ZYXEL-ERR-DISABLE-MIB
28 objects
The subtree for errdisable
Imported Objects
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| ZYXEL-ES-SMI | esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.24 | IdentityzyxelErrdisable | The subtree for errdisable | ||
| 1.3.6.1.4.1.890.1.15.3.24.1 | NodezyxelErrdisableSetup | |||
| 1.3.6.1.4.1.890.1.15.3.24.1.1 | NodezyxelErrdisableRecovery | |||
| 1.3.6.1.4.1.890.1.15.3.24.1.1.1 | ScalarzyErrdisableRecoveryState | read-write | current | Enable/Disable error disabled port recovery feature on the switch. Some features, such as loop guard, allow the switch to shut down a port when an error is det… |
| 1.3.6.1.4.1.890.1.15.3.24.1.1.2 | TablezyxelErrdisableRecoveryReasonTable | not-accessible | current | The table contains errdisable recovery reason configuration. |
| 1.3.6.1.4.1.890.1.15.3.24.1.1.2.1 | RowzyxelErrdisableRecoveryReasonEntry | not-accessible | current | An entry contains errdisable recovery reason configuration. |
| 1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.1 | ColumnzyErrdisableRecoveryReasonType | not-accessible | current | This entry displays the supported features that allow the switch to shut down a port or discard packets on a port according to the feature requirements and wha… |
| 1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.2 | ColumnzyErrdisableRecoveryReasonState | read-write | current | Enable/Disable this entry to allow/prohibit the switch to activate a port after the specified time interval, which is shut down by the supported feature. |
| 1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.3 | ColumnzyErrdisableRecoveryReasonInterval | read-write | current | Enter the number of seconds (from 30 to 2592000) for the switch to wait before enabling the port which was shut down. |
| 1.3.6.1.4.1.890.1.15.3.24.1.2 | NodezyxelErrdisableDetect | |||
| 1.3.6.1.4.1.890.1.15.3.24.1.2.1 | TablezyxelErrdisableDetectReasonTable | not-accessible | current | The table contains errdisable detect reason configuration. |
| 1.3.6.1.4.1.890.1.15.3.24.1.2.1.1 | RowzyxelErrdisableDetectReasonEntry | not-accessible | current | An entry contains errdisable detect reason configuration. |
| 1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.1 | ColumnzyErrdisableDetectReasonType | not-accessible | current | This field displays the type of control packets that may cause CPU overload. |
| 1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.2 | ColumnzyErrdisableDetectReasonState | read-write | current | Enable/Disable the detection on switch to monitor if the configured rate limit for a specific control packet is exceeded and take the mode selected below. |
| 1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.3 | ColumnzyErrdisableDetectReasonMode | read-write | current | Select the mode that the switch takes when the number of control packets exceeds the rate limit on a port, set in the CPU protection. inactivePort - The switch… |
| 1.3.6.1.4.1.890.1.15.3.24.2 | NodezyxelErrdisableStatus | |||
| 1.3.6.1.4.1.890.1.15.3.24.2.1 | TablezyxelErrdisableRecoveryTable | not-accessible | current | The table contains errdisable recovery information. |
| 1.3.6.1.4.1.890.1.15.3.24.2.1.1 | RowzyxelErrdisableRecoveryEntry | not-accessible | current | An entry contains errdisable recovery information. |
| 1.3.6.1.4.1.890.1.15.3.24.2.1.1.1 | ColumnzyErrdisableRecoveryType | not-accessible | current | This field displays the supported features that allow the switch to shut down a port or discard packets on a port according to the feature requirements and wha… |
| 1.3.6.1.4.1.890.1.15.3.24.2.1.1.2 | ColumnzyErrdisableRecoveryPort | not-accessible | current | This field displays which port(s) are shut down or discard packets by above reason. |
| 1.3.6.1.4.1.890.1.15.3.24.2.1.1.3 | ColumnzyErrdisableRecoveryTimeToRecover | read-only | current | This field displays how long (seconds) those ports will be re-activated. |
| 1.3.6.1.4.1.890.1.15.3.24.3 | NodezyxelErrdisableTrapInfoObject | |||
| 1.3.6.1.4.1.890.1.15.3.24.3.1 | ScalarzyErrdisableTrapPort | read-only | current | This trap displays error disable detect on which port(s) by reason below. |
| 1.3.6.1.4.1.890.1.15.3.24.3.2 | ScalarzyErrdisableTrapReasonType | read-only | current | This trap displays which port(s) are shut down or discard packets by mode below. |
| 1.3.6.1.4.1.890.1.15.3.24.3.3 | ScalarzyErrdisableTrapMode | read-only | current | This trap displays which error disable mode on this port. |
| 1.3.6.1.4.1.890.1.15.3.24.4 | NodezyxelErrdisableNotifications | |||
| 1.3.6.1.4.1.890.1.15.3.24.4.1 | NotificationzyErrdisableDetect | current | The trap is sent when an error is detected on a port, such as a loop occurs or the rate limit for specific control packets is exceeded. | |
| 1.3.6.1.4.1.890.1.15.3.24.4.2 | NotificationzyErrdisableRecovery | current | This trap is sent when the switch ceases the action taken on a port, such as shutting down the port or discarding packets on the port, after the specified reco… |