ZYXEL-ES3124PWR-MIB
385 objects
Fault event table definitions
Imported Objects
| BRIDGE-MIB | dot1dBasePort |
| DISMAN-PING-MIB | -- RFC2851 OperationResponseStatus |
| IF-MIB | InterfaceIndexOrZero -- RFC2863 |
| INET-ADDRESS-MIB | -- RFC2571 InetAddressType InetAddress |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | -- RFC2579 DisplayString sysObjectID |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2578 RowStatus DateAndTime PhysAddress StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890 | Nodezyxel | |||
| 1.3.6.1.4.1.890.1 | Nodeproducts | |||
| 1.3.6.1.4.1.890.1.5 | NodeaccessSwitch | |||
| 1.3.6.1.4.1.890.1.5.8 | NodeesSeries | |||
| 1.3.6.1.4.1.890.1.5.8.14 | Nodees3124pwr | |||
| 1.3.6.1.4.1.890.1.5.8.14.1 | NodesysInfo | |||
| 1.3.6.1.4.1.890.1.5.8.14.1.1 | ScalarsysSwPlatformMajorVers | read-only | mandatory | SW platform major version, e.g. 3. |
| 1.3.6.1.4.1.890.1.5.8.14.1.2 | ScalarsysSwPlatformMinorVers | read-only | mandatory | SW platform minor version, e.g. 50. |
| 1.3.6.1.4.1.890.1.5.8.14.1.3 | ScalarsysSwModelString | read-only | mandatory | Model letters, e.g. TJ |
| 1.3.6.1.4.1.890.1.5.8.14.1.4 | ScalarsysSwVersionControlNbr | read-only | mandatory | Version control number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.14.1.5 | ScalarsysSwDay | read-only | mandatory | SW compilation day, e.g. 19. |
| 1.3.6.1.4.1.890.1.5.8.14.1.6 | ScalarsysSwMonth | read-only | mandatory | SW compilation month, e.g. 8. |
| 1.3.6.1.4.1.890.1.5.8.14.1.7 | ScalarsysSwYear | read-only | mandatory | SW compilation year, e.g. 2004. |
| 1.3.6.1.4.1.890.1.5.8.14.1.8 | ScalarsysHwMajorVers | read-only | mandatory | HW major version number, e.g. 1. |
| 1.3.6.1.4.1.890.1.5.8.14.1.9 | ScalarsysHwMinorVers | read-only | mandatory | HW minor version number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.14.1.10 | ScalarsysSerialNumber | read-only | mandatory | Serial number |
| 1.3.6.1.4.1.890.1.5.8.14.2 | NoderateLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.2.1 | ScalarrateLimitState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.14.2.2 | TablerateLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.2.2.1 | RowrateLimitPortEntry | not-accessible | mandatory | An entry in rateLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.2.2.1.1 | ColumnrateLimitPortState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.2.2.1.2 | ColumnrateLimitPortIngRate | read-write | mandatory | Ingress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000. |
| 1.3.6.1.4.1.890.1.5.8.14.2.2.1.3 | ColumnrateLimitPortEgrRate | read-write | mandatory | Egress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000. |
| 1.3.6.1.4.1.890.1.5.8.14.3 | NodebrLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.3.1 | ScalarbrLimitState | read-write | mandatory | Broadcast/multicast/DLF rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.14.3.2 | TablebrLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.3.2.1 | RowbrLimitPortEntry | not-accessible | mandatory | An entry in brLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.3.2.1.1 | ColumnbrLimitPortBrState | read-write | mandatory | Broadcast rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.3.2.1.2 | ColumnbrLimitPortBrRate | read-write | mandatory | Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.14.3.2.1.3 | ColumnbrLimitPortMcState | read-write | mandatory | Multicast rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.3.2.1.4 | ColumnbrLimitPortMcRate | read-write | mandatory | AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.14.3.2.1.5 | ColumnbrLimitPortDlfState | read-write | mandatory | Destination lookup failure frames rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.3.2.1.6 | ColumnbrLimitPortDlfRate | read-write | mandatory | Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.14.4 | NodeportSecuritySetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.4.1 | ScalarportSecurityState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.4.2 | TableportSecurityPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.4.2.1 | RowportSecurityPortEntry | not-accessible | mandatory | An entry in portSecurityPortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.4.2.1.1 | ColumnportSecurityPortState | read-write | mandatory | Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynami… |
| 1.3.6.1.4.1.890.1.5.8.14.4.2.1.2 | ColumnportSecurityPortLearnState | read-write | mandatory | MAC address learning enabled/disable on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.4.2.1.3 | ColumnportSecurityPortCount | read-write | mandatory | Number of (dynamic) MAC addresses that may be learned on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.4.3 | ScalarportSecurityMacFreeze | read-write | mandatory | This entry is used to execute MacFreeze action to port. It's meaningless while reading this entry. |
| 1.3.6.1.4.1.890.1.5.8.14.5 | NodevlanTrunkSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.5.1 | TablevlanTrunkPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.5.1.1 | RowvlanTrunkPortEntry | not-accessible | mandatory | An entry in vlanTrunkPortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.5.1.1.1 | ColumnvlanTrunkPortState | read-write | mandatory | VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch. |
| 1.3.6.1.4.1.890.1.5.8.14.6 | NodectlProtTransSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.6.1 | ScalarctlProtTransState | read-write | mandatory | Bridge control protocol transparency enabled/disabled for the switch |
| 1.3.6.1.4.1.890.1.5.8.14.6.2 | TablectlProtTransTunnelPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.6.2.1 | RowctlProtTransTunnelPortEntry | not-accessible | mandatory | An entry in ctlProtTransTunnelPortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.6.2.1.1 | ColumnctlProtTransTunnelMode | read-write | mandatory | Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3) |
| 1.3.6.1.4.1.890.1.5.8.14.7 | NodevlanStackSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.7.1 | ScalarvlanStackState | read-write | mandatory | VLAN Stacking enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.14.7.2 | ScalarvlanStackTpid | read-write | mandatory | SP TPID in hex format, e.g. 8100. |
| 1.3.6.1.4.1.890.1.5.8.14.7.3 | TablevlanStackPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.7.3.1 | RowvlanStackPortEntry | not-accessible | mandatory | An entry in vlanStackPortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.7.3.1.1 | ColumnvlanStackPortMode | read-write | mandatory | Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID a… |
| 1.3.6.1.4.1.890.1.5.8.14.7.3.1.2 | ColumnvlanStackPortVid | read-write | mandatory | VLAN ID used in service provider tag. |
| 1.3.6.1.4.1.890.1.5.8.14.7.3.1.3 | ColumnvlanStackPortPrio | read-write | mandatory | Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest. |
| 1.3.6.1.4.1.890.1.5.8.14.8 | Noderadius8021xSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.8.1 | ScalarradiusLoginPrecedence | read-write | mandatory | 1. Local Only 2. Local then RADIUS 3. RADIUS Only |
| 1.3.6.1.4.1.890.1.5.8.14.8.2 | NoderadiusAnd8021xServer | |||
| 1.3.6.1.4.1.890.1.5.8.14.8.2.1 | ScalarradiusIpAddr | read-write | mandatory | The IP address of the RADIUS server. |
| 1.3.6.1.4.1.890.1.5.8.14.8.2.2 | ScalarradiusUdpPort | read-write | mandatory | The UDP port of the RADIUS server. |
| 1.3.6.1.4.1.890.1.5.8.14.8.2.3 | ScalarradiusSharedSecret | read-write | mandatory | Shared secret used for RADIUS and network eleemnt authentication. |
| 1.3.6.1.4.1.890.1.5.8.14.8.3 | ScalarportAuthState | read-write | mandatory | 802.1x port authentication enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.14.8.4 | TableportAuthTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.8.4.1 | RowportAuthEntry | not-accessible | mandatory | An entry in portAuthTable. |
| 1.3.6.1.4.1.890.1.5.8.14.8.4.1.1 | ColumnportAuthEntryState | read-write | mandatory | 802.1x port authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.8.4.1.2 | ColumnportReAuthEntryState | read-write | mandatory | 802.1x port re-authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.14.8.4.1.3 | ColumnportReAuthEntryTimer | read-write | mandatory | Re-authentication timer in seconds. |
| 1.3.6.1.4.1.890.1.5.8.14.9 | NodehwMonitorInfo | |||
| 1.3.6.1.4.1.890.1.5.8.14.9.1 | TablefanRpmTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.14.9.1.1 | RowfanRpmEntry | not-accessible | current | An entry in fanRpmTable. |
| 1.3.6.1.4.1.890.1.5.8.14.9.1.1.1 | ColumnfanRpmIndex | read-only | current | Index of FAN. |
| 1.3.6.1.4.1.890.1.5.8.14.9.1.1.2 | ColumnfanRpmCurValue | read-only | current | Current speed in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.14.9.1.1.3 | ColumnfanRpmMaxValue | read-only | current | Maximum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.14.9.1.1.4 | ColumnfanRpmMinValue | read-only | current | Minimum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.14.9.1.1.5 | ColumnfanRpmLowThresh | read-only | current | The minimum speed at which a normal fan should work. |
| 1.3.6.1.4.1.890.1.5.8.14.9.1.1.6 | ColumnfanRpmDescr | read-only | current | 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed. |
| 1.3.6.1.4.1.890.1.5.8.14.9.2 | TabletempTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.14.9.2.1 | RowtempEntry | not-accessible | current | An entry in tempTable. |
| 1.3.6.1.4.1.890.1.5.8.14.9.2.1.1 | ColumntempIndex | read-only | current | Index of temperature unit. 1:MAC, 2:CPU, 3:PHY |
| 1.3.6.1.4.1.890.1.5.8.14.9.2.1.2 | ColumntempCurValue | read-only | current | The current temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.14.9.2.1.3 | ColumntempMaxValue | read-only | current | The maximum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.14.9.2.1.4 | ColumntempMinValue | read-only | current | The minimum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.14.9.2.1.5 | ColumntempHighThresh | read-only | current | The upper temperature limit at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.14.9.2.1.6 | ColumntempDescr | read-only | current | 'Normal' indicates temperatures below the threshold and 'Error' for those above. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3 | TablevoltageTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1 | RowvoltageEntry | not-accessible | current | An entry in voltageTable. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1.1 | ColumnvoltageIndex | read-only | current | Index of voltage. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1.2 | ColumnvoltageCurValue | read-only | current | The current voltage reading. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1.3 | ColumnvoltageMaxValue | read-only | current | The maximum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1.4 | ColumnvoltageMinValue | read-only | current | The minimum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1.5 | ColumnvoltageNominalValue | read-only | current | The normal voltage at wchich the switch work. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1.6 | ColumnvoltageLowThresh | read-only | current | The minimum voltage at which the switch should work. |
| 1.3.6.1.4.1.890.1.5.8.14.9.3.1.7 | ColumnvoltageDescr | read-only | current | 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed. |
| 1.3.6.1.4.1.890.1.5.8.14.10 | NodesnmpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.10.1 | ScalarsnmpGetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.10.2 | ScalarsnmpSetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.10.3 | ScalarsnmpTrapCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.10.4 | TablesnmpTrapDestTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.10.4.1 | RowsnmpTrapDestEntry | not-accessible | mandatory | An entry in snmpTrapDestTable. |
| 1.3.6.1.4.1.890.1.5.8.14.10.4.1.1 | ColumnsnmpTrapDestIP | read-write | mandatory | IP address of trap destination. |
| 1.3.6.1.4.1.890.1.5.8.14.10.4.1.2 | ColumnsnmpTrapDestRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.11 | NodedateTimeServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.11.1 | ScalardateTimeServerType | read-write | mandatory | The time service protocol. |
| 1.3.6.1.4.1.890.1.5.8.14.11.2 | ScalardateTimeServerIP | read-write | mandatory | IP address of time server. |
| 1.3.6.1.4.1.890.1.5.8.14.11.3 | ScalardateTimeZone | read-write | mandatory | The time difference between UTC. Ex: +01 |
| 1.3.6.1.4.1.890.1.5.8.14.11.4 | ScalardateTimeNewDateYear | read-write | mandatory | The new date in year. |
| 1.3.6.1.4.1.890.1.5.8.14.11.5 | ScalardateTimeNewDateMonth | read-write | mandatory | The new date in month. |
| 1.3.6.1.4.1.890.1.5.8.14.11.6 | ScalardateTimeNewDateDay | read-write | mandatory | The new date in day. |
| 1.3.6.1.4.1.890.1.5.8.14.11.7 | ScalardateTimeNewTimeHour | read-write | mandatory | The new time in hour. |
| 1.3.6.1.4.1.890.1.5.8.14.11.8 | ScalardateTimeNewTimeMinute | read-write | mandatory | The new time in minute. |
| 1.3.6.1.4.1.890.1.5.8.14.11.9 | ScalardateTimeNewTimeSecond | read-write | mandatory | The new time in second. |
| 1.3.6.1.4.1.890.1.5.8.14.12 | NodesysMgmt | |||
| 1.3.6.1.4.1.890.1.5.8.14.12.1 | ScalarsysMgmtConfigSave | read-write | mandatory | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config w… |
| 1.3.6.1.4.1.890.1.5.8.14.12.2 | ScalarsysMgmtBootupConfig | read-write | mandatory | The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can ch… |
| 1.3.6.1.4.1.890.1.5.8.14.12.3 | ScalarsysMgmtReboot | read-write | mandatory | Reboot switch from SNMP. 1:Reboot, 0:Nothing |
| 1.3.6.1.4.1.890.1.5.8.14.12.4 | ScalarsysMgmtDefaultConfig | read-write | mandatory | Erase running config and reset to default. |
| 1.3.6.1.4.1.890.1.5.8.14.12.5 | ScalarsysMgmtLastActionStatus | read-only | mandatory | Display status of last mgmt action. |
| 1.3.6.1.4.1.890.1.5.8.14.12.6 | ScalarsysMgmtSystemStatus | read-only | mandatory | This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultane… |
| 1.3.6.1.4.1.890.1.5.8.14.13 | Nodelayer2Setup | |||
| 1.3.6.1.4.1.890.1.5.8.14.13.1 | ScalarvlanTypeSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.13.2 | ScalarigmpSnoopingStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.13.3 | ScalartagVlanPortIsolationState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.13.4 | ScalarstpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14 | NodeipSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.14.1 | ScalardnsIpAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.2 | ScalardefaultMgmt | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.3 | NodeinbandIpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.14.3.1 | ScalarinbandIpType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.3.2 | ScalarinbandVid | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.3.3 | ScalarinbandStaticIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.3.4 | ScalarinbandStaticSubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.3.5 | ScalarinbandStaticGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.4 | NodeoutOfBandIpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.14.4.1 | ScalaroutOfBandIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.4.2 | ScalaroutOfBandSubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.4.3 | ScalaroutOfBandGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.5 | ScalarmaxNumOfInbandIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.6 | TableinbandIpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.6.1 | RowinbandIpEntry | not-accessible | mandatory | An entry in inbandIpTable. |
| 1.3.6.1.4.1.890.1.5.8.14.14.6.1.1 | ColumninbandEntryIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.6.1.2 | ColumninbandEntrySubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.6.1.3 | ColumninbandEntryGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.6.1.4 | ColumninbandEntryVid | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.6.1.5 | ColumninbandEntryManageable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.14.6.1.6 | ColumninbandEntryRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.15 | NodefilterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.15.1 | TablefilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.15.1.1 | RowfilterEntry | not-accessible | mandatory | An entry in filterTable. |
| 1.3.6.1.4.1.890.1.5.8.14.15.1.1.1 | ColumnfilterName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.15.1.1.2 | ColumnfilterActionState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.15.1.1.3 | ColumnfilterMacAddr | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.15.1.1.4 | ColumnfilterVid | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.15.1.1.5 | ColumnfilterRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.16 | NodemirrorSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.16.1 | ScalarmirrorState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.16.2 | ScalarmirrorMonitorPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.16.3 | TablemirrorTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.16.3.1 | RowmirrorEntry | not-accessible | mandatory | An entry in mirrorTable. |
| 1.3.6.1.4.1.890.1.5.8.14.16.3.1.1 | ColumnmirrorMirroredState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.16.3.1.2 | ColumnmirrorDirection | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17 | NodeaggrSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.17.1 | ScalaraggrState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.2 | ScalaraggrSystemPriority | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.3 | TableaggrGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.3.1 | RowaggrGroupEntry | not-accessible | mandatory | An entry in aggrGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.14.17.3.1.1 | ColumnaggrGroupIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.3.1.2 | ColumnaggrGroupState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.3.1.3 | ColumnaggrGroupDynamicState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.4 | TableaggrPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.4.1 | RowaggrPortEntry | not-accessible | mandatory | An entry in aggrPortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.17.4.1.1 | ColumnaggrPortGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.17.4.1.2 | ColumnaggrPortDynamicStateTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18 | NodeaccessCtlSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.18.1 | TableaccessCtlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.1.1 | RowaccessCtlEntry | not-accessible | mandatory | An entry in accessCtlTable. |
| 1.3.6.1.4.1.890.1.5.8.14.18.1.1.1 | ColumnaccessCtlService | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.1.1.2 | ColumnaccessCtlEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.1.1.3 | ColumnaccessCtlServicePort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.1.1.4 | ColumnaccessCtlTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.2 | TablesecuredClientTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.2.1 | RowsecuredClientEntry | not-accessible | mandatory | An entry in securedClientTable. |
| 1.3.6.1.4.1.890.1.5.8.14.18.2.1.1 | ColumnsecuredClientIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.2.1.2 | ColumnsecuredClientEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.2.1.3 | ColumnsecuredClientStartIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.2.1.4 | ColumnsecuredClientEndIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.18.2.1.5 | ColumnsecuredClientService | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.19 | NodequeuingMethodSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.19.1 | ScalarqueuingMethodType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.19.2 | TableportQueuingMethodTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.19.2.1 | RowportQueuingMethodEntry | not-accessible | mandatory | An entry in portQueuingMethodTable. |
| 1.3.6.1.4.1.890.1.5.8.14.19.2.1.1 | ColumnportQueuingMethodQueue | read-only | mandatory | 0...7 |
| 1.3.6.1.4.1.890.1.5.8.14.19.2.1.2 | ColumnportQueuingMethodWeight | read-write | mandatory | 0...100 |
| 1.3.6.1.4.1.890.1.5.8.14.20 | NodedhcpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.20.1 | NodedhcpRelay | |||
| 1.3.6.1.4.1.890.1.5.8.14.20.1.1 | ScalardhcpRelayEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.2 | ScalardhcpRelayOption82Enable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.3 | ScalardhcpRelayInfoEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.4 | ScalardhcpRelayInfoData | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.5 | ScalarmaxNumberOfDhcpRemoteServer | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.6 | TabledhcpRemoteServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.6.1 | RowdhcpRemoteServerEntry | not-accessible | mandatory | An entry in dhcpRemoteServerTable. |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.6.1.1 | ColumndhcpRemoteServerIp | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.20.1.6.1.2 | ColumndhcpRemoteServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21 | NodestaticRouteSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.21.1 | ScalarmaxNumberOfStaticRoutes | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21.2 | TablestaticRouteTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21.2.1 | RowstaticRouteEntry | not-accessible | mandatory | An entry in staticRouteTable. |
| 1.3.6.1.4.1.890.1.5.8.14.21.2.1.1 | ColumnstaticRouteName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21.2.1.2 | ColumnstaticRouteIp | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21.2.1.3 | ColumnstaticRouteMask | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21.2.1.4 | ColumnstaticRouteGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21.2.1.5 | ColumnstaticRouteMetric | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.21.2.1.6 | ColumnstaticRouteRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.22 | NodearpInfo | |||
| 1.3.6.1.4.1.890.1.5.8.14.22.1 | TablearpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.22.1.1 | RowarpEntry | not-accessible | mandatory | An entry in arpTable. |
| 1.3.6.1.4.1.890.1.5.8.14.22.1.1.1 | ColumnarpIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.22.1.1.2 | ColumnarpIpAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.22.1.1.3 | ColumnarpMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.22.1.1.4 | ColumnarpMacVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.22.1.1.5 | ColumnarpType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.23 | NodepltMgmt | |||
| 1.3.6.1.4.1.890.1.5.8.14.23.1 | TablepltCtlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.23.1.1 | RowpltCtlEntry | not-accessible | mandatory | An entry in pltCtlTable. |
| 1.3.6.1.4.1.890.1.5.8.14.23.1.1.1 | ColumnpltCtlInstType | not-accessible | mandatory | The type of the service instance that is tested. 1: VLAN |
| 1.3.6.1.4.1.890.1.5.8.14.23.1.1.2 | ColumnpltCtlInstId | not-accessible | mandatory | The ID of the service instance that is tested. |
| 1.3.6.1.4.1.890.1.5.8.14.23.1.1.3 | ColumnpltCtlIpAddr | read-create | mandatory | IP address of this PLT stack instance. |
| 1.3.6.1.4.1.890.1.5.8.14.23.1.1.4 | ColumnpltCtlMask | read-create | mandatory | IP subnet mask of this PLT stack instance. |
| 1.3.6.1.4.1.890.1.5.8.14.23.1.1.5 | ColumnpltCtlGw | read-create | mandatory | Default gateway IP address of this PLT stack instance. |
| 1.3.6.1.4.1.890.1.5.8.14.23.1.1.6 | ColumnpltCtlRowStatus | read-create | mandatory | This object allows entries to be created and deleted in the pltCtlTable. All value MUST be specified prior to a transition to active(1) state being accepted. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2 | TablepingCtlTable | not-accessible | current | Defines the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host. The results of these operations are stor… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1 | RowpingCtlEntry | not-accessible | current | Defines an entry in the pingCtlTable. The first index element, pingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the S… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.1 | ColumnpingCtlServInstType | not-accessible | mandatory | The type of the service instance that this ping entry belong to. 1: VLAN. This item would be used as an index |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.2 | ColumnpingCtlServInstId | not-accessible | mandatory | The ID of the service instance that this ping entry belong to. This item would be used as an index |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.3 | ColumnpingCtlOwnerIndex | not-accessible | current | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which mul… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.4 | ColumnpingCtlTestName | not-accessible | current | The name of the ping test. This is locally unique, within the scope of an pingCtlOwnerIndex. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.5 | ColumnpingCtlTargetAddressType | read-create | current | Specifies the type of host address to be used at a remote host for performing a ping operation. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.6 | ColumnpingCtlTargetAddress | read-create | current | Specifies the host address to be used at a remote host for performing a ping operation. The host address type is determined by the object value of correspondin… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.7 | ColumnpingCtlDataSize | read-create | current | Specifies the size of the data portion to be transmitted in a ping operation in octets. A ping request is usually an ICMP message encoded into an IP packet. An… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.8 | ColumnpingCtlTimeOut | read-create | current | Specifies the time-out value, in seconds, for a remote ping operation. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.9 | ColumnpingCtlProbeCount | read-create | current | Specifies the number of times to perform a ping operation at a remote host. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.10 | ColumnpingCtlAdminStatus | read-create | current | Reflects the desired state that a pingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this pingCtlEntry. disabled(2) - Deactivat… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.11 | ColumnpingCtlDataFill | read-create | current | The content of this object is used together with the corresponding pingCtlDataSize value to determine how to fill the data portion of a probe packet. The optio… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.12 | ColumnpingCtlFrequency | read-create | current | The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.13 | ColumnpingCtlMaxRows | read-create | current | The maximum number of entries allowed in the pingProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the pingProbeHistoryTable to … |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.14 | ColumnpingCtlStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.15 | ColumnpingCtlTrapGeneration | read-create | current | The value of this object determines when and if to generate a notification for this entry: probeFailure(0) - Generate a pingProbeFailed notification subject to… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.16 | ColumnpingCtlTrapProbeFailureFilter | read-create | current | The value of this object is used to determine when to generate a pingProbeFailed NOTIFICATION. Setting pingCtlTrapGeneration to probeFailure(0) implies that a … |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.17 | ColumnpingCtlTrapTestFailureFilter | read-create | current | The value of this object is used to determine when to generate a pingTestFailed NOTIFICATION. Setting pingCtlTrapGeneration to testFailure(1) implies that a pi… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.18 | ColumnpingCtlType | read-create | current | The value of this object is used to either report or select the implementation method to be used for calculating a ping response time. The value of this object… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.19 | ColumnpingCtlDescr | read-create | current | The purpose of this object is to provide a descriptive name of the remote ping test. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.20 | ColumnpingCtlSourceAddressType | read-create | current | Specifies the type of the source address, pingCtlSourceAddress, to be used at a remote host when performing a ping operation. |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.21 | ColumnpingCtlSourceAddress | read-create | current | Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than … |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.22 | ColumnpingCtlIfIndex | read-create | current | Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface.… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.23 | ColumnpingCtlByPassRouteTable | read-create | current | The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send direct… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.24 | ColumnpingCtlDSField | read-create | current | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe. The DS Field is defined as the Type… |
| 1.3.6.1.4.1.890.1.5.8.14.23.2.1.25 | ColumnpingCtlRowStatus | read-create | current | This object allows entries to be created and deleted in the pingCtlTable. Deletion of an entry in this table results in all corresponding (same pingCtlOwnerInd… |
| 1.3.6.1.4.1.890.1.5.8.14.23.3 | TablepingResultsTable | not-accessible | current | Defines the Ping Results Table for providing the capability of performing ping operations at a remote host. The results of these operations are stored in the p… |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1 | RowpingResultsEntry | not-accessible | current | Defines an entry in the pingResultsTable. The pingResultsTable has the same indexing as the pingCtlTable in order for a pingResultsEntry to correspond to the p… |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.1 | ColumnpingResultsOperStatus | read-only | current | Reflects the operational state of a pingCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped. |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.2 | ColumnpingResultsIpTargetAddressType | read-only | current | This objects indicates the type of address stored in the corresponding pingResultsIpTargetAddress object. |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.3 | ColumnpingResultsIpTargetAddress | read-only | current | This objects reports the IP address associated with a pingCtlTargetAddress value when the destination address is specified as a DNS name. The value of this obj… |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.4 | ColumnpingResultsMinRtt | read-only | current | The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.5 | ColumnpingResultsMaxRtt | read-only | current | The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.6 | ColumnpingResultsAverageRtt | read-only | current | The current average ping round-trip-time (RTT). |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.7 | ColumnpingResultsProbeResponses | read-only | current | Number of responses received for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probe responses ha… |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.8 | ColumnpingResultsSentProbes | read-only | current | The value of this object reflects the number of probes sent for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported … |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.9 | ColumnpingResultsRttSumOfSquares | read-only | current | This object contains the sum of the squares for all ping responses received. Its purpose is to enable standard deviation calculation. The value of this object … |
| 1.3.6.1.4.1.890.1.5.8.14.23.3.1.10 | ColumnpingResultsLastGoodProbe | read-only | current | Date and time when the last response was received for a probe. |
| 1.3.6.1.4.1.890.1.5.8.14.23.4 | TablepingProbeHistoryTable | not-accessible | current | Defines a table for storing the results of a ping operation. Entries in this table are limited by the value of the corresponding pingCtlMaxRows object. An entr… |
| 1.3.6.1.4.1.890.1.5.8.14.23.4.1 | RowpingProbeHistoryEntry | not-accessible | current | Defines an entry in the pingProbeHistoryTable. The first two index elements identify the pingCtlEntry that a pingProbeHistoryEntry belongs to. The third index … |
| 1.3.6.1.4.1.890.1.5.8.14.23.4.1.1 | ColumnpingProbeHistoryIndex | not-accessible | current | An entry in this table is created when the result of a ping probe is determined. The initial 2 instance identifier index values identify the pingCtlEntry that … |
| 1.3.6.1.4.1.890.1.5.8.14.23.4.1.2 | ColumnpingProbeHistoryResponse | read-only | current | The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is repo… |
| 1.3.6.1.4.1.890.1.5.8.14.23.4.1.3 | ColumnpingProbeHistoryStatus | read-only | current | The result of a particular probe done by a remote host. |
| 1.3.6.1.4.1.890.1.5.8.14.23.4.1.4 | ColumnpingProbeHistoryLastRC | read-only | current | The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is re… |
| 1.3.6.1.4.1.890.1.5.8.14.23.4.1.5 | ColumnpingProbeHistoryTime | read-only | current | Timestamp for when this probe result was determined. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5 | TabletraceRouteCtlTable | not-accessible | current | Defines the Remote Operations Traceroute Control Table for providing the capability of invoking traceroute from a remote host. The results of traceroute operat… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1 | RowtraceRouteCtlEntry | not-accessible | current | Defines an entry in the traceRouteCtlTable. The first index element, traceRouteCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for … |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.1 | ColumntraceRouteCtlServInstType | not-accessible | mandatory | The type of the service instance that this traceRoute entry belong to. 1: VLAN. This item would be used as an index |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.2 | ColumntraceRouteCtlServInstId | not-accessible | mandatory | The ID of the service instance that this traceRoute entry belong to. This item would be used as an index |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.3 | ColumntraceRouteCtlOwnerIndex | not-accessible | current | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which mul… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.4 | ColumntraceRouteCtlTestName | not-accessible | current | The name of a traceroute test. This is locally unique, within the scope of an traceRouteCtlOwnerIndex. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.5 | ColumntraceRouteCtlTargetAddressType | read-create | current | Specifies the type of host address to be used on the traceroute request at the remote host. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.6 | ColumntraceRouteCtlTargetAddress | read-create | current | Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresp… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.7 | ColumntraceRouteCtlByPassRouteTable | read-create | current | The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send direct… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.8 | ColumntraceRouteCtlDataSize | read-create | current | Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by encoding a UDP datagram into a IP … |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.9 | ColumntraceRouteCtlTimeOut | read-create | current | Specifies the time-out value, in seconds, for a traceroute request. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.10 | ColumntraceRouteCtlProbesPerHop | read-create | current | Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.11 | ColumntraceRouteCtlPort | read-create | current | Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for thi… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.12 | ColumntraceRouteCtlMaxTtl | read-create | current | Specifies the maximum time-to-live value. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.13 | ColumntraceRouteCtlDSField | read-create | current | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as th… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.14 | ColumntraceRouteCtlSourceAddressType | read-create | current | Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.15 | ColumntraceRouteCtlSourceAddress | read-create | current | Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.16 | ColumntraceRouteCtlIfIndex | read-create | current | Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specifie… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.17 | ColumntraceRouteCtlMiscOptions | read-create | current | Enables an application to specify implementation dependent options. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.18 | ColumntraceRouteCtlMaxFailures | read-create | current | The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of either 255 (ma… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.19 | ColumntraceRouteCtlDontFragment | read-create | current | This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing a manual PATH MTU test. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.20 | ColumntraceRouteCtlInitialTtl | read-create | current | The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.21 | ColumntraceRouteCtlFrequency | read-create | current | The number of seconds to wait before repeating a traceroute test as defined by the value of the various objects in the corresponding row. The number of hops in… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.22 | ColumntraceRouteCtlStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.23 | ColumntraceRouteCtlAdminStatus | read-create | current | Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabled(2… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.24 | ColumntraceRouteCtlDescr | read-create | current | The purpose of this object is to provide a descriptive name of the remote traceroute test. |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.25 | ColumntraceRouteCtlMaxRows | read-create | current | The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the traceRouteProbeHist… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.26 | ColumntraceRouteCtlTrapGeneration | read-create | current | The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a traceRoutePathChange notification when… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.27 | ColumntraceRouteCtlCreateHopsEntries | read-create | current | The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is true(1). |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.28 | ColumntraceRouteCtlType | read-create | current | The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this objec… |
| 1.3.6.1.4.1.890.1.5.8.14.23.5.1.29 | ColumntraceRouteCtlRowStatus | read-create | current | This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in all corresponding (same traceRout… |
| 1.3.6.1.4.1.890.1.5.8.14.23.6 | TabletraceRouteResultsTable | not-accessible | current | Defines the Remote Operations Traceroute Results Table for keeping track of the status of a traceRouteCtlEntry. An entry is added to the traceRouteResultsTable… |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1 | RowtraceRouteResultsEntry | not-accessible | current | Defines an entry in the traceRouteResultsTable. The traceRouteResultsTable has the same indexing as the traceRouteCtlTable in order for a traceRouteResultsEntr… |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.1 | ColumntraceRouteResultsOperStatus | read-only | current | Reflects the operational state of an traceRouteCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped. |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.2 | ColumntraceRouteResultsCurHopCount | read-only | current | Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by traceRouteCtlMaxTtl. |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.3 | ColumntraceRouteResultsCurProbeCount | read-only | current | Reflects the current probe count (1..10) for a remote traceroute operation. The maximum probe count is determined by traceRouteCtlProbesPerHop. |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.4 | ColumntraceRouteResultsIpTgtAddrType | read-only | current | This objects indicates the type of address stored in the corresponding traceRouteResultsIpTgtAddr object. |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.5 | ColumntraceRouteResultsIpTgtAddr | read-only | current | This objects reports the IP address associated with a traceRouteCtlTargetAddress value when the destination address is specified as a DNS name. The value of th… |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.6 | ColumntraceRouteResultsTestAttempts | read-only | current | The current number of attempts to determine a path to a target. The value of this object MUST be started at 0. |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.7 | ColumntraceRouteResultsTestSuccesses | read-only | current | The current number of attempts to determine a path to a target that have succeeded. The value of this object MUST be reported as 0 when no attempts have succee… |
| 1.3.6.1.4.1.890.1.5.8.14.23.6.1.8 | ColumntraceRouteResultsLastGoodPath | read-only | current | The date and time when the last complete path was determined. |
| 1.3.6.1.4.1.890.1.5.8.14.23.7 | TabletraceRouteProbeHistoryTable | not-accessible | current | Defines the Remote Operations Traceroute Results Table for storing the results of a traceroute operation. An implementation of this MIB will remove the oldest … |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1 | RowtraceRouteProbeHistoryEntry | not-accessible | current | Defines a table for storing the results of a traceroute operation. Entries in this table are limited by the value of the corresponding traceRouteCtlMaxRows obj… |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.1 | ColumntraceRouteProbeHistoryIndex | not-accessible | current | An entry in this table is created when the result of a traceroute probe is determined. The initial 2 instance identifier index values identify the traceRouteCt… |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.2 | ColumntraceRouteProbeHistoryHopIndex | not-accessible | current | Indicates which hop in a traceroute path that the probe's results are for. The value of this object is initially determined by the value of traceRouteCtlInitia… |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.3 | ColumntraceRouteProbeHistoryProbeIndex | not-accessible | current | Indicates the index of a probe for a particular hop in a traceroute path. The number of probes per hop is determined by the value of the corresponding traceRou… |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.4 | ColumntraceRouteProbeHistoryHAddrType | read-only | current | This objects indicates the type of address stored in the corresponding traceRouteProbeHistoryHAddr object. |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.5 | ColumntraceRouteProbeHistoryHAddr | read-only | current | The address of a hop in a traceroute path. This object is not allowed to be a DNS name. The value of the corresponding object, traceRouteProbeHistoryHAddrType,… |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.6 | ColumntraceRouteProbeHistoryResponse | read-only | current | The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is repo… |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.7 | ColumntraceRouteProbeHistoryStatus | read-only | current | The result of a traceroute operation made by a remote host for a particular probe. |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.8 | ColumntraceRouteProbeHistoryLastRC | read-only | current | The last implementation method specific reply code received. Traceroute is usually implemented by transmitting a series of probe packets with increasing time-t… |
| 1.3.6.1.4.1.890.1.5.8.14.23.7.1.9 | ColumntraceRouteProbeHistoryTime | read-only | current | Timestamp for when this probe results were determined. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8 | TabletraceRouteHopsTable | not-accessible | current | Defines the Remote Operations Traceroute Hop Table for keeping track of the results of traceroute tests on a per hop basis. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1 | RowtraceRouteHopsEntry | not-accessible | current | Defines an entry in the traceRouteHopsTable. The first two index elements identify the traceRouteCtlEntry that a traceRouteHopsEntry belongs to. The third inde… |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.1 | ColumntraceRouteHopsHopIndex | not-accessible | current | Specifies the hop index for a traceroute hop. Values for this object with respect to the same traceRouteCtlOwnerIndex and traceRouteCtlTestName MUST start at 1… |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.2 | ColumntraceRouteHopsIpTgtAddressType | read-only | current | This objects indicates the type of address stored in the corresponding traceRouteHopsIpTargetAddress object. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.3 | ColumntraceRouteHopsIpTgtAddress | read-only | current | This object reports the IP address associated with the hop. A value for this object should be reported as a numeric IP address and not as a DNS name. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.4 | ColumntraceRouteHopsMinRtt | read-only | current | The minimum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.5 | ColumntraceRouteHopsMaxRtt | read-only | current | The maximum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.6 | ColumntraceRouteHopsAverageRtt | read-only | current | The current average traceroute round-trip-time (RTT) for this hop. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.7 | ColumntraceRouteHopsRttSumOfSquares | read-only | current | This object contains the sum of all traceroute responses received for this hop. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.8 | ColumntraceRouteHopsSentProbes | read-only | current | The value of this object reflects the number of probes sent for this hop during this traceroute test. The value of this object should start at 0. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.9 | ColumntraceRouteHopsProbeResponses | read-only | current | Number of responses received for this hop during this traceroute test. This value of this object should start at 0. |
| 1.3.6.1.4.1.890.1.5.8.14.23.8.1.10 | ColumntraceRouteHopsLastGoodProbe | read-only | current | Date and time was the last response was received for a probe for this hop during this traceroute test. |
| 1.3.6.1.4.1.890.1.5.8.14.24 | NodeportOpModeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.24.1 | TableportOpModePortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1 | RowportOpModePortEntry | not-accessible | mandatory | An entry in portOpModePortTable. |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1.1 | ColumnportOpModePortSpeedDuplex | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1.2 | ColumnportOpModePortFlowCntl | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1.3 | ColumnportOpModePortName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1.4 | ColumnportOpModePortModuleType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1.5 | ColumnportOpModePortLinkUpType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1.6 | ColumnportOpModePortIntrusionLock | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.24.1.1.7 | ColumnportOpModePortLBTestStatus | read-only | mandatory | This entry display latest loopback test status of port while performing loopback test. |
| 1.3.6.1.4.1.890.1.5.8.14.25 | NodeportBasedVlanSetup | |||
| 1.3.6.1.4.1.890.1.5.8.14.25.1 | TableportBasedVlanPortListTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.25.1.1 | RowportBasedVlanPortListEntry | not-accessible | mandatory | An entry in portBasedVlanPortListTable. |
| 1.3.6.1.4.1.890.1.5.8.14.25.1.1.1 | ColumnportBasedVlanPortListMembers | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.14.26 | IdentityfaultMIB | Fault event table definitions | ||
| 1.3.6.1.4.1.890.1.5.8.14.26.1 | NodeeventObjects | |||
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1 | TableeventTable | not-accessible | current | A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault… |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1 | RoweventEntry | not-accessible | current | An entry containing information about an event in the event table. |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.1 | ColumneventSeqNum | read-only | current | This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps a… |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.2 | ColumneventEventId | read-only | current | This variable represents the event ID which uniquely identifies the event in the entire system. |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.3 | ColumneventName | read-only | current | This variable represents the name of the event, for example 'Ethernet Link Down' |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.4 | ColumneventInstanceType | read-only | current | This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generat… |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.5 | ColumneventInstanceId | read-only | current | This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this e… |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.6 | ColumneventInstanceName | read-only | current | This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooli… |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.7 | ColumneventSeverity | read-only | current | This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events a… |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.8 | ColumneventSetTime | read-only | current | This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM. |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.9 | ColumneventDescription | read-only | current | This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating… |
| 1.3.6.1.4.1.890.1.5.8.14.26.1.1.1.10 | ColumneventServAffective | read-only | current | This variable indicates whether the event is service affective or not |
| 1.3.6.1.4.1.890.1.5.8.14.27 | IdentityfaultTrapsMIB | Fault event trap definitions | ||
| 1.3.6.1.4.1.890.1.5.8.14.27.1 | NodetrapInfoObjects | |||
| 1.3.6.1.4.1.890.1.5.8.14.27.1.1 | ScalartrapRefSeqNum | read-only | current | Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.14.27.1.2 | ScalartrapPersistence | read-only | current | Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap … |
| 1.3.6.1.4.1.890.1.5.8.14.27.1.3 | ScalartrapSenderNodeId | read-only | current | Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.14.27.2 | NodetrapNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.14.27.2.1 | NotificationeventOnTrap | current | This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not… | |
| 1.3.6.1.4.1.890.1.5.8.14.27.2.2 | NotificationeventClearedTrap | current | This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqN… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EventIdNumber | Integer32 | current | This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber. |
| EventPersistence | INTEGER{ normal (1), delta (2) } | current | This textual convention indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). |
| EventServiceAffective | INTEGER{ noServiceAffected (1), serviceAffected (2) } | current | This textual convention indicates whether an event is immediately service affecting or not. |
| EventSeverity | INTEGER{ critical (1), major (2), minor (3), informational (4) } | current | This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention. |
| InstanceType | INTEGER { unknown (1), node (2), shelf (3), line (4), switch (5), lsp (6), l2Interface(7), l3Interface(8), rowIndex(9) } | current | This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified below to enable… |
| UtcTimeStamp | Unsigned32 | current | Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM. |