ZYXEL-SFLOW-MIB
21 objects
The subtree for sFlow
Imported Objects
| BRIDGE-MIB | -- RFC2579 dot1dBasePort |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| ZYXEL-ES-SMI | -- RFC2851 esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.75 | IdentityzyxelSflow | The subtree for sFlow | ||
| 1.3.6.1.4.1.890.1.15.3.75.1 | NodezyxelSflowSetup | |||
| 1.3.6.1.4.1.890.1.15.3.75.1.1 | ScalarzySflowState | read-write | current | Enable/Disable sflow on the switch. sFlow (RFC 3176) is a standard technology for monitoring switched networks. An sFlow agent embedded on a switch or router g… |
| 1.3.6.1.4.1.890.1.15.3.75.1.2 | ScalarzySflowMaxNumberOfCollectors | read-only | current | The maximum number of sFlow collectors entries that can be created. |
| 1.3.6.1.4.1.890.1.15.3.75.1.3 | TablezyxelSflowCollectorTable | not-accessible | current | The table contains sFlow collector configuration. |
| 1.3.6.1.4.1.890.1.15.3.75.1.3.1 | RowzyxelSflowCollectorEntry | not-accessible | current | An entry contains sFlow collector configuration. |
| 1.3.6.1.4.1.890.1.15.3.75.1.3.1.1 | ColumnzySflowCollectorIpAddressType | not-accessible | current | The Type of IP address for sflow collector entry. |
| 1.3.6.1.4.1.890.1.15.3.75.1.3.1.2 | ColumnzySflowCollectorIpAddress | not-accessible | current | The IP address of the sFlow collector. |
| 1.3.6.1.4.1.890.1.15.3.75.1.3.1.3 | ColumnzySflowCollectorUdpPort | read-write | current | Enter a UDP port number the Switch uses to send sFlow datagram to the collector. If you change the port here, make sure you change it on the collector, too. Th… |
| 1.3.6.1.4.1.890.1.15.3.75.1.3.1.4 | ColumnzySflowCollectorRowStatus | read-create | current | This object allow entry to be create and deleted a sFlow collector entry. |
| 1.3.6.1.4.1.890.1.15.3.75.1.4 | TablezyxelSflowPortTable | not-accessible | current | The table contains sFlow port configuration. |
| 1.3.6.1.4.1.890.1.15.3.75.1.4.1 | RowzyxelSflowPortEntry | not-accessible | current | An entry contains sFlow port configuration. |
| 1.3.6.1.4.1.890.1.15.3.75.1.4.1.1 | ColumnzySflowPortState | read-write | current | Enable/Disable sflow on the port. |
| 1.3.6.1.4.1.890.1.15.3.75.1.5 | ScalarzySflowMaxNumberOfPortCollectors | read-only | current | The maximum number of sFlow port collectors entries that can be created. |
| 1.3.6.1.4.1.890.1.15.3.75.1.6 | TablezyxelSflowPortCollectorTable | not-accessible | current | The table contains sFlow port collector configuration. |
| 1.3.6.1.4.1.890.1.15.3.75.1.6.1 | RowzyxelSflowPortCollectorEntry | not-accessible | current | An entry contains sFlow port collector configuration. |
| 1.3.6.1.4.1.890.1.15.3.75.1.6.1.1 | ColumnzySflowPortCollectorIpAddressType | not-accessible | current | The Type of IP address for sflow port collector entry. |
| 1.3.6.1.4.1.890.1.15.3.75.1.6.1.2 | ColumnzySflowPortCollectorIpAddress | not-accessible | current | The IP address of the sFlow port collector. |
| 1.3.6.1.4.1.890.1.15.3.75.1.6.1.3 | ColumnzySflowPortCollectorSampleRate | read-write | current | Enter a number (N) from 256 to 65535. The switch captures every one out of N packets for this port and creates sFlow datagram. |
| 1.3.6.1.4.1.890.1.15.3.75.1.6.1.4 | ColumnzySflowPortCollectorPollInterval | read-write | current | Specify a time interval (from 20 to 120 in seconds) the switch waits before sending the sFlow datagram and packet counters for this port to the collector. |
| 1.3.6.1.4.1.890.1.15.3.75.1.6.1.5 | ColumnzySflowPortCollectorRowStatus | read-create | current | This object allows a sFlow port collector entry to be created and deleted. |