ZHONE-Wan-MIB
137 objects
The zhone WAN MIB for configuration of the line. This mib handles CSU and DSX mode.
Imported Objects
| IF-MIB | ifAlias ifIndex InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TimeStamp TruthValue |
| Zhone | zhoneDsx |
| Zhone-TC | ZhoneAdminString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.5.2.1 | IdentityzhoneDs1Mib | The zhone WAN MIB for configuration of the line. This mib handles CSU and DSX mode. | ||
| 1.3.6.1.4.1.5504.5.2.2 | TablezhoneDs1Table | not-accessible | current | The DS1 Configuration table. Statistical information not supported on BAN in this release. |
| 1.3.6.1.4.1.5504.5.2.2.1 | RowzhoneDs1Entry | not-accessible | current | An entry in the DS1 Configuration table. |
| 1.3.6.1.4.1.5504.5.2.2.1.1 | ColumnzhoneLineIndex | not-accessible | current | This object should be made equal to ifIndex. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs. |
| 1.3.6.1.4.1.5504.5.2.2.1.2 | ColumnzhoneTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in th… |
| 1.3.6.1.4.1.5504.5.2.2.1.3 | ColumnzhoneValidIntervals | read-only | current | The numberof previous near end intervals for which data was collected. The value will be 96 unless the interface was brouht online within the last 24 hours, in… |
| 1.3.6.1.4.1.5504.5.2.2.1.4 | ColumnzhoneLineType | read-write | current | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reaso… |
| 1.3.6.1.4.1.5504.5.2.2.1.5 | ColumnzhoneLineCoding | read-write | current | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. jbzs refers the Jam… |
| 1.3.6.1.4.1.5504.5.2.2.1.6 | ColumnzhoneSendCode | read-write | current | This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code req… |
| 1.3.6.1.4.1.5504.5.2.2.1.7 | ColumnzhoneCircuitIdentifier | read-write | current | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.5504.5.2.2.1.8 | ColumnzhoneLoopbackConfig | read-write | current | This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in respon… |
| 1.3.6.1.4.1.5504.5.2.2.1.9 | ColumnzhoneLineStatus | read-only | current | This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. If the zhloopbac… |
| 1.3.6.1.4.1.5504.5.2.2.1.10 | ColumnzhoneSignalMode | read-write | current | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Sig- naling is in use. 'bitOriented' indica… |
| 1.3.6.1.4.1.5504.5.2.2.1.11 | ColumnzhoneTransmitClockSource | read-write | current | Reflects the source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. Only set if this DS1 has zhoneClo… |
| 1.3.6.1.4.1.5504.5.2.2.1.12 | ColumnzhoneFdl | read-write | current | 'other' indicates that a protocol other than one following is used. 'ansiT1403' refers to the FDL exchange recommended by ANSI. 'att54016' refers to ESF FDL ex… |
| 1.3.6.1.4.1.5504.5.2.2.1.13 | ColumnzhoneInvalidIntervals | read-only | current | The number of intervals in the range from 0 to zwValidIntervals for which no data is available. This object will typically be zero except in cases where the da… |
| 1.3.6.1.4.1.5504.5.2.2.1.14 | ColumnzhoneDsxLineLength | read-write | current | The length of the dsx wan is in feets. This objects provides information for line build out circuitry. The valid range is: 'dsx0(1)' It is 0 feet for the line … |
| 1.3.6.1.4.1.5504.5.2.2.1.15 | ColumnzhoneLineStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initia… |
| 1.3.6.1.4.1.5504.5.2.2.1.16 | ColumnzhoneLineStatusChangeTrapEnable | read-write | current | Indicates whether zhoneLineStatusChange traps should be generated for this interface. |
| 1.3.6.1.4.1.5504.5.2.2.1.17 | ColumnzhoneLoopbackStatus | read-only | current | This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a local manager and rem… |
| 1.3.6.1.4.1.5504.5.2.2.1.18 | ColumnzhoneDs1ChannelNumber | read-only | current | This variable represents the channel number of the DS1/E1 on its parent Ds2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3. |
| 1.3.6.1.4.1.5504.5.2.2.1.19 | ColumnzhoneChannelization | read-write | current | Indicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabled… |
| 1.3.6.1.4.1.5504.5.2.2.1.20 | ColumnzhoneDs1Mode | read-write | current | 'other' wan is not in csu or dsx mode. 'dsx' T1 wan is in dsx mode. 'csu' T1 wan is in csu mode. Default setting is 'csu' for T1 platforms and 'other' for E1. … |
| 1.3.6.1.4.1.5504.5.2.2.1.21 | ColumnzhoneCsuLineLength | read-write | current | 'csu00' it is 0 dB for csu ds1 wan for line build out. 'csu75' it is -7.5 dB for line build out. 'csu150' it is -15.0 dB for line build out. 'csu225' it is -22… |
| 1.3.6.1.4.1.5504.5.2.2.1.22 | ColumnzhoneClockSourceEligibility | read-write | current | The possible values are: (1) not-eligibile - this DS1 is not eligible to be negotiated as a possible transmit clock source (2) eligible - this DS1 may be used … |
| 1.3.6.1.4.1.5504.5.2.2.1.23 | ColumnzhoneCellScramble | read-write | current | This field describes the enabled status of the Ds1 Cell Scramble mode. If this field is true(1) then Scramble mode is enabled, if this field is false(2) scramb… |
| 1.3.6.1.4.1.5504.5.2.2.1.24 | ColumnzhoneCosetPolynomial | read-write | current | This field describes the enabled status of the Coset Polynomial mode. If this field is true(1) then Coset Polynomial mode is enabled, if this field is false(2)… |
| 1.3.6.1.4.1.5504.5.2.2.1.25 | ColumnzhoneDs1ProtocolEmulation | read-write | current | Indicates whether the device is acting as Network-side or CPE with respect to this DS1. For example, if the system is configured with a PBX on the network side… |
| 1.3.6.1.4.1.5504.5.2.2.1.26 | ColumnzhoneDs1SignalType | read-write | current | The signaling type of the FXS interfaces within this DS1. |
| 1.3.6.1.4.1.5504.5.2.2.1.27 | ColumnzhoneDs1GroupIndex | read-write | current | The Group index this Ds1 belongs to |
| 1.3.6.1.4.1.5504.5.2.2.1.28 | ColumnzhoneDs1LinePower | read-write | current | Enable or disable line power for the DS1 interface. |
| 1.3.6.1.4.1.5504.5.2.2.1.29 | ColumnzhoneDs1TimeslotAssignment | read-write | current | This table entry is a bit field indicating which timeslots in a ds1 are used (or assigned). Default for DS1 based card: 1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1… |
| 1.3.6.1.4.1.5504.5.2.2.1.30 | ColumnzhoneDs1TxClockRecovery | read-write | obsolete | PWE transmit clock recovery method |
| 1.3.6.1.4.1.5504.5.2.2.1.31 | ColumnzhoneDs1TxClockAdaptiveQuality | read-write | current | Determines sync drift when operating in PWE adaptive mode. Values reflect ANSI Standard T1.101 reference clock quality. |
| 1.3.6.1.4.1.5504.5.2.3 | TablezhoneDs1CurrentTable | not-accessible | current | The DS1 current table contains various statistics being collected for the current 15 minute interval. Not supported on BAN in this release. |
| 1.3.6.1.4.1.5504.5.2.3.1 | RowzhoneDs1CurrentEntry | not-accessible | current | An entry in the DS1 Current table. |
| 1.3.6.1.4.1.5504.5.2.3.1.1 | ColumnzhoneCurrentIndex | not-accessible | current | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.5504.5.2.3.1.2 | ColumnzhoneCurrentESs | read-only | current | The number of Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.3.1.3 | ColumnzhoneCurrentSESs | read-only | current | The number of Severely Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.3.1.4 | ColumnzhoneCurrentSEFSs | read-only | current | The number of Severely Errored Framing Seconds. |
| 1.3.6.1.4.1.5504.5.2.3.1.5 | ColumnzhoneCurrentUASs | read-only | current | The number of Unavailable Seconds. |
| 1.3.6.1.4.1.5504.5.2.3.1.6 | ColumnzhoneCurrentCSSs | read-only | current | The number of Controlled Slip Seconds. |
| 1.3.6.1.4.1.5504.5.2.3.1.7 | ColumnzhoneCurrentPCVs | read-only | current | The number of Path Coding Violations. |
| 1.3.6.1.4.1.5504.5.2.3.1.8 | ColumnzhoneCurrentLESs | read-only | current | The number of Line Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.3.1.9 | ColumnzhoneCurrentBESs | read-only | current | The number of Bursty Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.3.1.10 | ColumnzhoneCurrentDMs | read-only | current | The number of Degraded Minutes. |
| 1.3.6.1.4.1.5504.5.2.3.1.11 | ColumnzhoneCurrentLCVs | read-only | current | The number of Line Code Violations (LCVs). |
| 1.3.6.1.4.1.5504.5.2.4 | TablezhoneDs1IntervalTable | not-accessible | current | The DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 9… |
| 1.3.6.1.4.1.5504.5.2.4.1 | RowzhoneDs1IntervalEntry | not-accessible | current | An entry in the DS1 Interval table. |
| 1.3.6.1.4.1.5504.5.2.4.1.1 | ColumnzhoneIntervalIndex | not-accessible | current | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.5504.5.2.4.1.2 | ColumnzhoneIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.5504.5.2.4.1.3 | ColumnzhoneIntervalESs | read-only | current | The number of Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.4.1.4 | ColumnzhoneIntervalSESs | read-only | current | The number of Severely Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.4.1.5 | ColumnzhoneIntervalSEFSs | read-only | current | The number of Severely Errored Framing Seconds. |
| 1.3.6.1.4.1.5504.5.2.4.1.6 | ColumnzhoneIntervalUASs | read-only | current | The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary. |
| 1.3.6.1.4.1.5504.5.2.4.1.7 | ColumnzhoneIntervalCSSs | read-only | current | The number of Controlled Slip Seconds. |
| 1.3.6.1.4.1.5504.5.2.4.1.8 | ColumnzhoneIntervalPCVs | read-only | current | The number of Path Coding Violations. |
| 1.3.6.1.4.1.5504.5.2.4.1.9 | ColumnzhoneIntervalLESs | read-only | current | The number of Line Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.4.1.10 | ColumnzhoneIntervalBESs | read-only | current | The number of Bursty Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.4.1.11 | ColumnzhoneIntervalDMs | read-only | current | The number of Degraded Minutes. |
| 1.3.6.1.4.1.5504.5.2.4.1.12 | ColumnzhoneIntervalLCVs | read-only | current | The number of Line Code Violations. |
| 1.3.6.1.4.1.5504.5.2.4.1.13 | ColumnzhoneIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.5504.5.2.5 | TablezhoneDs1TotalTable | not-accessible | current | The DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. Not supported on BAN in this r… |
| 1.3.6.1.4.1.5504.5.2.5.1 | RowzhoneDs1TotalEntry | not-accessible | current | An entry in the DS1 Total table. |
| 1.3.6.1.4.1.5504.5.2.5.1.1 | ColumnzhoneTotalIndex | not-accessible | current | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.5504.5.2.5.1.2 | ColumnzhoneTotalESs | read-only | current | The sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.3 | ColumnzhoneTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.4 | ColumnzhoneTotalSEFSs | read-only | current | The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.5 | ColumnzhoneTotalUASs | read-only | current | The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.6 | ColumnzhoneTotalCSSs | read-only | current | The number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.7 | ColumnzhoneTotalPCVs | read-only | current | The number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.8 | ColumnzhoneTotalLESs | read-only | current | The number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.9 | ColumnzhoneTotalBESs | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.10 | ColumnzhoneTotalDMs | read-only | current | The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.5.1.11 | ColumnzhoneTotalLCVs | read-only | current | The number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.6 | TablezhoneDs1FarEndCurrentTable | not-accessible | current | The DS1 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end mes… |
| 1.3.6.1.4.1.5504.5.2.6.1 | RowzhoneDs1FarEndCurrentEntry | not-accessible | current | An entry in the DS1 Far End Current table. |
| 1.3.6.1.4.1.5504.5.2.6.1.1 | ColumnzhoneFarEndCurrentIndex | not-accessible | current | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.5504.5.2.6.1.2 | ColumnzhoneFarEndTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the … |
| 1.3.6.1.4.1.5504.5.2.6.1.3 | ColumnzhoneFarEndValidIntervals | read-only | current | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, i… |
| 1.3.6.1.4.1.5504.5.2.6.1.4 | ColumnzhoneFarEndCurrentESs | read-only | current | The number of Far End Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.6.1.5 | ColumnzhoneFarEndCurrentSESs | read-only | current | The number of Far End Severely Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.6.1.6 | ColumnzhoneFarEndCurrentSEFSs | read-only | current | The number of Far End Severely Errored Framing Seconds. |
| 1.3.6.1.4.1.5504.5.2.6.1.7 | ColumnzhoneFarEndCurrentUASs | read-only | current | The number of Unavailable Seconds. |
| 1.3.6.1.4.1.5504.5.2.6.1.8 | ColumnzhoneFarEndCurrentCSSs | read-only | current | The number of Far End Controlled Slip Seconds. |
| 1.3.6.1.4.1.5504.5.2.6.1.9 | ColumnzhoneFarEndCurrentLESs | read-only | current | The number of Far End Line Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.6.1.10 | ColumnzhoneFarEndCurrentPCVs | read-only | current | The number of Far End Path Coding Violations. |
| 1.3.6.1.4.1.5504.5.2.6.1.11 | ColumnzhoneFarEndCurrentBESs | read-only | current | The number of Far End Bursty Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.6.1.12 | ColumnzhoneFarEndCurrentDMs | read-only | current | The number of Far End Degraded Minutes. |
| 1.3.6.1.4.1.5504.5.2.6.1.13 | ColumnzhoneFarEndInvalidIntervals | read-only | current | The number of intervals in the range from 0 to zhFarEndValidIntervals for which no data is available. This object will typically be zero except in cases where … |
| 1.3.6.1.4.1.5504.5.2.7 | TablezhoneDs1FarEndIntervalTable | not-accessible | current | The DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broke… |
| 1.3.6.1.4.1.5504.5.2.7.1 | RowzhoneDs1FarEndIntervalEntry | not-accessible | current | An entry in the DS1 Far End Interval table. |
| 1.3.6.1.4.1.5504.5.2.7.1.1 | ColumnzhoneFarEndIntervalIndex | not-accessible | current | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.5504.5.2.7.1.2 | ColumnzhoneFarEndIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.5504.5.2.7.1.3 | ColumnzhoneFarEndIntervalESs | read-only | current | The number of Far End Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.7.1.4 | ColumnzhoneFarEndIntervalSESs | read-only | current | The number of Far End Severely Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.7.1.5 | ColumnzhoneFarEndIntervalSEFSs | read-only | current | The number of Far End Severely Errored Framing Seconds. |
| 1.3.6.1.4.1.5504.5.2.7.1.6 | ColumnzhoneFarEndIntervalUASs | read-only | current | The number of Unavailable Seconds. |
| 1.3.6.1.4.1.5504.5.2.7.1.7 | ColumnzhoneFarEndIntervalCSSs | read-only | current | The number of Far End Controlled Slip Seconds. |
| 1.3.6.1.4.1.5504.5.2.7.1.8 | ColumnzhoneFarEndIntervalLESs | read-only | current | The number of Far End Line Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.7.1.9 | ColumnzhoneFarEndIntervalPCVs | read-only | current | The number of Far End Path Coding Violations. |
| 1.3.6.1.4.1.5504.5.2.7.1.10 | ColumnzhoneFarEndIntervalBESs | read-only | current | The number of Far End Bursty Errored Seconds. |
| 1.3.6.1.4.1.5504.5.2.7.1.11 | ColumnzhoneFarEndIntervalDMs | read-only | current | The number of Far End Degraded Minutes. |
| 1.3.6.1.4.1.5504.5.2.7.1.12 | ColumnzhoneFarEndIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.5504.5.2.8 | TablezhoneDs1FarEndTotalTable | not-accessible | current | The DS1 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. Not supported in this … |
| 1.3.6.1.4.1.5504.5.2.8.1 | RowzhoneDs1FarEndTotalEntry | not-accessible | current | An entry in the DS1 Far End Total table. |
| 1.3.6.1.4.1.5504.5.2.8.1.1 | ColumnzhoneFarEndTotalIndex | not-accessible | current | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.5504.5.2.8.1.2 | ColumnzhoneFarEndTotalESs | read-only | current | The number of Far End Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.8.1.3 | ColumnzhoneFarEndTotalSESs | read-only | current | The number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.8.1.4 | ColumnzhoneFarEndTotalSEFSs | read-only | current | The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.8.1.5 | ColumnzhoneFarEndTotalUASs | read-only | current | The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.8.1.6 | ColumnzhoneFarEndTotalCSSs | read-only | current | The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.8.1.7 | ColumnzhoneFarEndTotalLESs | read-only | current | The number of Far End Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.8.1.8 | ColumnzhoneFarEndTotalPCVs | read-only | current | The number of Far End Path Coding Violations reported via the far end block error count encountered by a DS1 interface in the previous 24 hour interval. Invali… |
| 1.3.6.1.4.1.5504.5.2.8.1.9 | ColumnzhoneFarEndTotalBESs | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.8.1.10 | ColumnzhoneFarEndTotalDMs | read-only | current | The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.5504.5.2.9 | TablezhoneChanMappingTable | not-accessible | current | The DS1 Channel Mapping table. This table maps a DS1 channel number on a particular DS3 into an ifIndex. In the presence of DS2s, this table can be used to map… |
| 1.3.6.1.4.1.5504.5.2.9.1 | RowzhoneChanMappingEntry | not-accessible | current | An entry in the DS1 Channel Mapping table. There is an entry in this table corresponding to each ds1 ifEntry within any interface that is channelized to the in… |
| 1.3.6.1.4.1.5504.5.2.9.1.1 | ColumnzhoneChanMappedIfIndex | read-only | current | This object indicates the ifIndex value assigned by the agent for the individual ds1 ifEntry that corresponds to the given DS1 channel number (specified by the… |
| 1.3.6.1.4.1.5504.5.2.10 | NodezhoneDsxTraps | |||
| 1.3.6.1.4.1.5504.5.2.10.0 | NodezhoneDsxTrapsV2 | |||
| 1.3.6.1.4.1.5504.5.2.10.0.1 | NotificationzhoneLineStatusChange | current | A zhoneLineStatusChange trap is not sent when the value of an instance zhoneLineStatus changes. It can be utilizeded by the NMS to trigger polls. When the line… | |
| 1.3.6.1.4.1.5504.5.2.13 | TablezhoneDs1BertTable | not-accessible | current | The BERT Table is used to issue Bit Error Rate Tests on a particular Ds1. |
| 1.3.6.1.4.1.5504.5.2.13.1 | RowzhoneDs1BertEntry | not-accessible | current | An entry in the BERT table. |
| 1.3.6.1.4.1.5504.5.2.13.1.1 | ColumnzhoneBertIndex | not-accessible | current | This field is the index field for the BERT test channel. There is only 1 BERT test allowed at a time. |
| 1.3.6.1.4.1.5504.5.2.13.1.2 | ColumnzhoneBertInterfaceIndex | read-write | current | This field contains the InterfaceIndex of the physical line to be tested. If no line is currently being tested this value is 0. |
| 1.3.6.1.4.1.5504.5.2.13.1.3 | ColumnzhoneBertRequest | read-write | current | Command request list for the Ds1 BERT test. This object corresponds to the list of test operations that can be performed. The possible values are noOp (1), sta… |
| 1.3.6.1.4.1.5504.5.2.13.1.4 | ColumnzhoneBertType | read-write | current | The type of pattern to use for the BERT test on the Ds1. Supported patterns are qrss, prbs 2^15, or prbs 2^20. |
| 1.3.6.1.4.1.5504.5.2.13.1.5 | ColumnzhoneBertTestDuration | read-write | current | The duration in seconds of the BERT test for the Ds1. The valid range for this field is 10-300 seconds. |
| 1.3.6.1.4.1.5504.5.2.13.1.6 | ColumnzhoneBertLoopUp | read-write | current | The loop code to be sent to the farend prior to running the BERT test for the Ds1. |
| 1.3.6.1.4.1.5504.5.2.14 | TablezhoneDs1BertResultsTable | not-accessible | current | The BERT Results Table is used to retrieve results from a Bit Error Rate Test on a particular Ds1. |
| 1.3.6.1.4.1.5504.5.2.14.1 | RowzhoneDs1BertResultsEntry | not-accessible | current | An entry in the BERT results table. |
| 1.3.6.1.4.1.5504.5.2.14.1.1 | ColumnzhoneBertStatus | read-only | current | The overall BERT operational status. This field will indicate the operation status for the interface indexed by zhoneBertInterfaceIndex. inProgress (1) - if th… |
| 1.3.6.1.4.1.5504.5.2.14.1.2 | ColumnzhoneBertElapsedTime | read-only | current | Elapsed time of the most recent BERT test. |
| 1.3.6.1.4.1.5504.5.2.14.1.3 | ColumnzhoneBertErroredSeconds | read-only | current | Number of errored seconds for the most recent BERT test. This field is only valid when zhoneBertStatus is complete. |
| 1.3.6.1.4.1.5504.5.2.14.1.4 | ColumnzhoneBertOutOfSynchSeconds | read-only | current | Number of out of synch seconds for the most recent BERT test. This field is only valid when zhoneBertStatus is complete. |
| 1.3.6.1.4.1.5504.5.2.14.1.5 | ColumnzhoneBertErrors | read-only | current | Number of errors for the most recent BERT test. This field is only valid when zhoneBertStatus is complete. |