MIB Viewer

XGCP-MIB

47 objects
The MIB module for managing XGCP implementations.
Imported Objects
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 experimental Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.3.90IdentityxgcpMIBThe MIB module for managing XGCP implementations.
1.3.6.1.3.90.1NodexgcpObjects
1.3.6.1.3.90.1.1NodexgcpCoreObjects
1.3.6.1.3.90.1.1.1ScalarxgcpInBadVersionsread-onlycurrentThe total number of incoming messages which were delivered to the protocol entity and were for an unsupported protocol version.
1.3.6.1.3.90.1.1.2ScalarxgcpRequestTimeOutread-writecurrentThe request timeout is used to determine the timeout value used for retransmitting unacknowledged message. It is the responsibility of the requesting entity to…
1.3.6.1.3.90.1.1.3ScalarxgcpRequestRetriesread-writecurrentThis object specifies the number of retries for a request that exceeds timeout. It is the responsibility of the requesting entity to provide suitable timeouts …
1.3.6.1.3.90.1.1.4ScalarxgcpAdminStatusread-writecurrentThe desired state of the protocol entity. The possible admin status are: up - bring up protocol entity administratively down - bring down protocol entity adimi…
1.3.6.1.3.90.1.1.5ScalarxgcpOperStatusread-onlycurrentThis object indicates the current operational status of the protocol entity. The possible operating status are: up - protocol up down - protocol down shutDownI…
1.3.6.1.3.90.1.1.6ScalarxgcpUnRecognizedPacketsread-onlycurrentThis refers to the count of unrecognized packets since reset.
1.3.6.1.3.90.1.1.7TablexgcpMsgStatTablenot-accessiblecurrentThis table contains XGCP statistics information since reset. XGCP statistics are kept in this table, with each table entry containing the statistics of XGCP th…
1.3.6.1.3.90.1.1.7.1RowxgcpMsgStatEntrynot-accessiblecurrentThe row of the xgcpMsgStatTable contains information about XGCP message statistics per IP address of the Media Gateway Controller. An entry is created when a r…
1.3.6.1.3.90.1.1.7.1.1ColumnxgcpIPAddressnot-accessiblecurrentThis object specifies the IP address of the Media Gateway Controller.
1.3.6.1.3.90.1.1.7.1.2ColumnxgcpSuccessMessagesread-onlycurrentThis object specifies the count of successful messages that communicate with the Media Gateway Controller on that IP address. Successful messages apply to both…
1.3.6.1.3.90.1.1.7.1.3ColumnxgcpFailMessagesread-onlycurrentThis object specifies the count of failed messages that communicate with the Media Gateway Controller on that IP address. Failed messages apply to both transmi…
1.3.6.1.3.90.1.2NodexgcpExtensionObjects
1.3.6.1.3.90.1.2.1ScalarxgcpRestartInProgressMWDread-writecurrentThe maximum waiting delay (MWD) timeout value is used for the Media Gateway to send the Restart In Progress to the Media Gateway Controller. The default value …
1.3.6.1.3.90.1.2.2ScalarxgcpRestartDelayread-writecurrentThis object specifies the Restart Delay Timeout for the restart process. The purpose of setting the restart timer before sending the Restart In Progress notifi…
1.3.6.1.3.90.1.3NodexgcpPackageObjects
1.3.6.1.3.90.1.3.1TablexgcpCapabilityPackageTablenot-accessiblecurrentThis table contains XGCP capability packages. The Capability Package table - This table is used to specify the availability of the packages. The Capabality Pac…
1.3.6.1.3.90.1.3.1.1RowxgcpCapabilityPackageEntrynot-accessiblecurrentThe entry specifies the availability of the XGCP package. Each entry is created when the MGCP software detects a new package. The entry goes away only if the p…
1.3.6.1.3.90.1.3.1.1.1ColumnxgcpCapabilityPackageNamenot-accessiblecurrentThis object specifies the Name of the Capability Package. The list of basic packages includes the following: _________________________________________ | Packag…
1.3.6.1.3.90.1.3.1.1.2ColumnxgcpCapabilityPackageEnableread-writecurrentThis object eables/disables the Package Capability
1.3.6.1.3.90.1.3.2ScalarxgcpDefaultPackageread-writecurrentThis object contains the default package name for the MGCP/SGCP protocol and it should have the same value as xgcpCapabilityPackageName.
1.3.6.1.3.90.1.4NodexgcpVoiceQualityObjects
1.3.6.1.3.90.1.4.1ScalarxgcpLowerBoundForPacketLossread-writecurrentThis object specifies the lower bound for voice quality packet loss per 100,000 packets. Voice quality packet loss may happen due to network congestion or due …
1.3.6.1.3.90.1.4.2ScalarxgcpHigherBoundForPacketLossread-writecurrentThis object specifies the higher bound for voice quality packet loss per 100,000 packets. Voice quality packet loss may happen due to network congestion or due…
1.3.6.1.3.90.1.4.3ScalarxgcpLowerBoundForJitterread-writecurrentThis object is the lower bound for Quality Alert for Jitter. Jitter is an estimate of the statistical variance of the RTP data packet interval-rival time measu…
1.3.6.1.3.90.1.4.4ScalarxgcpHigherBoundForJitterread-writecurrentThis object is the higher bound for Quality Alert for Jitter. Jitter is an estimate of the statistical variance of the RTP data packet interval-rival time meas…
1.3.6.1.3.90.1.4.5ScalarxgcpLowerBoundForLatencyread-writecurrentThis object is the higher bound for Quality Alert for latency. QA latency is an estimate of the network delay, expressed in milliseconds. This is the average v…
1.3.6.1.3.90.1.4.6ScalarxgcpHigherBoundForLatencyread-writecurrentThis object is the higher bound for Quality Alert for latency. QA latency is an estimate of the network delay, expressed in milliseconds. This is the average v…
1.3.6.1.3.90.1.5NodexgcpDefaultMGCObjects
1.3.6.1.3.90.1.5.1ScalarxgcpMGCCfgAddressread-writecurrentThis object is used to configure either the domain name or the IP address of the Default Media Gateway Controller in standard dot notation. The complete addres…
1.3.6.1.3.90.1.5.2ScalarxgcpMGCCfgUDPPortread-writecurrentThis object is used to configure the UDP port of the Media Gateway Controller. The UDP port is used together with xgcpMGCCfgAddress to specify the destination …
1.3.6.1.3.90.1.5.3ScalarxgcpMGCCfgConnStatusread-onlycurrentThis object is used to specify the connection status of the Default Media Gateway Controller. When sending RSIP to default Media Gateway Controller, there coul…
1.3.6.1.3.90.1.5.4ScalarxgcpMGCCfgTimeStampread-onlycurrentThis object contains the time stamp of state transition of xgcpMGCCfgConnStatus.
1.3.6.1.3.90.2NodexgcpNotificationPrefix
1.3.6.1.3.90.2.0NodexgcpNotifications
1.3.6.1.3.90.2.0.1NotificationxgcpUpDownNotificationcurrentThis notification is sent when the protocol status changes between up and down. The following information is returned: xgcpOperStatus -> Current operational st…
1.3.6.1.3.90.3NodexgcpMIBConformance
1.3.6.1.3.90.3.1NodexgcpMIBCompliances
1.3.6.1.3.90.3.1.1CompliancexgcpMIBCompliancecurrentThe compliance statement for the SNMPv2 entities which implement XGCP.
1.3.6.1.3.90.3.2NodexgcpMIBGroups
1.3.6.1.3.90.3.2.1GroupxgcpCoreGroupcurrentThis group contains core objects for SGCP/MGCP on the Media Gateway Controller and the Media Gateway.
1.3.6.1.3.90.3.2.2GroupxgcpExtensionGroupcurrentThis group contains extension objects for MGCP on the Media Gateway.
1.3.6.1.3.90.3.2.3GroupxgcpPackageGroupcurrentThis group contains package objects for MGCP on the Media Gateway or the Media Gateway Controller.
1.3.6.1.3.90.3.2.4GroupxgcpVoiceQualityGroupcurrentThis group contains voice quality objects for the Media Gateway .
1.3.6.1.3.90.3.2.5GroupxgcpDefaultMGCGroupcurrentThis group contains address objects for default Media Gateway Controller.