MIB Viewer

ZYXEL-AclV2-MIB

89 objects
The subtree for access control list (ACL) version 2
Imported Objects
INET-ADDRESS-MIBInetAddress
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBPortList
SNMPv2-SMI-- RFC2578 MODULE-IDENTITY -- RFC2851 IpAddress OBJECT-TYPE
SNMPv2-TC-- RFC2579 DisplayString MacAddress RowStatus
ZYXEL-ES-SMIesMgmt
OIDNameAccessStatusDescription
1.3.6.1.4.1.890.1.15.3.105IdentityzyxelAclV2The subtree for access control list (ACL) version 2
1.3.6.1.4.1.890.1.15.3.105.1NodezyxelAclV2ClassifierStatus
1.3.6.1.4.1.890.1.15.3.105.1.1TablezyxelAclV2ClassifierTablenot-accessiblecurrentThe table contains classifier general configuration and information.
1.3.6.1.4.1.890.1.15.3.105.1.1.1RowzyxelAclV2ClassifierEntrynot-accessiblecurrentAn entry contains classifier general configuration and information.
1.3.6.1.4.1.890.1.15.3.105.1.1.1.1ColumnzyAclV2ClassifierNamenot-accessiblecurrentThe name of classifier rule is used for identifying purposes.
1.3.6.1.4.1.890.1.15.3.105.1.1.1.2ColumnzyAclV2ClassifierStateread-onlycurrentEnable/Disable classifier rule on this switch.
1.3.6.1.4.1.890.1.15.3.105.1.1.1.3ColumnzyAclV2ClassifierWeightread-onlycurrentWeght value for classifier rule, 0~65535. Default 32767. When the match order is manual, the higher weight the higher priorit When the match order is auto, the…
1.3.6.1.4.1.890.1.15.3.105.1.1.1.4ColumnzyAclV2ClassifierCountStateread-onlycurrentEnable/disable count on this classifier rule. To Enable counting the matched packet number of this rule.
1.3.6.1.4.1.890.1.15.3.105.1.1.1.5ColumnzyAclV2ClassifierLogStateread-onlycurrentEnable/disable log on this classifier rule. To Enable recording the matched packet number of this rule in a configurable time interval.
1.3.6.1.4.1.890.1.15.3.105.1.1.1.6ColumnzyAclV2ClassifierTimeRangeread-onlycurrentTime Range Name for classifier rule. Bind a time range profile with this rule to active this rule in specific time.
1.3.6.1.4.1.890.1.15.3.105.1.1.1.7ColumnzyAclV2ClassifierMatchCountread-onlycurrentMatch-Count of this classifier rule. It will show the matched packet count of this rule if zyAclV2ClassifierCount is enabled.
1.3.6.1.4.1.890.1.15.3.105.1.2TablezyxelAclV2ClassifierEthernetTablenot-accessiblecurrentThe table contains classifier ethernet configuration.
1.3.6.1.4.1.890.1.15.3.105.1.2.1RowzyxelAclV2ClassifierEthernetEntrynot-accessiblecurrentAn entry contains classifier ethernet configuration.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.1ColumnzyAclV2ClassifierEthernetSourcePortsread-onlycurrentSource Port List for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.2ColumnzyAclV2ClassifierEthernetSourceTrunksread-onlycurrentSource Trunk List for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.3ColumnzyAclV2ClassifierEthernetPacketFormatread-onlycurrentPacket format for classifier rule. A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3 standards. A value of Ethernet II indi…
1.3.6.1.4.1.890.1.15.3.105.1.2.1.4ColumnzyAclV2ClassifierEthernet8021pPriorityread-onlycurrent802.1p priority for classifier rule. 0~7. The range is 0~7 and value -1 means any priority level.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.5ColumnzyAclV2ClassifierEthernetInner8021pPriorityread-onlycurrentInner 802.1p priority for classifier rule, 0~7. Value -1 means any priority level.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.6ColumnzyAclV2ClassifierEthernetTyperead-onlycurrentEthernet type for classifier rule. It is represented in decimal expression and value 65535 means any Ethernet type.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.7ColumnzyAclV2ClassifierEthernetSourceMacAddressread-onlycurrentSource MAC address for classifier rule. 00:00:00:00:00:00 means any source MAC address.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.8ColumnzyAclV2ClassifierEthernetSourceMACMaskread-onlycurrentSource MAC Mask for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.9ColumnzyAclV2ClassifierEthernetDestinationMacAddressread-onlycurrentDestination MAC address for classifier rule. 00:00:00:00:00:00 means any destination MAC address.
1.3.6.1.4.1.890.1.15.3.105.1.2.1.10ColumnzyAclV2ClassifierEthernetDestinationMACMaskread-onlycurrentDestination MAC Mask for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.3TablezyxelAclV2ClassifierVlanTablenot-accessiblecurrentAn entry contains classifier VLAN configuration.
1.3.6.1.4.1.890.1.15.3.105.1.3.1RowzyxelAclV2ClassifierVlanEntrynot-accessiblecurrentAn entry contains classifier VLAN configuration.
1.3.6.1.4.1.890.1.15.3.105.1.3.1.1ColumnzyAclV2ClassifierVlanMap1kread-onlycurrentVLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.3.1.2ColumnzyAclV2ClassifierVlanMap2kread-onlycurrentVLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.3.1.3ColumnzyAclV2ClassifierVlanMap3kread-onlycurrentVLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.3.1.4ColumnzyAclV2ClassifierVlanMap4kread-onlycurrentVLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.4TablezyxelAclV2ClassifierInnerVlanTablenot-accessiblecurrentAn entry contains classifier inner VLAN configuration.
1.3.6.1.4.1.890.1.15.3.105.1.4.1RowzyxelAclV2ClassifierInnerVlanEntrynot-accessiblecurrentAn entry contains classifier inner VLAN configuration.
1.3.6.1.4.1.890.1.15.3.105.1.4.1.1ColumnzyAclV2ClassifierInnerVlanMap1kread-onlycurrentinner VLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.4.1.2ColumnzyAclV2ClassifierInnerVlanMap2kread-onlycurrentinner VLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.4.1.3ColumnzyAclV2ClassifierInnerVlanMap3kread-onlycurrentinner VLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.4.1.4ColumnzyAclV2ClassifierInnerVlanMap4kread-onlycurrentinner VLAN ID List for classifer rule. range : 1~4094.
1.3.6.1.4.1.890.1.15.3.105.1.5TablezyxelAclV2ClassifierIpTablenot-accessiblecurrentThe table contains classifier IP configuration.
1.3.6.1.4.1.890.1.15.3.105.1.5.1RowzyxelAclV2ClassifierIpEntrynot-accessiblecurrentAn entry contains classifier IP configuration.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.1ColumnzyAclV2ClassifierIpPacketLenRangeStartread-onlycurrentThe Start value of IP packet length range, 0~65535. And it must smaller then the zyAclV2ClassifierIpPacketLenRangeEnd. Value -1 means any start value.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.2ColumnzyAclV2ClassifierIpPacketLenRangeEndread-onlycurrentThe End value of IP packet length range, 0~65535. And it must larger then the zyAclV2ClassifierIpPacketLenRangeStart. Value -1 means any start value.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.3ColumnzyAclV2ClassifierIpDSCPread-onlycurrentDSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.4ColumnzyAclV2ClassifierIpPrecedenceread-onlycurrentPrecedence for calssifier rule, 0~7. Value -1 means any Precedence.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.5ColumnzyAclV2ClassifierIpToSread-onlycurrentToS for calssifier rule, 0~127. Value -1 means any ToS.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.6ColumnzyAclV2ClassifierIpProtocolread-onlycurrentIP Protocol for classifier rule. Value 255 means any IP protocol.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.7ColumnzyAclV2ClassifierIpEstablishOnlyread-onlycurrentEstablish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.8ColumnzyAclV2ClassifierIpSourceIpAddressread-onlycurrentSource IP address for classifier rule. 0.0.0.0 means any source IP address.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.9ColumnzyAclV2ClassifierIpSourceIpMaskBitsread-onlycurrentSource IP mask bits for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.10ColumnzyAclV2ClassifierIpDestinationIpAddressread-onlycurrentDestination IP address for classifier rule. 0.0.0.0 means any destination IP address.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.11ColumnzyAclV2ClassifierIpDestinationIpMaskBitsread-onlycurrentDestination IP mask bits for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.12ColumnzyAclV2ClassifierIpSourceSocketRangeStartread-onlycurrentSource Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierSourceSocketRangeEnd is no nee…
1.3.6.1.4.1.890.1.15.3.105.1.5.1.13ColumnzyAclV2ClassifierIpSourceSocketRangeEndread-onlycurrentDestination Socket Number range end for classifier rule. This object is not necessary.
1.3.6.1.4.1.890.1.15.3.105.1.5.1.14ColumnzyAclV2ClassifierIpDestinationSocketRangeStartread-onlycurrentSource Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierDestinationSocketRangeEnd is n…
1.3.6.1.4.1.890.1.15.3.105.1.5.1.15ColumnzyAclV2ClassifierIpDestinationSocketRangeEndread-onlycurrentDestination Socket Number range end for classifier rule. This object is not necessary.
1.3.6.1.4.1.890.1.15.3.105.1.6TablezyxelAclV2ClassifierIpv6Tablenot-accessiblecurrentThe table contains classifier IPv6 configuration.
1.3.6.1.4.1.890.1.15.3.105.1.6.1RowzyxelAclV2ClassifierIpv6Entrynot-accessiblecurrentAn entry contains classifier IPv6 configuration.
1.3.6.1.4.1.890.1.15.3.105.1.6.1.1ColumnzyAclV2ClassifierIPv6DSCPread-onlycurrentDSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
1.3.6.1.4.1.890.1.15.3.105.1.6.1.2ColumnzyAclV2ClassifierIPv6NextHeaderread-onlycurrentIPv6 next header protocol type for classifier rule. Value 255 means any protocol type.
1.3.6.1.4.1.890.1.15.3.105.1.6.1.3ColumnzyAclV2ClassifierIPv6EstablishOnlyread-onlycurrentEstablish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
1.3.6.1.4.1.890.1.15.3.105.1.6.1.4ColumnzyAclV2ClassifierIPv6SourceIpAddressread-onlycurrentIPv6 source address for classifier rule. :: means any IPv6 source ip address.
1.3.6.1.4.1.890.1.15.3.105.1.6.1.5ColumnzyAclV2ClassifierIPv6SourceIpPrefixLengthread-onlycurrentIPv6 source address prefix length for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.6.1.6ColumnzyAclV2ClassifierIPv6DestinationIpAddressread-onlycurrentIPv6 destination address for classifier rule. :: means any IPv6 destination ip address.
1.3.6.1.4.1.890.1.15.3.105.1.6.1.7ColumnzyAclV2ClassifierIPv6DestinationIpPrefixLengthread-onlycurrentIPv6 destination address prefix length for classifier rule.
1.3.6.1.4.1.890.1.15.3.105.1.7ScalarzyxelAclV2ClassifierMatchOrderread-onlycurrentManual or Auto to determine the rule ordering. When the match order is manual, the higher weight the higher priority. When the match order is auto, the priorit…
1.3.6.1.4.1.890.1.15.3.105.1.8ScalarzyxelAclV2ClassifierLoggingStateread-onlycurrentEnable/disable Logging for classifier.
1.3.6.1.4.1.890.1.15.3.105.1.9ScalarzyxelAclV2ClassifierLoggingIntervalread-onlycurrentLogging Interval for classifier, 0~65535.
1.3.6.1.4.1.890.1.15.3.105.2NodezyxelAclV2PolicyStatus
1.3.6.1.4.1.890.1.15.3.105.2.1TablezyxelAclV2PolicyTablenot-accessiblecurrentThe table contains policy configuration.
1.3.6.1.4.1.890.1.15.3.105.2.1.1RowzyxelAclV2PolicyEntrynot-accessiblecurrentAn entry contains policy configuration.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.1ColumnzyAclV2PolicyNamenot-accessiblecurrentThe name of policy rule is used for identifying purposes.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.2ColumnzyAclV2PolicyStateread-onlycurrentEnable/Disable policy rule on this switch.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.3ColumnzyAclV2PolicyClassifierread-onlycurrentThe classifier(s) applies in this policy rule.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.4ColumnzyAclV2PolicyVidread-onlycurrentVLAN ID for policy rule.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.5ColumnzyAclV2PolicyEgressPortread-onlycurrentThe outgoing port number in this policy rule.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.6ColumnzyAclV2Policy8021pPriorityread-onlycurrentSpecify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.7ColumnzyAclV2PolicyDSCPread-onlycurrentSpecify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.8ColumnzyAclV2PolicyTOSread-onlycurrentSpecify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.9ColumnzyAclV2PolicyBandwidthread-onlycurrentSpecify the bandwidth for policy rule in kilobit per second (Kbps).
1.3.6.1.4.1.890.1.15.3.105.2.1.1.10ColumnzyAclV2PolicyOutOfProfileDSCPread-onlycurrentSpecify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.11ColumnzyAclV2PolicyForwardingActionread-onlycurrentThere are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets. 'Do not drop the matching fra…
1.3.6.1.4.1.890.1.15.3.105.2.1.1.12ColumnzyAclV2PolicyPriorityActionread-onlycurrentThere are four priority actions for policy rule. 'No change' is keep the priority setting of the frames. 'Set the packet's 802.1 priority' is replace the packe…
1.3.6.1.4.1.890.1.15.3.105.2.1.1.13ColumnzyAclV2PolicyDiffServActionread-onlycurrentThere are four DiffServ actions for policy rule. 'No change' is keeping the TOS and/or DSCP fields in the packets. 'Set the packet's TOS field' is set the TOS …
1.3.6.1.4.1.890.1.15.3.105.2.1.1.14ColumnzyAclV2PolicyOutgoingActionread-onlycurrentThere are four outgoing actions for policy rule. 'Send the packet to the mirror port' is sent the packet to the mirror port. 'Send the packet to the egress por…
1.3.6.1.4.1.890.1.15.3.105.2.1.1.15ColumnzyAclV2PolicyMeteringStateread-onlycurrentEnable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.16ColumnzyAclV2PolicyOutOfProfileActionread-onlycurrentThere are four out of profile actions for policy rule. 'Drop the packet' is discard the out-of-profile traffic. 'Change the DSCP value' is replace the DSCP fie…
1.3.6.1.4.1.890.1.15.3.105.2.1.1.17ColumnzyAclV2PolicyRowstatusread-onlycurrentThis object shows the entry of policy rule status.
1.3.6.1.4.1.890.1.15.3.105.2.1.1.18ColumnzyAclV2PolicyQueueActionread-onlycurrentThere are two queue actions for policy rule. 'No change' is keep the priority setting of the frames. 'Send the packet to priority queue' is put the packets in …
1.3.6.1.4.1.890.1.15.3.105.3NodezyxelAclV2TrapInfoObjects
1.3.6.1.4.1.890.1.15.3.105.3.1ScalarzyAclV2TrapClassifierLogMatchCountnot-accessiblecurrentdisplay log match count of specific classifier rule.
1.3.6.1.4.1.890.1.15.3.105.4NodezyxelAclV2Notifications
1.3.6.1.4.1.890.1.15.3.105.4.1NotificationzyAclV2ClassifierLogNotificationcurrentclassifier log information.
MIB Viewer