XSWITCH-MIB
337 objects
No module-level DESCRIPTION found.
Imported Objects
| GEN-MIB | lannet |
| IEEE8021-PAE-MIB | PaeControlledPortStatus |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.28 | NodeswitchChip | |||
| 1.3.6.1.4.1.81.28.1 | NodescGen | |||
| 1.3.6.1.4.1.81.28.1.1 | NodescGenChassis | |||
| 1.3.6.1.4.1.81.28.1.1.1 | ScalarscGenChMainAgPosition | read-only | mandatory | This attribute defines the position in the chassis where the Main Agent resides. |
| 1.3.6.1.4.1.81.28.1.1.2 | ScalarscGenChRedunAgPosition | read-only | mandatory | This attribute defines the position in the chassis where the Redundant Agent resides. 0 means Redundant Agent not present. |
| 1.3.6.1.4.1.81.28.1.1.3 | ScalarscGenChRedunAgActivityStatus | read-only | mandatory | This attribute defines the status of the Redundant Agent. notPresent(1) - indicates that no redundant Agent exists. dormant(2) - indicates that the redundant A… |
| 1.3.6.1.4.1.81.28.1.1.4 | ScalarscGenChAgVLAN | read-write | mandatory | The Virtual LAN number of the Agent's internal interface. The value 0 means Generic ( But can communicate with Global !). The values '255' mean Global. |
| 1.3.6.1.4.1.81.28.1.2 | NodescGenMon | |||
| 1.3.6.1.4.1.81.28.1.2.1 | TablescGenMonTable | not-accessible | mandatory | Table of attributes which define Monitoring information about a single XSwitch in SC based devices. |
| 1.3.6.1.4.1.81.28.1.2.1.1 | RowscGenMonEntry | not-accessible | mandatory | An entry in the table, containing data about a single XSwitch. |
| 1.3.6.1.4.1.81.28.1.2.1.1.1 | ColumnscGenMonSwitchId | read-only | mandatory | Index which identifies the XSwitch for which this entry contains information. This value is never greater than chNumberOfXSwitches. |
| 1.3.6.1.4.1.81.28.1.2.1.1.2 | ColumnscGenMonDropEvents | read-only | mandatory | The total number of events in which the probe could not count packets due to lack of resources. This number is not necessarily the number of packets dropped; i… |
| 1.3.6.1.4.1.81.28.1.2.1.1.3 | ColumnscGenMonOctets | read-only | mandatory | The total number of good octets switched and error octets filtered by this XSwitch. |
| 1.3.6.1.4.1.81.28.1.2.1.1.4 | ColumnscGenMonPkts | read-only | mandatory | The total number of good packets switched and error packets filtered by this XSwitch. |
| 1.3.6.1.4.1.81.28.1.2.1.1.5 | ColumnscGenMonGoodBroadcastPkts | read-only | mandatory | The total number of good packets switched by this XSwitch that were directed to the broadcast address. |
| 1.3.6.1.4.1.81.28.1.2.1.1.6 | ColumnscGenMonGoodMulticastPkts | read-only | mandatory | The total number of good packets switched by this XSwitch that were directed to the multicast address. Note that this number does not include packets directed … |
| 1.3.6.1.4.1.81.28.1.2.1.1.7 | ColumnscGenMonGoodPkts | read-only | mandatory | The total number of good packets switched by this XSwitch. |
| 1.3.6.1.4.1.81.28.1.2.1.1.8 | ColumnscGenMonBadPkts | read-only | mandatory | The total number of bad packets filtered by this XSwitch. |
| 1.3.6.1.4.1.81.28.1.2.1.1.9 | ColumnscGenMonGoodOctets | read-only | mandatory | The total number of good octets switched by this XSwitch. |
| 1.3.6.1.4.1.81.28.1.2.1.1.10 | ColumnscGenMonBadOctets | read-only | mandatory | The total number of bad octets filtered by this XSwitch. |
| 1.3.6.1.4.1.81.28.1.2.1.1.11 | ColumnscGenMonSmonCapability | read-only | mandatory | This item is used to define which smon's application are implemented in the agent. When the console first performs smon application it should read this item in… |
| 1.3.6.1.4.1.81.28.1.2.1.1.12 | ColumnscGenMonMIBCtrMode | read-write | mandatory | This object defines for switch ports to include/exclude local segment traffic in their port counters |
| 1.3.6.1.4.1.81.28.1.2.1.1.13 | ColumnscGenMonSwitchVLANList | read-only | mandatory | A bitmap defining the status of the virtual LANs in the Virtual LAN Table. The first bit is for Virtual LAN 0, the second for Virtual LAN 1, and so on. If the … |
| 1.3.6.1.4.1.81.28.1.2.1.1.14 | ColumnscGenMonMIBCtrList | read-only | mandatory | A bitmap defining the status of the MIBCtrMode for every group in the switch. The MSB (Most significant bit) representing the status of group #1. If MIBCtrMode… |
| 1.3.6.1.4.1.81.28.1.2.1.1.15 | ColumnscGenMonTimeStamp | read-only | mandatory | This attribute contains the value of sysUpTime at the time switch counters were calculated. |
| 1.3.6.1.4.1.81.28.1.2.1.1.16 | ColumnscGenMonVlanTimeStamp | read-only | mandatory | This attribute contains the value of sysUpTime at the time VLAN counters were calculated. |
| 1.3.6.1.4.1.81.28.1.2.2 | TablescGenMonPriorityTable | not-accessible | mandatory | A list of priority count entries. |
| 1.3.6.1.4.1.81.28.1.2.2.1 | RowscGenMonPriorityEntry | not-accessible | mandatory | A list of statistics related to a specific priority level on a single XSwitch in SC based devices. |
| 1.3.6.1.4.1.81.28.1.2.2.1.1 | ColumnscGenMonPrioritySwitchId | read-only | mandatory | Index which identifies the XSwitch for which this entry contains information. This value is never greater than chNumberOfXSwitches. |
| 1.3.6.1.4.1.81.28.1.2.2.1.2 | ColumnscGenMonPriorityId | read-only | mandatory | The priority for which this entry reports statistics. 1=regular. 2=high. |
| 1.3.6.1.4.1.81.28.1.2.2.1.3 | ColumnscGenMonPriorityGoodPkts | read-only | mandatory | The total number of good packets switched by this XSwitch using this packet priority level. |
| 1.3.6.1.4.1.81.28.1.2.2.1.4 | ColumnscGenMonPriorityGoodOctets | read-only | mandatory | The total number of good octets switched by this XSwitch using this packet priority level. |
| 1.3.6.1.4.1.81.28.1.2.3 | ScalarscGenMonVLANList | read-only | mandatory | A bitmap defining the status of the virtual LANs in the Virtual LAN Table. The first bit is for Virtual LAN 0, the second for Virtual LAN 1, and so on. If the … |
| 1.3.6.1.4.1.81.28.1.2.4 | TablescGenMonVLANTable | not-accessible | mandatory | A list of virtual LAN statistics. |
| 1.3.6.1.4.1.81.28.1.2.4.1 | RowscGenMonVLANEntry | not-accessible | mandatory | A list of statistics related to a specific Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.2.4.1.1 | ColumnscGenMonVLANSwitchId | read-only | mandatory | Index which identifies the XSwitch for which this entry contains information. This value is never greater than chNumberOfXSwitches. |
| 1.3.6.1.4.1.81.28.1.2.4.1.2 | ColumnscGenMonVLANId | read-only | mandatory | The Virtual LAN for which this entry contains information. |
| 1.3.6.1.4.1.81.28.1.2.4.1.3 | ColumnscGenMonVLANGoodPkts | read-only | mandatory | The total number of good packets switched by the XSwitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.2.4.1.4 | ColumnscGenMonVLANGoodOctets | read-only | mandatory | The total number of good octets switched by the XSwitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.2.4.1.5 | ColumnscGenMonVLANStatsUcastPkts | read-only | mandatory | The total number of good unicast packets switched by the XSwitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.2.4.1.6 | ColumnscGenMonVLANStatsMcastPkts | read-only | mandatory | The total number of good multicast packets switched by the XSwitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.2.4.1.7 | ColumnscGenMonVLANStatsBcastPkts | read-only | mandatory | The total number of good broadcast packets switched by the XSwitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.2.5 | ScalarscGenMonSwitches | read-only | mandatory | A bitmap defining the switch status, whether it is functional or not. The list should start with the MSB. Value of each bit: 0 - the switch is not functional 1… |
| 1.3.6.1.4.1.81.28.1.2.6 | TablescHostTimePortCorrTable | not-accessible | mandatory | An addition to the RMON MIB's hostTimeTable. This table contains a list of MAC addresses that were monitored on the switch and the ports to which they are conn… |
| 1.3.6.1.4.1.81.28.1.2.6.1 | RowscHostTimePortCorrEntry | not-accessible | mandatory | An entry in the MAC to port correlation table. |
| 1.3.6.1.4.1.81.28.1.2.6.1.1 | ColumnscHostTimeAddress | read-only | mandatory | The physical address of this host. |
| 1.3.6.1.4.1.81.28.1.2.6.1.2 | ColumnscHostTimeCreationOrder | read-only | mandatory | An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 a… |
| 1.3.6.1.4.1.81.28.1.2.6.1.3 | ColumnscHostTimeIndex | read-only | mandatory | The set of collected RMON host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the… |
| 1.3.6.1.4.1.81.28.1.2.6.1.4 | ColumnscHostTimePortConnection | read-only | mandatory | The switch port to which this scHostTimeAddress is connected. The coding of the port number for Visage switches is: 32*(H-1)+P, where H is the number of the hu… |
| 1.3.6.1.4.1.81.28.1.3 | NodescGenGroup | |||
| 1.3.6.1.4.1.81.28.1.3.1 | TablescGenGroupTable | not-accessible | mandatory | Table of attributes which define general configuration information about a single SC based group. |
| 1.3.6.1.4.1.81.28.1.3.1.1 | RowscGenGroupEntry | not-accessible | mandatory | An entry in the table, containing data about a single Group. |
| 1.3.6.1.4.1.81.28.1.3.1.1.1 | ColumnscGenGroupId | read-only | mandatory | Unique Id of the group in the scGenGroupTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.3.1.1.2 | ColumnscGenGroupUseSwitches | read-only | mandatory | This attribute reflects the status of the `Use Switches' switch which defines the working mode of the module. on - The module works according to the switches. … |
| 1.3.6.1.4.1.81.28.1.3.1.1.3 | ColumnscGenGroupCopyPortSupport | read-only | mandatory | Indication whether a module supports Copy-Port [on(1)], or does not support Copy-Port [off(2)]. |
| 1.3.6.1.4.1.81.28.1.3.1.1.4 | ColumnscGenGroupXswitchConnection | read-only | mandatory | This attribute identifies the Xswitch number (1..4) to which the module is connected to. In non-bridged configuration, there are potentialy up to 4 Xswitches -… |
| 1.3.6.1.4.1.81.28.1.3.1.1.5 | ColumnscGenGroupStatus | read-only | mandatory | This attributes defines the status of the Xswitch module. The value 'loadsBudgetProblem' indicates that the module cannot be connected to the Xswitch because i… |
| 1.3.6.1.4.1.81.28.1.3.1.1.6 | ColumnscGenGroupSwitchType | read-only | mandatory | This attribute defines the Xswitch type of the module. |
| 1.3.6.1.4.1.81.28.1.3.1.1.7 | ColumnscGenGroupNumberOfLoads | read-only | mandatory | This attribute identifies the number of loads which that Xswitch module represents. |
| 1.3.6.1.4.1.81.28.1.3.1.1.8 | ColumnscGenGroupSetDefaults | read-write | mandatory | Set all module and ports parameters in the XSwitch module, to their default values. This item will always return a value of off(2), since it acts like a toggle… |
| 1.3.6.1.4.1.81.28.1.3.1.1.9 | ColumnscGenGroupSupportCopyPortList | read-only | mandatory | A bitmap defining the status of each port of the hub\module whether it support copy port or not, 0 - the port does not support copy port 1 - the port support t… |
| 1.3.6.1.4.1.81.28.1.3.1.1.10 | ColumnscGenGroupSupportPortCountersList | read-only | mandatory | A bitmap defining the status of each port of the hub\module whether it supports the port's counters, 0 - the port does not support port's counters 1 - the port… |
| 1.3.6.1.4.1.81.28.1.3.1.1.11 | ColumnscGenGroupSupportSegCountersList | read-only | mandatory | A bitmap defining the status of each port of the hub\module whether it supports the segment counters on port, 0 - the port does not support segment's counters … |
| 1.3.6.1.4.1.81.28.1.3.1.1.12 | ColumnscGenGroupUpLinkType | read-write | mandatory | The type of the Up Link port Relevant only for the 25th port of Visage 2500: Fiber (1) - 100BaseFX, Copper (2) -100BaseTX. |
| 1.3.6.1.4.1.81.28.1.3.1.1.13 | ColumnscGenGroupPlugInType | read-only | mandatory | Attribute describing the type of the plug-in module |
| 1.3.6.1.4.1.81.28.1.3.1.1.14 | ColumnscGenGroupPlugInDescr | read-only | mandatory | Descriptor of the plug-in in ASCII (readable) format, mainly for use with Generic management applications. |
| 1.3.6.1.4.1.81.28.1.3.1.1.15 | ColumnscGenGroupPlugInCS | read-only | mandatory | ASCII string for description and display of the plug-in module configuration symbol. The format of the number is XXXX.YY |
| 1.3.6.1.4.1.81.28.1.3.1.1.16 | ColumnscGenGroupDefaultVLAN | read-only | mandatory | Attribute describing the Default VLAN configuration on the switch ports of the module. It is determined according to scGenSwitchDefaultVLAN parameter of the ag… |
| 1.3.6.1.4.1.81.28.1.3.1.1.17 | ColumnscGenGroupCascadingType | read-only | mandatory | Attribute describing the type of the cascding module |
| 1.3.6.1.4.1.81.28.1.3.1.1.18 | ColumnscGenGroupCascadingDescr | read-only | mandatory | Descriptor of the cascading module in ASCII (readable) format, mainly for use with Generic management applications. |
| 1.3.6.1.4.1.81.28.1.3.1.1.19 | ColumnscGenGroupCascadingCS | read-only | mandatory | ASCII string for description and display of the cascading module configuration symbol. The format of the number is XXX.YYY |
| 1.3.6.1.4.1.81.28.1.3.1.1.20 | ColumnscGenGroupSupportDstCopyPortList | read-only | mandatory | A bitmap defining the status of each port of the hub\module whether it supports the capability of being a destination copy-port . 1 - the port has the capabili… |
| 1.3.6.1.4.1.81.28.1.3.1.1.21 | ColumnscGenGroupBUPSType | read-only | mandatory | Attribute describing the type of the BUPS module |
| 1.3.6.1.4.1.81.28.1.3.1.1.22 | ColumnscGenGroupBUPSCS | read-only | mandatory | ASCII string for description and display of the BUPS module configuration symbol. The format of the number is X.Y |
| 1.3.6.1.4.1.81.28.1.3.1.1.23 | ColumnscGenGroupBUPSFansStatus | read-only | mandatory | The operational status of the fans included in the BUPS module: allFansOK(1) - all BUPS module's fans are operational. oneFanFailed(2) - at least one of the BU… |
| 1.3.6.1.4.1.81.28.1.3.1.1.24 | ColumnscGenGroupFansStatus | read-only | mandatory | The operational status of the fans included in the module: allFansOK(1) - all module's fans are operational. oneFanFailed(2) - at least one of the module's fan… |
| 1.3.6.1.4.1.81.28.1.3.1.1.25 | ColumnscGenGroupInternalBuffering | read-write | mandatory | Control the internal buffering capacity. |
| 1.3.6.1.4.1.81.28.1.3.1.1.26 | ColumnscGenGroupMcFilterBoxSupport | read-only | mandatory | Tells whether the box hardware supports filtering or not. |
| 1.3.6.1.4.1.81.28.1.3.1.1.27 | ColumnscGenGroupMcFilterPersonalitySupport | read-only | mandatory | Tells whether the personality hardware supports filtering or not. The value PersonalityNotInstalld means that the a personality Extention was not installed in … |
| 1.3.6.1.4.1.81.28.1.3.1.1.28 | ColumnscGenGroupMcFilterStackingSupport | read-only | mandatory | Tells whether the stacking hardware supports filtering or not The value StackingNotInstalld means that the a stacking daughter board was not installed in the s… |
| 1.3.6.1.4.1.81.28.1.3.1.1.29 | ColumnscGenGroupLACPMode | read-write | mandatory | The value of this attribute determines whether LACPDU messages can be exchanged by the module's ports. If enabled, the ports will exchange LACPDU messages acco… |
| 1.3.6.1.4.1.81.28.1.3.1.1.30 | ColumnscGenGroupSecurityMode | read-write | mandatory | Group intrusion security mode assigned to this module. securityMode - all ports in this module are secure according to their scGenPortSecurityMode MIB's value.… |
| 1.3.6.1.4.1.81.28.1.3.1.1.31 | ColumnscGenGroupBroadcastStormControl | read-write | mandatory | Set the Broadcast Storm Control function on all switch ports. On means that Broadcast, Multicast or Unknown packets are discarded on an ingress port, when the … |
| 1.3.6.1.4.1.81.28.1.3.1.1.32 | ColumnscGenGroupBroadcastThreshold | read-write | mandatory | Set the Rate Threshold, in packets per second, above which Broadcast, Multicast or Unknown packets are discarded on ingress port. |
| 1.3.6.1.4.1.81.28.1.3.1.1.33 | ColumnscGenGroupPriorityQueuesScheduling | read-write | mandatory | Set the Priority Queues Scheduling scheme for packets transmission from egress ports. Strict - will serve higher priority queue before lower priority queue, as… |
| 1.3.6.1.4.1.81.28.1.3.1.1.34 | ColumnscGenGroupBoundedDelay | read-write | mandatory | Set the Bounded Delay function in the switch. On will ensure that time-sensitive packets will be forwarded through the switch in no more than a maximum delay. |
| 1.3.6.1.4.1.81.28.1.3.1.1.35 | ColumnscGenGroupSLDAdminStatus | read-write | mandatory | set the Self Loop Discovery application to enable/disable. This works with the scGenPortSLDAdminStatus |
| 1.3.6.1.4.1.81.28.1.3.1.1.36 | ColumnscGenGroupDynamicVlans | read-write | mandatory | Indicates the number of dynamic vlans detected in the module so far. If this value is set to zero, all dynamic vlans detected up to this time will be deleted. |
| 1.3.6.1.4.1.81.28.1.3.1.1.37 | ColumnscGenGroupSecurityMacCount | read-only | mandatory | Indicates the number of secure MAC assigned to this module so far. The value should be 0 if the secure MAC table is empty for this module. |
| 1.3.6.1.4.1.81.28.1.3.1.1.38 | ColumnscGenGroupBUPSAllocatedPower | read-write | mandatory | Indicates the total 48V BUPS power that is allocated to this module in Watts. |
| 1.3.6.1.4.1.81.28.1.3.2 | TablescGenGroupSmonTable | not-accessible | mandatory | Table of smon capabilities in a single group. |
| 1.3.6.1.4.1.81.28.1.3.2.1 | RowscGenGroupSmonEntry | not-accessible | mandatory | An entry in the table, containing data about a single Group. |
| 1.3.6.1.4.1.81.28.1.3.2.1.1 | ColumnscGenGroupSmonGroupId | read-only | mandatory | Unique Id of the group in the scGenGroupSmonTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.3.2.1.2 | ColumnscGenGroupSmonCapability | read-only | mandatory | This item is used to define which smon's application are implemented in the group. When there is a value of 0 (zero) in the relevant bit it means that the asso… |
| 1.3.6.1.4.1.81.28.1.3.2.1.3 | ColumnscGenGroupSmonVlanList | read-only | mandatory | A bitmap defining the status of the virtual LANs in the Virtual LAN Table. The first bit is for Virtual LAN 0, the second for Virtual LAN 1, and so on. If the … |
| 1.3.6.1.4.1.81.28.1.3.2.1.4 | ColumnscGenGroupSmonDropEvents | read-only | mandatory | The total number of events ,in this group, in which the probe could not count packets due to lack of resources. This number is not necessarily the number of pa… |
| 1.3.6.1.4.1.81.28.1.3.2.1.5 | ColumnscGenGroupSmonGoodBroadcastPkts | read-only | mandatory | The total number of good broadcast packets in this group, switched by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.6 | ColumnscGenGroupSmonGoodMulticastPkts | read-only | mandatory | The total number of good multicast packets, in this group, switched by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.7 | ColumnscGenGroupSmonGoodPkts | read-only | mandatory | The total number of good packets, in this group, switched by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.8 | ColumnscGenGroupSmonBadPkts | read-only | mandatory | The total number of bad packets , in this group, filtered by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.9 | ColumnscGenGroupSmonGoodOctets | read-only | mandatory | The total number of good octets, in this group, switched by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.10 | ColumnscGenGroupSmonBadOctets | read-only | mandatory | The total number of bad octets, in this group, filtered by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.11 | ColumnscGenGroupSmonPkts | read-only | mandatory | The total number of packets, good and bad, in this group, switched by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.12 | ColumnscGenGroupSmonOctets | read-only | mandatory | The total number of octets, good and bad, in this group, switched by the Xswitch. |
| 1.3.6.1.4.1.81.28.1.3.2.1.13 | ColumnscGenGroupSmonMIBCtrMode | read-write | mandatory | This object defines for group ports to include/exclude local segment traffic in their port counters |
| 1.3.6.1.4.1.81.28.1.3.3 | TablescGenGroupVlanTable | not-accessible | mandatory | Table of attributes which define general VLAN counters of a single SC based group. |
| 1.3.6.1.4.1.81.28.1.3.3.1 | RowscGenGroupVlanEntry | not-accessible | mandatory | An entry in the table, containing VLAN counters in a single Group. |
| 1.3.6.1.4.1.81.28.1.3.3.1.1 | ColumnscGenGroupVlanGroupId | read-only | mandatory | Unique Id of the group in the scGenGroupVlanTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.3.3.1.2 | ColumnscGenGroupVlanId | read-only | mandatory | The Virtual LAN for which this entry contains information. |
| 1.3.6.1.4.1.81.28.1.3.3.1.3 | ColumnscGenGroupVlanUcastPkts | read-only | mandatory | The total number of good unicast packets ,in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.4 | ColumnscGenGroupVlanMcastPkts | read-only | mandatory | The total number of good multicast packets ,in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.5 | ColumnscGenGroupVlanBcastPkts | read-only | mandatory | The total number of good broadcast packets in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.6 | ColumnscGenGroupVlanGoodPkts | read-only | mandatory | The total number of good packets ,in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.7 | ColumnscGenGroupVlanGoodOctets | read-only | mandatory | The total number of good octets ,in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.8 | ColumnscGenGroupVlanUcastOctets | read-only | mandatory | The total number of good unicast octets ,in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.9 | ColumnscGenGroupVlanMcastOctets | read-only | mandatory | The total number of good multicast octets ,in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.10 | ColumnscGenGroupVlanBcastOctets | read-only | mandatory | The total number of good broadcast octets ,in this group, switched by the Xswitch on this Virtual LAN. |
| 1.3.6.1.4.1.81.28.1.3.3.1.11 | ColumnscGenGroupVlanCurrentEgressPorts | read-only | mandatory | The set of ports in this module which are transmitting traffic for this vlan as either tagged or untagged frames. Each module's port is represented by a single… |
| 1.3.6.1.4.1.81.28.1.3.3.1.12 | ColumnscGenGroupVlanCurrentUntaggedPorts | read-only | mandatory | The set of ports which are transmitting traffic for this VLAN as untagged frames. Each module's port is represented by a single bit in this 128-bits bitmap acc… |
| 1.3.6.1.4.1.81.28.1.3.3.1.13 | ColumnscGenGroupVlanStaticEgressPorts | read-write | mandatory | The set of ports in this module which are permanently assigned to the egress list for this VLAN by management. Each module's port is represented by a single bi… |
| 1.3.6.1.4.1.81.28.1.3.3.1.14 | ColumnscGenGroupVlanStaticUntaggedPorts | read-write | mandatory | The set of ports which should transmit egress packets for this VLAN as untagged. Each module's port is represented by a single bit in this 128-bits bitmap acco… |
| 1.3.6.1.4.1.81.28.1.3.4 | TablescGenGroupRspTable | not-accessible | mandatory | . |
| 1.3.6.1.4.1.81.28.1.3.4.1 | RowscGenGroupRspEntry | not-accessible | mandatory | . |
| 1.3.6.1.4.1.81.28.1.3.4.1.1 | ColumnscGenGroupRspGroupId | read-only | mandatory | Unique Id of the group in the scGenGroupRspTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.3.4.1.2 | ColumnscGenGroupRspHelloInterval | read-write | mandatory | The interval between transmissions of hello-messages, in 100mSec units. |
| 1.3.6.1.4.1.81.28.1.3.4.1.3 | ColumnscGenGroupRspDevicePollingInterval | read-write | mandatory | The interval between transmissions of ARP queries for polling connectivity to the device, in 100mSec units. |
| 1.3.6.1.4.1.81.28.1.3.4.1.4 | ColumnscGenGroupRspDeviceNotRespondingTimeout | read-write | mandatory | Amount of time in which no ARP-replies are received from the device, which cause the RSP to assume no connection to that device, in 100mSec units. |
| 1.3.6.1.4.1.81.28.1.3.4.1.5 | ColumnscGenGroupRspSwitchNotRespondingTimeout | read-write | mandatory | Amount of time in which no hello-messages with acknowledge are received from the other switch, which cause the RSP to assume no connection to that switch, in 1… |
| 1.3.6.1.4.1.81.28.1.3.4.1.6 | ColumnscGenGroupRspMoveToForwardingInterval | read-write | mandatory | Amount of time the port waits upon deciding to move to forwarding mode, until it moves to that mode, in 100mSec units. |
| 1.3.6.1.4.1.81.28.1.3.4.1.7 | ColumnscGenGroupRspBroadcastArpShortInterval | read-write | mandatory | The interval in which the switch should send broadcast ARPs to the device when not knowing the MAC-address of the device, in 100mSec units. |
| 1.3.6.1.4.1.81.28.1.3.4.1.8 | ColumnscGenGroupRspBroadcastArpShortIntervalNumber | read-write | mandatory | The number of broadcast ARPs the switch should send in short interval time, when not knowing the MAC address of the device |
| 1.3.6.1.4.1.81.28.1.3.4.1.9 | ColumnscGenGroupRspBroadcastArpLongInterval | read-write | mandatory | The interval in which the switch should send broadcast ARPs to the device when the device does not respond to unicast ARPs, in 100mSec units. |
| 1.3.6.1.4.1.81.28.1.3.4.1.10 | ColumnscGenGroupRspPeriodicPingsBoxIpAddress | read-write | mandatory | This MIB-item is the IP-address that the P330 box uses in order to periodically ping to devices Default value for IP Address is 0.0.0.0 |
| 1.3.6.1.4.1.81.28.1.3.4.1.11 | ColumnscGenGroupRspPeriodicPingsDestinationIpAddress | read-write | mandatory | This MIB-item sets an IpAddress that the devices will be configured to periodically ping to. The switch will be responsible to reply to ARP-queries concerning … |
| 1.3.6.1.4.1.81.28.1.3.4.1.12 | ColumnscGenGroupRspMode | read-write | mandatory | Sets the mode of the module from the RSP-application prespective. Possible modes are: RSP-module-mode-role-A - means that the ports of this module perform the … |
| 1.3.6.1.4.1.81.28.1.3.5 | TablescGenGroupDot1xTable | not-accessible | mandatory | This table includes additional information for the extension of 802.1x multi-supplicant mode. |
| 1.3.6.1.4.1.81.28.1.3.5.1 | RowscGenGroupDot1xEntry | not-accessible | mandatory | This entry includes information about 802.1x supplicants connected to a device/module. |
| 1.3.6.1.4.1.81.28.1.3.5.1.1 | ColumnscGenGroupDot1xGroupId | read-only | mandatory | Unique Id of the group in the scGenGroupRspTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.3.5.1.2 | ColumnscGenGroupDot1xSystemMaxNumSupplicant | read-only | mandatory | The total number of supplicants allowed in the specific group. |
| 1.3.6.1.4.1.81.28.1.3.5.1.3 | ColumnscGenGroupDot1xCurrentNumSupplicant | read-only | mandatory | The total number of supplicants connected in the specific group. |
| 1.3.6.1.4.1.81.28.1.3.5.1.4 | ColumnscGenGroupDot1xCurrentNumAuthenticatedSupplicant | read-only | mandatory | The total number of authenticated supplicants connected in the specific group. |
| 1.3.6.1.4.1.81.28.1.3.5.1.5 | ColumnscGenGroupDot1xCurrentNumAuthenticatingSupplicant | read-only | mandatory | The total number of authenticating supplicants connected in the specific group. |
| 1.3.6.1.4.1.81.28.1.4 | NodescGenPort | |||
| 1.3.6.1.4.1.81.28.1.4.1 | TablescGenPortTable | not-accessible | mandatory | Table of attributes which define general configuration information about a single SC based port. |
| 1.3.6.1.4.1.81.28.1.4.1.1 | RowscGenPortEntry | not-accessible | mandatory | An entry in the table, containing data about a single Port. |
| 1.3.6.1.4.1.81.28.1.4.1.1.1 | ColumnscGenPortGroupId | read-only | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.28.1.4.1.1.2 | ColumnscGenPortId | read-only | mandatory | Unique Id of the port in the scEthPortTable. |
| 1.3.6.1.4.1.81.28.1.4.1.1.3 | ColumnscGenPortVLAN | read-write | mandatory | The Virtual LAN number of the Port. The value 0 means Generic ( But can communicate with Global !). The value '255' means Global. |
| 1.3.6.1.4.1.81.28.1.4.1.1.4 | ColumnscGenPortPriority | read-write | mandatory | The priority level of the packets send by the Port. |
| 1.3.6.1.4.1.81.28.1.4.1.1.5 | ColumnscGenPortSetDefaults | read-write | mandatory | Set all port parameters in the XSwitch module, to their default values. This item is used for ports that are managed by Sub-agents. This item will always retur… |
| 1.3.6.1.4.1.81.28.1.4.1.1.6 | ColumnscGenPortBackbone | read-only | mandatory | The type of the Xswitch port. 'on' indicates that the port was discovered by VIDP as backbone port. |
| 1.3.6.1.4.1.81.28.1.4.1.1.7 | ColumnscGenPortCopyMode | read-write | mandatory | Enable /Disable the Copy Port mode in the Sub-Agent. |
| 1.3.6.1.4.1.81.28.1.4.1.1.8 | ColumnscGenPortCopyDestination | read-write | mandatory | The destination of the copied information. The destination can be another port or the Agent acting as an RMON probe. The value of this item is: LSB Byte= sniff… |
| 1.3.6.1.4.1.81.28.1.4.1.1.9 | ColumnscGenPortLinkAggregationNumber | read-write | mandatory | The Link Aggregation Group (LAG) number, to which the Port belongs. The value 0 means that this port is not part of a LAG. This is also the default. |
| 1.3.6.1.4.1.81.28.1.4.1.1.10 | ColumnscGenPortSendBridgedPackets | read-write | mandatory | When set to on(1), the port will transmit to the line bridged frames (for which their secondary VLAN was 0xFFE internally). This is the case for ports connecte… |
| 1.3.6.1.4.1.81.28.1.4.1.1.11 | ColumnscGenPortVLANEgressStaticConfiguration | read-write | mandatory | A bitmap defining the VLANs, for which the port is member in their Egress Tables. The first bit is for VLAN 0, the second bit for VLAN 1, and so on. If the por… |
| 1.3.6.1.4.1.81.28.1.4.1.1.12 | ColumnscGenPortStaticVLANBinding | read-write | mandatory | This object defines whether Static VLAN Binding is enabled or disabled on the port. If enabled, the port is member in the Egress List of the VLANs, as specifie… |
| 1.3.6.1.4.1.81.28.1.4.1.1.13 | ColumnscGenPortSecId | read-only | mandatory | The identification number (per module) of the switching chip to which the port belongs. |
| 1.3.6.1.4.1.81.28.1.4.1.1.14 | ColumnscGenPortMaxLagsOnSec | read-only | mandatory | The theoretic maximum number of LAGs that can be defined over the switching chip to which the port belongs. The value is fixed according to the switching chip … |
| 1.3.6.1.4.1.81.28.1.4.1.1.15 | ColumnscGenPortGenericTrap | read-write | mandatory | The value of this attribute determines whether or not the agent sends the snmp generic traps 2 and 3, for link down/up events on this port. |
| 1.3.6.1.4.1.81.28.1.4.1.1.16 | ColumnscGenPortLACPMode | read-write | mandatory | The value of this attribute determines whether the port exchanges LACPDU messages, in agreement with the scGenGroupLACPMode MIB. |
| 1.3.6.1.4.1.81.28.1.4.1.1.17 | ColumnscGenPortLastIntruderSourceAddr | read-only | mandatory | Ethernet source address of the last intrusion attempt at this port. The value of this item will be 000000 (a string of 6 zeros) if security mode is disable or … |
| 1.3.6.1.4.1.81.28.1.4.1.1.18 | ColumnscGenPortSecurityMode | read-write | mandatory | Security mode assigned to this port. nonSecurityMode - do not perform intrusion control security mechanism on this port. securityMode - perform intrusion contr… |
| 1.3.6.1.4.1.81.28.1.4.1.1.19 | ColumnscGenPortSTA | read-write | mandatory | Enable /Disable the Spanning Tree protocol for this port, meaningless when disabled at the switch level via the scGenSwitchSTA MIB. |
| 1.3.6.1.4.1.81.28.1.4.1.1.20 | ColumnscGenPortLagCapability | read-only | mandatory | An octet string with the size of the maximum number of LAGs on the device. Each bit represents a LAG which the port may be associated with (a member of). |
| 1.3.6.1.4.1.81.28.1.4.1.1.21 | ColumnscGenPortCapability | read-only | mandatory | Port capability bit mask, where each bit represent the capability of the port: Bit #1 - 10Mbps speed support Bit #2 - 100Mbps speed support Bit #3 - 1000Mbps s… |
| 1.3.6.1.4.1.81.28.1.4.1.1.22 | ColumnscGenPortSLDAdminStatus | read-write | mandatory | Sets the admin status of each port in the Self Loop Discovery application A port which is disbaled does not send LDDU . A port which is enabled sends LDDU and … |
| 1.3.6.1.4.1.81.28.1.4.1.1.23 | ColumnscGenPortSLDStatus | read-only | mandatory | A port which is SLDEnabled can be in SelfLoop or NoSelfLoop mode . if the port is SLD disabled it will return notSupported. |
| 1.3.6.1.4.1.81.28.1.4.1.1.24 | ColumnscGenPortCopyClassModuleLevel | read-only | mandatory | This variable indicates the class of each kind of port on any kind of module for COPY PORT command at the module level. This MIB is defined for module level co… |
| 1.3.6.1.4.1.81.28.1.4.1.1.25 | ColumnscGenPortCopyClassStackLevel | read-only | mandatory | The first bit of this string indicates whether the requested port may be copied to another port in the stack or not. When a module is requested to copy a port … |
| 1.3.6.1.4.1.81.28.1.4.2 | TablescGenPortRspTable | not-accessible | mandatory | Table of attributes which define general configuration information about a single SC based port. |
| 1.3.6.1.4.1.81.28.1.4.2.1 | RowscGenPortRspEntry | not-accessible | mandatory | An entry in the table, containing data about a single Port. |
| 1.3.6.1.4.1.81.28.1.4.2.1.1 | ColumnscGenPortRspGroupId | read-only | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.28.1.4.2.1.2 | ColumnscGenPortRspId | read-only | mandatory | Unique Id of the port in the scGenPortRspTable. |
| 1.3.6.1.4.1.81.28.1.4.2.1.3 | ColumnscGenPortRspMode | read-write | mandatory | Sets the mode of the port from the RSP-application perspective. Possible modes are: Regular - means that this is a regular port that does not participate in th… |
| 1.3.6.1.4.1.81.28.1.4.3 | TablescGenPortSecureMACTable | not-accessible | mandatory | Table of Secure MAC list for a single SC based port. |
| 1.3.6.1.4.1.81.28.1.4.3.1 | RowscGenPortSecureMACEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.3.1.1 | ColumnscGenPortSecureGroupID | read-only | mandatory | Unique Id of the group in the scGenGroupSecureMACTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.4.3.1.2 | ColumnscGenPortSecurePortId | read-only | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.3.1.3 | ColumnscGenPortSecureMAC | read-only | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.3.1.4 | ColumnscGenPortSecureMACStatus | read-write | mandatory | This variable defines the status of the row. The values of this variables are defined and handled, according to the definitions in the IETF draft: Row creation… |
| 1.3.6.1.4.1.81.28.1.4.4 | TablescGenPortDot1xMACTable | not-accessible | mandatory | Table of 802.1x multi/single supplicant MACs connected to a single SC based port. |
| 1.3.6.1.4.1.81.28.1.4.4.1 | RowscGenPortDot1xMACEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.4.1.1 | ColumnscGenPortDot1xMACGroupID | read-only | mandatory | Unique Id of the group in the scGenGroupDot1xMACTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.4.4.1.2 | ColumnscGenPortDot1xMACPortId | read-only | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.4.1.3 | ColumnscGenPortDot1xMAC | read-only | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.4.1.4 | ColumnscGenPortDot1xMACAuthPaeState | read-only | mandatory | The current value of the 802.1x multi/single supplicant MAC/port state machine. The MIB is identical to the dot1xAuthPaeState from IEEE8021-PAE-MIB. |
| 1.3.6.1.4.1.81.28.1.4.4.1.5 | ColumnscGenPortDot1xMACAuthBackendAuthState | read-only | mandatory | The current state of the Backend Authentication state machine for the relevant 802.1x multi/single supplicant MAC/port. The MIB is identical to the dot1xAuthBa… |
| 1.3.6.1.4.1.81.28.1.4.4.1.6 | ColumnscGenPortDot1xAuthAuthControlledPortStatus | read-only | mandatory | The current value of the controlled 802.1x single-supplicant MAC status parameter for the MAC. The MIB is identical to the dot1xAuthAuthControlledPortStatus fr… |
| 1.3.6.1.4.1.81.28.1.4.5 | TablescGenPortDot1xPortTable | not-accessible | mandatory | Table of 802.1x multi-supplicant configuration and status of a single SC based port. |
| 1.3.6.1.4.1.81.28.1.4.5.1 | RowscGenPortDot1xPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.5.1.1 | ColumnscGenPortDot1xPortGroupID | not-accessible | mandatory | Unique Id of the group in the scGenGroupDot1xPortTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.1.4.5.1.2 | ColumnscGenPortDot1xPortPortId | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.28.1.4.5.1.3 | ColumnscGenPortDot1xPortMode | read-write | mandatory | The authentication method used for the port. Port-Based-Authentication is used for the standard single supplicant mode. MAC-Based-Authentication is used for th… |
| 1.3.6.1.4.1.81.28.1.4.5.1.4 | ColumnscGenPortDot1xPortNumSupplicants | read-only | mandatory | Total number of supplicants connected to the port. |
| 1.3.6.1.4.1.81.28.1.4.5.1.5 | ColumnscGenPortDot1xPortNumAuthenticatedSupplicants | read-only | mandatory | Total number of authenticated supplicants connected to the port. |
| 1.3.6.1.4.1.81.28.1.4.5.1.6 | ColumnscGenPortDot1xPortNumAuthenticatingSupplicants | read-only | mandatory | Total number of authenticating supplicants connected to the port. I.e. clients which are not authenticated yet. |
| 1.3.6.1.4.1.81.28.1.5 | NodescGenSwitch | |||
| 1.3.6.1.4.1.81.28.1.5.1 | TablescGenSwitchTable | not-accessible | mandatory | Table of attributes which define information about a single XSwitch in SC based devices. |
| 1.3.6.1.4.1.81.28.1.5.1.1 | RowscGenSwitchEntry | not-accessible | mandatory | An entry in the table, containing data about a single XSwitch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.1 | ColumnscGenSwitchId | read-only | mandatory | Index which identifies the XSwitch for which this entry contains information. This value is never greater than chNumberOfXSwitches. |
| 1.3.6.1.4.1.81.28.1.5.1.1.2 | ColumnscGenSwitchCopyMode | read-write | mandatory | Enable /Disable the Copy Port mode in the XSwitch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.3 | ColumnscGenSwitchCopySource | read-write | mandatory | The port in the switch that is being copied. All received and transmit packets on the port( including local traffic ) are copied to the defined destination, be… |
| 1.3.6.1.4.1.81.28.1.5.1.1.4 | ColumnscGenSwitchCopyDestination | read-write | mandatory | The destination of the copied information. The destination can be another port or the Agent acting as an RMON probe. The value of this item is: 1024*S+P, where… |
| 1.3.6.1.4.1.81.28.1.5.1.1.5 | ColumnscGenSwitchSetDefaults | read-write | mandatory | Set all port parameters in the XSwitch, to their default values. This item will always return a value of off(2), since it acts like a toggle switch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.6 | ColumnscGenSwitchVIDP | read-write | mandatory | Enable /Disable the VIDP protocol supported in the XSwitch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.7 | ColumnscGenSwitchType | read-only | mandatory | This attribute defines the type of the Xswitch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.8 | ColumnscGenSwitchMasterId | read-only | mandatory | This attribute defines which module in the Xswitch take the role of the Master. It is equal to the slot number of the Xswitch Master. |
| 1.3.6.1.4.1.81.28.1.5.1.1.9 | ColumnscGenSwitchReset | read-write | mandatory | Setting this attribute to `on' will cause a reset to the Xswitch. Default value is 'off'. |
| 1.3.6.1.4.1.81.28.1.5.1.1.10 | ColumnscGenSwitchNumberOfLoads | read-only | mandatory | This attribute identifies the total number of loads of that Xswitch. There is a maximum budget of 30 loads on an single Xswitch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.11 | ColumnscGenSwitchAgVLAN | read-write | mandatory | The Virtual LAN number of the Agent's internal interface in the switch. The value 0 means Generic (But can communicate with Global !). The value '255' means Gl… |
| 1.3.6.1.4.1.81.28.1.5.1.1.12 | ColumnscGenSwitchVLANList | read-only | mandatory | A bitmap defining the status of the virtual LANs in the Virtual LAN Table. The first bit is for Virtual LAN 0, the second for Virtual LAN 1, and so on. If the … |
| 1.3.6.1.4.1.81.28.1.5.1.1.13 | ColumnscGenSwitchSTA | read-write | mandatory | Enable /Disable the Spanning Tree protocol support in the switch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.14 | ColumnscGenSwitchSecurityMode | read-write | mandatory | This item defines the Security mode per stack. nonSecurityMode - all ports in the stack are not secure. securityMode - all ports in the stack are secure accord… |
| 1.3.6.1.4.1.81.28.1.5.1.1.15 | ColumnscGenSwitchFindQuery | read-write | mandatory | An address to be searched for by the Agent. The Agent will start look for the address when the value is different than Null. The string format is: 1st byte: ad… |
| 1.3.6.1.4.1.81.28.1.5.1.1.16 | ColumnscGenSwitchFindResult | read-only | mandatory | The search result. The result string format is: 1st byte: address type - 0=MAC, 1=IP. Next bytes: the address. (for MAC: next 6 bytes, for IP: next 4 bytes) 7-… |
| 1.3.6.1.4.1.81.28.1.5.1.1.17 | ColumnscGenSwitchSWRdChange | read-write | mandatory | A 4-byte octet-string indicating a change performed by the SW Redundancy task. The string will include: Byte 1: Group1 (module number). Byte 2 : Port1 Byte 3 :… |
| 1.3.6.1.4.1.81.28.1.5.1.1.18 | ColumnscGenSwitchDefaultVLAN | read-only | mandatory | Attribute describing the Default VLAN configuration on the switch ports. The user may change the value of this parameter through the setup terminal. Vlan1 is t… |
| 1.3.6.1.4.1.81.28.1.5.1.1.19 | ColumnscGenSwitchVLANBridging | read-write | mandatory | VLAN Bridging mode should be enabled in all Xswitches in the network, when the user wants to support network-wide VLAN Bridging. VLAN Bridging should also be e… |
| 1.3.6.1.4.1.81.28.1.5.1.1.20 | ColumnscGenSwitchOldVersionModules | read-only | mandatory | A list of modules, in ASCII format, that have older software versions than necessary in the switch. Module numbers are separated by a comma and a space. It is … |
| 1.3.6.1.4.1.81.28.1.5.1.1.21 | ColumnscGenSwitchVIDPNonSupportedModules | read-only | mandatory | A list of modules, in ASCII format, that do not support the VIDP function. Module numbers are separated by a comma and a space. It is used to inform the user o… |
| 1.3.6.1.4.1.81.28.1.5.1.1.22 | ColumnscGenSwitchSTANonSupportedModules | read-only | mandatory | A list of modules, in ASCII format, that do not support the STA function. Module numbers are separated by a comma and a space. It is used to inform the user on… |
| 1.3.6.1.4.1.81.28.1.5.1.1.23 | ColumnscGenSwitchIDSNonSupportedModules | read-only | mandatory | A list of modules, in ASCII format, that do not support the IDS function. Module numbers are separated by a comma and a space. It is used to inform the user on… |
| 1.3.6.1.4.1.81.28.1.5.1.1.24 | ColumnscGenSwitchMcFilter | read-write | mandatory | Enable/disable the multicast filtering mechanism supported in the switch |
| 1.3.6.1.4.1.81.28.1.5.1.1.25 | ColumnscGenSwitchMcFilterHostAgingTime | read-write | mandatory | The Value of the Host-Aging-Time parameter used by the multicast filtering mechanism for aging learned multicast filtering information |
| 1.3.6.1.4.1.81.28.1.5.1.1.26 | ColumnscGenSwitchMcFilterRouterAgingTime | read-write | mandatory | The Value of the Router-Aging-Time parameter used by the multicast filtering mechanism for aging learned router-ports information |
| 1.3.6.1.4.1.81.28.1.5.1.1.27 | ColumnscGenSwitchMcFilterDelayTime | read-write | mandatory | The Value of the Delay-Time parameter used by the multicast filtering mechanism for waiting to all registration requests before applying a filter on a specific… |
| 1.3.6.1.4.1.81.28.1.5.1.1.28 | ColumnscGenSwitchLACPMode | read-write | mandatory | The value of this attribute determines whether LACPDU messages can be exchanged by the switch's ports. If enabled, the ports will exchange LACPDU messages acco… |
| 1.3.6.1.4.1.81.28.1.5.1.1.29 | ColumnscGenSwitchSecurityModePermit | read-write | mandatory | This item defines the Security mode per switch. This MIB is encoded in AVAYA specific security mechanism. |
| 1.3.6.1.4.1.81.28.1.5.1.1.30 | ColumnscGenSwitchFastAgingOnRemoteTopChg | read-write | mandatory | This item defines if the switch performs fast aging on the MAC address forwarding database (or reset the cam contents) upon reception of Topology Change BPDU f… |
| 1.3.6.1.4.1.81.28.1.5.1.1.31 | ColumnscGenSwitchGigaMode | read-write | mandatory | The value of this attribute determines the setting for the two Giga links of a P130 stack. |
| 1.3.6.1.4.1.81.28.1.5.1.1.32 | ColumnscGenSwitchCAMClear | read-write | mandatory | When value sets to on(1), the switch clears its CAM table. This item will always return a value of off(2), since it acts like a toggle switch. |
| 1.3.6.1.4.1.81.28.1.5.1.1.33 | ColumnscGenSwitchWelcomeMessage | read-write | mandatory | The textual message of the welcome message that should be displayed upon power on or telneting to the system. |
| 1.3.6.1.4.1.81.28.1.5.1.1.34 | ColumnscGenSwitchPromptMessage | read-write | mandatory | The textual message of the Prompt message that should be displayed. |
| 1.3.6.1.4.1.81.28.1.5.1.1.35 | ColumnscGenSwitchMacAging | read-write | mandatory | Enable/Disable filtering database entries (MAC) aging |
| 1.3.6.1.4.1.81.28.1.5.1.1.36 | ColumnscGenSwitchSecurityAction | read-write | mandatory | Specifies global security violation action. Drop - drop intruder packets for 5 seconds. dropAndNotify - Drop and notify. shutdownAndNotify - Administratively D… |
| 1.3.6.1.4.1.81.28.1.5.1.1.37 | ColumnscGenSwitchDot1xPortMaxSuppNum | read-write | mandatory | Maximum number of supplicant allowed per port. Possible values 1-8. DEFAULT is 2. |
| 1.3.6.1.4.1.81.28.1.5.1.1.38 | ColumnscGenSwitchDot1xLldpTxVlanName | read-write | mandatory | This MIB item includes additional information for the extension of 802.1x multi-supplicant mode and LLDP application. If this MIB is Enable and if there was au… |
| 1.3.6.1.4.1.81.28.1.6 | NodescGenLinkAggregation | |||
| 1.3.6.1.4.1.81.28.1.6.1 | TablescGenLinkAggregationTable | not-accessible | mandatory | Table of attributes which define Link Aggregation Group in a single switch. |
| 1.3.6.1.4.1.81.28.1.6.1.1 | RowscGenLinkAggregationEntry | not-accessible | mandatory | An entry in the table, containing LAG information in a single switch. |
| 1.3.6.1.4.1.81.28.1.6.1.1.1 | ColumnscGenLinkAggregationId | read-only | mandatory | The Link Aggregation number for which this entry contains information. |
| 1.3.6.1.4.1.81.28.1.6.1.1.2 | ColumnscGenLinkAggregationName | read-write | mandatory | The Link Aggregation name, given by the user. |
| 1.3.6.1.4.1.81.28.1.6.1.1.3 | ColumnscGenLinkAggregationBasePortGroupId | read-write | mandatory | The slot/unit number of the Base Port for this Link Aggregation. |
| 1.3.6.1.4.1.81.28.1.6.1.1.4 | ColumnscGenLinkAggregationBasePortId | read-write | mandatory | The port number in the slot/unit of the Base Port for this Link Aggregation. |
| 1.3.6.1.4.1.81.28.1.6.1.1.5 | ColumnscGenLinkAggregationNumberOfPorts | read-only | mandatory | The current number of ports that belong to this Link Aggregation. |
| 1.3.6.1.4.1.81.28.1.6.1.1.6 | ColumnscGenLinkAggregationLogicalPortGroupId | read-only | mandatory | The slot number of the logical port, representing this Link Aggregation. All parameters for the LAG are managed through that logical port. |
| 1.3.6.1.4.1.81.28.1.6.1.1.7 | ColumnscGenLinkAggregationLogicalPortId | read-only | mandatory | The logical port number in the slot, representing this Link Aggregation. All parameters for the LAG are managed through that logical port. |
| 1.3.6.1.4.1.81.28.1.6.1.1.8 | ColumnscGenLinkAggregationFunctionalStatus | read-only | mandatory | The functional status of the LAG: ok(1) - fully functional LAG, transmitting and receiving packets on all its ports. fail(2) - all ports in the LAG are not in … |
| 1.3.6.1.4.1.81.28.1.6.1.1.9 | ColumnscGenLinkAggregationAutoNegResults | read-only | mandatory | The auto-negotiation results for speed and duplex for the LAG ports: ok(1) - all ports resolved the same speed and duplex mode after auto-negotiation process. … |
| 1.3.6.1.4.1.81.28.1.6.1.1.10 | ColumnscGenLinkAggregationFaultMask | read-only | mandatory | Each bit of this item describes the situation of the LAG regarding specific fault: bit 1: on indicates 'LAG connection lost' when scGenLinkAggregationFunctiona… |
| 1.3.6.1.4.1.81.28.1.6.1.1.11 | ColumnscGenLinkAggregationStatus | read-write | mandatory | The status of this scGenLinkAggregation entry. According to RMON-2 standard (RFC 2021). |
| 1.3.6.1.4.1.81.28.1.7 | NodescGenPortIPAddressRsp | |||
| 1.3.6.1.4.1.81.28.1.7.1 | TablescGenPortIPAddressRspTable | not-accessible | mandatory | Table of attributes which define general configuration information about a single SC based port. |
| 1.3.6.1.4.1.81.28.1.7.1.1 | RowscGenPortIPAddressRspEntry | not-accessible | mandatory | An entry in the table, containing data about a single Port. |
| 1.3.6.1.4.1.81.28.1.7.1.1.1 | ColumnscGenPortIPAddressRspGroupId | read-only | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.28.1.7.1.1.2 | ColumnscGenPortIPAddressRspPortId | read-only | mandatory | Unique Id of the port in the scGenPortRspTable. |
| 1.3.6.1.4.1.81.28.1.7.1.1.3 | ColumnscGenPortIPAddressRspIpAddressIndex | read-only | mandatory | Unique Id of the port in the scGenPortRspTable. |
| 1.3.6.1.4.1.81.28.1.7.1.1.4 | ColumnscGenPortIPAddressRspIpAddress | read-write | mandatory | This MIB-item sets an IpAddress of a station that is connected to a port that performs RSP. A value of 0.0.0.0 in this Mib Item means that it does not describe… |
| 1.3.6.1.4.1.81.28.2 | NodescEth | |||
| 1.3.6.1.4.1.81.28.2.1 | NodescEthPort | |||
| 1.3.6.1.4.1.81.28.2.1.1 | TablescEthPortTable | not-accessible | mandatory | Table of attributes which define configuration, performance and error information about ethernet ports based on the switchChip. |
| 1.3.6.1.4.1.81.28.2.1.1.1 | RowscEthPortEntry | not-accessible | mandatory | An entry in the table, containing data about a single port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.1 | ColumnscEthPortGroupId | read-only | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.28.2.1.1.1.2 | ColumnscEthPortId | read-only | mandatory | Unique Id of the port in the scEthPortTable. |
| 1.3.6.1.4.1.81.28.2.1.1.1.3 | ColumnscEthPortOctetsRec | read-only | mandatory | The total number of good octets received and bad octets filtered by the port (excluding framing bits but including FCS octets). This item is the summation of s… |
| 1.3.6.1.4.1.81.28.2.1.1.1.4 | ColumnscEthPortPktsRec | read-only | mandatory | The total number of good packets received and bad packets filtered by the port. This item is the summation of scEthPortGoodPktsRec and scEthPortBadPkts. |
| 1.3.6.1.4.1.81.28.2.1.1.1.5 | ColumnscEthPortGoodBroadcastPktsRec | read-only | mandatory | The total number of good packets received that were directed to the broadcast address. |
| 1.3.6.1.4.1.81.28.2.1.1.1.6 | ColumnscEthPortGoodMulticastPktsRec | read-only | mandatory | The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a… |
| 1.3.6.1.4.1.81.28.2.1.1.1.7 | ColumnscEthPortCRCAlignErrors | read-only | mandatory | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were no… |
| 1.3.6.1.4.1.81.28.2.1.1.1.8 | ColumnscEthPortOversizePkts | read-only | mandatory | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.81.28.2.1.1.1.9 | ColumnscEthPortFragments | read-only | mandatory | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.81.28.2.1.1.1.10 | ColumnscEthPortJabber | read-only | mandatory | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and were not an integral number of o… |
| 1.3.6.1.4.1.81.28.2.1.1.1.11 | ColumnscEthPortCollisions | read-only | mandatory | The best estimate of the total number of collisions on this Ethernet segment. |
| 1.3.6.1.4.1.81.28.2.1.1.1.12 | ColumnscEthPortPkts64Octets | read-only | mandatory | The total number of packets (including error packets) that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.81.28.2.1.1.1.13 | ColumnscEthPortPkts65to127Octets | read-only | mandatory | The total number of packets (including error packets) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.81.28.2.1.1.1.14 | ColumnscEthPortPkts128to255Octets | read-only | mandatory | The total number of packets (including error packets) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets… |
| 1.3.6.1.4.1.81.28.2.1.1.1.15 | ColumnscEthPortPkts256to511Octets | read-only | mandatory | The total number of packets (including error packets) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets… |
| 1.3.6.1.4.1.81.28.2.1.1.1.16 | ColumnscEthPortPkts512to1023Octets | read-only | mandatory | The total number of packets (including error packets) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octet… |
| 1.3.6.1.4.1.81.28.2.1.1.1.17 | ColumnscEthPortPkts1024to1518Octets | read-only | mandatory | The total number of packets (including error packets) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octe… |
| 1.3.6.1.4.1.81.28.2.1.1.1.18 | ColumnscEthPortGoodPktsRec | read-only | mandatory | The total number of good packets received by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.19 | ColumnscEthPortBadPkts | read-only | mandatory | The total number of bad packets filtered by the port. This item is the summation of: scEthPortCRCAlignErrors, scEthPortOversizePkts, scEthPortFragments and scE… |
| 1.3.6.1.4.1.81.28.2.1.1.1.20 | ColumnscEthPortGoodOctetsRec | read-only | mandatory | The total number of good octets of data received by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.21 | ColumnscEthPortBadOctets | read-only | mandatory | The total number of bad octets of data filtered by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.22 | ColumnscEthPortGoodBroadcastOctetsRec | read-only | mandatory | The total number of good octets received that were directed to the broadcast address. |
| 1.3.6.1.4.1.81.28.2.1.1.1.23 | ColumnscEthPortGoodMulticastOctetsRec | read-only | mandatory | The total number of good octets received that were directed to a multicast address. Note that this number does not include octets directed to the broadcast add… |
| 1.3.6.1.4.1.81.28.2.1.1.1.24 | ColumnscEthPortGoodOctetsSent | read-only | mandatory | The total number of good octets of data sent by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.25 | ColumnscEthPortGoodPktsSent | read-only | mandatory | The total number of good packets sent by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.26 | ColumnscEthPortLateCollisions | read-only | mandatory | The best estimate of the total number of late collisions on this Ethernet segment. |
| 1.3.6.1.4.1.81.28.2.1.1.1.27 | ColumnscEthPortFunctionalStatus | read-only | mandatory | The functional status of the port: ok(1) - fully functional port, transmitting and receiving packets. rld(2) - receive link down condition on the port - Indica… |
| 1.3.6.1.4.1.81.28.2.1.1.1.28 | ColumnscEthPortMode | read-write | mandatory | The flow control mode of the port when operated in full duplex: halfDuplex(1) - Half duplex connection, standard mode for segment fullDuplexNoPause(2) - Full d… |
| 1.3.6.1.4.1.81.28.2.1.1.1.29 | ColumnscEthPortSpeed | read-write | mandatory | This parameter defines the port speed: ethernet(1) and fastEthernet(2). |
| 1.3.6.1.4.1.81.28.2.1.1.1.30 | ColumnscEthPortAutoNegotiation | read-write | mandatory | This object define if the Auto Sense /Auto Negotiation process is enable(1) or disable (2) for modules that don't support the Auto Snese mode please define the… |
| 1.3.6.1.4.1.81.28.2.1.1.1.31 | ColumnscEthPortAutoNegotiationStatus | read-only | mandatory | This object define the status of the Auto Negotiation process: pass: The Auto negotiation process was completed and succeeded . fail: The Auto Negotiation proc… |
| 1.3.6.1.4.1.81.28.2.1.1.1.32 | ColumnscEthPortTotalOctets | read-only | mandatory | The total number of octets received and transmitted on the port (including all good and bad). This item is the summation of scEthPortOctetsRec and scEthPortGoo… |
| 1.3.6.1.4.1.81.28.2.1.1.1.33 | ColumnscEthPortTotalPkts | read-only | mandatory | The total number of packets received and transmitted on the port (including all good and bad). This item is the summation of scEthPortPktsRec and scEthPortGood… |
| 1.3.6.1.4.1.81.28.2.1.1.1.34 | ColumnscEthPortDropEvents | read-only | mandatory | The total number of events in which the probe could not count packets due to lack of resources. This number is not necessarily the number of packets dropped; i… |
| 1.3.6.1.4.1.81.28.2.1.1.1.35 | ColumnscEthPortGigaPauseStatus | read-only | mandatory | Indicates the status of the Flow Control as determined in the Auto Negotiation process on the Gigabit ports: noPause(1) indicates that there is no Flow Control… |
| 1.3.6.1.4.1.81.28.2.1.1.1.36 | ColumnscEthPortLower32OctetsRec | read-only | mandatory | Lower 32 bit conter of the total number of octets of data received by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.37 | ColumnscEthPortUpper32OctetsRec | read-only | mandatory | Upper 32 bit conter of the total number of octets of data received by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.38 | ColumnscEthPortLower32OctetsSent | read-only | mandatory | Lower 32 bit conter of the total number of octets of data sent by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.39 | ColumnscEthPortUpper32OctetsSent | read-only | mandatory | Upper 32 bit conter of the total number of octets of data sent by the port. |
| 1.3.6.1.4.1.81.28.2.1.1.1.40 | ColumnscEthPortGoodUnicastPktsRec | read-only | mandatory | The total number of good packets received that were directed to a unicast address. |
| 1.3.6.1.4.1.81.28.2.1.1.1.41 | ColumnscEthPortDiscardPktsRec | read-only | mandatory | The total number of packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer prot… |
| 1.3.6.1.4.1.81.28.2.1.1.1.42 | ColumnscEthPortUnicastPktsSent | read-only | mandatory | The total number of good packets sent by the port that were directed to a unicast address. |
| 1.3.6.1.4.1.81.28.2.1.1.1.43 | ColumnscEthPortDiscardPktsSent | read-only | mandatory | The total number of packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason f… |
| 1.3.6.1.4.1.81.28.2.1.1.1.44 | ColumnscEthPortPauseCapabilities | read-write | mandatory | The Pause capabilities of a Giga port that should be advertised to the link partner when performing auto-negotiation: noFlowControl (1) - no flow control suppo… |
| 1.3.6.1.4.1.81.28.2.1.1.1.45 | ColumnscEthPortMulticastPktsSent | read-only | mandatory | The total number of good packets sent by the port that were directed to a multicast address. |
| 1.3.6.1.4.1.81.28.2.1.1.1.46 | ColumnscEthPortUndersizePktsRec | read-only | mandatory | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.81.28.2.1.1.1.47 | ColumnscEthPortFlowControl | read-write | mandatory | The flow control mode of the port |
| 1.3.6.1.4.1.81.28.2.2 | NodescEthGroup | |||
| 1.3.6.1.4.1.81.28.2.2.1 | TablescEthGroupTable | not-accessible | mandatory | Table of attributes which define ethernet configuration information about a single SC based group. |
| 1.3.6.1.4.1.81.28.2.2.1.1 | RowscEthGroupEntry | not-accessible | mandatory | An entry in the table, containing data about a single Group. |
| 1.3.6.1.4.1.81.28.2.2.1.1.1 | ColumnscEthGroupId | read-only | mandatory | Unique Id of the group in the scEthGroupTable. Equals the number of the slot by which the group is accessed. |
| 1.3.6.1.4.1.81.28.2.2.1.1.2 | ColumnscEthGroupAutoPartitionEnable | read-write | mandatory | Enables/Disables the Auto-Partition mechanism in all ports of this module. |
| 1.3.6.1.4.1.81.28.2.2.1.1.3 | ColumnscEthGroupFefiEnable | read-write | mandatory | This item enables\disables the FEFI mechanism of all Fast-Ethernet PHY's in the module. It enables\disables both the transmission and the recognition of FEFI s… |
| 1.3.6.1.4.1.81.28.2.2.1.1.4 | ColumnscPowerEthGroupInlineSWversion | read-only | mandatory | Indicates the Powerinline image version of the groupID module. |
| 1.3.6.1.4.1.81.28.3 | NodescPowerEth | |||
| 1.3.6.1.4.1.81.28.3.1 | TablescPowerEthGroupTable | not-accessible | mandatory | Table of attributes which define general configuration information about a single SC based port. |
| 1.3.6.1.4.1.81.28.3.1.1 | RowscPowerEthGroupEntry | not-accessible | mandatory | An entry in the table, containing data about a single Port. |
| 1.3.6.1.4.1.81.28.3.1.1.1 | ColumnscPowerEthGroupId | read-only | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.28.3.1.1.2 | ColumnscPowerEthGroupPsePSPowerFaultErrMsg | read-only | mandatory | Free text informing a main power failure. |
| 1.3.6.1.4.1.81.28.3.1.1.3 | ColumnscPowerEthGroupPseDetectionProcess | read-write | mandatory | This object specifies the detection process used by PD. Resistive investigates the line for resistive type load, Capacitive investigates the line for a capacit… |
| 1.3.6.1.4.1.81.28.3.2 | TablescPowerEthPortTable | not-accessible | mandatory | Table of additional information about PoE ports. |
| 1.3.6.1.4.1.81.28.3.2.1 | RowscPowerEthPortEntry | not-accessible | mandatory | An entry in the table, containing data about a single Port. |
| 1.3.6.1.4.1.81.28.3.2.1.1 | ColumnscPowerEthPortGroupId | not-accessible | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.28.3.2.1.2 | ColumnscPowerEthPortPortId | not-accessible | mandatory | Id of the port in the relevant group. |
| 1.3.6.1.4.1.81.28.3.2.1.3 | ColumnscPowerEthPortConsumptionPower | read-only | mandatory | Indicates the amount of power consumption in mWatts for the specific port. |
| 1.3.6.1.4.1.81.28.4 | NodescPriorityQueuing | |||
| 1.3.6.1.4.1.81.28.4.1 | TablescPriorityQueuingTable | not-accessible | mandatory | The Priority Queuing table controls the queuing mode of the switch ports. This table is arranged by module so that the queuing parameters are set on per module… |
| 1.3.6.1.4.1.81.28.4.1.1 | RowscPriorityQueuingEntry | not-accessible | mandatory | An entry in the table, containing data about a single module. |
| 1.3.6.1.4.1.81.28.4.1.1.1 | ColumnscPriorityQueuingModuleID | read-only | mandatory | Module number - position of a module in the stack or a slot within a modular chassis. |
| 1.3.6.1.4.1.81.28.4.1.1.2 | ColumnscPriorityQueuingNumberOfQueues | read-only | mandatory | Number of Priority queues supported by corrsponding module. |
| 1.3.6.1.4.1.81.28.4.1.1.3 | ColumnscPriorityQueuingExpediteWRRFlg | read-only | mandatory | When yes - supports an expedite queuing mode. In expedite mode the highest priority queue is serviced until it is empty and only then WRR queues are served. |
| 1.3.6.1.4.1.81.28.4.1.1.4 | ColumnscPriorityQueuingModeControl | read-write | mandatory | Queuing operational mode. Strict - in strict mode the low priority egress queues are serviced only after the higher priority queue is emptied. WRR mode - the e… |
| 1.3.6.1.4.1.81.28.4.1.1.5 | ColumnscPriorityQueuingDefaultControl | read-write | mandatory | Setting this value to on(1) returns queuing mode to default values. Should return off(2)if the default values are overwritten. Activating Default control affec… |
| 1.3.6.1.4.1.81.28.4.1.1.6 | ColumnscPriorityQueuingWRRWeights | read-write | mandatory | The array of weights ordered by weight for priority 0 in position 1 and weight for priority 7 is in position 8. The number of elements in the array should matc… |