XEROX-JOB-MONITORING-TC
12 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | 2578 TEXTUAL-CONVENTION |
| XEROX-COMMON-MIB | 2579 xeroxCommonMIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| XcmJMDocFileNameType | INTEGER { other(1), unknown(2), fntAutomatic(3), fntX500(4), fntXFN(5), fntDCE(6), fntCDS(7), fntNIS(8), fntDNS(9), fntDECNS(10), fntInternetMail(11), fntXNS(12), fntBindery(13), fntNDS(14), fntURL(15), fntPOSIX(23), fntUNIX(24), fntOS2(25), fntPCDOS(26), fntNT(27), fntMVS(28), fntVM(29), fntOS400(30), fntVMS(31), fntUNC(32), fntNetWare(33) } | current | The type of file name syntax from which a document is obtained for an output job, such as print, or for which a document is produced for an input job, such as scan- to-file. The file name syntax types are taken from ISO… |
| XcmJMDocOutputMethod | INTEGER(0..65535) | current | This object is bit coded, so that multiple document output requests may be made for the document. Each bit corresponds to one of the ISO DPA output OIDs. ISO DPA: Output This attribute identifies the output processing f… |
| XcmJMDocState | INTEGER { other(1), unknown(2), transferPending(3), pending(4), processing(5), completed(6), printing(7) } | current | The following standard values are defined for the state of contained-documents: transferPending The server has created the document object, but the data transfer of the document data has not started or completed (id-val… |
| XcmJMDocType | INTEGER { other(1), unknown(2), printable(3), font(4), resource(5) } | current | Jobs contain contained-documents. Contained-documents may be printable, font, or resource objects. This had been deleted due to object deletions from 41jobmon.mib, but has been restored along with those objects. ISO DPA… |
| XcmJMGroupSupport | INTEGER(0..2147483647) | current | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Job Monitoring MIB groups supported by this management agent implementation (i.e., version) on this host system, specified in … |
| XcmJMImpsCountType | INTEGER { other(1), totalCount(4), blackAndWhiteCount(5), highlightColorCount(6), fullColorCount(7), oneVisibleColorCount(11), limitedVisibleColorCount(19), oneColorantCount(21), twoColorantCount(22), threeColorantCount(23), fourColorantCount(24) } | current | The recognized impression counting types for impressions produced by the jobs. The following standard values are defined for the count-type. total count Count all impressions. black and white count Count impressions req… |
| XcmJMJobServiceTypeOID | current | Specifies the type of service to which the job has been submitted. The service type is represented as a single OID, rather than as an OID for a source-type and an OID for a destination-type, so that more general and arb… | |
| XcmJMJobState | INTEGER { other(1), unknown(2), created(3), pending(6), processing(7), interrupted(8), retained(11), held(12), paused(13), terminating(14), completed(17), printing(18) } | current | A job may be in any of the states defined by this textual- convention. The Xerox Job model is a refinement of the ISO DPA standard and generalizes to non-printing devices. The textual definitions given here are an abbre… |
| XcmJMJobStateReasons | INTEGER(0..2147483647) | current | This representation is bit-encoded, so that multiple reasons can occur at once. Each bit corresponds to an ISO DPA OID for the same reason. The MIB enum value is given by: value = 2 ** (last arc of DPA id-val-reasons-xx… |
| XcmJMJobX2StateReasons | INTEGER(0..2147483647) | current | This representation is bit-encoded, so that multiple reasons can occur at once. Each bit corresponds to a Xerox OID for the same Xerox extension to the ISO DPA job state reason. In a DPA protocol, the DPA and Xerox OID … |
| XcmJMJobXStateReasons | INTEGER(0..2147483647) | current | This representation is bit-encoded, so that multiple reasons can occur at once. Each bit corresponds to a Xerox OID for the same Xerox extension to the ISO DPA job state reason. In a DPA protocol, the DPA and Xerox OID … |
| XcmJMMediumType | INTEGER { other(1), unknown(2), stationery(3), transparency(4), envelope(5), envelopePlain(6), continuousLong(7), continuousShort(8), tabStock(9), multiPartForm(10), labels(11), envelopeWindow(12), multiLayer(13), prePrinted(14), letterhead(15), coverStock(16), drilled(100), coated(101), recycled(102), heavyWeight(103) } | current | The recognized types of media. NOTE: For this MIB, these values are enums, instead of strings. This departure from the IETF Printer MIB where medium-types are strings is so that the medium types can be more easily local… |