ZYXEL-AS-MIB
92 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | BridgeId Timeout |
| Q-BRIDGE-MIB | PortList |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString ifIndex PhysAddress |
| SNMPv2-SMI | OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890 | Nodezyxel | |||
| 1.3.6.1.4.1.890.1 | Nodeproducts | |||
| 1.3.6.1.4.1.890.1.5 | NodeaccessSwitch | |||
| 1.3.6.1.4.1.890.1.5.1 | NodeaccessSwitchCommon | |||
| 1.3.6.1.4.1.890.1.5.1 | Nodereboot | Send a message to the manager that the system is going to reboot. The variable is the reason why the system reboots. | ||
| 1.3.6.1.4.1.890.1.5.1.1 | NodeaccessSwitchMgnt | |||
| 1.3.6.1.4.1.890.1.5.1.1.1 | ScalaraccessSwitchSystemCurrentStatus | read-only | mandatory | This variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultan… |
| 1.3.6.1.4.1.890.1.5.1.1.2 | ScalaraccessSwitchProblemCause | read-only | mandatory | The variable is the description of sytsem problem. |
| 1.3.6.1.4.1.890.1.5.1.1.3 | ScalaraccessSwitchSystemTemperature | read-only | mandatory | The variable is the current temperature in Celsius of the system. |
| 1.3.6.1.4.1.890.1.5.1.1.4 | TableaccessSwitchFanRpmTable | not-accessible | mandatory | A table that contains rpm information about the fans. |
| 1.3.6.1.4.1.890.1.5.1.1.4.1 | RowaccessSwitchFanRpmEntry | not-accessible | mandatory | A list of rpm information for each fan. |
| 1.3.6.1.4.1.890.1.5.1.1.4.1.1 | ColumnaccessSwitchFanRpmIndex | read-only | mandatory | The identity of the fan. |
| 1.3.6.1.4.1.890.1.5.1.1.4.1.2 | ColumnaccessSwitchFanRpmCurValue | read-only | mandatory | The current rpm of the fan. |
| 1.3.6.1.4.1.890.1.5.1.1.4.1.3 | ColumnaccessSwitchFanRpmMaxValue | read-only | mandatory | The maximum rpm ever performed by the fan. |
| 1.3.6.1.4.1.890.1.5.1.1.4.1.4 | ColumnaccessSwitchFanRpmMinValue | read-only | mandatory | The minimum rpm ever performed by the fan. |
| 1.3.6.1.4.1.890.1.5.1.1.4.1.5 | ColumnaccessSwitchFanRpmLowThresh | read-only | mandatory | The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap. |
| 1.3.6.1.4.1.890.1.5.1.1.4.1.6 | ColumnaccessSwitchFanRpmDescr | read-only | mandatory | The description of the fan (e.g. location, function, etc.). |
| 1.3.6.1.4.1.890.1.5.1.1.5 | TableaccessSwitchVoltageTable | not-accessible | mandatory | A table that contains voltage information about the system. |
| 1.3.6.1.4.1.890.1.5.1.1.5.1 | RowaccessSwitchVoltageEntry | not-accessible | mandatory | A list of voltage information for each sensor. |
| 1.3.6.1.4.1.890.1.5.1.1.5.1.1 | ColumnaccessSwitchVoltageIndex | read-only | mandatory | The identity of the sensor. |
| 1.3.6.1.4.1.890.1.5.1.1.5.1.2 | ColumnaccessSwitchVoltageCurValue | read-only | mandatory | The current voltage detected by the sensor (in milli-voltage). |
| 1.3.6.1.4.1.890.1.5.1.1.5.1.3 | ColumnaccessSwitchVoltageMaxValue | read-only | mandatory | The maximum voltage ever detected by the sensor (in milli-voltage). |
| 1.3.6.1.4.1.890.1.5.1.1.5.1.4 | ColumnaccessSwitchVoltageMinValue | read-only | mandatory | The minimum voltage ever detected by the sensor (in milli-voltage). |
| 1.3.6.1.4.1.890.1.5.1.1.5.1.5 | ColumnaccessSwitchVoltageNominalValue | read-only | mandatory | The nominal voltage which the power should supply (in milli-voltage). |
| 1.3.6.1.4.1.890.1.5.1.1.5.1.6 | ColumnaccessSwitchVoltageLowThresh | read-only | mandatory | The low threshold of the voltage. If the current voltage is less than the threshold, the device will initiate the voltageLow trap. |
| 1.3.6.1.4.1.890.1.5.1.1.5.1.7 | ColumnaccessSwitchVoltageDescr | read-only | mandatory | The description of the voltage (e.g. location, nominal value, etc.). |
| 1.3.6.1.4.1.890.1.5.1.1.6 | TableaccessSwitchSysTempTable | not-accessible | mandatory | A table that contains temperature information about system. |
| 1.3.6.1.4.1.890.1.5.1.1.6.1 | RowaccessSwitchSysTempEntry | not-accessible | mandatory | A list of temperature information for each sensor. |
| 1.3.6.1.4.1.890.1.5.1.1.6.1.1 | ColumnaccessSwitchSysTempIndex | read-only | mandatory | The identity of the sensor. |
| 1.3.6.1.4.1.890.1.5.1.1.6.1.2 | ColumnaccessSwitchSysTempCurValue | read-only | mandatory | The current temperature detected in Celsius by the sensor. |
| 1.3.6.1.4.1.890.1.5.1.1.6.1.3 | ColumnaccessSwitchSysTempMaxValue | read-only | mandatory | The maximum temperature ever detected in Celsius by the sensor. |
| 1.3.6.1.4.1.890.1.5.1.1.6.1.4 | ColumnaccessSwitchSysTempMinValue | read-only | mandatory | The minimum temperature ever detected in Celsius by the sensor. |
| 1.3.6.1.4.1.890.1.5.1.1.6.1.5 | ColumnaccessSwitchSysTempHighThresh | read-only | mandatory | The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap. |
| 1.3.6.1.4.1.890.1.5.1.1.6.1.6 | ColumnaccessSwitchSysTempDescr | read-only | mandatory | The description of the temperature sensor (e.g. location, function, etc.). |
| 1.3.6.1.4.1.890.1.5.1.1.7 | ScalaraccessSwitchMaintenance | read-write | mandatory | The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the cor… |
| 1.3.6.1.4.1.890.1.5.1.1.8 | ScalaraccessSwitchMaintenancePort | read-write | mandatory | The port which the maintenance operation should be performed on. The value of 0 means the maintenance should be performed on the system. |
| 1.3.6.1.4.1.890.1.5.1.1.9 | ScalaraccessSwitchMaxNumOfStaticVlans | read-only | mandatory | The maximum number of static VLANs which the system supports |
| 1.3.6.1.4.1.890.1.5.1.1.10 | ScalaracccessSwitchChassisId | read-write | mandatory | The chassis Id of the module |
| 1.3.6.1.4.1.890.1.5.1.1.11 | ScalaraccessSwitchSlotId | read-write | mandatory | The slot Id of the module |
| 1.3.6.1.4.1.890.1.5.1.1.12 | ScalaraccessSwitchModuleType | read-only | mandatory | The type of the module |
| 1.3.6.1.4.1.890.1.5.1.1.13 | ScalaraccessSwitchFWVersion | read-only | mandatory | The firmware version of the access switch. |
| 1.3.6.1.4.1.890.1.5.1.1.14 | ScalaraccessSwitchDriverVersion | read-only | mandatory | The driver version of the access port in this access switch |
| 1.3.6.1.4.1.890.1.5.1.1.15 | ScalaraccessSwitchModemCodeVersion | read-only | mandatory | The modem code version of the access port in this access switch |
| 1.3.6.1.4.1.890.1.5.1.1.16 | ScalaraccessSwitchDSLConfOps | read-write | mandatory | The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond… |
| 1.3.6.1.4.1.890.1.5.1.1.17 | ScalaraccessSwitchDSLConfTarget | read-write | mandatory | The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1~4: reserved Byte 5~7: … |
| 1.3.6.1.4.1.890.1.5.1.1.18 | ScalaraccessSwitchDSLConfProfileName | read-write | mandatory | The DSL profile name |
| 1.3.6.1.4.1.890.1.5.1.1.19 | ScalaraccessSwitchDSLConfMode | read-write | mandatory | The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto |
| 1.3.6.1.4.1.890.1.5.1.1.20 | TableasPacketForwardingTable | not-accessible | mandatory | This table includes the configuration of packet forwarding. |
| 1.3.6.1.4.1.890.1.5.1.1.20.1 | RowasPacketForwardingEntry | not-accessible | mandatory | An entry in asPacketForwardingTable. |
| 1.3.6.1.4.1.890.1.5.1.1.20.1.1 | ColumnasPacketForwardingPortList | read-write | mandatory | The list defines the ports to which the packets will be forwarded. |
| 1.3.6.1.4.1.890.1.5.1.1.21 | ScalarasDhcpRelayEnable | read-write | mandatory | Enable/disable DHCP relay function. |
| 1.3.6.1.4.1.890.1.5.1.1.22 | ScalarasDhcpRelayOption82Enable | read-write | mandatory | Enable/disable the relay agent information option. |
| 1.3.6.1.4.1.890.1.5.1.1.23 | ScalarasDhcpRelayOption82Info | read-write | mandatory | User specific relay agent information. |
| 1.3.6.1.4.1.890.1.5.1.1.24 | ScalarasMaxNumOfDhcpServers | read-only | mandatory | The maximum number of DHCP servers. |
| 1.3.6.1.4.1.890.1.5.1.1.25 | TableasDhcpServerTable | not-accessible | mandatory | A table that contains DHCP server information. |
| 1.3.6.1.4.1.890.1.5.1.1.25.1 | RowasDhcpServerEntry | not-accessible | mandatory | The entry of DHCP server table. |
| 1.3.6.1.4.1.890.1.5.1.1.25.1.1 | ColumnasDhcpServerIp | read-only | mandatory | The IP address of the DHCP server. |
| 1.3.6.1.4.1.890.1.5.1.1.25.1.2 | ColumnasDhcpServerRowStatus | read-write | mandatory | The row status of the DHCP server entry. |
| 1.3.6.1.4.1.890.1.5.1.1.28 | ScalarasMaxNumberOfRadiusServers | read-only | mandatory | The max number of the RADIUS Servers. |
| 1.3.6.1.4.1.890.1.5.1.1.29 | TableasRadiusServerTable | not-accessible | mandatory | A table that contains Radius Server information. |
| 1.3.6.1.4.1.890.1.5.1.1.29.1 | RowasRadiusServerEntry | not-accessible | mandatory | The entry of Radius Server table. |
| 1.3.6.1.4.1.890.1.5.1.1.29.1.1 | ColumnasRadiusServerIndex | read-only | mandatory | The identity of the RADIUS server. |
| 1.3.6.1.4.1.890.1.5.1.1.29.1.2 | ColumnasRadiusServerIp | read-write | mandatory | The IP address of the Radius Server. |
| 1.3.6.1.4.1.890.1.5.1.1.29.1.3 | ColumnasRadiusServerPort | read-write | mandatory | The UDP port of the Radius Server. |
| 1.3.6.1.4.1.890.1.5.1.1.29.1.4 | ColumnasRadiusSharedSecret | read-write | mandatory | The shared secret of the Radius Server. |
| 1.3.6.1.4.1.890.1.5.1.1.29.1.5 | ColumnasRadiusServerRowStatus | read-write | mandatory | The row status of the Radius Server entry. |
| 1.3.6.1.4.1.890.1.5.1.1.30 | ScalarasDot1xEnable | read-write | mandatory | Enable/disable the 802.1x function. |
| 1.3.6.1.4.1.890.1.5.1.1.31 | TableasDot1xPortTable | not-accessible | mandatory | This table includes the configuration of 802.1x. |
| 1.3.6.1.4.1.890.1.5.1.1.31.1 | RowasDot1xPortEntry | not-accessible | mandatory | An entry in asDot1xPortTable. |
| 1.3.6.1.4.1.890.1.5.1.1.31.1.1 | ColumnasDot1xPortEnable | read-write | mandatory | The option defines if the port enables 802.1x settings. |
| 1.3.6.1.4.1.890.1.5.1.1.31.1.2 | ColumnasDot1xPortControl | read-write | mandatory | The configuration defines the 802.1x port control type. |
| 1.3.6.1.4.1.890.1.5.1.1.31.1.3 | ColumnasDot1xPortReAuthEnable | read-write | mandatory | The option defines if the port enables 802.1x re-authentication. |
| 1.3.6.1.4.1.890.1.5.1.1.31.1.4 | ColumnasDot1xPortReAuthPeriod | read-write | mandatory | The configuration defines the 802.1x re-authentication period for each port. |
| 1.3.6.1.4.1.890.1.5.1.2 | NodeaccessSwitchStats | |||
| 1.3.6.1.4.1.890.1.5.1.2.1 | NodeasMacStats | |||
| 1.3.6.1.4.1.890.1.5.1.2.1.1 | ScalarasMacDisplayTarget | read-write | current | This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target should be IfIndex which is used f… |
| 1.3.6.1.4.1.890.1.5.1.2.1.2 | TableasMacTable | not-accessible | current | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.890.1.5.1.2.1.2.1 | RowasMacEntry | not-accessible | current | An entry of asMacTable. |
| 1.3.6.1.4.1.890.1.5.1.2.1.2.1.1 | ColumnasMacAddress | read-only | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.890.1.5.1.2.1.2.1.2 | ColumnasMacPort | read-only | current | The port from which the mac address has been learned. |
| 1.3.6.1.4.1.890.1.5.1.2.1.2.1.3 | ColumnasMacStatus | read-only | current | The status of this entry. |
| 1.3.6.1.4.1.890.1.5.2 | NodesystemShutdown | Send a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown. | ||
| 1.3.6.1.4.1.890.1.5.3 | Nodeoverheat | Send a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system. | ||
| 1.3.6.1.4.1.890.1.5.4 | NodeoverheatOver | Send a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system. | ||
| 1.3.6.1.4.1.890.1.5.5 | NodeerrLog | Send a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log. | ||
| 1.3.6.1.4.1.890.1.5.6 | NodefanRpmLow | Send a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan. | ||
| 1.3.6.1.4.1.890.1.5.7 | NodefanRpmNormal | Send a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan. | ||
| 1.3.6.1.4.1.890.1.5.8 | NodevoltageOutOfRange | Send a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system. | ||
| 1.3.6.1.4.1.890.1.5.9 | NodevoltageNormal | Send a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system. | ||
| 1.3.6.1.4.1.890.1.5.10 | NodesystemMaintenanceFailure | Send a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem. | ||
| 1.3.6.1.4.1.890.1.5.11 | NodeconfigChange | Send a message to the manager that the system configuration data is changed. | ||
| 1.3.6.1.4.1.890.1.5.12 | NodethermalSensorFailure | The trap signifies that the thermal sensor failed. |