MIB Viewer

ZYXEL-IES1248

638 objects
IES-1248-51 (3.53(ABQ.0)) MIB
Imported Objects
BRIDGE-MIBBridgeId dot1dBasePort Timeout
P-BRIDGE-MIBdot1dTrafficClass
Q-BRIDGE-MIBdot1qVlanIndex PortList VlanIndex
RFC1155-SMIenterprises IpAddress TimeTicks
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-SMICounter32 Counter64 Gauge32 NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCMacAddress RowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.890Nodezyxel
1.3.6.1.4.1.890.1Nodeproducts
1.3.6.1.4.1.890.1.5NodeaccessSwitch
1.3.6.1.4.1.890.1.5.13NodeiesSeries
1.3.6.1.4.1.890.1.5.13.6Identityies1248IES-1248-51 (3.53(ABQ.0)) MIB
1.3.6.1.4.1.890.1.5.13.6.2Nodealarmconf
1.3.6.1.4.1.890.1.5.13.6.2.1ScalaralarmOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.890.1.5.13.6.2.2TablealarmConfTablenot-accessiblecurrentThis table includes alarm configuration.
1.3.6.1.4.1.890.1.5.13.6.2.2.1RowalarmConfEntrynot-accessiblecurrentAn entry in alarmConfTable.
1.3.6.1.4.1.890.1.5.13.6.2.2.1.1ColumnalarmConfIdread-onlycurrent5000:adslLine_up 5001:adslLine_down 5002:adslPerf_lol_thresh 5003:adslPerf_lof_thresh 5004:adslPerf_los_thresh 5005:adslPerf_lop_thresh 5006:adslPerf_es_thresh…
1.3.6.1.4.1.890.1.5.13.6.2.2.1.2ColumnalarmConfFacilityread-writecurrentAlarm facility.
1.3.6.1.4.1.890.1.5.13.6.2.2.1.3ColumnalarmConfTargetread-writecurrentThe destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
1.3.6.1.4.1.890.1.5.13.6.2.2.1.4ColumnalarmConfSeverityread-writecurrentAlarm severity
1.3.6.1.4.1.890.1.5.13.6.2.2.1.5ColumnalarmConfClearableread-writecurrentSetting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
1.3.6.1.4.1.890.1.5.13.6.2.3TablealarmCurrTablenot-accessiblecurrentThis table includes current alarm information.
1.3.6.1.4.1.890.1.5.13.6.2.3.1RowalarmCurrEntrynot-accessiblecurrentAn entry in alarmCurrTable.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.1ColumnalarmCurrIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.2ColumnalarmCurrOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.3ColumnalarmCurrTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.4ColumnalarmCurrParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.5ColumnalarmCurrParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.6ColumnalarmCurrParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.7ColumnalarmCurrParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.8ColumnalarmCurrParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.9ColumnalarmCurrParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.10ColumnalarmCurrParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.11ColumnalarmCurrParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.12ColumnalarmCurrTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.890.1.5.13.6.2.3.1.13ColumnalarmCurrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.3.1.14ColumnalarmCurrDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.890.1.5.13.6.2.4TablealarmSeverityPortTablenot-accessiblecurrentThis table includes the configuration of alarm reporting severity threshold for each port.
1.3.6.1.4.1.890.1.5.13.6.2.4.1RowalarmSeverityPortEntrynot-accessiblecurrentAn entry in alarmSeverityPortTable.
1.3.6.1.4.1.890.1.5.13.6.2.4.1.1ColumnseverityThreshread-writecurrentThe minimum alarm severity that is reported.
1.3.6.1.4.1.890.1.5.13.6.4Nodediagnostic
1.3.6.1.4.1.890.1.5.13.6.4.3Nodeselt
1.3.6.1.4.1.890.1.5.13.6.4.3.1ScalarseltTargetread-writecurrentIfIndex of the port which would be performed single end loopback test.
1.3.6.1.4.1.890.1.5.13.6.4.3.2ScalarseltOpsread-writecurrentThe manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
1.3.6.1.4.1.890.1.5.13.6.4.3.3ScalarseltStatusread-onlycurrentStatus description of the selt result.
1.3.6.1.4.1.890.1.5.13.6.4.3.4ScalarseltCableTyperead-onlycurrentThe cable type that selt result indicates.
1.3.6.1.4.1.890.1.5.13.6.4.3.5ScalarseltLoopEstimateLengthFtread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.13.6.4.3.6ScalarseltLoopEstimateLengthMeterread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.13.6.7Nodemulticast
1.3.6.1.4.1.890.1.5.13.6.7.1ScalarigmpEnableread-writecurrentEnable/disable IGMP protocol.
1.3.6.1.4.1.890.1.5.13.6.7.4NodemcastBandwidth
1.3.6.1.4.1.890.1.5.13.6.7.4.1ScalarmcastDefaultBandwidthread-writecurrentDefault bandwidth requirement for a multicast channel.
1.3.6.1.4.1.890.1.5.13.6.7.4.2ScalarmaxNumOfMcastBwread-onlycurrentThe maximum number of row entries that user can create in mcastBwTable.
1.3.6.1.4.1.890.1.5.13.6.7.4.3TablemcastBwTablenot-accessiblecurrentThis table defines bandwidth budget for a range of multicast IP channels.
1.3.6.1.4.1.890.1.5.13.6.7.4.3.1RowmcastBwEntrynot-accessiblecurrentAn entry of mcastBwTable.
1.3.6.1.4.1.890.1.5.13.6.7.4.3.1.1ColumnmcastBwIndexread-onlycurrentThe index which specify the entry.
1.3.6.1.4.1.890.1.5.13.6.7.4.3.1.2ColumnmcastBwStartIpread-onlycurrentThe start multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.13.6.7.4.3.1.3ColumnmcastBwEndIpread-onlycurrentThe end multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.13.6.7.4.3.1.4ColumnmcastBwBandwidthread-createcurrentThe bandwidth budget for the multicast IP channels.
1.3.6.1.4.1.890.1.5.13.6.7.4.3.1.5ColumnmcastBwRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.6.7.4.4TablemcastBwPortTablenot-accessiblecurrentThis table specify the multicast bandwidth control of the port.
1.3.6.1.4.1.890.1.5.13.6.7.4.4.1RowmcastBwPortEntrynot-accessiblecurrentAn entry of mcastBwPortTable.
1.3.6.1.4.1.890.1.5.13.6.7.4.4.1.1ColumnmcastBwPortEnableread-writecurrentEnable/disable multicast bandwidth control for a port.
1.3.6.1.4.1.890.1.5.13.6.7.4.4.1.2ColumnmcastBwPortBandwidthread-writecurrentSet bandwidth threshold for a port.
1.3.6.1.4.1.890.1.5.13.6.7.5NodeigmpCount
1.3.6.1.4.1.890.1.5.13.6.7.5.1TableigmpCountPortTablenot-accessiblecurrentThis table specify the IGMP count limiting of the port.
1.3.6.1.4.1.890.1.5.13.6.7.5.1.1RowigmpCountPortEntrynot-accessiblecurrentAn entry of igmpCountPortTable.
1.3.6.1.4.1.890.1.5.13.6.7.5.1.1.1ColumnigmpCountPortEnableread-writecurrentEnable/disable IGMP count limiting for a port.
1.3.6.1.4.1.890.1.5.13.6.7.5.1.1.2ColumnigmpCountPortLimitread-writecurrentThe maximum allowed IGMP report count for a port.
1.3.6.1.4.1.890.1.5.13.6.7.6Nodemvlan
1.3.6.1.4.1.890.1.5.13.6.7.6.1ScalarmaxNumOfMvlanread-onlycurrentThe maximum number of row entries that user can create in mvlanTable.
1.3.6.1.4.1.890.1.5.13.6.7.6.2TablemvlanTablenot-accessiblecurrentA table containing static configuration information for each multicast VLAN configured into the device.
1.3.6.1.4.1.890.1.5.13.6.7.6.2.1RowmvlanEntrynot-accessiblecurrentAn entry of mvlanTable.
1.3.6.1.4.1.890.1.5.13.6.7.6.2.1.1ColumnmvlanIndexread-onlycurrentThe VLAN-ID refering to this VLAN.
1.3.6.1.4.1.890.1.5.13.6.7.6.2.1.2ColumnmvlanNameread-createcurrentAn administratively assigned string, which may be used to identify the VLAN.
1.3.6.1.4.1.890.1.5.13.6.7.6.2.1.3ColumnmvlanEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this multicast VLAN.
1.3.6.1.4.1.890.1.5.13.6.7.6.2.1.4ColumnmvlanUntaggedPortsread-createcurrentThe set of ports which should transmit egress packets for this multicast VLAN as untagged.
1.3.6.1.4.1.890.1.5.13.6.7.6.2.1.5ColumnmvlanRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.13.6.7.6.3TablemvlanTranslateTablenot-accessiblecurrentA table that contains multicast to VLAN translation.
1.3.6.1.4.1.890.1.5.13.6.7.6.3.1RowmvlanTranslateEntrynot-accessiblecurrentAn entry of mvlanTranslateTable.
1.3.6.1.4.1.890.1.5.13.6.7.6.3.1.1ColumnmvlanTranslateIndexread-onlycurrentThe index which specif the entry.
1.3.6.1.4.1.890.1.5.13.6.7.6.3.1.2ColumnmvlanTranslateStartIpread-writecurrentThe start IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.13.6.7.6.3.1.3ColumnmvlanTranslateEndIpread-writecurrentThe end IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.13.6.7.7NodequeryVid
1.3.6.1.4.1.890.1.5.13.6.7.7.1ScalarmaxNumOfQryVidread-onlycurrentThe maximum number of row entries that user can create in qryVidConfTable.
1.3.6.1.4.1.890.1.5.13.6.7.7.2TableqryVidConfTablenot-accessiblecurrentThis table defines statically set VLANs used for response IGMP report.
1.3.6.1.4.1.890.1.5.13.6.7.7.2.1RowqryVidConfEntrynot-accessiblecurrentAn entry in qryVidConfTable.
1.3.6.1.4.1.890.1.5.13.6.7.7.2.1.1ColumnqryVidread-onlycurrentVLAN ID.
1.3.6.1.4.1.890.1.5.13.6.7.7.2.1.2ColumnqryVidRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.13.6.7.7.3TableqryVidStatusTablenot-accessiblecurrentThis table shows statically set or dynamically learned VLANs used for response IGMP report.
1.3.6.1.4.1.890.1.5.13.6.7.7.3.1RowqryVidStatusEntrynot-accessiblecurrentAn entry in qryVidStatusTable.
1.3.6.1.4.1.890.1.5.13.6.7.7.3.1.1ColumnqryVidTyperead-onlycurrentVLAN type.
1.3.6.1.4.1.890.1.5.13.6.7.9ScalarigmpVersionread-writecurrentSetting IGMP version.
1.3.6.1.4.1.890.1.5.13.6.8Nodeport
1.3.6.1.4.1.890.1.5.13.6.8.1TablesubrPortTablenot-accessiblecurrentThis table includes subscriber attributes for the port.
1.3.6.1.4.1.890.1.5.13.6.8.1.1RowsubrPortEntrynot-accessiblecurrentAn entry in subrPortTable.
1.3.6.1.4.1.890.1.5.13.6.8.1.1.1ColumnsubrPortNameread-writecurrentName of the subscriber.
1.3.6.1.4.1.890.1.5.13.6.8.1.1.2ColumnsubrPortTelread-writecurrentTelephone number of the subscriber.
1.3.6.1.4.1.890.1.5.13.6.8.2NodeadslPort
1.3.6.1.4.1.890.1.5.13.6.8.2.1TableadslLineConfTablenot-accessiblecurrentThis table includes common attributes describing the ADSL line.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1RowadslLineConfEntrynot-accessiblecurrentAn entry in adslLineConfTable.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.1ColumnadslLineConfAdslModeread-writecurrentG.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.2ColumnadslLineConfAnnexLread-writecurrentEnable/disable annex L for the port(Only in AnnexA).
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.3ColumnadslLineConfAnnexMread-writecurrentEnable/disable annex M for the port(For BCM AnnexA solution).
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.4ColumnadslLineConfAnnexIread-writecurrentEnable/disable annex I for the port(For BCM AnnexA solution).
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.5ColumnadslLineConfOptionMaskread-writecurrentThe semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : …
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.6ColumnadslLineConfPowerMgmtread-writecurrentEnable/disable power management for the port.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.7ColumnadslLineConfPowerModeread-writecurrentThe power mode of the ADSL line.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.8ColumnadslLineConfAturMaxTxPowerread-writecurrentThe maximum allowed transmit power of ATU-R.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.9ColumnadslLineConfAtucMaxTxPowerread-writecurrentThe maximum allowed transmit power of ATU-C.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.10ColumnadslLineConfMaxRxPowerread-writecurrentThe maximum aggregate received power.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.11ColumnadslLineConfAturCarrierMaskread-writecurrentThe upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31; CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. Bit set…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.12ColumnadslLineConfAtucCarrierMask0read-writecurrentThe downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255; CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255.…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.13ColumnadslLineConfAtucCarrierMask1read-writecurrentThe downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.14ColumnadslLineConfAturInpread-writecurrentThe upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can s…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.15ColumnadslLineConfAtucInpread-writecurrentThe downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.16ColumnadslLineConfL0Timeread-writecurrentSet the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.17ColumnadslLineConfL2Timeread-writecurrentSet minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the rang…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.18ColumnadslLineConfL2ATPRread-writecurrentSet the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADS…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.19ColumnadslLineConfL2ATPRTread-writecurrentthe maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease…
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.20ColumnadslLineConfMaxL2Rateread-writecurrentconfigured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.21ColumnadslLineConfMinL2Rateread-writecurrentconfigured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)
1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.22ColumnadslLineConfL0toL2Rateread-writecurrentconfigured transition L0 to L2 rate. (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)
1.3.6.1.4.1.890.1.5.13.6.8.2.3NodeadslPortBatchSet
1.3.6.1.4.1.890.1.5.13.6.8.2.3.1ScalaradslPortTargetread-writecurrentThe managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chaises) …
1.3.6.1.4.1.890.1.5.13.6.8.2.3.2ScalaradslPortOpsread-writecurrentThe managed object is for ADSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.3ScalaradslPortOps2read-writecurrentThe managed object is for ADSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.4ScalaradslModeForBatchSetread-writecurrentG.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.5ScalaradslLineProfileForBatchSetread-writecurrentThe ADSL line profile.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.6ScalaradslAlarmProfileForBatchSetread-writecurrentThe ADSL alarm profile.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.7ScalaradslOptionMaskForBatchSetread-writecurrentThe semantic for each bit is identical to the object adslLineConfOptionMask.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.8ScalaradslAturMaxTxPowerForBatchSetread-writecurrentThe maximum allowed transmit power of ATU-R.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.9ScalaradslAtucMaxTxPowerForBatchSetread-writecurrentThe maximum allowed transmit power of ATU-C.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.10ScalaradslMaxRxPowerForBatchSetread-writecurrentThe maximum aggregate received power.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.11ScalaradslAturCarrierMaskForBatchSetread-writecurrentThe upstream carrier mask.For CTLM AnnexA solution, bin is from 0 to 31; CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. Bit set …
1.3.6.1.4.1.890.1.5.13.6.8.2.3.12ScalaradslAtucCarrierMask0ForBatchSetread-writecurrentThe downstream carrier mask from bin 32 to 255. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.13ScalaradslAtucCarrierMask1ForBatchSetread-writecurrentThe downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.6.8.2.3.14ScalaradslAturInpForBatchSetread-writecurrentThe upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can s…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.15ScalaradslAtucInpForBatchSetread-writecurrentThe downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.16ScalaradslL0TimeForBatchSetread-writecurrentSet the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.17ScalaradslL2TimeForBatchSetread-writecurrentSet minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the rang…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.18ScalaradslL2ATPRForBatchSetread-writecurrentSet the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADS…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.19ScalaradslL2ATPRTForBatchSetread-writecurrentthe maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease…
1.3.6.1.4.1.890.1.5.13.6.8.2.3.20ScalaradslMaxL2RateForBatchSetread-writecurrentconfigured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)
1.3.6.1.4.1.890.1.5.13.6.8.2.3.21ScalaradslMinL2RateForBatchSetread-writecurrentconfigured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)
1.3.6.1.4.1.890.1.5.13.6.8.2.3.22ScalaradslL0toL2RateForBatchSetread-writecurrentconfigured transition L0 to L2 rate. (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)
1.3.6.1.4.1.890.1.5.13.6.8.2.4TableadslLineStatusTablenot-accessiblecurrentThis table includes the ADSL line status.
1.3.6.1.4.1.890.1.5.13.6.8.2.4.1RowadslLineStatusEntrynot-accessiblecurrentAn entry in adslLineStatusTable.
1.3.6.1.4.1.890.1.5.13.6.8.2.4.1.1ColumnadslLineStatusModeread-onlycurrentThe link up mode of the ADSL line.
1.3.6.1.4.1.890.1.5.13.6.8.2.4.1.2ColumnadslLineUpTimeread-onlycurrentThe link up time of the ADSL line, in unit of seconds
1.3.6.1.4.1.890.1.5.13.6.8.2.5TablepowerMgmtParamTablenot-accessiblecurrentThis table defines L0 to L2 power transition parameters.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1RowpowerMgmtParamEntrynot-accessiblecurrentAn entry in powerMgmtParamTable.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1.1ColumnpowerMgmtL0Timeread-writecurrentThe object specifies the minimum time in L0 mode before L2 mode may be entered.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1.2ColumnpowerMgmtL2Timeread-writecurrentThe object specifies the minimum time in L2 mode before trimming and in between power trims.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1.3ColumnpowerMgmtL2Atprread-writecurrentThe maximum Aggregate Transmit Power Reduction.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1.4ColumnpowerMgmtL2Atprtread-writecurrentThe maximum Aggregate Transmit Power Reduction Total.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1.5ColumnpowerMgmtL2MinRateread-writecurrentThe object specifies the minimum L2 rate.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1.6ColumnpowerMgmtL2MaxRateread-writecurrentThe object specifies the maximum L2 rate.
1.3.6.1.4.1.890.1.5.13.6.8.2.5.1.7ColumnpowerMgmtL2ThreshRateread-writecurrentThe object specifies the rate threshold that triggers the line entering L0 or L2 mode.
1.3.6.1.4.1.890.1.5.13.6.8.2.6TablepowerMgmtPSDTablenot-accessiblecurrentThis table provides the PSD setting for both ATU-C and ATU-R.
1.3.6.1.4.1.890.1.5.13.6.8.2.6.1RowpowerMgmtPSDEntrynot-accessiblecurrentAn entry in powerMgmtPSDTable.
1.3.6.1.4.1.890.1.5.13.6.8.2.6.1.1ColumnpowerMgmtAtucMaxPSDread-writecurrentThe object specifies the maximum ATU-C PSD.
1.3.6.1.4.1.890.1.5.13.6.8.2.6.1.2ColumnpowerMgmtAturMaxPSDread-writecurrentThe object specifies the maximum ATU-R PSD.
1.3.6.1.4.1.890.1.5.13.6.8.4Nodepvc
1.3.6.1.4.1.890.1.5.13.6.8.4.1ScalarmaxNumOfPvcsread-onlycurrentThe maximum number of PVCs which could be created on a port.
1.3.6.1.4.1.890.1.5.13.6.8.4.2TablepvcTablenot-accessiblecurrentThis table includes PVC configuration.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1RowpvcEntrynot-accessiblecurrentAn entry in pvcTable.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.1ColumnpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.2ColumnpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.3ColumnpvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.5ColumnpvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.6ColumnpvcProfileDSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.7ColumnpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.8ColumnpvcProfileUSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
1.3.6.1.4.1.890.1.5.13.6.8.4.2.1.9Columnpvcmaccntread-writecurrentMAC count limit of the pvc.(0 for no limit)
1.3.6.1.4.1.890.1.5.13.6.8.4.4TablepvcUsRateLimitTablenot-accessiblecurrentThis table defines the upstream rate limit for each PVC.
1.3.6.1.4.1.890.1.5.13.6.8.4.4.1RowpvcUsRateLimitEntrynot-accessiblecurrentAn entry in pvcUsRateLimitTable.
1.3.6.1.4.1.890.1.5.13.6.8.4.4.1.1ColumnpvcUsRateLimitEnableread-writecurrentEnable/disable upstream rate limit for a PVC.
1.3.6.1.4.1.890.1.5.13.6.8.4.4.1.2ColumnpvcUsRateLimitread-writecurrentUpstream rate limit in Kbps for a PVC.
1.3.6.1.4.1.890.1.5.13.6.8.5Nodeppvc
1.3.6.1.4.1.890.1.5.13.6.8.5.1ScalarmaxNumOfPriorityPvcsread-onlycurrentThe maximum number of priority PVCs which could be created on a port.
1.3.6.1.4.1.890.1.5.13.6.8.5.2TableppvcTablenot-accessiblecurrentThis table includes priority PVC configuration.
1.3.6.1.4.1.890.1.5.13.6.8.5.2.1RowppvcEntrynot-accessiblecurrentAn entry in ppvcTable.
1.3.6.1.4.1.890.1.5.13.6.8.5.2.1.1ColumnppvcVpiread-onlycurrentVPI of the ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.2.1.2ColumnppvcVciread-onlycurrentVCI of the ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.2.1.3ColumnppvcPvidread-onlycurrentDefault VID of the ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.2.1.4ColumnppvcEncapread-createcurrentEncapsulation of the ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.2.1.5ColumnppvcPriorityread-createcurrent802.1p default priority of the ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.2.1.6ColumnppvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.5.4TableppvcMemberTablenot-accessiblecurrentThis table includes priority PVC member configuration.
1.3.6.1.4.1.890.1.5.13.6.8.5.4.1RowppvcMemberEntrynot-accessiblecurrentAn entry in ppvcMemberTable.
1.3.6.1.4.1.890.1.5.13.6.8.5.4.1.1ColumnppvcMemberVpiread-onlycurrentVPI of the member ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.4.1.2ColumnppvcMemberVciread-onlycurrentVCI of the member ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.4.1.3ColumnppvcMemberPriorityread-onlycurrent802.1p default priority of the member ppvc.
1.3.6.1.4.1.890.1.5.13.6.8.5.4.1.4ColumnppvcMemberProfileDSread-createcurrentThe profile of the member ppvc in DS side.
1.3.6.1.4.1.890.1.5.13.6.8.5.4.1.5ColumnppvcMemberRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.5.4.1.6ColumnppvcMemberProfileUSread-createcurrentThe profile of the member ppvc in US side.
1.3.6.1.4.1.890.1.5.13.6.8.8Noderpvc
1.3.6.1.4.1.890.1.5.13.6.8.8.1TablerpvcGatewayTablenot-accessiblecurrentThis table includes Routed Gateway configuration.
1.3.6.1.4.1.890.1.5.13.6.8.8.1.1RowrpvcGatewayEntrynot-accessiblecurrentAn entry in Routed Gateway table.
1.3.6.1.4.1.890.1.5.13.6.8.8.1.1.1ColumnrpvcGatewayIpread-onlycurrentIP of RPVC gateway.
1.3.6.1.4.1.890.1.5.13.6.8.8.1.1.2ColumnrpvcGatewayVlanIdread-writecurrentVlan id send to this RPVC gateway.
1.3.6.1.4.1.890.1.5.13.6.8.8.1.1.3ColumnrpvcGatewayRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.8.1.1.4ColumnrpvcGatewayPriorityread-writecurrent802.1p p bit send to this RPVC gateway.
1.3.6.1.4.1.890.1.5.13.6.8.8.2TablerpvcTablenot-accessiblecurrentThis table includes RPVC configuration.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1RowrpvcEntrynot-accessiblecurrentAn entry in rpvcTable.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.1ColumnrpvcVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.2ColumnrpvcVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.3ColumnrpvcDSProfileread-createcurrentThe down stream profile of the rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.4ColumnrpvcUSProfileread-createcurrentThe up stream profile of the rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.5ColumnrpvcIpread-onlycurrentThe IP of the rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.6ColumnrpvcNetmaskread-onlycurrentThe IP mask of the rpvc IP.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.7ColumnrpvcGatewayIpAddressread-createcurrentThe gateway IP of rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.2.1.8ColumnrpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.8.3TablerpvcRouteDomainTablenot-accessiblecurrentThis table includes RPVC route domain configuration.
1.3.6.1.4.1.890.1.5.13.6.8.8.3.1RowrpvcRouteDomainEntrynot-accessiblecurrentAn entry in rpvcRouteDomainTable.
1.3.6.1.4.1.890.1.5.13.6.8.8.3.1.1ColumnrpvcRouteDomainVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.3.1.2ColumnrpvcRouteDomainVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.890.1.5.13.6.8.8.3.1.3ColumnrpvcRouteDomainIpread-onlycurrentThe route domain IP.
1.3.6.1.4.1.890.1.5.13.6.8.8.3.1.4ColumnrpvcRouteDomainNetmaskread-onlycurrentThe IP mask of the route domain IP.
1.3.6.1.4.1.890.1.5.13.6.8.8.3.1.5ColumnrpvcRouteDomainRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.8.4ScalarrpvcArpAgingTimeread-writecurrentSet RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg.
1.3.6.1.4.1.890.1.5.13.6.8.8.5ScalarrpvcArpFlushread-writecurrentFlush the RPVC ARP proxy table.
1.3.6.1.4.1.890.1.5.13.6.8.9TabledsBcastDisableTablenot-accessiblecurrentThis table includes Down Stream Bcast configuration.
1.3.6.1.4.1.890.1.5.13.6.8.9.1RowdsBcastDisableEntrynot-accessiblecurrentAn entry in Down Stream Bcast table.
1.3.6.1.4.1.890.1.5.13.6.8.9.1.1ColumndsBcastDisableVlanIdread-onlycurrentdownstream broadcast disabled vid.
1.3.6.1.4.1.890.1.5.13.6.8.9.1.2ColumndsBcastDisableRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.10Nodepaepvc
1.3.6.1.4.1.890.1.5.13.6.8.10.1TablepaepvcTablenot-accessiblecurrentThis table includes PPPoAoE PVC configuration.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1RowpaepvcEntrynot-accessiblecurrentAn entry of paepvcTable.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.1ColumnpaepvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.2ColumnpaepvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.3ColumnpaepvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.5ColumnpaepvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.6ColumnpaepvcProfileDSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.7ColumnpaepvcAcNameread-createcurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.8ColumnpaepvcServiceNameread-createcurrentService name.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.9ColumnpaepvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.10ColumnpaepvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.10.1.1.11ColumnpaepvcProfileUSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
1.3.6.1.4.1.890.1.5.13.6.8.11Nodetlspvc
1.3.6.1.4.1.890.1.5.13.6.8.11.1TabletlspvcTablenot-accessiblecurrentThis table includes Transparent LAN Service (TLS) PVC configuration.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1RowtlspvcEntrynot-accessiblecurrentAn entry of tlspvcTable.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1.1ColumntlspvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1.2ColumntlspvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1.3ColumntlspvcSvidread-onlycurrents-tag VLAN ID of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1.5ColumntlspvcSpriorityread-createcurrents-tag priority of the pvc.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1.6ColumntlspvcProfileDSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1.7ColumntlspvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.6.8.11.1.1.8ColumntlspvcProfileUSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
1.3.6.1.4.1.890.1.5.13.6.8.12Nodeipbpvc
1.3.6.1.4.1.890.1.5.13.6.8.12.1TableipbpvcDomainTablenot-accessiblecurrentThis table includes ipbpvc domain configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.1.1RowipbpvcDomainEntrynot-accessiblecurrentAn entry of ipbpvcDomainTable.
1.3.6.1.4.1.890.1.5.13.6.8.12.1.1.1ColumnipbpvcDomainNameread-onlycurrentName of the domain.
1.3.6.1.4.1.890.1.5.13.6.8.12.1.1.2ColumnipbpvcDomainRowStatusread-createcurrentRow status of the table.
1.3.6.1.4.1.890.1.5.13.6.8.12.2TableipbpvcDomainVlanTablenot-accessiblecurrentThis table includes ipbpvc domain VLAN configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.2.1RowipbpvcDomainVlanEntrynot-accessiblecurrentAn entry of ipbpvcDomainVlanTable.
1.3.6.1.4.1.890.1.5.13.6.8.12.2.1.1ColumnipbpvcDomainVlanIdread-onlycurrentSet VLAN to join or leave the specified domain.
1.3.6.1.4.1.890.1.5.13.6.8.12.2.1.2ColumnipbpvcDomainDhcpVlanEnableread-createcurrentEnable/disable DHCP VLAN in a domain.
1.3.6.1.4.1.890.1.5.13.6.8.12.2.1.3ColumnipbpvcDomainVlanRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.6.8.12.3TableipbpvcEdgeRouterTablenot-accessiblecurrentThis table includes ipbpvc edge router configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.3.1RowipbpvcEdgeRouterEntrynot-accessiblecurrentAn entry of ipbpvcEdgeRouterTable.
1.3.6.1.4.1.890.1.5.13.6.8.12.3.1.1ColumnipbpvcEdgeRouterIpread-onlycurrentIP address of the edge router.
1.3.6.1.4.1.890.1.5.13.6.8.12.3.1.2ColumnipbpvcEdgeRouterVidread-onlycurrentVLAN ID of the edge router.
1.3.6.1.4.1.890.1.5.13.6.8.12.3.1.3ColumnipbpvcEdgeRouterMaskread-onlycurrentNetmask of the edge router.
1.3.6.1.4.1.890.1.5.13.6.8.12.3.1.4ColumnipbpvcEdgeRouterRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.6.8.12.4TableipbpvcInterfaceTablenot-accessiblecurrentThis table includes ipbpvc interface configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1RowipbpvcInterfaceEntrynot-accessiblecurrentAn entry of ipbpvcInterfaceTable.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1.1ColumnipbpvcInterfaceIpread-onlycurrentIP address of the interface.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1.2ColumnipbpvcInterfaceMaskread-onlycurrentNetmask of the interface.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1.3ColumnipbpvcInterfaceVidread-onlycurrentVLAN ID of the interface.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1.4ColumnipbpvcInterfaceIfIndexread-createcurrentIfIndex of the interface.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1.5ColumnipbpvcInterfaceVpiread-createcurrentVPI of the interface.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1.6ColumnipbpvcInterfaceVciread-createcurrentVCI of the interface.
1.3.6.1.4.1.890.1.5.13.6.8.12.4.1.7ColumnipbpvcInterfaceRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.6.8.12.5TableipbpvcRouteTablenot-accessiblecurrentThis table includes ipbpvc route configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.5.1RowipbpvcRouteEntrynot-accessiblecurrentAn entry of ipbpvcRouteTable.
1.3.6.1.4.1.890.1.5.13.6.8.12.5.1.1ColumnipbpvcRouteIpread-onlycurrentIP address of the route.
1.3.6.1.4.1.890.1.5.13.6.8.12.5.1.2ColumnipbpvcRouteMaskread-onlycurrentNetmask of the route.
1.3.6.1.4.1.890.1.5.13.6.8.12.5.1.3ColumnipbpvcRouteNextHopread-onlycurrentNext hop IP address of the route.
1.3.6.1.4.1.890.1.5.13.6.8.12.5.1.4ColumnipbpvcRouteMetricread-createcurrentMetric of the route.
1.3.6.1.4.1.890.1.5.13.6.8.12.5.1.5ColumnipbpvcRoutePriorityread-createcurrentPriority of the route. Note that the default value of this object is 8, which means we keep the original priority of the packet(frame).
1.3.6.1.4.1.890.1.5.13.6.8.12.5.1.6ColumnipbpvcRouteRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.6.8.12.6TableipbpvcTablenot-accessiblecurrentThis table includes ipbpvc configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1RowipbpvcEntrynot-accessiblecurrentAn entry of ipbpvcTable.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.1ColumnipbpvcVpiread-onlycurrentVPI of the PVC.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.2ColumnipbpvcVciread-onlycurrentVCI of the PVC.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.3ColumnipbpvcPvidread-onlycurrentPVID of the PVC.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.4ColumnipbpvcEncapread-createcurrentType of the PVC.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.5ColumnipbpvcPriorityread-createcurrentPriority of the PVC.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.6ColumnipbpvcProfileread-createcurrentProfile of the PVC.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.7ColumnipbpvcRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.6.8.12.6.1.8ColumnipbpvcProfileUSread-createcurrentUS Profile of the PVC.
1.3.6.1.4.1.890.1.5.13.6.8.12.8Nodearpproxy
1.3.6.1.4.1.890.1.5.13.6.8.12.8.1ScalararpproxyAgeread-writecurrentAging time of the ARP proxy. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2NodearpproxyFlush
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2.1ScalararpproxyFlushTargetread-writecurrentThe target whose ARP table to be flushed. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2.2ScalararpproxyFlushOpsread-writecurrentSet the object to 1 to start flushing. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2.3ScalararpproxyFlushEdgeRouterIpread-writecurrentFlush ARP table for the specified edge router. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2.4ScalararpproxyFlushEdgeRouterVidread-writecurrentFlush ARP table for the specified edge router. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2.5ScalararpproxyFlushInterfaceIpread-writecurrentFlush ARP table for the specified interface. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2.6ScalararpproxyFlushInterfaceMaskread-writecurrentFlush ARP table for the specified interface. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.12.8.2.7ScalararpproxyFlushInterfaceVidread-writecurrentFlush ARP table for the specified interface. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.8.51Nodegbond
1.3.6.1.4.1.890.1.5.13.6.8.51.1TablegbondGroupTablenot-accessiblecurrentA table containing the G.Bond configuration information for each bonding group of the device.
1.3.6.1.4.1.890.1.5.13.6.8.51.1.1RowgbondGroupEntrynot-accessiblecurrentAn entry of gbondTable.
1.3.6.1.4.1.890.1.5.13.6.8.51.1.1.1ColumngbondGroupNameread-onlycurrentAn administratively assigned string, which may be used to identify bonding group.
1.3.6.1.4.1.890.1.5.13.6.8.51.1.1.2ColumngbondGroupPortsread-createcurrentThe set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved…
1.3.6.1.4.1.890.1.5.13.6.8.51.1.1.4ColumngbondGroupUpRateread-onlycurrentThe UP stream rate.
1.3.6.1.4.1.890.1.5.13.6.8.51.1.1.5ColumngbondGroupDownRateread-onlycurrentThe DOWN stream rate.
1.3.6.1.4.1.890.1.5.13.6.8.51.1.1.6ColumngbondGroupRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.13.6.10Nodeswitch
1.3.6.1.4.1.890.1.5.13.6.10.5Nodedot1x
1.3.6.1.4.1.890.1.5.13.6.10.5.1ScalarmaxNumberOfRadiusServersread-onlycurrentThe max number of the RADIUS Servers.
1.3.6.1.4.1.890.1.5.13.6.10.5.2TableradiusServerTablenot-accessiblecurrentA table that contains Radius Server information.
1.3.6.1.4.1.890.1.5.13.6.10.5.2.1RowradiusServerEntrynot-accessiblecurrentThe entry of Radius Server table.
1.3.6.1.4.1.890.1.5.13.6.10.5.2.1.1ColumnradiusServerIndexread-onlycurrentThe identity of the RADIUS server.
1.3.6.1.4.1.890.1.5.13.6.10.5.2.1.2ColumnradiusServerIpread-createcurrentThe IP address of the Radius Server.
1.3.6.1.4.1.890.1.5.13.6.10.5.2.1.3ColumnradiusServerPortread-createcurrentThe UDP port of the Radius Server.
1.3.6.1.4.1.890.1.5.13.6.10.5.2.1.4ColumnradiusSharedSecretread-createcurrentThe shared secret of the Radius Server.
1.3.6.1.4.1.890.1.5.13.6.10.5.2.1.5ColumnradiusServerRowStatusread-createcurrentThe row status of the Radius Server entry.
1.3.6.1.4.1.890.1.5.13.6.10.5.3Scalardot1xEnableread-writecurrentEnable/disable the 802.1x function.
1.3.6.1.4.1.890.1.5.13.6.10.5.4Tabledot1xPortTablenot-accessiblecurrentThis table includes the configuration of 802.1x.
1.3.6.1.4.1.890.1.5.13.6.10.5.4.1Rowdot1xPortEntrynot-accessiblecurrentAn entry in dot1xPortTable.
1.3.6.1.4.1.890.1.5.13.6.10.5.4.1.1Columndot1xPortEnableread-writecurrentThe option defines if the port enables 802.1x settings.
1.3.6.1.4.1.890.1.5.13.6.10.5.4.1.2Columndot1xPortControlread-writecurrentThe configuration defines the 802.1x port control type.
1.3.6.1.4.1.890.1.5.13.6.10.5.4.1.3Columndot1xPortReAuthEnableread-writecurrentThe option defines if the port enables 802.1x re-authentication.
1.3.6.1.4.1.890.1.5.13.6.10.5.4.1.4Columndot1xPortReAuthPeriodread-writecurrentThe configuration defines the 802.1x re-authentication period (seconds) for each port.
1.3.6.1.4.1.890.1.5.13.6.10.5.5ScalarradiusModeread-writecurrentSet RADIUS mode as let IP DSLAM uses an external RADIUS server to authenticate users or let IP DSLAM uses its internal database of user names and passwords to …
1.3.6.1.4.1.890.1.5.13.6.10.5.6ScalarmaxNumberOfRadiusUserProfilesread-onlycurrentThe max number of the RADIUS user profiles.
1.3.6.1.4.1.890.1.5.13.6.10.5.7TableradiusUserProfileTablenot-accessiblecurrentA table includes the configuration of RADIUS user profile.
1.3.6.1.4.1.890.1.5.13.6.10.5.7.1RowradiusUserProfileEntrynot-accessiblecurrentAn entry of radiusUserProfileTable.
1.3.6.1.4.1.890.1.5.13.6.10.5.7.1.1ColumnradiusUserProfileUserNameread-onlycurrentThe user name.
1.3.6.1.4.1.890.1.5.13.6.10.5.7.1.2ColumnradiusUserProfileUserPasswordread-createcurrentThe user password.
1.3.6.1.4.1.890.1.5.13.6.10.5.7.1.3ColumnradiusUserProfileRowStatusread-createcurrentThe row status used to create or delete an user.
1.3.6.1.4.1.890.1.5.13.6.10.10Nodedscp
1.3.6.1.4.1.890.1.5.13.6.10.10.1TabledscpMappingTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl and ethernet ports.
1.3.6.1.4.1.890.1.5.13.6.10.10.1.1RowdscpMappingEntrynot-accessiblecurrentAn entry of dscpMappingTable.
1.3.6.1.4.1.890.1.5.13.6.10.10.1.1.1ColumndscpSrcCodePointread-onlycurrentThe DSCP source code point used for mapping.
1.3.6.1.4.1.890.1.5.13.6.10.10.1.1.3ColumndscpMapPriorityread-writecurrentThe mapping p bits that will replace the source p bits in the incoming packet.
1.3.6.1.4.1.890.1.5.13.6.10.10.2TabledscpPortTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl and ethernet ports.
1.3.6.1.4.1.890.1.5.13.6.10.10.2.1RowdscpPortEntrynot-accessiblecurrentAn entry of dscpPortTable.
1.3.6.1.4.1.890.1.5.13.6.10.10.2.1.1ColumndscpStatusEnableread-writecurrentThe DSCP port status.
1.3.6.1.4.1.890.1.5.13.6.10.12NodevlanIsolation
1.3.6.1.4.1.890.1.5.13.6.10.12.1TablevlanIsolationTablenot-accessiblecurrentA table contains configuration of isolated VLAN.
1.3.6.1.4.1.890.1.5.13.6.10.12.1.1RowvlanIsolationEntrynot-accessiblecurrentAn entry of vlanIsolationTable.
1.3.6.1.4.1.890.1.5.13.6.10.12.1.1.1ColumnvlanIsolationRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.6.10.13NodeenetMtu
1.3.6.1.4.1.890.1.5.13.6.10.13.1ScalarenetMaxMturead-writecurrentSets the maximum MTU size for layer 2 frame, size from 1526 to 1600, default value is 1526.
1.3.6.1.4.1.890.1.5.13.6.10.51Nodedhcp
1.3.6.1.4.1.890.1.5.13.6.10.51.1ScalardhcpRelayEnableread-writecurrentEnable/disable DHCP relay Option82 function.
1.3.6.1.4.1.890.1.5.13.6.10.51.2TabledhcpRelay82Tablenot-accessiblecurrentA table that contains DHCP Relay configuration.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1RowdhcpRelay82Entrynot-accessiblecurrentThe entry of DHCP Relay table.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.1ColumndhcpRelay82PrimaryServerread-writecurrentThe IP address of the DHCP Relay primary server.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.2ColumndhcpRelay82SecondaryServerread-writecurrentThe IP address of the DHCP Relay secondary server.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.3ColumndhcpRelay82ActiveServerread-writecurrentThe current active DHCP Relay server.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.4ColumndhcpRelay82Enableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.5ColumndhcpRelay82Inforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.6ColumndhcpRelay82RelayModeread-createcurrentDHCP relay mode.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.8ColumndhcpRelay82Suboption2Enableread-createcurrentEnable/disable Option 82 sub-option 2.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.9ColumndhcpRelay82Suboption2Inforead-createcurrentUser specified information for Option 82 sub-option 2.
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.10ColumndhcpRelay82EntryEnableread-createcurrentEnable/disable DHCP Relay
1.3.6.1.4.1.890.1.5.13.6.10.51.2.1.11ColumndhcpRelay82EntryOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.890.1.5.13.6.10.51.3ScalardhcpRelayOption82Sub1Inforead-writecurrentUser specific Option82 subOption1 (Agent circuit ID) information.
1.3.6.1.4.1.890.1.5.13.6.10.51.4ScalarmaxNumOfDhcpRelay82Confread-onlycurrentThe maximum number of rows that can be created in dhcpRelay82Table.
1.3.6.1.4.1.890.1.5.13.6.10.51.5ScalardhcpRelayOption82Sub1Enableread-writecurrentEnable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function.
1.3.6.1.4.1.890.1.5.13.6.10.51.6ScalardhcpRelayOption82Sub2Inforead-writecurrentUser specific Option82 subOption2 (Agent Remote ID) information.
1.3.6.1.4.1.890.1.5.13.6.10.51.7ScalardhcpRelayOption82Sub2Enableread-writecurrentEnable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function.
1.3.6.1.4.1.890.1.5.13.6.10.53Nodemacfilter
1.3.6.1.4.1.890.1.5.13.6.10.53.1TablemacFilterPortTablenot-accessiblecurrentThis table includes the status of mac filtering for each port.
1.3.6.1.4.1.890.1.5.13.6.10.53.1.1RowmacFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.890.1.5.13.6.10.53.1.1.1ColumnmacFilterPortEnableread-writecurrentEnable/disable MAC filtering for the port.
1.3.6.1.4.1.890.1.5.13.6.10.53.1.1.2ColumnmacFilterPortMacCountread-writecurrentThe total number of MAC addresses allowed for the port.
1.3.6.1.4.1.890.1.5.13.6.10.53.1.1.3ColumnmacFilterPortFilterModeread-writecurrentThe mac filter mode (accept or deny) for the port.
1.3.6.1.4.1.890.1.5.13.6.10.53.2ScalarmaxNumOfMacFiltersInSystemread-onlycurrentThe max number of mac filters supported in the system.
1.3.6.1.4.1.890.1.5.13.6.10.53.3ScalarmaxNumOfMacFiltersPerPortread-onlycurrentThe max number of mac filters supported per port.
1.3.6.1.4.1.890.1.5.13.6.10.53.4ScalarcurrNumOfMacFiltersInSystemread-onlycurrentThe current number of mac filters in the system.
1.3.6.1.4.1.890.1.5.13.6.10.53.5TablemacFilterTablenot-accessiblecurrentA table that contains the mac filter addresses.
1.3.6.1.4.1.890.1.5.13.6.10.53.5.1RowmacFilterEntrynot-accessiblecurrentThe entry of macFilterTable.
1.3.6.1.4.1.890.1.5.13.6.10.53.5.1.1ColumnmacFilterAddrread-onlycurrentThe mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.13.6.10.53.5.1.2ColumnmacFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.6.10.53.6NodemacfilterBatchSet
1.3.6.1.4.1.890.1.5.13.6.10.53.6.1ScalarmacfilterTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis)…
1.3.6.1.4.1.890.1.5.13.6.10.53.6.2ScalarmacfilterOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable…
1.3.6.1.4.1.890.1.5.13.6.10.53.6.3ScalarmacFilterMacCountForBatchSetread-writecurrentThe total number of MAC addresses allowed for a port.
1.3.6.1.4.1.890.1.5.13.6.10.53.7TableouiFilterTablenot-accessiblecurrentA table that contains the OUI filter addresses.
1.3.6.1.4.1.890.1.5.13.6.10.53.7.1RowouiFilterEntrynot-accessiblecurrentThe entry of ouiFilterTable.
1.3.6.1.4.1.890.1.5.13.6.10.53.7.1.1ColumnouiFilterAddrread-onlycurrentThe first three bytes of the mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.13.6.10.53.7.1.2ColumnouiFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.6.10.53.8ScalarmaxNumOfOuiFiltersPerPortread-onlycurrentThe max number of OUI filters supported per port.
1.3.6.1.4.1.890.1.5.13.6.10.53.9TableouiFilterPortTablenot-accessiblecurrentThis table includes the status of oui filtering for each port.
1.3.6.1.4.1.890.1.5.13.6.10.53.9.1RowouiFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.890.1.5.13.6.10.53.9.1.1ColumnouiFilterPortEnableread-writecurrentEnable/disable oui filtering for the port.
1.3.6.1.4.1.890.1.5.13.6.10.53.9.1.2ColumnouiFilterPortFilterModeread-writecurrentThe oui filter mode (accept or deny) for the port.
1.3.6.1.4.1.890.1.5.13.6.10.55NodedhcpSnoop
1.3.6.1.4.1.890.1.5.13.6.10.55.1TabledhcpSnoopPortTablenot-accessiblecurrentThis table includes DHCP snooping enable/disable for each port.
1.3.6.1.4.1.890.1.5.13.6.10.55.1.1RowdhcpSnoopPortEntrynot-accessiblecurrentAn entry of dhcpSnoopPortTable.
1.3.6.1.4.1.890.1.5.13.6.10.55.1.1.1ColumndhcpSnoopEnableread-writecurrentEnable/disable DHCP snooping for a port.
1.3.6.1.4.1.890.1.5.13.6.10.55.2ScalardhcpSnoopTargetread-writecurrentThis managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of …
1.3.6.1.4.1.890.1.5.13.6.10.55.3ScalardhcpSnoopOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
1.3.6.1.4.1.890.1.5.13.6.10.55.4TabledhcpStaticTablenot-accessiblecurrentThis table defines DHCP static IP addresses.
1.3.6.1.4.1.890.1.5.13.6.10.55.4.1RowdhcpStaticEntrynot-accessiblecurrentAn entry of dhcpStaticTable.
1.3.6.1.4.1.890.1.5.13.6.10.55.4.1.1ColumndhcpStaticIpAddrread-onlycurrentThe IP address which can pass through the port.
1.3.6.1.4.1.890.1.5.13.6.10.55.4.1.2ColumndhcpStaticRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.6.10.55.5ScalarmaxNumOfDhcpStaticIpread-onlycurrentThe maximum number of DHCP static IP addresses which can be created for a port.
1.3.6.1.4.1.890.1.5.13.6.10.55.6ScalardhcpSnoopLan2lanEnableread-writecurrentEnable/disable DHCP server on subscriber port
1.3.6.1.4.1.890.1.5.13.6.10.56Nodeacl
1.3.6.1.4.1.890.1.5.13.6.10.56.1TableaclSetTablenot-accessiblecurrentaclsetTable.
1.3.6.1.4.1.890.1.5.13.6.10.56.1.1RowaclSetEntrynot-accessiblecurrentAn entry of aclSetTable.
1.3.6.1.4.1.890.1.5.13.6.10.56.1.1.1ColumnaclSetVpiread-onlycurrentVPI value
1.3.6.1.4.1.890.1.5.13.6.10.56.1.1.2ColumnaclSetVciread-onlycurrentVCI value
1.3.6.1.4.1.890.1.5.13.6.10.56.1.1.3ColumnaclSetProfileNameread-onlycurrentACL Profile name
1.3.6.1.4.1.890.1.5.13.6.10.56.1.1.4ColumnaclSetRowStatusread-writecurrentRowStatus of aclSetEntry
1.3.6.1.4.1.890.1.5.13.6.10.56.2TableaclProfileTablenot-accessiblecurrentaclProfileTable.
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1RowaclProfileEntrynot-accessiblecurrentAn entry of aclProfileTable.
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.1ColumnaclProfileRuleNameread-onlycurrentProfile rule name
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.2ColumnaclProfileRuleNumberread-writecurrentThe managed object is for acl profile rule configuration. etype <etype> vlan <vid> (1), etype <etype> smac <mac> (2), etype <etype> dmac <mac> (3), vlan <vid> …
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.3ColumnaclProfileActionNumberread-writecurrentProfile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.4ColumnaclProfileRuleParamMaskread-writecurrentProfile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <…
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.5ColumnaclProfileRuleEtyperead-writecurrentProfile rule etype
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.6ColumnaclProfileRuleVidread-writecurrentProfile rule vid
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.7ColumnaclProfileRuleSmacread-writecurrentProfile rule source MAC
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.8ColumnaclProfileRuleDmacread-writecurrentProfile rule destination MAC
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.9ColumnaclProfileRulePriorityread-writecurrentProfile rule priority
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.10ColumnaclProfileRuleProtocolread-writecurrentProfile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.11ColumnaclProfileRuleSrcIPread-writecurrentProfile rule source IP
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.12ColumnaclProfileRuleSrcIPMaskread-writecurrentThe subnet mask of source IP mask
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.13ColumnaclProfileRuleDestIPread-writecurrentProfile rule source IP
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.14ColumnaclProfileRuleDestIPMaskread-writecurrentThe subnet mask of dest IP mask
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.15ColumnaclProfileRuleStartTosread-writecurrentProfile rule start type of service
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.16ColumnaclProfileRuleEndTosread-writecurrentProfile rule end type of service
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.17ColumnaclProfileRuleSrcStartPortread-writecurrentProfile rule source start port
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.18ColumnaclProfileRuleSrcEndPortread-writecurrentProfile rule source end port
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.19ColumnaclProfileRuleDestStartPortread-writecurrentProfile rule destination start port
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.20ColumnaclProfileRuleDestEndPortread-writecurrentProfile rule destination end port
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.21ColumnaclProfileActionRateread-writecurrentProfile action to replace to this rate
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.22ColumnaclProfileActionrvlanread-writecurrentProfile action to replace to this vlan
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.23ColumnaclProfileActionrpriread-writecurrentProfile action to replace to this priority
1.3.6.1.4.1.890.1.5.13.6.10.56.2.1.24ColumnaclProfileRowStatusread-writecurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.6.10.57NodepppoeAgent
1.3.6.1.4.1.890.1.5.13.6.10.57.1TablepppoeAgentTablenot-accessiblecurrentA table that contains PPPoE DHCP Relay configuration.
1.3.6.1.4.1.890.1.5.13.6.10.57.1.1RowpppoeAgentEntrynot-accessiblecurrentAn entry of pppoeAgentTable.
1.3.6.1.4.1.890.1.5.13.6.10.57.1.1.1ColumnpppoeAgentEnableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.890.1.5.13.6.10.57.1.1.2ColumnpppoeAgentInforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.890.1.5.13.6.10.57.1.1.3ColumnpppoeAgentRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.6.10.57.1.1.4ColumnpppoeAgentOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.890.1.5.13.6.10.57.2ScalarmaxNumOfPppoeAgentConfread-onlycurrentThe maximum number of rows that can be created in pppoeAgentTable.
1.3.6.1.4.1.890.1.5.13.6.10.58Nodefdb
1.3.6.1.4.1.890.1.5.13.6.10.58.1ScalarfdbAntiSpoofingread-writecurrentFDB Anti Spoofing.
1.3.6.1.4.1.890.1.5.13.6.10.58.2ScalarfdbPolicyread-writecurrentFDB Policy.
1.3.6.1.4.1.890.1.5.13.6.10.60Nodeloopguard
1.3.6.1.4.1.890.1.5.13.6.10.60.1TableloopguardPortTablenot-accessiblecurrentLoop guard configuration table
1.3.6.1.4.1.890.1.5.13.6.10.60.1.1RowloopguardPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.6.10.60.1.1.1ColumnloopguardPortEnableread-writecurrentEnable/Disable loop guard function for specific port.
1.3.6.1.4.1.890.1.5.13.6.10.60.1.1.2ColumnloopguardPortModeread-writecurrentConfigures the mode when loop condition is detected. fix : shutdown the port, user needs to enable the port manually dynamic : shutdown the port, and recovered…
1.3.6.1.4.1.890.1.5.13.6.10.60.1.1.3ColumnloopguardPortRecoverTimeread-writecurrentConfigures the recover time for dynamic mode.
1.3.6.1.4.1.890.1.5.13.6.11Nodesys
1.3.6.1.4.1.890.1.5.13.6.11.4NodetimeSetup
1.3.6.1.4.1.890.1.5.13.6.11.4.7NodedayLightSaving
1.3.6.1.4.1.890.1.5.13.6.11.4.7.1ScalardayLightSavingAdminStatusread-writecurrent
1.3.6.1.4.1.890.1.5.13.6.11.4.7.2NodedayLightSavingStartTime
1.3.6.1.4.1.890.1.5.13.6.11.4.7.2.1ScalardayLightSavingStartMonthread-writecurrent
1.3.6.1.4.1.890.1.5.13.6.11.4.7.2.2ScalardayLightSavingStartWeekread-writecurrent
1.3.6.1.4.1.890.1.5.13.6.11.4.7.2.3ScalardayLightSavingStartWdayread-writecurrent
1.3.6.1.4.1.890.1.5.13.6.11.4.7.2.4ScalardayLightSavingStartHourread-writecurrent0: 00:00, 1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:…
1.3.6.1.4.1.890.1.5.13.6.11.4.7.3NodedayLightSavingEndTime
1.3.6.1.4.1.890.1.5.13.6.11.4.7.3.1ScalardayLightSavingEndMonthread-writecurrent
1.3.6.1.4.1.890.1.5.13.6.11.4.7.3.2ScalardayLightSavingEndWeekread-writecurrent
1.3.6.1.4.1.890.1.5.13.6.11.4.7.3.3ScalardayLightSavingEndWdayread-writecurrent
1.3.6.1.4.1.890.1.5.13.6.11.4.7.3.4ScalardayLightSavingEndHourread-writecurrent0: 00:00, 1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:…
1.3.6.1.4.1.890.1.5.13.6.11.5NodeaccessCtrl
1.3.6.1.4.1.890.1.5.13.6.11.5.2TablesecuredClientTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.890.1.5.13.6.11.5.2.1RowsecuredClientEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.890.1.5.13.6.11.5.2.1.1ColumnsecuredClientIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.13.6.11.5.2.1.2ColumnsecuredClientStartIpread-writecurrentThe starting IP address of the secured client set.
1.3.6.1.4.1.890.1.5.13.6.11.5.2.1.3ColumnsecuredClientEndIpread-writecurrentThe ending IP address of the secured client set.
1.3.6.1.4.1.890.1.5.13.6.11.5.2.1.4ColumnsecuredClientServiceread-writecurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.890.1.5.13.6.11.5.2.1.5ColumnsecuredClientEnableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.890.1.5.13.6.11.8NodeextAlarm
1.3.6.1.4.1.890.1.5.13.6.11.8.1TableextAlarmTablenot-accessiblecurrentA table that contains external alarm information.
1.3.6.1.4.1.890.1.5.13.6.11.8.1.1RowextAlarmEntrynot-accessiblecurrentThe entry of external alarm table.
1.3.6.1.4.1.890.1.5.13.6.11.8.1.1.1ColumnextAlarmIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.13.6.11.8.1.1.2ColumnextAlarmnameread-writecurrentThe external alarm name.
1.3.6.1.4.1.890.1.5.13.6.11.8.1.1.3ColumnextAlarmstatusread-onlycurrentDispaly 'Normal' or 'Alarm' string
1.3.6.1.4.1.890.1.5.13.6.11.9Nodeuser
1.3.6.1.4.1.890.1.5.13.6.11.9.1ScalaruserAuthModeread-writecurrentUser authentication procsssing mode.
1.3.6.1.4.1.890.1.5.13.6.11.9.2ScalaruserAuthServerIpread-writecurrentThe IP address of the authentication server.
1.3.6.1.4.1.890.1.5.13.6.11.9.3ScalaruserAuthServerPortread-writecurrentThe port of the authentication server.
1.3.6.1.4.1.890.1.5.13.6.11.9.4ScalaruserAuthServerSecretread-writecurrentThe secret between the authentication server and the NE for authentication process.
1.3.6.1.4.1.890.1.5.13.6.11.9.5TableuserTablenot-accessiblecurrentA table that contains user information.
1.3.6.1.4.1.890.1.5.13.6.11.9.5.1RowuserEntrynot-accessiblecurrentAn entry of userTable.
1.3.6.1.4.1.890.1.5.13.6.11.9.5.1.1ColumnuserNameread-onlycurrentThe user name.
1.3.6.1.4.1.890.1.5.13.6.11.9.5.1.2ColumnuserPasswordread-createcurrentThe user password.
1.3.6.1.4.1.890.1.5.13.6.11.9.5.1.3ColumnuserPriviledgeread-createcurrentThe user priviledge to decide what operation the user can and cannot do.
1.3.6.1.4.1.890.1.5.13.6.11.9.5.1.4ColumnuserRowStatusread-createcurrentThe row status used to create or delete a user.
1.3.6.1.4.1.890.1.5.13.6.11.9.6ScalaruserAuthDefaultPriviledgeread-writecurrentThe user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
1.3.6.1.4.1.890.1.5.13.6.11.10ScalarsysSlotIdread-writecurrentDevice slot ID(0...65535).
1.3.6.1.4.1.890.1.5.13.6.12Nodetrap
1.3.6.1.4.1.890.1.5.13.6.12.1Nodeobject
1.3.6.1.4.1.890.1.5.13.6.12.1.2ScalareqptAlarmInputIndexread-onlycurrentThe index of alarm input.
1.3.6.1.4.1.890.1.5.13.6.12.1.8ScalareqptAlarmInputNameread-onlycurrentThe Name of alarm input.
1.3.6.1.4.1.890.1.5.13.6.12.1.9ScalarsysMacAntiSpoofOrigread-onlycurrentThe Original port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.6.12.1.10ScalarsysMacAntiSpoofNewread-onlycurrentThe New port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.6.12.1.11ScalarsysMacAntiSpoofMACread-onlycurrentThe MAC of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.6.12.1.12ScalarsysUserread-onlycurrentLogin user name.
1.3.6.1.4.1.890.1.5.13.6.12.1.13ScalarsysAccessPointread-onlycurrentThe access point to DSLAM.
1.3.6.1.4.1.890.1.5.13.6.12.1.14ScalarlgReceiverIfIndexnot-accessiblecurrentA unique value, greater than zero, for each interface. The index of receiver interface which receives detected loop guard probe packet.
1.3.6.1.4.1.890.1.5.13.6.12.1.15ScalarlgSenderIfIndexnot-accessiblecurrentA unique value, greater than zero, for each interface. The index of sender interface which sends detected loop guard probe packet.
1.3.6.1.4.1.890.1.5.13.6.12.3Nodeequipment
1.3.6.1.4.1.890.1.5.13.6.12.3.1NotificationeqptHWMonitorFailurecurrentHardware monitor diagnosis is failed.
1.3.6.1.4.1.890.1.5.13.6.12.4Nodesystrap
1.3.6.1.4.1.890.1.5.13.6.12.4.1NotificationsysMacAntiSpoofingcurrentMAC Anti-spoofing.
1.3.6.1.4.1.890.1.5.13.6.12.4.2NotificationsysAlarmCutoffEnablecurrentAlarm cutoff is activated.
1.3.6.1.4.1.890.1.5.13.6.12.4.3NotificationsysAlarmClearEnablecurrentAlarm clear is activated.
1.3.6.1.4.1.890.1.5.13.6.12.4.4NotificationsysLoginFailurecurrentUser login is failed.
1.3.6.1.4.1.890.1.5.13.6.12.4.5NotificationsysLoginOkcurrentUser login is ok.
1.3.6.1.4.1.890.1.5.13.6.12.5Nodedsltrap
1.3.6.1.4.1.890.1.5.13.6.12.5.1NotificationdslLoopguardcurrentThe trap signifies loop is detected by ifIndex (dsl port).
1.3.6.1.4.1.890.1.5.13.6.12.5.2NotificationdslLoopguardClearcurrentThe trap signifies loop in ifIndex (dsl port) is cleared.
1.3.6.1.4.1.890.1.5.13.6.12.6Nodeenettrap
1.3.6.1.4.1.890.1.5.13.6.12.6.1NotificationenetLoopguardcurrentThe trap signifies loop is detected by ifIndex (enet port).
1.3.6.1.4.1.890.1.5.13.6.12.6.2NotificationenetLoopguardClearcurrentThe trap signifies loop in ifIndex (enet port) is cleared.
1.3.6.1.4.1.890.1.5.13.6.13Nodestatistics
1.3.6.1.4.1.890.1.5.13.6.13.1ScalarigmpQueryCntTotalread-onlycurrentThe total number of IGMP query messages received.
1.3.6.1.4.1.890.1.5.13.6.13.2ScalarigmpReportCntTotalread-onlycurrentThe total number of IGMP report messages received.
1.3.6.1.4.1.890.1.5.13.6.13.3ScalarigmpLeaveCntTotalread-onlycurrentThe total number of IGMP leave messages received.
1.3.6.1.4.1.890.1.5.13.6.13.4ScalarigmpNumOfActiveGroupsread-onlycurrentThe total number of IGMP learned groups.
1.3.6.1.4.1.890.1.5.13.6.13.5TableigmpGroupTablenot-accessiblecurrentThis table includes igmp group information.
1.3.6.1.4.1.890.1.5.13.6.13.5.1RowigmpGroupEntrynot-accessiblecurrentAn entry in igmpGroupTable.
1.3.6.1.4.1.890.1.5.13.6.13.5.1.1ColumnigmpGroupIpread-onlycurrentigmp group IP
1.3.6.1.4.1.890.1.5.13.6.13.5.1.2ColumnigmpGroupvidread-onlycurrentvlan id
1.3.6.1.4.1.890.1.5.13.6.13.5.1.3ColumnigmpGroupnumberOfMembersread-onlycurrentnumber Of Members
1.3.6.1.4.1.890.1.5.13.6.13.5.1.4ColumnigmpGroupMemberPortsread-onlycurrentGroup Member Ports
1.3.6.1.4.1.890.1.5.13.6.13.6TableigmpGroupPortTablenot-accessiblecurrentThis table includes igmp Group port information.
1.3.6.1.4.1.890.1.5.13.6.13.6.1RowigmpGroupPortEntrynot-accessiblecurrentAn entry in igmpGroupPortTable.
1.3.6.1.4.1.890.1.5.13.6.13.6.1.1ColumnigmpGroupPortIpread-onlycurrentIgmp Group IP
1.3.6.1.4.1.890.1.5.13.6.13.6.1.2ColumnigmpGroupPortvidread-onlycurrentIgmp Group vid
1.3.6.1.4.1.890.1.5.13.6.13.7TableigmpGroupV2Tablenot-accessiblecurrentA table that displays IGMP learned group member information.
1.3.6.1.4.1.890.1.5.13.6.13.7.1RowigmpGroupV2Entrynot-accessiblecurrentAn entry of igmpGroupV2Table.
1.3.6.1.4.1.890.1.5.13.6.13.7.1.1ColumnigmpGroupV2Vidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.13.6.13.7.1.2ColumnigmpGroupV2Ipread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.13.6.13.7.1.3ColumnigmpGroupV2NumOfMembersread-onlycurrentThe number of member ports in the group.
1.3.6.1.4.1.890.1.5.13.6.13.7.1.4ColumnigmpGroupV2MemberPortsread-onlycurrentThe member port list of the group.
1.3.6.1.4.1.890.1.5.13.6.13.8TableigmpGroupPortV2Tablenot-accessiblecurrentA table that displays IGMP joined groups in this port.
1.3.6.1.4.1.890.1.5.13.6.13.8.1RowigmpGroupPortV2Entrynot-accessiblecurrentAn entry of igmpGroupPortV2Table.
1.3.6.1.4.1.890.1.5.13.6.13.8.1.1ColumnigmpGroupPortV2Vidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.13.6.13.8.1.2ColumnigmpGroupPortV2Ipread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.13.6.13.8.1.3ColumnigmpGroupPortV2SourceIpread-onlycurrentThe source IP address that joins the IGMP group.
1.3.6.1.4.1.890.1.5.13.6.13.9TableigmpPortCtrlPduTablenot-accessiblecurrentA table that displays IGMP related counter values in this port.
1.3.6.1.4.1.890.1.5.13.6.13.9.1RowigmpPortCtrlPduEntrynot-accessiblecurrentAn entry of igmpPortCtrlPduTable.
1.3.6.1.4.1.890.1.5.13.6.13.9.1.1ColumnigmpPortCtrlPduQueryCntread-onlycurrentThe total number of IGMP query messages received in this port.
1.3.6.1.4.1.890.1.5.13.6.13.9.1.2ColumnigmpPortCtrlPduReportCntread-onlycurrentThe total number of IGMP report messages received in this port.
1.3.6.1.4.1.890.1.5.13.6.13.9.1.3ColumnigmpPortCtrlPduLeaveCntread-onlycurrentThe total number of IGMP leave messages received in this port.
1.3.6.1.4.1.890.1.5.13.6.13.9.1.4ColumnigmpPortNumOfActiveGroupsread-onlycurrentThe total number of active IGMP groups in this port.
1.3.6.1.4.1.890.1.5.13.6.13.11NodedhcpStats
1.3.6.1.4.1.890.1.5.13.6.13.11.1TabledhcpSnoopIpTablenot-accessiblecurrentThis table shows the IP addresses and netmasks offered by the DHCP server.
1.3.6.1.4.1.890.1.5.13.6.13.11.1.1RowdhcpSnoopIpEntrynot-accessiblecurrentAn entry of dhcpSnoopIpTable.
1.3.6.1.4.1.890.1.5.13.6.13.11.1.1.1ColumndhcpSnoopIpread-onlycurrentThe snooped IP address.
1.3.6.1.4.1.890.1.5.13.6.13.11.1.1.2ColumndhcpSnoopMacread-onlycurrentThe snooped MAC address.
1.3.6.1.4.1.890.1.5.13.6.13.11.1.1.3ColumndhcpSnoopVidread-onlycurrentThe snooped VLAN ID.
1.3.6.1.4.1.890.1.5.13.6.13.11.2TabledhcpSnoopCounterTablenot-accessiblecurrentThis table shows the DHCP statistics.
1.3.6.1.4.1.890.1.5.13.6.13.11.2.1RowdhcpSnoopCounterEntrynot-accessiblecurrentAn entry of dhcpSnoopCounterTable.
1.3.6.1.4.1.890.1.5.13.6.13.11.2.1.1ColumndhcpDiscoveryread-onlycurrentThe total number of received DHCP server discovery packets.
1.3.6.1.4.1.890.1.5.13.6.13.11.2.1.2ColumndhcpOfferread-onlycurrentThe total number of received DHCP server offer packets.
1.3.6.1.4.1.890.1.5.13.6.13.11.2.1.3ColumndhcpRequestread-onlycurrentThe total number of received DHCP IP request packets.
1.3.6.1.4.1.890.1.5.13.6.13.11.2.1.4ColumndhcpAckread-onlycurrentThe total number of received DHCP IP acknowledge packets.
1.3.6.1.4.1.890.1.5.13.6.13.11.2.1.5ColumndhcpAckBySnoopFullread-onlycurrentThe total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.
1.3.6.1.4.1.890.1.5.13.6.13.12NodepaepvcStats
1.3.6.1.4.1.890.1.5.13.6.13.12.1TablepaepvcSessionTablenot-accessiblecurrentThis table shows the paepvc session statistics.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1RowpaepvcSessionEntrynot-accessiblecurrentAn entry of paepvcSessionTable.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1.1ColumnpaepvcSessionVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1.2ColumnpaepvcSessionVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1.3ColumnpaepvcSessionStateread-onlycurrentThe PAEPVC status.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1.4ColumnpaepvcSessionIdread-onlycurrentThe PAEPVC session ID.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1.5ColumnpaepvcSessionUptimeread-onlycurrentThe PAEPVC session uptime.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1.6ColumnpaepvcSessionacnameread-onlycurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.13.6.13.12.1.1.7ColumnpaepvcSessionsrvcnameread-onlycurrentService name.
1.3.6.1.4.1.890.1.5.13.6.13.12.2TablepaepvcCountTablenot-accessiblecurrentThis table shows the paepvc counters.
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1RowpaepvcCountEntrynot-accessiblecurrentAn entry of paepvcCountTable.
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.1ColumnpaepvcCountVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.2ColumnpaepvcCountVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.3ColumnpaepvcCountPppLcpCfgReqRxread-onlycurrentThe number of ppp lcp config-request received.
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.4ColumnpaepvcCountPppLcpEchoReqRxread-onlycurrentThe number of ppp lcp echo-request received.
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.5ColumnpaepvcCountPppLcpEchoReplyRxread-onlycurrentThe number of ppp lcp echo-reply received.
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.6ColumnpaepvcCountPadiTxread-onlycurrentThe number of pppoe padi transfered
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.7ColumnpaepvcCountPadoRxread-onlycurrentThe number of pppoe pado received
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.8ColumnpaepvcCountPadrTxread-onlycurrentThe number of pppoe padr transfered
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.9ColumnpaepvcCountPadsRxread-onlycurrentThe number of pppoe pads received
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.10ColumnpaepvcCountPadtTxread-onlycurrentThe number of pppoe padt transfered
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.11ColumnpaepvcCountPadtRxread-onlycurrentThe number of pppoe padt received
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.12ColumnpaepvcCountSrvcnameErrRxread-onlycurrentThe number of pppoe service name error received
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.13ColumnpaepvcCountAcSystemErrRxread-onlycurrentThe number of pppoe access concentrator name error received
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.14ColumnpaepvcCountGenericErrTxread-onlycurrentThe number of pppoe generic error transfered
1.3.6.1.4.1.890.1.5.13.6.13.12.2.1.15ColumnpaepvcCountGenericErrRxread-onlycurrentThe number of pppoe generic error received
1.3.6.1.4.1.890.1.5.13.6.13.13NodemacStats
1.3.6.1.4.1.890.1.5.13.6.13.13.1ScalarmacDisplayTargetread-writecurrentThis managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the sy…
1.3.6.1.4.1.890.1.5.13.6.13.13.2TablemacTablenot-accessiblecurrentA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.890.1.5.13.6.13.13.2.1RowmacEntrynot-accessiblecurrentAn entry of macTable.
1.3.6.1.4.1.890.1.5.13.6.13.13.2.1.1ColumnmacAddressread-onlycurrentA unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.890.1.5.13.6.13.13.2.1.2ColumnmacPortread-onlycurrentThe port from which the mac address has been learned.
1.3.6.1.4.1.890.1.5.13.6.13.13.2.1.3ColumnmacStatusread-onlycurrentThe status of this entry.
1.3.6.1.4.1.890.1.5.13.6.13.14NodeipbpvcStats
1.3.6.1.4.1.890.1.5.13.6.13.14.1TablearpproxyTablenot-accessiblecurrentDisplay ARP table. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1RowarpproxyEntrynot-accessiblecurrentAn entry of arpproxyTable.
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.1ColumnarpproxyIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.2ColumnarpproxyMacread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.3ColumnarpproxyIfIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.4ColumnarpproxyVpiread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.5ColumnarpproxyVciread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.6ColumnarpproxyInterfaceIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.7ColumnarpproxyInterfaceMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.8ColumnarpproxyInterfaceVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.9ColumnarpproxyDhcpIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.1.1.10ColumnarpproxyTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.2TableipbpvcIfDynamicTablenot-accessiblecurrentDisplay runtime interfaces. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.13.14.2.1RowipbpvcIfDynamicEntrynot-accessiblecurrentAn entry of ipbpvcIfDynamicTable.
1.3.6.1.4.1.890.1.5.13.6.13.14.2.1.1ColumnipbpvcIfDynamicIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.2.1.2ColumnipbpvcIfDynamicMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.2.1.3ColumnipbpvcIfDynamicIfIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.2.1.4ColumnipbpvcIfDynamicVpiread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.2.1.5ColumnipbpvcIfDynamicVciread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.3TableipbpvcRouteDynamicTablenot-accessiblecurrentDisplay runtime routing table. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.6.13.14.3.1RowipbpvcRouteDynamicEntrynot-accessiblecurrentAn entry of ipbpvcRouteDynamicTable.
1.3.6.1.4.1.890.1.5.13.6.13.14.3.1.1ColumnipbpvcRouteDynamicTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.3.1.2ColumnipbpvcRouteDynamicIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.3.1.3ColumnipbpvcRouteDynamicMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.3.1.4ColumnipbpvcRouteDynamicNextHopread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.3.1.5ColumnipbpvcRouteDynamicMetricread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.14.3.1.6ColumnipbpvcRouteDynamicPriorityread-onlycurrent
1.3.6.1.4.1.890.1.5.13.6.13.17NodeloopguardStats
1.3.6.1.4.1.890.1.5.13.6.13.17.1ScalarloopguardSysStatusread-onlycurrentDisplays if any DSL/Enet port on the device enables loopguard.
1.3.6.1.4.1.890.1.5.13.6.13.17.2TableloopguardPortStatsTablenot-accessiblecurrentLoop guard DSL/Enet port statistics table
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1RowloopguardPortStatsEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1.1ColumnloopguardPortStatsLoopDetectedread-onlycurrentDisplays if loop is detected on specific DSL/Enet port.
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1.2ColumnloopguardPortStatsLinkedStateread-onlycurrentDisplays linked state on specific DSL/Enet port.
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1.3ColumnloopguardPortStatsTxPktsread-onlycurrentDisplays counter of transmited loopguard probe packet on specific DSL/Enet port.
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1.4ColumnloopguardPortStatsRxPktsread-onlycurrentDisplays counter of received loopguard probe packet on specific DSL/Enet port.
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1.5ColumnloopguardPortStatsBadPktsread-onlycurrentDisplays counter of received loopguard probe packet with incorrect checksum on specific DSL/Enet port.
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1.6ColumnloopguardPortStatsShutdownTimeread-onlycurrentDisplays port shutdown time for loopguard detection on specific DSL/Enet port.
1.3.6.1.4.1.890.1.5.13.6.13.17.2.1.7ColumnloopguardPortStatsOpsread-writecurrent1 : Clears loopguard statistics (packet counter) on specific DSL/Enet port.
1.3.6.1.4.1.890.1.5.13.6.14Nodeclear
1.3.6.1.4.1.890.1.5.13.6.14.1ScalarcounterClearTargetread-writecurrentThis managed object is used for identify the target on which the counter would be cleared. The target is encoded as: Byte 1: reserved Byte 2~3: reserved Byte 4…
1.3.6.1.4.1.890.1.5.13.6.14.2ScalarcounterClearOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3…
1.3.6.1.4.1.890.1.5.13.6.14.3ScalarcounterClearVpiread-writecurrentVPI of the pvc whose counters would be cleared.
1.3.6.1.4.1.890.1.5.13.6.14.4ScalarcounterClearVciread-writecurrentVCI of the pvc whose counters would be cleared.
MIB Viewer