ZYXEL-PORT-MIB
24 objects
The subtree for port
Imported Objects
| BRIDGE-MIB | dot1dBasePort |
| IF-MIB | ifIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY -- RFC2863 NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| ZYXEL-ES-SMI | esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.61 | IdentityzyxelPort | The subtree for port | ||
| 1.3.6.1.4.1.890.1.15.3.61.1 | NodezyxelPortSetup | |||
| 1.3.6.1.4.1.890.1.15.3.61.1.1 | TablezyxelPortTable | not-accessible | current | The table contains port configuration. |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1 | RowzyxelPortEntry | not-accessible | current | An entry contains port configuration. |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1.1 | ColumnzyPortSpeedDuplex | read-write | current | Select The speed and the duplex mode of the Ethernet connection on this port. Selecting Auto (auto-negotiation) allows one port to negotiate with a peer port a… |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1.2 | ColumnzyPortFlowControlState | read-write | current | Enable/Disable the flow control on this port. A concentration of traffic on a port decreases port bandwidth and overflows buffer memory causing packet discards… |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1.3 | ColumnzyPortName | read-write | current | Enter a descriptive name that identifies this port. |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1.4 | ColumnzyPortIntrusionLockState | read-write | current | Enable/Disable intrusion lock on the port(s) and the port cannot be connected again after you disconnected the cable. |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1.5 | ColumnzyPortCX4CableLength | read-write | current | Set the number of meters for the length of the 10GBASE-CX4 cable you use to connect between the swtich and another switch for stacking. |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1.6 | ColumnzyPort10GMediaType | read-write | current | Set the 10GBase media type. |
| 1.3.6.1.4.1.890.1.15.3.61.1.1.1.7 | ColumnzyPortExtendRangeState | read-write | current | Enable/Disable the extend-range mode on this port. |
| 1.3.6.1.4.1.890.1.15.3.61.2 | NodezyxelPortStatus | |||
| 1.3.6.1.4.1.890.1.15.3.61.2.1 | TablezyxelPortInfoTable | not-accessible | current | The table contains port information. |
| 1.3.6.1.4.1.890.1.15.3.61.2.1.1 | RowzyxelPortInfoEntry | not-accessible | current | An entry contains port information. |
| 1.3.6.1.4.1.890.1.15.3.61.2.1.1.1 | ColumnzyPortModuleType | read-only | current | This entry displays the speed type of modular. |
| 1.3.6.1.4.1.890.1.15.3.61.2.1.1.2 | ColumnzyPortLinkUpType | read-only | current | The entry shows the linkUp cable type (copper, fiber, xfp or cx4) for the combo ports. |
| 1.3.6.1.4.1.890.1.15.3.61.2.1.1.3 | ColumnzyPortTestStatus | read-only | current | This entry displays latest loopback test status of port while performing loopback test. |
| 1.3.6.1.4.1.890.1.15.3.61.2.1.1.4 | ColumnzyPortCounterReset | read-write | current | Enable this entry can reset port counter record. |
| 1.3.6.1.4.1.890.1.15.3.61.2.1.1.5 | ColumnzyPortUtilizationRx | read-only | current | This entry display the percentage of port utilization per second received on this port. |
| 1.3.6.1.4.1.890.1.15.3.61.2.1.1.6 | ColumnzyPortUtilizationTx | read-only | current | This entry display the percentage of port utilization per second transmitted on this port. |
| 1.3.6.1.4.1.890.1.15.3.61.3 | NodezyxelPortNotifications | |||
| 1.3.6.1.4.1.890.1.15.3.61.3.1 | NotificationzyPortAutonegotiationFailed | current | Link speed and duplex mode autonegotiation has failed. | |
| 1.3.6.1.4.1.890.1.15.3.61.3.2 | NotificationzyPortIntrusionLock | current | The cable is disconnected and the port cannot be connected again. | |
| 1.3.6.1.4.1.890.1.15.3.61.3.3 | NotificationzyPortAutonegotiationFailedRecovered | current | Link speed and duplex mode autonegotiation has recovered from failed. |