ZYXEL-MSTP-MIB
71 objects
The subtree for Multiple Spanning Tree Protocol (MSTP)
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePort Timeout |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY Counter32 Integer32 NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | -- RFC2579 DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| ZYXEL-ES-SMI | esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.53 | IdentityzyxelMstp | The subtree for Multiple Spanning Tree Protocol (MSTP) | ||
| 1.3.6.1.4.1.890.1.15.3.53.1 | NodezyxelMstpSetup | |||
| 1.3.6.1.4.1.890.1.15.3.53.1.1 | NodezyxelMstpGeneral | |||
| 1.3.6.1.4.1.890.1.15.3.53.1.1.1 | ScalarzyMstpGeneralState | read-write | current | Enable/Disable MSTP on the switch. |
| 1.3.6.1.4.1.890.1.15.3.53.1.1.2 | ScalarzyMstpGeneralConfigIdName | read-write | current | The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. |
| 1.3.6.1.4.1.890.1.15.3.53.1.1.3 | ScalarzyMstpGeneralConfigIdRevisionLevel | read-write | current | This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier. |
| 1.3.6.1.4.1.890.1.15.3.53.1.1.4 | ScalarzyMstpGeneralHelloTime | read-write | current | The time interval in seconds between BPDU configuration message generations by the root switch. The allowed range is 1 to 10 seconds. |
| 1.3.6.1.4.1.890.1.15.3.53.1.1.5 | ScalarzyMstpGeneralMaxAge | read-write | current | This is the maximum time (in seconds) the switch can wait without receiving a BPDU before attempting to reconfigure |
| 1.3.6.1.4.1.890.1.15.3.53.1.1.6 | ScalarzyMstpGeneralForwardDelay | read-write | current | This is the maximum time (in seconds) the switch will wait before changing states. This delay is required because every switch must receive information about t… |
| 1.3.6.1.4.1.890.1.15.3.53.1.1.7 | ScalarzyMstpGeneralMaxHops | read-write | current | The number of hops (between 1 and 255) in an MSTP region before the BPDU is discarded and the port information is aged. |
| 1.3.6.1.4.1.890.1.15.3.53.1.2 | ScalarzyMstpVlanMapMaxNumberOfInstances | read-only | current | The maximum number of MSTP VLAN instances that can be created. |
| 1.3.6.1.4.1.890.1.15.3.53.1.3 | TablezyxelMstpVlanMapTable | not-accessible | current | The table contains MSTP VLAN map configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.3.1 | RowzyxelMstpVlanMapEntry | not-accessible | current | An entry contains MSTP VLAN map configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.3.1.1 | ColumnzyMstpVlanMapInstance | not-accessible | current | Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation |
| 1.3.6.1.4.1.890.1.15.3.53.1.3.1.2 | ColumnzyMstpVlanMapVlans1k | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.890.1.15.3.53.1.3.1.3 | ColumnzyMstpVlanMapVlans2k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 10… |
| 1.3.6.1.4.1.890.1.15.3.53.1.3.1.4 | ColumnzyMstpVlanMapVlans3k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of… |
| 1.3.6.1.4.1.890.1.15.3.53.1.3.1.5 | ColumnzyMstpVlanMapVlans4k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 30… |
| 1.3.6.1.4.1.890.1.15.3.53.1.3.1.6 | ColumnzyMstpVlanMapRowStatus | read-create | current | This object allow entries to be created and deleted from the MSTP VLAN map table. |
| 1.3.6.1.4.1.890.1.15.3.53.1.4 | TablezyxelMstpPortTable | not-accessible | current | The table contains MSTP port configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.4.1 | RowzyxelMstpPortEntry | not-accessible | current | An entry contains MSTP port configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.4.1.1 | ColumnzyMstpPortAdminEdgePort | read-write | current | The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) ind… |
| 1.3.6.1.4.1.890.1.15.3.53.1.5 | TablezyxelMstpInstanceTable | not-accessible | current | The table contains MSTP instance configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.5.1 | RowzyxelMstpInstanceEntry | not-accessible | current | An entry contains MSTP instance configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.5.1.1 | ColumnzyMstpInstanceId | not-accessible | current | The number you want to use to identify this MST instance on the switch. 0 means CIST. |
| 1.3.6.1.4.1.890.1.15.3.53.1.5.1.2 | ColumnzyMstpInstanceBridgePriority | read-write | current | priority of the switch for the specific spanning tree instance. The lower the number , the more likely the switch will be chosen as the root bridge within the … |
| 1.3.6.1.4.1.890.1.15.3.53.1.6 | TablezyxelMstpInstancePortTable | not-accessible | current | The table contains MSTP instance port configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.6.1 | RowzyxelMstpInstancePortEntry | not-accessible | current | An entry contains MSTP instance port configuration. |
| 1.3.6.1.4.1.890.1.15.3.53.1.6.1.1 | ColumnzyMstpInstancePortInstanceId | not-accessible | current | The number you want to use to identify this MST instance on the switch. 0 means CIST. |
| 1.3.6.1.4.1.890.1.15.3.53.1.6.1.2 | ColumnzyMstpInstancePortState | read-write | current | Enable/Disable this port to the MST instance. |
| 1.3.6.1.4.1.890.1.15.3.53.1.6.1.3 | ColumnzyMstpInstancePortPriority | read-write | current | Port priority. Priority decides which port should be disable when more than one port forms a loop in a switch. Ports with a higher priority numeric value are d… |
| 1.3.6.1.4.1.890.1.15.3.53.1.6.1.4 | ColumnzyMstpInstancePortPathCost | read-write | current | The cost of transmitting a frame on to a LAN through that port. |
| 1.3.6.1.4.1.890.1.15.3.53.2 | NodezyxelMstpStatus | |||
| 1.3.6.1.4.1.890.1.15.3.53.2.1 | NodezyxelMstpInfoGeneral | |||
| 1.3.6.1.4.1.890.1.15.3.53.2.1.1 | ScalarzyMstpInfoGeneralConfigIdName | read-only | current | The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. |
| 1.3.6.1.4.1.890.1.15.3.53.2.1.2 | ScalarzyMstpInfoGeneralConfigIdRevisionLevel | read-only | current | This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier. |
| 1.3.6.1.4.1.890.1.15.3.53.2.1.3 | ScalarzyMstpInfoGeneralConfigIdConfigDigest | read-only | current | A configuration digest is generated from the VLAN-MSTI mapping information. This field displays the 16-octet signature that is included in an MSTP BPDU. This f… |
| 1.3.6.1.4.1.890.1.15.3.53.2.1.4 | ScalarzyMstpInfoGeneralHelloTime | read-only | current | The time interval in seconds between BPDU configuration message generations by the root switch. |
| 1.3.6.1.4.1.890.1.15.3.53.2.1.5 | ScalarzyMstpInfoGeneralMaxAge | read-only | current | This is the maximum time (in seconds) the switch can wait without receiving a BPDU before attempting to reconfigure |
| 1.3.6.1.4.1.890.1.15.3.53.2.1.6 | ScalarzyMstpInfoGeneralForwardDelay | read-write | current | This is the maximum time (in seconds) the switch will wait before changing states. This delay is required because every switch must receive information about t… |
| 1.3.6.1.4.1.890.1.15.3.53.2.1.7 | ScalarzyMstpInfoGeneralCistRootPathCost | read-only | current | This is the path cost from the root port on this switch to the root switch. |
| 1.3.6.1.4.1.890.1.15.3.53.2.1.8 | ScalarzyMstpInfoGeneralCistRootBridgeId | read-only | current | This is the path cost from the root port on this switch to the root switch. |
| 1.3.6.1.4.1.890.1.15.3.53.2.2 | TablezyxelMstpInfoVlanMapTable | not-accessible | current | The table contains MSTP VLAN map information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.2.1 | RowzyxelMstpInfoVlanMapEntry | not-accessible | current | An entry contains MSTP VLAN map information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.2.1.1 | ColumnzyMstpInfoVlanMapVid | not-accessible | current | The VLAN ID for which this entry contains the instance mapped. |
| 1.3.6.1.4.1.890.1.15.3.53.2.2.1.2 | ColumnzyMstpInfoVlanMapInstance | read-only | current | An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped |
| 1.3.6.1.4.1.890.1.15.3.53.2.3 | TablezyxelMstpInfoPortTable | not-accessible | current | The table contains MSTP VLAN map information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.3.1 | RowzyxelMstpInfoPortEntry | not-accessible | current | An entry contains MSTP VLAN map information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.3.1.1 | ColumnzyMstpInfoPortOperEdgePort | read-only | current | The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of zyxelMstpPortAdminEdgePort. When the … |
| 1.3.6.1.4.1.890.1.15.3.53.2.3.1.2 | ColumnzyMstpInfoPortOperPointToPointMAC | read-only | current | The port is operationally connected to a point-to-point link. |
| 1.3.6.1.4.1.890.1.15.3.53.2.4 | TablezyxelMstpInfoInstanceTable | not-accessible | current | The table contains MSTP instance information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.4.1 | RowzyxelMstpInfoInstanceEntry | not-accessible | current | An entry contains MSTP instance information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.4.1.1 | ColumnzyMstpInfoInstanceId | not-accessible | current | the number you want to use to identify this MST instance on the switch. 0 means CIST. |
| 1.3.6.1.4.1.890.1.15.3.53.2.4.1.2 | ColumnzyMstpInfoInstanceBridgeId | read-only | current | this is the unique identifier for this bridge, consisting of bridge priority plus MAC address. This ID is the same for root and our bridge if the switch is the… |
| 1.3.6.1.4.1.890.1.15.3.53.2.4.1.3 | ColumnzyMstpInfoInstanceInternalRootCost | read-only | current | This is the path cost from the root port in this MST instance to the regional root switch. |
| 1.3.6.1.4.1.890.1.15.3.53.2.4.1.4 | ColumnzyMstpInfoInstanceRootPort | read-only | current | This is the priority and number of the port on the switch through which this switch must communicate with the root of the MST instance. |
| 1.3.6.1.4.1.890.1.15.3.53.2.4.1.5 | ColumnzyMstpInfoInstanceTimeSinceTopologyChange | read-only | current | This is the time since the spanning tree was last reconfigured. |
| 1.3.6.1.4.1.890.1.15.3.53.2.4.1.6 | ColumnzyMstpInfoInstanceTopologyChangesCount | read-only | current | This is the number of times the spanning tree has been reconfigured. |
| 1.3.6.1.4.1.890.1.15.3.53.2.5 | TablezyxelMstpInfoInstancePortTable | not-accessible | current | The table contains MSTP instance port information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1 | RowzyxelMstpInfoInstancePortEntry | not-accessible | current | An entry contains MSTP instance port information. |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1.1 | ColumnzyMstpInfoInstancePortInstanceId | not-accessible | current | The number you want to use to identify this MST instance on the switch. 0 means CIST. |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1.2 | ColumnzyMstpInfoInstancePortPathCost | read-only | current | The cost of transmitting a frame on to a LAN through that port. |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1.3 | ColumnzyMstpInfoInstancePortState | read-only | current | STP assigns five port states to eliminate packet looping. A bridge port is not allowed to go directly from blocking state to forwarding state so as to eliminat… |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1.4 | ColumnzyMstpInfoInstancePortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1.5 | ColumnzyMstpInfoInstancePortDesignatedCost | read-only | current | The path cost of the Designated Port is connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1.6 | ColumnzyMstpInfoInstancePortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.890.1.15.3.53.2.5.1.7 | ColumnzyMstpInfoInstancePortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.890.1.15.3.53.3 | NodezyxelMstpNotifications | |||
| 1.3.6.1.4.1.890.1.15.3.53.3.1 | NotificationzyMstpNewRoot | current | The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new… | |
| 1.3.6.1.4.1.890.1.15.3.53.3.2 | NotificationzyMstpTopologyChange | current | A topologyChange is sent if the topology changed of MSTP has detected. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MstiOrCistInstanceIndex | Integer32 (0..16) | current | This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST). |