MIB Viewer

ZHONE-COM-VOIP-MIB

81 objects
Voice over IP configuration for Zhone products
OIDNameAccessStatusDescription
1.3.6.1.4.1.5504.4.3.4IdentityzhoneVoipVoice over IP configuration for Zhone products
1.3.6.1.4.1.5504.4.3.4.1IdentityzhoneVoipSystemdeprecatedOnly SIP-PLAR is using this profile. The regular SIP and MGCP setting is moving to Voip-Server-Entry profile.
1.3.6.1.4.1.5504.4.3.4.1.1ScalarzhoneVoipSystemProtocolread-onlydeprecatedThe signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol. Currently, the device only supp…
1.3.6.1.4.1.5504.4.3.4.1.2ScalarzhoneVoipSystemSendCallProceedingToneread-writedeprecatedIndicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch.
1.3.6.1.4.1.5504.4.3.4.1.3ScalarzhoneVoipSystemRtcpEnabledread-writedeprecatedIndicates whether the Real-Time Control Protocol is enabled for the device.
1.3.6.1.4.1.5504.4.3.4.1.4ScalarzhoneVoipSystemRtcpPacketIntervalread-writedeprecatedRTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled.
1.3.6.1.4.1.5504.4.3.4.1.5ScalarzhoneVoipSystemInterdigitTimeoutread-writedeprecatedThis parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits.
1.3.6.1.4.1.5504.4.3.4.1.6ScalarzhoneVoipSystemIpTosread-writedeprecatedThis parameter indicates the tos value that is set in the ip header for voice of ip traffic.
1.3.6.1.4.1.5504.4.3.4.1.7ScalarzhoneVoipSystemDomainNameread-onlydeprecatedThis parameter is ignored.
1.3.6.1.4.1.5504.4.3.4.2GroupzhoneVoipObjectscurrentZhone VOIP objects.
1.3.6.1.4.1.5504.4.3.4.3NodezhoneVoipSipDialPlan
1.3.6.1.4.1.5504.4.3.4.3.1ScalarnextVoipSipDialPlanIdread-onlycurrentReturns the next unused dial plan entry id.
1.3.6.1.4.1.5504.4.3.4.3.2TablezhoneVoipSipDialPlanTablenot-accessiblecurrentThis table defines a dialing plan for POTS to SIP originations. A dialing plan consists of a series of acceptable dial strings and the corresponding IP address…
1.3.6.1.4.1.5504.4.3.4.3.2.1RowzhoneVoipSipDialPlanEntrynot-accessiblecurrentAn entry in the SIP dial plan table.
1.3.6.1.4.1.5504.4.3.4.3.2.1.1ColumnzhoneVoipSipDialPlanIdnot-accessiblecurrentThe unique identifier of the dial plan entry.
1.3.6.1.4.1.5504.4.3.4.3.2.1.2ColumnzhoneVoipSipDialStringread-createcurrentA dial string against which collected digits are matched.
1.3.6.1.4.1.5504.4.3.4.3.2.1.3ColumnzhoneVoipSipDialIpAddrread-createcurrentUpon detecting a match between the collected digits and the dial string for this table entry, this IP address is used for SIP negotiations to initiate the call.
1.3.6.1.4.1.5504.4.3.4.3.2.1.4ColumnzhoneVoipSipDialPlanRowStatusread-createcurrentThe row status is used to create or delete an entry in this table.
1.3.6.1.4.1.5504.4.3.4.3.2.1.5ColumnzhoneVoipSipDialDestNameread-createcurrentName of the destination for the dial string
1.3.6.1.4.1.5504.4.3.4.3.2.1.6ColumnzhoneVoipSipDialNumOfDigitsread-createcurrentNumber of digits to wait for before initiating the call
1.3.6.1.4.1.5504.4.3.4.3.2.1.7ColumnzhoneVoipSipDialPrefixStripread-createcurrentNumber of prefix digits to strip from dialled digits
1.3.6.1.4.1.5504.4.3.4.3.2.1.8ColumnzhoneVoipSipDialPrefixAddread-createcurrentString to be added to the beginning of the dialled digits before call initiation
1.3.6.1.4.1.5504.4.3.4.3.2.1.9ColumnzhoneVoipSipDialPlanTyperead-createcurrentDialPlanType indicates the type of the dial plan. UA has to differenciate between normal dialing and dialing when call features like call park is initiated. Th…
1.3.6.1.4.1.5504.4.3.4.3.2.1.10ColumnzhoneVoipServerEntryIndexread-createcurrentAn index to associated voip-server-entry for this sip-dialplan.
1.3.6.1.4.1.5504.4.3.4.3.2.1.11ColumnzhoneVoipOverrideInterdigitTimeoutread-createcurrentThis parameter overrides the interdigit timeout in voip-system profile. It indicates the duration, in seconds, that the device will wait after each digit is en…
1.3.6.1.4.1.5504.4.3.4.3.2.1.12ColumnzhoneVoipSipDialPlanClassread-createcurrentThis parameter is used to configured the dial plan specific features.
1.3.6.1.4.1.5504.4.3.4.3.2.1.13ColumnzhoneVoipSipDialPlanDescriptionread-writecurrentThis field gives details about the sip-dialplan
1.3.6.1.4.1.5504.4.3.4.4NodezhoneVoipHuntGroup
1.3.6.1.4.1.5504.4.3.4.4.2ScalarnextZhoneVoipHuntGroupIdread-onlycurrentReturns the next unused hunt group entry id.
1.3.6.1.4.1.5504.4.3.4.4.3TablezhoneVoipHuntGroupTablenot-accessiblecurrentA hunt groups is defined to map a SIP uniform resource identifier (URI) or dirctory number (DN) to multiple DS0s, to allow a greater number of incoming calls t…
1.3.6.1.4.1.5504.4.3.4.4.3.1RowzhoneVoipHuntGroupEntrynot-accessiblecurrentAn entry in the hunt group table.
1.3.6.1.4.1.5504.4.3.4.4.3.1.1ColumnzhoneVoipHuntGroupIdnot-accessiblecurrentThe unique identifier of the hunt group entry.
1.3.6.1.4.1.5504.4.3.4.4.3.1.2ColumnzhoneVoipHuntGroupDestUriread-createcurrentThe DN (directory number) or SIP URI (uniform resource identifier) being called. This is the called party from the incoming SIP Invite message.
1.3.6.1.4.1.5504.4.3.4.4.3.1.3ColumnzhoneVoipHuntGroupDefaultCodecread-createcurrentThe default codec to use for a call to a member of this hunt group.
1.3.6.1.4.1.5504.4.3.4.4.3.1.4ColumnzhoneVoipHuntGroupPortMembersread-createcurrentIndicates which ports are contained in the hunt group.
1.3.6.1.4.1.5504.4.3.4.4.3.1.5ColumnzhoneVoipHuntGroupRowStatusread-createcurrentThe row status is used to create or delete an entry in this table.
1.3.6.1.4.1.5504.4.3.4.5NodezhoneVoipMaliciousCaller
1.3.6.1.4.1.5504.4.3.4.5.1ScalarnextVoipMaliciousCallerIdread-onlycurrenteturns the next unused malicious caller entry index
1.3.6.1.4.1.5504.4.3.4.5.2TablezhoneVoipMaliciousCallerTablenot-accessiblecurrentThis table defines a malicious caller whose call will be rejected if enabled. SIP terminal administrator needs to provision URI of this table exactly as it app…
1.3.6.1.4.1.5504.4.3.4.5.2.1RowzhoneVoipMaliciousCallerEntrynot-accessiblecurrentAn entry in the malicious caller table
1.3.6.1.4.1.5504.4.3.4.5.2.1.1ColumnzhoneVoipMaliciousCallerIdnot-accessiblecurrentThe unique identifier of the malicious call reject entry.
1.3.6.1.4.1.5504.4.3.4.5.2.1.2ColumnzhoneVoipMaliciousCallerUriread-createcurrentIncoming call from this URI will be rejected. The network operator is responsible for provisioning exactly as per appearance in the incoming session notificati…
1.3.6.1.4.1.5504.4.3.4.5.2.1.3ColumnzhoneVoipMaliciousCallerEnableread-createcurrentIndicates whether the incoming call reject is enabled
1.3.6.1.4.1.5504.4.3.4.5.2.1.4ColumnzhoneVoipMaliciousCallerRowStatusread-createcurrentThe row status is used to create or delete an entry in this table.
1.3.6.1.4.1.5504.4.3.4.6NodezhoneVoipServerCfg
1.3.6.1.4.1.5504.4.3.4.6.1TablezhoneVoipServerTablenot-accessiblecurrentTable of VOIP Server addresses applicable to each VOIP user agent within the system.
1.3.6.1.4.1.5504.4.3.4.6.1.1RowzhoneVoipServerEntrynot-accessiblecurrentAn entry within the table. Indexed by applIndex, which is the slot number, and a user specified unique number.
1.3.6.1.4.1.5504.4.3.4.6.1.1.1ColumnzhoneVoipServerAddressIndexnot-accessiblecurrentA unique identifier of a server address when multiple addresses are configured by the MGCP entity. If one address isn't reachable, then another can be tried.
1.3.6.1.4.1.5504.4.3.4.6.1.1.2ColumnzhoneVoipServerRowStatusread-createcurrentRow Status is used to create, modify or delete an entry.
1.3.6.1.4.1.5504.4.3.4.6.1.1.3ColumnzhoneVoipServerAddrTyperead-createcurrentThis object specifies the type of address contained in the associated instance of sipVoipServerAddr.
1.3.6.1.4.1.5504.4.3.4.6.1.1.4ColumnzhoneVoipServerAddrread-createcurrentThis object specifies the address of a VOIP server this user agent will use to proxy/redirect calls.
1.3.6.1.4.1.5504.4.3.4.6.1.1.5ColumnzhoneVoipServerUdpPortNumberread-createcurrentSpecifies the UDP Port number for the MGCP Gateway. 2427 is the IANA Registered MGCP Gateway port.
1.3.6.1.4.1.5504.4.3.4.6.1.1.6ColumnzhoneVoipServerIdread-createcurrentIdentifies the voip server type.
1.3.6.1.4.1.5504.4.3.4.6.1.1.7ColumnzhoneVoipServerProtocolread-createcurrentThe signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol).
1.3.6.1.4.1.5504.4.3.4.6.1.1.8ColumnzhoneVoipServerSendCallProceedingToneread-createcurrentndicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch.
1.3.6.1.4.1.5504.4.3.4.6.1.1.9ColumnzhoneVoipServerRtcpEnabledread-createcurrentIndicates whether the Real-Time Control Protocol is enabled for the device.
1.3.6.1.4.1.5504.4.3.4.6.1.1.10ColumnzhoneVoipServerRtcpPacketIntervalread-createcurrentRTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled.
1.3.6.1.4.1.5504.4.3.4.6.1.1.11ColumnzhoneVoipServerInterDigitTimeoutread-createcurrentThis parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits.
1.3.6.1.4.1.5504.4.3.4.6.1.1.12ColumnzhoneVoipServerIpTosread-createcurrentThis parameter indicates the tos value that is set in the ip header for voice of ip traffic.
1.3.6.1.4.1.5504.4.3.4.6.1.1.13ColumnzhoneVoipServerDomainNameread-createcurrentThis parameter indicates the Universal Resource Identifier (URI) of the system.
1.3.6.1.4.1.5504.4.3.4.6.1.1.14ColumnzhoneVoipServerExpiresInviteread-createcurrentFor user agent clients, this value is inserted into the Expires header. For proxy servers, if a received request contained an Expires header, then the value in…
1.3.6.1.4.1.5504.4.3.4.6.1.1.15ColumnzhoneVoipServerExpiresRegisterread-createcurrentFor user agent clients, this value is inserted into the Expires header. For registrar servers, if a received request contained an Expires header, then the valu…
1.3.6.1.4.1.5504.4.3.4.6.1.1.16ColumnzhoneVoipServerHeaderMethodread-createcurrentThis convention is a bit map. Each bit represents a SIP method where the Expires header should be included. If a bit has value 1, then the requests correspondi…
1.3.6.1.4.1.5504.4.3.4.6.1.1.17ColumnzhoneVoipServerSessionTimerread-createcurrentSupport session timers on : Session timers are supported, and SIP messages will have a 'Supported: timer' header off: Session timers are NOT supported, and SIP…
1.3.6.1.4.1.5504.4.3.4.6.1.1.18ColumnzhoneVoipServerSessionExpirationread-createcurrentThe time at which an element (proxy, UAC, UAS) will consider the SIP session timed out, if no successful session refresh transaction occurs beforehand.
1.3.6.1.4.1.5504.4.3.4.6.1.1.19ColumnzhoneVoipServerSessionMinSEread-createcurrentBecause of the processing load of mid-dialog requests, all elements (proxy, UAC, UAS) can have configured minimum value for the session interval that they are …
1.3.6.1.4.1.5504.4.3.4.6.1.1.20ColumnzhoneVoipServerSessionCallerReqTimerread-createcurrentThis field specifies the caller's action yes: Caller (UAC) will request for timer when making outbound calls no : Caller (UAC) will NOT request for timer when …
1.3.6.1.4.1.5504.4.3.4.6.1.1.21ColumnzhoneVoipServerSessionCalleeReqTimerread-createcurrentWhen caller supports timer but did not request one this field specifies the callee's action yes: Callee (UAS) will request for timer no : Callee (UAS) will NOT…
1.3.6.1.4.1.5504.4.3.4.6.1.1.22ColumnzhoneVoipServerSessionCallerSpecifyRefresherread-createcurrentCaller specifies the refresher: UAC : Caller specifies itself (UAC) as the refresher UAS : Caller specifies the callee (UAS) as the refresher Omit: Caller does…
1.3.6.1.4.1.5504.4.3.4.6.1.1.23ColumnzhoneVoipServerSessionCalleeSpecifyRefresherread-createcurrentWhen UAC did not specify refresher tag, callee specifies the refresher: UAC : Callee specifies the caller (UAC) as the refresher UAS : Callee specifies itself …
1.3.6.1.4.1.5504.4.3.4.6.1.1.24ColumnzhoneVoipServerDtmfModeread-createcurrentIndicates whether dtmf digits are to be passed as codec voice packets or special separate packets (rfc2833).
1.3.6.1.4.1.5504.4.3.4.6.1.1.25ColumnzhoneVoipServerBehaviorStringOneread-onlycurrentThis field is used to control any switch specific behavior of the VOIP Gateway.
1.3.6.1.4.1.5504.4.3.4.6.1.1.26ColumnzhoneVoipServerRtpTermIdSyntaxread-writecurrentThis field describes the Ephemeral term ID syntax for the switch. The RTP syntax varies from switch to switch.But the string should contain atleast one %eid fo…
1.3.6.1.4.1.5504.4.3.4.6.1.1.27ColumnzhoneVoipServerRtpDSCPread-createcurrentThis parameter indicates DSCP value for voip's rtp traffic. NOTE:zhoneVoipServerIpTos field must be zero before entering a new value into this field. Valid cod…
1.3.6.1.4.1.5504.4.3.4.6.1.1.28ColumnzhoneVoipServerSignalingDSCPread-createcurrentThis parameter indicates DSCP value for voip's signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11…
1.3.6.1.4.1.5504.4.3.4.6.1.1.29ColumnzhoneVoipServerDtmfPayloadIdread-writecurrentDescription.
1.3.6.1.4.1.5504.4.3.4.6.1.1.30ColumnzhoneVoipServerRegisterReadyTimeoutread-createcurrentFor Megaco Service change Messages this value will be used in service-change-delay.
1.3.6.1.4.1.5504.4.3.4.6.1.1.31ColumnzhoneVoipServerMessageRetryCountread-createcurrentThis field specifies the number of retries of SIP message to every DNS resolved server IP addresses. The default behaviour means that the SIP message will be r…
1.3.6.1.4.1.5504.4.3.4.6.1.1.32ColumnzhoneVoipServerFeaturesread-createcurrentSet of features can be enabled for voip server Bit Feature 1 sip outbound 2 gruu
1.3.6.1.4.1.5504.4.3.4.6.1.1.33ColumnzhoneVoipServerTransportProtocolread-createcurrentThis field specifies type of transport protocol configured. Possible values are udp and tcp.
1.3.6.1.4.1.5504.4.3.4.6.1.1.34ColumnzhoneVoipSigLocalPortNumberread-createcurrentThis field specifies signalling local port number, used when tcp is configured as tranport protocol.