Wellfleet-OSPF-MIB
208 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress |
| RFC1213-MIB | DisplayString |
| Wellfleet-COMMON-MIB | wfOspfGroup |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.3.1 | NodewfOspfGeneralGroup | |||
| 1.3.6.1.4.1.18.3.5.3.2.3.1.1 | ScalarwfOspfGeneralDelete | read-write | mandatory | 'This value determines whether OSPF is configured' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.2 | ScalarwfOspfGeneralDisable | read-write | mandatory | 'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.3 | ScalarwfOspfGeneralState | read-only | mandatory | 'The state of OSPF' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.4 | ScalarwfOspfRouterId | read-write | mandatory | 'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.5 | ScalarwfOspfVersionNumber | read-only | mandatory | 'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.6 | ScalarwfOspfAreaBdrRtrStatus | read-only | mandatory | 'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.7 | ScalarwfOspfASBdrRtrStatus | read-write | mandatory | 'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification of routers' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.8 | ScalarwfOspfTOSSupport | read-only | mandatory | 'The router's support for type-of-service routing.' REFERENCE 'OSPF Version 2, Appendix F.1.2 Optional TOS support' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.9 | ScalarwfOspfSpfHoldDown | read-write | mandatory | Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.10 | ScalarwfOspfSlotMask | read-write | mandatory | Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.11 | ScalarwfOspfNewAseMetricSupport | read-write | mandatory | A parameter to specify if the new style ASE metric support is enabled. The new metric is not compatible with the pre-8.0 ASE metrics. The new metric support sh… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.12 | ScalarwfOspfBackupDisable | read-only | mandatory | This parameter enables or disables the backup OSPF soloist's backup link state database. When the parameter is set to disabled the OSPF backup soloist will not… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.13 | ScalarwfOspfPrimaryLogMask | read-write | mandatory | A parameter to specify which OSPF log messages should be logged. This will only effect the Primary OSPF gate. Each bit represents a message as defined below. A… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.14 | ScalarwfOspfBackupLogMask | read-only | mandatory | A parameter to specify which OSPF log messages should be logged. This will only effect the Backup OSPF gate. Each bit represents a message as defined below. A … |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.15 | ScalarwfOspfAseTagDefault | read-write | mandatory | This parameter indicates how ASE tags will be generated for those ASEs whose tags are not altered by an export route filter or announce route policy. default(1… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.16 | ScalarwfOspfPrimarySlot | read-only | mandatory | Slot on which OSPF Primary is running. Slots can be 1-14. Default is zero. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.17 | ScalarwfOspfBackupSlot | read-only | mandatory | Slot on which OSPF Backup is running. Slots can be 1-14. Default is zero. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.18 | ScalarwfOspfMaximumPath | read-write | obsolete | Maximum number of equal cost paths allowed for a network installed by OSPF. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.19 | ScalarwfOspfSlotPriority | read-write | mandatory | Comma-separated list of slots specifying the order in which slots should attempt to bring up OSPF soloist. They are listed in the decreasing order of priority.… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.20 | ScalarwfOspfLsdbCount | read-only | mandatory | Running count of LSDB entries |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.21 | ScalarwfOspfMulticastExtensions | read-write | mandatory | A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. … |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.22 | ScalarwfOspfMulticastDeterministic | read-write | mandatory | This controls whether or not the deterministic variation of the MOSPF Dijkstra is run or not |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.23 | ScalarwfOspfMulticastRoutePinning | read-write | mandatory | This controls whether or not the route pinning variation of the MOSPF Dijkstra is run or not |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.24 | ScalarwfOspfOpaqueCapability | read-write | mandatory | This controls whether or not the router will accept and process OPAQUE LSAs |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.25 | ScalarwfOspfDeterministicMcastHoldDown | read-write | mandatory | This controls whether or not the Hold Down feature for the Deterministic MOSPF is enabled. If it is enabled, a data flow does not go out of an interface even i… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.26 | ScalarwfMospfEntryTimeoutValue | read-write | mandatory | The timer value for timing out MOSPF forward entries. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.27 | ScalarwfOspfMaxQueuedMcastPkts | read-write | mandatory | This controls how many mcast packets can be queued on each slot for all flows before the building of mcast trees finishes. If it is not 0, the first a few data… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.28 | ScalarwfOspfMcastUseDynTTL | read-write | mandatory | This controls whether dynamic TTL threshold is used. Data forwarding is a little bit faster when it is NOT used. Dynamic TTL means the TTL threshold may be dif… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.29 | ScalarwfOspfRfc1583Compatibility | read-write | mandatory | Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules … |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.30 | ScalarwfOspfASEMcastEnable | read-write | mandatory | This attribute indicates whether AS External routes are multicast capable. If enabled, the advertising ASBR sets the MC-bit in the ASE-LSAs for those routes, s… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.31 | ScalarwfOspfNssaBorderRouter | read-only | mandatory | `A flag to note whether this router NSSA border router' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.32 | ScalarwfOspfLsaRefreshMax | read-write | mandatory | `Maximum number of consecutive refreshes of self-originated Summary and External LSAs before applying a configured delay. A value of zero implies that there is… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.33 | ScalarwfOspfLsaRefreshDelay | read-write | mandatory | `Delay to apply between the maximum number of consecutive refreshes of self-originated Summary and External LSAs if a non-zero maximum is configured. The unit … |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.34 | ScalarwfOspfAggrUseMaxCost | read-write | mandatory | When area range is configured, sum net lsa is generated depends on this mib attribute: enabled: Use Max Metric to aggregate networks. See RFC2328 3.5 IP subnet… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.35 | ScalarwfOspfFwdAddrComp | read-write | mandatory | When enabled allows OSPF to comply with RFC1583 with respect to forwarding address changes. When disabled OSPF remains compatiable with pre-14.00rev1D code. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.36 | ScalarwfOspfMtuUseCommonDefault | read-write | mandatory | when this parameter is enabled, OSPF will use the MTU size of ethernet, that is, 1500 in all the interfaces regardless of what IP passes onto OSPF if the wfOsp… |
| 1.3.6.1.4.1.18.3.5.3.2.3.2 | TablewfOspfAreaTable | not-accessible | mandatory | 'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'OSPF Version 2, Section 6 The Area Data… |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1 | RowwfOspfAreaEntry | not-accessible | mandatory | 'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.1 | ColumnwfOspfAreaDelete | read-write | mandatory | This value determines if the OSPF router is configured with this area. |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.2 | ColumnwfOspfAreaDisable | read-write | mandatory | This value indicates the state of this area on the OSPF router. |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.3 | ColumnwfOspfAreaState | read-only | mandatory | This value indicates the state of the OSPF Area. |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.4 | ColumnwfOspfAreaId | read-only | mandatory | 'A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.5 | ColumnwfOspfAuthType | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.6 | ColumnwfOspfImportASExtern | read-write | mandatory | 'The area's support for importing AS external link- state advertisements.' REFERENCE `OSPF NSSA Internet Draft, Appendix D: Configuration Parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.7 | ColumnwfOspfStubMetric | read-write | mandatory | 'The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas… |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.8 | ColumnwfOspfImportSum | read-write | mandatory | 'The area's support for importing Summary advertisements into a stub area. This variable should not be set unless wfOspfImportASExtern is set to FALSE' |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.9 | ColumnwfOspfSpfCnt | read-only | mandatory | The number of times the OSPF SPF algorithm has been run for this area. |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.10 | ColumnwfOspfPtpSpecCostEnable | read-write | mandatory | This value indicates the formula used to calculate the cost for point to point links. |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.11 | ColumnwfOspfAreaNssaTranslateCfg | read-write | mandatory | `Indicates whether or not an NSSA Border routes is configured to performing NSSA translation of type-7 LSAs into type-5 LSAs.' REFERENCE `OSPF NSSA Internet Dr… |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.12 | ColumnwfOspfAreaNssaTranslateStatus | read-only | mandatory | `Indicates whether or not an NSSA Border routes is performing NSSA translation of type-7 LSAs into type-5 LSAs.' REFERENCE `OSPF NSSA Internet Draft, Appendix … |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.13 | ColumnwfOspfAreaNssaOriginateDefaultRoute | read-write | mandatory | `whether or not an Type-7 default is originated by the ASBR' |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.14 | ColumnwfOspfAreaNssaPropagateDefaultRoute | read-write | mandatory | `Indicates whether or not the Type-7 default route LSA will have the propagate bit (P-bit) set. If the P-bit is set, the Type-7 default route LSA is translated… |
| 1.3.6.1.4.1.18.3.5.3.2.3.2.1.15 | ColumnwfOspfAreaNssaDefaultRoutePathType | read-write | mandatory | `The path type applied to the type-7 default route' REFERENCE `OSPF NSSA Internet Draft, Appendix D: Configuration Parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3 | TablewfOspfLsdbTable | not-accessible | mandatory | 'The OSPF Process's Links State Database.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1 | RowwfOspfLsdbEntry | not-accessible | mandatory | 'A single Link State Advertisement.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.1 | ColumnwfOspfLsdbAreaId | read-only | mandatory | 'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.2 | ColumnwfOspfLsdbType | read-only | mandatory | 'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State … |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.3 | ColumnwfOspfLsdbLSID | read-only | mandatory | 'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being des… |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.4 | ColumnwfOspfLsdbRouterId | read-only | mandatory | 'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.5 | ColumnwfOspfLsdbSequence | read-only | mandatory | 'The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linea… |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.6 | ColumnwfOspfLsdbAge | read-only | mandatory | 'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.7 | ColumnwfOspfLsdbChecksum | read-only | mandatory | 'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age ca… |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.8 | ColumnwfOspfLsdbMetric | read-only | mandatory | 'Metric from LSA, if applicable.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.9 | ColumnwfOspfLsdbAseForwardAddr | read-only | mandatory | 'If an ASE, the forwarding address from the LSA.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.10 | ColumnwfOspfLsdbAseTag | read-only | mandatory | 'If an ASE, the External Route Tag from the LSA.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.11 | ColumnwfOspfLsdbAseType | read-only | mandatory | 'If an ASE, the external metric type from the LSA.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.12 | ColumnwfOspfLsdbAdvLen | read-only | mandatory | 'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' |
| 1.3.6.1.4.1.18.3.5.3.2.3.3.1.13 | ColumnwfOspfLsdbAdv | read-only | mandatory | 'This field is the actual OSPF advertisement in hexadecimal format' |
| 1.3.6.1.4.1.18.3.5.3.2.3.4 | TablewfOspfAreaRangeTable | not-accessible | mandatory | 'A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 incl… |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1 | RowwfOspfAreaRangeEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.1 | ColumnwfOspfAreaRangeDelete | read-write | mandatory | This value determines if an Area Range has been configured for the OSPF router. |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.2 | ColumnwfOspfAreaRangeDisable | read-write | mandatory | 'This variable displays the status of the entry. Setting it to 'DISBALED' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.3 | ColumnwfOspfAreaRangeState | read-only | mandatory | The state of the OSPF Area Range. |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.4 | ColumnwfOspfAreaRangeAreaID | read-only | mandatory | 'The Area the Address Range is to be found within.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.5 | ColumnwfOspfAreaRangeNet | read-only | mandatory | 'The IP Address of the Net or Subnet indicated by the range.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.6 | ColumnwfOspfAreaRangeMask | read-write | mandatory | 'The Subnet Mask that pertains to the Net or Subnet.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.7 | ColumnwfOspfAreaRangeStatus | read-write | mandatory | 'Set to either Advertise or DoNotAdvertise. Routing information is condensed at area boundaries. External to the area, at most a single route is advertised for… |
| 1.3.6.1.4.1.18.3.5.3.2.3.4.1.8 | ColumnwfOspfAreaRangeMetric | read-write | mandatory | 'The metric to advertise into other areas as the distance from the OSPF router to any network in the range. The default of 0 means to use the value calculated … |
| 1.3.6.1.4.1.18.3.5.3.2.3.5 | TablewfOspfIfTable | not-accessible | mandatory | 'The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.' REFERENCE 'OSPF Version 2, Appendix C.3 Router interface parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1 | RowwfOspfIfEntry | not-accessible | mandatory | 'The OSPF Interface Entry describes one interface from the viewpoint of OSPF.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.1 | ColumnwfOspfIfDelete | read-write | mandatory | This variable determines in an OSPF Interface has been configured on the router. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.2 | ColumnwfOspfIfDisable | read-write | mandatory | 'The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be … |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.3 | ColumnwfOspfIfState | read-only | mandatory | 'The OSPF Interface State.' down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7) |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.4 | ColumnwfOspfIfIpAddress | read-only | mandatory | 'The IP address of this OSPF interface.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.5 | ColumnwfOspfAddressLessIf | read-only | mandatory | 'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the cor… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.6 | ColumnwfOspfIfAreaId | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.7 | ColumnwfOspfIfType | read-write | mandatory | 'The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.8 | ColumnwfOspfIfRtrPriority | read-write | mandatory | 'The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the … |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.9 | ColumnwfOspfIfTransitDelay | read-write | mandatory | 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.10 | ColumnwfOspfIfRetransInterval | read-write | mandatory | 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitti… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.11 | ColumnwfOspfIfHelloInterval | read-write | mandatory | 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a co… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.12 | ColumnwfOspfIfRtrDeadInterval | read-write | mandatory | 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hell… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.13 | ColumnwfOspfIfPollInterval | read-write | mandatory | 'The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.14 | ColumnwfOspfIfDesignatedRouter | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.15 | ColumnwfOspfIfBackupDesignatedRouter | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.16 | ColumnwfOspfIfMetricCost | read-write | mandatory | 'The cost of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.17 | ColumnwfOspfIfAuthKey | read-write | mandatory | 'The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero f… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.18 | ColumnwfOspfIfTxHellos | read-only | mandatory | Number of OSPF Hello packets transmitted. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.19 | ColumnwfOspfIfTxDBDescripts | read-only | mandatory | Number of OSPF DataBase Description packets transmitted. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.20 | ColumnwfOspfIfTxLinkStateReqs | read-only | mandatory | Number of OSPF Link State Request packets transmitted. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.21 | ColumnwfOspfIfTxLinkStateUpds | read-only | mandatory | Number of OSPF Link State Update packets transmitted. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.22 | ColumnwfOspfIfTxLinkStateAcks | read-only | mandatory | Number of OSPF Link States Acknowledgements transmitted. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.23 | ColumnwfOspfIfRxHellos | read-only | mandatory | Number of OSPF Hello packets received. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.24 | ColumnwfOspfIfRxDBDescripts | read-only | mandatory | Number of OSPF DataBase Description packets received. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.25 | ColumnwfOspfIfRxLinkStateReqs | read-only | mandatory | Number of OSPF Link State Requests received. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.26 | ColumnwfOspfIfRxLinkStateUpds | read-only | mandatory | Number of OSPF Link State Updates received. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.27 | ColumnwfOspfIfRxLinkStateAcks | read-only | mandatory | Number of OSPF Link State Acknowledgements received. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.28 | ColumnwfOspfIfDrops | read-only | mandatory | Number of OSPF packets dropped because of invalid information in the packet. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.29 | ColumnwfOspfMtuSize | read-write | mandatory | Configure MTU size per OSPF interface This parameter has the following values/meanings: 1 - Use the MTU specified by IP 2 - Use the MTU of ethernet, regardless… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.30 | ColumnwfOspfIfMulticastForwarding | read-write | mandatory | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.31 | ColumnwfOspfIfOpaqueOn | read-write | mandatory | This controls whether or not OPAQUE LSAs are to be flooded out this interface or not. |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.32 | ColumnwfOspfIfBwRate | read-only | mandatory | Available BW (token bucket rate) on the intf |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.33 | ColumnwfOspfIfBwDepth | read-only | mandatory | Available BW (token bucket depth) on the intf |
| 1.3.6.1.4.1.18.3.5.3.2.3.5.1.34 | ColumnwfOspfIfMtuMismatchDetect | read-write | mandatory | Controls the interpretation of the MTU field in the database description packet header. Per RFC 2178 the MTU indicates the largest size IP packet that an OSPF … |
| 1.3.6.1.4.1.18.3.5.3.2.3.6 | TablewfOspfVirtIfTable | not-accessible | mandatory | 'Information about this router's virtual interfaces.' REFERENCE 'OSPF Version 2, Appendix C.4 Virtual link parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1 | RowwfOspfVirtIfEntry | not-accessible | mandatory | 'Information about a single Virtual Interface.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.1 | ColumnwfOspfVirtIfDelete | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.2 | ColumnwfOspfVirtIfDisable | read-write | mandatory | 'This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row r… |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.3 | ColumnwfOspfVirtIfState | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.4 | ColumnwfOspfVirtIfAreaID | read-only | mandatory | 'The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0' |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.5 | ColumnwfOspfVirtIfNeighbor | read-only | mandatory | 'The Router ID of the Virtual Neighbor.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.6 | ColumnwfOspfVirtIfTransitDelay | read-write | mandatory | 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.7 | ColumnwfOspfVirtIfRetransInterval | read-write | mandatory | 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitti… |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.8 | ColumnwfOspfVirtIfHelloInterval | read-write | mandatory | 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.9 | ColumnwfOspfVirtIfRtrDeadInterval | read-write | mandatory | 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hell… |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.10 | ColumnwfOspfVirtIfAuthKey | read-write | mandatory | 'If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length z… |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.11 | ColumnwfOspfVirtIfTxHellos | read-only | mandatory | Number of OSPF Hello packets transmitted on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.12 | ColumnwfOspfVirtIfTxDBDescripts | read-only | mandatory | Number of OSPF DataBase Description packets transmitted on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.13 | ColumnwfOspfVirtIfTxLinkStateReqs | read-only | mandatory | Number of OSPF Link State Request packets transmitted on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.14 | ColumnwfOspfVirtIfTxLinkStateUpds | read-only | mandatory | Number of OSPF Link State Update packets transmitted on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.15 | ColumnwfOspfVirtIfTxLinkStateAcks | read-only | mandatory | Number of OSPF Link State Acknowledgement packets transmitted on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.16 | ColumnwfOspfVirtIfRxHellos | read-only | mandatory | Number of OSPF Hello packets received on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.17 | ColumnwfOspfVirtIfRxDBDescripts | read-only | mandatory | Number of OSPF DataBase Description packets received on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.18 | ColumnwfOspfVirtIfRxLinkStateReqs | read-only | mandatory | Number of OSPF Link State Request packets recieved on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.19 | ColumnwfOspfVirtIfRxLinkStateUpds | read-only | mandatory | Number of OSPF Link State Update packets received on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.20 | ColumnwfOspfVirtIfRxLinkStateAcks | read-only | mandatory | Number of OSPF Link State Acknowledgement packets received on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.6.1.21 | ColumnwfOspfVirtIfDrops | read-only | mandatory | Number of OSPF packets dropped on Virtual Interfaces. |
| 1.3.6.1.4.1.18.3.5.3.2.3.7 | TablewfOspfNbrTable | not-accessible | mandatory | 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1 | RowwfOspfNbrEntry | not-accessible | mandatory | 'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.1 | ColumnwfOspfNbrDelete | read-write | mandatory | This variable indicates the existence of a static OSPF neighbor. |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.2 | ColumnwfOspfNbrDisable | read-write | mandatory | 'This variable displays the status of the entry. Setting it to 'DISABLED' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.3 | ColumnwfOspfNbrState | read-only | mandatory | 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), excha… |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.4 | ColumnwfOspfNbrIpAddr | read-only | mandatory | 'The IP address of this neighbor.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.5 | ColumnwfOspfNbrIfAddr | read-write | mandatory | 'The Interface IP address for this neighbor.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.6 | ColumnwfOspfNbrAddressLessIndex | read-only | mandatory | ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this… |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.7 | ColumnwfOspfNbrRtrId | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.8 | ColumnwfOspfNbrOptions | read-only | mandatory | 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is … |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.9 | ColumnwfOspfNbrPriority | read-write | mandatory | 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated ro… |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.10 | ColumnwfOspfNbrEvents | read-only | mandatory | 'The number of times this neighbor relationship has changed state, or an error has occurred.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.11 | ColumnwfOspfNbrLSRetransQLen | read-only | mandatory | 'The current length of the retransmission queue.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.7.1.12 | ColumnwfOspfCurNbrPriority | read-only | mandatory | This value represents the priority of the neighbor as indicated in received Hello packets. In most cases, this will be the same as wfOspfCfgNbrPriority. If the… |
| 1.3.6.1.4.1.18.3.5.3.2.3.8 | TablewfOspfVirtNbrTable | not-accessible | mandatory | 'A table of virtual neighbor information.' REFERENCE 'OSPF Version 2, ' |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1 | RowwfOspfVirtNbrEntry | not-accessible | mandatory | 'Virtual neighbor information.' REFERENCE 'OSPF Version 2, ' |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1.1 | ColumnwfOspfVirtNbrArea | read-only | mandatory | 'The Transit Area Identifier.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1.2 | ColumnwfOspfVirtNbrRtrId | read-only | mandatory | 'A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1.3 | ColumnwfOspfVirtNbrIpAddr | read-only | mandatory | 'The IP address this Virtual Neighbor is using.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1.4 | ColumnwfOspfVirtNbrOptions | read-only | mandatory | 'A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metric… |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1.5 | ColumnwfOspfVirtNbrState | read-only | mandatory | 'The state of the Virtual Neighbor Relationship.' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1.6 | ColumnwfOspfVirtNbrEvents | read-only | mandatory | 'The number of times this virtual link has changed its state, or an error has occurred.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.8.1.7 | ColumnwfOspfVirtNbrLSRetransQLen | read-only | mandatory | 'The current length of the retransmission queue.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.9 | TablewfOspfDynNbrTable | not-accessible | mandatory | 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1 | RowwfOspfDynNbrEntry | not-accessible | mandatory | 'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.1 | ColumnwfOspfDynNbrState | read-only | mandatory | 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), excha… |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.2 | ColumnwfOspfDynNbrIpAddr | read-only | mandatory | 'The IP address of this neighbor.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.3 | ColumnwfOspfDynNbrIfAddr | read-only | mandatory | 'The Interface IP address for this neighbor.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.4 | ColumnwfOspfDynNbrAddressLessIndex | read-only | mandatory | ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this… |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.5 | ColumnwfOspfDynNbrRtrId | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.6 | ColumnwfOspfDynNbrOptions | read-only | mandatory | 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is … |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.7 | ColumnwfOspfDynNbrPriority | read-only | mandatory | 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated ro… |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.8 | ColumnwfOspfDynNbrEvents | read-only | mandatory | 'The number of times this neighbor relationship has changed state, or an error has occurred.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.9.1.9 | ColumnwfOspfDynNbrLSRetransQLen | read-only | mandatory | 'The current length of the retransmission queue.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10 | TablewfOspfBackupLsdbTable | not-accessible | mandatory | 'The OSPF Process's Links State Database.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1 | RowwfOspfBackupLsdbEntry | not-accessible | mandatory | 'A single Link State Advertisement.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.1 | ColumnwfOspfBackupLsdbAreaId | read-only | mandatory | 'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.2 | ColumnwfOspfBackupLsdbType | read-only | mandatory | 'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State … |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.3 | ColumnwfOspfBackupLsdbLSID | read-only | mandatory | 'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being des… |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.4 | ColumnwfOspfBackupLsdbRouterId | read-only | mandatory | 'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.5 | ColumnwfOspfBackupLsdbSequence | read-only | mandatory | 'The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linea… |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.6 | ColumnwfOspfBackupLsdbAge | read-only | mandatory | 'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.7 | ColumnwfOspfBackupLsdbChecksum | read-only | mandatory | 'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age ca… |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.8 | ColumnwfOspfBackupLsdbMetric | read-only | mandatory | 'Metric from LSA, if applicable.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.9 | ColumnwfOspfBackupLsdbAseForwardAddr | read-only | mandatory | 'If an ASE, the forwarding address from the LSA.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.10 | ColumnwfOspfBackupLsdbAseTag | read-only | mandatory | 'If an ASE, the External Route Tag from the LSA.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.11 | ColumnwfOspfBackupLsdbAseType | read-only | mandatory | 'If an ASE, the external metric type from the LSA.' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.12 | ColumnwfOspfBackupLsdbAdvLen | read-only | mandatory | 'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' |
| 1.3.6.1.4.1.18.3.5.3.2.3.10.1.13 | ColumnwfOspfBackupLsdbAdv | read-only | mandatory | 'This field is the actual OSPF advertisement in hexadecimal format' |
| 1.3.6.1.4.1.18.3.5.3.2.3.11 | TablewfMospfForwardTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1 | RowwfMospfForwardEntry | not-accessible | mandatory | A forwarding entry |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.1 | ColumnwfMospfForwardSource | read-only | mandatory | The source IP address of this entry. It could be either a host, or a network, depending upon the value of wfMospfForwardSourceMask |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.2 | ColumnwfMospfForwardGroup | read-only | mandatory | The destinatino group address of this entry |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.3 | ColumnwfMospfForwardSourceMask | read-only | mandatory | The mask for the source of this entry. |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.4 | ColumnwfMospfForwardSourceNetMask | read-only | mandatory | The mask for the network that the source is on. |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.5 | ColumnwfMospfForwardFlag | read-only | mandatory | Flags associated with the entry. 0x10000000 (re)calculation of the entry not done yet 0x00000001 the entry is associated with a RSVP session |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.6 | ColumnwfMospfForwardUpstreamAddress | read-only | mandatory | The IP address of the upstream intf for the entry. |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.7 | ColumnwfMospfForwardUpstreamIfIndex | read-only | mandatory | The circuit number of the upstream intf for the entry. |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.8 | ColumnwfMospfForwardBwBucketDepth | read-only | mandatory | Depth parameter of the flow spec for the entry |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.9 | ColumnwfMospfForwardBwBucketRate | read-only | mandatory | Rate parameter of the flow spec for the entry |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.10 | ColumnwfMospfForwardAge | read-only | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. |
| 1.3.6.1.4.1.18.3.5.3.2.3.11.1.11 | ColumnwfMospfForwardDownstream | read-only | mandatory | list of downstream intfs for this entry. Each one is in the format of (intf_addr (u_int32), intf_cct (u_int16), ttl (u_int16)) |
| 1.3.6.1.4.1.18.3.5.3.2.3.12 | TablewfOspfNSSARangeTable | not-accessible | mandatory | REFERENCE 'OSPF Internet Draft, Section 3.2 Type-7 Address Range' |
| 1.3.6.1.4.1.18.3.5.3.2.3.12.1 | RowwfOspfNSSARangeEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.3.12.1.1 | ColumnwfOspfNSSARangeDelete | read-write | mandatory | This value determines if an type-7 Range has been configured for the OSPF NSSA border router . |
| 1.3.6.1.4.1.18.3.5.3.2.3.12.1.2 | ColumnwfOspfNSSARangeDisable | read-write | mandatory | `This variable displays the status of the entry. Setting it to `DISBALED' has the effect of rendering it inoperative. ' |
| 1.3.6.1.4.1.18.3.5.3.2.3.12.1.3 | ColumnwfOspfNSSARangeNet | read-only | mandatory | `The IP Address of the Net or Subnet indicated by the range.' REFERENCE `OSPF NSSA Internet Draft, 3.2 type-7 address range' |
| 1.3.6.1.4.1.18.3.5.3.2.3.12.1.4 | ColumnwfOspfNSSARangeMask | read-write | mandatory | `The Subnet Mask that pertains to the Net or Subnet.' REFERENCE `OSPF NSSA Internet Draft, 3.2 type-7 address range' |
| 1.3.6.1.4.1.18.3.5.3.2.3.12.1.5 | ColumnwfOspfNSSARangeStatus | read-write | mandatory | `Set to either Advertise or DoNotAdvertise. Routing information is condensed at area boundaries. External to the area, at most a single route is advertised for… |
| 1.3.6.1.4.1.18.3.5.3.2.3.12.1.6 | ColumnwfOspfNSSARangeExternRouteTag | read-write | mandatory | `External route tag. This value is used in the aggregated type-5 LSA' REFERENCE `OSPF NSSA Internet Draft, 3.2 type-7 address range' |