ZYXEL-PORT-AUTHENTICATION-MIB
18 objects
The subtree for port authentication
Imported Objects
| BRIDGE-MIB | dot1dBasePort |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY OBJECT-TYPE |
| ZYXEL-ES-SMI | esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.62 | IdentityzyxelPortAuthentication | The subtree for port authentication | ||
| 1.3.6.1.4.1.890.1.15.3.62.1 | NodezyxelPortAuthenticationSetup | |||
| 1.3.6.1.4.1.890.1.15.3.62.1.1 | ScalarzyPortAuthenticationState | read-write | current | Enable/Disable 802.1x port authentication for the switch. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2 | TablezyxelPortAuthenticationPortTable | not-accessible | current | The table contains port authentication configuration |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1 | RowzyxelPortAuthenticationPortEntry | not-accessible | current | An entry contains port authentication configuration. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.1 | ColumnzyPortAuthenticationPortState | read-write | current | Enable/Disable 802.1x port authentication on the port. You must first allow 802.1x authentication on the Switch before configuring it on each port. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.2 | ColumnzyPortReAuthenticationPortState | read-write | current | Enable/Disable 802.1x port re-authentication on the port. Specify if a subscriber has to periodically re-enter his or her username and password to stay connect… |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.3 | ColumnzyPortReAuthenticationPortTimer | read-write | current | Specify the length of time required to pass before a client has to re-enter his or her username and password to stay connected to the port. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.4 | ColumnzyPortAuthenticationPortQuietPeriod | read-write | current | Specify the number of seconds the port remains in the HELD state and rejects further authentication requests from the connected client after a failed authentic… |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.5 | ColumnzyPortAuthenticationPortTxPeriod | read-write | current | Specify the number of seconds the Switch waits for client's response before re-sending an identity request to the client. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.6 | ColumnzyPortAuthenticationPortSupplicantTimeout | read-write | current | Specify the number of seconds the Switch waits for client's response to a challenge request before sending another request. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.7 | ColumnzyPortAuthenticationPortMaxRequest | read-write | current | Specify the number of times the Switch tries to authenticate client(s) before sending unresponsive ports to the Guest VLAN. This is set to 2 by default. That i… |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.8 | ColumnzyPortAuthenticationPortGuestVlanState | read-write | current | Enable/Disable Guest VLAN on the port. Clients that fail authentication are placed in the guest VLAN and can receive limited services. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.9 | ColumnzyPortAuthenticationPortGuestVlan | read-write | current | Enter the number that identifies the guest VLAN. Make sure this is a VLAN recognized in your network. A guest VLAN is a pre-configured VLAN on the Switch that … |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.10 | ColumnzyPortAuthenticationPortGuestVlanHostMode | read-write | current | Specify how the Switch authenticates users when more than one user connect to the port (using a hub). Select Multi-Host to authenticate only the first user tha… |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.11 | ColumnzyPortAuthenticationPortGuestVlanHostModeMultiSecureNumber | read-write | current | If you set Host-mode to Multi-Secure, specify the maximum number of users that the Switch will authenticate on this port. |
| 1.3.6.1.4.1.890.1.15.3.62.1.2.1.12 | ColumnzyPortAuthenticationPortCompoundAuthenticationMode | read-write | current | Set compound authentication mode at strict mode or loose mode for the switch. Users can use this setting to choise authentication strict or loose of 802.1x and… |
| 1.3.6.1.4.1.890.1.15.3.62.1.3 | ScalarzyPortAuthenticationEapolFloodState | read-write | current | Enable/Disable EAPoL flood for the switch. Users can use this setting to control forwarding of EAPoL packet when 802.1x function is disable. |