ZXR10-ALARM-MIB
270 objects
The MIB module to describe the Alarm.
Imported Objects
| IF-MIB | ifName |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.3 | Nodezxr10 | |||
| 1.3.6.1.4.1.3902.3.302 | Identityzxr10AlarmMIB | The MIB module to describe the Alarm. | ||
| 1.3.6.1.4.1.3902.3.302.1 | TablecurAlarmTable | not-accessible | current | A list of current Alarm entries. |
| 1.3.6.1.4.1.3902.3.302.1.1 | RowcurAlarmEntry | not-accessible | current | An entry containing management information applicable to a particular alarm. |
| 1.3.6.1.4.1.3902.3.302.1.1.1 | ColumncurAlarmFlowID | read-only | current | Current alarm Index. |
| 1.3.6.1.4.1.3902.3.302.1.1.2 | ColumncurAlarmCode | read-only | current | Current alarm code. |
| 1.3.6.1.4.1.3902.3.302.1.1.3 | ColumncurAlarmClass | read-only | current | Current alarm class. |
| 1.3.6.1.4.1.3902.3.302.1.1.4 | ColumncurAlarmType | read-only | current | Current alarm type. |
| 1.3.6.1.4.1.3902.3.302.1.1.5 | ColumncurAlarmLevel | read-only | current | Current alarm level. |
| 1.3.6.1.4.1.3902.3.302.1.1.6 | ColumncurAlarmStatus | read-only | current | Current alarm status. |
| 1.3.6.1.4.1.3902.3.302.1.1.7 | ColumncurAlarmOccuredTime | read-only | current | Current alarm occured time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.1.1.8 | ColumncurAlarmDisappearedTime | read-only | current | Current alarm disappeared time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.1.1.9 | ColumncurAlarmTPIDType | read-only | current | Current alarm check point type. |
| 1.3.6.1.4.1.3902.3.302.1.1.10 | ColumncurAlarmTPID | read-only | current | Current alarm check point. |
| 1.3.6.1.4.1.3902.3.302.1.1.11 | ColumncurAlarmParaType | read-only | current | Current alarm paratype, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.1.1.12 | ColumncurAlarmParaValue | read-only | current | Current alarm paravalue, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.1.1.13 | ColumncurAlarmDescription | read-only | current | Current alarm description. |
| 1.3.6.1.4.1.3902.3.302.1.1.14 | ColumncurAlarmStdCode | read-only | current | Current alarm standard code. |
| 1.3.6.1.4.1.3902.3.302.1.1.15 | ColumncurAlarmComment | read-only | current | Current alarm comment. |
| 1.3.6.1.4.1.3902.3.302.1.1.16 | ColumncurAlarmNetID | read-only | current | Current alarm NetID. |
| 1.3.6.1.4.1.3902.3.302.1.1.17 | ColumncurAlarmGlobalFlowID | read-only | current | Current alarm global index. |
| 1.3.6.1.4.1.3902.3.302.1.1.18 | ColumncurAlarmUpdatedTime | read-only | current | Current alarm Updated time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.1.1.19 | ColumncurAlarmThAlmPeriod | read-only | current | Current alarm period. |
| 1.3.6.1.4.1.3902.3.302.1.1.20 | ColumncurAlarmThAlmType | read-only | current | Current alarm threshold crossing type. |
| 1.3.6.1.4.1.3902.3.302.1.1.21 | ColumncurAlarmThPerfValue | read-only | current | Current alarm performance value. |
| 1.3.6.1.4.1.3902.3.302.1.1.22 | ColumncurAlarmReturnMode | read-only | current | Current alarm revert type. |
| 1.3.6.1.4.1.3902.3.302.1.1.23 | ColumncurAlarmProtectType | read-only | current | Current alarm protected type. |
| 1.3.6.1.4.1.3902.3.302.1.1.24 | ColumncurAlarmSwitchReason | read-only | current | Current alarm switch reason. |
| 1.3.6.1.4.1.3902.3.302.1.1.25 | ColumncurAlarmUlPrtGroupWrkStat | read-only | current | Current alarm protected group work status. |
| 1.3.6.1.4.1.3902.3.302.1.1.26 | ColumncurAlarmTPIDTypeSwitchFrom | read-only | current | Which check point type switch from. |
| 1.3.6.1.4.1.3902.3.302.1.1.27 | ColumncurAlarmTPIDSwitchFrom | read-only | current | Which check point switch from. |
| 1.3.6.1.4.1.3902.3.302.1.1.28 | ColumncurAlarmTPIDTypeSwitchTo | read-only | current | Which check point type switch to. |
| 1.3.6.1.4.1.3902.3.302.1.1.29 | ColumncurAlarmTPIDSwitchTo | read-only | current | Which check point switch to. |
| 1.3.6.1.4.1.3902.3.302.1.1.30 | ColumncurAlarmTimestamp | read-only | current | Current alarm timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| 1.3.6.1.4.1.3902.3.302.1.1.31 | ColumncurAlarmTPIDLen | read-only | current | The length of current alarm check point. |
| 1.3.6.1.4.1.3902.3.302.1.1.32 | ColumncurAlarmTPIDLenSwitchFrom | read-only | current | The length of check point which switch from. |
| 1.3.6.1.4.1.3902.3.302.1.1.33 | ColumncurAlarmTPIDLenSwitchTo | read-only | current | The length of check point which switch to. |
| 1.3.6.1.4.1.3902.3.302.1.1.34 | ColumncurAlarmOccuredMs | read-only | current | Current alarm occured millisecond. |
| 1.3.6.1.4.1.3902.3.302.1.1.35 | ColumncurAlarmUpdatedMs | read-only | current | Current alarm Updated millisecond. |
| 1.3.6.1.4.1.3902.3.302.1.1.36 | ColumncurAlarmDisappearedMs | read-only | current | Current alarm disappeared millisecond. |
| 1.3.6.1.4.1.3902.3.302.1.1.37 | ColumncurAlarmNeedConfirm | read-only | current | If the alarm need confirm. |
| 1.3.6.1.4.1.3902.3.302.1.1.38 | ColumncurAlarmParaVarBindList | read-only | current | The variable-binding list of alarm parameters. |
| 1.3.6.1.4.1.3902.3.302.1.1.39 | ColumncurAlarmName | read-only | current | Current alarm name. |
| 1.3.6.1.4.1.3902.3.302.1.1.40 | ColumncurAlarmPeid | read-only | current | Current alarm satellite ID. |
| 1.3.6.1.4.1.3902.3.302.1.1.41 | ColumncurAlarmSrcLocation | read-only | current | The location where the alarm occurred. It is a board name or CPU name, such as MPU-0/20/0. If the alarm is unrelated to the board, or if the product does not s… |
| 1.3.6.1.4.1.3902.3.302.2 | TablehisAlarmTable | not-accessible | current | A list of history alarm entries. |
| 1.3.6.1.4.1.3902.3.302.2.1 | RowhisAlarmEntry | not-accessible | current | An entry containing management information applicable to a particular history alarm. |
| 1.3.6.1.4.1.3902.3.302.2.1.1 | ColumnhisAlarmFlowID | read-only | current | History alarm Index. |
| 1.3.6.1.4.1.3902.3.302.2.1.2 | ColumnhisAlarmCode | read-only | current | History alarm code. |
| 1.3.6.1.4.1.3902.3.302.2.1.3 | ColumnhisAlarmClass | read-only | current | History alarm class. |
| 1.3.6.1.4.1.3902.3.302.2.1.4 | ColumnhisAlarmType | read-only | current | History alarm type, 0:at-Communicationsalarm, 1:at-Qosalarm, 2:at-Equipmentalarm, 3:at-Processingerroralarm, 4:at-Environmentalalarm. |
| 1.3.6.1.4.1.3902.3.302.2.1.5 | ColumnhisAlarmLevel | read-only | current | History alarm level. |
| 1.3.6.1.4.1.3902.3.302.2.1.6 | ColumnhisAlarmStatus | read-only | current | History alarm status. |
| 1.3.6.1.4.1.3902.3.302.2.1.7 | ColumnhisAlarmOccuredTime | read-only | current | History alarm occured time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.2.1.8 | ColumnhisAlarmDisappearedTime | read-only | current | History alarm disappeared time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.2.1.9 | ColumnhisAlarmTPIDType | read-only | current | History alarm check point type. |
| 1.3.6.1.4.1.3902.3.302.2.1.10 | ColumnhisAlarmTPID | read-only | current | History alarm check point. |
| 1.3.6.1.4.1.3902.3.302.2.1.11 | ColumnhisAlarmParaType | read-only | current | History alarm paratype, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.2.1.12 | ColumnhisAlarmParaValue | read-only | current | History alarm paravalue, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.2.1.13 | ColumnhisAlarmDescription | read-only | current | History alarm description. |
| 1.3.6.1.4.1.3902.3.302.2.1.14 | ColumnhisAlarmStdCode | read-only | current | History alarm standard code. |
| 1.3.6.1.4.1.3902.3.302.2.1.15 | ColumnhisAlarmComment | read-only | current | History alarm comment. |
| 1.3.6.1.4.1.3902.3.302.2.1.16 | ColumnhisAlarmNetID | read-only | current | History alarm NetID. |
| 1.3.6.1.4.1.3902.3.302.2.1.17 | ColumnhisAlarmGlobalFlowID | read-only | current | History alarm global index. |
| 1.3.6.1.4.1.3902.3.302.2.1.18 | ColumnhisAlarmUpdatedTime | read-only | current | History alarm Updated time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.2.1.19 | ColumnhisAlarmThAlmPeriod | read-only | current | History alarm period. |
| 1.3.6.1.4.1.3902.3.302.2.1.20 | ColumnhisAlarmThAlmType | read-only | current | History alarm threshold crossing type. |
| 1.3.6.1.4.1.3902.3.302.2.1.21 | ColumnhisAlarmThPerfValue | read-only | current | History alarm performance value. |
| 1.3.6.1.4.1.3902.3.302.2.1.22 | ColumnhisAlarmReturnMode | read-only | current | History alarm revert type. |
| 1.3.6.1.4.1.3902.3.302.2.1.23 | ColumnhisAlarmProtectType | read-only | current | History alarm protected type. |
| 1.3.6.1.4.1.3902.3.302.2.1.24 | ColumnhisAlarmSwitchReason | read-only | current | History alarm switch reason. |
| 1.3.6.1.4.1.3902.3.302.2.1.25 | ColumnhisAlarmUlPrtGroupWrkStat | read-only | current | History alarm protected group work status. |
| 1.3.6.1.4.1.3902.3.302.2.1.26 | ColumnhisAlarmTPIDTypeSwitchFrom | read-only | current | Which check point type switch from. |
| 1.3.6.1.4.1.3902.3.302.2.1.27 | ColumnhisAlarmTPIDSwitchFrom | read-only | current | Which check point switch from. |
| 1.3.6.1.4.1.3902.3.302.2.1.28 | ColumnhisAlarmTPIDTypeSwitchTo | read-only | current | Which check point type switch to. |
| 1.3.6.1.4.1.3902.3.302.2.1.29 | ColumnhisAlarmTPIDSwitchTo | read-only | current | Which check point switch to. |
| 1.3.6.1.4.1.3902.3.302.2.1.30 | ColumnhisAlarmTimestamp | read-only | current | History alarm timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| 1.3.6.1.4.1.3902.3.302.2.1.31 | ColumnhisAlarmTPIDLen | read-only | current | The length of history alarm check point. |
| 1.3.6.1.4.1.3902.3.302.2.1.32 | ColumnhisAlarmTPIDLenSwitchFrom | read-only | current | The length of check point which switch from. |
| 1.3.6.1.4.1.3902.3.302.2.1.33 | ColumnhisAlarmTPIDLenSwitchTo | read-only | current | The length of check point which switch to. |
| 1.3.6.1.4.1.3902.3.302.2.1.34 | ColumnhisAlarmOccuredMs | read-only | current | History alarm occured millisecond. |
| 1.3.6.1.4.1.3902.3.302.2.1.35 | ColumnhisAlarmUpdatedMs | read-only | current | History alarm Updated millisecond. |
| 1.3.6.1.4.1.3902.3.302.2.1.36 | ColumnhisAlarmDisappearedMs | read-only | current | History alarm disappeared millisecond. |
| 1.3.6.1.4.1.3902.3.302.2.1.37 | ColumnhisAlarmParaVarBindList | read-only | current | The variable-binding list of history alarm parameters. |
| 1.3.6.1.4.1.3902.3.302.2.1.38 | ColumnhisAlarmName | read-only | current | History alarm name. |
| 1.3.6.1.4.1.3902.3.302.2.1.39 | ColumnhisAlarmPeid | read-only | current | History alarm satellite ID. |
| 1.3.6.1.4.1.3902.3.302.2.1.40 | ColumnhisAlarmSrcLocation | read-only | current | The location where the alarm occurred. It is a board name or CPU name, such as MPU-0/20/0. If the alarm is unrelated to the board, or if the product does not s… |
| 1.3.6.1.4.1.3902.3.302.6 | TablenotificationTable | not-accessible | current | A list of notification entries. |
| 1.3.6.1.4.1.3902.3.302.6.1 | RownotificationEntry | not-accessible | current | An entry containing management information applicable to a notification. |
| 1.3.6.1.4.1.3902.3.302.6.1.1 | ColumnnotificationFlowID | read-only | current | Notification Index. |
| 1.3.6.1.4.1.3902.3.302.6.1.2 | ColumnnotificationAlmCode | read-only | current | Notification alarm code. |
| 1.3.6.1.4.1.3902.3.302.6.1.3 | ColumnnotificationAlmType | read-only | current | Notification alarm type. |
| 1.3.6.1.4.1.3902.3.302.6.1.4 | ColumnnotificationAlmLevel | read-only | current | Notification alarm level. |
| 1.3.6.1.4.1.3902.3.302.6.1.5 | ColumnnotificationAlmOccuredTime | read-only | current | Notification occured time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.6.1.6 | ColumnnotificationTPIDType | read-only | current | Notification check point type. |
| 1.3.6.1.4.1.3902.3.302.6.1.7 | ColumnnotificationTPID | read-only | current | Notification check point. |
| 1.3.6.1.4.1.3902.3.302.6.1.8 | ColumnnotificationAlmParaType | read-only | current | Notification alarm paratype, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.6.1.9 | ColumnnotificationAlmParaValue | read-only | current | Notification alarm paravalue, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.6.1.10 | ColumnnotificationAlmDescription | read-only | current | Notification alarm description. |
| 1.3.6.1.4.1.3902.3.302.6.1.11 | ColumnnotificationAlmStdCode | read-only | current | Notification alarm standard code. |
| 1.3.6.1.4.1.3902.3.302.6.1.12 | ColumnnotificationAlmComment | read-only | current | Notification alarm comment. |
| 1.3.6.1.4.1.3902.3.302.6.1.13 | ColumnnotificationAlmNetID | read-only | current | Notification alarm netID. |
| 1.3.6.1.4.1.3902.3.302.6.1.14 | ColumnnotificationTimestamp | read-only | current | Notification timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| 1.3.6.1.4.1.3902.3.302.6.1.15 | ColumnnotificationTPIDLen | read-only | current | The length of notification check point. |
| 1.3.6.1.4.1.3902.3.302.6.1.16 | ColumnnotificationAlmOccuredMs | read-only | current | Notification occured millisecond. |
| 1.3.6.1.4.1.3902.3.302.6.1.17 | ColumnnotificationNeedConfirm | read-only | current | If the notification need confirm. |
| 1.3.6.1.4.1.3902.3.302.6.1.18 | ColumnnotificationParaVarBindList | read-only | current | The variable-binding list of notification parameters. |
| 1.3.6.1.4.1.3902.3.302.6.1.19 | ColumnnotificationAlmName | read-only | current | Notification alarm name. |
| 1.3.6.1.4.1.3902.3.302.6.1.20 | ColumnnotificationPeid | read-only | current | Notification satellite ID. |
| 1.3.6.1.4.1.3902.3.302.6.1.21 | ColumnnotificationAlmSrcLocation | read-only | current | The location where the alarm occurred. It is a board name or CPU name, such as MPU-0/20/0. If the alarm is unrelated to the board, or if the product does not s… |
| 1.3.6.1.4.1.3902.3.302.8 | NodealarmTrap | |||
| 1.3.6.1.4.1.3902.3.302.8.1 | NotificationcurAlarmTrap | current | When an alarm occurred, send the trap PDU to uniform network manager. Through the configuration command alarm trap-oid-expand, the trap OID can be expanded, ad… | |
| 1.3.6.1.4.1.3902.3.302.8.3 | NotificationnotificationTrap | current | When a notification occurred, send the trap PDU to uniform network manager. Through the configuration command alarm trap-oid-expand, the trap OID can be expand… | |
| 1.3.6.1.4.1.3902.3.302.8.4 | NotificationheartbeatNotification | current | Send a heart-beat trap when required. | |
| 1.3.6.1.4.1.3902.3.302.8.5 | Notificationzxr10AlarmPreloadCancelTrap | current | When an alarm preload canceled, send the trap PDU to uniform network manager. | |
| 1.3.6.1.4.1.3902.3.302.8.6 | Nodezxr10AlarmTrapParam | |||
| 1.3.6.1.4.1.3902.3.302.9 | TablealarmHeartBeatTable | not-accessible | current | A list of heart-beat entries. |
| 1.3.6.1.4.1.3902.3.302.9.1 | RowalarmHeartBeatEntry | not-accessible | current | An entry containing management information applicable to heart-beat. |
| 1.3.6.1.4.1.3902.3.302.9.1.1 | ColumnalarmHeartBeatType | read-only | current | Alarm heart-beat type. 0:snmp, 1:syslog, 2:ftp, 3:console, 4:all. |
| 1.3.6.1.4.1.3902.3.302.9.1.2 | ColumnalarmHeartBeatStart | read-write | current | Alarm heart-beat start. 0:not send, 1:send. |
| 1.3.6.1.4.1.3902.3.302.9.1.3 | ColumnalarmHeartBeatPeriod | read-write | current | Alarm heart-beat period. |
| 1.3.6.1.4.1.3902.3.302.11 | TablealarmLevelTable | not-accessible | obsolete | A list of alarm level entries. |
| 1.3.6.1.4.1.3902.3.302.11.1 | RowalarmLevelEntry | not-accessible | obsolete | An alarm check point entry. |
| 1.3.6.1.4.1.3902.3.302.11.1.1 | ColumnalarmLevelAlarmCode | read-only | obsolete | Alarm code. |
| 1.3.6.1.4.1.3902.3.302.11.1.2 | ColumnalarmLevel | read-write | obsolete | Alarm level. |
| 1.3.6.1.4.1.3902.3.302.12 | TableglobalAlarmTrapTable | not-accessible | current | A list of global Alarm entries. |
| 1.3.6.1.4.1.3902.3.302.12.1 | RowglobalAlarmTrapEntry | not-accessible | current | An entry containing management information applicable to a particular alarm. |
| 1.3.6.1.4.1.3902.3.302.12.1.1 | ColumnglobalAlarmFlowID | read-only | current | Global alarm Index. |
| 1.3.6.1.4.1.3902.3.302.12.1.2 | ColumnglobalAlarmCode | read-only | current | Global alarm code. |
| 1.3.6.1.4.1.3902.3.302.12.1.3 | ColumnglobalAlarmClass | read-only | current | Global alarm class. |
| 1.3.6.1.4.1.3902.3.302.12.1.4 | ColumnglobalAlarmType | read-only | current | Global alarm type. |
| 1.3.6.1.4.1.3902.3.302.12.1.5 | ColumnglobalAlarmLevel | read-only | current | Global alarm level. |
| 1.3.6.1.4.1.3902.3.302.12.1.6 | ColumnglobalAlarmStatus | read-only | current | Global alarm status. |
| 1.3.6.1.4.1.3902.3.302.12.1.7 | ColumnglobalAlarmOccuredTime | read-only | current | Global alarm occured time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.12.1.8 | ColumnglobalAlarmDisappearedTime | read-only | current | Global alarm disappeared time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.12.1.9 | ColumnglobalAlarmTPIDType | read-only | current | Global alarm check point type. |
| 1.3.6.1.4.1.3902.3.302.12.1.10 | ColumnglobalAlarmTPID | read-only | current | Global alarm check point. |
| 1.3.6.1.4.1.3902.3.302.12.1.11 | ColumnglobalAlarmParaType | read-only | current | Global alarm paratype, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.12.1.12 | ColumnglobalAlarmParaValue | read-only | current | Global alarm paravalue, the alarm is sent by. |
| 1.3.6.1.4.1.3902.3.302.12.1.13 | ColumnglobalAlarmDescription | read-only | current | Global alarm description. |
| 1.3.6.1.4.1.3902.3.302.12.1.14 | ColumnglobalAlarmStdCode | read-only | current | Global alarm standard code. |
| 1.3.6.1.4.1.3902.3.302.12.1.17 | ColumnglobalAlarmGlobalFlowID | read-only | current | Global alarm global index. |
| 1.3.6.1.4.1.3902.3.302.12.1.18 | ColumnglobalAlarmUpdatedTime | read-only | current | Global alarm updated time, the time is relative to 1970-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.3.302.12.1.19 | ColumnglobalAlarmThAlmPeriod | read-only | current | Global alarm period. |
| 1.3.6.1.4.1.3902.3.302.12.1.20 | ColumnglobalAlarmThAlmType | read-only | current | Global alarm threshold crossing type. |
| 1.3.6.1.4.1.3902.3.302.12.1.21 | ColumnglobalAlarmThPerfValue | read-only | current | Global alarm performance value. |
| 1.3.6.1.4.1.3902.3.302.12.1.22 | ColumnglobalAlarmReturnMode | read-only | current | Global alarm revert type. |
| 1.3.6.1.4.1.3902.3.302.12.1.23 | ColumnglobalAlarmProtectType | read-only | current | Global alarm protected type. |
| 1.3.6.1.4.1.3902.3.302.12.1.24 | ColumnglobalAlarmSwitchReason | read-only | current | Global alarm switch reason. |
| 1.3.6.1.4.1.3902.3.302.12.1.25 | ColumnglobalAlarmUlPrtGroupWrkStat | read-only | current | Global alarm protected group work status. |
| 1.3.6.1.4.1.3902.3.302.12.1.26 | ColumnglobalAlarmTPIDTypeSwitchFrom | read-only | current | Which check point type switch from. |
| 1.3.6.1.4.1.3902.3.302.12.1.27 | ColumnglobalAlarmTPIDSwitchFrom | read-only | current | Which check point switch from. |
| 1.3.6.1.4.1.3902.3.302.12.1.28 | ColumnglobalAlarmTPIDTypeSwitchTo | read-only | current | Which check point type switch to. |
| 1.3.6.1.4.1.3902.3.302.12.1.29 | ColumnglobalAlarmTPIDSwitchTo | read-only | current | Which check point switch to. |
| 1.3.6.1.4.1.3902.3.302.12.1.30 | ColumnglobalAlarmTimestamp | read-only | current | Global alarm timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| 1.3.6.1.4.1.3902.3.302.12.1.31 | ColumnglobalAlarmTPIDLen | read-only | current | The length of global alarm check point. |
| 1.3.6.1.4.1.3902.3.302.12.1.32 | ColumnglobalAlarmTPIDLenSwitchFrom | read-only | current | The length of check point which switch from. |
| 1.3.6.1.4.1.3902.3.302.12.1.33 | ColumnglobalAlarmTPIDLenSwitchTo | read-only | current | The length of check point which switch to. |
| 1.3.6.1.4.1.3902.3.302.12.1.34 | ColumnglobalAlarmOccuredMs | read-only | current | Global alarm occured millisecond. |
| 1.3.6.1.4.1.3902.3.302.12.1.35 | ColumnglobalAlarmUpdatedMs | read-only | current | Global alarm updated millisecond. |
| 1.3.6.1.4.1.3902.3.302.12.1.36 | ColumnglobalAlarmDisappearedMs | read-only | current | Global alarm disappeared millisecond. |
| 1.3.6.1.4.1.3902.3.302.12.1.37 | ColumnglobalAlarmName | read-only | current | Global alarm name. |
| 1.3.6.1.4.1.3902.3.302.12.1.38 | ColumnglobalAlarmParaVarBindList | read-only | current | The variable-binding list of global alarm parameters. |
| 1.3.6.1.4.1.3902.3.302.12.1.39 | ColumnglobalAlarmPeid | read-only | current | Global alarm satellite ID. |
| 1.3.6.1.4.1.3902.3.302.12.1.40 | ColumnglobalAlarmSrcLocation | read-only | current | The location where the alarm occurred. It is a board name or CPU name, such as MPU-0/20/0. If the alarm is unrelated to the board, or if the product does not s… |
| 1.3.6.1.4.1.3902.3.302.13 | TablealarmClearTable | not-accessible | current | List of alarm entries that can be cleared. |
| 1.3.6.1.4.1.3902.3.302.13.1 | RowalarmClearEntry | not-accessible | current | Alarm entry that can be cleared. |
| 1.3.6.1.4.1.3902.3.302.13.1.1 | ColumnalarmClearGlobalFlowID | read-only | current | Alarm entry FlowID. |
| 1.3.6.1.4.1.3902.3.302.13.1.2 | ColumnalarmClearStatus | read-write | current | Alarm clearance state. 0: value returned in response to a GET request. 1: indicates that a clearance operation is to be performed. Only alarm entries in the cu… |
| 1.3.6.1.4.1.3902.3.302.15 | TablealarmMaskTable | not-accessible | obsolete | A list of alarm mask entries. |
| 1.3.6.1.4.1.3902.3.302.15.1 | RowalarmMaskEntry | not-accessible | obsolete | An alarm mask entry. |
| 1.3.6.1.4.1.3902.3.302.15.1.1 | ColumnalarmMaskTPIDType | not-accessible | obsolete | Alarm mask TPID type. Valid values range from 1 to 65534; 65535 is an invalid value. |
| 1.3.6.1.4.1.3902.3.302.15.1.2 | ColumnalarmMaskTPID | not-accessible | obsolete | Alarm mask TPID. Length is 62 bytes. Valid and invalid values are filled in according to the check point specification. |
| 1.3.6.1.4.1.3902.3.302.15.1.3 | ColumnalarmMaskTPIDMask | not-accessible | obsolete | Each bit indicates whether the corresponding byte in alarmMaskTPID is valid. 1 is valid, 0 is invalid. |
| 1.3.6.1.4.1.3902.3.302.15.1.4 | ColumnalarmMaskAlarmCode | not-accessible | obsolete | Alarm code. |
| 1.3.6.1.4.1.3902.3.302.15.1.100 | ColumnalarmMaskRowStatus | read-create | obsolete | Row status. |
| 1.3.6.1.4.1.3902.3.302.16 | Nodezxr10AlarmGlobalObjects | |||
| 1.3.6.1.4.1.3902.3.302.16.1 | Scalarzxr10AlarmPreloadInterface | accessible-for-notify | current | The interface which canceled proload function. |
| 1.3.6.1.4.1.3902.3.302.17 | TablealarmLevelChangeTable | not-accessible | current | A list of alarm level entries. |
| 1.3.6.1.4.1.3902.3.302.17.1 | RowalarmLevelChangeEntry | not-accessible | current | An alarm level entry. |
| 1.3.6.1.4.1.3902.3.302.17.1.1 | ColumnalarmLevelChangeCode | not-accessible | current | Alarm code. |
| 1.3.6.1.4.1.3902.3.302.17.1.2 | ColumnalarmLevelChangeTPIDType | not-accessible | current | TPID Type. |
| 1.3.6.1.4.1.3902.3.302.17.1.3 | ColumnalarmLevelChangeLevel | read-create | current | Alarm level support 'emergency','alert','critical','error', 'warning','notification','information','debugging'.Alarm level not support 'all'. |
| 1.3.6.1.4.1.3902.3.302.17.1.100 | ColumnalarmLevelChangeRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.3902.3.302.18 | TablealarmShieldTable | not-accessible | current | A list of alarm shield entries. |
| 1.3.6.1.4.1.3902.3.302.18.1 | RowalarmShieldEntry | not-accessible | current | An alarm shield entry. |
| 1.3.6.1.4.1.3902.3.302.18.1.1 | ColumnalarmShieldAlarmCode | not-accessible | current | Alarm code. It does not support 4294967295 when alarmShieldLevel is configured. |
| 1.3.6.1.4.1.3902.3.302.18.1.2 | ColumnalarmShieldBegintime | not-accessible | current | Alarm begin time. |
| 1.3.6.1.4.1.3902.3.302.18.1.3 | ColumnalarmShieldEndtime | not-accessible | current | Alarm end time. |
| 1.3.6.1.4.1.3902.3.302.18.1.4 | ColumnalarmShieldType | not-accessible | current | Alarm type. |
| 1.3.6.1.4.1.3902.3.302.18.1.5 | ColumnalarmShieldLevel | not-accessible | current | Alarm level. |
| 1.3.6.1.4.1.3902.3.302.18.1.100 | ColumnalarmShieldRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.3902.3.302.19 | Tablezxr10AlarmMaskTable | not-accessible | current | A list of alarm mask entries. |
| 1.3.6.1.4.1.3902.3.302.19.1 | Rowzxr10AlarmMaskEntry | not-accessible | current | An alarm mask entry. |
| 1.3.6.1.4.1.3902.3.302.19.1.1 | Columnzxr10AlarmMaskTPIDType | not-accessible | current | Alarm mask TPID type. |
| 1.3.6.1.4.1.3902.3.302.19.1.2 | Columnzxr10AlarmMaskTPID | not-accessible | current | Alarm mask TPID. Length is from 62 to 128 bytes. Valid and invalid values are filled in according to the check point specification. |
| 1.3.6.1.4.1.3902.3.302.19.1.3 | Columnzxr10AlarmMaskTPIDMask | not-accessible | current | Each bit indicates whether the corresponding byte in alarmMaskTPID is valid. 1 is valid, 0 is invalid. |
| 1.3.6.1.4.1.3902.3.302.19.1.4 | Columnzxr10AlarmMaskAlarmCode | not-accessible | current | Alarm code. |
| 1.3.6.1.4.1.3902.3.302.19.1.5 | Columnzxr10AlarmMaskTPIDClass | not-accessible | current | Alarm TPID class. |
| 1.3.6.1.4.1.3902.3.302.19.1.6 | Columnzxr10AlarmMaskTPIDLen | not-accessible | current | Alarm TPID length. Valid value range is from 62 to 128. |
| 1.3.6.1.4.1.3902.3.302.19.1.100 | Columnzxr10AlarmMaskRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.3902.3.302.20 | NodealarmHeartBeatGlobalObjects | |||
| 1.3.6.1.4.1.3902.3.302.20.1 | ScalaralarmHeartBeatNotification | read-write | current | Alarm heart-beat notification report. 1:enable, 2:disable. |
| 1.3.6.1.4.1.3902.3.302.21 | Tablezxr10AlmShdProfTable | not-accessible | current | A list of alarm shield profile entries. |
| 1.3.6.1.4.1.3902.3.302.21.1 | Rowzxr10AlmShdProfEntry | not-accessible | current | An alarm shield profile entry. |
| 1.3.6.1.4.1.3902.3.302.21.1.1 | Columnzxr10AlmShdProfName | not-accessible | current | Alarm shield profile name. |
| 1.3.6.1.4.1.3902.3.302.21.1.100 | Columnzxr10AlmShdProfRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.3902.3.302.22 | Tablezxr10AlmShdProfCodeTable | not-accessible | current | A list of alarm shield profile alarm code entries. |
| 1.3.6.1.4.1.3902.3.302.22.1 | Rowzxr10AlmShdProfCodeEntry | not-accessible | current | An alarm shield profile alarm code entry. |
| 1.3.6.1.4.1.3902.3.302.22.1.1 | Columnzxr10AlmShdProfCodeAlmCode | not-accessible | current | Alarm code. |
| 1.3.6.1.4.1.3902.3.302.22.1.2 | Columnzxr10AlmShdProfCodeStatus | read-create | current | Alarm shield profile status. 1:forever 2:once |
| 1.3.6.1.4.1.3902.3.302.22.1.3 | Columnzxr10AlmProfLevelChange | read-create | current | Alarm level support 'emergency','alert','critical','error', 'warning','notification','information','debugging'.Alarm level not support 'all'. |
| 1.3.6.1.4.1.3902.3.302.22.1.100 | Columnzxr10AlmShdProfCodeRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.3902.3.302.23 | Tablezxr10AlmShdProfApplyTable | not-accessible | current | A list of alarm shield profile apply entries. |
| 1.3.6.1.4.1.3902.3.302.23.1 | Rowzxr10AlmShdProfApplyEntry | not-accessible | current | An alarm shield profile apply entry. |
| 1.3.6.1.4.1.3902.3.302.23.1.1 | Columnzxr10AlmShdProfApplyFlag | not-accessible | current | Alarm shield profile apply flag. 1:system 2:board 3:interface |
| 1.3.6.1.4.1.3902.3.302.23.1.2 | Columnzxr10AlmShdProfApplyBrdName | not-accessible | current | Alarm shield profile apply board name. |
| 1.3.6.1.4.1.3902.3.302.23.1.3 | Columnzxr10AlmShdProfApplyIfName | not-accessible | current | Alarm shield profile apply interface name. |
| 1.3.6.1.4.1.3902.3.302.23.1.100 | Columnzxr10AlmShdProfApplyRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.3902.3.302.24 | Nodezxr10AlmTrapConfirmCfg | |||
| 1.3.6.1.4.1.3902.3.302.24.1 | Scalarzxr10AlmConfirmEnable | read-write | current | Enable or disable the alarm confirm. |
| 1.3.6.1.4.1.3902.3.302.24.2 | Scalarzxr10AlmConfirmTimeout | read-write | current | Specifies the time-out value, in seconds, for an event to be confirmed.It must be set with zxr10AlmResendingTimes together. |
| 1.3.6.1.4.1.3902.3.302.24.3 | Scalarzxr10AlmResendingTimes | read-write | current | The resending event times when device does not receive the event confirm message from the snmp manager. It must be set with zxr10AlmConfirmTimeout together. |
| 1.3.6.1.4.1.3902.3.302.25 | Nodezxr10AlmTrapConfirmOpt | |||
| 1.3.6.1.4.1.3902.3.302.25.1 | Scalarzxr10AlmConfirmFlowId | read-write | current | The cleard Flow Id to be confirmed by a snmp manager. When a manager receive a trap with confirmation information, then the manager should set this mib object … |
| 1.3.6.1.4.1.3902.3.302.25.2 | Scalarzxr10AlmConfirmAlarmStatus | read-write | current | The alarm status of the event to be confirmed. |
| 1.3.6.1.4.1.3902.3.302.26 | Nodezxr10AlmClearRange | |||
| 1.3.6.1.4.1.3902.3.302.26.1 | Scalarzxr10AlmClearBeginFlowID | read-write | current | Start alarm entry FlowID. A start FlowID and an end FlowID together define a range of alarm entries to be cleared in batches. The start FlowID cannot be larger… |
| 1.3.6.1.4.1.3902.3.302.26.2 | Scalarzxr10AlmClearEndFlowID | read-write | current | End alarm entry FlowID. A start FlowID and an end FlowID together define a range of alarm entries to be cleared in batches. The end FlowID cannot be smaller th… |
| 1.3.6.1.4.1.3902.3.302.26.3 | Scalarzxr10AlmClearRangeStatus | read-write | current | Alarm clearance state. 0: value returned in response to a GET request. 1: indicates that a clearance operation is to be performed. zxr10AlmClearRangeStatus mus… |
| 1.3.6.1.4.1.3902.3.302.27 | Nodezxr10AlmTrapSwitch | |||
| 1.3.6.1.4.1.3902.3.302.27.1 | Scalarzxr10AlmTrapLevel | read-write | current | Alarm trap level, only supports 'emergency','alert','critical', 'error','warning','notification','information','debugging','invalid'. 'all' is not supported. D… |
| 1.3.6.1.4.1.3902.3.302.28 | Tablezxr10AlmCodeConfirmTable | not-accessible | current | A list of alarm code trap confirm entries. |
| 1.3.6.1.4.1.3902.3.302.28.1 | Rowzxr10AlmCodeConfirmEntry | not-accessible | current | An entry containing management information applicable to alarm code trap confirm. |
| 1.3.6.1.4.1.3902.3.302.28.1.1 | Columnzxr10AlmCodeConfirmAlarmCode | not-accessible | current | Alarm code. |
| 1.3.6.1.4.1.3902.3.302.28.1.2 | Columnzxr10AlmCodeConfirmTimeout | read-create | current | Specifies the time-out value, in seconds, for an event to be confirmed.It must be set with zxr10AlmCodeConfirmResendTimes together. |
| 1.3.6.1.4.1.3902.3.302.28.1.3 | Columnzxr10AlmCodeConfirmResendTimes | read-create | current | The resending event times when device does not receive the event confirm message from the snmp manager. It must be set with zxr10AlmCodeConfirmTimeout together. |
| 1.3.6.1.4.1.3902.3.302.28.1.100 | Columnzxr10AlmCodeConfirmRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.3902.3.302.29 | Nodezxr10AlmCurStorageObjects | |||
| 1.3.6.1.4.1.3902.3.302.29.1 | Scalarzxr10AlmCurStoragePercent | accessible-for-notify | current | Used current alarm storage percentage. |
| 1.3.6.1.4.1.3902.3.302.29.2 | Scalarzxr10AlmCurStorageOccupancy | accessible-for-notify | current | Current alarm storage occupancy item count. |
| 1.3.6.1.4.1.3902.3.302.29.3 | Scalarzxr10AlmCurStorageCapacity | accessible-for-notify | current | Current alarm storage capacity item count. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmClass | INTEGER { commonAlarm(1), digitalThresholdCrossingAlarm(2), analogThresholdCrossingAlarm(3), switchEvent(4), commonEvent(5) } | current | Enum for alarm class. |
| AlarmComment | OCTET STRING (SIZE (256)) | current | An octet string containing Alarm Comment information. |
| AlarmConfirmNeed | INTEGER { need(1), noNeed(2) } | current | Enum for if alarm need confirm. |
| AlarmDescription | OCTET STRING (SIZE (512)) | current | An octet string containing Alarm Description information. |
| AlarmInterface | OCTET STRING (SIZE (32)) | current | An octet string containing Alarm Interface information. |
| AlarmLevel | INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notification(6), information(7), debugging(8), invalid(9), all(255) } | current | Enum for alarm level. |
| AlarmLocation | OCTET STRING (SIZE (1..31)) | current | An octet string containing Alarm address. |
| AlarmMaskStatus | INTEGER { mask(1), unmask(2) } | current | Enum for alarm mask status. |
| AlarmName | OCTET STRING (SIZE (1..31)) | current | An octet string containing Alarm Name. |
| AlarmNetID | OCTET STRING (SIZE (64)) | current | An octet string containing Alarm NetID. |
| AlarmParaValue | OCTET STRING (SIZE (1537)) | current | An octet string containing Alarm ParaValue information. |
| AlarmProtectedType | INTEGER { onePlusOneBidir(1), fourFBidirOneForOneExtra(2), fourFBidirOneForOneNoextrA(3), twoFBlsrExtra(4), twoFBlsrNoextra(5), fourFBlsrNoextra(6), fourFBlsrExtra(7), oneForNMslinear(8), twoFUnidirMsringNoextra(9), onePlusoneUnidir(10), fourFUnidirOneForOneExtra(11), fourFUnidirOneForOneNoextra(12), oneForNUnidirExtra(13), oneForNUnidirNoextra(14), nFOneForNExtra(15), sncpOnePlusOneProtect(16), sncpOneForOneProtect(17), oneByoneBidir(22), oneByoneUnidir(23), sncpOnePlusOneProtectBidir(24), sncpOnePlusOneProtectUnidi(25), sncpOneByOneProtectBidir(26), sncpOneByOneProtectUnidi(27), ringWrappingProtect(28), ringSteeringProtect(29), pwonePlusone2Send2RcvProtect(30), pwonePlusone2Send1RcvProtect(31), pwoneByone1Send2RcvProtect(32), pwoneByone1Send1RcvProtect(33), onePlusone2Send2RcvProtectBi(40), onePlusone2Send1RcvProtectBi(41), onePlusone2Send2RcvProtectUni(42), onePlusone2Send1RcvProtectUni(43), oneByone1Send2RcvProtectBi(44), oneByone1Send1RcvProtectBi(45), oneByone1Send2RcvProtectUni(46), oneByone1Send1RcvProtectUni(47), wdmMSLinearOnePlusOne(129), wdmMSLinearOneForOne(130), wdmCHLinearOnePlusOne(131), wdmCHLinearOneForOne(132), wdmMSTwosharering(133), wdmCHTworingOneForOne(134), wdmCHTworingOnePlusOne(135), wdmCHTwosharering(136), wdmCHOneForN(137), wdmCHMForN(138), boardOnePlusOne(204), boardOneForN(205), atmUnidirOnePlusOne(300), atmBidirOnePlusOne(301), atmOneForN(302), mplsOnePlusOne(400), mplsOneForN(401), sncpRelated(402), invalid(65534) } | current | Enum for alarm protected type. |
| AlarmRevertType | INTEGER { return(1), unreturn(2), invalid(254) } | current | Enum for alarm revert type. |
| AlarmStatus | INTEGER { disappeared(0), occured(1), updated(2) } | current | Enum for alarm status. |
| AlarmSwitchReason | INTEGER { na(1), restored(2), signalfailofw(3), signalmismatch(4), signaldegrade(5), automaticswitch(6), forceswitch(7), exerciseswitch(8), lockout(9), manualswitch(10), signalfailofp(11), low(12), dnr(13), signaldegradeofp(14), wtrTimerExpires(15), mappingSwitchtoW(18), mappingSwitchtoP(19), invalid(65534) } | current | Enum for alarm switch reason. |
| AlarmThAlmPeriod | INTEGER { fiveMinutes(5), fifteenMinutes(15), twentyFourHours(24), invalid(254) } | current | Enum for alarm period. |
| AlarmThAlmType | INTEGER { highCrossing(1), preHighCrossing(2), preLowCrossing(3), lowCrossing(4), maxReferenceValueCrossing(5), minReferenceValueCrossing(6), invalid(254) } | current | Enum for alarm threshold crossing type. |
| AlarmTPIDClass | INTEGER { classBoard(1), classCPU(2), classSystem(3), classAll(255) } | current | Enum for alarm TPID class. |
| AlarmType | INTEGER { atCommunicationsalarm(0), atQosalarm(1), atEquipmentalarm(2), atProcessingerroralarm(3), atEnvironmentalalarm(4), atAll(255) } | current | Enum for alarm type. |
| AlarmUlPrtGroupWrkStat | INTEGER { switchToWork(1), switchToProtect(2), switchPointDelete(3), sswitchToWork(4), sswitchToProrect(5), turnswitchToProtect(6), retraceswitchToProtect(7), switchToEclock(30), switchToLclock(31), switchToIclock(32), switchToHoldclock(33), switchToClock(34), clockToLockstat(35), clockToUnlockstat(36), clockToCatchstat(37), clockToTrackstat(38), invalid(65534) } | current | Enum for alarm protected group work status. |
| PerfValue | OCTET STRING (SIZE (10)) | current | An octet string containing performance value information. |
| ProfileApplyFlag | INTEGER { system(1), board(2), interface(3) } | current | Enum for alarm shield profile apply flag. |
| ProfileName | OCTET STRING (SIZE (0..32)) | current | An octet string containing Alarm profile name. |
| ProfileStatus | INTEGER { forever(1), once(2) } | current | Enum for alarm shield profile status. |
| Tpid | OCTET STRING (SIZE (62..128)) | current | An octet string containing TPID information. |
| TPIDMemberName | OCTET STRING (SIZE (0..512)) | current | An octet string containing TPID member name information. |
| TPIDMemberType | OCTET STRING (SIZE (0..10)) | current | An octet string containing TPID member type information. |