MIB Viewer

Wellfleet-CSMACD-MIB

83 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.18.3.4.1TablewfCSMACDTablenot-accessiblemandatoryCSMA/CD line record
1.3.6.1.4.1.18.3.4.1.1RowwfCSMACDEntrynot-accessiblemandatoryAn entry in the csmacd table
1.3.6.1.4.1.18.3.4.1.1.1ColumnwfCSMACDDeleteread-writemandatorycreate/delete parameter, dflt = created
1.3.6.1.4.1.18.3.4.1.1.2ColumnwfCSMACDEnableread-writemandatoryenable/disable parameter, dflt = enabled
1.3.6.1.4.1.18.3.4.1.1.3ColumnwfCSMACDStateread-onlymandatoryline driver state variable, Not Present, Init, Down, Up
1.3.6.1.4.1.18.3.4.1.1.4ColumnwfCSMACDSlotread-onlymandatoryinstance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.1.1.5ColumnwfCSMACDConnectorread-onlymandatoryinstance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined…
1.3.6.1.4.1.18.3.4.1.1.6ColumnwfCSMACDCctread-writemandatorycct number for this line instance
1.3.6.1.4.1.18.3.4.1.1.7ColumnwfCSMACDBoflread-writemandatorybofl parameter, dflt = enabled
1.3.6.1.4.1.18.3.4.1.1.8ColumnwfCSMACDBoflTmoread-writemandatorybofl parameter, dflt = 5. A value of zero has a special meaning. When bofl tmo is zero, the line is killed as soon as the link down down condition is determine…
1.3.6.1.4.1.18.3.4.1.1.9ColumnwfCSMACDMturead-onlymandatorymtu parameter, fixed
1.3.6.1.4.1.18.3.4.1.1.10ColumnwfCSMACDMadrread-onlymandatoryline MAC address, fixed - line driver fills in
1.3.6.1.4.1.18.3.4.1.1.11ColumnwfCSMACDOctetsRxOkread-onlymandatoryNumber of octets received without error
1.3.6.1.4.1.18.3.4.1.1.12ColumnwfCSMACDFramesRxOkread-onlymandatoryNumber of frames received without error
1.3.6.1.4.1.18.3.4.1.1.13ColumnwfCSMACDOctetsTxOkread-onlymandatoryNumber of octets transmitted without error
1.3.6.1.4.1.18.3.4.1.1.14ColumnwfCSMACDFramesTxOkread-onlymandatoryNumber of frames transmitted without error
1.3.6.1.4.1.18.3.4.1.1.15ColumnwfCSMACDDeferredTxread-onlymandatoryNumber of deferred transmissions
1.3.6.1.4.1.18.3.4.1.1.16ColumnwfCSMACDLateCollnTxread-onlymandatoryNumber of late collisions
1.3.6.1.4.1.18.3.4.1.1.17ColumnwfCSMACDExcessvCollnTxread-onlymandatoryNumber of excessive collisions
1.3.6.1.4.1.18.3.4.1.1.18ColumnwfCSMACDBablErrorTxread-onlymandatoryNumber of frames transmitted larger than the MTU size in wfCSMACDMtu
1.3.6.1.4.1.18.3.4.1.1.19ColumnwfCSMACDBufErrorTxread-onlymandatoryNumber of internal buffer errors
1.3.6.1.4.1.18.3.4.1.1.20ColumnwfCSMACDLcarTxread-onlymandatoryNumber of loss of carrier errors
1.3.6.1.4.1.18.3.4.1.1.21ColumnwfCSMACDUfloTxread-onlymandatoryNumber of transmitter underflow errors
1.3.6.1.4.1.18.3.4.1.1.22ColumnwfCSMACDFcsErrorRxread-onlymandatoryNumber of receiver checksum errors
1.3.6.1.4.1.18.3.4.1.1.23ColumnwfCSMACDAlignErrorRxread-onlymandatoryNumber of receiver alignment errors
1.3.6.1.4.1.18.3.4.1.1.24ColumnwfCSMACDLackRescErrorRxread-onlymandatoryNumber of receiver lack of resource errors
1.3.6.1.4.1.18.3.4.1.1.25ColumnwfCSMACDTooLongErrorRxread-onlymandatoryNumber of frames received exceeding the MTU size in wfCSMACDMtu.
1.3.6.1.4.1.18.3.4.1.1.26ColumnwfCSMACDOfloRxread-onlymandatoryNumber of receiver overflow errors
1.3.6.1.4.1.18.3.4.1.1.27ColumnwfCSMACDMerrread-onlymandatoryNumber of internal memory errors
1.3.6.1.4.1.18.3.4.1.1.28ColumnwfCSMACDCerrread-onlymandatoryNumber of collision errors
1.3.6.1.4.1.18.3.4.1.1.29ColumnwfCSMACDHardwareFilterread-writemandatoryHardware filtering parameter.
1.3.6.1.4.1.18.3.4.1.1.30ColumnwfCSMACDTxQueueLengthread-onlymandatoryCurrent Transmit Queue Length
1.3.6.1.4.1.18.3.4.1.1.31ColumnwfCSMACDRxQueueLengthread-onlymandatoryCurrent Receive Queue Length
1.3.6.1.4.1.18.3.4.1.1.32ColumnwfCSMACDTxClipFramesread-onlymandatoryNumber of frames clipped in driver's transmit routine due to transmit congestion.
1.3.6.1.4.1.18.3.4.1.1.33ColumnwfCSMACDRxReplenMissesread-onlymandatoryNumber of packet buffer misses while attempting to replenish driver receive ring.
1.3.6.1.4.1.18.3.4.1.1.34ColumnwfCSMACDCfgTxQueueLengthread-writemandatoryConfigured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based …
1.3.6.1.4.1.18.3.4.1.1.35ColumnwfCSMACDCfgRxQueueLengthread-writemandatoryConfigured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based d…
1.3.6.1.4.1.18.3.4.1.1.36ColumnwfCSMACDAlignmentModeread-writemandatoryEnables special frame re-alignment in the Line Driver. Only needed when 4 ethernet interfaces are configured on a single slot. Only needed if experiencing tran…
1.3.6.1.4.1.18.3.4.1.1.37ColumnwfCSMACDUnAlignedFramesread-onlymandatoryNumber of non-optimally aligned frames queued to the driver for transmit. This statistic does not indicate that any frames have been dropped. If the ethernet I…
1.3.6.1.4.1.18.3.4.1.1.38ColumnwfCSMACDLineNumberread-writemandatoryLogical line number associated with this driver entity.
1.3.6.1.4.1.18.3.4.1.1.39ColumnwfCSMACDLateCollnRxread-onlymandatoryNumber of late collisions - found in QUICC Ethernet Rx Buffer Descriptors
1.3.6.1.4.1.18.3.4.1.1.40ColumnwfCSMACDModuleread-onlymandatoryModule number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used.
1.3.6.1.4.1.18.3.4.1.1.41ColumnwfCSMACDActualConnectorread-onlymandatoryActual connector number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used.
1.3.6.1.4.1.18.3.4.1.1.42ColumnwfCSMACDLastChangeread-onlymandatoryThe value of SysUpTime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the time (in hundredths of a second…
1.3.6.1.4.1.18.3.4.1.1.43ColumnwfCSMACDOutQLenread-onlymandatoryThe instantaneous current length of the output packet queue (in packets).
1.3.6.1.4.1.18.3.4.1.1.44ColumnwfCSMACDIntProcessingsread-onlymandatorycounts the number of times the interrupt service routine has been called
1.3.6.1.4.1.18.3.4.1.1.45ColumnwfCSMACDTxProcessingsread-onlymandatoryCounts the number of times the transmit routine has been called
1.3.6.1.4.1.18.3.4.1.1.46ColumnwfCSMACDRxProcessingsread-onlymandatoryCounts the number of times RINT processing takes place in the interrupt service routine.
1.3.6.1.4.1.18.3.4.1.1.47ColumnwfCSMACDTxCmplProcessingsread-onlymandatoryCounts the number of times the transmit complete processing takes place
1.3.6.1.4.1.18.3.4.1.1.48ColumnwfCSMACDTxQueueReductionsread-onlymandatoryCounts the number of times the transmit queue has been shrinked in size due to the number of tx clips exceeding the treshold
1.3.6.1.4.1.18.3.4.1.1.49ColumnwfCSMACDSingleCollisionFramesread-onlymandatoryA count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision.
1.3.6.1.4.1.18.3.4.1.1.50ColumnwfCSMACDMultipleCollisionFramesread-onlymandatoryA count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision.
1.3.6.1.4.1.18.3.4.1.1.51ColumnwfCSMACDInternalMacTxErrorsread-onlymandatoryA count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance…
1.3.6.1.4.1.18.3.4.1.1.52ColumnwfCSMACDLineCapabilityread-onlymandatoryIf NWay is configured, this attribute contains a value that uniquely identifies the single capability that was agreed upon by the local and remote interfaces. …
1.3.6.1.4.1.18.3.4.1.1.53ColumnwfCSMACDEtherChipSetread-onlymandatoryThis object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. This object usually identifies the Medium Access Control …
1.3.6.1.4.1.18.3.4.1.1.54ColumnwfCSMACDRxSymbolErrorsread-onlymandatoryA count of frames received on a particular interface with one or more 100Mb symbol errors detected.
1.3.6.1.4.1.18.3.4.1.1.55ColumnwfCSMACDInternalMacRxErrorsread-onlymandatoryA count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of …
1.3.6.1.4.1.18.3.4.1.1.56ColumnwfCSMACDConfigurableSpeedread-onlymandatoryThis attribute will be enabled(1) if the interface supports different speed configurations. If configurable speeds are not supported on the interface, this att…
1.3.6.1.4.1.18.3.4.1.1.57ColumnwfCSMACDRxFlushesread-onlymandatoryThis attribute describes the number of times the hardware has entered a state which required a flush of the RX FIFO.
1.3.6.1.4.1.18.3.4.1.1.58ColumnwfCSMACDTxDeadlocksread-onlymandatoryThis attribute describes the number of times the hardware has entered a Tx Deadlock condition, and the software intervenes to free up the lock.
1.3.6.1.4.1.18.3.4.1.1.59ColumnwfCSMACDBoflRetriesread-writemandatorybofl retries, dflt = 5
1.3.6.1.4.1.18.3.4.1.1.60ColumnwfCSMACDBoflTmoDivisorread-writemandatorybofl tmo divisorr, dflt = 1
1.3.6.1.4.1.18.3.4.1.1.61ColumnwfCSMACDTurboBoflDebugread-writemandatorySpecial Turbo-BOFL debug mechanism to be used by Engineering and Manufacturing only. 31-24 : TMO - period of breath (amount of time between successive breaths …
1.3.6.1.4.1.18.3.4.1.1.62ColumnwfCSMACDIfIndexread-onlymandatoryIfTable Index for this line instance, filled in by driver. For the BAC it is not the same as the circuit number.
1.3.6.1.4.1.18.3.4.1.1.63ColumnwfCSMACDTxFlowControlPauseFramesread-onlymandatoryThis attribute indicates the number of Flow Control Pause frames transmitted.
1.3.6.1.4.1.18.3.4.1.1.64ColumnwfCSMACDRxFlowControlPauseFramesread-onlymandatoryThis attribute indicates the number of Flow Control Pause frames received.
1.3.6.1.4.1.18.3.4.1.1.65ColumnwfCSMACDRxUnsupportedOpcodesread-onlymandatoryThis attribute indicates the number of Control frames received that were not pause frames.
1.3.6.1.4.1.18.3.4.1.1.66ColumnwfCSMACDFlowControlEnableread-writemandatoryFlow control enable/disable parameter, dflt = enabled
1.3.6.1.4.1.18.3.4.1.1.67ColumnwfCSMACDTxFlowControlPauseTimeread-writemandatoryThis attribute indicates flow control pause time in slots.
1.3.6.1.4.1.18.3.4.1.1.68ColumnwfCSMACDTxFlowControlPauseZeroEnableread-writemandatoryTx Pause 0 frame generation enable/disable parameter, dflt = enabled.
1.3.6.1.4.1.18.3.4.1.1.69ColumnwfCSMACDDsqmsLineSpeedread-writemandatoryUser-selected line speed for DSQMS client
1.3.6.1.4.1.18.3.4.16.1TablewfCSMACDAutoNegTablenot-accessiblemandatoryCSMA/CD Auto Negotiation (NWay) record
1.3.6.1.4.1.18.3.4.16.1.1RowwfCSMACDAutoNegEntrynot-accessiblemandatoryAn entry in the csmacd table
1.3.6.1.4.1.18.3.4.16.1.1.1ColumnwfCSMACDAutoNegDeleteread-writemandatorycreate/delete parameter, dflt = created
1.3.6.1.4.1.18.3.4.16.1.1.2ColumnwfCSMACDAutoNegSlotread-onlymandatoryinstance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.16.1.1.3ColumnwfCSMACDAutoNegConnectorread-onlymandatoryinstance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined…
1.3.6.1.4.1.18.3.4.16.1.1.4ColumnwfCSMACDAutoNegSpeedSelectread-writemandatoryThis value indicates the configured speed of the local interface. This parameter allows configuration of a specific speed and duplex setting, or allows configu…
1.3.6.1.4.1.18.3.4.16.1.1.5ColumnwfCSMACDAutoNegRemoteSignalingread-onlymandatoryThis value indicates whether the remote end of the link is operating Auto Negotiation signaling or not. It shall take the value detected if, during the previou…
1.3.6.1.4.1.18.3.4.16.1.1.6ColumnwfCSMACDAutoNegStateread-onlymandatoryThis value indicates whether Auto Negotiation signaling is in progress or has completed. NOTE: This parameter is only valid if SpeedSelect is configured for NW…
1.3.6.1.4.1.18.3.4.16.1.1.7ColumnwfCSMACDAutoNegRestartAutoConfigread-writemandatoryWriting any value to this attribute forces Auto Negotiation to begin link re-negotiation. This action has no effect if Auto Negotiation signaling is disabled. …
1.3.6.1.4.1.18.3.4.16.1.1.8ColumnwfCSMACDAutoNegLocalCapabilityread-onlymandatoryThis is a GAUGE because this attribute is 32-bit unsigned, non-increasing A value that uniquely identifies the set of capabilities of the LOCAL Auto Negotiatio…
1.3.6.1.4.1.18.3.4.16.1.1.9ColumnwfCSMACDAutoNegAdvertisedCapabilityread-writemandatoryThis is a GAUGE because this attribute is 32-bit unsigned, non-increasing A successful set operation will result in immediate link re-negotiation if AutoNegAdm…
1.3.6.1.4.1.18.3.4.16.1.1.10ColumnwfCSMACDAutoNegReceivedCapabilityread-onlymandatoryThis is a GAUGE because this attribute is 32-bit unsigned, non-increasing A value that uniquely identifies the set of capabilities of the REMOTE Auto Negotiati…