ZYXEL-SESCOMMON-MIB
32 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-TC | RowStatus |
| ZYXEL-MIB | sesSeriesCommon |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.5.5.1.1 | TablesesLineStatusTable | not-accessible | mandatory | This table contains the current status of SHDSL line. These managed objects are supported by ZyXEL SDSL access switches. |
| 1.3.6.1.4.1.890.1.5.5.1.1.1 | RowsesLineStatusEntry | not-accessible | mandatory | An zyxelLineStatusEntry containing the specific status for a particular SHDSL interface. |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.1 | ColumnsesLineUptime | read-only | mandatory | The time duration since the connection between STU-C STU-R is last setup. |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.2 | ColumnsesLineLinkDown | read-only | mandatory | The number of link down since the SAM-1008 was last restarted. |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.3 | ColumnsesLineNMdefect | read-only | mandatory | Count of noise margin defects |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.4 | ColumnsesLineHECdefect | read-only | mandatory | Count of HEC defects |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.5 | ColumnsesLineTxPackets | read-only | mandatory | Count of line Tx packets |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.6 | ColumnsesLineRxPackets | read-only | mandatory | Count of line Rx packets |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.7 | ColumnsesLineTxFrames | read-only | mandatory | Count of line Tx frames |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.8 | ColumnsesLineRxFrames | read-only | mandatory | Count of line Rx frames |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.9 | ColumnsesLineTxCells | read-only | mandatory | Count of line Tx cells |
| 1.3.6.1.4.1.890.1.5.5.1.1.1.10 | ColumnsesLineRxCells | read-only | mandatory | Count of line Rx cells |
| 1.3.6.1.4.1.890.1.5.5.1.2 | ScalarsesMaxNumOfProfiles | read-only | mandatory | The maximum number of SHDSL profiles which the system supports. |
| 1.3.6.1.4.1.890.1.5.5.1.3 | TablesesLineConfTable | not-accessible | mandatory | This table includes common attributes describing the SHDSL line. |
| 1.3.6.1.4.1.890.1.5.5.1.3.1 | RowsesLineConfEntry | not-accessible | mandatory | An entry in sesLineConfTable. |
| 1.3.6.1.4.1.890.1.5.5.1.3.1.1 | ColumnsesLineConfEncap | read-write | mandatory | The encapsulation of the SHDSL line. |
| 1.3.6.1.4.1.890.1.5.5.1.3.1.2 | ColumnsesLineConfVpi | read-write | mandatory | The VPI of the SHDSL line. |
| 1.3.6.1.4.1.890.1.5.5.1.3.1.3 | ColumnsesLineConfVci | read-write | mandatory | The VCI of the SHDSL line. |
| 1.3.6.1.4.1.890.1.5.5.1.4 | ScalarsesMaxNumOfPortBondings | read-only | mandatory | The maximum number of port bondings which the system supports. |
| 1.3.6.1.4.1.890.1.5.5.1.5 | TablesesPortBondingTable | not-accessible | mandatory | This table includes the configuration of port bonding. |
| 1.3.6.1.4.1.890.1.5.5.1.5.1 | RowsesPortBondingEntry | not-accessible | mandatory | An entry in sesPortBondingTable. |
| 1.3.6.1.4.1.890.1.5.5.1.5.1.1 | ColumnsesPortBondingName | not-accessible | mandatory | This object is used by the port bonding table in order to identify a row of this table. |
| 1.3.6.1.4.1.890.1.5.5.1.5.1.2 | ColumnsesPortBondingNumOfMembers | read-write | mandatory | The number of members included in the bonding entry. |
| 1.3.6.1.4.1.890.1.5.5.1.5.1.3 | ColumnsesPortBondingMemberList | read-write | mandatory | The member list is included in the bonding entry. Each member is identified by two octets. In the 2-wire mode, each member stands for a single port. In the 4-w… |
| 1.3.6.1.4.1.890.1.5.5.1.5.1.4 | ColumnsesPortBondingMode | read-write | mandatory | The mode in which the bonding entry is. twoWireC mode stands for 2-wire plus stu-c, and so on. |
| 1.3.6.1.4.1.890.1.5.5.1.5.1.5 | ColumnsesPortBondingRowStatus | read-write | mandatory | To delete an existing row in this table. |
| 1.3.6.1.4.1.890.1.5.5.1.6 | TablesesNwireTable | not-accessible | mandatory | This table includes N-wire configurations. |
| 1.3.6.1.4.1.890.1.5.5.1.6.1 | RowsesNwireEntry | not-accessible | mandatory | An entry in sesNwireTable. |
| 1.3.6.1.4.1.890.1.5.5.1.6.1.1 | ColumnsesNwireGroupName | not-accessible | mandatory | This object is used by the N-wire table in order to identify a row of this table. |
| 1.3.6.1.4.1.890.1.5.5.1.6.1.2 | ColumnsesNwireGroupNumber | read-write | mandatory | The group number included in the N-wire entry. Each group is identified by two octets. In the 4-wire mode: Group1 stands for Port1 and Port2 Group2 stands for … |
| 1.3.6.1.4.1.890.1.5.5.1.6.1.3 | ColumnsesNwireMode | read-write | mandatory | The mode in which the N-wire entry is. fourWireC mode stands for 4-wire plus stu-c, and so on. |
| 1.3.6.1.4.1.890.1.5.5.1.6.1.4 | ColumnsesNwireRowStatus | read-write | mandatory | To delete an existing row in this table. |