MIB Viewer

ZHONE-COM-IP-RIPv2-MIB

33 objects
RIPv2 MIB IP Software Minneapolis, MN
Imported Objects
SNMPv2-SMICounter32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCTEXTUAL-CONVENTION
ZhonezhoneIp zhoneModules
ZHONE-COM-IP-RD-MIBrdIndex
OIDNameAccessStatusDescription
1.3.6.1.4.1.5504.4.1.2Identityrip2currentThe MIB module to describe the RIP2 Version 2 Protocol as represented in Zhone products. The notion of a Routing Domain (RD) is used to group instances of RIP …
1.3.6.1.4.1.5504.4.1.2.1TablezhRip2GlobalTablenot-accessiblecurrentA list of global RIP values. Rows are created and destroyed whenever a routing domain is created and destroyed. Rows cannot be created or destroyed via SNMP.
1.3.6.1.4.1.5504.4.1.2.1.1RowzhRip2GlobalEntrynot-accessiblecurrentA single routing domain in a single subnet.
1.3.6.1.4.1.5504.4.1.2.1.1.1ColumnzhRip2GlobalRouteChangesread-onlycurrentThe number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
1.3.6.1.4.1.5504.4.1.2.1.1.2ColumnzhRip2GlobalQueriesread-onlycurrentThe number of responses sent to RIP queries from other systems.
1.3.6.1.4.1.5504.4.1.2.1.1.3ColumnzhRip2GlobalAdminStateread-writecurrentAn enumeration of the operational state of RIP for a RD. The possible values are either 'disabled' or 'enabled', where the operation of RIP is completely disab…
1.3.6.1.4.1.5504.4.1.2.1.1.4ColumnzhRip2GlobalUpdateTimeread-writecurrentThe time in seconds between transmissions of RIP updates on all interfaces within a RD. The default is 30 seconds, which follows RFC 1058 and subsequent RIP RF…
1.3.6.1.4.1.5504.4.1.2.2TablezhRip2IfStatTablenot-accessiblecurrentA list of subnets that require separate status monitoring in RIP. Rows are created and destroyed whenever an interface within the RD is created and destroyed. …
1.3.6.1.4.1.5504.4.1.2.2.1RowzhRip2IfStatEntrynot-accessiblecurrentA single routing domain in a single subnet.
1.3.6.1.4.1.5504.4.1.2.2.1.1ColumnzhRip2IfStatAddressnot-accessiblecurrentThe IP Address of this system on the indicated subnet. For unnumbered interfaces, a unique internal identifier is used.
1.3.6.1.4.1.5504.4.1.2.2.1.2ColumnzhRip2IfStatRcvBadPacketsread-onlycurrentThe number of RIP response packets received by the RIP process that were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command …
1.3.6.1.4.1.5504.4.1.2.2.1.3ColumnzhRip2IfStatRcvBadRoutesread-onlycurrentThe number of routes, in valid RIP packets, that were ignored for any reason (e.g. unknown address family, or invalid metric).
1.3.6.1.4.1.5504.4.1.2.2.1.4ColumnzhRip2IfStatSentUpdatesread-onlycurrentThe number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
1.3.6.1.4.1.5504.4.1.2.3TablezhRip2IfConfTablenot-accessiblecurrentA list of subnets that require separate configuration in RIP. Rows are created and destroyed whenever an interface within the RD is created and destroyed. Rows…
1.3.6.1.4.1.5504.4.1.2.3.1RowzhRip2IfConfEntrynot-accessiblecurrentA single routing domain in a single subnet.
1.3.6.1.4.1.5504.4.1.2.3.1.1ColumnzhRip2IfConfAddressnot-accessiblecurrentThe IP Address of this system on the indicated subnet. For unnumbered interfaces, a unique internal identifier is used.
1.3.6.1.4.1.5504.4.1.2.3.1.2ColumnzhRip2IfConfAuthTyperead-writecurrentThe type of Authentication used when receiving RIP packets on this interface. When set to 'noAuthentication', no authentication is performed. For 'simplePasswo…
1.3.6.1.4.1.5504.4.1.2.3.1.3ColumnzhRip2IfConfAuthKeyread-writecurrentThe value to be used as the Authentication Key whenever the corresponding instance of zhRip2IfConfAuthType has a value other than noAuthentication. A modificat…
1.3.6.1.4.1.5504.4.1.2.3.1.4ColumnzhRip2IfConfSendread-writecurrentWhat the router sends on this interface. If set to 'doNotSend', no RIP updates are sent out on this interface. If set to 'ripVersion1', RIP updates compliant w…
1.3.6.1.4.1.5504.4.1.2.3.1.5ColumnzhRip2IfConfReceiveread-writecurrentThis indicates which version of RIP updates are to be accepted. When set to 'rip1', only RIP updates compliant with RFC 1058 are received. 'rip2' specifies to …
1.3.6.1.4.1.5504.4.1.2.3.1.6ColumnzhRip2IfConfDefaultMetricread-writecurrentThis variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that n…
1.3.6.1.4.1.5504.4.1.2.3.1.7ColumnzhRip2IfConfSrcAddressread-writecurrentThe IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as ipIfAddr (from ZHONE-I…
1.3.6.1.4.1.5504.4.1.2.3.1.8ColumnzhRip2IfConfStaticRouteAdvertisementread-writecurrentThis variable specifies whether to advertise static routes. When set to 'none', no static routes are advertised. For 'low', only low preference static routes a…
1.3.6.1.4.1.5504.4.1.2.3.1.9ColumnzhRip2IfConfPoisonread-writecurrentThis variable specifies whether to send poison reverse updates on this interface. Poison reverse updates are used to prevent larger loops within the network by…
1.3.6.1.4.1.5504.4.1.2.4TablezhRip2PeerTablenot-accessiblecurrentA list of RIP Peers. A row (new peer) is created whenever an interface running RIP receives a RIP update from a new peer. The row is destroyed when the interfa…
1.3.6.1.4.1.5504.4.1.2.4.1RowzhRip2PeerEntrynot-accessiblecurrentInformation regarding a single routing peer.
1.3.6.1.4.1.5504.4.1.2.4.1.1ColumnzhRip2PeerAddressnot-accessiblecurrentThe IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system.
1.3.6.1.4.1.5504.4.1.2.4.1.2ColumnzhRip2PeerLastUpdateread-onlycurrentThe value of sysUpTime when the most recent RIP update was received from this system.
1.3.6.1.4.1.5504.4.1.2.4.1.3ColumnzhRip2PeerVersionread-onlycurrentThe RIP version number in the header of the last RIP packet received.
1.3.6.1.4.1.5504.4.1.2.4.1.4ColumnzhRip2PeerRcvBadPacketsread-onlycurrentThe number of RIP response packets from this peer discarded as invalid.
1.3.6.1.4.1.5504.4.1.2.4.1.5ColumnzhRip2PeerRcvBadRoutesread-onlycurrentThe number of routes from this peer that were ignored because the entry format was invalid.
1.3.6.1.4.1.5504.6.52IdentitycomIpRip2RIPv2 MIB IP Software Minneapolis, MN
Type Definitions
NameSyntaxStatusDescription
RipAuthKeyOCTET STRING (SIZE (0..16)) rip2 OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB module to describe the RIP2 Version 2 Protocol as represented in Zhone products. The notion of a Routing Domain (RD) is used to group instances of RIP within a system." ::= { zhoneIp 2 }currentThe RIP authentication key specification. Only the RIP mib should use this.