Wellfleet-HARDWARE-MIB
66 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| Wellfleet-COMMON-MIB | wfHardwareConfig |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.1.1 | NodewfHwBase | |||
| 1.3.6.1.4.1.18.3.1.1.1 | ScalarwfHwBpIdOpt | read-only | mandatory | The BackPlane identification number. |
| 1.3.6.1.4.1.18.3.1.1.2 | ScalarwfHwBpRev | read-only | mandatory | The revision level of the BackPlane. High byte is in upper 2 bytes. |
| 1.3.6.1.4.1.18.3.1.1.3 | ScalarwfHwBpSerialNumber | read-only | mandatory | The serial number of the BackPlane. |
| 1.3.6.1.4.1.18.3.1.1.4 | ScalarwfBCNPwrSupply1 | read-only | mandatory | Status of BCN Hot-Swappable Power Supply 1 |
| 1.3.6.1.4.1.18.3.1.1.5 | ScalarwfBCNPwrSupply2 | read-only | mandatory | Status of BCN Hot-Swappable Power Supply 2 |
| 1.3.6.1.4.1.18.3.1.1.6 | ScalarwfBCNPwrSupply3 | read-only | mandatory | Status of BCN Hot-Swappable Power Supply 3 |
| 1.3.6.1.4.1.18.3.1.1.7 | ScalarwfBCNPwrSupply4 | read-only | mandatory | Status of BCN Hot-Swappable Power Supply 4 |
| 1.3.6.1.4.1.18.3.1.1.8 | ScalarwfBCNFanStatus | read-only | mandatory | Status of BCN Fan Tray |
| 1.3.6.1.4.1.18.3.1.1.9 | ScalarwfBCNTemperature | read-only | mandatory | Status of BCN Temperature sensor |
| 1.3.6.1.4.1.18.3.1.1.10 | ScalarwfBCNTemperature2 | read-only | mandatory | Status of second BCN Temperature sensor |
| 1.3.6.1.4.1.18.3.1.1.11 | ScalarwfFanSpeed | read-only | mandatory | This object indicates the current speed of the fan module |
| 1.3.6.1.4.1.18.3.1.2 | TablewfHwTable | not-accessible | mandatory | Hardware Table - indexed by slot number |
| 1.3.6.1.4.1.18.3.1.2.1 | RowwfHwEntry | not-accessible | mandatory | Hardware specific information about a slot. |
| 1.3.6.1.4.1.18.3.1.2.1.1 | ColumnwfHwSlot | read-only | mandatory | A unique value for each slot. Its value ranges between 1 and 14. There are products in this family that contain 1, 5, and 14 slots. |
| 1.3.6.1.4.1.18.3.1.2.1.2 | ColumnwfHwModIdOpt | read-only | mandatory | The module identification number. Port Configurations HWStat Name Enet Sync Async Token Framer Fiber 1 ENET-1 2 0 0 0 0 0 8 ENET-2 2 0 0 0 0 0 16 SYNC-1 0 4 1 … |
| 1.3.6.1.4.1.18.3.1.2.1.3 | ColumnwfHwModRev | read-only | mandatory | The revision level of the module. High byte is in upper 2 bytes. |
| 1.3.6.1.4.1.18.3.1.2.1.4 | ColumnwfHwModSerialNumber | read-only | mandatory | The serial number of the module. |
| 1.3.6.1.4.1.18.3.1.2.1.5 | ColumnwfHwMotherBdIdOpt | read-only | mandatory | The mother board identification number. |
| 1.3.6.1.4.1.18.3.1.2.1.6 | ColumnwfHwMotherBdRev | read-only | mandatory | The revision level of the mother board. High byte is in upper 2 bytes. |
| 1.3.6.1.4.1.18.3.1.2.1.7 | ColumnwfHwMotherBdSerialNumber | read-only | mandatory | The serial number of the mother board. |
| 1.3.6.1.4.1.18.3.1.2.1.8 | ColumnwfHwDaughterBdIdOpt | read-only | mandatory | The daughter board identification number. |
| 1.3.6.1.4.1.18.3.1.2.1.9 | ColumnwfHwDaughterBdRev | read-only | mandatory | The revision level of the daughter board. High byte is in upper 2 bytes. |
| 1.3.6.1.4.1.18.3.1.2.1.10 | ColumnwfHwDaughterBdSerialNumber | read-only | mandatory | The serial number of the daughter board. |
| 1.3.6.1.4.1.18.3.1.2.1.11 | ColumnwfHwBabyBdIdOpt | read-only | mandatory | The baby board identification number. |
| 1.3.6.1.4.1.18.3.1.2.1.12 | ColumnwfHwBabyBdRev | read-only | mandatory | The revision level of the baby board. High byte is in upper 2 bytes. |
| 1.3.6.1.4.1.18.3.1.2.1.13 | ColumnwfHwBabyBdSerialNumber | read-only | mandatory | The serial number of the baby board. |
| 1.3.6.1.4.1.18.3.1.2.1.14 | ColumnwfHwDiagPromRev | read-only | mandatory | The revision level of the Diagnostic PROM. Major revision level is in the upper 2 bytes, minor revision level in the lower 2 bytes. |
| 1.3.6.1.4.1.18.3.1.2.1.15 | ColumnwfHwDiagPromDate | read-only | mandatory | The creation date of the Diagnostic PROM |
| 1.3.6.1.4.1.18.3.1.2.1.16 | ColumnwfHwDiagPromSource | read-only | mandatory | The origin of the Diagnostic PROM contents |
| 1.3.6.1.4.1.18.3.1.2.1.17 | ColumnwfHwBootPromRev | read-only | mandatory | The revision level of the BOOT PROM. Major revision level is in the upper 2 bytes, minor revision level in the lower 2 bytes. |
| 1.3.6.1.4.1.18.3.1.2.1.18 | ColumnwfHwBootPromDate | read-only | mandatory | The creation date of the Boot PROM |
| 1.3.6.1.4.1.18.3.1.2.1.19 | ColumnwfHwBootPromSource | read-only | mandatory | The origin of the Boot PROM contents |
| 1.3.6.1.4.1.18.3.1.2.1.20 | ColumnwfHwSparePromRev | read-only | mandatory | The revision level of the BOOT PROM. Major revision level is in the upper 2 bytes, minor revision level in the lower 2 bytes. |
| 1.3.6.1.4.1.18.3.1.2.1.21 | ColumnwfHwSparePromDate | read-only | mandatory | The creation date of the Spare PROM |
| 1.3.6.1.4.1.18.3.1.2.1.22 | ColumnwfHwSparePromSource | read-only | mandatory | The origin of the Spare PROM contents |
| 1.3.6.1.4.1.18.3.1.2.1.23 | ColumnwfHwFileSysPresent | read-only | mandatory | Flag indicating presence of File System on this slot. |
| 1.3.6.1.4.1.18.3.1.2.1.24 | ColumnwfHwFileSysPresent2 | read-only | mandatory | Flag indicating presence of File System (Syscon2 volume#2) on this slot. |
| 1.3.6.1.4.1.18.3.1.2.1.25 | ColumnwfHwConfigServer | read-only | mandatory | The slot number from which this slot was served its configuration. If the value for this attribute is 0, this slot obtained its configuration from a file syste… |
| 1.3.6.1.4.1.18.3.1.2.1.26 | ColumnwfHwConfigFile | read-only | mandatory | The name of the config file the active configuration was derived from. This does NOT necessarily reflect the current configuration! |
| 1.3.6.1.4.1.18.3.1.2.1.27 | ColumnwfHwConfigDateAndTime | read-only | mandatory | The 11 octet date and time that a configuration was loaded on/served to this slot. Octet map: 1-2 Year, 3 Month, 4 Day, 5 Hour, 6 Minutes, 7 Seconds, 8 Deci-se… |
| 1.3.6.1.4.1.18.3.1.2.1.28 | ColumnwfHwActiveImageName | read-only | mandatory | If slot was booted from a local source: this is the name of the active image, which is in the form of <volume>:<image name>. If slot was booted from a network … |
| 1.3.6.1.4.1.18.3.1.2.1.29 | ColumnwfHwActiveImageSource | read-only | mandatory | The origin of the active image |
| 1.3.6.1.4.1.18.3.1.2.1.30 | ColumnwfHwActiveImageDate | read-only | mandatory | The date which the active image was created |
| 1.3.6.1.4.1.18.3.1.2.1.31 | ColumnwfHwMotherBdMemorySize | read-only | mandatory | The total installed dram size in kilobytes. |
| 1.3.6.1.4.1.18.3.1.2.1.32 | ColumnwfHwFastPacketCacheSize | read-only | mandatory | The size of the installed fast packet cache in kilobytes. |
| 1.3.6.1.4.1.18.3.1.2.1.33 | ColumnwfHwModDaughterBd1IdOpt | read-only | mandatory | Link module daughter board #1 identification number |
| 1.3.6.1.4.1.18.3.1.2.1.34 | ColumnwfHwModDaughterBd1AwRev | read-only | mandatory | Link module daughter board #1 artwork revision level |
| 1.3.6.1.4.1.18.3.1.2.1.35 | ColumnwfHwModDaughterBd1Rev | read-only | mandatory | Link module daughter board #1 board revision level |
| 1.3.6.1.4.1.18.3.1.2.1.36 | ColumnwfHwModDaughterBd1SerialNumber | read-only | mandatory | Link module daughter board #1 serial number |
| 1.3.6.1.4.1.18.3.1.2.1.37 | ColumnwfHwModDaughterBd2IdOpt | read-only | mandatory | Link module daughter board #2 identification number |
| 1.3.6.1.4.1.18.3.1.2.1.38 | ColumnwfHwModDaughterBd2AwRev | read-only | mandatory | Link module daughter board #2 artwork revision level |
| 1.3.6.1.4.1.18.3.1.2.1.39 | ColumnwfHwModDaughterBd2Rev | read-only | mandatory | Link module daughter board #2 board revision level |
| 1.3.6.1.4.1.18.3.1.2.1.40 | ColumnwfHwModDaughterBd2SerialNumber | read-only | mandatory | Link module daughter board #2 serial number |
| 1.3.6.1.4.1.18.3.1.2.1.41 | ColumnwfRASNPwrSupply1 | read-only | mandatory | Status of RASN Internal Power Supply PS1 |
| 1.3.6.1.4.1.18.3.1.2.1.42 | ColumnwfRASNPwrSupply2 | read-only | mandatory | Status of RASN External Power Supply PS2 |
| 1.3.6.1.4.1.18.3.1.2.1.43 | ColumnwfPowerSupply1 | read-only | mandatory | Status of Power Supply 1. The meaning of this object is platform dependent. It is normally used to report the status of the internal power supply. Not all plat… |
| 1.3.6.1.4.1.18.3.1.2.1.44 | ColumnwfPowerSupply2 | read-only | mandatory | Status of Power Supply 1. The meaning of this object is platform dependent. It is normally used to report the status of the external power supply. Not all plat… |
| 1.3.6.1.4.1.18.3.1.2.1.45 | ColumnwfFanStatus1 | read-only | mandatory | Status of Fan 1. The meaning of this object is platform dependent. Not all platforms support this object. |
| 1.3.6.1.4.1.18.3.1.2.1.46 | ColumnwfFanStatus2 | read-only | mandatory | Status of Fan 2. The meaning of this object is platform dependent. Not all platforms support this object. |
| 1.3.6.1.4.1.18.3.1.2.1.47 | ColumnwfRASNRPSUPresent | read-write | obsolete | Status of RASN External Power Supply PS2 Presence |
| 1.3.6.1.4.1.18.3.1.2.1.48 | ColumnwfModDiagStatus | read-only | mandatory | For TIB, BF and BAR builds only. Module Diag. status determines if diags have been run on a netmodule, and if they passed or failed. |
| 1.3.6.1.4.1.18.3.1.7 | TablewfHwCfgTable | not-accessible | mandatory | Hardware Config Table - indexed by slot number |
| 1.3.6.1.4.1.18.3.1.7.1 | RowwfHwCfgEntry | not-accessible | mandatory | Hardware specific information about a slot. |
| 1.3.6.1.4.1.18.3.1.7.1.1 | ColumnwfHwCfgSlot | read-only | mandatory | A unique value for each slot. |
| 1.3.6.1.4.1.18.3.1.7.1.2 | ColumnwfRPSUPresent | read-write | mandatory | Status of External Power Supply PS2 Presence |