MIB Viewer

ZYXEL-ACL-MIB

50 objects
The subtree for access control list (ACL)
Imported Objects
INET-ADDRESS-MIBInetAddress
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBPortList
SNMPv2-SMI-- RFC2578 MODULE-IDENTITY -- RFC2851 IpAddress OBJECT-TYPE
SNMPv2-TC-- RFC2579 DisplayString MacAddress RowStatus
ZYXEL-ES-SMIesMgmt
OIDNameAccessStatusDescription
1.3.6.1.4.1.890.1.15.3.10IdentityzyxelAclThe subtree for access control list (ACL)
1.3.6.1.4.1.890.1.15.3.10.1NodezyxelClassifierStatus
1.3.6.1.4.1.890.1.15.3.10.1.1TablezyxelClassifierTablenot-accessiblecurrentThe table contains classifier configuration.
1.3.6.1.4.1.890.1.15.3.10.1.1.1RowzyxelClassifierEntrynot-accessiblecurrentAn entry contains classifier configuration.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.1ColumnzyClassifierNamenot-accessiblecurrentThe name of classifier rule is used for identifying purposes.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.2ColumnzyClassifierStateread-onlycurrentEnable/Disable classifier rule on this switch.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.3ColumnzyClassifierPacketFormatread-onlycurrentPacket format for classifier rule. A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3 standards. A value of Ethernet II indi…
1.3.6.1.4.1.890.1.15.3.10.1.1.1.4ColumnzyClassifierVidread-onlycurrentSource VLAN ID for classifier rule. The range is 1~4094 and value 0 means any VLAN.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.5ColumnzyClassifier8021pPriorityread-onlycurrent802.1p priority for classifier rule. 0~7. The range is 0~7 and value -1 means any priority level.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.6ColumnzyClassifierEthernetTyperead-onlycurrentEthernet type for classifier rule. It is represented in decimal expression and value 65535 means any Ethernet type.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.7ColumnzyClassifierSourceMacAddressread-onlycurrentSource MAC address for classifier rule. 00:00:00:00:00:00 means any source MAC address.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.8ColumnzyClassifierIncomingPortread-onlycurrentIncoming Port for classifier rule. Value 65536 means any port.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.9ColumnzyClassifierDestinationMacAddressread-onlycurrentDestination MAC address for classifier rule. 00:00:00:00:00:00 means any destination MAC address.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.10ColumnzyClassifierDSCPread-onlycurrentDSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.11ColumnzyClassifierIpProtocolread-onlycurrentIP Protocol for classifier rule. Value 255 means any IP protocol.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.12ColumnzyClassifierEstablishOnlyread-onlycurrentEstablish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.13ColumnzyClassifierSourceIpAddressread-onlycurrentSource IP address for classifier rule. 0.0.0.0 means any source IP address.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.14ColumnzyClassifierSourceIpMaskBitsread-onlycurrentSource IP mask bits for classifier rule.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.15ColumnzyClassifierSourceSocketread-onlycurrentSource socket number for classifier rule. Value 0 means any socket number.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.16ColumnzyClassifierDestinationIpAddressread-onlycurrentDestination IP address for classifier rule. 0.0.0.0 means any destination IP address.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.17ColumnzyClassifierDestinationIpMaskBitsread-onlycurrentDestination IP mask bits for classifier rule.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.18ColumnzyClassifierDestinationSocketread-onlycurrentDestination socket number for classifier rule. Value 0 means any socket number.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.19ColumnzyClassifierIPv6DSCPread-onlycurrentDSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.20ColumnzyClassifierIPv6NextHeaderread-onlycurrentIPv6 next header protocol type for classifier rule. Value 255 means any protocol type.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.21ColumnzyClassifierIPv6EstablishOnlyread-onlycurrentEstablish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.22ColumnzyClassifierIPv6SourceIpAddressread-onlycurrentIPv6 source address for classifier rule. :: means any IPv6 source ip address.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.23ColumnzyClassifierIPv6SourceIpPrefixLengthread-onlycurrentIPv6 source address prefix length for classifier rule.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.24ColumnzyClassifierIPv6DestinationIpAddressread-onlycurrentIPv6 destination address for classifier rule. :: means any IPv6 destination ip address.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.25ColumnzyClassifierIPv6DestinationIpPrefixLengthread-onlycurrentIPv6 destination address prefix length for classifier rule.
1.3.6.1.4.1.890.1.15.3.10.1.1.1.26ColumnzyClassifierRowstatusread-onlycurrentThis object shows the entry of classifier rule status.
1.3.6.1.4.1.890.1.15.3.10.2NodezyxelPolicyStatus
1.3.6.1.4.1.890.1.15.3.10.2.1TablezyxelPolicyTablenot-accessiblecurrentThe table contains policy configuration.
1.3.6.1.4.1.890.1.15.3.10.2.1.1RowzyxelPolicyEntrynot-accessiblecurrentAn entry contains policy configuration.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.1ColumnzyPolicyNamenot-accessiblecurrentThe name of policy rule is used for identifying purposes.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.2ColumnzyPolicyStateread-onlycurrentEnable/Disable policy rule on this switch.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.3ColumnzyPolicyClassifierread-onlycurrentThe classifier(s) applies in this policy rule.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.4ColumnzyPolicyVidread-onlycurrentVLAN ID for policy rule.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.5ColumnzyPolicyEgressPortread-onlycurrentThe outgoing port number in this policy rule.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.6ColumnzyPolicy8021pPriorityread-onlycurrentSpecify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.7ColumnzyPolicyDSCPread-onlycurrentSpecify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.8ColumnzyPolicyTOSread-onlycurrentSpecify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.9ColumnzyPolicyBandwidthread-onlycurrentSpecify the bandwidth for policy rule in kilobit per second (Kbps).
1.3.6.1.4.1.890.1.15.3.10.2.1.1.10ColumnzyPolicyOutOfProfileDSCPread-onlycurrentSpecify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.11ColumnzyPolicyForwardingActionread-onlycurrentThere are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets. 'Do not drop the matching fra…
1.3.6.1.4.1.890.1.15.3.10.2.1.1.12ColumnzyPolicyPriorityActionread-onlycurrentThere are four priority actions for policy rule. 'No change' is keep the priority setting of the frames. 'Set the packet's 802.1 priority' is replace the packe…
1.3.6.1.4.1.890.1.15.3.10.2.1.1.13ColumnzyPolicyDiffServActionread-onlycurrentThere are four DiffServ actions for policy rule. 'No change' is keeping the TOS and/or DSCP fields in the packets. 'Set the packet's TOS field' is set the TOS …
1.3.6.1.4.1.890.1.15.3.10.2.1.1.14ColumnzyPolicyOutgoingActionread-onlycurrentThere are four outgoing actions for policy rule. 'Send the packet to the mirror port' is sent the packet to the mirror port. 'Send the packet to the egress por…
1.3.6.1.4.1.890.1.15.3.10.2.1.1.15ColumnzyPolicyMeteringStateread-onlycurrentEnable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.
1.3.6.1.4.1.890.1.15.3.10.2.1.1.16ColumnzyPolicyOutOfProfileActionread-onlycurrentThere are four out of profile actions for policy rule. 'Drop the packet' is discard the out-of-profile traffic. 'Change the DSCP value' is replace the DSCP fie…
1.3.6.1.4.1.890.1.15.3.10.2.1.1.17ColumnzyPolicyRowstatusread-onlycurrentThis object shows the entry of policy rule status.
MIB Viewer