ZHONE-ISDN-MIB
38 objects
ISDN BRI S/T Interface MIB module. This MIB manages the ISDN BRI S/T Interface on Zedge .
Imported Objects
| IF-MIB | ifIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| Zhone | zhonePhysical zhoneTrapModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.3.8.3 | IdentityzhoneIsdnTrap | current | Trap for zedge to be sent to ZMS for far end code violation. | |
| 1.3.6.1.4.1.5504.3.8.3.1 | IdentityisdnMibV2Traps | current | This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps. | |
| 1.3.6.1.4.1.5504.3.8.3.1.1 | NotificationisdnTrapFrameSynchLoss | current | When the driver receives three successive out of synch frames then it will set the frame synch loss bit to true and then the application will send a trap to th… | |
| 1.3.6.1.4.1.5504.3.8.3.1.2 | NotificationisdnTrapFECV | current | Far end code violation Trap | |
| 1.3.6.1.4.1.5504.3.8.3.1.3 | NotificationisdnTrapAmiViolations | current | Bad Ami violation Trap. If number of ami violation crosses the isdnThresholdAmiViolations then the application will send this to NMS. | |
| 1.3.6.1.4.1.5504.3.8.3.1.4 | NotificationisdnTrapUnbalancedFrame | current | This trap will be sent to NMS after the isdnThresholdUnbalancedFrame value is crossed. | |
| 1.3.6.1.4.1.5504.5.7 | IdentityzhoneIsdn | ISDN BRI S/T Interface MIB module. This MIB manages the ISDN BRI S/T Interface on Zedge . | ||
| 1.3.6.1.4.1.5504.5.7.1 | NodezhoneIsdnMib | |||
| 1.3.6.1.4.1.5504.5.7.1.1 | TableisdnConfigTable | not-accessible | current | The ISDN BRI integrated S/T Interface Configuration Table. This table is indexed by IfIndex.It is created by aplication when the system comes up with default v… |
| 1.3.6.1.4.1.5504.5.7.1.1.1 | RowisdnConfigEntry | not-accessible | current | An entry in the ISDN config table for each S/T Interface. |
| 1.3.6.1.4.1.5504.5.7.1.1.1.1 | ColumnisdnLineTermClass | read-write | current | NT Terminal Mode.clas1 and class2 operations are as per CCITT I.430, ETSI ETS 300012, and ANSI T1.605 .These specification mandate two classes of operation for… |
| 1.3.6.1.4.1.5504.5.7.1.1.1.2 | ColumnisdnActivationTimer2 | read-write | current | Value of Activation Timer #2. t2-50ms(1): select 50ms for timer #2 t2-100ms(2): select 1000ms for timer #2 The default value is t2-50ms |
| 1.3.6.1.4.1.5504.5.7.1.1.1.3 | ColumnisdnLineLoopBack | read-write | current | loop-back-none(1) :no loop back . loop-back-b1-st-tr(2): transparaent loopback on the S/T interface towards the user(B1 chanel). loop-back-b1-st-nt(3): non-tra… |
| 1.3.6.1.4.1.5504.5.7.1.1.1.4 | ColumnisdnLinePower | read-write | current | State of the line power. off - no power on line. sealing - minimum current on line to preclude corrosion. powering - full current on line. |
| 1.3.6.1.4.1.5504.5.7.1.2 | TableisdnPerfDataCurrentTable | not-accessible | current | The ISDN BRI S/T interface performance table which contains the performance data for curent 15 minutes. It contains information about the status of the ISDN S/… |
| 1.3.6.1.4.1.5504.5.7.1.2.1 | RowisdnPerfDataCurrentEntry | not-accessible | current | An entry in current performance table for each ISDN BRI S/T interface for last 15 minutes. |
| 1.3.6.1.4.1.5504.5.7.1.2.1.1 | ColumnisdnPerfCurBadAmiViolation | read-only | current | Current count of frames with incorrect number of AMI violations. |
| 1.3.6.1.4.1.5504.5.7.1.2.1.2 | ColumnisdnPerfCurUnbalancedFrame | read-only | current | Current count of unbalanced frames. |
| 1.3.6.1.4.1.5504.5.7.1.2.1.3 | ColumnisdnPerCurErrorSeconds | read-only | current | Curent ISDN Activation error seconds. |
| 1.3.6.1.4.1.5504.5.7.1.2.1.4 | ColumnisdnPerCurFsyncSeconds | read-only | current | Currents Frame synch loss seconds . |
| 1.3.6.1.4.1.5504.5.7.1.2.1.5 | ColumnisdnPerfCurTimeElapsed | read-only | current | In the current 15 Min period number of seconds elapsed that these counts represent. |
| 1.3.6.1.4.1.5504.5.7.1.3 | TableisdnPerfDataPreviousTable | not-accessible | current | The ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics… |
| 1.3.6.1.4.1.5504.5.7.1.3.1 | RowisdnPerfDataPreviousEntry | not-accessible | current | An entry in Previous performance table(for last 15 minutes before the current performance period) for each S/T interface. |
| 1.3.6.1.4.1.5504.5.7.1.3.1.1 | ColumnisdnPerfPrevBadAmiViolation | read-only | current | count of frames with incorrect number of AMI violations in previous 15 minutes. |
| 1.3.6.1.4.1.5504.5.7.1.3.1.2 | ColumnisdnPerfPrevUnbalancedFrame | read-only | current | In previous 15 minutes ,count of unbalanced frames. |
| 1.3.6.1.4.1.5504.5.7.1.3.1.3 | ColumnisdnPerPrevFsyncSeconds | read-only | current | Frame synch error seconds in previous 15 minues. |
| 1.3.6.1.4.1.5504.5.7.1.3.1.4 | ColumnisdnPerfPrevErrorSeconds | read-only | current | In previous 15 minutes ISDN Activation error seconds |
| 1.3.6.1.4.1.5504.5.7.1.4 | TableisdnPerfDataTotalTable | not-accessible | current | The ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics… |
| 1.3.6.1.4.1.5504.5.7.1.4.1 | RowisdnPerfDataTotalEntry | not-accessible | current | An entry in total performance table for each S/T interface. |
| 1.3.6.1.4.1.5504.5.7.1.4.1.1 | ColumnisdnPerfTotalBadAmiViolation | read-only | current | Total count of frames with incorrect number of AMI violations. |
| 1.3.6.1.4.1.5504.5.7.1.4.1.2 | ColumnisdnPerfTotalUnbalancedFrame | read-only | current | Total count of unbalanced frames. |
| 1.3.6.1.4.1.5504.5.7.1.4.1.3 | ColumnisdnPerTotalFsyncSeconds | read-only | current | Total Frame synch error seconds. |
| 1.3.6.1.4.1.5504.5.7.1.4.1.4 | ColumnisdnPerfTotalErrorSeconds | read-only | current | ISDN Activation error seconds |
| 1.3.6.1.4.1.5504.5.7.1.4.1.5 | ColumnisdnPerfTotalTimePeriodsElapsed | read-only | current | Number of 15 minute time periods that have been used in the performance total table. This value is normally 96 indicating a valid 24 hour time period except in… |
| 1.3.6.1.4.1.5504.5.7.1.5 | TableisdnAlarmProfileTable | not-accessible | current | This table contains information for Alarm conditions. The table is indexed by IfIndex . The alarm profile will be set per port basis usig ifIndex by the applic… |
| 1.3.6.1.4.1.5504.5.7.1.5.1 | RowisdnAlarmProfileEntry | not-accessible | current | An entry in AlarmProfile Table. |
| 1.3.6.1.4.1.5504.5.7.1.5.1.1 | ColumnisdnThresholdAmiViolations | read-write | current | Threshold for number of AMI violation . If the number of violations cross this threshold then the notification is sent to NMS. 0 will disable the trap. The def… |
| 1.3.6.1.4.1.5504.5.7.1.5.1.2 | ColumnisdnThresholdUnbalancedFrame | read-write | current | Threshold for number of unbalanced frame after which the trap will be send to NMS.0 will disable the trap. The default value is 0. There is no range speciffied… |