ZYXEL-ES2108G-MIB
544 objects
Fault event table definitions
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePort Timeout |
| DISMAN-PING-MIB | -- RFC2851 OperationResponseStatus |
| IF-MIB | InterfaceIndexOrZero -- RFC2863 |
| INET-ADDRESS-MIB | -- RFC2571 InetAddressType InetAddress |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | -- RFC2579 DisplayString sysObjectID |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | IpAddress NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | -- RFC2578 RowStatus DateAndTime MacAddress StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890 | Nodezyxel | |||
| 1.3.6.1.4.1.890.1 | Nodeproducts | |||
| 1.3.6.1.4.1.890.1.5 | NodeaccessSwitch | |||
| 1.3.6.1.4.1.890.1.5.8 | NodeesSeries | |||
| 1.3.6.1.4.1.890.1.5.8.19 | Nodees2108g | |||
| 1.3.6.1.4.1.890.1.5.8.19.1 | NodesysInfo | |||
| 1.3.6.1.4.1.890.1.5.8.19.1.1 | ScalarsysSwPlatformMajorVers | read-only | mandatory | SW platform major version, e.g. 3. |
| 1.3.6.1.4.1.890.1.5.8.19.1.2 | ScalarsysSwPlatformMinorVers | read-only | mandatory | SW platform minor version, e.g. 50. |
| 1.3.6.1.4.1.890.1.5.8.19.1.3 | ScalarsysSwModelString | read-only | mandatory | Model letters, e.g. TJ |
| 1.3.6.1.4.1.890.1.5.8.19.1.4 | ScalarsysSwVersionControlNbr | read-only | mandatory | Version control number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.19.1.5 | ScalarsysSwDay | read-only | mandatory | SW compilation day, e.g. 19. |
| 1.3.6.1.4.1.890.1.5.8.19.1.6 | ScalarsysSwMonth | read-only | mandatory | SW compilation month, e.g. 8. |
| 1.3.6.1.4.1.890.1.5.8.19.1.7 | ScalarsysSwYear | read-only | mandatory | SW compilation year, e.g. 2004. |
| 1.3.6.1.4.1.890.1.5.8.19.1.8 | ScalarsysHwMajorVers | read-only | mandatory | HW major version number, e.g. 1. |
| 1.3.6.1.4.1.890.1.5.8.19.1.9 | ScalarsysHwMinorVers | read-only | mandatory | HW minor version number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.19.1.10 | ScalarsysSerialNumber | read-only | mandatory | Serial number |
| 1.3.6.1.4.1.890.1.5.8.19.2 | NoderateLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.2.1 | ScalarrateLimitState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.19.2.2 | TablerateLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.2.2.1 | RowrateLimitPortEntry | not-accessible | mandatory | An entry in rateLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.2.2.1.1 | ColumnrateLimitPortState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.2.2.1.2 | ColumnrateLimitPortIngRate | read-write | mandatory | Ingress rate in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.19.2.2.1.3 | ColumnrateLimitPortEgrRate | read-write | mandatory | Egress rate in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.19.2.2.1.5 | ColumnrateLimitPortStateIngress | read-write | mandatory | Ingress rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.2.2.1.6 | ColumnrateLimitPortStateEgress | read-write | mandatory | Egress rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.3 | NodebrLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.3.1 | ScalarbrLimitState | read-write | mandatory | Broadcast/multicast/DLF rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.19.3.2 | TablebrLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.3.2.1 | RowbrLimitPortEntry | not-accessible | mandatory | An entry in brLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.3.2.1.1 | ColumnbrLimitPortState | read-write | mandatory | Rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.3.2.1.2 | ColumnbrLimitPortRate | read-write | mandatory | Allowed rate in in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.19.4 | NodeportSecuritySetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.4.1 | ScalarportSecurityState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.4.2 | TableportSecurityPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.4.2.1 | RowportSecurityPortEntry | not-accessible | mandatory | An entry in portSecurityPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.4.2.1.1 | ColumnportSecurityPortState | read-write | mandatory | Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynami… |
| 1.3.6.1.4.1.890.1.5.8.19.4.2.1.2 | ColumnportSecurityPortLearnState | read-write | mandatory | MAC address learning enabled/disable on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.4.2.1.3 | ColumnportSecurityPortCount | read-write | mandatory | Number of (dynamic) MAC addresses that may be learned on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.4.3 | ScalarportSecurityMacFreeze | read-write | mandatory | This entry is used to execute MacFreeze action to port. It's meaningless while reading this entry. |
| 1.3.6.1.4.1.890.1.5.8.19.5 | NodevlanTrunkSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.5.1 | TablevlanTrunkPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.5.1.1 | RowvlanTrunkPortEntry | not-accessible | mandatory | An entry in vlanTrunkPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.5.1.1.1 | ColumnvlanTrunkPortState | read-write | mandatory | VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch. |
| 1.3.6.1.4.1.890.1.5.8.19.6 | Nodedot1xSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.6.3 | ScalarportAuthState | read-write | mandatory | 802.1x port authentication enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.19.6.4 | TableportAuthTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.6.4.1 | RowportAuthEntry | not-accessible | mandatory | An entry in portAuthTable. |
| 1.3.6.1.4.1.890.1.5.8.19.6.4.1.1 | ColumnportAuthEntryState | read-write | mandatory | 802.1x port authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.6.4.1.2 | ColumnportReAuthEntryState | read-write | mandatory | 802.1x port re-authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.19.6.4.1.3 | ColumnportReAuthEntryTimer | read-write | mandatory | Re-authentication timer in seconds. |
| 1.3.6.1.4.1.890.1.5.8.19.7 | NodesnmpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.7.1 | ScalarsnmpGetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.2 | ScalarsnmpSetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.3 | ScalarsnmpTrapCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.4 | TablesnmpTrapDestTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.4.1 | RowsnmpTrapDestEntry | not-accessible | mandatory | An entry in snmpTrapDestTable. |
| 1.3.6.1.4.1.890.1.5.8.19.7.4.1.1 | ColumnsnmpTrapDestIP | read-only | mandatory | IP address of trap destination. |
| 1.3.6.1.4.1.890.1.5.8.19.7.4.1.2 | ColumnsnmpTrapDestRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.4.1.3 | ColumnsnmpTrapDestPort | read-write | mandatory | The UDP port of the trap destination. |
| 1.3.6.1.4.1.890.1.5.8.19.7.4.1.4 | ColumnsnmpTrapVersion | read-write | mandatory | The SNMP protocol version to send traps. |
| 1.3.6.1.4.1.890.1.5.8.19.7.4.1.5 | ColumnsnmpTrapUserName | read-write | mandatory | The user name for sending SNMPv3 traps. |
| 1.3.6.1.4.1.890.1.5.8.19.7.5 | ScalarsnmpVersion | read-write | mandatory | The SNMP version to be used. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c. |
| 1.3.6.1.4.1.890.1.5.8.19.7.6 | TablesnmpUserTable | not-accessible | current | A table that contains SNMPv3 user information. |
| 1.3.6.1.4.1.890.1.5.8.19.7.6.1 | RowsnmpUserEntry | not-accessible | current | An entry of snmpUserTable. |
| 1.3.6.1.4.1.890.1.5.8.19.7.6.1.1 | ColumnsnmpUserName | read-only | current | The user name. |
| 1.3.6.1.4.1.890.1.5.8.19.7.6.1.2 | ColumnsnmpUserSecurityLevel | read-write | current | The level of security at which SNMP messages can be sent or with which operations are being processed. |
| 1.3.6.1.4.1.890.1.5.8.19.7.6.1.3 | ColumnsnmpUserAuthProtocol | read-write | current | The type of authentication protocol to be used. |
| 1.3.6.1.4.1.890.1.5.8.19.7.6.1.4 | ColumnsnmpUserPrivProtocol | read-write | current | The type of privacy protocol to be used. |
| 1.3.6.1.4.1.890.1.5.8.19.7.7 | TablesnmpTrapGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.7.1 | RowsnmpTrapGroupEntry | not-accessible | mandatory | An entry in snmpTrapGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.19.7.7.1.1 | ColumnsnmpTrapSystemGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.7.1.2 | ColumnsnmpTrapInterfaceGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.7.1.3 | ColumnsnmpTrapAAAGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.7.1.4 | ColumnsnmpTrapIPGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.7.7.1.5 | ColumnsnmpTrapSwitchGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.8 | NodedateTimeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.8.1 | ScalardateTimeServerType | read-write | mandatory | The time service protocol. |
| 1.3.6.1.4.1.890.1.5.8.19.8.2 | ScalardateTimeServerIP | read-write | mandatory | IP address of time server. |
| 1.3.6.1.4.1.890.1.5.8.19.8.3 | ScalardateTimeZone | read-write | mandatory | The time difference between UTC. Ex: +01 |
| 1.3.6.1.4.1.890.1.5.8.19.8.4 | ScalardateTimeNewDateYear | read-write | mandatory | The new date in year. |
| 1.3.6.1.4.1.890.1.5.8.19.8.5 | ScalardateTimeNewDateMonth | read-write | mandatory | The new date in month. |
| 1.3.6.1.4.1.890.1.5.8.19.8.6 | ScalardateTimeNewDateDay | read-write | mandatory | The new date in day. |
| 1.3.6.1.4.1.890.1.5.8.19.8.7 | ScalardateTimeNewTimeHour | read-write | mandatory | The new time in hour. |
| 1.3.6.1.4.1.890.1.5.8.19.8.8 | ScalardateTimeNewTimeMinute | read-write | mandatory | The new time in minute. |
| 1.3.6.1.4.1.890.1.5.8.19.8.9 | ScalardateTimeNewTimeSecond | read-write | mandatory | The new time in second. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10 | NodedateTimeDaylightSavingTimeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.8.10.1 | ScalardaylightSavingTimeState | read-write | mandatory | Daylight saving time service enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.2 | ScalardaylightSavingTimeStartDateWeek | read-write | mandatory | Daylight saving time service start week. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.3 | ScalardaylightSavingTimeStartDateDay | read-write | mandatory | Daylight saving time service start day. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.4 | ScalardaylightSavingTimeStartDateMonth | read-write | mandatory | Daylight saving time service start month. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.5 | ScalardaylightSavingTimeStartDateHour | read-write | mandatory | Daylight saving time service start time. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.6 | ScalardaylightSavingTimeEndDateWeek | read-write | mandatory | Daylight saving time service end week. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.7 | ScalardaylightSavingTimeEndDateDay | read-write | mandatory | Daylight saving time service end day. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.8 | ScalardaylightSavingTimeEndDateMonth | read-write | mandatory | Daylight saving time service end month. |
| 1.3.6.1.4.1.890.1.5.8.19.8.10.9 | ScalardaylightSavingTimeEndDateHour | read-write | mandatory | Daylight saving time service end time. |
| 1.3.6.1.4.1.890.1.5.8.19.9 | NodesysMgmt | |||
| 1.3.6.1.4.1.890.1.5.8.19.9.1 | ScalarsysMgmtConfigSave | read-write | mandatory | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config w… |
| 1.3.6.1.4.1.890.1.5.8.19.9.2 | ScalarsysMgmtBootupConfig | read-write | mandatory | The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can ch… |
| 1.3.6.1.4.1.890.1.5.8.19.9.3 | ScalarsysMgmtReboot | read-write | mandatory | Reboot switch from SNMP. 1:Reboot, 0:Nothing |
| 1.3.6.1.4.1.890.1.5.8.19.9.4 | ScalarsysMgmtDefaultConfig | read-write | mandatory | Erase running config and reset to default. |
| 1.3.6.1.4.1.890.1.5.8.19.9.5 | ScalarsysMgmtLastActionStatus | read-only | mandatory | Display status of last mgmt action. |
| 1.3.6.1.4.1.890.1.5.8.19.10 | Nodelayer2Setup | |||
| 1.3.6.1.4.1.890.1.5.8.19.10.1 | ScalarvlanTypeSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.2 | ScalarigmpSnoopingStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.3 | ScalartagVlanPortIsolationState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.4 | ScalarstpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.5 | ScalartagVlanIngressCheckState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.6 | ScalarigmpFilteringStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.7 | ScalarunknownMulticastFrameForwarding | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.8 | ScalarmulticastGrpHostTimeOut | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.9 | ScalarmulticastGrpLeaveTimeOut | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.10 | Scalarigmpsnp8021pPriority | read-write | mandatory | Set the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change) |
| 1.3.6.1.4.1.890.1.5.8.19.10.11 | ScalarigmpsnpVlanMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.12 | ScalarstpMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.13 | TableigmpsnpVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.13.1 | RowigmpsnpVlanEntry | not-accessible | mandatory | An entry in IgmpsnpVlanTable. |
| 1.3.6.1.4.1.890.1.5.8.19.10.13.1.1 | ColumnigmpsnpVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.13.1.2 | ColumnigmpsnpVlanName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.13.1.3 | ColumnigmpsnpVlanRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.10.14 | ScalarigmpsnpQuerierMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11 | NodeipSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.11.1 | ScalardnsIpAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.2 | NodedefaultMgmtIpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.11.2.1 | ScalardefaultMgmtIpType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.2.2 | ScalardefaultMgmtVid | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.2.3 | ScalardefaultMgmtStaticIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.2.4 | ScalardefaultMgmtStaticSubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.2.5 | ScalardefaultMgmtStaticGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.3 | ScalarmaxNumOfMgmtIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.6 | TablemgmtIpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.6.1 | RowmgmtIpEntry | not-accessible | mandatory | An entry in mgmtIpTable. |
| 1.3.6.1.4.1.890.1.5.8.19.11.6.1.1 | ColumnmgmtEntryIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.6.1.2 | ColumnmgmtEntrySubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.6.1.3 | ColumnmgmtEntryGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.6.1.4 | ColumnmgmtEntryVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.6.1.5 | ColumnmgmtEntryManageable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.11.6.1.6 | ColumnmgmtEntryRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.12 | NodefilterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.12.1 | TablefilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.12.1.1 | RowfilterEntry | not-accessible | mandatory | An entry in filterTable. |
| 1.3.6.1.4.1.890.1.5.8.19.12.1.1.1 | ColumnfilterName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.12.1.1.2 | ColumnfilterMacAddr | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.12.1.1.3 | ColumnfilterVid | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.12.1.1.4 | ColumnfilterRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13 | NodemirrorSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.13.1 | ScalarmirrorState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.2 | ScalarmirrorMonitorPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.3 | ScalarmirrorIngActionState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.4 | ScalarmirrorIngMacAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.5 | ScalarmirrorEgrActionState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.6 | ScalarmirrorEgrMacAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.7 | TablemirrorTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.7.1 | RowmirrorEntry | not-accessible | mandatory | An entry in mirrorTable. |
| 1.3.6.1.4.1.890.1.5.8.19.13.7.1.1 | ColumnmirrorMirroredState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.13.7.1.2 | ColumnmirrorDirection | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14 | NodeaggrSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.14.1 | ScalaraggrState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.2 | ScalaraggrSystemPriority | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.3 | TableaggrGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.3.1 | RowaggrGroupEntry | not-accessible | mandatory | An entry in aggrGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.19.14.3.1.1 | ColumnaggrGroupIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.3.1.2 | ColumnaggrGroupState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.3.1.3 | ColumnaggrGroupDynamicState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.4 | TableaggrPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.4.1 | RowaggrPortEntry | not-accessible | mandatory | An entry in aggrPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.14.4.1.1 | ColumnaggrPortGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.14.4.1.2 | ColumnaggrPortDynamicStateTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15 | NodeaccessCtlSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.15.1 | TableaccessCtlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.1.1 | RowaccessCtlEntry | not-accessible | mandatory | An entry in accessCtlTable. |
| 1.3.6.1.4.1.890.1.5.8.19.15.1.1.1 | ColumnaccessCtlService | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.1.1.2 | ColumnaccessCtlEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.1.1.3 | ColumnaccessCtlServicePort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.1.1.4 | ColumnaccessCtlTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.2 | TablesecuredClientTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.2.1 | RowsecuredClientEntry | not-accessible | mandatory | An entry in securedClientTable. |
| 1.3.6.1.4.1.890.1.5.8.19.15.2.1.1 | ColumnsecuredClientIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.2.1.2 | ColumnsecuredClientEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.2.1.3 | ColumnsecuredClientStartIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.2.1.4 | ColumnsecuredClientEndIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.15.2.1.5 | ColumnsecuredClientService | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.16 | NodequeuingMethodSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.16.1 | ScalarqueuingMethodType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.16.2 | TablequeuingMethodTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.16.2.1 | RowqueuingMethodEntry | not-accessible | mandatory | An entry in queuingMethodTable. |
| 1.3.6.1.4.1.890.1.5.8.19.16.2.1.1 | ColumnqueuingMethodQueue | read-only | mandatory | 0...3 |
| 1.3.6.1.4.1.890.1.5.8.19.16.2.1.2 | ColumnqueuingMethodWeight | read-write | mandatory | 1...15 |
| 1.3.6.1.4.1.890.1.5.8.19.17 | NodestaticRouteSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.17.1 | ScalarmaxNumberOfStaticRoutes | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.17.2 | TablestaticRouteTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.17.2.1 | RowstaticRouteEntry | not-accessible | mandatory | An entry in staticRouteTable. |
| 1.3.6.1.4.1.890.1.5.8.19.17.2.1.1 | ColumnstaticRouteName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.17.2.1.2 | ColumnstaticRouteIp | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.17.2.1.3 | ColumnstaticRouteMask | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.17.2.1.4 | ColumnstaticRouteGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.17.2.1.5 | ColumnstaticRouteMetric | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.17.2.1.6 | ColumnstaticRouteRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.18 | NodearpInfo | |||
| 1.3.6.1.4.1.890.1.5.8.19.18.1 | TablearpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.18.1.1 | RowarpEntry | not-accessible | mandatory | An entry in arpTable. |
| 1.3.6.1.4.1.890.1.5.8.19.18.1.1.1 | ColumnarpIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.18.1.1.2 | ColumnarpIpAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.18.1.1.3 | ColumnarpMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.18.1.1.4 | ColumnarpMacVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.18.1.1.5 | ColumnarpType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19 | NodeportOpModeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.19.1 | TableportOpModePortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1 | RowportOpModePortEntry | not-accessible | mandatory | An entry in portOpModePortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1.1 | ColumnportOpModePortSpeedDuplex | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1.2 | ColumnportOpModePortFlowCntl | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1.3 | ColumnportOpModePortName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1.4 | ColumnportOpModePortModuleType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1.5 | ColumnportOpModePortLinkUpType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1.6 | ColumnportOpModePortIntrusionLock | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.19.1.1.7 | ColumnportOpModePortLBTestStatus | read-only | mandatory | This entry display latest loopback test status of port while performing loopback test. |
| 1.3.6.1.4.1.890.1.5.8.19.20 | NodeportBasedVlanSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.20.1 | TableportBasedVlanPortListTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.20.1.1 | RowportBasedVlanPortListEntry | not-accessible | mandatory | An entry in portBasedVlanPortListTable. |
| 1.3.6.1.4.1.890.1.5.8.19.20.1.1.1 | ColumnportBasedVlanPortListMembers | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.21 | NodediffservSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.21.1 | ScalardiffservState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.21.2 | TablediffservMapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.21.2.1 | RowdiffservMapEntry | not-accessible | mandatory | An entry in diffservMapTable. |
| 1.3.6.1.4.1.890.1.5.8.19.21.2.1.1 | ColumndiffservMapDscp | read-only | mandatory | 0-63 |
| 1.3.6.1.4.1.890.1.5.8.19.21.2.1.2 | ColumndiffservMapPriority | read-write | mandatory | 0-7 |
| 1.3.6.1.4.1.890.1.5.8.19.21.3 | TablediffservPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.21.3.1 | RowdiffservPortEntry | not-accessible | mandatory | An entry in diffservPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.21.3.1.1 | ColumndiffservPortState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22 | NodeclusterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.22.1 | NodeclusterManager | |||
| 1.3.6.1.4.1.890.1.5.8.19.22.1.1 | ScalarclusterMaxNumOfManager | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.1.2 | TableclusterManagerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.1.2.1 | RowclusterManagerEntry | not-accessible | mandatory | An entry in clusterManagerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.22.1.2.1.1 | ColumnclusterManagerVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.1.2.1.2 | ColumnclusterManagerName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.1.2.1.3 | ColumnclusterManagerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.2 | NodeclusterMembers | |||
| 1.3.6.1.4.1.890.1.5.8.19.22.2.1 | ScalarclusterMaxNumOfMember | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.2.2 | TableclusterMemberTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.2.2.1 | RowclusterMemberEntry | not-accessible | mandatory | An entry in clusterMemberTable. |
| 1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.1 | ColumnclusterMemberMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.2 | ColumnclusterMemberName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.3 | ColumnclusterMemberModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.4 | ColumnclusterMemberPassword | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.5 | ColumnclusterMemberRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.3 | NodeclusterCandidates | |||
| 1.3.6.1.4.1.890.1.5.8.19.22.3.1 | TableclusterCandidateTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.3.1.1 | RowclusterCandidateEntry | not-accessible | mandatory | An entry in clusterCandidateTable. |
| 1.3.6.1.4.1.890.1.5.8.19.22.3.1.1.1 | ColumnclusterCandidateMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.3.1.1.2 | ColumnclusterCandidateName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.3.1.1.3 | ColumnclusterCandidateModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4 | NodeclusterStatus | |||
| 1.3.6.1.4.1.890.1.5.8.19.22.4.1 | ScalarclusterStatusRole | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.2 | ScalarclusterStatusManager | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.3 | ScalarclsuterStatusMaxNumOfMember | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.4 | TableclusterStatusMemberTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.4.1 | RowclusterStatusMemberEntry | not-accessible | mandatory | An entry in clusterStatusMemberTable. |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.1 | ColumnclusterStatusMemberMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.2 | ColumnclusterStatusMemberName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.3 | ColumnclusterStatusMemberModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.4 | ColumnclusterStatusMemberStatus | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.26 | IdentityfaultMIB | Fault event table definitions | ||
| 1.3.6.1.4.1.890.1.5.8.19.26.1 | NodeeventObjects | |||
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1 | TableeventTable | not-accessible | current | A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault… |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1 | RoweventEntry | not-accessible | current | An entry containing information about an event in the event table. |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.1 | ColumneventSeqNum | read-only | current | This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps a… |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.2 | ColumneventEventId | read-only | current | This variable represents the event ID which uniquely identifies the event in the entire system. |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.3 | ColumneventName | read-only | current | This variable represents the name of the event, for example 'Ethernet Link Down' |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.4 | ColumneventInstanceType | read-only | current | This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generat… |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.5 | ColumneventInstanceId | read-only | current | This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this e… |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.6 | ColumneventInstanceName | read-only | current | This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooli… |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.7 | ColumneventSeverity | read-only | current | This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events a… |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.8 | ColumneventSetTime | read-only | current | This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM. |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.9 | ColumneventDescription | read-only | current | This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating… |
| 1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.10 | ColumneventServAffective | read-only | current | This variable indicates whether the event is service affective or not |
| 1.3.6.1.4.1.890.1.5.8.19.27 | IdentityfaultTrapsMIB | Fault event trap definitions | ||
| 1.3.6.1.4.1.890.1.5.8.19.27.1 | NodetrapInfoObjects | |||
| 1.3.6.1.4.1.890.1.5.8.19.27.1.1 | ScalartrapRefSeqNum | read-only | current | Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.19.27.1.2 | ScalartrapPersistence | read-only | current | Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap … |
| 1.3.6.1.4.1.890.1.5.8.19.27.1.3 | ScalartrapSenderNodeId | read-only | current | Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.19.27.2 | NodetrapNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.19.27.2.1 | NotificationeventOnTrap | current | This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not… | |
| 1.3.6.1.4.1.890.1.5.8.19.27.2.2 | NotificationeventClearedTrap | current | This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqN… | |
| 1.3.6.1.4.1.890.1.5.8.19.28 | NodemulticastPortSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.28.1 | TablemulticastPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.28.1.1 | RowmulticastPortEntry | not-accessible | mandatory | An entry in multicastPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.28.1.1.1 | ColumnmulticastPortImmediateLeave | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.28.1.1.2 | ColumnmulticastPortMaxGroupLimited | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.28.1.1.3 | ColumnmulticastPortMaxOfGroup | read-write | mandatory | 0..255 |
| 1.3.6.1.4.1.890.1.5.8.19.28.1.1.4 | ColumnmulticastPortIgmpFilteringProfile | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.28.1.1.5 | ColumnmulticastPortQueryMode | read-write | mandatory | Specify query mode for each port |
| 1.3.6.1.4.1.890.1.5.8.19.29 | NodemulticastStatus | |||
| 1.3.6.1.4.1.890.1.5.8.19.29.1 | TablemulticastStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.1.1 | RowmulticastStatusEntry | not-accessible | mandatory | An entry in multicastStatusTable. |
| 1.3.6.1.4.1.890.1.5.8.19.29.1.1.1 | ColumnmulticastStatusIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.1.1.2 | ColumnmulticastStatusVlanID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.1.1.3 | ColumnmulticastStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.1.1.4 | ColumnmulticastStatusGroup | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2 | TableigmpCountTable | not-accessible | mandatory | A count table of igmp query/report/leave message. |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1 | RowigmpCountEntry | not-accessible | mandatory | An entry in igmpCountTable. |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.1 | ColumnigmpCountIndex | read-only | mandatory | Index of IgmpCountEntry. 0 means total count in whole system |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.2 | ColumnigmpCountInQuery | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.3 | ColumnigmpCountInReport | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.4 | ColumnigmpCountInLeave | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.5 | ColumnigmpCountInQueryDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.6 | ColumnigmpCountInReportDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.7 | ColumnigmpCountInLeaveDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.8 | ColumnigmpCountOutQuery | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.9 | ColumnigmpCountOutReport | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.2.1.10 | ColumnigmpCountOutLeave | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.3 | TablemulticastVlanStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.3.1 | RowmulticastVlanStatusEntry | not-accessible | mandatory | An entry in multicastVlanStatusTable. |
| 1.3.6.1.4.1.890.1.5.8.19.29.3.1.1 | ColumnmulticastVlanStatusVlanID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.3.1.2 | ColumnmulticastVlanStatusType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.29.3.1.3 | ColumnmulticastVlanQueryPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.30 | NodeigmpFilteringProfileSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.30.1 | ScalarigmpFilteringMaxNumberOfProfile | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.30.2 | TableigmpFilteringProfileTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.30.2.1 | RowigmpFilteringProfileEntry | not-accessible | mandatory | An entry in igmpFilteringProfileTable. |
| 1.3.6.1.4.1.890.1.5.8.19.30.2.1.1 | ColumnigmpFilteringProfileName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.30.2.1.2 | ColumnigmpFilteringProfileStartAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.30.2.1.3 | ColumnigmpFilteringProfileEndAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.30.2.1.4 | ColumnigmpFilteringProfileRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31 | NodemvrSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.31.1 | ScalarmaxNumberOfMVR | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.2 | TablemvrTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.2.1 | RowmvrEntry | not-accessible | mandatory | An entry in mvrTable. |
| 1.3.6.1.4.1.890.1.5.8.19.31.2.1.1 | ColumnmvrVlanID | read-only | mandatory | 1..4094 |
| 1.3.6.1.4.1.890.1.5.8.19.31.2.1.2 | ColumnmvrName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.2.1.3 | ColumnmvrMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.2.1.4 | ColumnmvrRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.2.1.5 | Columnmvr8021pPriority | read-write | mandatory | Set the 802.1p priority of control messages within MVR (0~7) |
| 1.3.6.1.4.1.890.1.5.8.19.31.3 | TablemvrPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.3.1 | RowmvrPortEntry | not-accessible | mandatory | An entry in mvrPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.31.3.1.1 | ColumnmvrPortRole | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.3.1.2 | ColumnmvrPortTagging | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.4 | ScalarmaxNumberOfMvrGroup | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.5 | TablemvrGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.5.1 | RowmvrGroupEntry | not-accessible | mandatory | An entry in mvrGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.19.31.5.1.1 | ColumnmvrGroupName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.5.1.2 | ColumnmvrGroupStartAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.5.1.3 | ColumnmvrGroupEndAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.31.5.1.4 | ColumnmvrGroupRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32 | NodesysLogSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.32.1 | ScalarsysLogState | read-write | mandatory | sysLog enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.19.32.2 | TablesysLogTypeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.2.1 | RowsysLogTypeEntry | not-accessible | mandatory | An entry in sysLogTypeTable. |
| 1.3.6.1.4.1.890.1.5.8.19.32.2.1.1 | ColumnsysLogTypeIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.2.1.2 | ColumnsysLogTypeName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.2.1.3 | ColumnsysLogTypeState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.2.1.4 | ColumnsysLogTypeFacility | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.3 | TablesysLogServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.3.1 | RowsysLogServerEntry | not-accessible | mandatory | An entry in sysLogServerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.32.3.1.1 | ColumnsysLogServerAddress | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.3.1.2 | ColumnsysLogServerLogLevel | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.32.3.1.3 | ColumnsysLogServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33 | NodedhcpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.33.1 | NodeglobalDhcpRelay | |||
| 1.3.6.1.4.1.890.1.5.8.19.33.1.1 | ScalarglobalDhcpRelayEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.2 | ScalarglobalDhcpRelayOption82Enable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.3 | ScalarglobalDhcpRelayInfoEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.4 | ScalarglobalDhcpRelayInfoData | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.5 | ScalarmaxNumberOfGlobalDhcpRelayRemoteServer | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.6 | TableglobalDhcpRelayRemoteServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.6.1 | RowglobalDhcpRelayRemoteServerEntry | not-accessible | mandatory | An entry in globalDhcpRelayRemoteServerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.6.1.1 | ColumnglobalDhcpRelayRemoteServerIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.1.6.1.2 | ColumnglobalDhcpRelayRemoteServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3 | NodedhcpRelay | |||
| 1.3.6.1.4.1.890.1.5.8.19.33.3.1 | ScalardhcpRelayInfoData | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.2 | ScalarmaxNumberOfDhcpRelay | read-only | mandatory | The maximum number of DHCP relay entries that can be created. A value of 0 for this object implies that there exists settings for global DHCP relay. |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.3 | ScalarmaxNumberOfDhcpRelayRemoteServer | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.4 | TabledhcpRelayRemoteServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.4.1 | RowdhcpRelayRemoteServerEntry | not-accessible | mandatory | An entry in dhcpRelayRemoteServerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.4.1.1 | ColumndhcpRelayVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.4.1.2 | ColumndhcpRelayRemoteServerIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.4.1.3 | ColumndhcpRelayRemoteServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.5 | TabledhcpRelayTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.5.1 | RowdhcpRelayEntry | not-accessible | mandatory | An entry in dhcpRelayTable. |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.5.1.1 | ColumndhcpRelayOption82Enable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.33.3.5.1.2 | ColumndhcpRelayInfoEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34 | NoderadiusServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.34.1 | NoderadiusAuthServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.34.1.1 | ScalarradiusAuthServerMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.1.2 | ScalarradiusAuthServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.1.3 | TableradiusAuthServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.1.3.1 | RowradiusAuthServerEntry | not-accessible | mandatory | An entry in radiusAuthServerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.34.1.3.1.1 | ColumnradiusAuthServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.1.3.1.2 | ColumnradiusAuthServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.1.3.1.3 | ColumnradiusAuthServerUdpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.1.3.1.4 | ColumnradiusAuthServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.2 | NoderadiusAcctServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.34.2.1 | ScalarradiusAcctServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.2.2 | TableradiusAcctServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.2.2.1 | RowradiusAcctServerEntry | not-accessible | mandatory | An entry in radiusAcctServerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.34.2.2.1.1 | ColumnradiusAcctServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.2.2.1.2 | ColumnradiusAcctServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.2.2.1.3 | ColumnradiusAcctServerUdpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.34.2.2.1.4 | ColumnradiusAcctServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35 | NodetacacsServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.35.1 | NodetacacsAuthServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.35.1.1 | ScalartacacsAuthServerMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.1.2 | ScalartacacsAuthServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.1.3 | TabletacacsAuthServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.1.3.1 | RowtacacsAuthServerEntry | not-accessible | mandatory | An entry in tacacsAuthServerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.35.1.3.1.1 | ColumntacacsAuthServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.1.3.1.2 | ColumntacacsAuthServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.1.3.1.3 | ColumntacacsAuthServerTcpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.1.3.1.4 | ColumntacacsAuthServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.2 | NodetacacsAcctServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.35.2.1 | ScalartacacsAcctServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.2.2 | TabletacacsAcctServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.2.2.1 | RowtacacsAcctServerEntry | not-accessible | mandatory | An entry in tacacsAcctServerTable. |
| 1.3.6.1.4.1.890.1.5.8.19.35.2.2.1.1 | ColumntacacsAcctServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.2.2.1.2 | ColumntacacsAcctServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.2.2.1.3 | ColumntacacsAcctServerTcpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.35.2.2.1.4 | ColumntacacsAcctServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36 | NodeaaaSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.36.1 | NodeauthenticationSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.36.1.1 | TableauthenticationTypeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.1.1.1 | RowauthenticationTypeEntry | not-accessible | mandatory | An entry in authenticationTypeTable. |
| 1.3.6.1.4.1.890.1.5.8.19.36.1.1.1.1 | ColumnauthenticationTypeName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.1.1.1.2 | ColumnauthenticationTypeMethodList | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2 | NodeaccountingSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.36.2.1 | ScalaraccountingUpdatePeriod | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2 | TableaccountingTypeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2.1 | RowaccountingTypeEntry | not-accessible | mandatory | An entry in accountingTypeTable. |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2.1.1 | ColumnaccountingTypeName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2.1.2 | ColumnaccountingTypeActive | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2.1.3 | ColumnaccountingTypeBroadcast | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2.1.4 | ColumnaccountingTypeMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2.1.5 | ColumnaccountingTypeMethod | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.36.2.2.1.6 | ColumnaccountingTypePrivilege | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.101 | Nodeipsg | |||
| 1.3.6.1.4.1.890.1.5.8.19.101.1 | TableipsgTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1 | RowipsgEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1.1 | ColumnipsgEntryMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1.2 | ColumnipsgEntryVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1.3 | ColumnipsgEntryIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1.4 | ColumnipsgEntryLease | read-only | mandatory | second |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1.5 | ColumnipsgEntryType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1.6 | ColumnipsgEntryPort | read-write | mandatory | 0 means any port |
| 1.3.6.1.4.1.890.1.5.8.19.101.1.1.7 | ColumnipsgEntryState | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102 | NodearpInspect | |||
| 1.3.6.1.4.1.890.1.5.8.19.102.1 | NodearpInspectSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.102.1.1 | ScalararpInspectState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.2 | ScalararpInspectFilterAgingTime | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.3 | NodearpInspectLog | |||
| 1.3.6.1.4.1.890.1.5.8.19.102.1.3.1 | ScalararpInspectLogEntries | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.3.2 | ScalararpInspectLogRate | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.3.3 | ScalararpInspectLogInterval | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.4 | TablearpInspectVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.4.1 | RowarpInspectVlanEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.4.1.1 | ColumnarpInspectVlanVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.4.1.2 | ColumnarpInspectVlanLog | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.4.1.3 | ColumnarpInspectVlanStatus | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.5 | TablearpInspectPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.5.1 | RowarpInspectPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.5.1.1 | ColumnarpInspectPortIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.1.5.1.2 | ColumnarpInspectPortTrust | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2 | NodearpInspectStatus | |||
| 1.3.6.1.4.1.890.1.5.8.19.102.2.1 | ScalararpInspectFilterClear | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.2 | ScalararpInspectLogClear | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3 | TablearpInspectFilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3.1 | RowarpInspectFilterEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3.1.1 | ColumnarpInspectFilterMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3.1.2 | ColumnarpInspectFilterVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3.1.3 | ColumnarpInspectFilterPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3.1.4 | ColumnarpInspectFilterExpiry | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3.1.5 | ColumnarpInspectFilterReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.3.1.6 | ColumnarpInspectFilterRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4 | TablearpInspectLogTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1 | RowarpInspectLogEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1.1 | ColumnarpInspectLogMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1.2 | ColumnarpInspectLogVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1.3 | ColumnarpInspectLogPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1.4 | ColumnarpInspectLogIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1.5 | ColumnarpInspectLogNumPkt | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1.6 | ColumnarpInspectLogReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.102.2.4.1.7 | ColumnarpInspectLogTime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.104 | NodeloopGuardSetup | |||
| 1.3.6.1.4.1.890.1.5.8.19.104.1 | ScalarloopGuardState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.104.2 | TableloopGuardPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.104.2.1 | RowloopGuardPortEntry | not-accessible | mandatory | An entry in loopGuardPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.104.2.1.1 | ColumnloopGuardPortState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.107 | Nodemstp | |||
| 1.3.6.1.4.1.890.1.5.8.19.107.1 | NodemstpGen | |||
| 1.3.6.1.4.1.890.1.5.8.19.107.1.1 | ScalarmstpGenState | read-write | mandatory | Enabled/disabled on the mrstp bridge. |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.2 | ScalarmstpGenCfgIdName | read-write | mandatory | The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.3 | ScalarmstpGenCfgIdRevLevel | read-write | mandatory | This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier. |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.4 | ScalarmstpGenCfgIdCfgDigest | read-only | mandatory | Configuration Digest. |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.5 | ScalarmstpGenHelloTime | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.6 | ScalarmstpGenMaxAge | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.7 | ScalarmstpGenForwardDelay | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.8 | ScalarmstpGenMaxHops | read-write | mandatory | 13.22.f) |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.9 | ScalarmstpGenCistRootPathCost | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.1.10 | ScalarmstpGenCistRootBrid | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.20 | TablemstMapTable | not-accessible | mandatory | This table contains one entry for each instance of MSTP. |
| 1.3.6.1.4.1.890.1.5.8.19.107.20.1 | RowmstMapEntry | not-accessible | mandatory | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.890.1.5.8.19.107.20.1.1 | ColumnmstMapIndex | not-accessible | mandatory | Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation |
| 1.3.6.1.4.1.890.1.5.8.19.107.20.1.2 | ColumnmstMapVlans1k | read-write | mandatory | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.890.1.5.8.19.107.20.1.3 | ColumnmstMapVlans2k | read-write | mandatory | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 10… |
| 1.3.6.1.4.1.890.1.5.8.19.107.20.1.4 | ColumnmstMapVlans3k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of… |
| 1.3.6.1.4.1.890.1.5.8.19.107.20.1.5 | ColumnmstMapVlans4k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 30… |
| 1.3.6.1.4.1.890.1.5.8.19.107.20.1.6 | ColumnmstMapRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.107.30 | TablemstVlanTable | not-accessible | mandatory | This table contains one entry for each VlanId. |
| 1.3.6.1.4.1.890.1.5.8.19.107.30.1 | RowmstVlanEntry | not-accessible | mandatory | Information regarding the instance to which each Vlan is mapped. |
| 1.3.6.1.4.1.890.1.5.8.19.107.30.1.1 | ColumnmstVlanIndex | not-accessible | mandatory | The VlanId for which this entry contains the instance mapped. |
| 1.3.6.1.4.1.890.1.5.8.19.107.30.1.2 | ColumnmstVlanMstIndex | read-only | mandatory | An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped |
| 1.3.6.1.4.1.890.1.5.8.19.107.40 | TablemstpPortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. |
| 1.3.6.1.4.1.890.1.5.8.19.107.40.1 | RowmstpPortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.890.1.5.8.19.107.40.1.1 | ColumnmstpPortIndex | not-accessible | mandatory | A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity… |
| 1.3.6.1.4.1.890.1.5.8.19.107.40.1.2 | ColumnmstpPortOperEdgePort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.107.40.1.3 | ColumnmstpPortOperPointToPointMAC | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.19.107.50 | TablemstpXstTable | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1 | RowmstpXstEntry | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1.1 | ColumnmstpXstId | read-only | mandatory | 0 means CIST. |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1.2 | ColumnmstpXstBridgePriority | read-write | mandatory | Bridge priority, in steps of 4096. |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1.3 | ColumnmstpXstBridgeId | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1.4 | ColumnmstpXstInternalRootCost | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1.5 | ColumnmstpXstRootPort | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1.6 | ColumnmstpXstTimeSinceTopologyChange | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.50.1.7 | ColumnmstpXstTopologyChangesCount | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60 | TablemstpXstPortTable | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1 | RowmstpXstPortEntry | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.1 | ColumnmstpXstPortXstId | not-accessible | mandatory | 0 means CIST. |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.2 | ColumnmstpXstPortIndex | read-only | mandatory | The value of mstpPortIndex of the Port in mstpPortTable. |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.3 | ColumnmstpXstPortEnable | read-write | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.4 | ColumnmstpXstPortPriority | read-write | mandatory | Port priority, in steps of 16. |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.5 | ColumnmstpXstPortPathCost | read-write | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.6 | ColumnmstpXstPortState | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.7 | ColumnmstpXstPortDesignatedRoot | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.8 | ColumnmstpXstPortDesignatedCost | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.9 | ColumnmstpXstPortDesignatedBridge | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.60.1.10 | ColumnmstpXstPortDesignatedPort | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.19.107.70 | NodemstpNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.19.107.70.1 | NotificationnewRoot | current | ||
| 1.3.6.1.4.1.890.1.5.8.19.107.70.2 | NotificationtopologyChange | current |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EventIdNumber | Integer32 | current | This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber. |
| EventPersistence | INTEGER{ normal (1), delta (2) } | current | This textual convention indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). |
| EventServiceAffective | INTEGER{ noServiceAffected (1), serviceAffected (2) } | current | This textual convention indicates whether an event is immediately service affecting or not. |
| EventSeverity | INTEGER{ critical (1), major (2), minor (3), informational (4) } | current | This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention. |
| InstanceType | INTEGER { unknown (1), node (2), shelf (3), line (4), switch (5), lsp (6), l2Interface(7), l3Interface(8), rowIndex(9) } | current | This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified below to enable… |
| MstiOrCistInstanceIndex | Integer32 (0..16) | mandatory | This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST). |
| UtcTimeStamp | Unsigned32 | current | Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM. |