ZHONE-CARD-RESOURCES-MIB
98 objects
Contains the resources utilized on a per CPU basis. Note that in a single cpu system, this data represents the entire system.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| Zhone | zhoneCard zhoneModules zhoneShelfIndex zhoneSlotIndex |
| Zhone-TC | ZhoneAdminString ZhoneCardType ZhoneDiagAction |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.3.3.1 | TablecardResourceTable | not-accessible | current | A table of unit/card status and functions for each card in A BAN system. Functions include software download management. The maximum cards in a BAN is 255 shel… |
| 1.3.6.1.4.1.5504.3.3.1.1 | RowcardResourceEntry | not-accessible | current | An entry per card or a singe row for a single CPU/card system. |
| 1.3.6.1.4.1.5504.3.3.1.1.1 | ColumncardIdentification | read-only | current | Textual description of the unit/card or access device type. |
| 1.3.6.1.4.1.5504.3.3.1.1.2 | ColumncardZhoneType | read-only | current | The numerical representation of what unit/card type is present. |
| 1.3.6.1.4.1.5504.3.3.1.1.3 | ColumncardMfgSerialNumber | read-only | current | The manufacturing serial number for this unit/card. |
| 1.3.6.1.4.1.5504.3.3.1.1.4 | ColumncardMfgCLEICode | read-only | current | CLEI code for the unit/card if defined, otherwise the value will be set to zero (0) by the card. |
| 1.3.6.1.4.1.5504.3.3.1.1.5 | ColumncardMfgRevisionCode | read-only | current | Manufacturing hardware revision code for the unit/card. |
| 1.3.6.1.4.1.5504.3.3.1.1.6 | ColumncardMfgBootRevision | read-only | current | Revision level of any permenant (PROM) or semi- permenant (flash) code on the unit/card. This code is generally used as a bootstrap loader. |
| 1.3.6.1.4.1.5504.3.3.1.1.7 | ColumncardPostResults | read-only | current | Results string generated by unit/card that displays the results of the POST (power-on-self-test). The first item in the text string indicates the overall resul… |
| 1.3.6.1.4.1.5504.3.3.1.1.8 | ColumncardAdminStatus | read-write | current | Specifies the adminstrative status of the unit/card as follows: operational: the unit/card enters the operational state if able. In the operational state the u… |
| 1.3.6.1.4.1.5504.3.3.1.1.9 | ColumncardOperStatus | read-only | current | Indicates the operational status of the unit/card as follows: unknown: the card is in an unknown or error state operating: software has been loaded and is oper… |
| 1.3.6.1.4.1.5504.3.3.1.1.10 | ColumncardAdminStatsEnable | read-write | current | Enable the collection and forwarding of historical statistics on the unit/card. The default value is disabled. Note this value should be logically 'anded' with… |
| 1.3.6.1.4.1.5504.3.3.1.1.11 | ColumncardUpTime | read-only | current | The amount of time since this unit/card was last initialized (warm or full reset). The units are in 100ths of a second. |
| 1.3.6.1.4.1.5504.3.3.1.1.12 | ColumncardProcessorType | read-only | current | A string is returned that describes the processor type used on the unit/card. |
| 1.3.6.1.4.1.5504.3.3.1.1.13 | ColumncardPortStatus | read-only | current | Summary of the status of all physical ports on the unit/card. Each port is identified by it's ifTable index and the status is indicated as up|down|unknown. |
| 1.3.6.1.4.1.5504.3.3.1.1.14 | ColumncardInterfaceType | read-only | current | This field is used to identify which interface types are s upported for a given card. In the case where a card has exactly one possible interface (such as the … |
| 1.3.6.1.4.1.5504.3.3.1.1.15 | ColumncardAtmManualAal2bw | read-write | current | This field is used to configure the resources for AAL2 for both high and low priority interfaces as the percentage of total available resources. Remainder of t… |
| 1.3.6.1.4.1.5504.3.3.1.1.16 | ColumncardAtmManualAal2h | read-write | current | This field is used to configure the resources for high priorty AAL2 interface as the percentage of total bandwidth allocated for AAL2. This field will be used … |
| 1.3.6.1.4.1.5504.3.3.1.1.17 | ColumncardLineVoltage | read-write | deprecated | DEPRECATED - use zhoneSysCardLineVoltage Specifies the voltage supplied to all lines(ports) of this card. Used on ISDN line cards. |
| 1.3.6.1.4.1.5504.3.3.1.1.18 | ColumncardVpiVciRange | read-write | deprecated | DEPRECATED - use zhoneSysCardVpiVciRange. The maximum vpi and vci values that may be used for this card. |
| 1.3.6.1.4.1.5504.3.3.1.1.19 | ColumncardPweTimingMode | read-write | current | Describes PWE timing origin and mode of timing recovery: none - no reference clock required, or PWE not supported. source-differential - the local Provider Edg… |
| 1.3.6.1.4.1.5504.3.3.2 | TablecardSoftwareTable | not-accessible | current | Information about the software running on this unit(system) or card. |
| 1.3.6.1.4.1.5504.3.3.2.1 | RowcardSoftwareEntry | not-accessible | current | A augmented table of the unit resource table specific for software information. |
| 1.3.6.1.4.1.5504.3.3.2.1.1 | ColumncardSwRunningVers | read-only | current | The software version that is currently running on this card. This object complies to the Zhone software revision syntax. |
| 1.3.6.1.4.1.5504.3.3.2.1.2 | ColumncardSwUpgradeVers | read-only | current | If warm upgrade is supported, this is the version of software that is loaded on the card that will be switched to with a warm upgrade. This value is set by the… |
| 1.3.6.1.4.1.5504.3.3.2.1.3 | ColumncardSwAdmin | read-write | current | Some items are only valid if warm upgrade is supported. loadUpgradeSoftware: the unit/card should request a load of the upgrade software from the previously do… |
| 1.3.6.1.4.1.5504.3.3.2.1.4 | ColumncardSwStatus | read-only | current | The upgrade status is indicated as follows: upgradeLoadSuccessful: following the setting of cardSwAdmin to loadUpgradeSw this status indicates the load to memo… |
| 1.3.6.1.4.1.5504.3.3.3 | TablecardRuntimeTable | not-accessible | current | Augment table of the unit/card resource but specific to the runtime status information. |
| 1.3.6.1.4.1.5504.3.3.3.1 | RowcardRuntimeEntry | not-accessible | current | A row definition for the runtime software state/status. |
| 1.3.6.1.4.1.5504.3.3.3.1.1 | ColumncardPeakMemUsage | read-only | current | The maximum physical memory that has been allocated at any time by the unit/card. |
| 1.3.6.1.4.1.5504.3.3.3.1.2 | ColumncardAvailMem | read-only | current | The amount of physical memory that is unallocated and not in use by the unit/card. |
| 1.3.6.1.4.1.5504.3.3.3.1.3 | ColumncardTotalMem | read-only | current | The amount of physical memory contained by the unit/card. |
| 1.3.6.1.4.1.5504.3.3.3.1.4 | ColumncardProcessorIdle | read-only | current | Percentage of time the CPU has spent executing tasks with priority of 200 or less. Tasks with priority of 200 or less (the higher the number, the lower the pri… |
| 1.3.6.1.4.1.5504.3.3.3.1.5 | ColumncardProcessorUsage | read-only | current | Percentage of time the CPU has spent executing tasks with priority of 199 or higher. |
| 1.3.6.1.4.1.5504.3.3.3.1.6 | ColumncardMemStatus | read-only | current | Memory status of the card sent with memory trap. A trap is sent when each condition occurs. 1 - ramMemOK less then 90% of ram is used 2 - ramMemLow more then 9… |
| 1.3.6.1.4.1.5504.3.3.3.1.7 | ColumncardProcessorHighUsage | read-only | current | Percentage of time the CPU has spent executing tasks with priority of 001 to 099. |
| 1.3.6.1.4.1.5504.3.3.3.1.8 | ColumncardProcessorServicesUsage | read-only | current | Percentage of time the CPU has spent executing tasks with priority of 100 to 179. |
| 1.3.6.1.4.1.5504.3.3.3.1.9 | ColumncardProcessorFrameworkUsage | read-only | current | Percentage of time the CPU has spent executing tasks with priority of 180 to 199. |
| 1.3.6.1.4.1.5504.3.3.3.1.10 | ColumncardProcessorLowUsage | read-only | current | Percentage of time the CPU has spent executing tasks with priority of 200 to 250. |
| 1.3.6.1.4.1.5504.3.3.4 | NodezhoneCardServices | |||
| 1.3.6.1.4.1.5504.3.3.4.1 | TablecardServicesTable | not-accessible | current | This contains the table of services configured to be running on this card. The card runs services that are either customer visible (can be configured by the us… |
| 1.3.6.1.4.1.5504.3.3.4.1.1 | RowcardServicesEntry | not-accessible | current | A row in this table represents a redundant service that is running on this card. |
| 1.3.6.1.4.1.5504.3.3.4.1.1.1 | ColumncardServiceId | accessible-for-notify | current | Identifies the service. The Servide ID, together with a Service Instance, uniquely identify a service running on a particular card. |
| 1.3.6.1.4.1.5504.3.3.4.1.1.2 | ColumncardServiceInstance | accessible-for-notify | current | The instance of this service that is running on the card. For example, if multiple versions of a service is running, this will be the differentiator. In the ca… |
| 1.3.6.1.4.1.5504.3.3.4.1.1.3 | ColumncardServiceChangeTime | read-only | current | Represents the time that service entered the current cardServiceStatus. Value is in system ticks. |
| 1.3.6.1.4.1.5504.3.3.4.1.1.4 | ColumncardServiceStatus | read-only | current | The status for this particular service instance. The possible values are: unAvailable (1) - The service is unavailable for unknown reasons. This is an error si… |
| 1.3.6.1.4.1.5504.3.3.4.2 | TableactiveServicesTable | not-accessible | current | The table of active services running on the system |
| 1.3.6.1.4.1.5504.3.3.4.2.1 | RowactiveServicesEntry | not-accessible | current | A row in this table represents an active service running on a card. |
| 1.3.6.1.4.1.5504.3.3.4.2.1.1 | ColumnactiveServiceShelf | read-only | current | Identifies the shelf where the active service is running. |
| 1.3.6.1.4.1.5504.3.3.4.2.1.2 | ColumnactiveServiceSlot | read-only | current | Identifies the slot where the active service is running. |
| 1.3.6.1.4.1.5504.3.3.4.2.1.3 | ColumnactiveServiceChangeTime | read-only | current | Represents the time that service became Active. Value is in system ticks. |
| 1.3.6.1.4.1.5504.3.3.4.3 | TablestandbyServicesTable | not-accessible | current | The table of standby services running on the system |
| 1.3.6.1.4.1.5504.3.3.4.3.1 | RowstandbyServicesEntry | not-accessible | current | A row in this table represents a standby service running on a card.. |
| 1.3.6.1.4.1.5504.3.3.4.3.1.1 | ColumnstandbyServiceShelf | read-only | current | Identifies the shelf where the standby service is running. |
| 1.3.6.1.4.1.5504.3.3.4.3.1.2 | ColumnstandbyServiceSlot | read-only | current | Identifies the slot where the standby service is running. |
| 1.3.6.1.4.1.5504.3.3.4.3.1.3 | ColumnstandbyServiceChangeTime | read-only | current | Represents the time that service became Standby. Value is in system ticks. |
| 1.3.6.1.4.1.5504.3.3.4.4 | IdentityzhoneTrapCardServices | current | Traps related to Card Services | |
| 1.3.6.1.4.1.5504.3.3.4.4.0 | IdentityzhoneTrapCardServicesV2Traps | current | This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps. | |
| 1.3.6.1.4.1.5504.3.3.4.4.0.1 | NotificationzhoneCardServicesStatusChange | current | This trap is generated whenever a redundancy state change occurs. | |
| 1.3.6.1.4.1.5504.3.3.4.4.0.2 | NotificationzhoneCardServicesStandbyReady | current | This trap indicates that all services on the standby card are synchronized with their active couterparts, and that the card is fully ready as the standby. | |
| 1.3.6.1.4.1.5504.3.3.8 | IdentityzhoneExternalRelay | current | The following defines the information pertinent for external relays. | |
| 1.3.6.1.4.1.5504.3.3.8.1 | TablezhoneExternalRelayTable | not-accessible | current | A Table of External Relay Interface status for handling relays on a card and for the TAC card,this is of 12 Rows. |
| 1.3.6.1.4.1.5504.3.3.8.1.1 | RowzhoneExternalRelayEntry | not-accessible | current | One entry for each relay on a card. |
| 1.3.6.1.4.1.5504.3.3.8.1.1.1 | ColumnzhoneExternalRelayName | read-write | current | A provisionable name which may used in referring to an external relay. This external relay name should be unique on the box.If not set , it defaults to a uniqu… |
| 1.3.6.1.4.1.5504.3.3.8.1.1.2 | ColumnzhoneExternalRelayState | read-only | current | The object describes the state of the external relays. An external relay may have one of two states: relayStateOpen(1) indicates that the external relay is ope… |
| 1.3.6.1.4.1.5504.3.3.8.1.1.3 | ColumnzhoneExternalRelayNormalState | read-write | current | Specifies whether relay is normally open or normally closed. The other state will then generate an alarm. A value of not-specified is valid for MTAC and 1U car… |
| 1.3.6.1.4.1.5504.3.3.8.2 | TablezhoneExternalRelayMappingTable | not-accessible | current | This table is used to map an external relay name to the relay Id. This table contains all entries for relays defined in the system. For example, if 2 TAC cards… |
| 1.3.6.1.4.1.5504.3.3.8.2.1 | RowzhoneExternalRelayMappingEntry | not-accessible | current | One row for each relay. |
| 1.3.6.1.4.1.5504.3.3.8.2.1.1 | ColumnzhoneExternalRelayId | read-only | current | A numeric identifier which identifies the relay. |
| 1.3.6.1.4.1.5504.3.3.8.3 | IdentityzhoneTrapExternalRelay | current | Traps defined for the external relays. | |
| 1.3.6.1.4.1.5504.3.3.8.3.0 | IdentityzhoneTrapExternalRelayV2Traps | current | In order to make this a v2 trap (0). | |
| 1.3.6.1.4.1.5504.3.3.8.3.0.1 | NotificationzhoneExternalAlarmTrap | current | This trap is thrown when the state of an external TAC card relay changes. | |
| 1.3.6.1.4.1.5504.3.3.8.3.0.2 | NotificationzhoneMxkAlarmInputTrap | current | This trap is thrown when the state of an MXK I/O Alarm Card relay changes. | |
| 1.3.6.1.4.1.5504.3.3.9 | NodezhoneCardCompliances | |||
| 1.3.6.1.4.1.5504.3.3.9.1 | NodezhoneCardGroups | |||
| 1.3.6.1.4.1.5504.3.3.9.1.1 | GroupzhoneCardResourcesGroup | current | Description. | |
| 1.3.6.1.4.1.5504.3.3.9.1.2 | GroupzhoneExternalRelayGroup | current | This group contains objects associated with the zhone external relay interface. | |
| 1.3.6.1.4.1.5504.3.3.9.1.3 | GroupzhoneExternalAlarmTrapGroup | current | This group contains trap definitions associated with the external relays. | |
| 1.3.6.1.4.1.5504.3.3.10 | IdentityzhoneTrapCardMemV2Traps | current | Memory Trap | |
| 1.3.6.1.4.1.5504.3.3.10.1 | GroupzhoneTrapCardMemGroup | current | Memory trap | |
| 1.3.6.1.4.1.5504.3.3.10.2 | NotificationzhoneTrapCardMemStatus | current | Memory notification | |
| 1.3.6.1.4.1.5504.3.3.10.3 | NotificationzhoneTrapProcessorUsage | current | Notification sent when CPU Usage crosses a predetermined threshold value. | |
| 1.3.6.1.4.1.5504.3.3.11 | IdentityzrgResources | current | Description. The following defines the information pertinent for ZRG boards. | |
| 1.3.6.1.4.1.5504.3.3.11.1 | ScalarzrgBatteryRelayStatus | read-only | current | Description. The object describes the state of the ZRG board power supply. The power may have one or two states from the following states: normalMode(0) indica… |
| 1.3.6.1.4.1.5504.3.3.11.2 | IdentityzrgTrapBatteryRelay | current | Traps defined for the ZRG power source/state. | |
| 1.3.6.1.4.1.5504.3.3.11.2.0 | IdentityzrgBatterRelayTrapV2 | current | In order to make this a v2 trap (0). | |
| 1.3.6.1.4.1.5504.3.3.11.2.0.1 | NotificationzrgBatteryRelayNotification | current | Description. | |
| 1.3.6.1.4.1.5504.3.3.14 | IdentityznidResources | current | ZNID Resources. | |
| 1.3.6.1.4.1.5504.3.3.14.1 | ScalarznidBatteryStatus | accessible-for-notify | current | ZNID Battery Status object used for notification reporting. |
| 1.3.6.1.4.1.5504.3.3.14.2 | ScalarznidSerialNumber | accessible-for-notify | current | ZNID Battery Status object used for notification reporting. |
| 1.3.6.1.4.1.5504.3.3.14.3 | IdentityznidNotificationObjects | current | ZNID notification objects. | |
| 1.3.6.1.4.1.5504.3.3.14.3.0 | IdentityznidNotifications | current | ZNID notifications. | |
| 1.3.6.1.4.1.5504.3.3.14.3.0.1 | NotificationznidBatteryStatusNotification | current | ZNID battery status notification. | |
| 1.3.6.1.4.1.5504.3.3.14.3.1 | GroupznidNotificationGroup | current | ZNID notification group. | |
| 1.3.6.1.4.1.5504.3.3.14.3.2 | GroupznidOjectGroup | current | ZNID object group. | |
| 1.3.6.1.4.1.5504.6.4 | IdentityzhoneCardResourcesModule | Contains the resources utilized on a per CPU basis. Note that in a single cpu system, this data represents the entire system. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Kbytes | Integer32 (1..2147483647) | current | Memory size expressed in kilobytes (1024 bytes) |
| ZhoneServiceId | INTEGER { dspResource(1), numberService(2), tadService(3), aal2Resource(4), ctrpCallResource(5), callControlResource(6), mprrResource(7), mamaResource(8), raFtdResource(9), voiceCall(10), shelfControllerService(11), snmpMasterAgent(12), trapService(13), informationServices(14), lineResource(15), ifCfgMgrResource(16), logServer(17), cardServer(18), dhcpServer(19), filterUpdate(20), ringGenerator(21), zhoneRouteTableService(22), pppResourceProvider(23), rootDirectoryService(24), cssService(25), sipResource(26), mgcpResource(27), npRedundantServer(28) } | current | Identifer of a Zhone service. The following services are allowed: dspResource(1) DSP Resources numberService(2) Service to provide unique numbers to the system. NOT ADDED BY A USER BUT AUTOMATICALLY STARTED. tadService(… |