ZHONE-CARD-DIAGNOSTICS-MIB
41 objects
Contains the diagnostics and results available on a per card or resource basis.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime |
| Zhone | zhoneCard zhoneModules zhoneShelfIndex zhoneSlotIndex |
| Zhone-TC | ZhoneDiagAction ZhoneDiagResult ZhoneRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.3.3.5 | TablezhoneCardDiagNextTable | not-accessible | current | Augment table of the unit/card resource but specific to the diagnostic results information. This card contains the index to create diagnostics table entries (z… |
| 1.3.6.1.4.1.5504.3.3.5.1 | RowzhoneCardDiagNextEntry | not-accessible | current | This is the card diagnostics next index table which contains all the data for: - index for creating next zhoneCardDiagEntry. |
| 1.3.6.1.4.1.5504.3.3.5.1.1 | ColumnzhoneCardDiagNextIndex | read-only | current | We allow ten diagnostic requests from multiple interfaces. The diagNextIndex represents the next available diagnostic request handle for requesting a diagnosti… |
| 1.3.6.1.4.1.5504.3.3.6 | TablezhoneCardDiagTable | not-accessible | current | Augment table of the unit/card resource but specific to the diagnostic results information. This is the card diagnostics table which contains all the data for … |
| 1.3.6.1.4.1.5504.3.3.6.1 | RowzhoneCardDiagEntry | not-accessible | current | This is the card diagnostics table which contains all the data for: - invoking diagnostics, - obtaining diagnostic results. |
| 1.3.6.1.4.1.5504.3.3.6.1.1 | ColumnzhoneCardDiagIndex | not-accessible | current | We allow ten diagnostic requests from multiple interfaces. The diagIndex represents the diagnostic request to start a diagnostic or obtain test results for a c… |
| 1.3.6.1.4.1.5504.3.3.6.1.2 | ColumnzhoneCardDiagType | read-create | current | This field specifies the diagnostic to execute. The default value is 'selftest'. NOTE: not all of the individual diagnostics are available on every Zhone card … |
| 1.3.6.1.4.1.5504.3.3.6.1.3 | ColumnzhoneCardDiagAction | read-create | current | The diagAction field represents the diagnostic operation to execute. Current supported actions are as follows: diagStart : begin diagnostics and initialize res… |
| 1.3.6.1.4.1.5504.3.3.6.1.4 | ColumnzhoneCardDiagRepetition | read-create | current | This field specifies the number of repetitions of diagnostics to execute. The default value is 1. NOTE: this field operates as an OR with the diagDuration fiel… |
| 1.3.6.1.4.1.5504.3.3.6.1.5 | ColumnzhoneCardDiagDuration | read-create | current | This field specifies the duration of diagnostics to execute. The default value is 60 seconds. NOTE: this field operates as an OR with the diagRepetition field.… |
| 1.3.6.1.4.1.5504.3.3.6.1.6 | ColumnzhoneCardDiagResult | read-only | current | This represents the overall diagnostic result. |
| 1.3.6.1.4.1.5504.3.3.6.1.7 | ColumnzhoneCardDiagPassCount | read-only | current | The number of diagnostics that executed successfully. |
| 1.3.6.1.4.1.5504.3.3.6.1.8 | ColumnzhoneCardDiagFailCount | read-only | current | The number of diagnostics that have failed. |
| 1.3.6.1.4.1.5504.3.3.6.1.9 | ColumnzhoneCardDiagDetails | read-only | current | The failure reason, if any, for the last diagnostic which has executed. NOTE: An empty string indicates that no additional information is available. |
| 1.3.6.1.4.1.5504.3.3.6.1.10 | ColumnzhoneCardDiagStartTime | read-only | current | Starting date and time of last selftest execution. |
| 1.3.6.1.4.1.5504.3.3.6.1.11 | ColumnzhoneCardDiagEndTime | read-only | current | Ending date and time of last selftest execution. |
| 1.3.6.1.4.1.5504.3.3.6.1.12 | ColumnzhoneCardDiagRowStatus | read-create | current | In any case where a new row can be created either via the cli or zms there will always be a proprietary mib entity of type ZhoneRowStatus which has the basic e… |
| 1.3.6.1.4.1.5504.3.3.7 | TablezhoneTacTestTable | not-accessible | current | This table contains one entry for each tac test channel available on Zhone devices. In the initial release only the primary channel (1) is supported. Future li… |
| 1.3.6.1.4.1.5504.3.3.7.1 | RowzhoneTacTestEntry | not-accessible | current | One row per tac test channel. |
| 1.3.6.1.4.1.5504.3.3.7.1.1 | ColumnzhoneTacIndex | not-accessible | current | This field is the index field for the tac test channel which will be connected on the external port. This device supports a maximum of two channels, one or bot… |
| 1.3.6.1.4.1.5504.3.3.7.1.2 | ColumnzhoneTacInterfaceIndex | read-write | current | This field contains the InterfaceIndex of the physical line to be tested. If no line is currently being tested this value is 0. The ability of a physical line … |
| 1.3.6.1.4.1.5504.3.3.7.1.3 | ColumnzhoneTacTestMode | read-write | current | This field is used to set the mtac test mode for a given line. The options are: mtacModeBridge - All traffic on the given line is bridged across the mtac lines… |
| 1.3.6.1.4.1.5504.3.3.7.1.4 | ColumnzhoneTacTestId | read-write | current | This object is only valid for Tac Cards which support the new Legerity Suite of tests. This object identifies which test is to be run, or can be set to abort t… |
| 1.3.6.1.4.1.5504.3.3.7.1.5 | ColumnzhoneTacTestParam1 | read-write | current | Optional Test Parameter #1 |
| 1.3.6.1.4.1.5504.3.3.7.1.6 | ColumnzhoneTacTestParam2 | read-write | current | Optional Test Paramerter #2 |
| 1.3.6.1.4.1.5504.3.3.7.1.7 | ColumnzhoneTacTestParam3 | read-write | current | Optional Test Parameter #3 |
| 1.3.6.1.4.1.5504.3.3.7.1.8 | ColumnzhoneTacTestParam4 | read-write | current | Optional Test Parameter #4 |
| 1.3.6.1.4.1.5504.3.3.7.1.9 | ColumnzhoneTacTestParam5 | read-write | current | Optional Test Parameter #5 Value: 0x00000001 Force Line-Test mode |
| 1.3.6.1.4.1.5504.3.3.12 | TablezhoneTacTestResultsTable | not-accessible | current | Table of Tac Test Results objects. Indexed by same index as zhoneTacTestTable. This table is only valid for Tac cards which support the Legerity Suite of tests. |
| 1.3.6.1.4.1.5504.3.3.12.1 | RowzhoneTacTestResultsEntry | not-accessible | current | Entry of Test Results objects. Indexed by same index as zhoneTacTestEntry. This entry is only valid for Tac cards which support the Legerity Suite of tests. |
| 1.3.6.1.4.1.5504.3.3.12.1.1 | ColumnzhoneTacTestResultsTimeStarted | read-only | current | Description. |
| 1.3.6.1.4.1.5504.3.3.12.1.2 | ColumnzhoneTacTestResultsTimeEnded | read-only | current | Description. |
| 1.3.6.1.4.1.5504.3.3.12.1.3 | ColumnzhoneTacTestResultStatus | read-only | current | Contains test results. |
| 1.3.6.1.4.1.5504.3.3.12.1.4 | ColumnzhoneTacTestResultsOutput | read-only | current | For Legerity Test Suite, results of test(s) are output to this object as one string, separated by UNIX '/n' for newline characters and terminated by the NULL c… |
| 1.3.6.1.4.1.5504.3.3.13 | IdentityzhoneTacTestTraps | current | Traps for the tac system. | |
| 1.3.6.1.4.1.5504.3.3.13.0 | IdentityzhoneRingerTraps | current | Traps associated with ring generator. Traps should be added below - the .0 on this entry is required. | |
| 1.3.6.1.4.1.5504.3.3.13.0.1 | NotificationzhoneRingerStatusAlarm | current | This trap occurs when a ring signal fails to be detected, or when it re-starts after failure. | |
| 1.3.6.1.4.1.5504.3.3.13.0.2 | NotificationzhoneRingerBusFaultAlarm | current | This trap occurs when a fault in the ringer power bus is detected. Such fault may be caused by the possible shortage in the POTS or DSL line. | |
| 1.3.6.1.4.1.5504.6.11 | IdentityzhoneCardDiagnosticsModule | Contains the diagnostics and results available on a per card or resource basis. | ||
| 1.3.6.1.4.1.5504.6.11.1 | GroupzhoneCardDiagObjects | current | This group contains objects associated with Zhone Card Diagnostics | |
| 1.3.6.1.4.1.5504.6.11.2 | GroupzhoneTacTestObjects | current | This group contains objects associated with initiating tac tests |