ZYXEL-HW-MONITOR-MIB
54 objects
The subtree for hardware monitor
Imported Objects
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| ZYXEL-ES-SMI | esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.26 | IdentityzyxelHwMonitor | The subtree for hardware monitor | ||
| 1.3.6.1.4.1.890.1.15.3.26.1 | NodezyxelHwMonitorStatus | |||
| 1.3.6.1.4.1.890.1.15.3.26.1.1 | TablezyxelHwMonitorFanRpmTable | not-accessible | current | The table contains HW monitor fan information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1 | RowzyxelHwMonitorFanRpmEntry | not-accessible | current | An entry contains HW monitor fan information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1.1 | ColumnzyHwMonitorFanRpmIndex | not-accessible | current | Index of fan. |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1.2 | ColumnzyHwMonitorFanRpmDescription | read-only | current | Fan Description |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1.3 | ColumnzyHwMonitorFanRpmCurrentValue | read-only | current | Current speed in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1.4 | ColumnzyHwMonitorFanRpmMaxValue | read-only | current | Maximum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1.5 | ColumnzyHwMonitorFanRpmMinValue | read-only | current | Minimum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1.6 | ColumnzyHwMonitorFanRpmLowThreshold | read-only | current | The minimum speed at which a normal fan should work. |
| 1.3.6.1.4.1.890.1.15.3.26.1.1.1.7 | ColumnzyHwMonitorFanRpmStatus | read-only | current | 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2 | TablezyxelHwMonitorTemperatureTable | not-accessible | current | The table contains HW monitor temperature information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1 | RowzyxelHwMonitorTemperatureEntry | not-accessible | current | An entry contains HW temperature information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1.1 | ColumnzyHwMonitorTemperatureIndex | not-accessible | current | Index of temperature unit. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1.2 | ColumnzyHwMonitorTemperatureDescription | read-only | current | Temperature Description |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1.3 | ColumnzyHwMonitorTemperatureCurrentValue | read-only | current | The current temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1.4 | ColumnzyHwMonitorTemperatureMaxValue | read-only | current | The maximum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1.5 | ColumnzyHwMonitorTemperatureMinValue | read-only | current | The minimum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1.6 | ColumnzyHwMonitorTemperatureHighThreshold | read-only | current | The upper temperature limit at this sensor. |
| 1.3.6.1.4.1.890.1.15.3.26.1.2.1.7 | ColumnzyHwMonitorTemperatureStatus | read-only | current | 'Normal' indicates temperatures below the threshold and 'Error' for those above. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3 | TablezyxelHwMonitorVoltageTable | not-accessible | current | The table contains HW monitor voltage information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1 | RowzyxelHwMonitorVoltageEntry | not-accessible | current | An entry contains HW voltage information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.1 | ColumnzyHwMonitorVoltageIndex | not-accessible | current | Index of voltage. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.2 | ColumnzyHwMonitorVoltageDescription | read-only | current | Voltage Description |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.3 | ColumnzyHwMonitorVoltageCurrentValue | read-only | current | The current voltage reading. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.4 | ColumnzyHwMonitorVoltageMaxValue | read-only | current | The maximum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.5 | ColumnzyHwMonitorVoltageMinValue | read-only | current | The minimum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.6 | ColumnzyHwMonitorVoltageNominalValue | read-only | current | The normal voltage at which the switch work. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.7 | ColumnzyHwMonitorVoltageLowThreshold | read-only | current | The minimum voltage at which the switch should work. |
| 1.3.6.1.4.1.890.1.15.3.26.1.3.1.8 | ColumnzyHwMonitorVoltageStatus | read-only | current | 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed. |
| 1.3.6.1.4.1.890.1.15.3.26.1.4 | NodezyxelHwMonitorPowerSource | |||
| 1.3.6.1.4.1.890.1.15.3.26.1.4.1 | ScalarzyHwMonitorPowerSourceMode | read-only | current | The current power source reading (AC prefer, load-sharing). |
| 1.3.6.1.4.1.890.1.15.3.26.1.4.2 | TablezyxelHwMonitorPowerSourceTable | not-accessible | current | The table contains HW monitor power source information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.4.2.1 | RowzyxelHwMonitorPowerSourceEntry | not-accessible | current | An entry contains HW power source information. |
| 1.3.6.1.4.1.890.1.15.3.26.1.4.2.1.1 | ColumnzyHwMonitorPowerSourceIndex | not-accessible | current | Index of power source. |
| 1.3.6.1.4.1.890.1.15.3.26.1.4.2.1.2 | ColumnzyHwMonitorPowerSourceType | read-only | current | The current power source type (AC/DC). |
| 1.3.6.1.4.1.890.1.15.3.26.1.4.2.1.3 | ColumnzyHwMonitorPowerSourceStatus | read-only | current | The current power source status (normal, error, absent, present, active, standby, N/A). |
| 1.3.6.1.4.1.890.1.15.3.26.1.4.2.1.4 | ColumnzyHwMonitorPowerSourceDescription | read-only | current | Power source Description. |
| 1.3.6.1.4.1.890.1.15.3.26.1.4.2.1.5 | ColumnzyHwMonitorPowerSourcePreviousStatus | read-only | current | Power source Previous Status (normal/error/absent/present). |
| 1.3.6.1.4.1.890.1.15.3.26.2 | NodezyxelHwMonitorNotifications | |||
| 1.3.6.1.4.1.890.1.15.3.26.2.1 | NotificationzyHwMonitorFanSpeedOutOfRange | current | Fan speed is out of the normal operation range. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.2 | NotificationzyHwMonitorTemperatureOutOfRange | current | Temperature is out of the normal operation range. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.3 | NotificationzyHwMonitorPowerSupplyVoltageOutOfRange | current | Power supply voltage is out of the normal operation range. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.4 | NotificationzyHwMonitorBackupPowerSupplyInUse | current | Backup power in use is fault. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.5 | NotificationzyHwMonitorDyingGasp | current | Unexpected power down or low power is detected. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.6 | NotificationzyHwMonitorFanAirFlowInconsistency | current | FAN airflows are inconsistent. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.7 | NotificationzyHwMonitorFanSpeedOutOfRangeRecovered | current | Fan speed is recovered from out of the normal operation range. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.8 | NotificationzyHwMonitorTemperatureOutOfRangeRecovered | current | Temperature is recovered from out of the normal operation range. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.9 | NotificationzyHwMonitorPowerSupplyVoltageOutOfRangeRecovered | current | Power supply voltage is recovered from out of the normal operation range. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.10 | NotificationzyHwMonitorPowerSourceAbnormal | current | Power source status is change. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.11 | NotificationzyHwMonitorPowerSourceAbnormalRecovered | current | Power source status change to normal. | |
| 1.3.6.1.4.1.890.1.15.3.26.2.12 | NotificationzyHwMonitorPowerSourceStatusChange | current | Check power source status change situation. | |
| 1.3.6.1.4.1.890.1.15.3.26.3 | NodezyxelHwMonitorTrapInfoObject | |||
| 1.3.6.1.4.1.890.1.15.3.26.3.1 | ScalarzyHwMonitorTrapPowerSourceErrorType | not-accessible | current | There are the error type of power source. |