzStartMonth | read-write | mandatory | Month in which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.8 | ScalarwtWebioAn1GraphPtSwStTzStartMode | read-write | mandatory | Mode of the day of the week for which the change is made from winter time to summer time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.9 | ScalarwtWebioAn1GraphPtSwStTzStartWday | read-write | mandatory | Day of the week on which the change is made from winter time to summer time |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.10 | ScalarwtWebioAn1GraphPtSwStTzStartHrs | read-write | mandatory | Hour in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.11 | ScalarwtWebioAn1GraphPtSwStTzStartMin | read-write | mandatory | Minute in which the time zone is changed from winter to summer time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.12 | ScalarwtWebioAn1GraphPtSwStTzStopMonth | read-write | mandatory | Month in which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.13 | ScalarwtWebioAn1GraphPtSwStTzStopMode | read-write | mandatory | Mode of the week day on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.14 | ScalarwtWebioAn1GraphPtSwStTzStopWday | read-write | mandatory | Day of the week on which the change is made from summer time to winter time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.15 | ScalarwtWebioAn1GraphPtSwStTzStopHrs | read-write | mandatory | Hour at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.1.16 | ScalarwtWebioAn1GraphPtSwStTzStopMin | read-write | mandatory | Minute at which the time zone is changed from summer to winter time with respect to UTC. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.2 | NodewtWebioAn1GraphPtSwTimeServer | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.2.1 | ScalarwtWebioAn1GraphPtSwTimeServer1 | read-write | mandatory | IP address or name of the 1st time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.2.2 | ScalarwtWebioAn1GraphPtSwTimeServer2 | read-write | mandatory | IP address or name of the 2nd time server in ASCII |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.2.3 | ScalarwtWebioAn1GraphPtSwTsEnable | read-write | mandatory | Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.2.4 | ScalarwtWebioAn1GraphPtSwTsSyncTime | read-write | mandatory | Daily synchronisation time with the time server (hour: 0-23). |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.3 | NodewtWebioAn1GraphPtSwDeviceClock | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.3.1 | ScalarwtWebioAn1GraphPtSwClockHrs | read-write | mandatory | Clock hours taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.3.2 | ScalarwtWebioAn1GraphPtSwClockMin | read-write | mandatory | Clock minutes taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.3.3 | ScalarwtWebioAn1GraphPtSwClockDay | read-write | mandatory | Date: Day of the month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.3.4 | ScalarwtWebioAn1GraphPtSwClockMonth | read-write | mandatory | Date: Month, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.2.3.5 | ScalarwtWebioAn1GraphPtSwClockYear | read-write | mandatory | Date: Year, taking into account the time zone settings. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3 | NodewtWebioAn1GraphPtSwBasic | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.1 | NodewtWebioAn1GraphPtSwNetwork | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.1.1 | ScalarwtWebioAn1GraphPtSwIpAddress | read-write | mandatory | IP address of the Webio |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.1.2 | ScalarwtWebioAn1GraphPtSwSubnetMask | read-write | mandatory | Subnet mask of the Webio |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.1.3 | ScalarwtWebioAn1GraphPtSwGateway | read-write | mandatory | Gateway of the Webio |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.1.4 | ScalarwtWebioAn1GraphPtSwDnsServer1 | read-write | mandatory | IP address of the 1st DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.1.5 | ScalarwtWebioAn1GraphPtSwDnsServer2 | read-write | mandatory | IP address of the 2nd DNS server in ASCII |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.1.6 | ScalarwtWebioAn1GraphPtSwAddConfig | read-write | mandatory | Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.2 | NodewtWebioAn1GraphPtSwHTTP | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.2.1 | ScalarwtWebioAn1GraphPtSwStartup | read-write | mandatory | Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selecte… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.2.2 | ScalarwtWebioAn1GraphPtSwGetHeaderEnable | read-write | mandatory | If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Oc… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.2.3 | ScalarwtWebioAn1GraphPtSwHttpPort | read-write | mandatory | Definition of the standard HTML port (Default: 80). |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3 | NodewtWebioAn1GraphPtSwMail | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.1 | ScalarwtWebioAn1GraphPtSwMailAdName | read-write | mandatory | Device name for mail administration. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.2 | ScalarwtWebioAn1GraphPtSwMailReply | read-write | mandatory | Reply address for the mail server. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.3 | ScalarwtWebioAn1GraphPtSwMailServer | read-write | mandatory | Name or IP address of the mail server. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.4 | ScalarwtWebioAn1MailEnable | read-write | mandatory | Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.5 | ScalarwtWebioAn1GraphPtSwMailAuthentication | read-write | mandatory | Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: u… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.6 | ScalarwtWebioAn1GraphPtSwMailAuthUser | read-write | mandatory | Name of the user to be authenticated. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.7 | ScalarwtWebioAn1GraphPtSwMailAuthPassword | read-write | mandatory | Authentication password. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.3.8 | ScalarwtWebioAn1GraphPtSwMailPop3Server | read-write | mandatory | Name or Ip-address of the POP3 Servers. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.4 | NodewtWebioAn1GraphPtSwSNMP | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.4.1 | ScalarwtWebioAn1GraphPtSwSnmpCommunityStringRead | read-write | mandatory | Community string read only |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.4.2 | ScalarwtWebioAn1GraphPtSwSnmpCommunityStringReadWrite | read-write | mandatory | Community string read / write |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.4.3 | ScalarwtWebioAn1GraphPtSwSystemTrapManagerIP | read-write | mandatory | Name or IP address of the TCP server which accepts the system trap. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.4.4 | ScalarwtWebioAn1GraphPtSwSystemTrapEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.4.5 | ScalarwtWebioAn1GraphPtSwSnmpEnable | read-write | mandatory | Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compare… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.4.6 | ScalarwtWebioAn1GraphPtSwSnmpCommunityStringTrap | read-write | mandatory | Community string send within traps. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.5 | NodewtWebioAn1GraphPtSwUDP | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.5.1 | ScalarwtWebioAn1GraphPtSwUdpPort | read-write | mandatory | Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.5.2 | ScalarwtWebioAn1GraphPtSwUdpEnable | read-write | mandatory | Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.6 | NodewtWebioAn1GraphPtSwSyslog | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.6.1 | ScalarwtWebioAn1GraphPtSwSyslogServerIP | read-write | mandatory | Name or IP address of the Syslog server, which accepts the Syslog messgaes. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.6.2 | ScalarwtWebioAn1GraphPtSwSyslogServerPort | read-write | mandatory | Portnumber of the Syslog servers, default 514. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.6.3 | ScalarwtWebioAn1GraphPtSwSyslogSystemMessagesEnable | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.6.4 | ScalarwtWebioAn1GraphPtSwSyslogEnable | read-write | mandatory | Set bit 0 to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7 | NodewtWebioAn1GraphPtSwFTP | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7.1 | ScalarwtWebioAn1GraphPtSwFTPServerIP | read-write | mandatory | Name or IP address of the FTP server, which accepts the FTP messages. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7.2 | ScalarwtWebioAn1GraphPtSwFTPServerControlPort | read-write | mandatory | Portnumber of the control port of the FTP server, default 21. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7.3 | ScalarwtWebioAn1GraphPtSwFTPUserName | read-write | mandatory | FTP Loggin: user name. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7.4 | ScalarwtWebioAn1GraphPtSwFTPPassword | read-write | mandatory | FTP Loggin: user password. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7.5 | ScalarwtWebioAn1GraphPtSwFTPAccount | read-write | mandatory | FTP Loggin: name of account. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7.6 | ScalarwtWebioAn1GraphPtSwFTPOption | read-write | mandatory | Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.7.7 | ScalarwtWebioAn1GraphPtSwFTPEnable | read-write | mandatory | Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable |
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.9 | NodewtWebioAn1GraphPtSwLanguage | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.3.9.1 | ScalarwtWebioAn1GraphPtSwLanguageSelect | read-write | mandatory | Language selection: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 2-7: unused Bit 1 : English Bit 0 : German |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4 | NodewtWebioAn1GraphPtSwDatalogger | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.1 | ScalarwtWebioAn1GraphPtSwLoggerTimebase | read-write | mandatory | Time base of the data logger |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.2 | ScalarwtWebioAn1GraphPtSwLoggerSensorSel | read-write | mandatory | Binary coded sensor / output selection: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Output 1 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.3 | ScalarwtWebioAn1GraphPtSwDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors / outputs will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Oct… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.4 | TablewtWebioAn1GraphPtSwSensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.4.1 | RowwtWebioAn1GraphPtSwSensorColorEntry | not-accessible | mandatory | Index numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.4.1.1 | ColumnwtWebioAn1GraphPtSwSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.5 | ScalarwtWebioAn1GraphPtSwAutoScaleEnable | read-write | mandatory | If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.6 | ScalarwtWebioAn1GraphPtSwVerticalUpperLimit | read-write | mandatory | This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.7 | ScalarwtWebioAn1GraphPtSwVerticalLowerLimit | read-write | mandatory | This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal p… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.4.8 | ScalarwtWebioAn1GraphPtSwHorizontalZoom | read-write | mandatory | Defines the default zoom stage, if no auto scaling is selected. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5 | NodewtWebioAn1GraphPtSwAlarm | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.1 | ScalarwtWebioAn1GraphPtSwAlarmCount | read-only | mandatory | Number of independent alarms. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.2 | TablewtWebioAn1GraphPtSwAlarmIfTable | not-accessible | mandatory | List of alarm indices. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.2.1 | RowwtWebioAn1GraphPtSwAlarmIfEntry | not-accessible | mandatory | Numbers of the alarms. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.2.1.1 | ColumnwtWebioAn1GraphPtSwAlarmNo | read-only | mandatory | Alarm number. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3 | TablewtWebioAn1GraphPtSwAlarmTable | not-accessible | mandatory | List of settings depending on the alarm number. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1 | RowwtWebioAn1GraphPtSwAlarmEntry | not-accessible | mandatory | Alarm parameters of the individual alarms. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.1 | ColumnwtWebioAn1GraphPtSwAlarmTrigger | read-write | mandatory | Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0 : Timer Bit 1 : ColdStart Bit 2 : WarmStart Bit 3 : Sensor lost Bit 4-7: unused… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.2 | ColumnwtWebioAn1GraphPtSwAlarmMin | read-write | mandatory | Minimum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.3 | ColumnwtWebioAn1GraphPtSwAlarmMax | read-write | mandatory | Maximum temperature in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.4 | ColumnwtWebioAn1GraphPtSwAlarmHysteresis | read-write | mandatory | Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.5 | ColumnwtWebioAn1GraphPtSwAlarmDelay | read-write | mandatory | Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.6 | ColumnwtWebioAn1GraphPtSwAlarmInterval | read-write | mandatory | Send interval for alarm messages. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.7 | ColumnwtWebioAn1GraphPtSwAlarmEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Output switch enable Bit 1 : Mail Enable Bit 2 : SNMP Trap enable B… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.8 | ColumnwtWebioAn1GraphPtSwAlarmEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.9 | ColumnwtWebioAn1GraphPtSwAlarmMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.10 | ColumnwtWebioAn1GraphPtSwAlarmMailText | read-write | mandatory | Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.11 | ColumnwtWebioAn1GraphPtSwAlarmManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.12 | ColumnwtWebioAn1GraphPtSwAlarmTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.13 | ColumnwtWebioAn1GraphPtSwAlarmMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.14 | ColumnwtWebioAn1GraphPtSwAlarmTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.15 | ColumnwtWebioAn1GraphPtSwAlarmTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.16 | ColumnwtWebioAn1GraphPtSwAlarmTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.17 | ColumnwtWebioAn1GraphPtSwAlarmClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.18 | ColumnwtWebioAn1GraphPtSwAlarmClearMailText | read-write | mandatory | Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.19 | ColumnwtWebioAn1GraphPtSwAlarmClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.20 | ColumnwtWebioAn1GraphPtSwAlarmClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.21 | ColumnwtWebioAn1GraphPtSwAlarmSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.22 | ColumnwtWebioAn1GraphPtSwAlarmSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.23 | ColumnwtWebioAn1GraphPtSwAlarmSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.24 | ColumnwtWebioAn1GraphPtSwAlarmSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.25 | ColumnwtWebioAn1GraphPtSwAlarmFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.26 | ColumnwtWebioAn1GraphPtSwAlarmFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.27 | ColumnwtWebioAn1GraphPtSwAlarmFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.28 | ColumnwtWebioAn1GraphPtSwAlarmFtpClearText | read-write | mandatory | Alarm clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.29 | ColumnwtWebioAn1GraphPtSwAlarmFtpOptions | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.30 | ColumnwtWebioAn1GraphPtSwAlarmTimerCron | read-write | mandatory | This entry contains 5 text fields space or tab seperated for time trigger definition. Each field must match with the actual time to trigger a message, weekday … |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.31 | ColumnwtWebioAn1GraphPtSwAlarmDeltaTemp | read-write | mandatory | Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.39 | ColumnwtWebioAn1GraphPtSwAlarmName | read-write | mandatory | Alert name |
| 1.3.6.1.4.1.5040.1.2.23.3.1.5.3.1.40 | ColumnwtWebioAn1GraphPtSwAlarmActive | read-write | mandatory | Alert active 1 = ON 0 = OFF |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6 | NodewtWebioAn1GraphPtSwGraphics | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.1 | NodewtWebioAn1GraphPtSwGraphicsBase | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.1.1 | ScalarwtWebioAn1GraphPtSwGraphicsBaseEnable | read-write | mandatory | Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.1.2 | ScalarwtWebioAn1GraphPtSwGraphicsBaseWidth | read-write | mandatory | Defines the width of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.1.3 | ScalarwtWebioAn1GraphPtSwGraphicsBaseHeight | read-write | mandatory | Defines the height of the graphic in pixels. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.1.4 | ScalarwtWebioAn1GraphPtSwGraphicsBaseFrameColor | read-write | mandatory | Frame color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.1.5 | ScalarwtWebioAn1GraphPtSwGraphicsBaseBackgroundColor | read-write | mandatory | Background color definition in RGB. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.1.6 | ScalarwtWebioAn1GraphPtSwGraphicsBasePollingrate | read-write | mandatory | Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.2 | NodewtWebioAn1GraphPtSwGraphicsSelect | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.2.1 | ScalarwtWebioAn1GraphPtSwGraphicsSelectDisplaySensorSel | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit … |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.2.2 | ScalarwtWebioAn1GraphPtSwGraphicsSelectDisplayShowExtrem | read-write | mandatory | Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Sen… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.2.3 | TablewtWebioAn1GraphPtSw2SensorColorTable | not-accessible | mandatory | List of sensor colors for the praphical presentation. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.2.3.1 | RowwtWebioAn1GraphPtSw2SensorColorEntry | not-accessible | mandatory | Numbers of the sensors. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.2.3.1.1 | ColumnwtWebioAn1GraphPtSw2GraphicsSensorColor | read-write | mandatory | Color of the sensors at the praphical presention. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.2.3.1.2 | ColumnwtWebioAn1GraphPtSw2GraphicsSelectScale | read-write | mandatory | Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3 | NodewtWebioAn1GraphPtSwGraphicsScale | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.1 | ScalarwtWebioAn1GraphPtSwGraphicsScaleAutoScaleEnable | read-write | mandatory | Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.2 | ScalarwtWebioAn1GraphPtSwGraphicsScaleAutoFitEnable | read-write | mandatory | Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.3 | ScalarwtWebioAn1GraphPtSwGraphicsScale1Min | read-only | mandatory | Scale 1: Minimum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.4 | ScalarwtWebioAn1GraphPtSwGraphicsScale2Min | read-only | mandatory | Scale 2: Minimum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.5 | ScalarwtWebioAn1GraphPtSwGraphicsScale3Min | read-only | mandatory | Scale 3: Minimum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.6 | ScalarwtWebioAn1GraphPtSwGraphicsScale4Min | read-only | mandatory | Scale 4: Minimum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.7 | ScalarwtWebioAn1GraphPtSwGraphicsScale1Max | read-only | mandatory | Scale 1: Maximum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.8 | ScalarwtWebioAn1GraphPtSwGraphicsScale2Max | read-only | mandatory | Scale 2: Maximum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.9 | ScalarwtWebioAn1GraphPtSwGraphicsScale3Max | read-only | mandatory | Scale 3: Maximum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.10 | ScalarwtWebioAn1GraphPtSwGraphicsScale4Max | read-only | mandatory | Scale 4: Maximum. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.11 | ScalarwtWebioAn1GraphPtSwGraphicsScale1Unit | read-only | mandatory | Scale 1: Unit. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.12 | ScalarwtWebioAn1GraphPtSwGraphicsScale2Unit | read-only | mandatory | Scale 2: Unit. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.13 | ScalarwtWebioAn1GraphPtSwGraphicsScale3Unit | read-only | mandatory | Scale 3: Unit. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.6.3.14 | ScalarwtWebioAn1GraphPtSwGraphicsScale4Unit | read-only | mandatory | Scale 4: Unit. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7 | NodewtWebioAn1GraphPtSwReport | |||
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.1 | ScalarwtWebioAn1GraphPtSwReportCount | read-only | mandatory | Number of independent Reports. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.2 | TablewtWebioAn1GraphPtSwReportIfTable | not-accessible | mandatory | List of Report indices. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.2.1 | RowwtWebioAn1GraphPtSwReportIfEntry | not-accessible | mandatory | Numbers of the Reports. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.2.1.1 | ColumnwtWebioAn1GraphPtSwReportNo | read-only | mandatory | Report number. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3 | TablewtWebioAn1GraphPtSwReportTable | not-accessible | mandatory | List of settings depending on the Report number. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1 | RowwtWebioAn1GraphPtSwReportEntry | not-accessible | mandatory | Report parameters of the individual Reports. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.1 | ColumnwtWebioAn1GraphPtSwReportEnable | read-write | mandatory | Bin?r kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.2 | ColumnwtWebioAn1GraphPtSwReportTimerCron | read-write | mandatory | This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a spa… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.3 | ColumnwtWebioAn1GraphPtSwReportMethodeEnable | read-write | mandatory | Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: … |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.8 | ColumnwtWebioAn1GraphPtSwReportEMailAddr | read-write | mandatory | E-Mail address for sending the alarm mail to. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.9 | ColumnwtWebioAn1GraphPtSwReportMailSubject | read-write | mandatory | Subject line for alarm mail. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.10 | ColumnwtWebioAn1GraphPtSwReportMailText | read-write | mandatory | Report mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.11 | ColumnwtWebioAn1GraphPtSwReportManagerIP | read-write | mandatory | Name or IP address of the SNMP Manager which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.12 | ColumnwtWebioAn1GraphPtSwReportTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.13 | ColumnwtWebioAn1GraphPtSwReportMailOptions | read-write | mandatory | Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Logger.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unu… |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.14 | ColumnwtWebioAn1GraphPtSwReportTcpIpAddr | read-write | mandatory | Name or IP address of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.15 | ColumnwtWebioAn1GraphPtSwReportTcpPort | read-write | mandatory | Port number of the TCP server which accepts the trap. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.16 | ColumnwtWebioAn1GraphPtSwReportTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.17 | ColumnwtWebioAn1GraphPtSwReportClearMailSubject | read-write | mandatory | Subject line for alarm clear mail. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.18 | ColumnwtWebioAn1GraphPtSwReportClearMailText | read-write | mandatory | Report clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.19 | ColumnwtWebioAn1GraphPtSwReportClearTrapText | read-write | mandatory | This text is sent in the trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.20 | ColumnwtWebioAn1GraphPtSwReportClearTcpText | read-write | mandatory | This text is sent in the TCP trap body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.24 | ColumnwtWebioAn1GraphPtSwReportSyslogIpAddr | read-write | mandatory | IP address of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.25 | ColumnwtWebioAn1GraphPtSwReportSyslogPort | read-write | mandatory | Port number of the syslog server to which the Webio device should send syslog messages. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.26 | ColumnwtWebioAn1GraphPtSwReportSyslogText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.27 | ColumnwtWebioAn1GraphPtSwReportSyslogClearText | read-write | mandatory | Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of … |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.28 | ColumnwtWebioAn1GraphPtSwReportFtpDataPort | read-write | mandatory | Local data port: 1..65535 or AUTO: the next free port will be assigned. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.29 | ColumnwtWebioAn1GraphPtSwReportFtpFileName | read-write | mandatory | Name of the file including path informations. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.30 | ColumnwtWebioAn1GraphPtSwReportFtpText | read-write | mandatory | Message text to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.31 | ColumnwtWebioAn1GraphPtSwReportFtpClearText | read-write | mandatory | Report clear message to store on the FTP server. |
| 1.3.6.1.4.1.5040.1.2.23.3.1.7.3.1.32 | ColumnwtWebioAn1GraphPtSwReportFtpOption | read-write | mandatory | Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unu… |
| 1.3.6.1.4.1.5040.1.2.23.3.2 | NodewtWebioAn1GraphPtSwPorts | |||
| 1.3.6.1.4.1.5040.1.2.23.3.2.1 | TablewtWebioAn1GraphPtSwPortTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1 | RowwtWebioAn1GraphPtSwPortEntry | not-accessible | mandatory | Sensor parameters for the individual sensors. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.1 | ColumnwtWebioAn1GraphPtSwPortName | read-write | mandatory | Name of the sensor. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.2 | ColumnwtWebioAn1GraphPtSwPortText | read-write | mandatory | Description of the sensor. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.3 | ColumnwtWebioAn1GraphPtSwPortOffset1 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.4 | ColumnwtWebioAn1GraphPtSwPortTemperature1 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.5 | ColumnwtWebioAn1GraphPtSwPortOffset2 | read-write | mandatory | Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.6 | ColumnwtWebioAn1GraphPtSwPortTemperature2 | read-write | mandatory | Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.7 | ColumnwtWebioAn1GraphPtSwPortComment | read-write | mandatory | Offset calibration: informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.8 | ColumnwtWebioAn1GraphPtSwPortSensorSelect | read-write | mandatory | Binary coded options of the sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : PT100 (default) Bit 1 : PT1000 Bit 2-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.2.1.1.9 | ColumnwtWebioAn1GraphPtSwPortSensorUnit | read-write | mandatory | Binary coded options of the sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Celsius (default) Bit 1 : Fahrenheit Bit 2 : Kelvin Bit 3-… |
| 1.3.6.1.4.1.5040.1.2.23.3.2.3 | TablewtWebioAn1GraphPtSwPortOutputTable | not-accessible | mandatory | List of settings depending on the sensor number. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.3.1 | RowwtWebioAn1GraphPtSwPortOutputEntry | not-accessible | mandatory | Parameters for the individual outputs. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.3.1.1 | ColumnwtWebioAn1GraphPtSwPortOutputName | read-write | mandatory | Name of the output. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.3.1.2 | ColumnwtWebioAn1GraphPtSwPortOutputText | read-write | mandatory | Description of the output. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.3.1.3 | ColumnwtWebioAn1GraphPtSwPortOutputPolarity | read-write | mandatory | Binary coded options of the output: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Normally open (default) Bit 1 : Normally closed Bit 2-7: u… |
| 1.3.6.1.4.1.5040.1.2.23.3.2.3.1.4 | ColumnwtWebioAn1GraphPtSwPortOutputComment | read-write | mandatory | Additional informations of date, name of operator, reference devices. |
| 1.3.6.1.4.1.5040.1.2.23.3.2.3.1.5 | ColumnwtWebioAn1GraphPortOutputResetEnable | read-write | mandatory | Binary coded options of the output: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Manual Reset enable (default off) Bit 1-7: unused |
| 1.3.6.1.4.1.5040.1.2.23.3.3 | NodewtWebioAn1GraphPtSwManufact | |||
| 1.3.6.1.4.1.5040.1.2.23.3.3.1 | ScalarwtWebioAn1GraphPtSwMfName | read-write | mandatory | Manufacturer company name |
| 1.3.6.1.4.1.5040.1.2.23.3.3.2 | ScalarwtWebioAn1GraphPtSwMfAddr | read-write | mandatory | Manufacturer address. |
| 1.3.6.1.4.1.5040.1.2.23.3.3.3 | ScalarwtWebioAn1GraphPtSwMfHotline | read-write | mandatory | Manufacturer hotline. |
| 1.3.6.1.4.1.5040.1.2.23.3.3.4 | ScalarwtWebioAn1GraphPtSwMfInternet | read-write | mandatory | Manufacturer Internet address. |
| 1.3.6.1.4.1.5040.1.2.23.3.3.5 | ScalarwtWebioAn1GraphPtSwMfDeviceTyp | read-write | mandatory | Manufacturer device name (model number). |
| 1.3.6.1.4.1.5040.1.2.23.3.3.6 | ScalarwtWebioAn1GraphPtSwMfOrderNo | read-write | mandatory | Manufacturer part number. |
| 1.3.6.1.4.1.5040.1.2.23.4 | NodewtWebioAn1GraphPtSwDiag | |||
| 1.3.6.1.4.1.5040.1.2.23.4.1 | ScalarwtWebioAn1GraphPtSwDiagErrorCount | read-only | mandatory | Number of entries in the error memory. |
| 1.3.6.1.4.1.5040.1.2.23.4.2 | ScalarwtWebioAn1GraphPtSwDiagBinaryError | read-only | mandatory | Error causes coded bit-by-bit. |
| 1.3.6.1.4.1.5040.1.2.23.4.3 | ScalarwtWebioAn1GraphPtSwDiagErrorIndex | read-write | mandatory | The value of this variable is used as an index to read an error massege from wtWebioAn1GraphPtSwDiagErrorMessage. Errors are numbered from 1 to wtWebioAn1Graph… |
| 1.3.6.1.4.1.5040.1.2.23.4.4 | ScalarwtWebioAn1GraphPtSwDiagErrorMessage | read-only | mandatory | Using wtWebioAn1GraphPtSwDiagErrorIndex as an index, the appropriate message is available. |
| 1.3.6.1.4.1.5040.1.2.23.4.5 | ScalarwtWebioAn1GraphPtSwDiagErrorClear | write-only | mandatory | Writing 1 into this variable clears all diagnosis messages. |
| 1.3.6.1.4.1.5040.1.2.23.31 | NodewtWebioAn1GraphPtSwAlert1 | This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.32 | NodewtWebioAn1GraphPtSwAlert2 | This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.33 | NodewtWebioAn1GraphPtSwAlert3 | This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.34 | NodewtWebioAn1GraphPtSwAlert4 | This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.35 | NodewtWebioAn1GraphPtSwAlert5 | This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.36 | NodewtWebioAn1GraphPtSwAlert6 | This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.37 | NodewtWebioAn1GraphPtSwAlert7 | This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.38 | NodewtWebioAn1GraphPtSwAlert8 | This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.91 | NodewtWebioAn1GraphPtSwAlert9 | This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.92 | NodewtWebioAn1GraphPtSwAlert10 | This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.93 | NodewtWebioAn1GraphPtSwAlert11 | This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.94 | NodewtWebioAn1GraphPtSwAlert12 | This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.95 | NodewtWebioAn1GraphPtSwAlert13 | This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.96 | NodewtWebioAn1GraphPtSwAlert14 | This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.97 | NodewtWebioAn1GraphPtSwAlert15 | This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.98 | NodewtWebioAn1GraphPtSwAlert16 | This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | ||
| 1.3.6.1.4.1.5040.1.2.23.110 | NodewtWebioAn1GraphPtSwAlertDiag | This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. |