ZHNWIRELESS
123 objects
This file defines the private Enterprise MIB extensions that define Wireless configuration and status objects supported by the Zhone ZNID CPEs.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| Zhone | zhoneWtn |
| Zhone-TC | ZhoneRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.2.5.46 | IdentityzhnWireless | This file defines the private Enterprise MIB extensions that define Wireless configuration and status objects supported by the Zhone ZNID CPEs. | ||
| 1.3.6.1.4.1.5504.2.5.46.1 | NodezhnWirelessObjects | |||
| 1.3.6.1.4.1.5504.2.5.46.1.1 | TablewlBaseCfgTable | not-accessible | current | Table of basic Wireless Adapter Configuration objects. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1 | RowwlBaseCfgEntry | not-accessible | current | Table of entries of basic Wireless Adapter Configuration objects. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.1 | ColumnwlBaseCfgIndex | not-accessible | current | Basic wireless adapter interface index. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.2 | ColumnwlBaseCfgEnable | read-write | current | Enable or disable the wireless adapter. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.3 | ColumnwlBaseCfgBand | read-only | current | Broadcast band (e.g. 2.4GHz operation). |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.4 | ColumnwlBaseCfgChannel | read-write | current | The configured wifi channel number or 'auto' for automatic selection of a channel with low interference. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.5 | ColumnwlBaseCfgCurrentChannel | read-only | current | The actual wifi channel number in use. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.6 | ColumnwlBaseCfgBandwidth | read-only | current | Aggregate radio bandwidth. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.7 | ColumnwlBaseCfgAutoScanTimer | read-write | current | When configured for auto mode, this timer value specifies how often to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan … |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.8 | ColumnwlBaseCfgMimoNEwc | read-write | current | Radio 802.11n Enhanced Wireless Consortium (EWC) mode: auto(1) disable(2) |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.9 | ColumnwlBaseCfgMimoNRate | read-write | current | The configured Multiple Input Multiple Output (MIMO) 802.11n rate. Enumeration of: auto(1), use54g(2), rate6Dot5(3), rate13(4), rate19Dot5(5), rate26(6), rate3… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.10 | ColumnwlBaseCfgMimoNProtection | read-write | current | Multiple Input Multiple Output(MIMO) 802.11n protection mode. Enumeration of: off(1), auto(2), |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.11 | ColumnwlBaseCfgNClientsOnly | read-write | current | Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.12 | ColumnwlBaseCfg54gRate | read-write | current | The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use54g(2).… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.13 | ColumnwlBaseCfgMulticastRate | read-write | current | The rate for multicast traffic. Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.14 | ColumnwlBaseCfgBasicRate | read-write | current | The rate when the radio is operating in basic 802.11b/g mode. Enumeration of: default(1), all(2), rate1And2(3), stdRates(4) |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.15 | ColumnwlBaseCfgFragThreshold | read-write | current | The threshold at which packets are fragmented. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.16 | ColumnwlBaseCfgRTSThreshold | read-write | current | The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuri… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.17 | ColumnwlBaseCfgDTIMInterval | read-write | current | The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for tranmis… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.18 | ColumnwlBaseCfgBeaconInterval | read-write | current | The interval at which Beacons are generated. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.19 | ColumnwlBaseCfgGlobalMaxClients | read-write | current | The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all clients on all … |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.20 | ColumnwlBaseCfgXPress | read-write | current | Enable or disable the XPress(TM) Technology. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.21 | ColumnwlBaseCfgTxPowerPercent | read-write | current | The percentage of total power that should be used for data transmissions. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.22 | ColumnwlBaseCfgWMMEnable | read-write | current | Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.23 | ColumnwlBaseCfgWMMNoAck | read-write | current | Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowl… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.24 | ColumnwlBaseCfgWMMApsd | read-write | current | Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.25 | ColumnwlBaseCfgWpsAddClientMethod | read-write | current | Configure the method of adding Clients: pushButton(1), accessPointPIN(2), stationPIN(3) |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.26 | ColumnwlBaseCfgWpsApMode | read-only | current | Enable or disable WiFi Protected Setup (WPS) AP mode. If your provider is using an external registrar for security, select true(1). The PIN for AP mode is spec… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.27 | ColumnwlBaseCfgWpsConfigAp | read-only | current | Start AP configuration. If your provider is using an external registrar for security, wlBaseCfgWpsApMode then select true(1) to begin the registration process … |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.28 | ColumnwlBaseCfgWpsDevicePIN | read-only | current | Device PIN provided by external registrar. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.29 | ColumnwlBaseCfgWpsAddEnrollee | read-only | current | Start AP configuration. If wlBaseCfgWpsAddClientMethod is set for pushButton(1), then the user must simultaneously push the WPS button on the rear panel of the… |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.30 | ColumnwlBaseCfgWpsStationPIN | read-only | current | Station PIN provided by user. |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.31 | ColumnwlBaseCfgBridgeRestrictMode | read-write | current | Configure the bridge restriction mode: enable(1), enableScan(2), disable(3), |
| 1.3.6.1.4.1.5504.2.5.46.1.1.1.32 | ColumnwlBaseCfgBridgeRefresh | read-only | current | Scans for any wireless bridge devices in range and displays them in the Remote Bridge MAC Address table. Selecting true(1) will update the wireless bridge devi… |
| 1.3.6.1.4.1.5504.2.5.46.1.2 | TablewlVirtualIntfTable | not-accessible | current | Table of Wireless Virtual LAN Interface Configuration, Status and Statistics objects. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1 | RowwlVirtualIntfEntry | not-accessible | current | Entries in Wireless Vitrual LAN Interface Table. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.1 | ColumnwlVirtualIndex | not-accessible | current | Basic access point interface index. Guest (or Virtual) access points begin with index = 2. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.2 | ColumnwlVirtualHide | read-write | current | Enable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.3 | ColumnwlVirtualAPIsolation | read-write | current | Enable or disable the isolation of clients by enabling or disabling secure forwarding mode. This will preventpreventing one client from sending packets directl… |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.4 | ColumnwlVirtualDisableWme | read-write | current | Enable or disable the Wireless Multi-Media mode. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.5 | ColumnwlVirtualEnableWmf | read-write | current | Enable or disable Wireless Multicast Forwarding. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.6 | ColumnwlVirtualSsid | read-write | current | Configure the Primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to the virtual wireless interfaces. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.7 | ColumnwlVirtualBssMacAddr | read-only | current | MAC Address assigned to the primary SSID. |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.8 | ColumnwlVirtualCountryCode | read-only | current | Two character country code. The country code is automatically configured based upon the model number of the unit. All countries with 100mW EIRP maximum transmi… |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.9 | ColumnwlVirtualMaxClients | read-write | current | Maximum number of client devices that may be simultaneously connected to this SSID. The maximum clients value assigned to each access points must not exceed th… |
| 1.3.6.1.4.1.5504.2.5.46.1.2.1.10 | ColumnwlVirtualEnable | read-write | current | Enable or disable a single Wireless Virtual LAN Interface |
| 1.3.6.1.4.1.5504.2.5.46.1.3 | TablewlSecurityTable | not-accessible | current | Table of Wireless Security Configuration, Status and Statistics objects for virtual LAN interfaces. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1 | RowwlSecurityEntry | not-accessible | current | Table of entries, per virtual LAN interface, of Wireless Security objects. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.1 | ColumnwlSecuritySsid | read-only | current | The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.2 | ColumnwlSecurityWps | read-only | current | Enable or disable WiFi Protected Setup (WPS) security method. If WPS is disabled, the network authentication method, the data encryption, and network key shoul… |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.3 | ColumnwlSecurityAuthMode | read-write | current | Configure the network authentication method: mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9) |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.4 | ColumnwlSecurityWpaPsk | read-write | current | WPA/WPAI Passphrase. This field cannot contain a SPACE and is returned as a string of asterisks. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.5 | ColumnwlSecurityWpaGTKRekey | read-write | current | WPA Group Rekey Interval. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.6 | ColumnwlSecurityWpaMode | read-write | current | WPA/WAPI Encryption mode: tkip(1), aes(2), tkipAes(3) |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.7 | ColumnwlSecurityWepStatus | read-write | current | Status of Wireless Encryption Protocol (WEP) encryption: disabled(1) enabled(2) |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.8 | ColumnwlSecurityRadiusServerIP | read-write | current | IP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.9 | ColumnwlSecurityRadiusPort | read-write | current | UDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS). |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.10 | ColumnwlSecurityRadiusKey | read-write | current | Remote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.11 | ColumnwlSecurityWepKey | read-write | current | Security encryption strength: bit64(1) bit128(2) |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.12 | ColumnwlSecurityCurrentWepKeyIndex64 | read-write | current | Index into array of 64-bit encryption keys. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.13 | ColumnwlSecurityCurrentWepKeyIndex128 | read-write | current | Index into array of 128-bit encryption keys. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.14 | ColumnwlSecurityWep64Key1 | read-write | current | WEP 64-bit encryption key 1 string, which must consist of 5 ASCII characters or 10 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.15 | ColumnwlSecurityWep64Key2 | read-write | current | WEP 64-bit encryption key 2 string, which must consist of 5 ASCII characters or 10 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.16 | ColumnwlSecurityWep64Key3 | read-write | current | WEP 64-bit encryption key 3 string, which must consist of 5 ASCII characters or 10 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.17 | ColumnwlSecurityWep64Key4 | read-write | current | WEP 64-bit encryption key 4 string, which must consist of 5 ASCII characters or 10 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.18 | ColumnwlSecurityWep128Key1 | read-write | current | WEP 128-bit encryption key 1 string, which must consist of 13 ASCII characters or 26 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.19 | ColumnwlSecurityWep128Key2 | read-write | current | WEP 128-bit encryption key 2 string, which must consist of 13 ASCII characters or 26 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.20 | ColumnwlSecurityWep128Key3 | read-write | current | WEP 128-bit encryption key 3 string, which must consist of 13 ASCII characters or 26 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.21 | ColumnwlSecurityWep128Key4 | read-write | current | WEP 128-bit encryption key 4 string, which must consist of 13 ASCII characters or 26 hexadecimal digits. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.22 | ColumnwlSecurityWpa2Preauth | read-write | current | Enable or disable WPA2 pre-authentication. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.23 | ColumnwlSecurityWpa2NetReauth | read-write | current | Configure the WPA2 network re-authentication time, in seconds. |
| 1.3.6.1.4.1.5504.2.5.46.1.3.1.24 | ColumnwlSecurityMACFilterMode | read-write | current | Configure the MAC Filter mode. The MAC Filter rules defined in the wlMACFilterTable will be ignored when this object is set to disable(3). |
| 1.3.6.1.4.1.5504.2.5.46.1.4 | TablewlMACFilterTable | not-accessible | current | Table of Wireless MAC filter rules for a virtual wireless interface. The MAC Filter table contains a list of MAC addresses for devices that are permitted to co… |
| 1.3.6.1.4.1.5504.2.5.46.1.4.1 | RowwlMACFilterEntry | not-accessible | current | Entries in the Wireless MAC filter rules for a virtual wireless interface. |
| 1.3.6.1.4.1.5504.2.5.46.1.4.1.1 | ColumnwlMACFilterIndex | not-accessible | current | The Wireless MAC filter table index. |
| 1.3.6.1.4.1.5504.2.5.46.1.4.1.2 | ColumnwlMACFilterSsid | read-only | current | The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface. |
| 1.3.6.1.4.1.5504.2.5.46.1.4.1.3 | ColumnwlMACFilterMacAddr | read-only | current | The MAC address which to apply to the filter rule. |
| 1.3.6.1.4.1.5504.2.5.46.1.4.1.4 | ColumnwlMACFilterIfName | read-only | current | The virtual interface name to which this rule applies. |
| 1.3.6.1.4.1.5504.2.5.46.1.4.1.5 | ColumnwlMACFilterRowStatus | read-create | current | The SNMP RowStatus of the current row. When creating a new MAC Filter entry for a virtual wireless interface, only the MAC Address must be specified. The wlVir… |
| 1.3.6.1.4.1.5504.2.5.46.1.5 | TablewlStaticWdsMACAddrTable | not-accessible | current | Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. |
| 1.3.6.1.4.1.5504.2.5.46.1.5.1 | RowwlStaticWdsMACAddrEntry | not-accessible | current | Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. |
| 1.3.6.1.4.1.5504.2.5.46.1.5.1.1 | ColumnwlStaticWdsMACIndex | not-accessible | current | The index into the static WDS Remote MAC Address table for a wireless LAN interface. |
| 1.3.6.1.4.1.5504.2.5.46.1.5.1.2 | ColumnwlStaticWdsRemoteMACAddr | read-write | current | The MAC address that is permitted WDS bridge access to the wireless LAN interface. |
| 1.3.6.1.4.1.5504.2.5.46.1.6 | TablewlScanWdsMACAddrTable | not-accessible | current | Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. |
| 1.3.6.1.4.1.5504.2.5.46.1.6.1 | RowwlScanWdsMACAddrEntry | not-accessible | current | Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. |
| 1.3.6.1.4.1.5504.2.5.46.1.6.1.1 | ColumnwlScanWdsMACIndex | not-accessible | current | The index into the WDS scanned table of Remote MAC Addresses that may access a wireless LAN interface. |
| 1.3.6.1.4.1.5504.2.5.46.1.6.1.2 | ColumnwlScanWdsRemoteMACAddr | read-only | current | The MAC address previously scanned that is permitted WDS bridge access to the wireless LAN interface. |
| 1.3.6.1.4.1.5504.2.5.46.1.7 | TablewlAuthStationsTable | not-accessible | current | Table of authenicated wireless stations and their status information. |
| 1.3.6.1.4.1.5504.2.5.46.1.7.1 | RowwlAuthStationsEntry | not-accessible | current | Table of authenicated wireless stations and their status information. |
| 1.3.6.1.4.1.5504.2.5.46.1.7.1.1 | ColumnwlAuthStationIndex | not-accessible | current | The index into the Authentication Stations table. |
| 1.3.6.1.4.1.5504.2.5.46.1.7.1.2 | ColumnwlAuthStationMACAddr | read-only | current | The MAC address of the authenticated station. |
| 1.3.6.1.4.1.5504.2.5.46.1.7.1.3 | ColumnwlAuthStationAssociationStatus | read-only | current | True if the station has been associated. |
| 1.3.6.1.4.1.5504.2.5.46.1.7.1.4 | ColumnwlAuthStationAuthorizationStatus | read-only | current | True if the station has been authorized. |
| 1.3.6.1.4.1.5504.2.5.46.1.7.1.5 | ColumnwlAuthStationSSID | read-only | current | SSID with which the station has authenticated. |
| 1.3.6.1.4.1.5504.2.5.46.1.7.1.6 | ColumnwlAuthStationInterface | read-only | current | Interface through which the station has authenticated. |
| 1.3.6.1.4.1.5504.2.5.46.2 | NodezhnWirelessConformance | |||
| 1.3.6.1.4.1.5504.2.5.46.2.1 | NodezhnWirelessGroups | |||
| 1.3.6.1.4.1.5504.2.5.46.2.1.1 | GroupzhnWlBaseCfgGroup | current | A collection of Zhone Wireless objects that describe the WLAN adapter basic configuration and status information. | |
| 1.3.6.1.4.1.5504.2.5.46.2.1.2 | GroupzhnWlVirtualCfgGroup | current | A collection of Zhone Wireless objects that describe the WLAN virtual interface configuration and status information. | |
| 1.3.6.1.4.1.5504.2.5.46.2.1.3 | GroupzhnWlSecurityGroup | current | A collection of Zhone Wireless objects that describe the WLAN virtual interface security information. | |
| 1.3.6.1.4.1.5504.2.5.46.2.1.4 | GroupzhnWlMACFilterGroup | current | A collection of Zhone Wireless objects that describe the WLAN MAC filter rules. | |
| 1.3.6.1.4.1.5504.2.5.46.2.1.5 | GroupzhnWlStaticWdsMACAddrGroup | current | A collection of Zhone Wireless objects that describe the WLAN statically configured WDS MAC addresses. | |
| 1.3.6.1.4.1.5504.2.5.46.2.1.6 | GroupzhnWlScanWdsMACAddrGroup | current | A collection of Zhone Wireless objects that describe the WLAN WDS Scanned MAC addresses. | |
| 1.3.6.1.4.1.5504.2.5.46.2.1.7 | GroupzhnWlAuthStationsGroup | current | A collection of Zhone Wireless objects that indentify the stations that have authenticated with the Access Point. | |
| 1.3.6.1.4.1.5504.2.5.46.2.2 | NodezhnWirelessCompliances | |||
| 1.3.6.1.4.1.5504.2.5.46.2.2.1 | CompliancezhnWirelessCompliance | current | The Compliance statement for SNMP entities which manage the Zhone CPE Wireless Configuration, Status and Statistics Information |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Wl54gMulticastRates | INTEGER { rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12), auto(13) } | current | Supported 802.11g and multicast rates, in Mbps. |
| WlAuthenticationModes | INTEGER { mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9) } | current | WPA Mode |
| WlBasicRates | INTEGER { default(1), all(2), rate1And2(3), stdRates(4) } | current | Supported basic 802.11b/g rates, in Mbps. |
| WlBridgeAPModes | INTEGER { accessPoint(1), wirelessBridge(2) } | current | Wireless Bridge Modes of operation |
| WlBridgeRestrictModes | INTEGER { enable(1), enableScan(2), disable(3) } | current | Wireless Bridge Restriction Modes of operation |
| WlChannelSelections | INTEGER { channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11), channel12(12), channel13(13), auto(14) } | current | Broadcast channel selections. |
| WlCountryCodes | OCTET STRING (SIZE(2)) | current | Two-character country code: AF AL DZ AS AO AI AG AR AM AW AU AT AZ BS BH BD BB BY BE BZ BJ BM BT BO BA BW BR IO BN BG BF BI KH CM CA CV KY CF TD CL CN CX CO KM CG CD CR CI HR CU CY CZ DK DJ DM DO EC EG SV GQ ER EE ET FK… |
| WlMACFilterModes | INTEGER { allow(1), deny(2), disable(3) } | current | MAC Filter Modes |
| WlMimoNEwcModes | INTEGER { auto(1), disabled(2) } | current | 802.11n MIMO EWC modes of operation. |
| WlMimoNProtectionModes | INTEGER { off(1), auto(2) } | current | 802.11n MIMO protection modes. |
| WlMimoNRates | INTEGER { auto(1), use54g(2), rate6Dot5M(3), rate13M(4), rate19Dot5M(5), rate26M(6), rate39M(7), rate52M(8), rate58Dot5M(9), rate65M(10), rate78M(11), rate104M(12), rate117M(13), rate130M(14) } | current | Supported 802.11n MIMO rates, in Mbps. |
| WlSecurityKeyCodes | INTEGER { bit64(1), bit128(2) } | current | WEP Encryption strength code |
| WlWepModes | INTEGER { disabled(1), enabled(2) } | current | WEP mode. |
| WlWpaModes | INTEGER { tkip(1), aes(2), tkipAes(3) } | current | WPA Mode |
| WlWpsAddClientMethod | INTEGER { pushButton(1), accessPointPIN(2), stationPIN(3) } | current | WPS Add Client Method |