MIB Viewer

ZYXEL-SAM1216

454 objects
No module-level DESCRIPTION found.
Imported Objects
BRIDGE-MIBBridgeId MacAddress Timeout
Q-BRIDGE-MIBdot1qVlanIndex PortList VlanIndex
RFC1155-SMIenterprises
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.890Nodezyxel
1.3.6.1.4.1.890.1Nodeproducts
1.3.6.1.4.1.890.1.5NodeaccessSwitch
1.3.6.1.4.1.890.1.5.5NodesesSeries
1.3.6.1.4.1.890.1.5.5.6Nodesam1216-22
1.3.6.1.4.1.890.1.5.5.6.2Nodealarmconf
1.3.6.1.4.1.890.1.5.5.6.2.1ScalaralarmOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.890.1.5.5.6.2.2TablealarmConfTablenot-accessiblecurrentThis table includes alarm configuration.
1.3.6.1.4.1.890.1.5.5.6.2.2.1RowalarmConfEntrynot-accessiblecurrentAn entry in alarmConfTable.
1.3.6.1.4.1.890.1.5.5.6.2.2.1.1ColumnalarmConfIdread-onlycurrent5000: linkUp 5001: linkDown 5002: shdslLoopAttenCrossing 5003: shdslSNRMarginCrossing 5004: shdslPerfESThresh 5005: shdslPerfSESThresh 5006: shdslPerfCRCAnomal…
1.3.6.1.4.1.890.1.5.5.6.2.2.1.2ColumnalarmConfFacilityread-writecurrentAlarm facility.
1.3.6.1.4.1.890.1.5.5.6.2.2.1.3ColumnalarmConfTargetread-writecurrentThe destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
1.3.6.1.4.1.890.1.5.5.6.2.2.1.4ColumnalarmConfSeverityread-writecurrentAlarm severity
1.3.6.1.4.1.890.1.5.5.6.2.2.1.5ColumnalarmConfClearableread-writecurrentSetting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
1.3.6.1.4.1.890.1.5.5.6.2.3TablealarmCurrTablenot-accessiblecurrentThis table includes current alarm information.
1.3.6.1.4.1.890.1.5.5.6.2.3.1RowalarmCurrEntrynot-accessiblecurrentAn entry in alarmCurrTable.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.1ColumnalarmCurrIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.2ColumnalarmCurrOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.3ColumnalarmCurrTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.4ColumnalarmCurrParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.5ColumnalarmCurrParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.6ColumnalarmCurrParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.7ColumnalarmCurrParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.8ColumnalarmCurrParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.9ColumnalarmCurrParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.10ColumnalarmCurrParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.11ColumnalarmCurrParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.12ColumnalarmCurrTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.890.1.5.5.6.2.3.1.13ColumnalarmCurrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.3.1.14ColumnalarmCurrDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.890.1.5.5.6.2.4TablealarmSeverityPortTablenot-accessiblecurrentThis table includes the configuration of alarm reporting severity threshold for each port.
1.3.6.1.4.1.890.1.5.5.6.2.4.1RowalarmSeverityPortEntrynot-accessiblecurrentAn entry in alarmSeverityPortTable.
1.3.6.1.4.1.890.1.5.5.6.2.4.1.1ColumnseverityThreshread-writecurrentThe minimum alarm severity that is reported.
1.3.6.1.4.1.890.1.5.5.6.7Nodemulticast
1.3.6.1.4.1.890.1.5.5.6.7.1ScalarigmpEnableread-writecurrentEnable/disable IGMP protocol.
1.3.6.1.4.1.890.1.5.5.6.7.4NodemcastBandwidth
1.3.6.1.4.1.890.1.5.5.6.7.4.1ScalarmcastDefaultBandwidthread-writecurrentDefault bandwidth requirement for a multicast channel.
1.3.6.1.4.1.890.1.5.5.6.7.4.2ScalarmaxNumOfMcastBwread-onlycurrentThe maximum number of row entries that user can create in mcastBwTable.
1.3.6.1.4.1.890.1.5.5.6.7.4.3TablemcastBwTablenot-accessiblecurrentThis table defines bandwidth budget for a range of multicast IP channels.
1.3.6.1.4.1.890.1.5.5.6.7.4.3.1RowmcastBwEntrynot-accessiblecurrentAn entry of mcastBwTable.
1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.1ColumnmcastBwIndexread-onlycurrentThe index which specify the entry.
1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.2ColumnmcastBwStartIpread-createcurrentThe start multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.3ColumnmcastBwEndIpread-createcurrentThe end multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.4ColumnmcastBwBandwidthread-createcurrentThe bandwidth budget for the multicast IP channels.
1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.5ColumnmcastBwRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.5.6.7.4.4TablemcastBwPortTablenot-accessiblecurrentThis table specify the multicast bandwidth control of the port.
1.3.6.1.4.1.890.1.5.5.6.7.4.4.1RowmcastBwPortEntrynot-accessiblecurrentAn entry of mcastBwPortTable.
1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.1ColumnmcastBwPortEnableread-writecurrentEnable/disable multicast bandwidth control for a port.
1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.2ColumnmcastBwPortBandwidthread-writecurrentSet bandwidth threshold for a port.
1.3.6.1.4.1.890.1.5.5.6.7.5NodeigmpCount
1.3.6.1.4.1.890.1.5.5.6.7.5.1TableigmpCountPortTablenot-accessiblecurrentThis table specify the IGMP count limiting of the port.
1.3.6.1.4.1.890.1.5.5.6.7.5.1.1RowigmpCountPortEntrynot-accessiblecurrentAn entry of igmpCountPortTable.
1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.1ColumnigmpCountPortEnableread-writecurrentEnable/disable IGMP count limiting for a port.
1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.2ColumnigmpCountPortLimitread-writecurrentThe maximum allowed IGMP report count for a port.
1.3.6.1.4.1.890.1.5.5.6.7.6Nodemvlan
1.3.6.1.4.1.890.1.5.5.6.7.6.1ScalarmaxNumOfMvlanread-onlycurrentThe maximum number of row entries that user can create in mvlanTable.
1.3.6.1.4.1.890.1.5.5.6.7.6.2TablemvlanTablenot-accessiblecurrentA table containing static configuration information for each multicast VLAN configured into the device.
1.3.6.1.4.1.890.1.5.5.6.7.6.2.1RowmvlanEntrynot-accessiblecurrentAn entry of mvlanTable.
1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.1ColumnmvlanIndexread-onlycurrentThe VLAN-ID refering to this VLAN.
1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.2ColumnmvlanNameread-createcurrentAn administratively assigned string, which may be used to identify the VLAN.
1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.3ColumnmvlanEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this multicast VLAN.
1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.4ColumnmvlanUntaggedPortsread-createcurrentThe set of ports which should transmit egress packets for this multicast VLAN as untagged.
1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.5ColumnmvlanRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.5.6.7.6.3TablemvlanTranslateTablenot-accessiblecurrentA table that contains multicast to VLAN translation.
1.3.6.1.4.1.890.1.5.5.6.7.6.3.1RowmvlanTranslateEntrynot-accessiblecurrentAn entry of mvlanTranslateTable.
1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.1ColumnmvlanTranslateIndexread-onlycurrentThe index which specif the entry.
1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.2ColumnmvlanTranslateStartIpread-writecurrentThe start IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.3ColumnmvlanTranslateEndIpread-writecurrentThe end IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.5.6.7.7ScalarigmpVersionread-writecurrentSetting IGMP version.
1.3.6.1.4.1.890.1.5.5.6.7.7NodequeryVid
1.3.6.1.4.1.890.1.5.5.6.7.7.1ScalarmaxNumOfQryVidread-onlycurrentThe maximum number of row entries that user can create in qryVidConfTable. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.5.6.7.7.2TableqryVidConfTablenot-accessiblecurrentThis table defines statically set VLANs used for response IGMP report. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.5.6.7.7.2.1RowqryVidConfEntrynot-accessiblecurrentAn entry in qryVidConfTable.
1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.1ColumnqryVidread-onlycurrentVLAN ID.
1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.2ColumnqryVidRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.5.6.7.7.3TableqryVidStatusTablenot-accessiblecurrentThis table shows statically set or dynamically learned VLANs used for response IGMP report.
1.3.6.1.4.1.890.1.5.5.6.7.7.3.1RowqryVidStatusEntrynot-accessiblecurrentAn entry in qryVidStatusTable.
1.3.6.1.4.1.890.1.5.5.6.7.7.3.1.1ColumnqryVidTyperead-onlycurrentVLAN type.
1.3.6.1.4.1.890.1.5.5.6.8Nodeport
1.3.6.1.4.1.890.1.5.5.6.8.1TablesubrPortTablenot-accessiblecurrentThis table includes subscriber attributes for the port.
1.3.6.1.4.1.890.1.5.5.6.8.1.1RowsubrPortEntrynot-accessiblecurrentAn entry in subrPortTable.
1.3.6.1.4.1.890.1.5.5.6.8.1.1.1ColumnsubrPortNameread-writecurrentName of the subscriber.
1.3.6.1.4.1.890.1.5.5.6.8.1.1.2ColumnsubrPortTelread-writecurrentTelephone number of the subscriber.
1.3.6.1.4.1.890.1.5.5.6.8.3NodeshdslPort
1.3.6.1.4.1.890.1.5.5.6.8.3.1TableshdslLineConfTablenot-accessiblecurrentThis table includes common attributes describing the SHDSL line.
1.3.6.1.4.1.890.1.5.5.6.8.3.1.1RowshdslLineConfEntrynot-accessiblecurrentAn entry in shdslLineConfTable.
1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.1ColumnshdslLineConfShdslModeread-writecurrentMode of the SHDSL port.
1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.2ColumnshdslLineConfPmmsread-writecurrentNegotiated noise margin mode of the SHDSL port.
1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.3ColumnshdslLineConfPboModeread-writecurrentPower backoff mode of the SHDSL port.
1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.4ColumnshdslLineConfPboValueread-writecurrentPower backoff value of the SHDSL port.
1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.5ColumnshdslLineConfShdslTCModeread-writecurrentTransmission Convergence Mode of the SHDSL port.
1.3.6.1.4.1.890.1.5.5.6.8.3.2NodeshdslPortBatchSet
1.3.6.1.4.1.890.1.5.5.6.8.3.2.1ScalarshdslPortTargetread-writecurrentThe managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies a…
1.3.6.1.4.1.890.1.5.5.6.8.3.2.2ScalarshdslPortOpsread-writecurrentThe managed object is for SHDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspon…
1.3.6.1.4.1.890.1.5.5.6.8.3.2.3ScalarshdslModeForBatchSetread-writecurrentMode of the SHDSL port.
1.3.6.1.4.1.890.1.5.5.6.8.3.2.4ScalarshdslLineProfileForBatchSetread-writecurrentThe SHDSL line profile.
1.3.6.1.4.1.890.1.5.5.6.8.3.2.5ScalarshdslAlarmProfileForBatchSetread-writecurrentThe SHDSL alarm profile.
1.3.6.1.4.1.890.1.5.5.6.8.3.2.6ScalarshdslPboValueForBatchSetread-writecurrentPower backoff value of the SHDSL port.
1.3.6.1.4.1.890.1.5.5.6.8.4Nodepvc
1.3.6.1.4.1.890.1.5.5.6.8.4.1ScalarmaxNumOfPvcsread-onlycurrentThe maximum number of PVCs which could be created on a port.
1.3.6.1.4.1.890.1.5.5.6.8.4.2TablepvcTablenot-accessiblecurrentThis table includes PVC configuration.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1RowpvcEntrynot-accessiblecurrentAn entry in pvcTable.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.1ColumnpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.2ColumnpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.3ColumnpvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.5ColumnpvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.6ColumnpvcProfileDSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.7ColumnpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.8ColumnpvcProfileUSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
1.3.6.1.4.1.890.1.5.5.6.8.4.4TablepvcUsRateLimitTablenot-accessiblecurrentThis table defines the upstream rate limit for each PVC.
1.3.6.1.4.1.890.1.5.5.6.8.4.4.1RowpvcUsRateLimitEntrynot-accessiblecurrentAn entry in pvcUsRateLimitTable.
1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.1ColumnpvcUsRateLimitEnableread-writecurrentEnable/disable upstream rate limit for a PVC.
1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.2ColumnpvcUsRateLimitread-writecurrentUpstream rate limit in Kbps for a PVC.
1.3.6.1.4.1.890.1.5.5.6.8.5Nodeppvc
1.3.6.1.4.1.890.1.5.5.6.8.5.1ScalarmaxNumOfPriorityPvcsread-onlycurrentThe maximum number of priority PVCs which could be created on a port.
1.3.6.1.4.1.890.1.5.5.6.8.5.2TableppvcTablenot-accessiblecurrentThis table includes priority PVC configuration.
1.3.6.1.4.1.890.1.5.5.6.8.5.2.1RowppvcEntrynot-accessiblecurrentAn entry in ppvcTable.
1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.1ColumnppvcVpiread-onlycurrentVPI of the ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.2ColumnppvcVciread-onlycurrentVCI of the ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.3ColumnppvcPvidread-onlycurrentDefault VID of the ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.4ColumnppvcEncapread-createcurrentEncapsulation of the ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.5ColumnppvcPriorityread-createcurrent802.1p default priority of the ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.6ColumnppvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.5.4TableppvcMemberTablenot-accessiblecurrentThis table includes priority PVC member configuration.
1.3.6.1.4.1.890.1.5.5.6.8.5.4.1RowppvcMemberEntrynot-accessiblecurrentAn entry in ppvcMemberTable.
1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.1ColumnppvcMemberVpiread-onlycurrentVPI of the member ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.2ColumnppvcMemberVciread-onlycurrentVCI of the member ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.3ColumnppvcMemberPriorityread-onlycurrent802.1p default priority of the member ppvc.
1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.4ColumnppvcMemberProfileDSread-createcurrentThe profile of the member ppvc in DS side.
1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.5ColumnppvcMemberRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.6ColumnppvcMemberProfileUSread-createcurrentThe profile of the member ppvc in US side.
1.3.6.1.4.1.890.1.5.5.6.8.6NodeportOperation
1.3.6.1.4.1.890.1.5.5.6.8.6.1ScalarportTargetread-writecurrentThe managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies a…
1.3.6.1.4.1.890.1.5.5.6.8.6.2ScalarportOpsread-writecurrentThe managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.890.1.5.5.6.8.8Noderpvc
1.3.6.1.4.1.890.1.5.5.6.8.8.1TablerpvcGatewayTablenot-accessiblecurrentThis table includes Routed Gateway configuration.
1.3.6.1.4.1.890.1.5.5.6.8.8.1.1RowrpvcGatewayEntrynot-accessiblecurrentAn entry in Routed Gateway table.
1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.1ColumnrpvcGatewayIpread-onlycurrentIP of RPVC gateway.
1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.2ColumnrpvcGatewayVlanIdread-writecurrentVlan id send to this RPVC gateway.
1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.3ColumnrpvcGatewayRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.4ColumnrpvcGatewayPriorityread-writecurrent802.1p p bit send to this RPVC gateway.
1.3.6.1.4.1.890.1.5.5.6.8.8.2TablerpvcTablenot-accessiblecurrentThis table includes RPVC configuration.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1RowrpvcTableEntrynot-accessiblecurrentAn entry in rpvcTable.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.1ColumnrpvcVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.2ColumnrpvcVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.3ColumnrpvcDSProfileread-createcurrentThe down stream profile of the rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.4ColumnrpvcUSProfileread-createcurrentThe up stream profile of the rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.5ColumnrpvcIpread-onlycurrentThe IP of the rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.6ColumnrpvcNetmaskread-onlycurrentThe IP mask of the rpvc IP.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.7ColumnrpvcGatewayIpAddressread-createcurrentThe gateway IP of rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.8ColumnrpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.8.3TablerpvcRouteDomainTablenot-accessiblecurrentThis table includes RPVC route domain configuration.
1.3.6.1.4.1.890.1.5.5.6.8.8.3.1RowrpvcRouteDomainTableEntrynot-accessiblecurrentAn entry in rpvcRouteDomainTable.
1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.1ColumnrpvcRouteDomainVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.2ColumnrpvcRouteDomainVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.3ColumnrpvcRouteDomainIpread-onlycurrentThe route domain IP.
1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.4ColumnrpvcRouteDomainNetmaskread-onlycurrentThe IP mask of the route domain IP.
1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.5ColumnrpvcRouteDomainRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.8.4ScalarrpvcArpAgingTimeread-writecurrentSet RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg.
1.3.6.1.4.1.890.1.5.5.6.8.8.5ScalarrpvcArpFlushread-writecurrentFlush the RPVC ARP proxy table.
1.3.6.1.4.1.890.1.5.5.6.8.9TabledsBcastDisableTablenot-accessiblecurrentThis table includes Down Stream Bcast configuration.
1.3.6.1.4.1.890.1.5.5.6.8.9.1RowdsBcastDisableEntrynot-accessiblecurrentAn entry in Down Stream Bcast table.
1.3.6.1.4.1.890.1.5.5.6.8.9.1.1ColumndsBcastDisableVlanIdread-onlycurrentdownstream broadcast disabled vid.
1.3.6.1.4.1.890.1.5.5.6.8.9.1.2ColumndsBcastDisableRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.10Nodepaepvc
1.3.6.1.4.1.890.1.5.5.6.8.10.1TablepaepvcTablenot-accessiblecurrentThis table includes PPPoAoE PVC configuration.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1RowpaepvcEntrynot-accessiblecurrentAn entry of paepvcTable.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.1ColumnpaepvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.2ColumnpaepvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.3ColumnpaepvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.5ColumnpaepvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.6ColumnpaepvcProfileDSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.7ColumnpaepvcAcNameread-createcurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.8ColumnpaepvcServiceNameread-createcurrentService name.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.9ColumnpaepvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.10ColumnpaepvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.11ColumnpaepvcProfileUSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
1.3.6.1.4.1.890.1.5.5.6.8.11Nodetlspvc
1.3.6.1.4.1.890.1.5.5.6.8.11.1TabletlspvcTablenot-accessiblecurrentThis table includes Transparent LAN Service (TLS) PVC configuration.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1RowtlspvcEntrynot-accessiblecurrentAn entry of tlspvcTable.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.1ColumntlspvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.2ColumntlspvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.3ColumntlspvcSvidread-onlycurrents-tag VLAN ID of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.5ColumntlspvcSpriorityread-createcurrents-tag priority of the pvc.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.6ColumntlspvcProfileDSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.7ColumntlspvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.8ColumntlspvcProfileUSread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
1.3.6.1.4.1.890.1.5.5.6.8.51Nodegbond
1.3.6.1.4.1.890.1.5.5.6.8.51.1TablegbondGroupTablenot-accessiblecurrentA table containing the G.Bond configuration information for each bonding group of the device.
1.3.6.1.4.1.890.1.5.5.6.8.51.1.1RowgbondGroupEntrynot-accessiblecurrentAn entry of gbondTable.
1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.1ColumngbondGroupNameread-onlycurrentAn administratively assigned string, which may be used to identify bonding group.
1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.2ColumngbondGroupPortsread-createcurrentThe set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved…
1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.3ColumngbondGroupSidread-createcurrentThis object indicates the sequence index mode of the bonding group.
1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.4ColumngbondGroupUpRateread-onlycurrentThe UP stream rate.
1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.5ColumngbondGroupDownRateread-onlycurrentThe DOWN stream rate.
1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.6ColumngbondGroupRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.5.6.10Nodeswitch
1.3.6.1.4.1.890.1.5.5.6.10.10Nodedscp
1.3.6.1.4.1.890.1.5.5.6.10.10.1TabledscpMappingTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl and ethernet ports.
1.3.6.1.4.1.890.1.5.5.6.10.10.1.1RowdscpMappingEntrynot-accessiblecurrentAn entry of dscpMappingTable.
1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.1ColumndscpSrcCodePointread-onlycurrentThe DSCP source code point used for mapping.
1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.3ColumndscpMapPriorityread-writecurrentThe mapping p bits that will replace the source p bits in the incoming packet.
1.3.6.1.4.1.890.1.5.5.6.10.10.2TabledscpPortTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl and ethernet ports.
1.3.6.1.4.1.890.1.5.5.6.10.10.2.1RowdscpPortEntrynot-accessiblecurrentAn entry of dscpPortTable.
1.3.6.1.4.1.890.1.5.5.6.10.10.2.1.1ColumndscpStatusEnableread-writecurrentThe DSCP port status.
1.3.6.1.4.1.890.1.5.5.6.10.12NodevlanIsolation
1.3.6.1.4.1.890.1.5.5.6.10.12.1TablevlanIsolationTablenot-accessiblecurrentA table contains configuration of isolated VLAN.
1.3.6.1.4.1.890.1.5.5.6.10.12.1.1RowvlanIsolationEntrynot-accessiblecurrentAn entry of vlanIsolationTable.
1.3.6.1.4.1.890.1.5.5.6.10.12.1.1.1ColumnvlanIsolationRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.5.6.10.13NodeenetMtu
1.3.6.1.4.1.890.1.5.5.6.10.13.1ScalarenetMaxMturead-writecurrentSets the maximum MTU size for layer 2 frame, size from 1526 to 1600, default value is 1526.
1.3.6.1.4.1.890.1.5.5.6.10.51Nodedhcp
1.3.6.1.4.1.890.1.5.5.6.10.51.1ScalardhcpRelayEnableread-writecurrentEnable/disable DHCP relay Option82 function.
1.3.6.1.4.1.890.1.5.5.6.10.51.2TabledhcpRelay82Tablenot-accessiblecurrentA table that contains DHCP Relay configuration.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1RowdhcpRelay82Entrynot-accessiblecurrentThe entry of DHCP Relay table.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.1ColumndhcpRelay82PrimaryServerread-writecurrentThe IP address of the DHCP Relay primary server.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.2ColumndhcpRelay82SecondaryServerread-writecurrentThe IP address of the DHCP Relay secondary server.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.3ColumndhcpRelay82ActiveServerread-writecurrentThe current active DHCP Relay server.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.4ColumndhcpRelay82Enableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.5ColumndhcpRelay82Inforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.6ColumndhcpRelay82RelayModeread-createcurrentDHCP relay mode.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.8ColumndhcpRelay82Suboption2Enableread-createcurrentEnable/disable Option 82 sub-option 2.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.9ColumndhcpRelay82Suboption2Inforead-createcurrentUser specified information for Option 82 sub-option 2.
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.10ColumndhcpRelay82EntryEnableread-createcurrentEnable/disable DHCP Relay
1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.11ColumndhcpRelay82EntryOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.890.1.5.5.6.10.51.3ScalardhcpRelayOption82Sub1Inforead-writecurrentUser specific Option82 subOption1 (Agent circuit ID) information.
1.3.6.1.4.1.890.1.5.5.6.10.51.4ScalarmaxNumOfDhcpRelay82Confread-onlycurrentThe maximum number of rows that can be created in dhcpRelay82Table.
1.3.6.1.4.1.890.1.5.5.6.10.51.5ScalardhcpRelayOption82Sub1Enableread-writecurrentEnable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function.
1.3.6.1.4.1.890.1.5.5.6.10.51.6ScalardhcpRelayOption82Sub2Inforead-writecurrentUser specific Option82 subOption2 (Agent Remote ID) information.
1.3.6.1.4.1.890.1.5.5.6.10.51.7ScalardhcpRelayOption82Sub2Enableread-writecurrentEnable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function.
1.3.6.1.4.1.890.1.5.5.6.10.53Nodemacfilter
1.3.6.1.4.1.890.1.5.5.6.10.53.1TablemacFilterPortTablenot-accessiblecurrentThis table includes the status of mac filtering for each port.
1.3.6.1.4.1.890.1.5.5.6.10.53.1.1RowmacFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.1ColumnmacFilterPortEnableread-writecurrentEnable/disable MAC filtering for the port.
1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.2ColumnmacFilterPortMacCountread-writecurrentThe total number of MAC addresses allowed for the port.
1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.3ColumnmacFilterPortFilterModeread-writecurrentThe mac filter mode (accept or deny) for the port.
1.3.6.1.4.1.890.1.5.5.6.10.53.2ScalarmaxNumOfMacFiltersInSystemread-onlycurrentThe max number of mac filters supported in the system.
1.3.6.1.4.1.890.1.5.5.6.10.53.3ScalarmaxNumOfMacFiltersPerPortread-onlycurrentThe max number of mac filters supported per port.
1.3.6.1.4.1.890.1.5.5.6.10.53.4ScalarcurrNumOfMacFiltersInSystemread-onlycurrentThe current number of mac filters in the system.
1.3.6.1.4.1.890.1.5.5.6.10.53.5TablemacFilterTablenot-accessiblecurrentA table that contains the mac filter addresses.
1.3.6.1.4.1.890.1.5.5.6.10.53.5.1RowmacFilterEntrynot-accessiblecurrentThe entry of macFilterTable.
1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.1ColumnmacFilterAddrread-onlycurrentThe mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.2ColumnmacFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.5.6.10.53.6NodemacfilterBatchSet
1.3.6.1.4.1.890.1.5.5.6.10.53.6.1ScalarmacfilterTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis)…
1.3.6.1.4.1.890.1.5.5.6.10.53.6.2ScalarmacfilterOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable…
1.3.6.1.4.1.890.1.5.5.6.10.53.6.3ScalarmacFilterMacCountForBatchSetread-writecurrentThe total number of MAC addresses allowed for a port.
1.3.6.1.4.1.890.1.5.5.6.10.53.7TableouiFilterTablenot-accessiblecurrentA table that contains the OUI filter addresses.
1.3.6.1.4.1.890.1.5.5.6.10.53.7.1RowouiFilterEntrynot-accessiblecurrentThe entry of ouiFilterTable.
1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.1ColumnouiFilterAddrread-onlycurrentThe first three bytes of the mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.2ColumnouiFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.5.6.10.53.8ScalarmaxNumOfOuiFiltersPerPortread-onlycurrentThe max number of OUI filters supported per port.
1.3.6.1.4.1.890.1.5.5.6.10.53.9TableouiFilterPortTablenot-accessiblecurrentThis table includes the status of oui filtering for each port.
1.3.6.1.4.1.890.1.5.5.6.10.53.9.1RowouiFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.1ColumnouiFilterPortEnableread-writecurrentEnable/disable oui filtering for the port.
1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.2ColumnouiFilterPortFilterModeread-writecurrentThe oui filter mode (accept or deny) for the port.
1.3.6.1.4.1.890.1.5.5.6.10.55NodedhcpSnoop
1.3.6.1.4.1.890.1.5.5.6.10.55.1TabledhcpSnoopPortTablenot-accessiblecurrentThis table includes DHCP snooping enable/disable for each port.
1.3.6.1.4.1.890.1.5.5.6.10.55.1.1RowdhcpSnoopPortEntrynot-accessiblecurrentAn entry of dhcpSnoopPortTable.
1.3.6.1.4.1.890.1.5.5.6.10.55.1.1.1ColumndhcpSnoopEnableread-writecurrentEnable/disable DHCP snooping for a port.
1.3.6.1.4.1.890.1.5.5.6.10.55.2ScalardhcpSnoopTargetread-writecurrentThis managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of …
1.3.6.1.4.1.890.1.5.5.6.10.55.3ScalardhcpSnoopOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
1.3.6.1.4.1.890.1.5.5.6.10.55.4TabledhcpStaticTablenot-accessiblecurrentThis table defines DHCP static IP addresses.
1.3.6.1.4.1.890.1.5.5.6.10.55.4.1RowdhcpStaticEntrynot-accessiblecurrentAn entry of dhcpStaticTable.
1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.1ColumndhcpStaticIpAddrread-onlycurrentThe IP address which can pass through the port.
1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.2ColumndhcpStaticRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.5.6.10.55.5ScalarmaxNumOfDhcpStaticIpread-onlycurrentThe maximum number of DHCP static IP addresses which can be created for a port.
1.3.6.1.4.1.890.1.5.5.6.10.55.6ScalardhcpSnoopLan2lanEnableread-writecurrentEnable/disable DHCP snoop lan2lan function.
1.3.6.1.4.1.890.1.5.5.6.10.56Nodeacl
1.3.6.1.4.1.890.1.5.5.6.10.56.1TableaclSetTablenot-accessiblecurrentaclsetTable.
1.3.6.1.4.1.890.1.5.5.6.10.56.1.1RowaclSetEntrynot-accessiblecurrentAn entry of aclSetTable.
1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.1ColumnaclSetVpiread-onlycurrentVPI value
1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.2ColumnaclSetVciread-onlycurrentVCI value
1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.3ColumnaclSetProfileNameread-onlycurrentACL Profile name
1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.4ColumnaclSetRowStatusread-writecurrentRowStatus of aclSetEntry
1.3.6.1.4.1.890.1.5.5.6.10.56.2TableaclProfileTablenot-accessiblecurrentaclProfileTable.
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1RowaclProfileEntrynot-accessiblecurrentAn entry of aclProfileTable.
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.1ColumnaclProfileRuleNameread-onlycurrentProfile rule name
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.2ColumnaclProfileRuleNumberread-writecurrentThe managed object is for acl profile rule configuration. etype <etype> vlan <vid> (1), etype <etype> smac <mac> (2), etype <etype> dmac <mac> (3), vlan <vid> …
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.3ColumnaclProfileActionNumberread-writecurrentProfile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.4ColumnaclProfileRuleParamMaskread-writecurrentProfile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <…
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.5ColumnaclProfileRuleEtyperead-writecurrentProfile rule etype
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.6ColumnaclProfileRuleVidread-writecurrentProfile rule vid
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.7ColumnaclProfileRuleSmacread-writecurrentProfile rule source MAC
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.8ColumnaclProfileRuleDmacread-writecurrentProfile rule destination MAC
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.9ColumnaclProfileRulePriorityread-writecurrentProfile rule priority
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.10ColumnaclProfileRuleProtocolread-writecurrentProfile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.11ColumnaclProfileRuleSrcIPread-writecurrentProfile rule source IP
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.12ColumnaclProfileRuleSrcIPMaskread-writecurrentThe subnet mask of source IP mask
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.13ColumnaclProfileRuleDestIPread-writecurrentProfile rule source IP
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.14ColumnaclProfileRuleDestIPMaskread-writecurrentThe subnet mask of dest IP mask
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.15ColumnaclProfileRuleStartTosread-writecurrentProfile rule start type of service
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.16ColumnaclProfileRuleEndTosread-writecurrentProfile rule end type of service
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.17ColumnaclProfileRuleSrcStartPortread-writecurrentProfile rule source start port
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.18ColumnaclProfileRuleSrcEndPortread-writecurrentProfile rule source end port
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.19ColumnaclProfileRuleDestStartPortread-writecurrentProfile rule destination start port
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.20ColumnaclProfileRuleDestEndPortread-writecurrentProfile rule destination end port
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.21ColumnaclProfileActionRateread-writecurrentProfile action to replace to this rate
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.22ColumnaclProfileActionrvlanread-writecurrentProfile action to replace to this vlan
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.23ColumnaclProfileActionrpriread-writecurrentProfile action to replace to this priority
1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.24ColumnaclProfileRowStatusread-writecurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.5.6.10.57NodepppoeAgent
1.3.6.1.4.1.890.1.5.5.6.10.57.1TablepppoeAgentTablenot-accessiblecurrentA table that contains PPPoE DHCP Relay configuration.
1.3.6.1.4.1.890.1.5.5.6.10.57.1.1RowpppoeAgentEntrynot-accessiblecurrentAn entry of pppoeAgentTable.
1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.1ColumnpppoeAgentEnableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.2ColumnpppoeAgentInforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.3ColumnpppoeAgentRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.4ColumnpppoeAgentOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.890.1.5.5.6.10.57.2ScalarmaxNumOfPppoeAgentConfread-onlycurrentThe maximum number of rows that can be created in pppoeAgentTable.
1.3.6.1.4.1.890.1.5.5.6.11Nodesys
1.3.6.1.4.1.890.1.5.5.6.11.5NodeaccessCtrl
1.3.6.1.4.1.890.1.5.5.6.11.5.2TablesecuredClientTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.890.1.5.5.6.11.5.2.1RowsecuredClientEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.1ColumnsecuredClientIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.2ColumnsecuredClientStartIpread-writecurrentThe starting IP address of the secured client set.
1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.3ColumnsecuredClientEndIpread-writecurrentThe ending IP address of the secured client set.
1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.4ColumnsecuredClientServiceread-writecurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.5ColumnsecuredClientEnableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.890.1.5.5.6.11.8NodeextAlarm
1.3.6.1.4.1.890.1.5.5.6.11.8.1TableextAlarmTablenot-accessiblecurrentA table that contains external alarm information.
1.3.6.1.4.1.890.1.5.5.6.11.8.1.1RowextAlarmEntrynot-accessiblecurrentThe entry of external alarm table.
1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.1ColumnextAlarmIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.2ColumnextAlarmnameread-writecurrentThe external alarm name.
1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.3ColumnextAlarmstatusread-onlycurrentDispaly 'Normal' or 'Alarm' string
1.3.6.1.4.1.890.1.5.5.6.11.9Nodeuser
1.3.6.1.4.1.890.1.5.5.6.11.9.1ScalaruserAuthModeread-writecurrentUser authentication procsssing mode.
1.3.6.1.4.1.890.1.5.5.6.11.9.2ScalaruserAuthServerIpread-writecurrentThe IP address of the authentication server.
1.3.6.1.4.1.890.1.5.5.6.11.9.3ScalaruserAuthServerPortread-writecurrentThe port of the authentication server.
1.3.6.1.4.1.890.1.5.5.6.11.9.4ScalaruserAuthServerSecretread-writecurrentThe secret between the authentication server and the NE for authentication process.
1.3.6.1.4.1.890.1.5.5.6.11.9.5TableuserTablenot-accessiblecurrentA table that contains user information.
1.3.6.1.4.1.890.1.5.5.6.11.9.5.1RowuserEntrynot-accessiblecurrentAn entry of userTable.
1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.1ColumnuserNameread-onlycurrentThe user name.
1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.2ColumnuserPasswordread-createcurrentThe user password.
1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.3ColumnuserPriviledgeread-createcurrentThe user priviledge to decide what operation the user can and cannot do.
1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.4ColumnuserRowStatusread-createcurrentThe row status used to create or delete a user.
1.3.6.1.4.1.890.1.5.5.6.11.9.6ScalaruserAuthDefaultPriviledgeread-writecurrentThe user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
1.3.6.1.4.1.890.1.5.5.6.11.10ScalarsysSlotIdread-writecurrentDevice slot ID(0...255).
1.3.6.1.4.1.890.1.5.5.6.11.12ScalarstdioTimeoutread-writecurrentSet the stdio timeout, 0~360 minutes.
1.3.6.1.4.1.890.1.5.5.6.12Nodetrap
1.3.6.1.4.1.890.1.5.5.6.12.1Nodeobject
1.3.6.1.4.1.890.1.5.5.6.12.1.2ScalareqptAlarmInputIndexread-onlycurrentThe index of alarm input.
1.3.6.1.4.1.890.1.5.5.6.12.1.8ScalareqptAlarmInputNameread-onlycurrentThe Name of alarm input.
1.3.6.1.4.1.890.1.5.5.6.12.1.9ScalarsysMacAntiSpoofOrigread-onlycurrentThe Original port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.5.6.12.1.10ScalarsysMacAntiSpoofNewread-onlycurrentThe New port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.5.6.12.1.11ScalarsysMacAntiSpoofMACread-onlycurrentThe MAC of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.5.6.12.3Nodeequipment
1.3.6.1.4.1.890.1.5.5.6.12.3.1NotificationeqptHWMonitorFailurecurrentHardware monitor diagnosis is failed.
1.3.6.1.4.1.890.1.5.5.6.12.4Nodesystrap
1.3.6.1.4.1.890.1.5.5.6.12.4.1NotificationsysMacAntiSpoofingcurrentMAC Anti-spoofing.
1.3.6.1.4.1.890.1.5.5.6.12.4.2NotificationsysAlarmCutoffEnablecurrentAlarm cutoff is activated.
1.3.6.1.4.1.890.1.5.5.6.12.4.3NotificationsysAlarmClearEnablecurrentAlarm clear is activated.
1.3.6.1.4.1.890.1.5.5.6.12.4.4NotificationsysLoginFailurecurrentUser login is failed.
1.3.6.1.4.1.890.1.5.5.6.13Nodestatistics
1.3.6.1.4.1.890.1.5.5.6.13.1ScalarigmpQueryCntTotalread-onlycurrentThe total number of IGMP query messages received.
1.3.6.1.4.1.890.1.5.5.6.13.2ScalarigmpReportCntTotalread-onlycurrentThe total number of IGMP report messages received.
1.3.6.1.4.1.890.1.5.5.6.13.3ScalarigmpLeaveCntTotalread-onlycurrentThe total number of IGMP leave messages received.
1.3.6.1.4.1.890.1.5.5.6.13.4ScalarigmpNumOfActiveGroupsread-onlycurrentThe total number of IGMP learned groups.
1.3.6.1.4.1.890.1.5.5.6.13.5TableigmpGroupTablenot-accessiblecurrentThis table includes igmp group information.
1.3.6.1.4.1.890.1.5.5.6.13.5.1RowigmpGroupEntrynot-accessiblecurrentAn entry in igmpGroupTable.
1.3.6.1.4.1.890.1.5.5.6.13.5.1.2ColumnigmpGroupvidread-onlycurrentvlan id
1.3.6.1.4.1.890.1.5.5.6.13.5.1.3ColumnigmpGroupnumberOfMembersread-onlycurrentnumber Of Members
1.3.6.1.4.1.890.1.5.5.6.13.6TableigmpGroupPortTablenot-accessiblecurrentThis table includes igmp Group port information.
1.3.6.1.4.1.890.1.5.5.6.13.6.1RowigmpGroupPortEntrynot-accessiblecurrentAn entry in igmpGroupPortTable.
1.3.6.1.4.1.890.1.5.5.6.13.6.1.2ColumnigmpGroupPortvidread-onlycurrentIgmp Group vid
1.3.6.1.4.1.890.1.5.5.6.13.7TableigmpGroupTableV2not-accessiblecurrentA table that displays IGMP learned group member information.
1.3.6.1.4.1.890.1.5.5.6.13.7.1RowigmpGroupEntryV2not-accessiblecurrentAn entry of igmpGroupTableV2.
1.3.6.1.4.1.890.1.5.5.6.13.7.1.1ColumnigmpGroupVidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.5.6.13.7.1.2ColumnigmpGroupIpread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.5.6.13.7.1.3ColumnigmpGroupNumOfMembersread-onlycurrentThe number of member ports in the group.
1.3.6.1.4.1.890.1.5.5.6.13.7.1.4ColumnigmpGroupMemberPortsread-onlycurrentThe member port list of the group.
1.3.6.1.4.1.890.1.5.5.6.13.8TableigmpGroupPortTableV2not-accessiblecurrentA table that displays IGMP joined groups in this port.
1.3.6.1.4.1.890.1.5.5.6.13.8.1RowigmpGroupPortEntryV2not-accessiblecurrentAn entry of igmpGroupPortTableV2.
1.3.6.1.4.1.890.1.5.5.6.13.8.1.1ColumnigmpGroupPortVidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.5.6.13.8.1.2ColumnigmpGroupPortIpread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.5.6.13.8.1.3ColumnigmpGroupPortSourceIpread-onlycurrentThe source IP address that joins the IGMP group.
1.3.6.1.4.1.890.1.5.5.6.13.9TableigmpPortCtrlPduTablenot-accessiblecurrentA table that displays IGMP related counter values in this port.
1.3.6.1.4.1.890.1.5.5.6.13.9.1RowigmpPortCtrlPduEntrynot-accessiblecurrentAn entry of igmpPortCtrlPduTable.
1.3.6.1.4.1.890.1.5.5.6.13.9.1.1ColumnigmpPortCtrlPduQueryCntread-onlycurrentThe total number of IGMP query messages received in this port.
1.3.6.1.4.1.890.1.5.5.6.13.9.1.2ColumnigmpPortCtrlPduReportCntread-onlycurrentThe total number of IGMP report messages received in this port.
1.3.6.1.4.1.890.1.5.5.6.13.9.1.3ColumnigmpPortCtrlPduLeaveCntread-onlycurrentThe total number of IGMP leave messages received in this port.
1.3.6.1.4.1.890.1.5.5.6.13.9.1.4ColumnigmpPortNumOfActiveGroupsread-onlycurrentThe total number of active IGMP groups in this port.
1.3.6.1.4.1.890.1.5.5.6.13.11NodedhcpStats
1.3.6.1.4.1.890.1.5.5.6.13.11.1TabledhcpSnoopIpTablenot-accessiblecurrentThis table shows the IP addresses and netmasks offered by the DHCP server.
1.3.6.1.4.1.890.1.5.5.6.13.11.1.1RowdhcpSnoopIpEntrynot-accessiblecurrentAn entry of dhcpSnoopIpTable.
1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.1ColumndhcpSnoopIpread-onlycurrentThe snooped IP address.
1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.2ColumndhcpSnoopMacread-onlycurrentThe snooped MAC address.
1.3.6.1.4.1.890.1.5.5.6.13.11.2TabledhcpSnoopCounterTablenot-accessiblecurrentThis table shows the DHCP statistics.
1.3.6.1.4.1.890.1.5.5.6.13.11.2.1RowdhcpSnoopCounterEntrynot-accessiblecurrentAn entry of dhcpSnoopCounterTable.
1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.1ColumndhcpDiscoveryread-onlycurrentThe total number of received DHCP server discovery packets.
1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.2ColumndhcpOfferread-onlycurrentThe total number of received DHCP server offer packets.
1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.3ColumndhcpRequestread-onlycurrentThe total number of received DHCP IP request packets.
1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.4ColumndhcpAckread-onlycurrentThe total number of received DHCP IP acknowledge packets.
1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.5ColumndhcpAckBySnoopFullread-onlycurrentThe total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.
1.3.6.1.4.1.890.1.5.5.6.13.12NodepaepvcStats
1.3.6.1.4.1.890.1.5.5.6.13.12.1TablepaepvcSessionTablenot-accessiblecurrentThis table shows the paepvc session statistics.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1RowpaepvcSessionEntrynot-accessiblecurrentAn entry of paepvcSessionTable.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.1ColumnpaepvcSessionVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.2ColumnpaepvcSessionVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.3ColumnpaepvcSessionStateread-onlycurrentThe PAEPVC status.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.4ColumnpaepvcSessionIdread-onlycurrentThe PAEPVC session ID.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.5ColumnpaepvcSessionUptimeread-onlycurrentThe PAEPVC session uptime.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.6ColumnpaepvcSessionacnameread-onlycurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.7ColumnpaepvcSessionsrvcnameread-onlycurrentService name.
1.3.6.1.4.1.890.1.5.5.6.13.12.2TablepaepvcCountTablenot-accessiblecurrentThis table shows the paepvc counters.
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1RowpaepvcCountEntrynot-accessiblecurrentAn entry of paepvcCountTable.
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.1ColumnpaepvcCountVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.2ColumnpaepvcCountVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.3ColumnpaepvcCountPppLcpCfgReqRxread-onlycurrentThe number of ppp lcp config-request received.
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.4ColumnpaepvcCountPppLcpEchoReqRxread-onlycurrentThe number of ppp lcp echo-request received.
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.5ColumnpaepvcCountPppLcpEchoReplyRxread-onlycurrentThe number of ppp lcp echo-reply received.
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.6ColumnpaepvcCountPadiTxread-onlycurrentThe number of pppoe padi transfered
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.7ColumnpaepvcCountPadoRxread-onlycurrentThe number of pppoe pado received
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.8ColumnpaepvcCountPadrTxread-onlycurrentThe number of pppoe padr transfered
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.9ColumnpaepvcCountPadsRxread-onlycurrentThe number of pppoe pads received
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.10ColumnpaepvcCountPadtTxread-onlycurrentThe number of pppoe padt transfered
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.11ColumnpaepvcCountPadtRxread-onlycurrentThe number of pppoe padt received
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.12ColumnpaepvcCountSrvcnameErrRxread-onlycurrentThe number of pppoe service name error received
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.13ColumnpaepvcCountAcSystemErrRxread-onlycurrentThe number of pppoe access concentrator name error received
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.14ColumnpaepvcCountGenericErrTxread-onlycurrentThe number of pppoe generic error transfered
1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.15ColumnpaepvcCountGenericErrRxread-onlycurrentThe number of pppoe generic error received
1.3.6.1.4.1.890.1.5.5.6.13.13NodemacStats
1.3.6.1.4.1.890.1.5.5.6.13.13.1ScalarmacDisplayTargetread-writecurrentThis managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the sy…
1.3.6.1.4.1.890.1.5.5.6.13.13.2TablemacTablenot-accessiblecurrentA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.890.1.5.5.6.13.13.2.1RowmacEntrynot-accessiblecurrentAn entry of macTable.
1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.1ColumnmacAddressread-onlycurrentA unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.2ColumnmacPortread-onlycurrentThe port from which the mac address has been learned.
1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.3ColumnmacStatusread-onlycurrentThe status of this entry.
1.3.6.1.4.1.890.1.5.5.6.13.14NodeshdslStats
1.3.6.1.4.1.890.1.5.5.6.13.14.1TableshdslLinePerfTablenot-accessiblecurrentThe table displays SHDSL line performance.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1RowshdslLinePerfEntrynot-accessiblecurrentAn entry of shdslLinePerfTable.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.1ColumnshdslLinePerfEsread-onlycurrentCount of Errored Seconds (ES) on this endpoint since link up.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.2ColumnshdslLinePerfSesread-onlycurrentCount of Severely Errored Seconds (SES) on this endpoint since link up.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.3ColumnshdslLinePerfCrcread-onlycurrentCount of CRC anomalies on this endpoint since link up.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.4ColumnshdslLinePerfLoswsread-onlycurrentCount of Loss of Sync Word (LOSW) Seconds on this endpoint since link up.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.5ColumnshdslLinePerfUasread-onlycurrentCount of Unavailable Seconds (UAS) on this endpoint since link up.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.6ColumnshdslLinePerfSegmentAnomaliesread-onlycurrentCount of Segment Anomalies on this endpoint since link up.
1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.7ColumnshdslLinePerfSegmentDefectread-onlycurrentCount of Segment Defects on this endpoint since link up.
1.3.6.1.4.1.890.1.5.5.6.13.51NodegbondStats
1.3.6.1.4.1.890.1.5.5.6.13.51.1TablegbondStateTablenot-accessiblecurrentA table containing the G.Bond configuration information for each bonding group of the device.
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1RowgbondStateEntrynot-accessiblecurrentAn entry of gbondTable.
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.1ColumngbondStateNameread-onlycurrentAn administratively assigned string, which identifies the bonding group.
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.2ColumngbondStateSidread-onlycurrentThis object indicates the sequence index mode of the bonding group.
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.3ColumngbondStateUpRateread-onlycurrentThe current up stream rate.
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.4ColumngbondStateDownRateread-onlycurrentThe current down stream rate.
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.5ColumngbondStateMemberread-onlycurrentIndicate if the port is a member port of the bonding group. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 B…
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.6ColumngbondStatelinkupread-onlycurrentIndicate if the link status of port is bidirectional. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~…
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.7ColumngbondStateTxread-onlycurrentIndicate if the link status of port is Tx only. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: eac…
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.8ColumngbondStateRxread-onlycurrentIndicate if the link status of port is Rx only. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: eac…
1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.9ColumngbondStatelinkdownread-onlycurrentIndicate if the link status of the port is down. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: ea…
1.3.6.1.4.1.890.1.5.5.6.14Nodeclear
1.3.6.1.4.1.890.1.5.5.6.14.1ScalarcounterClearTargetread-writecurrentThis managed object is used for identify the target on which the counter would be cleared. The target is encoded as: Byte 1: reserved Byte 2~3: reserved Byte 4…
1.3.6.1.4.1.890.1.5.5.6.14.2ScalarcounterClearOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3…
1.3.6.1.4.1.890.1.5.5.6.14.3ScalarcounterClearVpiread-writecurrentVPI of the pvc whose counters would be cleared.
1.3.6.1.4.1.890.1.5.5.6.14.4ScalarcounterClearVciread-writecurrentVCI of the pvc whose counters would be cleared.
MIB Viewer