ZYXEL-REMOTE-PORT-MIRROR-MIB
15 objects
The subtree for remote port mirror
Imported Objects
| P-BRIDGE-MIB | -- RFC2579 EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| ZYXEL-ES-SMI | esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.73 | IdentityzyxelRemotePortMirror | The subtree for remote port mirror | ||
| 1.3.6.1.4.1.890.1.15.3.73.1 | NodezyxelRemotePortMirrorSetup | |||
| 1.3.6.1.4.1.890.1.15.3.73.1.1 | ScalarzyRemotePortMirrorMaxNumberOfVlans | read-only | current | The maximum number of remote mirror VLAN entries that can be created. |
| 1.3.6.1.4.1.890.1.15.3.73.1.2 | TablezyxelRemotePortMirrorTable | not-accessible | current | The table contains remote port mirror configuration. |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1 | RowzyxelRemotePortMirrorEntry | not-accessible | current | An entry contains remote port mirror configuration. |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.1 | ColumnzyRemotePortMirrorVid | not-accessible | current | Enter the VLAN ID (1 to 4094) of the remote mirror VLAN. |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.2 | ColumnzyRemotePortMirrorSource8021pPriority | read-write | current | Select a priority level (0-7) with which the Switch replaces the priority of packets from source port (belonging to this remote mirror VLAN). |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.3 | ColumnzyRemotePortMirrorSourceIngressMirrorPorts | read-write | current | Set port members to be the source ingress mirror-port. The mirror-port is the port traffic that we mirrored: 1. Mirror-ports is only existed in source switch. … |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.4 | ColumnzyRemotePortMirrorSourceEgressMirrorPorts | read-write | current | Set port members to be the source egress mirror-port. The mirror-port is the port traffic that we mirrored: 1. Mirror-ports is only existed in source switch. 2… |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.5 | ColumnzyRemotePortMirrorSourceReflectorPortState | read-write | current | Enable/disable multi-mirroring on RMirror Source. Once the multi-mirroring is enabled, the reflector-port can be used in the RMirrore Source. |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.6 | ColumnzyRemotePortMirrorSourceReflectorPort | read-write | current | Set port members to be the source reflector-port. The reflector port is the mechanism that copies packets onto an remote mirror VLAN. The reflector port forwar… |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.7 | ColumnzyRemotePortMirrorDestinationMonitorPort | read-write | current | Set the port number of the destination monitor port. The monitor-port is the port that we can monitor the RMirror traffic: 1. A monitor-port is only in destina… |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.8 | ColumnzyRemotePortMirrorDestinationMonitorPortTagging | read-write | current | Enable/Disable the destination monitor port which packet with tag. |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.9 | ColumnzyRemotePortMirrorConnectedPorts | read-write | current | Set port members to be the connected-port. The connected-port is the physical port connected to other switch in the same remote mirror VLAN: 1. The port must j… |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.10 | ColumnzyRemotePortMirrorRowStatus | read-create | current | This object allows entries to be created and deleted from the remote mirror table. |