ZHONE-INTERFACE-TRANSLATION-MIB
61 objects
Defines translation tables that provide the translation to and from shelf/slot/port/subport <-> interface number. Both table are created whenever an ifIndex is created. The ifStackDefaultTable is used to provide a roadmap of stack bindings, and to supply default ifAdminStatus values for new rows of the ifTable.
Imported Objects
| IANAifType-MIB | IANAifType |
| IF-MIB | ifEntry InterfaceIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| Zhone | zhoneInterfaceTranslation zhoneModules zhoneShelfIndex zhoneSlotIndex |
| Zhone-TC | ZhoneIfType ZhoneRowStatus ZhoneShelfValue ZhoneSlotValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.3.5.1 | ScalarifIndexNext | read-only | current | Contains the next available ifIndex. |
| 1.3.6.1.4.1.5504.3.5.2 | TablephysicalToIfIndexTable | not-accessible | deprecated | Table to translate from shelf/slot/physical port/subport to the interface number (zhoneIfIndex). The physical port is the port number on the card selected by s… |
| 1.3.6.1.4.1.5504.3.5.2.1 | RowphysicalToIfIndexEntry | not-accessible | deprecated | The physical table is indexed by shelf/slot/physical port /subport. In instances where there is no subport the value of subport should be set to zero. This ent… |
| 1.3.6.1.4.1.5504.3.5.2.1.1 | ColumnpportIndex | not-accessible | deprecated | The port number of the physical port on the card or device. The numbering should start at 1 for the first port on the device and proceed sequentially. This obj… |
| 1.3.6.1.4.1.5504.3.5.2.1.2 | ColumnsubPortIndex | not-accessible | deprecated | This entry provides flexibility to define more than one interface on a port. The most common use of subport will be to handle structured TDM lines allowing for… |
| 1.3.6.1.4.1.5504.3.5.2.1.3 | ColumnzhoneIfIndex | read-only | deprecated | The interface number of the pport or pport/subport that uniquely identifies the interface across the system. This object has been replaced by zhonePhysicalIfIn… |
| 1.3.6.1.4.1.5504.3.5.2.1.4 | ColumnxxxifTypexxx | read-only | deprecated | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.5504.3.5.3 | TableifIndexToPhysicalTable | not-accessible | current | Table to translate from interface number (zhoneIfIndex) to the physical location and port (including subport where defined). zhoneShelfNumber is the number of … |
| 1.3.6.1.4.1.5504.3.5.3.1 | RowifIndexToPhysicalEntry | not-accessible | current | The table is indexed by the zhoneIfidndex of the desired interface. |
| 1.3.6.1.4.1.5504.3.5.3.1.1 | ColumnzhoneShelfNumber | read-only | current | The zhoneShelfNumber is the physical address or number of the shelf for the desired interface. A Zhone system is limited to a maximum of 255 shelves. The first… |
| 1.3.6.1.4.1.5504.3.5.3.1.2 | ColumnzhoneSlotNumber | read-only | current | The zhoneSlotNumber is the physical slot number on which the card containing the port or interface is located. Zhone shelves are currently limited to 30 slots … |
| 1.3.6.1.4.1.5504.3.5.3.1.3 | ColumnpportNumber | read-only | current | The pportNumber defines the phyiscal port number on the selected shelf/slot (card). Port numbering begins with port 1 and ports are numbered sequentially. ppor… |
| 1.3.6.1.4.1.5504.3.5.3.1.4 | ColumnsubPortNumber | read-only | current | The subPortNumber is used to identify multiple logical ports on a physical that require their own interface number, e.g. DS1s on a DS3 port. Note that multiple… |
| 1.3.6.1.4.1.5504.3.5.3.1.5 | ColumnifaceType | read-only | current | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.5504.3.5.3.1.6 | ColumnifaceTypeExtension | read-only | current | This field is used to specify the zhone-proprietary interface type when necessary. For example, if the interface is a line-group, iftype is set to 'IANAIFTYPE_… |
| 1.3.6.1.4.1.5504.3.5.4 | TableifStackDefaultTable | not-accessible | current | This table defines the default ifTable vales and stack arrangements (bindings) and unit numbers based on types of cards and ifTypes. |
| 1.3.6.1.4.1.5504.3.5.4.1 | RowifStackDefaultEntry | not-accessible | current | This table contains the unit/card type, the ifType of the 'from' layer (ifStkDefUpperIfType) and the ifType of the 'to' layer (ifStkDefLowerIfType) and the num… |
| 1.3.6.1.4.1.5504.3.5.4.1.1 | ColumnifStkDefCardType | not-accessible | current | The numerical representation of unit/card type as specified in zhoneCardResourcesModule where cardZhoneType has the following defined values: unknownType(1), i… |
| 1.3.6.1.4.1.5504.3.5.4.1.2 | ColumnifStkDefUpperType | not-accessible | current | The value of ifType corresponding to the higher sublayer of the relationship, i.e., the sublayer that runs on top of the sublayer identified by the correspondi… |
| 1.3.6.1.4.1.5504.3.5.4.1.3 | ColumnifStkDefLowerType | not-accessible | current | The value of ifType corresponding to the default lower sublayer of the relationship, i.e., the sublayer that runs under the sublayer identified by the correspo… |
| 1.3.6.1.4.1.5504.3.5.4.1.4 | ColumnifStkDefUnits | read-create | current | Number of units for this association which indicates the number of ifindexes created for this particular iftype pair on this card type such as 48 creations for… |
| 1.3.6.1.4.1.5504.3.5.4.1.5 | ColumnifStkDefAdminStatus | read-create | current | Default value for ifAdminStatus in ifTable for the UPPPER ifindex associated with the ifStkDefUpperType. |
| 1.3.6.1.4.1.5504.3.5.4.1.6 | ColumnifStkDefRowStatus | read-create | current | Row status used to create and/or remove rows from this table. |
| 1.3.6.1.4.1.5504.3.5.5 | TableifInverseStackTable | not-accessible | current | This is the inverse ifstacktable in that the index scheme is lower.higher as opposed to higher.lower as defined in rfc2233. Comments and information is copied … |
| 1.3.6.1.4.1.5504.3.5.5.1 | RowifInverseStackEntry | not-accessible | current | The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which su… |
| 1.3.6.1.4.1.5504.3.5.5.1.1 | ColumnifInverseStackLowerLayer | not-accessible | current | The value of ifIndex corresponding to the lower sub- layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the correspo… |
| 1.3.6.1.4.1.5504.3.5.5.1.2 | ColumnifInverseStackHigherLayer | not-accessible | current | The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corr… |
| 1.3.6.1.4.1.5504.3.5.5.1.3 | ColumnifInverseStackStatus | read-only | current | Status of this entry. If the entry exists, this value must be 1. |
| 1.3.6.1.4.1.5504.3.5.6 | TablezhoneIfXTable | not-accessible | current | This table contains additional objects for the interface table. Each row corresponds to a conceptual row in the ifTable. |
| 1.3.6.1.4.1.5504.3.5.6.1 | RowzhoneIfXEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.5504.3.5.6.1.1 | ColumnphysicalFlag | read-create | current | The flag is set to 'true(1)' if the ifIndex represents the physical layer. Otherwise the flag is set to 'false(2)'. |
| 1.3.6.1.4.1.5504.3.5.6.1.2 | ColumnifTypeExtension | read-create | current | This field is used to specify the zhone-proprietary interface type when necessary. For example, if the interface is a line-group, iftype is set to 'IANAIFTYPE_… |
| 1.3.6.1.4.1.5504.3.5.6.1.3 | ColumnredundancyParam1 | read-create | current | For linegroups, this value contains information about line redundancy as follows: 0x8000 bit set => switchover on failure 0x7FFF number of seconds to wait befo… |
| 1.3.6.1.4.1.5504.3.5.6.1.4 | ColumnzhoneIfXEntryIfTypeAlias | read-create | current | This object maps to ifType object within the ifEntry table. This object is used when creating a new row in the ifEntry table since ifType is read-only. |
| 1.3.6.1.4.1.5504.3.5.6.1.5 | ColumnzhoneIfXEntryRowStatus | read-create | current | This object is used to create and delete rows within the ifEntry table since ifEntry is standard and does not have a Row Status object. Currently, only ifType … |
| 1.3.6.1.4.1.5504.3.5.6.1.6 | ColumnzhoneIfXEntryShelfAlias | read-create | current | Writeable shelf number. This object maps to the read-only object zhoneShelfNumber. |
| 1.3.6.1.4.1.5504.3.5.6.1.7 | ColumnzhoneIfXEntrySlotAlias | read-create | current | Writeable slot number. This object maps to the read-only object zhoneSlotNumber. |
| 1.3.6.1.4.1.5504.3.5.6.1.8 | ColumnzhoneIfXEntryPortAlias | read-create | current | Writeable port number. This object maps to the read-only object zhonePortNumber. |
| 1.3.6.1.4.1.5504.3.5.6.1.9 | ColumnzhoneIfXEntrySubportAlias | read-create | current | Writeable subport number. This object maps to the read-only object zhoneSubPortNumber. |
| 1.3.6.1.4.1.5504.3.5.6.1.10 | ColumnzhoneIfXDescriptionIndex | read-create | current | Index value of a zhoneDescriptionEntry. Zero indicates no reference to zhoneDescriptionEntry. |
| 1.3.6.1.4.1.5504.3.5.7 | TablezhonePhysicalToIfIndexTable | not-accessible | current | Table to translate from shelf/slot/physical port/subport/ iftype/iftype-extension to the interface number (zhonePhysicalIfIndex). The physical port is the port… |
| 1.3.6.1.4.1.5504.3.5.7.1 | RowzhonePhysicalToIfIndexEntry | not-accessible | current | The physical table is indexed by shelf/slot/physical port /subport/iftype/iftype-extension. In instances where there is no subport the value of subport should … |
| 1.3.6.1.4.1.5504.3.5.7.1.1 | ColumnzhonePortIndex | not-accessible | current | The port number of the physical port on the card or device. The numbering should start at 1 for the first port on the device and proceed sequentially. |
| 1.3.6.1.4.1.5504.3.5.7.1.2 | ColumnzhoneSubPortIndex | not-accessible | current | This entry provides flexibility to define more than one interface on a port. The most common use of subport will be to handle structured TDM lines allowing for… |
| 1.3.6.1.4.1.5504.3.5.7.1.4 | ColumnzhoneIfType | not-accessible | current | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.5504.3.5.7.1.5 | ColumnzhoneIfTypeExtension | not-accessible | current | This field is used to specify the zhone-proprietary interface type when necessary. For example, if the interface is a line-group, iftype is set to 'IANAIFTYPE_… |
| 1.3.6.1.4.1.5504.3.5.7.1.6 | ColumnzhonePhysicalIfIndex | read-only | current | The interface number of the pport or pport/subport that uniquely identifies the interface across the system. |
| 1.3.6.1.4.1.5504.3.5.8 | TablezhoneDescriptionTable | not-accessible | current | Table of description entries. |
| 1.3.6.1.4.1.5504.3.5.8.1 | RowzhoneDescriptionEntry | not-accessible | current | Descritpion entry. |
| 1.3.6.1.4.1.5504.3.5.8.1.1 | ColumnzhoneDescriptionRowStatus | read-create | current | Row status object. |
| 1.3.6.1.4.1.5504.3.5.8.1.2 | ColumnzhoneDescriptionText | read-create | current | Description object used as free format text description. Contains readable characters, with the following exclusions: 1. Double quotes 2. Carriage Returns 3. L… |
| 1.3.6.1.4.1.5504.3.5.9 | ScalarzhoneIfXDescriptionIndexNext | read-only | current | Returns the next available zhoneIfXDescriptionIndex. |
| 1.3.6.1.4.1.5504.3.5.10 | TablezhoneLineRedStatusTable | not-accessible | current | Line redundancy information |
| 1.3.6.1.4.1.5504.3.5.10.1 | RowzhoneLineRedStatusEntry | not-accessible | current | Line redundancy information for on line |
| 1.3.6.1.4.1.5504.3.5.10.1.1 | ColumnzhoneLineRedStatusFunction | read-only | current | Current redundancy function as returned from LineRR. . inactive means registered but neither active nor standby . standby means this is the protection line in … |
| 1.3.6.1.4.1.5504.3.5.10.1.2 | ColumnzhoneLineRedOpStatus | read-only | current | Line status . active means line is up as standalone or the working line in a redundant pair. . oos means line is down . trafficDisabled means up as standby . u… |
| 1.3.6.1.4.1.5504.3.5.11 | IdentityzhoneLineRedTraps | current | Traps for facility redundancy | |
| 1.3.6.1.4.1.5504.3.5.11.0 | IdentityzhoneLineRedTrapsPrefix | current | Add zero in OID for traps. | |
| 1.3.6.1.4.1.5504.3.5.11.0.1 | NotificationzhoneLineRedundancyUnsafe | current | Sent when configured peer is not traffic-disabled | |
| 1.3.6.1.4.1.5504.3.5.11.0.2 | NotificationzhoneLineRedundancySafe | current | Sent when both lines in a facility-redundant pair have become redundancy ready. | |
| 1.3.6.1.4.1.5504.6.6 | IdentityzhoneInterfaceTrans | Defines translation tables that provide the translation to and from shelf/slot/port/subport <-> interface number. Both table are created whenever an ifIndex is… |